Professional Documents
Culture Documents
Cotelec Ks 112 e
Cotelec Ks 112 e
≥ 2,54 mm
Receptacles for GKS-112/412/422/912/HSS-118 ≥ 100 Mil
Receptacles of the Series KS-112 are available with different Collar Heights. Variable
Installation Heights are possible. *The number of variations can be increased when
using Spacers. However, it is then possible that the holding force of the Test Probe in the
Receptacle could be reduced. In such cases, Test Probes with bent ends (End Designation
„B“ = Banana) should be used. The Receptacles KS-112 47 (with wire-wrap-Post) are
sufficiently vacuum-sealed for usage in vacuum fixtures. E5 0,2 (.008)
E2
Receptacles with Solder Terminal
Collar Height
Order No.: Receptacle Type in mm
(inches)
ø2,2
(.087)
ø2
(.079)
Example for usage of KS-112 with different
KS–112 23 0,2 (.008) Collar Heights
26 (1.024)
ø2,2 ø2
(.087) (.079)
KS–112 30 0,2 (.008)
30 (1.181)
ø2,2 ø2
variable
(.087) (.079) GKS
KS–112 30 E2 2 (.079)
2(.079) KS
30(1.181)
ø2,2 ø2
(.087) (.079)
KS–112 30 E5 5 (.179)
5 (.197)
30 (1.181)
Install. Height
28 (1.102)
11
(.422)
variable
Receptacles with Press-ring GKS
ø2,08 ø2 GKS
(.082) (.079) DS
KS–112 30 G8 1 ... 8
8 (.315) (.039... .315)
30(1.181)
ø2,08 ø2
(.082) (.079)
KS–112 47 G8 8,2 (.323)
8
8 (.315)
39 (1.535) (.039... .315) * Example of usage of a Receptacle with and
without Spacer (restrictions see above)
Vacuum-sealed Receptacles with Wire-Wrap-Posts
ø2,2 ø2
KS–112 47
(.087) (.079) 0,2
(.008) Mounting Hole Size
8,2 (.323)
36,2 (1.425)
for KS with Collar:
ø2,2 ø2 0,64 CEM 1: ∅ 1,98 - 2,00 mm (.0780 - .0787)
KS–112 47 15
(.087) (.079) (.025) 0,2 FR 4: ∅ 1,99 - 2,01 mm (.0783 - .0791)
(.008)
15,2(.598) Material
43,2 (1.701)
for KS with Collar:
ø2,2 ø2
(.087) (.079) Brass or Nickel-silver, gold-plated
KS–112 47 E2/E5 2/5
(.079 / .197) 2/5 8,2 (.323)
38/41 (1.496 / 1.614) (.079 / .197) Mounting Hole Size
for KS with Press-ring
* Spacers to vary the installation Height (Press-ring pressed in die Mounting Hole)
ø2,2 CEM 1 and FR 4: ∅ 2,03 - 2,05 mm
ø1,7 ø2,2 ø2,2
(.067) (.087) (.087) (.087)
(.0799 - .0807)
Material
1 (.039) 1 2 (.079) 3 (.118) 5 (.197) for KS with Press-ring:
DS-112-01
Bronze, gold-plated
DS-112 01 DS–112 02 DS–112 03 DS–112 05
Receptacles: K S – 1 1 2 3 0 K S – 1 1 2 4 7 Tools:
Insertion and Extraction Tools for GKS
Spacers: D S – 1 1 2 0 2 D S – 1 1 2 0 5
and KS see Page 118.
Insertion Tools for all Receptacles: S W K S - 1 1 2