GE HEALTHCARE PRECISION 500D® R&F SYSTEM - INSTALLATION
REVISION 11 DIRECTION 2297166-100
Figure 8-10 IUI Accessory Enclosure
Figure 8-11 IUI Enclosure without Modem Installed
Holes within enclosure allow it to be mounted in different positions and surfaces.
1.7 Optional (Purchased) Modem
The modem is a option that must be purchased separately. If your system is delivered with a modem installed, no action is required. If you have purchased the modem, perform the instructions that follow: 1.) Connect the Precision 500D Modem Enclosure Power Harness to the modem's power supply. 2.) Place the power supply in the enclosure as shown in Figure 8-12. 3.) Place the locking bracket over the power supply and secure it with the two nuts. 4.) Tighten the locking bracket until the power supply is snug against the enclosure where it does not move. 5.) Place the modem inside the enclosure and face it toward its power supply. See Figure 8-12. 6.) Place the locking bracket over the modem and secure it with the two nuts. 7.) Tighten the locking bracket until the modem is snug against the enclosure where it does not move. 8.) Connect the modems power supply to the modem. See Figure 8-12. 9.) Connect the modem control cable to the modem. See Figure 8-12.
Figure 8-12 IUI Accessory Assembly with modem installed