Professional Documents
Culture Documents
Champion 2022 Air Treatment and After Market Price Book
Champion 2022 Air Treatment and After Market Price Book
Champion 2022 Air Treatment and After Market Price Book
Treatment & Aftermarket
2022 Price List
CA19‐1‐105 ISSUE 34
EFFECTIVE: May 1st, 2022
SUPERSEDES ALL PREVIOUS PRICING
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Table of Contents
CONTENTS PAGE
WARRANTY ………………………………………………………….………………………… 2
TROUBLESHOOTING / WARRANTY CLAIM ………………….……………….………… 3
DISCOUNT SCHEDULE ……………………… ………………………………………………… 3
MINIMUM ORDER VALUE …………………………………………………………………… 3
PRICE PAGES:
QUICK LOCK TUBING………………………………………………………….……… 4
BIG LOCK TUBING…………………………………………………..………………… 12
CHX FLOW CONTROLLER…………………………………………………..………… 17
DRI PRODUCTS…………………………………………………………….…………… 18
REFRIGERATED DRYERS:
XCNC Series (7 – 1200 scfm) Non-Cycling …………………………………..…… 20
CGD Series (10 – 1200 scfm) Non-Cycling ……………………………………… 24
CRN Series Maint Kits ………………………………………………………….… 28
XCCY Series (10 - 1200 scfm) Cycling …………………..……………..………… 33
CRPC Series (75 - 2000 scfm) Energy Savings …………………..……………..… 38
CRE Series Maintenance Kits ……………………………………………………… 43
CRH Series (20 – 125 scfm) High Inlet Temperature …………………………… 44
DESICCANT DRYERS:
XCHL Series (90 – 3300 scfm) Heatless …………………………………………… 46
CDT Series (40 – 5400 scfm) Heatless …………………………………………… 49
XCHP Series (150-3000 scfm) Heated Purge Desiccant ………………………… 53
XCHB Series (150-3000 scfm) Heated Blower Desiccant ………………………… 57
XCML Series (3-177 scfm) Modular Desiccant …………………………………… 61
CDS Series (5-30 scfm) Single Tower ……………………………………………… 63
CDHM Series (3-50 scfm) Small Dual Tower …………………………………… 64
Replacement Desiccant ………………………………………………………….… 66
MEMBRANE DRYERS:
CMD Series - Modular ………………………………………………………….… 68
FILTERS/SEPARATORS:
XC Series (18-3600 scfm) ………………………………………………………… 71
CFF Series Replacement Filter Elements ………………………………………… 78
CFL Series (20-21,250 scfm) Filters ……………………………………………… 79
CFE Series (125 – 3,000 scfm) Mist Eliminator ………………………………… 104
CFG Series (20 – 350 scfm) Spin-On ……………………………………………… 105
CFH Series (30 – 650 scfm) High Efficiency ……………………………………… 106
CWSA (25 - 120 scfm) Liquid Separators ………………………………………… 106
FRLs: FILTERS - REGULATORS - LUBRICATORS………………………………… 107
DRAIN VALVES
CDV1 Mechanical Demand Drain ………………………………………………… 111
Champion Electric Timed Drain …………………………………………………… 111
CDV4 Motorized Ball Valves ……………………………………………………… 111
OIL / WATER SEPARATORS:
CSP EnviroChamp 2 ………………………………………………………….…… 112
CH7 ………………………………………………………….…………………… 113
CHWS ………………………………………………………….…………………… 114
Intelli PAK ………………………………………………………….……………… 115
NITROGEN GENERATORS:
Nitrogen Advantage ………………………………………………………….…… 116
LUBRICANTS:
Rotary Screw Lubricants …………………………………………………………. 117
Reciprocating Lubricants ………………………………………………………… 118
Rotary Vane Lubricants …………………………………………..……………… 119
L & LRS Series Lubricants ………………………………………..……………… 119
REMANUFACTURED PRODUCTS
Reciprocating Remanufactured Products ………………………………………… 120
1
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
WARRANTY
Each Champion compressed air treatment product is warranted to be free from defects in materials and workmanship under
proper use, installation, application, and maintenance in accordance with the manufacturer’s written recommendations and
specifications for a specific time period outlined below. The manufacturer’s warranty is limited to, and the sole remedy for
any such defect shall be, the repair or replacement (at manufacturer’s option) of unaltered products returned to the
manufacturer and proven to have such defect, provided the defect is reported within the time guidelines listed below. Any
replacement parts or dryers will extend to the remaining period of the original warranty and not beyond.
Note: All dryers outside the United States, Canada, and Mexico will carry a parts only warranty.
2
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Troubleshooting should be performed to determine possible solutions to resolve the issue with the product.
Troubleshooting must take place prior to any form of warranty will be considered.
Note: Routine maintenance and minor adjustments to Champion air treatment products are not covered
under this warranty. Prior to performing any possible warranty service or replacing a possible warranted part,
make the appropriate contact as listed below. Failure to comply with this procedure will result in denial of
warranty claim.
DISCOUNT SCHEDULE
Remanufactured products receive a 25% discount off list. FOB Shipping Point – freight not allowed.
All other products listed receive a 40% discount off list. FOB Shipping Point – freight not allowed.
3
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Quick Lock Tubing
Image Description Part Number List Price
Compressed Air piping - Blue
14mm - .5" Tubing (10pack-8ft length) 80ft C9000-14-BLUE-PK10 $156.20
14mm - .5" Tubing (20pack-8ft length) 160ft C9000-14-BLUE-PK20 $312.41
20mm - .75" Tubing Blue 16' Length C9000-20-AIR-BLUE $51.03
25mm - 1" Tubing Blue 16' Length C9000-25-AIR-BLUE $61.69
32mm - 1.25" Tubing Blue 16' Length C9000-32-AIR-BLUE $80.82
40mm - 1.5" Tubing Blue 16' Length C9000-40-AIR-BLUE $102.10
50mm - 2" Tubing Blue 16' Length C9000-50-AIR-BLUE $153.12
63mm - 2.5" Tubing Blue 16' Length C9000-63-AIR-BLUE $185.02
Compressed Air piping - Blue
25mm - 1" Tubing Blue 16' Length w/ Custom Ink C9000-25-AR-B-INK $72.87
32mm - 1.25" Tubing Blue 16' Length w/ Custom Ink C9000-32-AR-B-INK $94.73
40mm - 1.5" Tubing Blue 16' Length w/ Custom Ink C9000-40-AR-B-INK $120.24
50mm - 2" Tubing Blue 16' Length w/ Custom Ink C9000-50-AR-B-INK $179.75
63mm - 2.5" Tubing Blue 16' Length w/ Custom Ink C9000-63-AR-B-INK $217.40
Vacuum Piping - Grey
14mm - .5" Tubing (10pack-8ft length) 80ft C9000-14-GREY-PK10 $156.20
14mm - .5" Tubing (20pack-8ft length) 160ft C9000-14-GREY-PK20 $312.41
20mm - .75" Tubing Grey 16' Length C9000-20-VAC-GREY $51.03
25mm - 1" Tubing Grey 16' Length C9000-25-VAC-GREY $61.69
32mm - 1.25" Tubing Grey 16' Length C9000-32-VAC-GREY $80.82
40mm - 1.50" Tubing Grey 16' Length C9000-40-VAC-GREY $102.10
50mm - 2" Tubing Grey 16' Length C9000-50-VAC-GREY $153.12
63mm - 2.5" Tubing Grey 16' Length C9000-63-VAC-GREY $185.02
Inert Gases Piping - Black
14mm - .5" Tubing (10pack-8ft length) 80ft C9000-14-BLACK-PK1 $156.20
14mm - .5" Tubing (20pack-8ft length) 160ft C9000-14-BLACK-PK2 $312.41
20mm - .75" Tubing Black 16' Length C9000-20-GAS-BLACK $51.03
25mm - 1" Tubing Black 16' Length C9000-25-GAS-BLACK $61.69
32mm - 1.25" Tubing Black 16' Length C9000-32-GAS-BLACK $80.82
40mm - 1.50" Tubing Black 16' Length C9000-40-GAS-BLACK $102.10
50mm - 2" Tubing Black 16' Length C9000-50-GAS-BLACK $153.12
63mm - 2.5" Tubing Black 16' Length C9000-63-GAS-BLACK $185.02
Nitrogen Piping - Green
14mm - .5" Tubing (10pack - 8ft length) 80ft C9000-14-GRN-PK10 $156.20
14mm - .5" Tubing (20pack - 8ft length) 80ft C9000-14-GRN-PK20 $312.41
20mm - .75" Tubing Green 16' Length C9000-20-NIT-GRN $51.03
25mm - 1" Tubing Green 16' Length C9000-25-NIT-GRN $61.69
32mm - 1.25" Tubing Green 16' Length C9000-32-NIT-GRN $80.82
40mm - 1.50" Tubing Green 16' Length C9000-40-NIT-GRN $102.10
50mm - 2" Tubing Green 16' Length C9000-50-NIT-GRN $153.12
63mm - 2.5" Tubing Green 16' Length C9000-63-NIT-GRN $185.02
4
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Quick Lock Tubing
Image Description Part Number List Price
Male Threaded Connectors
Straight male Connector 14mm x 3/8" NPT C90011-14-06 $9.35
Straight male Connector 14mm x 1/2" NPT C90011-14-08 $10.12
Straight male Connector 20mm x 1/2" NPT C90011-20-08 $16.43
Straight male Connector 25mm x 3/4" NPT C90011-25-12 $30.10
Straight male Connector 32mm x 1" NPT C90011-32-16 $35.41
Straight male Connector 40mm x 1-1/2" NPT C90011-40-24 $51.58
Straight male Connector 50mm x 1-1/2" NPT C90011-50-24 $95.88
Straight male Connector 63mm x 2" NPT C90011-63-32 $103.09
Straight Unions
Straight Union Connector 14mm C90040-14 $16.67
Straight Union Connector 20mm C90040-20 $27.55
Straight Union Connector 25mm C90040-25 $36.34
Straight Union Connector 32mm C90040-32 $51.08
Straight Union Connector 40mm C90040-40 $72.64
Straight Union Connector 50mm C90040-50 $110.97
Straight Union Connector 63mm C90040-63 $131.74
Tee Swivel
Swivel Tee 14mm 3/8" NPT male C90230-14-06 $23.94
Swivel Tee 14mm 1/2" NPT male C90230-14-08 $25.82
5
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Quick Lock Tubing
Image Description Part Number List Price
Equal Tee
Union Tee 14mm C90230-14 $24.21
Junction Tee 20mm C90230-20 $40.43
Junction Tee 25mm C90230-25 $55.68
Junction Tee 32mm C90230-32 $80.33
Junction Tee 40mm C90230-40 $109.58
Junction Tee 50mm C90230-50 $144.29
Junction Tee 63mm C90230-63 $189.88
6
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Quick Lock Tubing
Image Description Part Number List Price
Compact Saddle Clamp
Compact Saddle 25mm x 1/2" C90248-25-08 $45.37
Compact Saddle 32mm x 1/2" C90248-32-08 $47.79
Compact Saddle 40mm x 1/2" C90248-40-08 $48.08
Compact Saddle 50mm x 1/2" C90248-50-08 $64.35
Compact Saddle 63mm x 1/2" C90248-63-08 $69.64
Drain Assembly
Drain Coupling 25mm C90260-25 $27.91
Drain Coupling 32mm C90260-32 $36.14
Drain Coupling 40mm C90260-40 $47.54
Drain Coupling 50mm C90260-50 $79.36
Drain Coupling 63mm C90260-63 $109.48
45° Double Outlet Elbow Tube x NPT w/ Valve & Mtg Bracket
45° Double Outlet Elbow w/ Ball Valve 20mm x 1/2" x 1/2" C90665-20-08 $113.63
45° Double Outlet Elbow w/ Ball Valve 25mm x 1/2" x 1/2" C90665-25-08 $148.56
7
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Quick Lock Tubing
Image Description Part Number List Price
Plug - Cap End Fitting
Plug Plastic 14mm C90610-14 $5.47
Plug Cap 20mm C90610-20 $6.32
Plug Cap 25mm C90610-25 $8.46
Plug Cap 32mm C90610-32 $13.01
Plug Cap40mm C90610-40 $18.27
Plug Cap 50mm C90610-50 $33.85
Plug Cap 63mm C90610-63 $51.73
Stem Adapters
Stem Adapter, 20mm X 1/2" NPT Female C90626-20-08 $19.13
Stem Adapter, 20mm X 1/2" NPT Male C90626-20-08M $29.44
Stem Adapter, 20mm X 3/4" NPT Male C90626-20-12M $35.92
Stem Adapter, 25mm X 1/2" NPT Male C90626-25-08M $41.33
Stem Adapter, 25mm X 3/4" NPT Male C90626-25-12M $38.92
Stem Adapter, 25mm X 1" NPT Male C90626-25-16M $44.14
Stem Adapter, 32mm X 1" NPT Male C90626-32-16M $52.85
Stem Adapter, 32mm X 1 1/2" NPT Male C90626-32-24M $72.95
Stem Adapter, 40mm X 1 1/2" NPT Male C90626-40-24M $75.66
Stem Adapter, 50mm X 1 1/2" NPT Male C90626-50-24M $111.42
Stem Adapter, 50mm X 2" NPT Male C90626-50-32M $131.83
Stem Adapter, 63mm X 2" NPT Male C90626-63-32M $155.09
Stem Adapter, 63mm X 2 1/2" NPT Male C90626-63-40M $164.91
Outlet Manifold
Outlet Manifold 1/2" inlet (4 x 1/2"NPT Female outlets) C90601-MFD $66.47
Outlet Manifold 1/2" inlet (2 x 1/2"NPT Female outlets) C90601-2-MFD $49.44
Outlet Manifold 3/4" inlet (4 x 1/2"NPT Female outlets) C90602-MFD $66.47
Outlet Manifold 3/4" inlet (2 x 1/2"NPT Female outlets) C90602-2-MFD $49.44
Manifold Plug 1/2" NPT w/Seal C90610-08-NPT $5.19
Manifold Gauge Kit, 300psi liquid filled C90601-G $55.39
8
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Quick Lock Tubing
Image Description Part Number List Price
Bracket, Strut
Bracket, Hanging/Wall/Strut 14mm / Pack 10 C90810-14-PK10 $27.54
Bracket, strut 20mm /Pack 10 C90810-20-PK10 $27.69
Bracket, strut 25mm /Pack 10 C90810-25-PK10 $33.25
Bracket, strut 32mm /Pack 10 C90810-32-PK10 $35.28
Bracket, strut 40mm /Pack 10 C90810-40-PK10 $39.56
Bracket, strut 50mm /Pack 10 C90810-50-PK10 $41.94
Bracket, strut 63mm /Pack 10 C90810-63-PK10 $44.14
Bracket, Wall
Bracket, Wall (with spacer)
Bracket, Wall 20mm /each C90815-20-WSP $3.68
Bracket, Wall 25mm /each C90815-25-WSP $4.36
Bracket, Wall 32mm /each C90815-32-WSP $5.20
Bracket, Wall 40mm /each C90815-40-WSP $5.95
Bracket, Wall 50mm /each C90815-50-WSP $6.29
Bracket, Wall 63mm /each C90815-63-WSP $6.86
Cantilever Bracket
Cantilever Wall Bracket C90830 $26.85
Beam Clamp
Beam Clamp 3/8" Thread C90860 $3.15
(used with wire hanger or threaded rod)
9
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Quick Lock Tubing
Image Description Part Number List Price
Two-way Outlet Y Adaptor
Ball Valves-NPT
Ball valve, 3/8"M x 3/8"F NPT C86310-06-06 $16.63
Ball valve, 1/2"F x 1/2"F NPT C86300-08-08 $18.28
Ball valve, 1/2"M x 1/2" F NPT C86310-08-08 $18.28
Pressure Gauge
Pressure Gauge 1/4" MNPT C90600-PG-04 $36.18
Pressure Gauge 1/2" MNPT C90600-PG-08 $37.68
Quick Couplers
Universal Socket, 1/4" NPT Male C80191-04 $18.95
Universal Socket, 3/8" NPT Male C80191-06 $18.95
Universal Socket, 1/2" NPT Male C80191-08 $19.59
Universal Socket, 1/4" NPT Female C80192-04 $18.95
Universal Socket, 3/8" NPT Female C80192-06 $18.95
Universal Socket, 1/2" NPT Female C80192-08 $19.59
Universal Socket, 1/4" Hose Barb C80193-04 $17.21
Universal Socket, 3/8" Hose Barb C80193-06 $18.95
Universal Socket, 1/2" Hose Barb C80193-08 $19.59
10
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Quick Lock Tubing
Image Description Part Number List Price
Quick Couplers continued
Plug, 1/4" NPT Male C80221-04 $3.75
Plug, 3/8" NPT Male C80221-06 $4.31
Plug, 1/2" NPT Male C80221-08 $6.24
Plug, 1/4" NPT Female C80222-04 $3.75
Plug, 3/8" NPT Female C80222-06 $4.31
Plug, 1/2" NPT Female C80222-08 $6.24
Plug, 1/4" Hose Barb C80223-04 $3.75
Plug, 3/8" Hose Barb C80223-06 $4.31
Plug, 1/2" Hose Barb C80223-08 $6.24
Tooling
Samples
Quick-Lock Demo Kit, pipe & fittings w/case 14mm C90952 $155.09
Quick Lock Demo Kit, pipe & fittings w/case 20-63mm C90951 $158.53
Big Lock Tubing
Image Description Part Number List Price
Compressed Air Piping - Blue
70mm - 2.5" Tubing Blue (16ft Lengths) C10000-70-AIR-BLU $204.60
90mm - 3" Tubing Blue (16ft Lengths) C10000-90-AIR-BLU $277.40
115mm - 4" Tubing Blue (16ft Lengths) C10000-115-AIR-BLU $349.00
168mm - 6" Tubing Blue (16ft Lengths) C10000-168-AIR-BLU $733.76
220mm - 8" Tubing Blue (16ft Lengths) C10000-220-AIR-BLU $1,140.55
273mm - 10" Tubing Blue (16ft Lengths) C10000-273-AIR-BLU Consult Factory*
Flange Adapters
Flange, 90mm TUBE to Ansi 3", 150 Flange C100012-48 $295.71
Flange, 115mm TUBE to Ansi 4", 150 Flange C100012-64 $395.59
Flange, 168mm TUBE to Ansi 6", 150 Flange C100012-96 $683.63
Flange, 220mm TUBE to Ansi 8", 150 Flange C100012-128 $786.03
Flange, 273mm TUBE to Ansi 10", 150 Flange C100012-160 Consult Factory*
Adapters
Adapter, 70mm TUBE to 1 1/2" NPT male C100011-70-24 $90.25
Adapter, 70mm TUBE to 2" NPT male C100011-70-32 $90.25
Adapter, 70mm TUBE to 2 1/2" NPT male C100011-70-40 $41.19
Adapter, 70mm TUBE to 2 1/2" NPT female C100011-70-40-F $123.55
12
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Big Lock Tubing
Image Description Part Number List Price
Reducer
Reducer, 90mm TUBE to 70mm TUBE C100014-90-70 $99.99
Reducer, 115mm TUBE to 70mm TUBE C100014-115-70 $122.57
Reducer, 115mm TUBE to 90mm TUBE C100014-115-90 $103.70
Reducer, 168mm TUBE to 90mm TUBE C100014-96-48 $265.01
Reducer, 168mm TUBE to 115mm TUBE C100014-96-64 $240.02
Reducer, 220mm TUBE to 90mm TUBE C100014-220-90 $417.90
Reducer, 220mm TUBE to 115mm TUBE C100014-220-115 $420.46
Reducer, 220mm TUBE to 168mm TUBE C100014-220-168 $534.14
Reducer, 273mm TUBE to 220mm TUBE C100014-273-220 Consult Factory*
Reducer, 273mm TUBE to 163mm TUBE C100014-273-168 Consult Factory*
13
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Big Lock Tubing
Image Description Part Number List Price
90° Union Elbows W/couplings
Union Elbow 70mm Aluminum C100130-70 $183.75
Union Elbow 90mm Aluminum C100130-90 $291.89
Union Elbow 115mm Aluminum C100130-115 $393.65
Union Elbow 168mm Aluminum C100130-168 $884.75
Union Elbow 220mm Aluminum C100130-220 $1,728.00
Union Elbow 273mm Aluminum C100130-273 Consult Factory*
14
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Big Lock Tubing
Image Description Part Number List Price
Reducer kit, 115mm TUBE to 6" ANSI 150 Flange C100235-115-96 $785.41
Reducer kit, 115mm TUBE to 3" ANSI 150 Flange C100235-115-48 $503.15
Reducer kit, 115mm TUBE to 2 1/2" ANSI 150 Flange C100235-115-40 $478.16
Reducer kit, 115mm TUBE to 2" ANSI 150 Flange C100235-115-32 $483.91
Hanging - Bracket
Bracket Hanger (3/8" female insert) 70-mm-Steel C100820-70 $4.37
Bracket Hanger (3/8" female insert) 90-mm-Steel C100820-90 $4.66
Bracket Hanger (3/8" female insert) 115mm-Steel C100820-115 $4.80
Bracket Hanger (1/2" female insert w/ 3/8" adapter) 168mm-Steel C100820-168 $9.18
Bracket Hanger (1/2" female insert w/ 3/8" adapter) 220mm-Steel C100820-220 $13.03
Bracket Hanger (1/2" female insert) 273mm-Steel C100820-273 Consult Factory*
Lubricant
Assembly Lube, 1 Quart container C100910-32 $107.54
15
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Big Lock Tubing
Image Description Part Number List Price
Replacement Seals
Replacement Seal, 70mm Standard C100921-70-T $55.69
Replacement Seal, 90mm Standard C100921-90-T $55.69
Replacement Seal, 115mm Standard C100921-115-T $74.85
Replacement Seal, 168mm Standard C100921-168-T $104.60
Replacement Seal, 220mm Standard C100921-220-T $180.97
Replacement Seal, 273mm Standard C100921-273-T Consult Factory*
Tools
Manual Grooving Tool - common for all three sizes C100950-M $4,984.94
Manual Grooving Tool Rental Deposit ** RENC100950-M $3,650.00
VE270 grooving tool roll set for 8" aluminum C100970-RS $3,947.51
VE272 grooving tool roll set for 8" aluminum C100972-RS $3,947.51
Groove Gage C100952-G $172.69
ALL BIG‐LOCK PRODUCTS AND ACCESSORIES ARE "NO CANCELS / NO RETURNS"
16
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CHX Flow Controller
Image Description Part Number List Price
CHX Flow control 75 scfm (right to left) CHX75-RL $539.11
CHX Flow control 75 scfm (left to right) CHX75-LR $539.11
CHX Flow control 200 scfm (right to left) CHX200-RL $740.97
CHX Flow control 200 scfm (left to right) CHX200-LR $740.97
CHX Flow control 1000 scfm (right to left) CHX1000-RL $1,633.46
CHX Flow control 1000 scfm (left to right) CHX1000-LR $1,633.46
Stop Wasting Air
What is the CHX System Flow Controller?
