Professional Documents
Culture Documents
CM - 53 - ARGEAVBE - B1AAN Transfer Pump
CM - 53 - ARGEAVBE - B1AAN Transfer Pump
CM - 53 - ARGEAVBE - B1AAN Transfer Pump
35 70
30 60
25 50
20 40
15 30
10 20
5 10
0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 Q [m³/h]
P NPSH
[W] [m]
1500 P1 15
1000 10
P2
500 5
0 0
1/16
Submittal Data
274.2 71.6
205.5 Rp 1
Rp 3/8
Rp 1 1/4
208.3
165.3
10.5
Rp 3/8
75
125 96 132
Materials:
Pump housing: Stainless steel
Pump housing: AISI 316
Impeller: Stainless steel
Impeller: AISI 316
Impeller: EN 1.4401
Material code: G
Code for rubber: E
2/16
Company name:
Created by:
Phone:
Date: 13/10/2022
Qty. Description
1 CM 5-3 A-R-G-E-AVBE B1-A-A-N
Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge
port. Pump materials in contact with the liquid are in high-grade stainless steel. The mechanical shaft seal is a special
designed, unbalanced O-ring seal. Pipework connection is via internal Whitworth pipe threads, Rp (ISO 7/1).
Pump
A combination of a stop ring and a Nord-lock® washer secures a tight and reliable fixation of the impeller spacing
pipes to the splined pump shaft. It is possible to remove and fit the hydraulic parts from the pump side. The inlet and
outlet port are integrated in the pump sleeve. The inlet part, chambers and discharge part are hold together by four
staybolts and a retaining flange.
The pump is fitted with an unbalanced O-ring seal with a rigid torque-transmission system. It has a fixed seal driver
ensuring a reliable rotation of all parts. The dynamic secondary seal is an O-ring.
Seal faces:
• Rotating seal ring material: aluminium oxide (alumina)
• Stationary seat material: carbon graphite, resin-impregnated
Carbon graphite against alumina is a good all-round seal for not too demanding applications. The corrosion
resistance is often limited in water to a range between pH 5 and pH 10. Usage in liquids above 90 °C is not
recommended. The seal can handle dry-running conditions for short periods.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The pump shaft is connected to the motor shaft through a left thread and tight fit. The shaft cannot be dismantled.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to EN 50347. Electrical tolerances comply
with EN 60034.
Date: 13/10/2022
Qty. Description
1 Technical data
Controls:
Frequency converter: NONE
Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 90 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Technical:
Pump speed on which pump data are based: 3480 rpm
Rated flow: 5.64 m³/h
Rated head: 32.78 m
Code for shaft seal: AVBE
Approvals: CE,CULUS,EAC,CURUS,UKCA
Approvals for drinking water: ACS,NSF61,UBA
Curve tolerance: ISO9906:2012 3B
Materials:
Pump housing: Stainless steel
EN 1.4401
AISI 316
Impeller: Stainless steel
EN 1.4401
AISI 316
Installation:
Range of ambient temperature: -20 .. 55 °C
Maximum operating pressure: 10 bar
Max pressure at stated temp: 10 bar / 40 °C
6 bar / 90 °C
Type of connection: Rp
Size of inlet connection: 1 1/4 inch
Size of outlet connection: 1 inch
Outlet position: 12
Electrical data:
Motor standard: IEC
Frame size: 80BA
Rated power - P2: 1.1 kW
Mains frequency: 60 Hz
Suitable for 50/60 Hz: N
Rated voltage: 1 x 115/230 V V
Service factor: 1.00
Rated current: 14.6/7.3 A
Starting current: 320-320 %
Rated speed: 3320 rpm
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Built-in motor protection: NONE
Cable included (Yes/No): N
Others:
Terminal box position: 12
Minimum efficiency index, MEI ≥: 0.7
Net weight: 14.9 kg
