Professional Documents
Culture Documents
Is PleurX-Drainage-Instructions QG en
Is PleurX-Drainage-Instructions QG en
Is PleurX-Drainage-Instructions QG en
Getting started
Get all drainage supplies ready and thoroughly wash your hands.
1 Open all packaging. Unfold blue 2 Tear open alcohol pads. 3 Pick up each glove by 4 Open pouch containing
wrapping. Place bottle near Lay open pouches on blue the wrist and put both of valve cap and let it fall onto
wrapping and lay access tip on wrapping a short distance from them on. sterile blue wrapping.
blue wrapping. sterile items.
5 Squeeze clamp on drainage line 6 Take valve cap off catheter. 7 Clean around valve opening 8 Insert access tip into
completely closed and remove with first alcohol pad. catheter valve.
cover from access tip.
Draining fluid
Do not drain more than 1000mL from your chest or 2000mL from your abdomen at any one time.
9 Remove support clip from 10 Release clamp on drainage line to 11 Squeeze clamp on drainage line completely
top of drainage bottle and begin draining. closed when finished draining.
push down “T” plunger.
12 Pull access tip out of 13 Clean around valve 14 Place new cap on catheter 15 Clean around
valve; set drainage opening with second valve and twist it until it snaps catheter site with
line down. alcohol pad. into its locked position. third alcohol pad.
16 Place foam catheter pad 17 Place self-adhesive dressing 18 Push down “T” plunger and 19 Remove flexible cap and
around catheter and wind over gauze pads and remove move plunger in a circular drainage line from bottle.
catheter on top of pad. Cover plastic covering. motion to further puncture
catheter with gauze pads. the foil seal so fluid can be 20 Empty bottle into toilet.
poured out. Place bottle in a plastic bag,
seal tightly and discard.
CareFusion
Waukegan, IL
carefusion.com