The CHX Series is a balanced flow controller that provides
an economical and reliable single point of control when
it comes to controlling the air pressure delivered to your
operation. Opposed to a simple regulator that cannot deliver
air volume above its set point, the CHX Series is designed to
recognize and react to an increase in flow demand.
Why use a CHX System Flow Controller?
Regardless of the care that is taken when an air system is
designed and installed, it is still going to have leaks and
waste. When the working pressure delivered to the system
is reduced, the volume of air lost to those leaks and waste
is dramatically reduced. The reduction of lost air results in
less run time for an air compressor, which increases the life
of your compressor. The lower power consumption and
decreased maintenance costs associated with less air
compressor run time are direct improvements to the bottom line.
CHX Savings Example:
The 10/7 Equation
Reducing plant pressure by 10 psi results in
a 7% energy consumption reduction. Installing
a CHX controller, along with adequate
compressed air storage, allows compressed
air to be stored at a higher pressure while
delivering consistent, low pressure air to your
operation.
A 15 HP compressor running 3,000 hours per year
at $0.10 per kW = $3,300 annual power consumption.
ALL CHX FLOW CONTROLLERS ARE "NO CANCEL / NO RETURN"
17
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
DRI Products
Image Description Part Number List Price
Complete Point of Use Solution
Separator-Water (Exhaust VLV & 4 Point) 1/2" Thread 53 cfm CDRI-50 $425.26
Separator-Water (Exhaust VLV & 4 Point) 3/4" Thread 78 cfm CDRI-75 $512.69
Separator-Water (Exhaust VLV & 4 Point) 1" Thread 131 cfm CDRI-100 $690.32
CWRM-75 $428.20
Kit-Manifold (Separator-Water) 3/4" Thread 78 cfm
Water Remover
Water remover 1/2 " Thread 53 cfm CWR-50 $221.72
Water remover 3/4 " Thread 78 cfm CWR-75 $307.86
Water remover 1 " Thread 131 cfm CWR-100 $398.78
Water remover 1 1/2 " Thread 212 cfm CWR-150 $536.90
Water remover 2 " Thread 424 cfm CWR-200 $1,331.89
Accessories
Locking exhausting valve (w/o bracket or muffler) CIV-50 $91.72
Locking exhausting valve (w/o bracket or muffler) CIV-75 $91.72
Locking exhausting valve (w/o bracket or muffler) CIV-100 $157.91
18
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
DRI Products
Image Description Part Number List Price
Bracket for use with CWR-50 CBA-3 $9.95
Bracket for use with CWR-75 CBA-4 $10.76
Bracket for use with CWR-100 CBA-5 $15.55
Bracket for use with CWR-150 CBA-6 $33.11
Bracket for use with CWR-200 CBA-7 $74.58
ALL DRI PRODUCTS AND ACCESSORIES ARE "NO CANCELS / NO RETURNS"
19
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Refrigerated Dryers ‐ Non‐Cycling
XCNC Series (7 ‐ 1200 SCFM)
Model Flow Condenser Type Voltage Options
XCNC7 7 A = Air Cooled 1 = 115/1/60 FP = Loose pre‐filtration (XCGP Grade GP) and after‐
XCNC11 11 2 = 230/1/60 filtration (XCHE Grade HE)
XCNC15 15 4 = 460/3/60 X = CRN
XCNC25 25 5 = 230/3/60 NEMA 4 = Consult Factory
XCNC32 32 6 = 575/3/60 Water‐Cooled = Consult Factory
XCNC42 42
XCNC64 64
XCNC75 75
XCNC100 100
XCNC150 150
XCNC200 200
XCNC300 300
XCNC400 400
XCNC500 500
XCNC600 600
XCNC700 700
XCNC800 800
XCNC1000 1000
XCNC1200 1200
NEMA 1 Standard
Maximum Inlet Air Temperature:
XCNC7‐150: 140°F (60°C)
XCNC200‐1200: 120°F (49°C)
Maximum Operating Pressure: 300 psig (Model XGNC200‐1200)
XCNC7‐100: 203 psig
XCNC150: 174 psig
XCNC200‐1200: 300 psig
Rated Flow Capacity: Conditions for rating dryers are in accordance with ISO 7183
Compressed air at dryer inlet: 100 psig (7 bar) and 100°F (38°C); ambient air temperature: 100°F (38°C)
Pressure drip: +/‐ 0.5 psig (Models XGNC200‐1200)
F.O.B. Shipping Points: West Chester, PA
10 – 800 SCFM refrigerated dryers: UL1995 both for US and Canada.
1000 SCFM and larger dryers: UL508A – Industrial control panel standard
300‐800 SCFM: CRN Compliant; Choose X Option in part number
1000‐1200: Consult Factory for Lead time to obtain CRN Certification
20
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XCNC Series (7‐1200 SCFM) Pricing: Base Dryer with Filtration Packages (FP Option)
Dimensions (in) In/Out
Model Flow (scfm) List Price Voltage Weight (lbs)
H W D Connections NPT
XCNC7A1‐FP 7 $ 1,608 115/1/60 16.00 12.00 16.00 3/8" FNPT 40
XCNC11A1‐FP 11 $ 1,661 115/1/60 16.00 12.00 16.00 3/8" FNPT 40
XCNC15A1‐FP 15 $ 2,130 115/1/60 18.00 16.00 18.00 1/2" FNPT 40
XCNC25A1‐FP 25 $ 2,515 115/1/60 18.00 16.00 18.00 1/2" FNPT 60
XCNC32A1‐FP 32 $ 3,000 115/1/60 18.00 16.00 18.00 1/2" FNPT 62
XCNC42A1‐FP 42 $ 3,473 115/1/60 18.00 16.00 18.00 1/2" FNPT 62
XCNC64A1‐FP 64 $ 3,908 115/1/60 22.50 16.50 21.50 3/4" FNPT 77
XCNC75A100‐FP 75 $ 4,435 115/1/60 24.25 15.19 19.68 3/4" FNPT 94
XCNC75A200‐FP 75 $ 4,435 230/1/60 24.25 15.19 19.68 3/4" FNPT 94
XCNC100A100‐FP 100 $ 5,292 115/1/60 24.25 15.19 19.68 3/4" FNPT 99
XCNC100A200‐FP 100 $ 5,292 230/1/60 24.25 15.19 19.68 3/4" FNPT 99
XCNC150A100‐FP 150 $ 6,812 115/1/60 37.50 19.66 30.25 1‐1/2" FNPT 154
XCNC150A200‐FP 150 $ 6,812 230/1/60 37.50 19.66 30.25 1‐1/2" FNPT 154
XCNC200A100‐FP 200 $ 9,478 115/1/60 37.50 19.66 30.25 1‐1/2" FNPT 170
XCNC200A200‐FP 200 $ 9,478 230/1/60 37.50 19.66 30.25 1‐1/2" FNPT 170
XCNC250A400‐FP 250 $ 9,986 460/3/60 43.00 28.09 32.62 1‐1/2" FNPT 340
XCNC250A500‐FP 250 $ 9,986 230/3/60 43.00 28.09 32.62 1‐1/2" FNPT 340
XCNC300A400‐FP 300 $ 11,773 460/3/60 43.00 28.09 32.62 2" MNPT 375
XCNC300A500‐FP 300 $ 11,773 230/3/60 43.00 28.09 32.62 2" MNPT 375
XCNC300A600X‐FP 300 $ 11,773 575/3/60 43.00 28.09 32.62 2" MNPT 375
XCNC400A400‐FP 400 $ 14,250 460/3/60 43.00 28.09 32.62 2" MNPT 375
XCNC400A500‐FP 400 $ 14,250 230/3/60 43.00 28.09 32.62 2" MNPT 375
XCNC400A600X‐FP 400 $ 14,250 575/3/60 43.00 28.90 32.62 2" MNPT 375
XCNC500A400‐FP 500 $ 16,440 460/3/60 61.50 42.62 40.25 3" MNPT 950
XCNC500A600X‐FP 500 $ 16,440 575/3/60 61.50 42.62 40.25 3" MNPT 950
XCNC600A400‐FP 600 $ 19,740 460/3/60 61.50 42.62 40.25 3" MNPT 950
XCNC600A600X‐FP 600 $ 19,740 575/3/60 61.50 42.62 40.25 3" MNPT 950
XCNC700A400‐FP 700 $ 20,944 460/3/60 61.50 42.62 40.25 3" MNPT 1050
XCNC700A600X‐FP 700 $ 20,944 575/3/60 61.50 42.62 40.25 3" MNPT 1050
XCNC800A400‐FP 800 $ 24,375 460/3/60 61.50 42.62 40.25 3" MNPT 1050
**XCNC800A600‐FP 800 $ 24,375 575/3/60 61.50 42.62 40.25 3" MNPT 1050
XCNC1000A400‐FP 1000 $ 29,052 460/3/60 69.00 32.44 76.25 4" CLS 150 FLN 1700
XCNC1000A600‐FP 1000 $ 29,052 575/3/60 69.00 32.44 76.25 4" CLS 150 FLN 1700
XCNC1200A400‐FP 1200 $ 32,885 460/3/60 69.00 32.44 76.25 4" CLS 150 FLN 1725
**XCNC1200A600‐FP 1200 $ 32,885 575/3/60 69.00 32.44 76.25 4" CLS 150 FLN 1725
**Extra 00 in part number do not correlate to options; just for system placeholder purposes
**X: CRN for 1000‐1200 scfm consult factory; MODEL ABOVE IS NOT CRN
21
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
**Extra 00 in part number do not correlate to options; just for systems placeholder purposes
**X: CRN for 1000‐1200 scfm consult factory; MODEL ABOVE IS NOT CRN
22
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XCNC Series (7‐1200 SCFM) Maintenance Kit Pricing For
Filtration Package Option (FP Option)
Maintenance
Model Voltage Kit List Price
Kit
XCNC7A1‐FP 115/1/60 47716871001 $245
XCNC11A1‐FP 115/1/60 47716871001 $245
XCNC15A1‐FP 115/1/60 47716871001 $245
XCNC25A1‐FP 115/1/60 47715470001 $315
XCNC32A1‐FP 115/1/60 47715470001 $315
XCNC42A1‐FP 115/1/60 47715470001 $315
XCNC64A1‐FP 115/1/60 47715471001 $321
XCNC75A100‐FP 115/1/60 47715472001 $402
XCNC75A200‐FP 230/1/60 47715472001 $402
XCNC100A100‐FP 115/1/60 47715472001 $402
XCNC100A200‐FP 230/1/60 47715472001 $402
XCNC150A100‐FP 115/1/60 47715474001 $604
XCNC150A200‐FP 230/1/60 47715474001 $604
XCNC200A100‐FP 115/1/60 47715474001 $604
XCNC200A200‐FP 230/1/60 47715474001 $604
XCNC250A400‐FP 460/3/60 47715475001 $691
XCNC2500A500‐FP 230/3/60 47715475001 $691
XCNC300A400‐FP 460/3/60 47715475001 $691
XCNC300A500‐FP 230/3/60 47715475001 $691
XCNC300A600X‐FP 575/3/60 47715475001 $691
XCNC400A400‐FP 460/3/60 47715476001 $822
XCNC400A500‐FP 230/3/60 47715476001 $822
XCNC400A600X‐FP 575/3/60 47715476001 $822
XCNC500A400‐FP 460/3/60 47715477001 $946
XCNC500A600‐FP 575/3/60 47715477001 $946
XCNC600A400‐FP 460/3/60 47715477001 $946
XCNC600A600‐FP 575/3/60 47715477001 $946
XCNC700A400‐FP 460/3/60 47715478001 $979
XCNC700A600‐FP 575/3/60 47715478001 $979
XCNC800A400‐FP 460/3/60 47715479001 $1,153
XCNC800A600‐FP 575/3/60 47715479001 $1,153
XCNC1000A400‐FP 460/3/60 47715479001 $1,153
XCNC1000A600‐FP 575/3/60 47715479001 $1,153
XCNC1200A400‐FP 460/3/60 47715480001 $1,267
XCNC1200A600‐FP 575/3/60 47715480001 $1,267
** To qualify for the extended warranty the FP package (above) must be purchased; maintenance kits then yearly after that.
Filter Pack Models
Dryer Models Pre‐Filter Model After‐Filter Model
XCNC7‐15 XCGP24FD XCHE24FD
XCNC25‐42 XCGP44FD XCHE44FD
XCNC64 XCGP65FD XCHE65FD
XCNC75‐100 XCGP112FD XCHE112FD
XCNC125 XCGP135FD XCHE135FD
XCNC150‐200 XCGP235FD XCHE235FD
XCNC300 XCGP353FD XCHE353FD
XCNC400 XCGP471FD XCHE471FD
XCNC500‐600 XCGP589FD XCHE589FD
XCNC700 XCGP706FD XCHE706FD
XCNC800‐1000 XCGP1077FD XCHE1077FD
XCNC1200 XCGP1354FD XCHE1354FD
23
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Refrigerated Dryers ‐ Non‐Cycling
CGD Series (10 ‐ 1200 SCFM)
Model Flow Condenser Type Voltage Options
CGD10 10 A = Air Cooled 1 = 115/1/60 FP: Loose pre‐filtration (CFL Grade C) and after‐filtration (CFL
CGD15 15 W = Water Cooled 4 = 460/3/60 Grade E)
CGD25 25 CGD10‐CGD50 ‐ Static
CGD35 35
CGD50 50
CGD75 75
CGD100 100
CGD125 125
CGD150 150
CGD200 200
CGD250 250
CGD300 300
CGD400 400
CGD500 500
CGD600 600
CGD800 800
CGD1000 1000
CGD1200 1200
Maximum Inlet Air Temperature: 120°F (49°C)
Maximum Operating Pressure: model CGD25 through CGD50 (250 psig); model CGD75 through CGD1200 (232 psig)
Rated Flow Capacity: Conditions for rating dryers are in accordance with ISO 7183
Compressed air at dryer inlet: 100 psig (7 bar) and 100°F (38°C); ambient air temperature: 100°F (38°C)
24
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CGD Series (10-1200 SCFM) Pricing: Base Dryer with Filtration Packages (FP Option)
Dimensions In/Out
Weight
Model Flow (scfm) List Price Voltage Connections
H W D (lbs)
(NPT)
CGD10A1FP 10 $ 1,795 15.00 13.00 13.00 3/8” OD 64
CGD15A1FP 15 $ 2,292 15.00 13.00 13.00 3/8” OD 69
CGD25A1FP 25 $ 2,423 22.00 16.00 15.00 3/4" 88
CGD35A1FP 35 $ 2,882 22.00 16.00 15.00 3/4" 92
CGD50A1FP 50 $ 3,853 115/1/60 22.00 20.00 20.00 3/4" 101
CGD75A1FP 75 $ 4,964 23.67 14.28 32.33 1" 123
CGD100A1FP 100 $ 5,177 23.67 14.28 32.33 1" 129
CGD125A1FP 125 $ 5,838 23.67 14.28 32.33 1" 135
CGD150A1FP 150 $ 6,741 23.67 14.28 34.69 1" 148
CGD200A4FP 200 $ 9,403 460/3/60 29.97 19.40 36.66 1" 165
CGD250A4FP 250 $ 9,985 460/3/60 29.97 19.40 36.66 1" 205
CGD300A4FP 300 $ 11,346 460/3/60 31.94 19.40 43.75 2" 212
CGD400A4FP 400 $ 14,631 31.94 19.40 43.75 2" 232
CGD500A4FP 500 $ 12,798 31.94 21.36 47.69 2" 328
CGD600A4FP 600 $ 15,714 32.00 22.00 50.00 2" NPT 353
CGD600W4FP 600 $ 16,062 32.00 22.00 50.00 2" NPT 353
CGD800A4FP 800 $ 18,040 59.00 30.00 42.00 3" FLG 687
460/3/60
CGD800W4FP 800 $ 19,770 59.00 30.00 42.00 3" FLG 687
CGD1000A4FP 1000 $ 20,839 64.00 29.00 45.00 4" FLG 786
CGD1000W4FP 1000 $ 22,238 64.00 29.00 45.00 4" FLG 786
CGD1200A4FP 1200 $ 21,884 64.00 29.00 45.00 4" FLG 810
CGD1200W4FP 1200 $ 24,681 64.00 29.00 45.00 4" FLG 810
Maximum Inlet Air Temperature: 120°F (49°C)
Maximum Operating Pressure: model CGD25 through CGD50 (250 psig); model CGD75 through CGD1200 (232 psig)
Rated Flow Capacity: Conditions for rating dryers are in accordance with ISO 7183
Compressed air at dryer inlet: 100 psig (7 bar) and 100°F (38°C); ambient air temperature: 100°F (38°C)
25
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Dimensions In/Out
Weight
Model Flow (scfm) List Price Voltage Connections
(lbs)
H W D (NPT)
Maximum Inlet Air Temperature: 120°F (49°C)
Maximum Operating Pressure: model CGD25 through CGD50 (250 psig); model CGD75 through CGD1200 (232 psig)
Rated Flow Capacity: Conditions for rating dryers are in accordance with ISO 7183
Compressed air at dryer inlet: 100 psig (7 bar) and 100°F (38°C); ambient air temperature: 100°F (38°C)
26
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CGD Series (10-1200 SCFM) Maintenance Kit Pricing For Filtration CGD Series (10-1200 SCFM) Maintenance Kit Pricing for Non
Package Option (FP Option) Filtration Package Dryers
Maintenance Kit List
Model Flow (scfm) Voltage Kit List Price Model Flow (scfm) Voltage
Kit Maintenance Kit Price
CGD10A1FP 10 CGDMKF6 $448 CGD10A1 10 CGDMK1 $309
CGD15A1FP 15 CGDMKF6 $448 CGD15A1 15 CGDMK1 $309
CGD25A1FP 25 CGDMKF7 $489 CGD25A1 25 CGDMK2 $234
CGD35A1FP 35 CGDMKF7 $489 CGD35A1 35 CGDMK2 $234
CGD50A1FP 50 115/1/60 CGDMKF8 $553 CGD50A1 50 115/1/60 CGDMK2 $234
CGD75A1FP 75 CGDMKF9 $610 CGD75A1* 75 C3149293 $296
CGD100A1FP 100 CGDMKF9 $610 CGD100A1* 100 C3149293 $296
CGD125A1FP 125 CGDMKF10 $685 CGD125A1* 125 C3149293 $296
CGD150A1FP CGDMKF23 $744 CGD150A1 C7442841 $368
150 150
CGD150A2FP 230/1/60 CGDMKF12 $685 CGD150A2* 230/1/60 C3149293 $296
CGD200A2FP 230/1/60 CGDMKF13 $777 CGD200A2* 230/1/60 C3146977 $252
200 200
CGD200A4FP 460/3/60 CGDMKF24 $770 CGD200A4 460/3/60 C7477982 $314
CGD250A2FP 230/1/60 CGDMKF15 $777 CGD250A2* 230/1/60 C3146977 $252
250 250
CGD250A4FP 460/3/60 CGDMKF24 $770 CGD250A4 460/3/60 C7477982 $314
CGD300A2FP 230/1/60 CGDMKF16 $902 CGD300A2* 230/1/60 C3146977 $252
300 300
CGD300A4FP 460/3/60 CGDMKF25 $898 CGD300A4 460/3/60 C7477982 $314
CGD400A2FP 230/1/60 CGDMKF18 $960 CGD400A2* 230/1/60 C3146977 $252
400 400
CGD400A4FP CGDMKF26 $957 CGD400A4 C7477982 $314
CGD500A4FP 500 CGDMKF20 $1,042 CGD500A4* 500 C3161248 $285
CGD600A4FP 600 CGDMKF20 $1,042 CGD600A4* 600 C3161248 $285
CGD600W4FP 600 CGDMKF20 $1,042 CGD600W4* 600 C3161248 $380
CGD800A4FP 800 CGDMKF21 $1,666 CGD800A4* 800 C3161248 $380
460/3/60 460/3/60
CGD800W4FP 800 CGDMKF21 $1,666 CGD800W4* 800 C3161248 $380
CGD1000A4FP 1000 CGDMKF21 $1,666 CGD1000A4* 1000 C3161248 $380
CGD1000W4FP 1000 CGDMKF21 $1,666 CGD1000W4* 1000 C3161248 $380
CGD1200A4FP 1200 CGDMKF22 $1,757 CGD1200A4* 1200 C3161248 $380
CGD1200W4FP 1200 CGDMKF22 $1,757 CGD1200W4* 1200 C3161248 $380
* Maintenance kits / ambient filters are not available for this model. Please follow routine maintenance as noted in manual. Part number
above is the replacement drain for the dryer.
