Professional Documents
Culture Documents
Phy 01
Phy 01
Phy 01
General Instructions:
(iv) Direct answers to the numerical problems without detailed solutions will not carry any marks.
PART A
Pickout the correct option among the four given options for ALL the following questions.
15x 1 15
. Torque acting on electric dipole of dipole moment p placed in uniform electric field E is
(a) N2 b) CO () HO (d) O
The colour sequence in a carbon resistor is red, brown, orange and silver. The value of resistance of
4.
the resistor is
to the magnetic field line at any point gives the direction of the magnetic field
(b) the tangent drawn
at that point
flux
(c) change in magnetic flux (d) constant magnetic
(b) interference
(a) polarization
(c) diffraction (d) refraction
(c) electron-volt
(d) joule
Y 1?
of inputs A and B gives a high output
=
(b) A =
1;B = 0
(a) A = 0;B= 0
(d) A=0;B =1
(c) A=1;B=l|
PART C
IV. Answer any FIVE of the
following questions: x3 15
30. Mention three basic properties of charge.
31. Derive an expression for current in terms of drift velocity of the free electrons.
32. With a circuit diagram explain how a galvanometer is converted into an ammeter.
33. Define the terms (a) declination (b) dip (c) horizontal component of earth's magnetic field.
2U.
92
38. Explain the working of p-n junction in the forward bais. Draw the typical characteristic curve.
PART D
39. Derive an expression for electric field at a point on the equatorial line of the dipole.
41. Derive an expression for magnetic field at any point on the axis of a circular current loop by applying
Biot-Savart's law.
(ii) Write the circuit diagram and input and out put waveforms for a full wave rectifier.
PART E
46. Two resistors of resistance 82 and 162 are connected in parallel with a 12 V. 1Q cell.
47. Calculate resonate frequency and Q-factor of a series LCR circuit containing a pure inductor of
inductance 3H. Capacitor of capacitance 27 uF and resistance 7.4 2.
48. In young's double slit experiment, fringes produced on the screen kept at a certain
of certain width are
width increased
distance from the slits. When the screen is moved away from the slits by 0.1 m fringe
m. The separation between the slits is 1.5 mm. Calculate the wavelength of the light
used.
by 6x10
&** * *