In a truss member consisting of ISA 80 x 50 x 8 mm is
connected to transmit the working load of 550 kN. This member is connected to gusset plate of 12 mm thickness at the back and toe. Design the weld. IS 800:2007 ECCENTRIC WELDING CONNECTION Welding connection subjected to combination of shear, bending and twisting are considered as eccentric welding connection This type of connection is generally used in beam to column end connection. Bracket connection Bracket means a steel plate or a set of steel plates connected to columns to support beams. The bracket may be connected to a column using butt or fillet weld Bracket plates are used as a platform for another member to sit/rest on it. Welds are subjected to shear force and bending moment or twisting moment Bracket connection using Butt weld Butt weld is subjected to vertical shear force V = P and a bending moment M=P.e Consider a bracket connection to flange of a column by a full penetration butt weld Eccentric load P causes shear force P and moment at the weld section Shear stress in the weld due to factored load