** To qualify for the extended warranty the FP package (above) must be purchased; maintenance kits then yearly after that.
TABLE 1‐CAPACITY CORRECTION FACTORS
Inlet Air Pressure Inlet Air Temperature
PSIG BARG 90◦F/32◦C 100◦F/38◦C 110◦F/43◦C 90◦F/32◦C
80 5.6 1.19 0.95 0.77 0.63
100 6.9 1.25 1.00 0.82 0.68
125 8.6 1.30 1.05 0.86 0.72
150 10.3 1.34 1.08 0.90 0.75
175 12.1 1.37 1.11 0.92 0.78
200 13.8 1.39 1.14 0.95 0.80
250 17.2 1.43 1.17 0.98 0.83
TABLE 2‐ AMBIENT AIR TEMPERATURE
80◦F 90◦F 100◦F 110◦F
Ambient Air Temperature
27◦C 32◦C 38◦C 43◦C
27
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Refrigerated Dryers ‐ Non‐Cycling
CRN Series Maint Kits
CRN600 600
CRNMK27S* CRNMK47S*
CRNMK9** CRNMK19**
CRN750 750
CRNMK28S* CRNMK48S*
CRNMK10* CRNMK20**
CRN1000 1000
CRNMK10.5** CRNMK49S*
CRNMK10* CRNMK20**
CRN1250 1250
CRNMK10.5** CRNMK49S*
CRNMK10* CRNMK20**
CRN1500 1500
CRNMK10.5** CRNMK49S*
CRNMK11* CRNMK21**
CRN1750 1750
CRNMK11.5** CRNMK50S*
CRNMK11* CRNMK21**
CRN2000 2000
CRNMK11.5** CRNMK50S*
28
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CRN Series (10 ‐ 2000 SCFM) Maintenance Kit Pricing
CRN MAINTENANCE KITS PRICING
Standard List Cold Coalescing List
Maintenance Kits * Price Maintenance Kits Price
CRNMK1 $241.43 CRNMK12 $373.72
CRNMK2 $253.80 CRNMK13 $472.49
CRNMK3 $272.38 CRNMK14 $664.40
CRNMK4 $396.09 CRNMK15 $810.54
CRNMK5 $492.77 CRNMK16 $890.06
CRNMK6 $533.60 CRNMK17 $1,039.93
CRNMK7 $578.79 CRNMK18 $1,160.75
CRNMK8 $617.84 CRNMK19 $1,611.92
CRNMK9 $955.84 CRNMK20 $3,711.68
CRNMK10 $1,964.33 CRNMK21 $6,241.17
CRNMK10.5 $1,468.14 CRNMK42S $840.89
CRNMK11 $3,236.04 CRNMK43S $1,048.50
CRNMK11.5 $2,439.28 CRNMK44S $1,136.29
CRNMK22S $533.60 CRNMK44D2 **** $2,363.49
CRNMK23S * $564.71 CRNMK45S $1,380.97
CRNMK24S * $626.80 CRNMK45D2 **** $1,397.11
CRNMK24D2 *** $1,225.69 CRNMK46S $1,428.39
CRNMK25S * $919.11 CRNMK46D2 **** $2,946.13
CRNMK25D2 *** $1,412.61 CRNMK47S $1,582.86
CRNMK26S * $955.84 CRNMK47D2 **** $3,034.09
CRNMK26D2 *** $1,566.50 CRNMK48S $1,624.14
CRNMK27S * $961.96 CRNMK48D2**** $3,341.85
CRNMK27D2 *** $1,593.98 CRNMK49S $2,456.11
CRNMK28S * $984.89 CRNMK49D2 **** $6,738.72
CRNMK28D2 *** $1,654.46 CRNMK50S $4,066.49
CRNMK29S * $1,542.39 CRNMK50D2**** $9,767.31
CRNMK29D2 *** $3,556.25
CRNMK30S $2,489.78
CRNMK29D21*** $4,842.68
Notes:
CRNMK1 Kit contains: Drain mechanism, O‐ring for bowl, drain tube and service reminder decal
All other standard kit components: Separator element, drain, drain tube, hose fastener, wave spring, head O‐ring,
lube packet and service reminder decal
All cold coalescing kit components: Filter elements, electric drain rebuild kit drain tube, hose fastener, wave
spring, head O‐rings, lube packet and service reminder decal
* Units manufactured after 6/15/06, New Platform
** Units manufactured between 1/15/02 and 6/14/06
*** Kit contains: No Loss Drain Valve Repair Kit, Drain Cover, Separator/Filter Element, Lubricant Packet, O‐Ring,
Service Reminder Decal
**** Kit contains: No Loss Drain Valve Repair Kit, Drain Cover, Separator/Filter Element, High Efficiency Oil Removal
Filter
29
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Refrigerated Dryers ‐ Non‐Cycling
CRN Series (25000 ‐ 3000 SCFM)
Condenser
Flow (1) Type Voltage Controls NEMA Class Options
CRN2500 A = Air 7 = 460/3/60 C4 = Level 4 N1 = NEMA 1 B = Air By-pass piping (consists of three valve
CRN3000 Cooled 8 = 575/3/60 block & bypass; fully assembled, ships loose,
to be mounted to the inlet/outlet connections
W = Water
(200 psig MWP)
Cooled
F = Integrated Cold Coalescing Oil Removal Grade
E Afterfilter (25-3000 models)
30
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CRN Series (2500 ‐ 3000 SCFM) Pricing
List Price Voltage Dimensions In/Out Weight Standard Cold Coalescing
HxWxD Connections (LBS) Maintenance Kits Maintenance Kits
Model Flow (1) Air Water
Cooled Cooled
CRNMK11* CRNMK21**
CRN2500 2500 C/F C/F 85x55x60 6” ANSI 2315
CRNMK11.5** CRNMK50S*
460/3/60
575/3/60 CRNMK11* CRNMK21**
CRN3000 3000 C/F C/F 85x55x60 6” ANSI 2646
CRNMK11.5** CRNMK50S*
CRN Series (2500 ‐ 3000 SCFM) Options
31
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CRN Series (2500 ‐ 3000 SCFM) Maintenance Kit Pricing
CRN MAINTENANCE KITS PRICING
Standard List Cold Coalescing List
Maintenance Kits * Price Maintenance Kits ** Price
CRNMK11* $3,236.04 CRNMK21** $6,241.17
CRNMK11.5** $2,439.28 CRNMK50S* $4,066.49
Notes:
CRNMK1 Kit contains: Drain mechanism, O‐ring for bowl, drain tube and service reminder decal
All other standard kit components: Separator element, drain, drain tube, hose fastener, wave spring, head O‐ring,
lube packet and service reminder decal
All cold coalescing kit components: Filter elements, electric drain rebuild kit drain tube, hose fastener, wave
spring, head O‐rings, lube packet and service reminder decal
* Units manufactured after 6/15/06, New Platform
** Units manufactured between 1/15/02 and 6/14/06
*** Kit contains: No Loss Drain Valve Repair Kit, Drain Cover, Separator/Filter Element, Lubricant Packet, O‐Ring,
Service Reminder Decal
**** Kit contains: No Loss Drain Valve Repair Kit, Drain Cover, Separator/Filter Element, High Efficiency Oil Removal
Filter
32
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Refrigerated Dryers: Thermal Mass Cycling
XCCY Series (10 ‐ 1200 SCFM)
NEMA 1 Standard
Maximum Inlet Air Temperature: 120°F (49°C)
Maximum Operating Pressure: XCCY200‐800 STD Solenoid Drain (300 psig) XCCY200‐800 No Air Loss Drain (220 psig) XCCY1000‐1200 (220
psig)
Rated Flow Capacity: Conditions for rating dryers are in accordance with ISO 7183
Compressed air at dryer inlet: 100 psig (7 bar) and 100°F (38°C); ambient air temperature: 100°F (38°C)
Standard XCCY200‐800 models ETL‐certified, XCCY1000‐1200 UL 508 panels
F.O.B. Shipping Points: West Chester, PA
Non‐standard models: Submit Request for Quote Form to customer service
10 – 800 SCFM refrigerated dryers: UL1995 both for US and Canada.
1000 SCFM and larger dryers: UL508A – Industrial control panel standard
300‐800 SCFM: CRN Compliant; Choose X Option in part number
1000‐1200: Consult Factory for Lead time to obtain CRN Certification
33
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Product Model Dimensions
Flow Dimensions Weight
Model Voltage Inlet Connections
60hz H W D lbs
XCCY10A100 10 26.50 15.20 19.7 85 1/2" FNPT
XCCY18A100 18 26.50 15.20 19.7 85 1/2" FNPT
XCCY24A100 24 26.50 15.20 19.7 90 1/2" FNPT
115/1/60
XCCY35A100 35 26.50 15.20 19.7 95 1/2" FNPT
XCCY50A100 50 26.50 15.20 19.7 105 3/4" FNPT
XCCY75A100 75 30.40 16.60 22.4 150 1" FNPT
XCCY100A100 100 30.40 16.60 22.4 155 1" FNPT
115/1/60
XCCY125A100 125 30.40 16.60 22.4 160 1" FNPT
230/1/60
XCCY150A100 150 37.50 19.66 30.25 263 1‐1/2" FNPT
XCCY200A400 200 57.75 28.09 32.62 620 1‐1/2" MNPT
XCCY300A400 300 57.75 28.09 32.62 735 2" MNPT
XCCY400A400 400 57.75 28.09 32.62 745 2" MNPT
XCCY500A400 500 460/3/60 61.50 42.62 40.25 1105 3" MNPT
XCCY600A400 600 230/3/60 61.50 42.62 40.25 1275 3" MNPT
XCCY700A400 700 575/3/60 61.50 42.62 40.25 1320 3" MNPT
XCCY800A400 800 61.50 42.62 40.25 1415 3" MNPT
XCCY1000A400 1000 69.00 32.44 76.25 2315 4" CLS 150 FLN
XCCY1200A400 1200 69.00 32.44 76.25 2435 4" CLS 150 FLN
34
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XCCY SERIES DRYER PRICING: DRYER & SHIP LOOSE FILTRATION
Part Number Flow List Price Part Number Flow List Price
XCCY10A100‐FP 10 $ 2,779 XCCY500A400‐FP $ 19,145
XCCY18A100‐FP 18 $ 2,982 XCCY500A40N‐FP $ 19,708
XCCY24A100‐FP 24 $ 3,468 XCCY500A4H0‐FP $ 22,526
XCCY35A100‐FP 35 $ 4,182 XCCY500A4HN‐FP 500 $ 23,087
XCCY50A100‐FP 50 $ 4,756 XCCY500A600X‐FP $ 19,145
XCCY75A100‐FP $ 5,466 XCCY500W400‐FP $ 19,927
75
XCCY75A10N‐FP $ 6,059 XCCY500W40N‐FP $ 21,564
XCCY100A100‐FP $ 6,194 XCCY600A400‐FP $ 21,955
XCCY100A10N‐FP $ 6,757 XCCY600A40N‐FP $ 22,517
100
XCCY100A200‐FP $ 6,194 XCCY600A4H0‐FP $ 24,772
XCCY100A20N‐FP $ 6,757 XCCY600A4HN‐FP 600 $ 25,335
XCCY125A100‐FP $ 6,825 XCCY600A600X‐FP $ 21,955
XCCY125A10N‐FP $ 7,388 XCCY600W400‐FP $ 22,736
125
XCCY125A200‐FP $ 6,825 XCCY600W40N‐FP $ 23,298
XCCY125A20N‐FP $ 7,388 XCCY700A400‐FP $ 24,563
XCCY150A100‐FP $ 7,804 XCCY700A40N‐FP $ 25,126
XCCY150A10N‐FP $ 8,367 XCCY700A4H0‐FP $ 27,381
150
XCCY150A200‐FP $ 7,804 XCCY700A4HN‐FP 700 $ 27,944
XCCY150A20N‐FP $ 8,367 XCCY700A600X‐FP $ 24,441
XCCY200A400‐FP $ 10,847 XCCY700W400‐FP $ 25,344
XCCY200A40N‐FP $ 9,575 XCCY700W40N‐FP $ 25,907
200
XCCY200A500‐FP $ 9,103 XCCY800A400‐FP $ 28,163
XCCY200A50N‐FP $ 9,575 XCCY800A40N‐FP $ 28,724
XCCY300A400‐FP $ 13,381 XCCY800A4H0‐FP $ 30,980
XCCY300A40N‐FP $ 13,942 XCCY800A4HN‐FP 800 $ 31,541
XCCY300A4H0‐FP $ 16,760 XCCY800A600X‐FP $ 28,163
XCCY300A4HN‐FP $ 17,321 XCCY800W400‐FP $ 28,944
XCCY300A500‐FP 300 $ 13,381 XCCY800W40N‐FP $ 29,505
XCCY300A50N‐FP $ 13,942 XCCY1000A400‐FP $ 38,123
XCCY300A600X‐FP $ 13,381 XCCY1000A40N‐FP $ 38,686
XCCY300W400‐FP $ 14,163 XCCY1000A4H0‐FP $ 40,941
XCCY300W40N‐FP $ 14,724 XCCY1000A4HN‐FP 100 $ 29,479
XCCY400A400‐FP $ 15,535 **XCCY1000A600‐FP $ 31,998
XCCY400A40N‐FP $ 16,097 XCCY1000W400‐FP $ 38,904
XCCY400A4H0‐FP $ 19,841 XCCY1000W40N‐FP $ 39,953
XCCY400A4HN‐FP $ 19,476 XCCY1200A400‐FP $ 41,921
XCCY400A500‐FP 400 $ 15,535 XCCY1200A40N‐FP $ 42,443
XCCY400A50N‐FP $ 16,097 XCCY1200A4H0‐FP $ 44,212
XCCY400A600X‐FP $ 15,535 XCCY1200A4HN‐FP 1200 $ 45,259
XCCY400W400‐FP $ 16,317 **XCCY1200A600‐FP $ 41,921
XCCY400W40N‐FP $ 16,879 XCCY1200W400‐FP $ 42,176
XCCY1200W40N‐FP $ 43,225
**X: CRN for 1000‐1200 scfm consult factory; MODEL ABOVE IS NOT CRN
35
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XCCY SERIES DRYER PRICING: DRYER ONLY
Part Number Flow List Price Part Number Flow List Price
**X: CRN for 1000‐1200 scfm consult factory; MODEL ABOVE IS NOT CRN
36
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filter Pack (‐FP) Ship Loose Corresponding Filter Model
XCCY Series (10‐1200 SCFM) Maintenance Kit Pricing For Filtration Package Option (FP Option)
Maintenance Kit
List Price
Dryer Model PN
XCCY10‐FP 47715469001 $315
XCCY18‐FP 47715469001 $315
XCCY24‐FP 47715470001 $315
XCCY35‐FP 47715470001 $315
XCCY50‐FP 47715471001 $321
XCCY75‐FP 47715472001 $402
XCCY100‐FP 47715472001 $402
XCCY125‐FP 47715473001 $452
XCCY150‐FP 47715474001 $604
XCCY200‐FP 47715474001 $604
XCCY300‐FP 47715475001 $691
XCCY400‐FP 47715476001 $822
XCCY500‐FP 47715477001 $946
XCCY600‐FP 47715477001 $946
XCCY700‐FP 47715478001 $979
XCCY800‐FP 47715479001 $1,153
XCCY1000‐FP 47715479001 $1,153
XCCY1200‐FP 47715480001 $1,267
37
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Refrigerated Dryers
CRPC Series (75 ‐ 2000 SCFM)
Condenser
Flow (1) Type Voltage* Controls NEMA Class Options*
CRPC75 A = Air Cooled 1 = 115/1/60 C1 = Level 1 N1 = NEMA 1 FP = Loose pre‐filtration (CFL Grade C) and after‐
W=Water Cooled filtration (CFL Grade E)
CRPC100 4 = 460/3/60 C2 = Level 2
CRPC150
CRPC200
CRPC300
CRPC450
CRPC550
CRPC800
CRPC1000
CRPC1250
CRPC1500
CRPC2000
∙ Maximum operating pressure: 232 psig
∙ Maximum inlet operating temperature: 122°F (54 °C)
∙ Controller Level 1 on Models 75‐100
∙ Controller Level 2 on Models 150‐2000
∙ Condensate Drains:
∙ No‐Air‐Loss Drain standard for all models
∙ Rated flow capacity:
Conditions for rating dryers are in accordance with ISO 7183 (Option A2) —100 psig (6.9 bar) inlet air pressure; 100ºF (38ºC) inlet air
temperature ; 100°F (38°C) ambient air temperature, 100% saturated inlet air; operating on 60 Hz power supply. At rated conditions,
outlet pressure dew point ‐ISO 8573.1: 2009 Air quality Class 5; maximum pressure drop £ 5 psi.
**CRPC dryer not currently offered in 50Hz
F.O.B. Shipping Points: Ocala, FL, 34474
38
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CRPC SERIES AIR DRYER WITH FILTRATION PACKAGE: AIR‐COOLED
Dimensions In/Out Weight
Model Flow Voltage HxWxD Connections (LBS)
∙ Maximum operating pressure: 232 psig
∙ Maximum inlet operating temperature: 122°F (54 °C)
∙ Controller Level 1 on Models 75‐100
∙ Controller Level 2 on Models 150‐2000
∙ Condensate Drains:
∙ No‐Air‐Loss Drain standard for all models
∙ Rated flow capacity:
Conditions for rating dryers are in accordance with ISO 7183 (Option A2) —100 psig (6.9 bar) inlet air pressure; 100ºF
(38ºC) inlet air temperature ; 100°F (38°C) ambient air temperature, 100% saturated inlet air; operating on 60 Hz power
supply. At rated conditions, outlet pressure dew point ‐ISO 8573.1: 2009 Air quality Class 5; maximum pressure drop £ 5
psi.
