Professional Documents
Culture Documents
vc99 3 67 DMM
vc99 3 67 DMM
vc99 3 67 DMM
1-5.Please move the test leads away from test points 2. TECHNICAL FEATURES
when switching the function. 2-1. Accuracy: ± (a% × reading data + digits),
1-6.Please don’t input voltage value when measuring environment temperature at (23±5)℃, relative humidity
VC99 3 6/7 DMM current. <75%, One year guarantee since production date.
1.SUMMARY 1-7.Please don’t modify the circuit. 2-2.DC Voltage(DCV)
This digital multimeter is a steady performance, 1-8.Introduction for safety symbol: Range Accuracy Resolution
600mV 0.1mV
battery-driven 3 6/7 digital multimeter. It uses the LCD
6V 1mV
“ ” exists high voltage; “ ” GND “ ” dual ±(0.5%+3)
with 23mm-high figure to make the reading clear and 60V 10mV
make operation more convenient. insulation “ ” must refer to manual “ ” Low battery. 600V 100mV
1000V ±(0.8%+3) 1V
The digital multimeter has the function of measuring
Input impedance: approx. 10MΩ
DCV, ACV, DCA, ACA, resistance, capacitance, 3. SPECIFICATION
Overload protection:1000V DC or 750V AC.
frequency, temperature, duty cycle, transistor and diode, 1. General features
2-3.AC Voltage(ACV)
continuity performance test .The meter can provide 1-1. Displaying: LCD; Range Accuracy Resolution
functions including analog bar and unit symbol display, 1-2.Max display: 6000(3 6/7) digits automatic polarity, 6V 1mV
60V ±(0.8%+5) 10mV
data holding, relative value measuring, maximal/minimal unit symbol and 61 section analog display;
600V 100mV
value measuring, auto/manual range switching 1-3. Measurement method: double integral A/D 750V ±(1.0%+5) 1V
(RANGE), auto power off and warning functions .it conversion; Input impedance: approx. 10MΩ
adopts double integral A/D converter as its core. It is an 1-4. Sampling rate: approx.3 times/sec. Overload protection:1000V DC or 750V AC.
ideal tool for labs, factories and radio-technology. 1-5. Over-range display: “OL” displayed in the highest Frequency response:(40~200)Hz under 750V ,other
digit. range:(40~400)Hz.
2.SAFTY NOTES: 1-6. Low battery display:“ ” Sine wave RMS(Average value response).
The instrument is designed according to IEC1010 1-7. Working environment: (0~40)℃, relative humidity: 2-4.DC Current(DCA)
standard (safety standard issued by International <80%; Range Accuracy Resolution
600uA 0.1μA
Electro technical Committee). Please read the following 1-8.Store environment: (-10~40)℃, relative humidity:
6000uA 1μA
±(1.0%+3)
before operation. <80%; 60mA 10μA
1-1.Check the connection and insulation of test leads to 1-9.Power supply:2pcs 1.5V battery(“AAA” battery); 600mA 100μA
6A 1mA
avoid electric shock. 1-10. Dimension: 185×93×35mm (length*width*height); ±(2.0%+5)
20A 10mA
1-2.Do not input a limited voltage higher than DC 1000V 1-11. Weight: approx..290g((including battery); MAX measurement voltage drop: : full range
or AC 750V when measuring ranges. 1-12.Accessories: test leads, user manual, temperature mA :300mV,A:100mV。
1-3.When measuring voltage higher than DC 60V, AC probe, holster, gift box, and 2*1.5V battery. Max input current: 20A (within 15 seconds)
40V, please be careful. Over load protection: 500mA/ 250V and 13A/250V
1-4. Select correct function and range to avoid fault fast molten fuse.
operation.
1. Don’t input the voltage value higher than DC 1000V Prepared: http://digitalchip.ru