Professional Documents
Culture Documents
pc20tk 1 44 31
pc20tk 1 44 31
pc20tk 1 44 31
14
Warning label
Fig. 4-16 Through-
(remove backing
screw-hole
paper)
14 Attach the warning label after removing its
backing sheet. 15
16 Dial A Round rubber foot
15 Remove the round rubber foots from the (semitranslucent,
purple-colored)
mounting paper board and firmly set them (2
Rectangular
places). rubber foot
16 As shown in Fig. 4-18, open the stand (the Rear case
2. Assembling the panel with the rear case and subsequent work: (1) through (3)
(1) Turn OFF the Function switch.
(2) Completely assemble the panel with the rear case by engaging the concavity (slot) with the
convexity at their respective leading ends at an angle of about 20 degrees (left side in Fig. 4-18).
(3) Open the stand and secure the rear case to the panel by using a screw of M3 x 22 (right side
in Fig. 4-18).
29