**CRPC dryer not currently offered in 50Hz
39
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CRPC SERIES AIR DRYER WITH FILTRATION PACKAGE
List Price List Price
Part Number Flow Voltage Air Cooled Part Number Water
Cooled
CRPC75A1FP 75 115/1/60 $6,035 CRPC800W4FP C/F
CRPC100A1FP 100 115/1/60 $6,173 CRPC800W5FP C/F
CRPC150A1FP 150 115/1/60 $7,820 CRPC1000W4FP C/F
CRPC200A4FP 200 460/3/60 $10,840 CRPC1000W5FP C/F
CRPC200A5FP 200 575/3/60 $13,123 CRPC1250W4FP C/F
CRPC300A4FP 300 460/3/60 $12,899 CRPC1250W5FP C/F
CRPC300A5FP 300 575/3/60 $14,227 CRPC1500W4FP C/F
CRPC450A4FP 450 460/3/60 $17,155 CRPC1500W5FP C/F
CRPC450A5FP 450 575/3/60 $18,643 CRPC2000W4FP C/F
CRPC550A4FP 550 460/3/60 $19,626 CRPC2000W5FP C/F
CRPC550A5FP 550 575/3/60 $20,973
CRPC800A4FP 800 460/3/60 $32,160
CRPC800A5FP 800 575/3/60 $33,482
CRPC1000A4FP 1000 460/3/60 $36,794
CRPC1000A5FP 1000 575/3/60 $38,633
CRPC1250A4FP 1250 460/3/60 $43,955
CRPC1250A5FP 1250 575/3/60 $47,832
CRPC1500A4FP 1500 460/3/60 $54,088
CRPC1500A5FP 1500 575/3/60 $56,294
CRPC2000A4FP 2000 460/3/60 $65,197
CRPC2000A5FP 2000 575/3/60 $68,681
40
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CRPC SERIES AIR DRYER WITH NO FILTRATION PACKAGE
List Price
Model Flow Voltage
Air Cooled
CRPC75A1 75 115/1/60 $5,163
CRPC100A1 100 115/1/60 $5,313
CRPC150A1 150 115/1/60 $6,892
CRPC200A4 200 460/3/60 $9,774
CRPC200A5 200 575/3/60 $11,039
CRPC300A4 300 460/3/60 $11,819
CRPC300A5 300 575/3/60 $12,879
CRPC450A4 450 460/3/60 $16,172
CRPC450A5 450 575/3/60 $18,520
CRPC550A4 550 460/3/60 $18,496
CRPC550A5 550 575/3/60 $19,746
CRPC800A4 800 460/3/60 $26,657
CRPC800A5 800 575/3/60 $27,963
CRPC1000A4 1000 460/3/60 $36,180
CRPC1000A5 1000 575/3/60 $38,633
CRPC1250A4 1250 460/3/60 $38,251
CRPC1250A5 1250 575/3/60 $39,860
CRPC1500A4 1500 460/3/60 $45,315
CRPC1500A5 1500 575/3/60 $47,708
CRPC2000A4 2000 460/3/60 $51,980
CRPC2000A5 2000 575/3/60 $53,350
CRPC SERIES WATER COOLED DRYER WITH NO FILTRATION PACKAGE
List Price
Model Flow Voltage
Water Cooled
CRPC800W4 800 460/3/60 C/F
CRPC800W5 800 575/3/60 C/F
CRPC1000W4 1000 460/3/60 C/F
CRPC1000W5 1000 575/3/60 C/F
CRPC1250W4 1250 460/3/60 C/F
CRPC1250W5 1250 575/3/60 C/F
CRPC1500W4 1500 460/3/60 C/F
CRPC1500W5 1500 575/3/60 C/F
CRPC2000W4 2000 460/3/60 C/F
CRPC2000W5 2000 575/3/60 C/F
41
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CAPACITY CORRECTION FACTORS
To adjust the dryer capacity for the non‐standard conditions, use the Capacity Correction Factors (multipliers) from Tables, 1, 2 &3.
Table 1‐ Inlet Pressure
75 PSIG 120 PSIG 150 PSIG 225 PSIG 15.5
Inlet Air Pressure 100 PSIG 6.9 BAR
5.2 BAR 8.3 BAR 10.3 BAR BAR
Multiplier 0.86 1.00 1.04 1.09 1.15
Table 2‐ Inlet Air Temperature
CRPC75‐FP
CRPCMKF1 $921.08
CRPC100‐FP
CRPC400‐FP No Loss Drain Valve Repair Kit, Drain Cover, Prefilter
Standard Kit with Ship Loose Filtration Element, Afterfilter Element, Filter Drain Valve Repair CRPCMKF5 $1,474.33
CRPC450‐FP
Kit (2)
CRPC550‐FP CRPCMKF6 $1,831.43
CRPC800‐1000‐
CPRCMK7 $1,627.50
FP
CRPC1250‐FP CPRCMK8 $1,737.50
42
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Refrigerated Dryers‐ Cycling
CRE SERIES MAINTENANCE KIT PRICING
43
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Refrigerated Dryers
CRH Series (20 ‐ 125 SCFM) ‐ High Inlet Temperature
CRH SERIES AIR DRYER WITH FILTRATION PACKAGE
REFRIGERANT
POWER IN/OUT
FLOW CAPACITY COMPRESSOR REFRIGERANT
MODEL LIST PRICE REQUIREMENTS CONNECTIONS
CAPACITY TYPE**
SCFM* kW NPT BTU/hr
CRH201FP 20 $ 3,958.00 0.69 3/4" 4982 R-134a
CRH251FP 25 $ 4,047.00 0.69 3/4" 4982 R-134a
CRH351FP 35 $ 4,947.00 0.99 3/4" 9724 R-407c
CRH501FP 50 $ 6,108.00 0.83 1" 12420 R-407c
CRH751FP 75 $ 7,016.00 1.13 1" 12420 R-407c
CRH1252FP 125 $ 9,837.00 1.97 1" 19300 R-407c
CRH SERIES AIR DRYER ONLY
CRH201 20 $ 2,929.00 0.69 3/4" 4982 R-134a
CRH251 25 $ 3,021.00 0.69 3/4" 4982 R-134a
CRH351 35 $ 3,944.00 0.99 3/4" 9724 R-407c
CRH501 50 $ 4,680.00 0.83 1" 12420 R-407c
CRH751 75 $ 5,610.00 1.13 1" 12420 R-407c
CRH1252 125 $ 8,503.00 1.97 1" 19300 R-407c
*Rating conditions are 180°F inlet temperature, 125 psig inlet pressure, 100% inlet relative humidity, 100°F ambient temperature.
**Refer to dryer data plate for refrigerant charge.
***To ensure optimal performance, do not operate continuously in conditions below or above max/min specifications.
Maximum operating pressure: 225 psig
Maximum inlet temperature: 180ºF (82ºC)
Cannot be shipped UPS
FILTRATION PACKAGE (‐FP OPTION)
FILTRATION PACKAGE
FILTER PACK OPTION INCLUDES Pre‐Filter 1.0 Micron After‐Filter 0.01 Micron 99.99% Oil
CRH20-FP CFL100CDG CFL100EDG
CRH25-FP CFL100CDG CFL100EDG
CRH35-FP CFL100CDG CFL100EDG
CRH50-FP CFL170CDG CFL170EDG
CRH75-FP CFL170CDG CFL170EDG
CRH125-FP CFL170CDG CFL170EDG
44
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CRH Maintenance Kits: Prior to 8/1/00 thru 12/15/19
Kit P/N Used On List Price Purchased Time Contents
CRHMK1 CRH 20, 25, 35 Prior to 8/1/00
$325.66 Separator element & O-ring, drain mechanism, O-ring for bowl, screen
CRHMK2 CRH 50, 75 Prior to 8/1/00 for inlet strainer, ambient air filter, service reminder decal
$383.78
CRHMK4 CRH 20, 25, 35 8/1/00-12/15/19
$316.64
CRHMK6 CRH 50 $329.01 8/1/00-12/15/19 Filter element, drain mechanism, wave spring, O-ring for bowl, screen
CRHMK5 CRH 75 $329.01 8/1/00-12/15/19 for inlet strainer, ambient air filter, service reminder decal
CRH Standard Maintenance Kits: Dryers Purchased 12/15/19 and beyond
CRH Standard Maintenance Kits with Filtration (‐FP Dryers): Dryers Purchased 12/15/19 and beyond
45
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Desiccant Dryers ‐ Heatless
XCHL Series (90‐3300 SCFM)
* Dryer weight shown does not included desiccant. Desiccant shipped separately.
XCHL dryers: UL508A‐Industrial control panel standard.
F.O.B. Shipping Point: West Chester, PA
46
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XCHL Series List Pricing Configurations
ADD THE BELOW OPTION TEXT TO THE MODEL NUMBER TO OBTAIN PART NUMBER
1H00AA 1H00AH 1HE0AA 1HEAAZ01 BHE0AA 1HE0AH 1HE0AHZ01
Standard
Model Standard Standard Unit Standard Unit with
Standard Unit Standard Unit Unit with
Standard Unit Unit with with EMS & EMS & 3‐Valve &
with 3‐Valve with EMS & LDP EMS & 3‐
EMS Ethernet Ethernet
Valve
XCHL90 $ 11,045 $ 12,190 $ 16,447 $ 17,530 $ 17,655 $ 17,591 $ 18,675
XCHL120 $ 11,716 $ 12,861 $ 17,117 $ 18,201 $ 18,325 $ 18,261 $ 19,347
XCHL160 $ 13,053 $ 14,972 $ 18,454 $ 19,538 $ 19,663 $ 19,912 $ 20,995
XCHL200 $ 13,855 $ 15,774 $ 19,255 $ 20,341 $ 20,465 $ 20,714 $ 21,800
XCHL250 $ 15,137 $ 17,057 $ 20,537 $ 21,622 $ 21,745 $ 21,995 $ 23,078
XCHL300 $ 16,634 $ 19,409 $ 22,034 $ 23,119 $ 23,244 $ 23,493 $ 24,577
XCHL400 $ 19,309 $ 22,083 $ 24,710 $ 25,794 $ 25,920 $ 26,166 $ 27,250
XCHL500 $ 22,249 $ 25,023 $ 27,650 $ 28,734 $ 28,859 $ 29,108 $ 30,192
XCHL600 $ 25,368 $ 28,142 $ 30,769 $ 31,854 $ 31,978 $ 32,227 $ 33,312
XCHL800 $ 29,572 $ 34,548 $ 34,971 $ 36,056 $ 36,838 $ 37,887 $ 38,971
XCHL1000 $ 35,037 $ 40,013 $ 40,436 $ 41,523 $ 42,305 $ 43,351 $ 44,438
XCHL1200 $ 39,627 $ 44,604 $ 45,028 $ 46,112 $ 46,895 $ 47,943 $ 49,028
XCHL1500 $ 55,053 $ 57,968 $ 60,452 $ 61,538 $ 62,321 $ 63,369 $ 64,453
XCHL1800 $ 57,979 $ 60,896 $ 63,380 $ 64,465 $ 65,246 $ 66,296 $ 67,381
XCHL2100 $ 63,642 $ 71,058 $ 69,042 $ 70,127 $ 71,958 $ 76,460 $ 77,544
XCHL2700 $ 71,880 $ 73,898 $ 71,880 $ 72,966 $ 80,197 $ 79,299 $ 80,384
XCHL3300 $ 97,307 $ 110,640 $ 102,707 $ 103,791 $ 105,623 $ 116,041 $ 117,126
Consult Factory
Model BHE0AH 1HESAA 1HG0AA 1H00A0
for Part Number
Standard Unit Standard Unit Standard Standard Unit
Standard Unit
with EMS & 3‐ with EMS & 4‐20 Unit with with 3‐Valve &
Minus Filtration
Valve & LDP mA Output EMS & FTS EMS & FTS
XCHL90 $ 18,800 $ 17,483 $ 17,094 $ 10,498 $ 18,132
XCHL120 $ 19,549 $ 18,154 $ 17,764 $ 11,198 $ 18,802
XCHL160 $ 21,807 $ 19,492 $ 19,104 $ 12,482 $ 20,453
XCHL200 $ 22,754 $ 20,294 $ 19,906 $ 13,180 $ 21,255
XCHL250 $ 24,048 $ 21,575 $ 21,185 $ 14,581 $ 22,536
XCHL300 $ 26,596 $ 23,073 $ 22,684 $ 15,980 $ 24,034
XCHL400 $ 28,894 $ 25,746 $ 25,359 $ 18,256 $ 26,707
XCHL500 $ 32,967 $ 28,688 $ 28,299 $ 21,578 $ 29,649
XCHL600 $ 36,376 $ 31,409 $ 31,420 $ 24,493 $ 32,768
XCHL800 $ 43,646 $ 36,008 $ 35,619 $ 28,576 $ 38,428
XCHL1000 $ 49,614 $ 41,474 $ 41,086 $ 33,943 $ 43,892
XCHL1200 $ 54,634 $ 46,065 $ 45,677 $ 38,374 $ 48,484
XCHL1500 $ 62,251 $ 61,491 $ 61,101 $ 53,071 $ 63,910
XCHL1800 $ 73,210 $ 64,417 $ 64,028 $ 54,819 $ 66,837
XCHL2100 $ 79,375 $ 70,080 $ 69,692 $ 58,317 $ 77,001
XCHL2700 $ 87,615 $ 72,920 $ 72,530 $ 62,984 $ 79,840
XCHL3300 $ 117,288 $ 103,746 $ 103,356 $ 87,476 $ 116,582
47
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XCHL Series List Pricing Configurations
Model Standard
Standard Unit Standard Unit
Standard Unit Unit minus Standard Unit
with 3‐valve minus Filtration
with CRN Filtration & with EMS & CRN
bypass & CRN with EMS & CRN
CRN
XCHL90 $ 11,045 $ 12,190 $ 10,498 $ 15,899 $ 16,421
XCHL120 $ 11,716 $ 12,861 $ 11,198 $ 16,598 $ 17,091
XCHL160 $ 13,053 $ 14,972 $ 12,482 $ 17,880 $ 18,430
XCHL200 $ 13,855 $ 15,774 $ 13,180 $ 18,581 $ 19,232
XCHL250 $ 15,137 $ 17,057 $ 14,581 $ 19,980 $ 20,512
XCHL300 $ 16,634 $ 19,409 $ 15,980 $ 21,381 $ 22,010
XCHL400 $ 19,309 $ 22,083 $ 18,256 $ 23,655 $ 24,686
XCHL500 $ 22,249 $ 25,023 $ 21,578 $ 26,979 $ 27,625
XCHL600 $ 25,368 $ 28,142 $ 24,493 $ 29,894 $ 30,743
XCHL800 $ 29,572 $ 34,548 $ 28,576 $ 33,976 $ 34,946
XCHL1000 $ 35,037 $ 40,013 $ 33,943 $ 33,976 $ 40,411
XCHL1200 $ 39,627 $ 44,604 $ 38,374 $ 43,774 $ 45,003
XCHL1500 $ 46,250 $ 46,250 $ 53,071 $ 58,470 C/F
XCHL1800 $ 57,979 C/F $ 54,819 $ 60,219 C/F
XCHL2100 $ 63,642 C/F $ 58,317 $ 63,719 C/F
XCHL2700 $ 66,480 C/F $ 62,984 $ 68,383 C/F
XCHL3300 C/F C/F C/F C/F C/F
Design Specs
Inlet Temp: 80F to 120F
Operating Pressure: 80 psi to 150 psi
*Consult factory customer service for part number
**304SS Control Tubing List Price Adder:
XCHL90‐600: $4,865
XCHL800‐2700: $5,105
XCHL3300: $5,805
**For EMS Controller Option, please consult factory customer service if also needing 304SS or 316SS control tubing.
**For 316SS Control Tubing please consult factory customer service for quote.
**If you need further options not listed above, please consult factory customer service for quote.
**For maintenance kit information please consult factory
48
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Desiccant Dryers ‐ Heatless
CDT Series (40 ‐ 5400 SCFM)
Configuration: CDT99A
Control
Flow Controls Tubing Filter/Bypass Valves Options
40 - 5400 B = Basic B = Standard F0 = 0 bypass
S = Standard C = Copper F3 = 3 valve bypass D2 = Digital Dew Point Monitor w/ High
S = Stainless F7 = 7 valve bypass Humidity Alarm (-148°F) *
L = Low Ambient Protection
P = Sandblast & Epoxy Paint
V = 250 psig MWP with standard controller
X1 = NEMA 7
49
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CDT Options
Mounted Filters (3)
Options = F0 F3 F7 D2 (5)
Mtd Mtd Filters Mtd Filters Dew Point
Model Filters w/ 3-valve w/ 7 valve Monitor
no by-pass by-pass by-pass (-148) F
CDT40 $1,334 $1,567 $3,233 $9,126
CDT60 $1,372 $1,951 $3,533 $9,126
CDT90 $1,663 $2,100 $3,966 $9,126
CDT115 $2,418 $3,251 $4,514 $9,126
CDT165 $2,418 $3,318 $4,816 $9,126
CDT260 $3,599 $4,415 $5,980 $9,126
CDT370 $3,650 $4,482 $6,046 $9,126
CDT450 $4,415 $5,199 $6,796 $9,126
CDT590 $7,150 $9,461 $12,576 $9,126
CDT750 $8,245 $10,528 $13,774 $9,126
CDT930 $9,943 $12,259 $16,216 $9,126
CDT1130 $10,444 $13,360 $17,576 $9,126
CDT1350 $13,873 $16,855 $22,666 $9,126
CDT1550 $14,390 $16,953 $23,118 $9,126
CDT2100 $19,769 $23,199 $29,777 $9,126
CDT3000 $21,419 $27,845 $37,071 $9,126
CDT4100 $41,432 $48,759 $59,318 $9,126
CDT5400 $41,432 $48,759 $59,318 $9,126
3) Includes Grade E (.01 micron) prefilter and Grade D (1 micron) reverse flow afterfilter. Prefilters are equipped with Gauge (slide
indicator on DGH 40 & 60) and Automatic Drain. Afterfilters are equipped with a gauge. Additional packages available for -
100°F dewpoint and oil-free air. Submit Request to Quote form to Customer Service.
(4) For units with the Standard Control (S), provides user selectable energy savings. Tailor the drying cycles, to match your peak air
demand, in 10 percent increments. The controller offers four pressure dew point settings to further tune your savings and adapt the
system to your environment.
For units with Energy Savings Control (E), automatically matches purge air use to the demand on the system. This ensures maximum
performance as the energy savings goes right to your bottom line. Controller features vacuum fluorescent test display
that communicates energy savings, operating mode and service reminders. Select from one of the four pressure dew point settings
to optimize your savings for each person.
(5) Digital readout range: -148ºF to +68ºF (-100ºC to +20ºC) pressure dew point. Panel mounted display switchable from ºF to ºC.
Recorder output selectable between 4-20 mA. Two sets of dry contacts for warning alarm. Mounted to dryer.
CONTROLLER FEATURES:
Basic control (B): Traditional heatless drying technology using a simple timer based controller, these are designed to deliver maximum
value to applications that operate at or near full capacity. Automatic time controlled bed regeneration cycles offer consistent performance
and economy of purchase.
Standard control (S): Standard controller provides the user selectable energy savings. Tailor the drying cycles, to match your peak air
demand, in 10 percent increments. In addition this state of the art controller offers four pressure dew points settings to further tune it to
your savings and adapt the system to your environment.
Energy Savings control (E): This controller automatically matches purge air to the demand on the system. This ensures maximum
performance as the energy savings goes right to your bottom line. Controller features vacuum fluorescent text display that communicates
energy savings, operating mode, and service reminders. Select from one of the four pressure dew point settings to optimize your savings for
each season.
50
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CDT Options Continued
Sandblast & Epoxy Pilot & Instrument Air Low Ambient Protection
Options = Paint Tubing & Fittings
P S C L
Dryer 316L
NEMA 4 Dryer w/Mtd
Model Dryer only W/Mtd Stainless Copper Dryer only
Filters
Filters Steel
CDT40 $1,529 $2,150 $3,851 $3,628 $7,012 $8,712
CDT60 $1,529 $2,150 $3,851 $3,628 $7,012 $8,712
CDT90 $1,529 $2,150 $3,851 $3,628 $7,012 $8,712
CDT115 $2,849 $3,982 $6,446 $5,960 $7,628 $9,744
CDT165 $2,849 $3,982 $6,446 $5,960 $7,628 $9,744
CDT260 $2,849 $3,982 $6,446 $5,960 $7,628 $9,744
CDT370 $2,849 $3,982 $7,746 $7,127 $8,479 $11,608
CDT450 $2,849 $3,982 $7,746 $7,127 $8,479 $11,608
CDT590 $2,849 $3,982 $7,746 $7,127 $8,479 $11,608
CDT750 $2,849 $3,982 $8,079 $7,516 $9,343 $12,459
CDT930 $2,849 $3,982 $8,079 $7,516 $9,343 $12,459
CDT1130 $4,350 $6,082 $8,079 $7,516 $11,457 $15,207
CDT1350 $4,350 $6,082 $8,596 $7,905 $11,457 $15,207
CDT1550 $4,350 $6,082 $8,596 $7,905 $12,742 $16,573
CDT2100 $4,350 $6,082 $8,596 $7,905 $12,742 $16,573
CDT3000 $5,980 $8,378 $8,596 $7,905 $14,390 $18,719
CDT4100 $5,980 $8,378 $8,596 $7,905 $15,923 $20,270
CDT5400 $5,980 $8,378 $8,596 $7,905 $15,923 $20,270
Note: Options L and X1 cannot be used on the same model. Low ambient heat tape will not protect the control box.
