The document provides instructions for selecting and altering parameters of the Movidrive B drive using the SEW keypad. It describes using the arrow up/down keys to select each digit of the parameter number, pressing OK to enter parameter input mode, using 0-9 keys to alter values or arrow keys to select settings, and pressing OK to store changes before returning to the basic display view.
The document provides instructions for selecting and altering parameters of the Movidrive B drive using the SEW keypad. It describes using the arrow up/down keys to select each digit of the parameter number, pressing OK to enter parameter input mode, using 0-9 keys to alter values or arrow keys to select settings, and pressing OK to store changes before returning to the basic display view.
The document provides instructions for selecting and altering parameters of the Movidrive B drive using the SEW keypad. It describes using the arrow up/down keys to select each digit of the parameter number, pressing OK to enter parameter input mode, using 0-9 keys to alter values or arrow keys to select settings, and pressing OK to store changes before returning to the basic display view.
The document provides instructions for selecting and altering parameters of the Movidrive B drive using the SEW keypad. It describes using the arrow up/down keys to select each digit of the parameter number, pressing OK to enter parameter input mode, using 0-9 keys to alter values or arrow keys to select settings, and pressing OK to store changes before returning to the basic display view.
Selecting / Altering a Parameter of the Movidrive B
using the SEW Keypad
ATTENTION
not all of the parameters can be altered
if the drive is in operation basic functions of the SEW keypad Movidrive B select the first digit of the parameter number by using the keys arrow up/down press key OK/arrow right to go to the second digit select the second digit of the parameter number by using the keys arrow up/down press key OK/arrow right to go to the third digit select the third digit of the parameter number by using the keys arrow up/down when the required parameter is selected press key OK to enter the parameter input use keys 0 ... 9 including the decimal point to alter the parameter or ... ... use keys arrow up/down to choose a setting from a selection menu after altering press key OK to store the new figure press key Context Menu select BASIC VIEW by using keys arrow up/down press key OK to go back to the basic display DONE