Professional Documents
Culture Documents
pc20tk 1 44 11
pc20tk 1 44 11
2-7)
This functional mode is used to measure the DC current of a power circuit or other.
Warning: Be sure to measure current in series with the load. An attempt to measure current
in parallel with the load is dangerous as large current would flow through the
PC20TK.
If a current range is connected, its internal resistance may cause a smaller current value than
the actual one to be displayed.
Turn the safety cover counterclockwise and use the µA & mA measurement connector (with a
0.5 A/250 V fuse).
(1) Set the function switch to 400-4000 µA or 40-400 mA.
(2) Press the Select switch to display on the left part of the readout.
(3) Connect the test pins to the object under measurement and then read the value displayed.
2 Resistor
100Ω
Battery
COM µA & mA
3
Transformer
2 Load
COM µA & mA