High Pressure 250 High Pressure Valving
Explosion Proof Explosion Proof Electrics
psig MWP w/ 250 psig MWP with
Model Electrics Standard Energy Saving Control
Standard energy savings
Control (S) Selected (E) Selected
Controller Controller
Option = X1 X1 V X
CDT40 $11,010 $16,855 $2,118 $2,118
CDT60 $11,010 $16,855 $2,502 $2,502
CDT90 $11,010 $16,855 $3,152 $3,152
CDT115 $11,010 $16,855 $3,418 $3,418
CDT165 $11,010 $16,855 $3,701 $3,701
CDT260 $11,010 $16,855 $4,434 $4,434
CDT370 $11,010 $16,855 $5,365 $5,365
CDT450 $11,010 $16,855 $5,880 $5,880
CDT590 $11,010 $16,855 $6,780 $6,780
CDT750 $11,010 $16,855 $8,229 $8,229
CDT930 $11,010 $16,855 $10,145 $10,145
CDT1130 $11,010 $16,855 $11,409 $11,409
CDT1350 $11,010 $16,855 $13,091 $13,091
CDT1550 $11,010 $16,855 $15,807 $15,807
CDT2100 $11,010 $16,855 $18,786 $18,786
CDT3000 $11,010 $16,855 $19,335 $19,335
CDT4100 $11,010 $16,855 $31,109 $31,109
CDT5400 $11,010 $16,855 $31,109 $31,109
51
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CDT Maintenance Kits:
Kit P/N Models Used On List Price Weight (lbs) Kit Contents
CDTMK1 CDT 40 $412.90 2 Ø Internal drain mechanisms/valve rebuild kits
CDTMK1.5 CDT 60 $417.50 2 Ø Head o-rings/hand hold gasket
CDTMK2 CDT 90 $488.23 2 Ø Pilot air filter element
CDTMK3 CDT 115, 165 $557.46 2 Ø Grade D & E elements
CDTMK4 CDT 260 $1,274.26 2
CDTMK4.5 CDT 370 $772.21 2
CDTMK5 CDT 450 $793.55 2
CDTMK6 CDT 590 $1,519.68 2 These kits are for units that have the mounted
CDTMK7 CDT 750 $1,746.62 2 filter package.
CDTMK8 CDT 930 $2,578.17 2
CDTMK9 CDT 1130 $2,746.57 2 For units that do not have the mounted filters
refer to the operator manual for the appropriate
replacement parts.
52
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Desiccant Dryers: Heated Blower Purge
XCHP Series (150‐3000 SCFM)
XCHP Series Product Specifications
MODEL Capacity ‐40F Blower In/Out Connection Dimensions Weight
scfm kW in WxDxH lbs
XCHP150 150 0.75 1 NPT 44.5x32x66 758
XCHP200 200 0.75 1 1⁄2 NPT 48.5x32x67 913
XCHP250 250 1.1 1 1⁄2 NPT 52.5x35x68 1,119
XCHP300 300 1.1 1 1⁄2 NPT 52.5x35x68 1,191
XCHP400 400 1.5 2 NPT 56.5x34x82 1,539
XCHP500 500 1.5 2 NPT 56.5x34x82 1,707
XCHP600 600 3.7 3 NPT 64x47x86 2,369
XCHP800 800 3.7 3 NPT 64x47x86 2,681
XCHP1000 1000 5.6 3 NPT 78.5x48x80 3,043
XCHP1200 1200 5.6 3 NPT 78.5x48x80 3,285
XCHP1500 1500 11.2 3 NPT 84x55x92 4,480
XCHP1800 1800 11.2 4 FLG 84x60x92 4,956
XCHP2100 2100 11.2 4 FLG 84x60x92 5,350
XCHP3000 3000 14.9 6 FLG 96x73x100 7,750
53
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XCHP Series List Pricing Configurations
EMS STANDARD ABOVE 2100 CFM EMS STANDARD ABOVE 2100 CFM
EMS STANDARD ABOVE 2100 SCFM
54
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XCHP Series List Pricing Options
OPTION NAME: LIST PRICE 4‐8MM Activated Alumina
POWER SAVER $1,298.00 Part Number 698350B
HIGH HUMIDITY ALARM $1,212.00 Quantity lbs Price
HIGH OUTLET TEMP ALARM $882.00 50 $154.56
STEAM HEAT REACTIVATION CONSULT FACTORY 2‐5MM Activated Alumina
INDOOR TOWER DEW POINT
Part Number 699279B
OPTION LIST PRICE BY CFM INSULTATION ‐100F (‐73C)
150 $3,580 $1,732 Quantity lbs Price
200 $3,650 $2,107 50 $154.56
250 $4,028 $2,264
300 $4,028 $2,432
400 $4,924 $2,911
500 $4,924 $3,353
600 $5,359 $4,100
800 $5,359 $4,854
1000 $5,757 $5,409
1200 $5,757 $5,804
1500 $6,511 $7,163
1800 $6,511 $8,246
2100 $6,511 $9,182
3000 C/F $12,982
*CONSULT FACTORY FOR DRYER PART NUMBER WHEN ADDITIONAL OPTIONS ARE REQUIRED FROM ABOVE LIST
Standard Dryer Includes: 460/3/60, prefilter and afterfilter mounted (loose on HB1800 and larger), NEMA 4 Microprocessor Controls,
High Heater Temp Alarm, Failure to Shift Alarm, Heater Failure, Heater Operation & Temp, Blower Operation, Regeneration Sequence
Status, Failure Code Storage, Heater Fault Alarm, Factory filled desiccant (loose on XGHB3000 and larger), 150 pisig max operating
pressure.
EMS Option: Includes dew point demand control with digital display
3VB: Valves allow dryer to be bypassed
Consult Factory for Altitudes Above 1000 FT
Contact Customer Service for options not listed.
Warranty:
X Series desiccant dryers are warranted to be free from defects in material and workmanship for a period of 12 months from
the original date of shipment from the factory. To allow the warranty to be in effect for 12 months from the date of equipment
start-up, the Warranty Registration Card must be completed and returned to Champion Warranty within 30 days of start up.
The total warranty period cannot exceed 18 months from the original date of shipment from the factory. For extended
warranty up to 5 years for total dryer, filtration and yearly maintenance must be established.
**For maintenance kit information please consult factory
55
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XCHP Series service Kits
MODEL YEAR 1 & 5 YEAR 2 & 4 YEAR 3
XCHP150 47738304058 47738304059 47738304060
XCHP200 47738304061 47738304062 47738304063 **For List Pricing of Kits
XCHP250 47738304064 47738304065 47738304066 Please Contact Customer
XCHP300 47738304067 47738304068 47738304069 Service.
XCHP400 47738304070 47738304071 47738304072
XCHP500 47738304073 47738304074 47738304075
XCHP600 47738304076 47738304077 47738304078
XCHP800 47738304079 47738304080 47738304081
XCHP1000 47738304082 47738304083 47738304084
XCHP1200 47738304085 47738304086 47738304087
XCHP1500 47738304088 47738304089 47738304090
XCHP1800 47738304091 47738304092 47738304093
XCHP2100 47738304094 47738304095 47738304096
XCHP3000 47738304097 47738304098 47738304099
YEAR 1 & 5 INCLUDES: YEAR 2 & 4 INCLUDEDS: Year 3 INCLUDES:
Element Prefilter Valve Inlet Seal Kit BMI
Element Afterfilter Valve Purge Seal Kit Desiccant
Float Drain Element Prefilter Element Prefilter
Desiccant Test Kit Element Afterfilter Element Afterfilter
Muffler Float Drain Float Drain
Desiccant Test Kit Desiccant Test Kit
Muffler Muffler
Mounted Filtration Element Information
Pre Filter After Filter Element
Dryer Model PF Element List Price AF Element List Price
Element PN PN
XCHP150 XCHE235E $100.15 47723655002 $2,423.50
XCHP200 XCHE288E $100.15 47723656002 $882.10
XCHP250 XCHE288E $100.15 47723656002 $882.10
XCHP300 XCHE353E $134.69 47723656002 $882.10
XCHP400 XCHE589E $147.36 47723657002 $882.10
XCHP500 XCHE589E $147.36 47723657002 $882.10
XCHP600 XCHE1077E $196.85 47723658002 $1,476.65
XCHP800 XCHE1077E $196.85 47723658002 $1,476.65
XCHP1000 XCHE1077E $196.85 47723658002 $1,476.65
XCHP1200 XCHE1354E $256.72 47723659002 $2,013.60
XCHP1500 XCHE1589E $256.72 47723659002 $2,013.60
XCHP1800 XCHE600E $144.00 XCGP600E‐HT $163.00
XCHP2100 XCHE600E $144.00 XCGP600E‐HT $163.00
XCHP3000 XCHE600E $144.00 XCGP600E‐HT $163.00
*See Filtration Pages for Qty Per Unit Needed of the Pre Filter and After Filter Elements
56
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Desiccant Dryers: Heated Blower Purge
XCHB Series (150‐3000 SCFM)
F.O.B. Shipping Point: West Chester, PA
XCHB Series Product Specifications
Capacity ‐40F Blower In/Out Connection Dimensions Weight
MODEL
scfm kW in WxDxH lbs
XCHB150 150 0.75 1 NPT 45x33x66 1,050
XCHB200 200 0.75 1 1⁄2 NPT 49x37x67 1,150
XCHB250 250 1.1 1 1⁄2 NPT 53x38x68 1,400
XCHB300 300 1.1 1 1⁄2 NPT 53x38x68 1,500
XCHB400 400 1.5 2 NPT 57x48x83 1,900
XCHB500 500 1.5 2 NPT 57x48x83 2,100
XCHB600 600 3.7 3 NPT 64x59x88 2,800
XCHB800 800 3.7 3 NPT 64x59x88 3,200
XCHB1000 1000 5.6 3 NPT 78x59x80 3,767
XCHB1200 1200 5.6 3 NPT 78x59x80 4,100
XCHB1500 1500 11.2 3 NPT 98x65x92 5,515
XCHB1800 1800 11.2 4 FLG 98x68x92 6,113
XCHB2100 2100 11.2 4 FLG 98x67x92 6,911
XCHB3000 3000 14.9 6 FLG 120x78x100 9,730
57
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XCHB Series List Pricing Configurations
EMS STANDARD ABOVE 2100 CFM EMS STANDARD ABOVE 2100 CFM
EMS STANDARD ABOVE 2100 SCFM
58
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XCHB Series List Pricing Options
OPTION NAME: LIST PRICE 4‐8MM Activated Alumina
POWER SAVER $1,242.51 Part Number 698350B
HIGH HUMIDITY ALARM $1,159.95 Quantity lbs Price
HIGH OUTLET TEMP ALARM $844.36 50 $152
COMPRESSED AIR COOLDOWN STANDARD 2‐5MM Activated Alumina
STEAM HEAT REACTIVATION CONSULT FACTORY Part Number 699279B
INDOOR TOWER INSULATION BY SCFM Quantity lbs Price
150 $3,580.04 50 $152
200 $3,650.30
250 $4,028.06
300 $4,028.06
400 $4,924.09
500 $4,924.09
600 $5,358.87
800 $5,358.87
1000 $5,756.99
1200 $5,756.99
1500 $6,511.48
1800 $6,511.48
2100 $6,511.48
3000 C/F
*CONSULT FACTORY FOR DRYER PART NUMBER WHEN ADDITIONAL OPTIONS ARE REQUIRED FROM ABOVE LIST
Standard Dryer Includes: 460/3/60, prefilter and afterfilter mounted (loose on HB1800 and larger), NEMA 4 Microprocessor
Controls, High Heater Temp Alarm, Failure to Shift Alarm, Heater Failure, Heater Operation & Temp, Blower Operation,
Regeneration Sequence Status, Failure Code Storage, Heater Fault Alarm, Factory filled desiccant (loose on XCHB3000 and
larger), 150 pisig max operating pressure.
EMS Option: Includes dew point demand control with digital display
3VB: Valves allow dryer to be bypassed
Consult Factory for Altitudes Above 1000 FT
Contact Customer Service for options not listed.
Warranty:
X Series desiccant dryers are warranted to be free from defects in material and workmanship for a period of 12 months from
the original date of shipment from the factory. To allow the warranty to be in effect for 12 months from the date of equipment
start-up, the Warranty Registration Card must be completed and returned to Champion Warranty within 30 days of start up.
The total warranty period cannot exceed 18 months from the original date of shipment from the factory. For extended warranty
up to 5 years for total dryer, filtration and yearly maintenance must be established.
**For maintenance kit information please consult factory
59
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XCHB Series service Kits
MODEL YEAR 1 & 5 YEAR 2 & 4 YEAR 3
XCHB150 47738304058 47738304059 47738304060
XCHB200 47738304061 47738304062 47738304063 **For List Pricing of Kits
XCHB250 47738304064 47738304065 47738304066 Please Look Up Via CC360
XCHB300 47738304067 47738304068 47738304069
XCHB400 47738304070 47738304071 47738304072
XCHB500 47738304073 47738304074 47738304075
XCHB600 47738304076 47738304077 47738304078
XCHB800 47738304079 47738304080 47738304081
XCHB1000 47738304082 47738304083 47738304084
XCHB1200 47738304085 47738304086 47738304087
XCHB1500 47738304088 47738304089 47738304090
XCHB1800 47738304091 47738304092 47738304093
XCHB2100 47738304094 47738304095 47738304096
XCHB3000 47738304097 47738304098 47738304099
YEAR 1 & 5 INCLUDES: YEAR 2 & 4 INCLUDEDS: Year 3 INCLUDES:
Element Prefilter Valve Inlet Seal Kit BMI
Element Afterfilter Valve Purge Seal Kit Desiccant
Float Drain Element Prefilter Element Prefilter
Desiccant Test Kit Element Afterfilter Element Afterfilter
Muffler Float Drain Float Drain
Desiccant Test Kit Desiccant Test Kit
Muffler Muffler
Mounted Filtration Element Information
Dryer Model Pre Filter PF Element List Price After Filter Element PN AF Element List Price
XCHB150 XCHE235E $100.15 47723655002 $2,423.50
XCHB200 XCHE288E $100.15 47723656002 $882.10
XCHB250 XCHE288E $100.15 47723656002 $882.10
XCHB300 XCHE353E $134.69 47723656002 $882.10
XCHB400 XCHE589E $147.36 47723657002 $882.10
XCHB500 XCHE589E $147.36 47723657002 $882.10
XCHB600 XCHE1077E $196.85 47723658002 $1,476.65
XCHB800 XCHE1077E $196.85 47723658002 $1,476.65
XCHB1000 XCHE1077E $196.85 47723658002 $1,476.65
XCHB1200 XCHE1354E $256.72 47723659002 $2,013.60
XCHB1500 XCHE1589E $256.72 47723659002 $2,013.60
XCHB1800 XCHE600E $144.00 XCGP600E‐HT $163.00
XCHB2100 XCHE600E $144.00 XCGP600E‐HT $163.00
XCHB3000 XCHE600E $144.00 XCGP600E‐HT $163.00
*See Filtration Pages for Qty Per Unit Needed of the Pre Filter and After Filter Elements
60
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Modular Desiccant Dryer
XCML Series
Model Flow (SCFM) Options
XCML3 3 E: Energy Management System
XCML9 9 N: ‐100F Dew Point
XCML15 15
XCML24 24
XCML32 32
XCML41 41
XCML59 59
XCML88 88
XCML118 118
XCML147 147
XCML177 177
*Standard Units are rated to a ‐40F Dew Point
XCML Dryers: XCML Replacement Kits:
Model Flow (SCFM) List Price Dryer Model Yearly Kit List Price Year 3 Kit List Price
XCML3 3 $ 2,133 XCML3 47712285001 $263.39 N/A N/A
XCML9 9 $ 2,826 XCML9 47712285001 $263.39 N/A N/A
XCML15 15 $ 3,537 XCML15 47712285001 $263.39 N/A N/A
XCML24 24 $ 4,774 XCML24 47712289001 $483.30 47712290001 $652.46
XCML24E 24 $ 8,614 XCML24E 47712289001 $483.30 47712290001 $652.46
XCML24N 24 $ 5,517 XCML24N 47712289001 $483.30 47712290001 $652.46
XCML32 32 $ 5,624 XCML32 47712294001 $499.00 47712290001 $652.46
XCML32E 32 $ 9,463 XCML32E 47712294001 $499.00 47712290001 $652.46
XCML32N 32 $ 6,367 XCML32N 47712294001 $499.00 47712290001 $652.46
XCML41 41 $ 6,362 XCML41 47712294001 $499.00 47712290001 $652.46
XCML41E 41 $ 10,202 XCML41E 47712294001 $499.00 47712290001 $652.46
XCML41N 41 $ 7,166 XCML41N 47712294001 $499.00 47712290001 $652.46
XCML59 59 $ 7,852 XCML59 47712304001 $491.76 47712305001 $705.62
XCML59E 59 $ 11,690 XCML59E 47712304001 $491.76 47712305001 $705.62
XCML59N 59 $ 8,719 XCML59N 47712304001 $491.76 47712305001 $705.62
XCML88 89 $ 9,821 XCML89 47712304001 $491.76 47712305001 $705.62
XCML88E 89 $ 13,661 XCML89E 47712304001 $491.76 47712305001 $705.62
XCML88N 89 $ 10,750 XCML89N 47712304001 $491.76 47712305001 $705.62
XCML118 118 $ 12,243 XCML118 47712314001 $740.65 47712315001 $1,225.16
XCML118E 118 $ 16,081 XCML118E 47712314001 $740.65 47712315001 $1,225.16
XCML118N 118 $ 13,234 XCML118N 47712314001 $740.65 47712315001 $1,225.16
XCML147 148 $ 12,890 XCML148 47712319001 $768.45 47712315001 $1,225.16
XCML147E 148 $ 16,730 XCML148E 47712319001 $768.45 47712315001 $1,225.16
XCML147N 148 $ 13,944 XCML148N 47712319001 $768.45 47712315001 $1,225.16
XCML177 177 $ 13,768 XCML177 47712319001 $768.45 47712315001 $1,225.16
XCML177E 177 $ 17,608 XCML177E 47712319001 $768.45 47712315001 $1,225.16
XCML177N 177 $ 14,884 XCML177N 47712319001 $768.45 47712315001 $1,225.16
**Purchase the yearly kit every year and on year 3 also purchase that kit. See manual for kit part descriptions.
61
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XCML Series: Modular Desiccant Dryer
Desiccant
Flow PDP Connections Dimensions
per tower
W D H Weight
SCFM °F NPT (in) lb
inches inches inches lb
XCML3 3 ‐40 3/8" 9.4 8.3 16.7 24.2 1.5
XCML9 9 ‐40 3/8" 9.4 8.3 32.4 39.7 4.7
XCML15 15 ‐40 3/8" 9.4 8.3 42.2 59.5 6.6
XCML24N 19* ‐100 3/4" 18.7 15.9 38.1 97 14.1
XCML24 24 ‐40 3/4" 18.7 15.9 38.1 97 14.1
XCML24E 24 ‐40 3/4" 18.7 15.9 38.1 97 14.1
XCML32N 26* ‐100 3/4" 18.7 15.9 44.0 110.2 18.4
XCML32 32 ‐40 3/4" 18.7 15.9 44.0 110.2 18.4
XCML32E 32 ‐40 3/4" 18.7 15.9 44.0 110.2 18.4
XCML41N 33* ‐100 3/4" 18.7 15.9 51.9 132.2 24.0
XCML41 41 ‐40 3/4" 18.7 15.9 51.9 132.2 24.0
XCML41E 41 ‐40 3/4" 18.7 15.9 51.9 132.2 24.0
XCML59N 47* ‐100 1" 18.7 15.9 65.9 160.9 33.9
XCML59 59 ‐40 1" 18.7 15.9 65.9 160.9 33.9
XCML59E 59 ‐40 1" 18.7 15.9 65.9 160.9 33.9
XCML88N 71* ‐100 1" 18.7 15.9 73.7 198.4 39.6
XCML88 88 ‐40 1" 18.7 15.9 73.7 198.4 39.6
XCML88E 88 ‐40 1" 18.7 15.9 73.7 198.4 39.6
XCML118N 94* ‐100 1 1/2" 21.1 19.5 67.1 390.1 67.9
XCML118 118 ‐40 1 1/2" 21.1 19.5 67.1 390.1 67.9
XCML118E 118 ‐40 1 1/2" 21.1 19.5 67.1 390.1 67.9
XCML147N 118* ‐100 1 1/2" 21.1 19.5 75.0 396.7 79.1
XCML147 147 ‐40 1 1/2" 21.1 19.5 75.0 396.7 79.1
XCML147E 147 ‐40 1 1/2" 21.1 19.5 75.0 396.7 79.1
XCML177N 142* ‐100 1 1/2" 21.1 19.5 75.0 414.4 79.1
XCML177 177 ‐40 1 1/2" 21.1 19.5 75.0 414.4 79.1
XCML177E 177 ‐40 1 1/2" 21.1 19.5 75.0 414.4 79.1
* Flows are derated due to ‐100F Option
Capacity on all models is based on 100⁰F, 100 psig. XCML Ship Loose Filters
Maximum allowable inlet temperature is 120⁰F Dryer Model Prefilter Post Filter
ambient XCML3 XCHE18FD XCGP18FD
Maximum ambient temperature 115°F XCML9 XCHE18FD XCGP18FD
Minimum inlet pressure 60 psig XCML15 XCHE18FD XCGP18FD
Maximum inlet pressure 200 psig. XCML24 XCHE24FD XCGP24FD
Cycle time for ‐40⁰F is 10 min. / 5 min. each vessel. XCML32 XCHE44FD XCGP44FD
Inlet/Outlet filters H/G grade supplied loose with fittings XCML41 XCHE44FD XCGP44FD
F.O.B. West Chester, PA XCML59 XCHE88FD XCGP88FD
XCML88 XCHE88FD XCGP88FD
Note: All dryers come standard with ship loose filtration on XCML118 XCHE135FD XCGP135FD
all models. XCML147 XCHE235FD XCGP235FD
XCML177 XCHE235FD XCGP235FD
62
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Desiccant Dryers ‐ Single Tower
CDS Series (5 ‐ 30 SCFM) ‐ Single Tower
Capacity @ 100 psi Dimensions Weight
Model List Price (SCFM) HxWxD In/Out (lbs)
CDS5 $312.00 5 13x4x4 ¼” 13
CDS10 $374.00 10 12x4x4 ¼” 12
CDS20 $448.00 20 20x4x4 ½" 20
CDS30 $504.00 30 28x4x4 ½” 28
CDS Series (5 ‐ 30 SCFM) ‐ Single Tower with Grade E Pre‐Filter
Capacity @ 100 psi Dimensions Weight
Model List Price (SCFM) HxWxD In/Out (lbs)
CDS5F $788.00 5 13x8x4 ¼” 13
CDS10F $858.00 10 12x8x4 ¼” 12
CDS20F $933.00 20 20x8x4 ½” 20
CDS30F $1,069.00 30 28x8x4 ½” 28
CDS Series (5 ‐ 30 SCFM) ‐ Replacement Elements and Desiccant
CDS05F – CDS20F includes CDS dryer, CFL Series Grade E Filter Model CFL20EDP.