Date: 13/10/2022
Qty. Description
1 Gross weight: 17.4 kg
Date: 13/10/2022
40 80
35 70
30 60
25 50
20 40
15 30
10 20
5 10
0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 Q [m³/h]
P NPSH
[W] [m]
1400 P1 14
1200 12
1000 10
P2
800 8
600 6
400 4
200 2
0 0
Date: 13/10/2022
H CM 5-3, 1*230 V, 60Hz eta
Description Value [m] [%]
Pumped liquid = Water
General information: 45 Liquid temperature during operation = 20 °C 90
Technical:
Pump speed on which pump data are 30 60
3480 rpm
based:
Rated flow: 5.64 m³/h 25 50
Impeller: EN 1.4401
Impeller: AISI 316 1000 10
P2
Material code: G
Code for rubber: E 500 5
Installation:
Range of ambient temperature: -20 .. 55 °C 0 0
158
125
107.5
132
96
137
213.8
208.3
165.3
Rp 3/8
1 1/4
10.5
Rp 3/8Rp 1 205.5
71.6 274.2
10.5
Outlet position: 12 Rp 3/8
75
Connect code: R
125 96 132
Liquid: 158 213.8 107.5
137
Pumped liquid: Water 345.8
U1 V1 W1
Cable included (Yes/No): N
6 4 1
Controls:
N L
Frequency converter: NONE
Date: 13/10/2022
Description Value
Others:
Terminal box position: 12
Minimum efficiency index, MEI ≥: 0.7
Net weight: 14.9 kg
Gross weight: 17.4 kg
Date: 13/10/2022
cos phi
0.8 8
eta
0.6 6
0.4 4
0.2 2
0.0 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 P2 [kW]
n P1
[rpm] [kW]
3400 2.0
3200 1.6
P1
3000 1.2
2800 0.8
2600 0.4
2400 0.0
Date: 13/10/2022
Rp 1 1/4
Rp 3/8
Rp 1
107.5
71.6
132
345.8
96
137
274.2
213.8
208.3
165.3
75
205.5
125
158
Rp 3/8
10.5
Date: 13/10/2022
HIGH VOLTAGE
5 3 2
SUITABLE FOR FIELD CONNECTION
W2 U2 V2
U1 V1 W1
6 4 1
N L
LOW VOLTAGE
5 3 2
W2 U2 V2
884422
U1 V1 W1
6 4 1
N L
Date: 13/10/2022
Order Data:
Position Your pos. Product name Amount Product No Total
CM 5-3 1 On request Price on
request
Date: 13/10/2022
( MG 71/80, MG 90/100 )
MG71/80
164e 151a
156
159a 151
164d
181
150 152
164g
159
164c 154
51
164b
153
155
191
79
157a
156b 158 28g MG90/100
164e
151a
159a
164f
181 151
158a
152
164
156a
156
51
150
153
155 191
79
157a 32
158
159
156b 28g 31
154
49
4d
64
49
4
158a 64
4a
47a
4e
64c
67
16
11 104
25 111
6a 108
112
26 64a 102
103
107
66
111a
Date: 13/10/2022
Sectional drawing
165x100
Date: 13/10/2022
Spare parts CM 5-3, Product No. On request
Produced After 0907 (production year and week number)
Date: 13/10/2022
Pos Description Annotation Classification Data Part no. Qty. Unit
Material type: FKM
Thickness: 3,18
107 O-ring 1
108 Compression spring 1
111a Stop ring 1
111 Retainer 1
112 Driver for shaft seal 1
- 4 Chamber cpl. 97690021 1 pcs
45 Neck ring 96536194 1
65 Neck ring retainer 99490745 1
65 Neck ring retainer 99490747 1
+ 4 Chamber cpl. 96547663 1 pcs
+ 4 Chamber cpl. 98371223 1 pcs
- 5a Chamber cpl. 98371222 1 pcs
65 Retainer for seal ring 99812852 1
+ 5a Chamber cpl. 97564654 1 pcs
6a Flange 99094311 1 pcs
16 Collar sleeve cpl. 98470968 1 pcs
26 Hex socket head cap screw Length (mm): 80 99611589 4 pcs
Thread: M8
31 O-ring Diameter: 114 98345019 1 pcs
Material type: EPDM
Thickness: 3,9
+ 32 Cover 98821903 1 pcs
45 Neck ring 96536194 1 pcs
64a Spacing pipe 99952499 2 pcs
65 Retainer for seal ring 99812852 1 pcs
65 Neck ring retainer 99490745 1 pcs
65 Neck ring retainer 99490747 1 pcs
66 Wedge lock washer 96536157 1 pcs
66 Wedge lock washer 92575609 1 pcs
67 Lock nut Thread: M8 98277008 1 pcs
102 O-ring Diameter: 17,86 98277010 1 pcs
Material type: EPDM
Thickness: 2,62
103 Seal ring, stationary 98277428 1 pcs
104 Seal ring, rotating 98277426 1 pcs
107 O-ring 98275967 1 pcs
152 Cross recess countersunk screw 99332927 4 pcs
156 Fan 96591772 1 pcs
191 Base plate 97823648 1 pcs