Professional Documents
Culture Documents
Ford Wa 960-2004
Ford Wa 960-2004
1. SCOPE
This specification covers the material and performance requirements of ISO metric coarse threaded weld bolts
M4 to M12 inclusive.
2. REFERENCES
3. MATERIAL
All weld bolts shall be steel in accordance with WSD-M1A283-B1 through B6, B29, B30, B47, B48, or B49.
4. PERFORMANCE
For initial sample approval and for referee purposes in cases of dispute the following performance tests shall
apply.
After welding the bolt shall meet the Proof Load test in ISO 898/1 for the property class specified.
After detaching the weld bolt from the test panel, defined in Clause 5, by any method (i.e., pull-off, push-
off, peel-off, chisel-off), the weld area shall show that the detached bolt has pulled a slug of the test plate
material out of the test plate at all weld projection points.
5. TEST PANEL
The test panel shall be zinc coated steel in accordance with WSB-M1A250-C3 Grade 98G98G-HD. The
panel thickness shall be 1.5mm minimum.
Printed copies are uncontrolled Copyright © 2004, Ford Global Technologies, LLC. Page 1 of 1