CDS30F includes CDS dryer, CFL Series Grade E Model CFL35EDP.
Includes mounting bracket, Part Number C23433101, on dryer and modular connecting kit, Part Number C23428001.
Each replacement Silica Gel Desiccant kit is good for two charges in each CDS Series dryer.
63
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Desiccant Dryers
CDHM Series (3 ‐ 50 SCFM)
Configuration: CDHM99A
Flow Voltage Performance Options
CDHM3 1 = 115/1/50-60 1 = Standard B = Dryer/Filter 3-Valve By-Pass Piping Kit (order filters separately)
CDHM6 (shipped loose)
2 = 230/1/50-60 2 = Non-Standard
CDHM9
CDHM12 F = Filter Kit (5mm & 0.01 mm prefilters, 1 mm afterfilter) (shipped loose,
CDHM16 with wall mounting brackets)
CDHM25 H = High Humidity Alarm Panel with Local Light and Dry Contacts
CDHM35 (shipped loose for remote mounting)
* Flow is rated at 100 psig, 100F inlet air temperature for a -40F pdp dryer.
CDHM Series Options
Voltage X
230/1/60- Explosion Proof
Model # 115/1/60 50 Control Box
CDHM3 STD N/C $3,272
CDHM6 STD N/C $3,272
CDHM9 STD N/C $3,272
CDHM12 STD N/C $3,272
CDHM16 STD N/C $4,417
CDHM25 STD N/C $4,417
CDHM35 STD N/C $4,417
CDHM50 STD N/C $4,417
N/C = No Charge
64
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CDHM Recommended Shipped Loose Options
Dryer/Filter Filter High Humidity Moisture Tower Pressure Floor
Model # 3-Valve By-Pass Kit Alarm Panel Indicator Gauges Stand
P/N List P/N List P/N List P/N List P/N List P/N List
CDHM3 CBPIPE $322.92 CDF-12 $814.35 CHHUMAL $2,111.99 CMIND $101.21 CTPRESS $143.82 CFSTAND $835.11
CDHM6 CBPIPE $322.92 CDF-12 $814.35 CHHUMAL $2,111.99 CMIND $101.21 CTPRESS $143.82 CFSTAND $835.11
CDHM9 CBPIPE $322.92 CDF-12 $814.35 CHHUMAL $2,111.99 CMIND $101.21 CTPRESS $143.82 CFSTAND $835.11
CDHM12 CBPIPE $322.92 CDF-12 $814.35 CHHUMAL $2,111.99 CMIND $101.21 CTPRESS $143.82 CFSTAND $835.11
CDHM16 CBPIPE1 $449.64 CDF-25 $733.48 CHHUMAL $2,111.99 CMIND1 $101.21 CTPRESS1 $143.82 CFSTAND1 $835.11
CDHM25 CBPIPE1 $449.64 CDF-25 $733.48 CHHUMAL $2,111.99 CMIND1 $101.21 CTPRESS1 $143.82 CFSTAND1 $835.11
CDHM35 CBPIPE1 $449.64 CDF-50 $807.24 CHHUMAL $2,111.99 CMIND1 $101.21 CTPRESS1 $143.82 CFSTAND1 $835.11
CDHM50 CBPIPE1 $449.64 CDF-50 $807.24 CHHUMAL $2,111.99 CMIND1 $101.21 CTPRESS1 $143.82 CFSTAND1 $835.11
Notes:
All options listed are shipped loose to be installed by the customer.
Dryer/filter 3-valve by-pass piping kit does not include filters.
Filter kit includes 5 micron and 0.01 micron prefilters and a 1.0 micron afterfilter.
High humidity alarm panel includes a local alarm light and dry contact.
65
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Desiccant Replacement
Activated Alumina
Part Number List Price Description Model No Bead Size Package Size (lbs.)
C3146257 $222.85 50
C3146259 $739.74 150
C3146260 $1,340.20 AA-4 1/8” 350
C3146261 $6,191.87 2000
C3154742 $6,233.70 2,100*
C3146262 $202.66 50
C3146263 $741.59 Industrial Grade 150
AA-25 1/4”
C3146264 $1,316.06 350
C3146265 $5,877.87 2000
C3146266 $216.68 50
C3146267 $741.59 150
AA-60 3/16”
C3146268 $1,426.66 350
C3146269 $6,937.13 2000
Silica Gel
Part Number List Price Description Model No Bead Size Package Size (lbs.)
C3146275 $1,142.16 30
C3146276 $1,360.23 Granular 150
C3146277 $3,029.04 SG-3 3-8M 330
C3146278 $917.79 30
3 x 8M
C3146279 $4,213.41 SG-9 150
C3146280 $402.17 34
C3146281 $1,121.11 100
Beaded
C3146282 $1,661.11 150
C3146283 $3,148.52 SG-12 .145” 330
C3146284 $2,131.64 150
Water Resistant
C3146285 $3,842.31 SG-10 287
C3146286 $152.87 Color Change SG-37 6
Molecular Sieve
Part Number List Price Description Model No Bead Size Package Size (lbs.)
C3146290 CF 3A Pellet MS-39 1/16” 300
C3146291 $754.05 30
C3146292 $981.38 70
C3146293 $3,891.70 140
4A
C3146294 $6,949.28 MS-4 4-8M 300
C3146295 $1,243.81 50
C3146296 $4,230.41 MS-5 4-12M 300
C3146298 $734.44 30
13X
C3146299 $6,877.33 MS-76 8-12M 275
C3146529 $1,156.56 30
C3146302 $1,524.73 13X Pellet 100
C3146303 $3,875.22 MS-17 1/8” 275
66
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Desiccant Replacement
Bed Support
Package
Part Number List Price Description Model No Bead Size Size (lbs.)
C3146308 $211.44 30
TS-4 1/8”
C3146309 $1,889.55 325
C3146310 $211.44 30
C3146311 $385.14 TS-25 1/4” 60
C3146312 $1,567.98 270
Beads
C3146313 $1,567.98 TS-38 3/8” 270
C3146314 $387.02 60
TS-50 1/2”
C3146315 $1,575.56 270
C3146316 $385.14 60
TS-100 1”
C3146317 $1,567.98 270
Activated Carbon
Package
Part Number List Price Description Model No Bead Size Size (lbs.)
C3146318 $403.71 12
C3146319 $644.44 20
AC-816 8-16M
C3146320 $2,287.16 Carbon 100
C3146321 $3,713.69 200
C3146322 $37.36 AC-46 4-6M 1
Deliquescent
Package
Part Number List Price Description Model No Bead Size Size (lbs.)
C3146325 $122.71 Deliquescent FD2 1”x3/4” 50
67
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Membrane Dryers
CMD Series
Model Options
CMD1 F1 = One Grade E High Efficiency Pre-Filter
CMD2
CMD3 F2 = Two Pre-Filters, One Grade C Air Line and One Grade F
CMD4 Maximum High Efficiency
CMD5
CMD6
CMD7
CMD8
CMD9
Maximum operating pressure: Membrane dryer only: 200 psig (21.2 kg/cm2).
Maximum inlet temperature: 150F (66C).
1) Unit price is for membrane dryer alone. DO NOT SELL WITHOUT A PREFILTER
2) Flow capacity at 100 psig (7 kg/cm2) and 100F (38C) saturated inlet. Flow capacities are established in accordance with CAGI
(Compressed Air and Gas Institute) Standard ADF 700: Membrane Compressed Air Dryers – Methods for testing and rating.
3) NPT or BSP – for BSP add B to the model number
3‐Year Warranty
The standard one-year warranty is extended to three years when the dryer is installed with an optional prefilter package. To keep the
warranty in effect, elements must be replaced at six-month intervals and the drain mechanism yearly.
See next page for maintenance kits and optional pre-filter packages.
68
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CMD Options and Replacement Bundles:
Option F1: One Filter Option F2: Two Filters Replacement Bundles
Model List Price Model List Price Model List Price
CMD1 $468 CMD1 $1,531 CMDB1 $909.85
CMD2 $470 CMD2 $1,543 CMDB2 $1,098.71
CMD3 $467 CMD3 $1,571 CMDB3 $1,522.15
CMD4 $487 CMD4 $1,581 CMDB4 $1,663.81
CMD5 $474 CMD5 $1,581 CMDB5 $2,083.87
CMD6 $732 CMD6 $2,526 CMDB6 $2,972.80
CMD7 $801 CMD7 $2,596 CMDB7 $5,483.44
CMD8 $819 CMD8 $2,863 CMDB8 $9,000.99
CMD9 $1,030 CMD9 $3,560 CMDB9 $10,708.64
Pre-filter Packages:
Pre-filter packages include mounting brackets and interconnecting piping. Pre-filters include auto drain and differential pressure
indicator.
One pre-filter package: For normal operation – contains a Grade E High Efficiency Oil Removal Filter.
Maximum Inlet Liquid Content: 1000 ppm. Maximum Outlet Oil Content: 0.008 ppm.
Two pre-filter package: For highly contaminated systems or applications where the highest level of purity is
required – contains a Grade C Air Line Filter and Grade F Maximum Efficiency Oil Removal Filter.
Grade C: Maximum Inlet Liquid Content: 2000 ppm. Maximum Outlet Oil Content: 1 ppm.
Grade F: Maximum Inlet Liquid Content: 100 ppm. Maximum Outlet Oil Content: 0.0008 ppm.
69
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CMD Maintenance Kits:
One Filter:
Maintenance
Model Kit # Kit Contents List Price
CMD1 CMDMK01
CMD2 CMDMK01
(1) Auto Drain, (2) CAF20EE, (1) O-Ring $207.57
CMD3 CMDMK01
CMD4 CMDMK01
CMD5 CMDMK02
CMD6 CMDMK02
(1) Auto Drain, (2) CAF170EE, (1) O-Ring $374.52
CMD7 CMDMK02
CMD8 CMDMK02
CMD9 CMDMK03 (1) Auto Drain, (2) CAF170EE, (1) O-Ring $853.93
Two Filters:
Maintenance
Model Kit # Kit Content List Price
CMD1 CMDMK04
CMD2 CMDMK04
(2) Auto Drains, (2) CAF20FE, (2) CAF20CE, (2) O-Rings $389.73
CMD3 CMDMK04
CMD4 CMDMK04
CMD5 CMDMK05
CMD6 CMDMK05
(2) Auto Drains, (2) CAF170FE, (2) CAF170CE, (2) O-Rings $1,257.18
CMD7 CMDMK05
CMD8 CMDMK05
CMD9 CMDMK06 (2) Auto Drains, (2) CAF170FE, (2) CAF170CS, (2) O-Rings $1,519.68
70
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters
XC Series (18 ‐ 3,600 SCFM)
Housing
Model (Grade) Flow (scfm) Grades Drains
SCFM
XC18 18 FD = Float Drain
XC24 24 GP = General Purpose (0.1 ppm) M = Manual Drain
XC44 44 HE = High Efficiency Oil Removal (0.01 ppm) F = No Drain (1800‐13,200 SCFM)
XC65 65 AC = Activated Carbon (<0.003 ppm)
XC88 88 DP = General Purpose Dust Filtration (1 micron) Blank = No Drain (Mist Eliminators
XC112 112 are standard with no drain)
XC135 135
XC235 235
XC288 288
XC353 353
XC471 471
XC589 589
XC706 706
XC918 918
XC1077 1077
XC1354 1354
XC1589 1589
XC1800 1800
XC2400 2400
XC3000 3000
XC3600 3600
Operating Limitations:
Maximum Operating Pressure: 250 psig (17 bar g)
Maximum Recommended Operating Temperature:
Grades GP/HE/DP: 176◦F (80◦C)
Grade AC: 86◦F (30◦C)
Minimum Recommended Operating Temperature:
All Graded: 34◦F (1◦C)
71
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XC Series Filtration Specifications:
Dimensions
Pipe Size Flow Weight
Filter Model A B C D
Number in scfm in in in in lb
XC18 3/8” 18 2.99 6.81 0.63 2.09 1.2
XC24 1/2” 24 2.99 6.81 0.63 2.09 1.2
XC44 3/4” 44 3.86 8.98 0.87 2.09 2.4
XC65 3/4” 65 3.86 8.98 0.87 2.09 2.4
XC88 1” 88 5.08 10.51 1.26 2.09 4.5
XC112 1” 112 5.08 10.51 1.26 2.09 4.5
XC135 1” 135 5.08 10.51 1.26 2.09 4.5
XC235 1 1/2” 235 5.08 14.06 1.26 2.09 5.2
XC288 1 1/2” 288 5.08 14.06 1.26 2.09 5.2
XC353 2” 353 6.69 18.35 1.5 2.09 11.5
XC471 2” 471 6.69 18.35 1.5 2.09 11.5
XC589 2” 589 6.69 18.35 1.5 2.09 11.6
XC706 3” 706 8.07 21.42 2.17 2.09 20.5
XC918 3” 918 8.07 25.35 2.17 2.09 23.6
XC1077 3” 1077 8.07 25.35 2.17 2.09 23.6
XC1354 3” 1354 8.07 34.49 2.17 2.09 30.2
XC1589 3” 1589 8.07 34.49 2.17 2.09 30.2
PLEASE NOTE THE BELOW MODELS REQUIRE A 150 LB FLANGE
XC1800 4 FLG 1800 37.00 19.00 9.25 ‐ 168
XC2400 4 FLG 2400 37.00 19.00 9.25 ‐ 170
XC3000 4 FLG 3000 37.00 22.00 10.37 ‐ 208
XC3600 6 FLG 3600 42.50 27.50 12.63 ‐ 210
*Dimensions above are for all filter grades.
