Professional Documents
Culture Documents
User Manual ICOM IC T3H E
User Manual ICOM IC T3H E
28 ` DTMF transmission speed 28 8 SCAN OPERATION 2933 ` Scan types 29 ` Programmed scan . 30 ` Memory (skip) scan.31 ` Priority watch . 32 ` Scan
resume condition . 33 9 SUBAUDIBLE TONES .3437 ` Tone squelch . 3435 ` Pocket beep operation . 36 ` Tone scan 37 10 PAGER/CODE SQUELCH 3844 `
Pager function. 38 ` Code programming . 3941 ` Pager operation 4243 ` Code squelch .
44 11 OTHER FUNCTIONS . 4553 ` Set mode . 4547 ` Initial set mode . 4852 ` CPU reset 53 12 CLONING . 54 13 OPTIONAL UNIT 55 14
SPECIFICATIONS 56 15 OPTIONS 5758 16 CE .
5960 vi 1 PANEL DESCRIPTION I Switches, controls, keys and connectors q u w Speaker e i Microphone o r t y q CONTROL DIAL [VOL] A Adjusts the
audio level. B Selects the operating channel or adjusts the squelch level. · The function B is available when [VOL] is assigned as "dial" in INITIAL SET
MODE (p. 50). w POWER SWITCH [POWER] Push for 1 sec.
to turn the power ON and OFF. e PTT SWITCH [PTT] Push and hold to transmit; release to receive. 1 PANEL DESCRIPTION 1 r SQUELCH SWITCH
[SQL] Push and hold to force the squelch open and to adjust the squelch level with [Y]/[Z] keys. t UP/DOWN KEYS [Y]/[Z] A Selects the operating channel
or adjusts the squelch level. B Adjusts the audio level. · The function B is available when [VOL] is assigned as "dial" in INITIAL SET MODE (p. 50). y KEY
PAD (pgs. 36) Used to enter operating frequency, the DTMF codes, etc. u ANTENNA CONNECTOR Connects the supplied antenna.
i [SP]/[MIC] JACK Connect an optional speaker-microphone or headset, if desired. The internal microphone and speaker will not function when either is
connected. D External connection NOTE: When connecting or disconnecting an external speaker-microphone, first turn the transceiver's power OFF. ø3.5
mm plug External speaker (Nominal impedance 8 ) SP SP GND [SP] jack SP (AF OUT) SP GND [MIC] jack MIC 5V MIC GND ø2.5 mm plug External
microphone (Nominal impedance 2 k) MIC 33 k MIC GND PTT o FUNCTION DISPLAY (pgs 7, 8) 2 1 PANEL DESCRIPTION D Key pad KEY [name]
FUNCTION SECONDARY FUNCTION (After [A·FUNC] is pushed) [A·FUNC] Access to secondary No function. function. Select the call chanNo function.
nel. (p.
19) Entering into memory programming/editing mode. (p. 24) Selects a memory P r o g r a m s / t r a n s f e r s VFO/memory or call channel mode. (p. 19)
contents into memory channel/VFO when pushed for 1 sec.
(pgs. 24, 25) Selects VFO mode, aborts direct frequency input, or can- No function. cels scanning, etc. (pgs. 16, 30) Input digit "1" during frequency input,
Selects the subaudible tone memory channel se- function.
(pgs. 21, 34) lection, etc. (pgs. 16, 19) Input digit "2" during frequency input, Turn the pocket beep funcmemory channel se- tion ON and OFF (p. 37) lection,
etc. (pgs. 16, 19) [B·CALL] [C·MR] [D·CLR] [1·TONE] [2·P.BEEP] 3 PANEL DESCRIPTION 1 D Key pad (Continued) KEY [name] FUNCTION
SECONDARY FUNCTION (After [A·FUNC] is pushed) [3·T.SCAN] Input digit "3" during frequency input, Starts the tone scanning. memory channel se(pgs.
23, 37) lection, etc. (pgs. 16, 19) Input digit "4" during frequency input, Selects a duplex function memory channel se- (duplex, +duplex, simplex). lection, etc.
(pgs. 16, (p. 21) 19) Input digit "5" during frequency input, memory channel se- Starts scanning. (p. 30) lection, etc. (pgs.
16, 19) Input digit "6" during frequency input, Sets and cancels skip setting memory channel se- for memory skip scan during lection, etc. (pgs. 16, memory
mode. (p. 31) 19) Input digit "7" during frequency input, Starts the priority watch.
memory channel se(p. 32) lection, etc. (pgs. 16, 19) Input digit "8" during frequency input, Enters into the SET MODE. memory channel se(p.
45) lection, etc. (pgs. 16, 19) 4 [4·DUP] [5·SCAN] [6·SKIP] [7·PRIO] [8·SET] 1 PANEL DESCRIPTION D Key pad (Continued) KEY [name] FUNCTION
SECONDARY FUNCTION (After [A·FUNC] is pushed) [9·HI/LO] Input digit "9" during frequency input, Switches between high and memory channel selow
output power. (p. 18) lection, etc. (pgs. 16, 19) Input digit "0" during frequency input, Enters into the DTMF memmemory channel seory mode. (p. 27)
[0·DTMF-M] lection, etc. (pgs.