Professional Documents
Culture Documents
CAE - FEA Request Form
CAE - FEA Request Form
DOC No. : MH IMS DSN : 022 : F1
REV No. : 00 , DATE : 30/01/13
SR NO. ______
DATE : ______
CAE REQUEST FORM
A) GENERAL INFO :
Design Engineer* :
Immediate Supervisor* :
Head of Department* :
Ext No. :
B) PROJECT DETAILS :
Part No.* :
Component/ Assy Description :
Location of solid model* :
Brief background of project :
Function of comp/Assy :
Note : *Attach the drawings and documents
C) TECHNICAL DATA :
Aim of Analysis * :
Type of Analysis * :
(Static or Dynamic)
Material * :
Material ‐ std No./Grade *:
Yield strength (MPa) :
Ultimate tensile strength (MPa) :
Specify heat treatment details :
Hardness Data (In RC/BHN) :
Type of loading :
(Acceleration, Displacement, Force or Moment)
* Mandatory field
Prepared By: ‐ Ansari Naushad Approved By: V G Kulkarni Page 1 of 3
DOC No. : MH IMS DSN : 022 : F1
REV No. : 00 , DATE : 30/01/13
D) DYNAMIC LOADING DETAILS :
Operating frequency range * :
Response area * :
Mass Details and CG locations * :
Damping coefficient & Details * :
E) ANALYSIS DATA :
Specify benchmark model :
(if any applicable)
Failure photograph (Y/N)* :
Magnitude of loads / Torque* :
Specify locations of load / moment on assembly* :
Specify location of constraints* :
* Attach free body diagram
* Mandatory field
Prepared By: ‐ Ansari Naushad Approved By: V G Kulkarni Page 2 of 3
DOC No. : MH IMS DSN : 022 : F1
REV No. : 00 , DATE : 30/01/13
F) TESTING PLANNED AFTER CAE :
Lab Testing :
Expected cycle time :
Field testing :
Implements:
Others :
Special remarks :
* Mandatory field
Prepared By: ‐ Ansari Naushad Approved By: V G Kulkarni Page 3 of 3