72
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XC Series Grade GP ‐ General Purpose (0.1 ppm)
Replacement
Model List Price Element List Price Grade GP: General Purpose Protection
XCGP18FD $ 207 XCGP18E $ 63
XCGP24FD $ 256 XCGP24E $ 63
XCGP44FD $ 338 XCGP44E $ 70 Particle removal down to 1 micron including coalesced liquid,
XCGP65FD $ 408 XCGP65E $ 71
water and oil, providing a maximum remaining oil aerosol content
XCGP88FD $ 449 XCGP88E $ 87
of 0.1 ppm (0.1 mg/m^3) @ 60◦F (21◦C)
XCGP112FD $ 518 XCGP112E $ 87
XCGP135FD $ 553 XCGP135E $ 91
XCGP235FD $ 857 XCGP235E $ 105
XCGP288FD $ 913 XCGP288E $ 105
XCGP353FD $ 1,002 XCGP353E $ 141
XCGP471FD $ 1,299 XCGP471E $ 149
XCGP589FD $ 1,630 XCGP589E $ 155
XCGP706FD $ 1,879 XCGP706E $ 180
XCGP918FD $ 2,294 XCGP918E $ 208
XCGP1077FD $ 2,639 XCGP1077E $ 208
XCGP1354FD $ 3,205 XCGP1354E $ 271
XCGP1589FD $ 3,454 XCGP1589E $ 271
XCGP1800F $ 5,035 XCGP600E* $ 150
XCGP2400F $ 6,495 XCGP600E* $ 150
XCGP3000F $ 7,641 XCGP600E* $ 150
XCGP3600F $ 8,767 XCGP600E* $ 150
Standard: Dual Indicator to show differential pressure drop and economical operating efficiency
Standard on Grade GP: Float Drain on 1589 SCFM and below
Standard: Dual Indicator to show differential pressure drop and economical operating efficiency
Standard on Grade GP: Float Drain on 1589 SCFM and below
*See Element Quantity Table below
Replacement Element Qty Needed to Replace Per
Filter Model
Maintenance
XCGP1800F XCGP600E 3
XCGP2400F XCGP600E 4
XCGP3000F XCGP600E 5
XCGP3600F XCGP600E 6
XCGP4200F XCGP600E 7
XCGP4800F XCGP600E 8
XCGP6000F XCGP600E 10
XCGP9000F XCGP600E 15
XCGP13200F XCGP600E 22
73
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XC Series Grade HE ‐ High Efficiency Oil Removal (0.01 ppm)
Replacement
Model List Price Element List Price Grade HE: High Efficiency Oil Removal Filtration
XCHE18FD $ 207 XCHE18E $ 63
XCHE24FD $ 256 XCHE24E $ 63
XCHE44FD $ 338 XCHE44E $ 70 Particle removal down to 0.01 micron including water and oil
XCHE65FD $ 408 XCHE65E $ 71
aerosols, providing a maximum remaining oil aerosol content of
XCHE88FD $ 449 XCHE88E $ 86
0.01 ppm (0.01 mg/m^3) @ 60◦F (21◦C)
XCHE112FD $ 518 XCHE112E $ 86
XCHE135FD $ 553 XCHE135E $ 89
XCHE235FD $ 857 XCHE235E $ 105
XCHE288FD $ 913 XCHE288E $ 105
XCHE353FD $ 1,002 XCHE353E $ 141
XCHE471FD $ 1,299 XCHE471E $ 149
XCHE589FD $ 1,630 XCHE589E $ 155
XCHE706FD $ 1,879 XCHE706E $ 179
XCHE918FD $ 2,294 XCHE918E $ 207
XCHE1077FD $ 2,639 XCHE1077E $ 207
XCHE1354FD $ 3,205 XCHE1354E $ 270
XCHE1589FD $ 3,454 XCHE1589E $ 270
XCHE1800F $ 5,035 XCHE600E* $ 150
XCHE2400F $ 6,495 XCHE600E* $ 150
XCHE3000F $ 7,641 XCHE600E* $ 150
XCHE3600F $ 8,767 XCHE600E* $ 150
Standard: Dual Indicator to show differential pressure drop and economical operating efficiency
Standard on Grade HE: Float Drain on 1589 SCFM and below
Standard: Dual Indicator to show differential pressure drop and economical operating efficiency
Standard on Grade HE: Float Drain on 1589 SCFM and below
*See Element Quantity Table below
Qty Needed to Replace Per
Filter Model Replacement Element
Maintenance
XCHE1800F XCHE600E 3
XCHE2400F XCHE600E 4
XCHE3000F XCHE600E 5
XCHE3600F XCHE600E 6
XCHE4200F XCHE600E 7
XCHE4800F XCHE600E 8
XCHE6000F XCHE600E 10
XCHE9000F XCHE600E 15
XCHE13200F XCHE600E 22
74
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XC Series Grade AC ‐ Activated Carbon (<0.003 ppm)
Replacement
Model List Price Element List Price Grade AC: Activated Carbon Filtration
XCAC18M $ 207 XCAC18E $ 65
XCAC24M $ 256 XCAC24E $ 65
XCAC44M $ 338 XCAC44E $ 73 Oil vapor and hydrocarbon odor removal, providing a maximum
XCAC65M $ 408 XCAC65E $ 75
remaining oil content of <0.003 ppm (<0.003 mg/m^3) @ 60◦F
XCAC88M $ 449 XCAC88E $ 92
(21◦C)
XCAC112M $ 518 XCAC112E $ 92
XCAC135M $ 553 XCAC135E $ 96
XCAC235M $ 857 XCAC235E $ 110
XCAC288M $ 913 XCAC288E $ 110
XCAC353M $ 1,002 XCAC353E $ 144
XCAC471M $ 1,299 XCAC471E $ 152
XCAC589M $ 1,630 XCAC589E $ 158
XCAC706M $ 1,879 XCAC706E $ 180
XCAC918M $ 2,294 XCAC918E $ 212
XCAC1077M $ 2,639 XCAC1077E $ 212
XCAC1354M $ 3,205 XCAC1354E $ 267
XCAC1589M $ 3,454 XCAC1589E $ 267
XCAC1800F $ 4,938 XCAC600E* $ 153
XCAC2400F $ 6,495 XCAC600E* $ 153
XCAC3000F $ 7,641 XCAC600E* $ 153
XCAC3600F $ 8,767 XCAC600E* $ 153
Standard: Dual Indicator to show differential pressure drop and economical operating efficiency
Standard on Grade AC: Manual Drain on 1589 SCFM and below
Standard: Dual Indicator to show differential pressure drop and economical operating efficiency
Standard on Grade AC: Manual Drain on 1589 SCFM and below
*See Element Quantity Table below
Replacement Element Qty Needed to Replace Per
Filter Model
Maintenance
XCAC1800F XCAC600E 3
XCAC2400F XCAC600E 4
XCAC3000F XCAC600E 5
XCAC3600F XCAC600E 6
XCAC4200F XCAC600E 7
XCAC4800F XCAC600E 8
XCAC6000F XCAC600E 10
XCAC9000F XCAC600E 15
XCAC13200F XCAC600E 22
75
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XC Series Grade DP ‐ General Purpose Dust Filtration (1 micron)
Replacement
Model List Price Element List Price Grade DP: General Purpose Dust Filtration
XCDP18M $ 207 XCDP18E $ 62
XCDP24M $ 256 XCDP24E $ 62
XCDP44M $ 338 XCDP44E $ 68
XCDP65M $ 408 XCDP65E $ 68
Dust particle removal down to 1 micron
XCDP88M $ 449 XCDP88E $ 79
XCDP112M $ 518 XCDP112E $ 79
XCDP135M $ 553 XCDP135E $ 82
XCDP235M $ 857 XCDP235E $ 93
XCDP288M $ 913 XCDP288E $ 93
XCDP353M $ 1,002 XCDP353E $ 120
XCDP471M $ 1,299 XCDP471E $ 126
XCDP589M $ 1,630 XCDP589E $ 129
XCDP706M $ 1,879 XCDP706E $ 146
XCDP918M $ 2,294 XCDP918E $ 166
XCDP1077M $ 2,639 XCDP1077E $ 166
XCDP1354M $ 3,205 XCDP1354E $ 208
XCDP1589M $ 3,454 XCDP1589E $ 208
XCDP1800F $ 5,035 XCDP600E* $ 129
XCDP2400F $ 6,495 XCDP600E* $ 129
XCDP3000F $ 7,641 XCDP600E* $ 129
XCDP3600F $ 8,767 XCDP600E* $ 129
Standard: Dual Indicator to show differential pressure drop and economical operating efficiency
Standard on Grade DP: Manual Drain on 1589 SCFM and below
Standard: Dual Indicator to show differential pressure drop and economical operating efficiency
Standard on Grade DP: Manual Drain on 1589 SCFM and below
*See Element Quantity Table below
Qty Needed to Replace Per
Filter Model Replacement Element
Maintenance
XCDP1800F XCDP600E 3
XCDP2400F XCDP600E 4
XCDP3000F XCDP600E 5
XCDP3600F XCDP600E 6
XCDP4200F XCDP600E 7
XCDP4800F XCDP600E 8
XCDP6000F XCDP600E 10
XCDP9000F XCDP600E 15
XCDP13200F XCDP600E 22
76
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
XC Series Grade GP HT ‐ General Purpose High Temperature Filtration
Replacement
Grade GP: General Purpose High Temperature Filtration
Model List Price Element List Price
XCGP1800FHT $ 5,463 XCGP600E‐HT $ 167
XCGP2400FHT $ 7,474 XCGP600E‐HT $ 167
Particle removal down to 1 micron
XCGP3000FHT $ 8,812 XCGP600E‐HT $ 167
XCGP3600FHT $ 9,360 XCGP600E‐HT $ 167
Maximum Operating Temp: 450◦F
Standard: Dual Indicator to show differential pressure drop and economical operating efficiency
No drain on models 1800 cfm and above
*See Element Quantity Table below
Qty Needed to Replace Per
Filter Model Replacement Element
Maintenance
XCGP1800FHT XCGP600E‐HT 3
XCGP2400FHT XCGP600E‐HT 4
XCGP3000FHT XCGP600E‐HT 5
XCGP3600FHT XCGP600E‐HT 6
XCGP4200FHT XCGP600E‐HT 7
XCGP4800FHT XCGP600E‐HT 8
XCGP6000FHT XCGP600E‐HT 10
XCGP9000FHT XCGP600E‐HT 15
XCGP13200FHT XCGP600E‐HT 22
XCME Series ‐ Mist Eliminator
Replacement
Benefits
Model List Price Element List Price
XCME125 $ 4,627 23442072 $ 1,835
XCME250 $ 5,041 23442080 $ 1,704 High‐efficiency particulate filtration to 0.5 ppm
XCME500 $ 6,041 23442098 $ 2,095 > 3 microns at 100%
XCME800 $ 7,660 23442106 $ 2,747 0.1 to 3 microns at 99.98%
XCME1100 $ 8,909 23442114 $ 3,236
XCME1500F $ 10,685 23442122 $ 2,945
XCME1900F $ 13,761 23442130 $ 3,772
Effective oil removal: 2 ppm in = 0.01 ppm out/ 10 ppm in = 0.05
XCME2400F $ 14,836 23442148 $ 4,854
ppm out
XCME3000F $ 17,203 23442155 $ 4,404
77
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters / Separators
CFF Series Replacement Elements Grade A, B, C and D
Repl. Repl. Repl. Repl.
Housing List Price List Price List Price List Price
Flow Grade A Element Grade B
Element Grade C
Element Grade D Element
Type Each Each Each Each
Qty Req'd Qty Req'd Qty Req'd Qty Req'd
20 C20AE 1 $54.85 C20BE 1 $78.70 C20CE 1 $54.85 C20DE 1 $54.85
35 C35AE 1 $62.43 C35BE 1 $86.60 C35CE 1 $66.74 C35DE 1 $66.74
60 C60AE 1 $80.47 C60BE 1 $125.94 C60CE 1 $97.08 C60DE 1 $97.08
Modular Housing
CFF Series Replacement Elements Grade E, F and G
Repl. Repl. Repl.
Housing List Price List Price List Price
Flow Grade E Element Grade FElement Grade G
Element
Type Each Each Each
Qty Req'd Qty Req'd Qty Req'd
20 C20EE 1 $72.70 C20FE 1 $71.46 C20GE 1 $95.62
35 C35EE 1 $80.47 C35FE 1 $83.34 C35GE 1 $106.08
60 C60EE 1 $110.79 C60FE 1 $110.79 C60GE 1 $133.53
Modular Housing
CFF Series Filters have been replaced by the CFL Series Filters
78
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters / Separators ‐ In Line
CFL Series (20 ‐ 21,250 SCFM)
Configuration: CFL99A
Housing Housing (1) Grade (2) Connections (3) Features (4)
Type Number Flow (scfm) Filters/Separator Standard Size Optional Sizes
A= Mechanical Separator 13 = 1/2” NPTF A= Internal Automatic Drain
20 20 11 = 3/8” NPTF 37 = 3/8” BSP
B= Separator/Filter 39 = 1/2” BSP E= Electronic Demand Drain
(3 micron, 5 ppm) 11 = 3/8” NPTF
35 35
13 = 1/2” NPTF 37 = 3/8” BSP X= Manual Drain
60 60
C= Air Line filter 39 = 1/2” BSP
(1 micron, 1 ppm) 17 = 1” NPTF N= No Drain
100 100 15 = 3/4” NPTF 41 = 3/4” BSP
Modular Housing
U= ASME “U” Stamped Vessel
625 625
1000 1000
27 = 3” NPTM 53 = DN 80 Flange
1250 1250 Y = No ASME Coding
1875 1875
Pressure Vessel
2500 2500
29 = 4” ANSI Flange 55 = DN 100 Flange
3125 3125
5000 5000
6875 6875 31 = 6” ANSI Flange 57 = DN 150 Flange
8750 8750
11875 11875
33 = 8” ANSI Flange 59 = DN 200 Flange
16250 16250
Example: CFL20A11A is a configurated filter with 20 scfm flow, grade A mechanical separator, 3/8” NPTF connection, and internal
automatic drain.
79
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters / Separators
CFL Series Grade A ‐ Mechanical Separator
List Price In/Out Dimensions Weight F.O.B.
Grade A Model Flow (1) Connections HxW (lbs) Point
CFL20A 20 $275 3/8” & 1/2" NPTF 8x4 4.2 N
CFL35A 35 $299 3/8” & 1/2" NPTF 11x4 8.1 N
CFL60A 60 $387 3/8” & 1/2" NPTF 13x4 8.5 N
Modular Housings
Maximum operating pressure:
Models 20 through 780 with manual drain: 300 psig
Models 20 through 170 with A = internal automatic drain or L = liquid level indicator, 250 psig
Models 625P, 1000 and larger: 225 psig
Maximum inlet temperature: 150ºF (66ºC)
(1) Price includes element installed.
(8) Housings are supplied with manual drain. For automatic draining, see Drain section.
A = Internal automatic drain installed on models 20‐170.
80
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade A Filter Options
Option Suffix Description:
A Internal automatic drain is pneumatically actuated for reliable discharges of collected liquids.
E Electronic Demand Drain
P Differential pressure slide indicator changes color when filter element requires replacement.
G Differential pressure gauge provides a visual indication when filter element requires replacement.
L Liquid level indicator allows monitoring of liquid level inside filter housing.
S Corrosion proof stainless steel cores for added structural integrity.
U For U‐ ASME stamp of inspection. Standard for Models 1000‐21250 only.
SEE NEXT PAGE FOR REPLACEMENT ELEMENTS
Grade A Model # A (2) E (10) P G L (5) S U (9)
CFL20A STD $537 N/A N/A $33 N/A N/A
CFL35A STD $537 N/A N/A $33 N/A N/A
CFL60A STD $537 N/A N/A $33 N/A N/A
Modular Housings
81
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade A Replacement Elements
Repl.
Repl. Element List Price
Grade A Model #
Element Qty. Each
Req’d
CFL20A CF20AE 1 $54.85
CFL35A CF35AE 1 $56.61
CFL60A CF60AE 1 $82.09
Modular Housings
Replacement elements, F.O.B. Shipping Point: Newport, NC, 28570
82
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters / Separators
CFL Series Grade B ‐ 3 micron, 5 ppm
Grade List Price In/Out Dimensions Weight F.O.B.
B Model Flow (1) Connections HxW (lbs) Point
CFL20BAP 20 $329 3/8” & 1/2" NPTF 8x4 4.2 N
CFL35BAP 35 $356 3/8” & 1/2" NPTF 11x4 8.1 N
CFL60BAP 60 $467 3/8” & 1/2" NPTF 13x4 8.5 N
Modular Housings
Maximum operating pressure:
Models with manual drain: 300 psig
Models with A = internal automatic drain or L = liquid level indicator: 250 psig
Model 625P: 300 psig
Models 1000 through 221250: 225 psig
Maximum inlet temperature: 150ºF (66ºC)
(1) Price includes element installed.
(8) Housings are supplied with manual drain. For automatic draining, see Drain section.
(10) Vessels supplied with plugged drain port. For automatic draining, see Drain section.
A = Internal automatic drain
P = Differential pressure slide
G = Differential pressure gauge
83
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade B Filter Options
Option Suffix Description:
A Internal automatic drain is pneumatically actuated for reliable discharges of collected liquids.
E Electronic Demand Drain
P Differential pressure slide indicator changes color when filter element requires replacement.
G Differential pressure gauge provides a visual indication when filter element requires replacement.
L Liquid level indicator allows monitoring of liquid level inside filter housing.
S Corrosion proof stainless steel cores for added structural integrity.
U For U‐ ASME stamp of inspection. Standard for Models 1000‐21250 only.
SEE NEXT PAGE FOR REPLACEMENT ELEMENTS AND SLEEVES
Grade A E P G L S U
Model #
B (2) (10) (3) (4) (5) (6) (9)
CFL20B STD $537 STD $93 $33 $35 N/A
CFL35B STD $537 STD $93 $33 $35 N/A
Modular Housings
84
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade B Replacement Elements
SEE NEXT PAGE FOR STAINLESS STEEL ELEMENTS AND SLEEVE REPLACEMENTS
Repl.
Grade Replacement List Price Replacement Repl. Element List Price
Model # Element Qty.
B Element Each Sleeve Qty. Req'd Each
Req'd
CFL20B CF20BE 1 $76.22 C20BEL 1 $37.84
CFL35B CF35BE 1 $85.16 C35BEL 1 $42.59
CFL60B CF60BE 1 $126.04 C60BEL 1 $62.35
Modular Housings
85
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade B Stainless Steel Element and Sleeve Replacements
Replacement
Grade Repl. List Price Replacement
Model # Stainless Steel List Price (Each)
B Qty Req'd (Each) Stainless Steel Sleeve
Element
CFL20B 1 C20BES $89.49 C20BEV $24.54
CFL35B 1 C35BES $101.78 C35BEV $33.57
CFL60B 1 C60BES $145.78 C60BEV $54.85
Modular Housings
Replacement elements and sleeves, F.O.B. Shipping Point: Newport, NC, 28570, or Ocala, FL, 34474
86
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters / Separators
CFL Series Grade C ‐ Air Line Filter (1 micron, 1 ppm)
Grade List Price In/Out Dimensions Weight F.O.B.
C Model Flow (1) Connections HxW (lbs) Point
CFL20CAP 20 $306 3/8” & 1/2" NPTF 8x4 4.2 N
CFL35CAP 35 $338 3/8” & 1/2" NPTF 11x4 8.1 N
CFL60CAP 60 $428 3/8” & 1/2" NPTF 13x4 8.5 N
Modular Housings
Maximum operating pressure:
Models with manual drain: 300 psig
Models with A = internal automatic drain or L = liquid level indicator, 250 psig
Models 1000 through 21250: 225 psig
Maximum inlet temperature: 150ºF (66ºC)
(1) Price includes element installed.
(8) Housings are supplied with manual drain. For automatic draining, see Drain section.
(10) Vessels supplied with plugged drain port. For automatic draining, see Drain section.
A = Internal automatic drain
P = Differential pressure slide
G = Differential pressure gauge
F.O.B. Shipping Points: N = Newport, NC, 28570; O = Ocala, FL, 34474
87
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade C Filter Options
Option Suffix Description:
A Internal automatic drain is pneumatically actuated for reliable discharges of collected liquids.
E Electronic Demand Drain
P Differential pressure slide indicator changes color when filter element requires replacement.
G Differential pressure gauge provides a visual indication when filter element requires replacement.
L Liquid level indicator allows monitoring of liquid level inside filter housing.
S Corrosion proof stainless steel cores for added structural integrity.
U For U‐ ASME stamp of inspection. Standard for Models 1000‐21250 only.
Grade A E P G L S U
Model #
C (2) (10) (3) (4) (5) (6) (9)
CFL20C STD $537 STD $90 $33 $35 N/A
CFL35C STD $537 STD $90 $33 $35 N/A
Modular Housings
88
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade C Replacement Elements
Replacement
Grade Replacement Repl. Qty List Price Repl. Qty List Price
Model # Stainless Steel
C Element Req'd Each Req'd Each
Element
CFL20C CF20CE 1 $51.96 C20CES 1 $135.21
CFL35C CF35CE 1 $63.51 C35CES 1 $158.78
CFL60C CF60CE 1 $93.81 C60CES 1 $218.31
Modular Housings
89
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters / Separators
CFL Series Grade D ‐ Dry Particulate Filter (1 micron after‐filter for heatless desiccant dryers)
Grade List Price In/Out Dimensions Weight F.O.B.
D Model Flow (1) Connections HxW (lbs) Point
CFL20DP 20 $212 3/8” & 1/2" NPTF 8x4 4.2 N
CFL35DP 35 $236 3/8” & 1/2" NPTF 11x4 8.1 N
CFL60DP 60 $334 3/8” & 1/2" NPTF 13x4 8.5 N
Modular Housings
Maximum operating pressure:
Models with manual drain: 300 psig
Models 485 through 625P: 300 psig;
Models 1000 through 21250: 225 psig.
Maximum inlet temperature: 150ºF (66ºC)
(1) Price includes element installed.
(10) Vessels supplied with plugged drain port.
P = Differential pressure slide
G = Differential pressure gauge
90
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade D Filter Options
Option Suffix Description:
A Internal automatic drain is pneumatically actuated for reliable discharges of collected liquids.
E Electronic Demand Drain
P Differential pressure slide indicator changes color when filter element requires replacement.
G Differential pressure gauge provides a visual indication when filter element requires replacement.
L Liquid level indicator allows monitoring of liquid level inside filter housing.
S Corrosion proof stainless steel cores for added structural integrity.
U For U‐ ASME stamp of inspection. Standard for Models 1000‐21250 only.
A E P G L S U
Grade D Model #
(2) (10) (3) (4) (5) (6) (9)
CFL20D $89 N/A STD $93 N/A $35 N/A
CFL35D $89 N/A STD $93 N/A $35 N/A
Modular Housings
91
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade D Replacement Elements
Replacement
Grade Replacement Repl. Qty List Price Repl. Qty List Price
Model # Stainless Steel
D Element Req'd Each Req'd Each
Element
CFL20D CF20DE 1 $51.96 C20DES 1 $135.21
CFL35D CF35DE 1 $64.47 C35DES 1 $153.41
CFL60D CF60DE 1 $93.81 C60DES 1 $210.62
Modular Housings
92
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters / Separators
CFL Series Grade E ‐ High Efficiency Oil Removal Filter (.01 micron, .008 ppm)
Grade List Price In/Out Dimensions Weight F.O.B.
E Model Flow (1) Connections HxW (lbs) Point
CFL20EAP 20 $311 3/8” & 1/2" NPTF 8x4 4.2 N
CFL35EAP 35 $343 3/8” & 1/2" NPTF 11x4 8.1 N
CFL60EAP 60 $444 3/8” & 1/2" NPTF 13x4 8.5 N
Modular Housings
Maximum operating pressure:
Models with manual drain: 300 psig
Models with A = internal automatic drain or L = liquid level indicator, 250 psig
Models 1000 through 21250: 225 psig
Maximum inlet temperature: 150ºF (66ºC)
(1) Price includes element installed.
(10) Vessels supplied with plugged drain port. For automatic draining, see Drain section.
A = Internal automatic drain
P = Differential pressure slide
G = Differential pressure gauge
93
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade E Filter Options
Option Suffix Description:
A Internal automatic drain is pneumatically actuated for reliable discharges of collected liquids.
E Electronic Demand Drain
P Differential pressure slide indicator changes color when filter element requires replacement.
G Differential pressure gauge provides a visual indication when filter element requires replacement.
L Liquid level indicator allows monitoring of liquid level inside filter housing.
S Corrosion proof stainless steel cores for added structural integrity.
U For U‐ ASME stamp of inspection. Standard for Models 1000‐21250 only.
Grade A E P G L S U
Model #
E (2) (10) (3) (4) (5) (6) (9)
CFL20E STD $537 STD $93 $33 $35 N/A
CFL35E STD $537 STD $93 $33 $35 N/A
Modular Housings
94
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade E Replacement Elements
Replacement
Grade Replacement Repl. Qty List Price Repl. Qty List Price
Model # Stainless Steel
E Element Req'd Each Req'd Each
Element
CFL20E CF20EE 1 $66.39 C20EES 1 $153.41
CFL35E CF35EE 1 $77.66 C35EES 1 $169.67
CFL60E CF60EE 1 $106.98 C60EES 1 $223.43
Modular Housings
95
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters / Separators
CFL Series Grade F ‐ Maximum High Efficiency Oil Removal Filter (.01 micron, .0008 ppm)
Grade List Price In/Out Dimensions Weight F.O.B.
