Removing and installing reversing camera system control unitJ772 Page 1 of 1
Removing and installing reversing camera system control unit -J772-
– When renewing control unit, select “Replacement” function for appropriate control unit in “Guided Fault Finding”. To do so, use the vehicle diagnostic, testing and information system -VAS 5051-. – Switch off all electrical equipment. – Remove ignition key. Removing – Remove luggage compartment side trim (left-side) →General body repairs, interior; Rep. Gr.70.
– Unscrew nuts -1- and -3- (8 Nm).
Unplug connectors -2- and -4- at – reversing camera system control unit -J772--5-. – Detach reversing camera system control unit -J772--5- with bracket. Detaching bracket Two retaining brackets are bolted to reversing camera system control unit - J772-.
– Unscrew bolts -arrows- (3 Nm) and
detach brackets. Installing – First install brackets. Install reversing camera system – control unit -J772- proceeding in reverse order to the steps described for removal. – Perform calibration → Chapter.