F Model Flow (1) Connections HxW (lbs) Point
CFL20FAP 20 $322 3/8” & 1/2" NPTF 8x4 4.2 N
CFL35FAP 35 $348 3/8” & 1/2" NPTF 11x4 8.1 N
CFL60FAP 60 $446 3/8” & 1/2" NPTF 13x4 8.5 N
Modular Housings
Maximum operating pressure:
Models with manual drain: 300 psig
Models with A = internal automatic drain or L = liquid level indicator, 250 psig
Model 625P: 300 psig;
Models 1000 through 21250: 225 psig.
Maximum inlet temperature: 150ºF (66ºC)
(1) Price includes element installed.
(10) Vessels supplied with plugged drain port. For automatic draining, see Drain section.
A = Internal automatic drain
P = Differential pressure slide
G = Differential pressure gauge
96
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade F Filter Options
Option Suffix Description:
A Internal automatic drain is pneumatically actuated for reliable discharges of collected liquids.
E Electronic Demand Drain
P Differential pressure slide indicator changes color when filter element requires replacement.
G Differential pressure gauge provides a visual indication when filter element requires replacement.
L Liquid level indicator allows monitoring of liquid level inside filter housing.
S Corrosion proof stainless steel cores for added structural integrity.
U For U‐ ASME stamp of inspection. Standard for Models 1000‐21250 only.
A E P G L S U
Grade F Model #
(2) (10) (3) (4) (5) (6) (9)
CFL20F STD $537 STD $93 $33 $35 N/A
CFL35F STD $537 STD $93 $33 $35 N/A
Modular Housings
97
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade F Replacement Elements
Replacement
Grade Replacement Repl. Qty List Price Repl. Qty List Price
Model # Stainless Steel
F Element Req'd Each Req'd Each
Element
CFL20F CF20FE 1 $67.82 C20FES 1 $166.41
CFL35F CF35FE 1 $80.46 C35FES 1 $182.01
CFL60F CF60FE 1 $105.36 C60FES 1 $239.44
Modular Housings
98
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters / Separators
CFL Series Grade G ‐ Oil Vapor Removal Filter (.01 micron, .003 ppm)
Grade List Price In/Out Dimensions Weight F.O.B.
G Model Flow (1) Connections HxW (lbs) Point
CFL20G 20 $202 3/8” & 1/2" NPTF 8x4 4.2 N
CFL35G 35 $228 3/8” & 1/2" NPTF 11x4 8.1 N
CFL60G 60 $324 3/8” & 1/2" NPTF 13x4 8.5 N
Modular Housings
Maximum operating pressure:
Models with manual drain: 300 psig;
Model 625P: 300 psig;
Models 1000 through 21250: 225 psig
Maximum inlet temperature: 150ºF (66ºC)
(1) Price includes element installed.
99
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade G Filter Options
Option Suffix Description:
A Internal automatic drain is pneumatically actuated for reliable discharges of collected liquids.
E Electronic Demand Drain
P Differential pressure slide indicator changes color when filter element requires replacement.
G Differential pressure gauge provides a visual indication when filter element requires replacement.
L Liquid level indicator allows monitoring of liquid level inside filter housing.
S Corrosion proof stainless steel cores for added structural integrity.
U For U‐ ASME stamp of inspection. Standard for Models 1000‐21250 only.
A E P G L S
Grade G Model #
(2) (10) (3) (4) (5) (6)
CFL20G $89 $537 $50 $93 $33 $35
CFL35G $89 $537 $50 $93 $33 $35
Modular Housings
100
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Grade G Replacement Elements
List Replacement
Grade Replacement Repl. Qty List Price
Model # Price Stainless Steel Repl. Qty Req'd
G Element Req'd Each
Each Element
CFL20G CF20GE 1 $92.34 C20GES 1 $197.62
CFL35G CF35GE 1 $98.35 C35GES 1 $210.62
CFL60G CF60GE 1 $127.01 C60GES 1 $262.62
Modular Housings
101
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters / Separators
CFL Series Accessories ‐ Models 20‐780
Description Part Number Unit Price
Modular Connector Kit for filters with housing numbers 20 through 170:
For Housings 20-60 with 3/8” & 1/2” NPT connections
Kit includes: (2) inserts, (4) screws & o-ring; C23428001 $81.12
For Housings 20-60 with 3/8” & 1/2” BSP connections
Kit includes: (2) inserts, (4) screws & o-ring; C23428003 $113.67
For Housings 100-170 with 3/4” & 1” NPT connections
Kit includes: (2) inserts, (4) screws & o-ring; C23428002 $63.07
For Housings 100-170 with 3/4” & 1” BSP connections
Kit includes: (2) inserts, (4) screws & o-ring; C23428004 $74.60
Manifold Connector Kit for Filters with housing numbers 250 through 780:
For Housings 250-375 (connections 1” & 1-1/2” NPT or BSP)
Kit includes: (4) bolts, (4) nuts & o-ring; C23436001 $68.09
For Housings 485-780 (connections 2” & 2-1/2” NPT or BSP)
Kit includes: (4) bolts, (4) nuts & o-ring; C23436002 $72.57
Wall Mounting Bracket:
Housings 20-60 (connections 3/8” & 1/2”) C23433101 $112.07
Housings 100-170 (connections 3/4”, 1”, 1-1/4”, 1-1/2”, 2” & 2-1/2”) G6001823 $89.91
Differential Pressure Indicators:
Differential pressure slide indicator C668515133 $67.18
Differential pressure gauge C668515131 $129.73
Differential pressure gauge and remote mounting kit (Kit includes fittings and tubing) C23442801 $183.62
Internal auto drain C05417008 $250.67
Manual Drain C05475501 $33.44
External Drain Adapter
For Housings 20 through 170 (brass; 250 psig) C23160101 $34.95
NOTE: Housings 250 through 375 - Adapter may be used or buttress adapter
(supplied with unit) may be removed, making a 1/2” NPT drain port available.
NOTE: Housings 485, 625, 780 - 1/2” NPT drain port available.
Filter Monitor
Filter Monitor (CFL 20-780) CHFM1 $982.45
Filter Monitor and remote mounting kit (CFL 625P-21250) CHFM2 $969.38
102
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
CFL Filter Illustration
103
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters / Separators
CFE Series (125‐3000 SCFM) ‐ Mist Eliminator
Model Differential Pressure Gauge
CFE1 S = Gauge with Reed Switch
CFE2
CFE3
CFE4
CFE5
CFE6
CFE7
CFE8
104
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters / Separators
CFG Series Spin‐On Filters (20‐350 SCFM) ELEMENTS ONLY
Model Element
CFG20 C = 0.01 mi. Coalescing
CFG40 P = 1.0 mi. Coalescing/Particulate
CFG60 G = 5.0 mm Bulk Liquid/Particulate
CFG80 V = Activated Carbon
CFG130
CFG160
CFG215
CFG350
Elements Only
Part
Price
Number
CFG20CE $237.00
CFG20GE $396.10
CFG20PE $237.00
CFG20VE $237.00
CFG40CE $409.94
CFG40GE $325.83
CFG40PE $258.49
CFG40VE $258.49
CFG60CE $269.90
CFG60GE $272.34
CFG60PE $276.27
CFG60VE $272.34
CFG80CE $290.54
CFG80GE $290.54
CFG80PE $476.30
CFG80VE $290.54
CFG130CE $310.56
CFG130GE $310.56
CFG130PE $393.21
CFG130VE $310.56
CFG160CE $381.35
CFG160GE $388.46
CFG160PE $386.70
CFG160VE $385.04
CFG215CE $425.26
CFG215GE $425.26
CFG215PE $425.26
CFG215VE $425.26
CFG350CE $460.56
CFG350PE $460.56
FOB: Bear, DE
105
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters / Separators
CFH Series High Efficiency Filter Elements Only (30‐1500 SCFM)
Model Element
CFH30 C = 0.01 mi. Coalescing (.01 ppm)
CFH65 P = 1.0 mi. Coalescing/Particulate (.1 ppm)
CFH75 G= 5.0mm Bulk Liquid/Particulate (5 ppm)
CFH100 V= Carbon/Vapor Removal (.003 ppm)
CFH150 D= Duplex (30 scfm filter only) (.003 ppm)
CFH225 RP***= Reverse Flow P After-filter (.1 ppm)
CFH300 RV***= Reverse flow V After-filter (.003 ppm)
CFH450
CFH650
CFH1000
CFH1250
CFH1500
CFH65 65 CFH65*E CF
CFH75 75 CFH75*E CF
CFH100 100 CFH100*E CF
CFH150 150 CFH150*E CF
CFH225 225 CFH225*E CF
CFH300 300 CFH300*E CF
CFH450 450 CFH450*E CF
CFH650 650 CFH650*E CF
CFH1000 1000 CFH1000*E CF
CFH1250 1250 CFH1250*E CF
CFH1500 1500 CFH1500*E CF
* Fill in element grade (C,P,G,V) Example: CFH65CE
** CFH30D filter uses a 0.01 mi. coalescing element and a charcoal element. 30DE designation includes
both elements.
Liquid Separators
CWSA Series (25 ‐ 120 SCFM)
Model Flow (scfm) In/Out Port List Price
CWSA-02-FGO 25 1/4" $256.22
CWSA-03-FGO 50 3/8" $305.81
CWSA-04-FGO 50 1/2" $309.08
CWSA-06-FGO 100 3/4" $494.04
CWSA-08-FGO 120 1" $527.54
FGO = Metal Bowl with Sight Gauge and Automatic Float Drain, 1/8” MPT
106
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Filters ‐ Regulators ‐ Lubricators
Particulate Filters 5 Micron
List Pipe Size Max* Nominal ** Dimension Weight Replacement List
Model # Price (in) Flow Flow WxH (lbs) Element Price
(scfm) (scfm) (in)
CF03-02-M00 $109.25 1/4” 35 16 1.5 x 3.6 0.4 CFRP-95-235 $39.70
CF16-02-G00 $140.08 1/4” 63 30 3.0 x 7.1 2 CFRP-95-160 $25.98
CF16-03-G00 $96.83 3/8” 74 35 3.0 x 7.1 2 CFRP-95-160 $25.98
CF16-04-G00 $143.82 1/2” 80 40 3.0 x 7.1 2 CFRP-95-160 $25.98
CF26-04-G00 $180.00 1/2” 150 70 3.3 x 7.3 3 CFRP-95-115 $26.97
CF30-06-G00 $247.96 3/4” 323 140 4.6 x 9.8 6 CFRP-95-209 $49.07
CF30-08-G00 $271.47 1” 316 160 4.6 x 9.8 6 CFRP-95-209 $49.07
CF = Consult Factory
Maximum Pressure: 200 psig Maximum Temperature: 150°F
*Maximum flow based on 150 psig/5 psid pressure drop
**Nominal flow based on 100 psig/1.5 psid pressure drop
Coalescing Filters 0.5 Micron
List Pipe Size Max* Nominal ** Dimension Weight Replacement List
Model # Price (in) Flow Flow WxH (lbs) Element Price
(scfm) (scfm) (in)
CM03-02-MS0 $140.90 1/4” 20 9 1.5 x 3.6 0.4 CMSP-95-991 CF
CM16-02-GS0 $168.29 1/4” 37 18 3.0 x 8.1 2 CMSP-95-988 $41.67
CM16-03-GS0 $172.49 3/8” 45 21 3.0 x 8.1 2 CMSP-95-988 $41.67
CM16-04-GS0 $170.04 1/2” 48 22 3.0 x 8.1 2 CMSP-95-988 $41.67
CM26-04-GS0 $223.56 1/2” 80 37 3.3 x 8.2 3 CMSP-95-989 $69.83
CM30-06-GS0 $429.91 3/4” 173 85 4.6 x 10.5 6 CMSP-95-992 $82.36
CM30-08-GS0 $429.91 1” 203 100 4.6 x 10.5 6 CMSP-95-992 $82.36
CF = Consult Factory
Maximum Pressure: 150 psig Maximum Temperature: 150°F
*Maximum flow based on inlet pressure of 150 psig/pressure drop of 3 psid
**Nominal flow based on inlet pressure of 100 psig/pressure drop of 1.5 psid
107
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Coalescing Filters 0.01 Micron
List Pipe Size Max* Nominal ** Dimension Weight Replacement List
Model # Price (in) Flow Flow WxH (lbs) Element Price
(scfm) (scfm) (in)
CM03-02-M00 CF 1/4” 20 9 1.5 x 3.6 0.4 CMTP-95-547 CF
CM16-02-G00 $180.24 1/4” 37 18 3.0 x 8.1 2 CMTP-95-548 $82.72
CM16-03-G00 $177.66 3/8” 45 21 3.0 x 8.1 2 CMTP-95-548 $82.72
CM16-04-G00 $229.91 1/2” 48 22 3.0 x 8.1 2 CMTP-95-548 $82.72
CM26-04-G00 $296.95 1/2” 80 37 3.3 x 8.2 3 CMTP-95-548 $82.72
CM30-06-G00 $462.42 3/4” 173 85 4.6 x 10.5 6 CMTP-95-551 $193.91
CM30-08-G00 $460.16 1” 203 100 4.6 x 10.5 6 CMTP-95-551 $193.91
CF = Consult Factory
Maximum Pressure: 150 psig Maximum Temperature: 150°F
*Maximum flow based on inlet pressure of 150 psig/pressure drop of 3 psid
**Nominal flow based on inlet pressure of 100 psig/pressure drop of 1.5 psid
Vapor/Odor Removal Filters
List Pipe Size Max* Nominal ** Dimension Weight Replacement List
Model # Price (in) Flow Flow WxH (lbs) Element Price
(scfm) (scfm) (in)
CM03-02-MX0 $368.97 1/4” 20 9 1.5 x 3.6 0.4 CMXP-95-054 CF
CM16-02-GX0 CF 1/4” 37 18 3.0 x 8.1 2 CMXP-95-987 $126.29
CM16-03-GX0 CF 3/8” 45 21 3.0 x 8.1 2 CMXP-95-987 $126.29
M16-04-GX0 CF 1/2” 48 22 3.0 x 8.1 2 CMXP-95-987 $126.29
CM26-04-GX0 CF 1/2” 80 37 3.3 x 8.2 3 CMXP-95-987 $126.29
CM30-06-GX0 CF 3/4” 173 85 4.6 x 10.5 6 CMXP-95-532 CF
CM30-08-GX0 CF 1” 203 100 4.6 x 10.5 6 CMXP-95-532 CF
CF = Consult Factory
Maximum Pressure: 150 psig Maximum Temperature: 150°F
*Maximum flow based on inlet pressure of 150 psig/pressure drop of 3 psid
**Nominal flow based on inlet pressure of 100 psig/pressure drop of 1.5 psid
Regulators
List Pipe Size Flow Dimension Weight
Model Price (in) Capacity W x H (in) (lbs)
(scfm)
CR03-02-000 $55.06 1/4” 24 1.5 x 3.3 0.5
CR16-02-000 $76.46 1/4” 72 3.0 x 5.2 2
CR16-03-000 $92.01 3/8” 81 3.0 x 5.2 2
CR16-04-000 $86.34 1/2” 88 3.0 x 5.2 2
CR26-04-000 $125.60 1/2” 185 3.4 x 6.5 2.5
CR30-06-000 $206.44 3/4” 481 4.3 x 10.3 6
CR30-08-000 $198.79 1” 500 4.3 x 10.3 6
CR40-0B-000 $370.26 1 1/2” 1,200 5.3 x 11.9 10.8
CR40-0C-000 $452.22 2” 1,200 5.3 x 11.9 10.8
CCS= Consult customer service
Automatic self‐relieving diaphragm is standard.
Maximum Pressure: 300 psig
Maximum Temperature: 150°F
Flow Capacity based on 100 psig inlet/90 psig outlet
Regulators do not come with pressure gauges. See pressure gauge section of price book for selection options.
108
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Integral Filter/Regulator
Model List Pipe Size Flow Dimension Weight
Price (in) Capacity W x H (in) (lbs)
(scfm)
CCB6-02-G00 $168.20 1/4” 64 3.0 x 10.1 2.4
CCB6-03-G00 $217.22 3/8” 70 3.0 x 10.1 2.4
CCB6-04-G00 $168.20 1/2” 70 3.0 x 10.1 2.4
Flow Capacity based on 100 psig inlet/90 psig outlet
Maximum Pressure: 200 psig
Maximum Temperature: 150°F
Automatic self‐relieving diaphragm is standard
All CB6 filters use a 5 micron element and a metal bowl with sight gauge
Lubricators
List Pipe Size Flow Useful Retention Dimension Weight
Model Price (in) Capacity (ozs) W x H (in) (lbs)
(scfm)
CL03-02-M00 CF 1/4” 47 1 1.5 x 4.5 0.4
CL16-02-G00 $163.46 1/4” 36 5 3.0 x 7.8 2.4
CL16-03-G00 $124.11 3/8” 59 5 3.0 x 7.8 2.4
CL16-04-G00 $122.33 1/2” 64 5 3.0 x 7.8 2.4
CL26-04-G00 $143.82 1/2” 128 10 3.4 x 7.8 3
CL30-06-G00 $437.85 3/4” 196 26 4.6 x 10.9 6
CL30-08-G00 $271.47 1” 374 26 4.6 x 10.9 6
CL40-0B-G00 $613.45 1 1/2” 927 26 5.5 x 11.6 16.3
CL50-0C-G00 $877.96 2” 1,186 26 5.5 x 12.2 14.3
CCS= Consult customer service
Maximum Pressure: 200 psig
Maximum Temperature: 150°F
Flow Capacity based on 150 psig/5 psid pressure drop
109
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Modular Filter ‐ Regulator ‐ Lubricator Accessories
Manifold Blocks - For use with 16 and 26 Series Only
Model List Pipe Size
CGPA‐95‐919 $42.09 1/2"
Pressure Gauge
Model # List NPT Connection Used On
CGRP-95-227 $33.86 1/8” for use with CR00 Series
CGRP-95-229 $33.86 1/4” for use with CR16, CR26, CR30, & CR40 Series
110
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Drain Valves
CDV1 Mechanical Demand Drain
Model # Description Capacity Inlet Port Drain Port List Price
CDV1-5 Mechanical Demand Drain, 5 oz metal bowl 150 scfm 1/2” 1/8” $206.44
CDV1-32 Mechanical Demand Drain, 32 oz metal bowl 250 scfm 1/2” 1/8” $407.02
Options
Suffix Description Port Size List Price
CGRP-96-000 Mechanical override for mechanical demand drain model CDV1-5. Device will be mounted to 1/8”
$36.34
valve
Champion Electronic Timer Drain
Model # Description Voltage Port Size List Price
P14240A Electric Drain Valve 115/1/60 1/4” $216.04
Options
Part Number Description Inlet Port Outlet Port List Price
P13749A Brass isolation valve with strainer 1/2” NPT (M) x 1/4” NPT (F) 1/4” NPT (M) $55.06
CDV4 Motorized Ball Valve
Model # Description Voltage Port Size List Price
CDV4-14 Motorized Ball Valve 115/1/50-60 1/2” $1,086.72
CDV4-18 Motorized Ball Valve 115/1/50-60 1” $1,309.55
111
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Oil/Water Separators
CSP EnviroChamp 2
Note: For proper performance, the CSP EnviroChamp 2 must be sized correctly and only be used with fully
demulsible lubricants, such as RotorLub® 4000, 4000 FG, and 8000.
Model # Description List Price
CSP15 15 Gallon EnviroChamp 2 $1,332.71
CSP30 30 Gallon EnviroChamp 2 $1,849.44
CSP60 60 Gallon EnviroChamp 2 $3,798.38
CSP120 (2) 60 Gallon Eliminator IIs & (1) DISTRIBUTOR $14,440.61
CSP180 (3) 60 Gallon Eliminator IIs & (1) DISTRIBUTOR $21,748.88
CSP240 (4) 60 Gallon Eliminator IIs & (1) DISTRIBUTOR $28,418.89
Note: A DISTRIBUTOR is used to improve carbon bed life by protecting against unwanted turbulence from surge related overloads. It is also
recommended when using demand style drain valves that can collectively deliver more than 43 oz. (CSP15), 64 oz. (CSP30), and 96 oz.
(CSP60).
Recommended Accessories
Part # Description List Price
M3550 DISTRIBUTOR - Condensate Management System - 3 port $1,002.77
M3554 .5 KW Heater for CSP15 $1,311.80
M3555 1 KW Heater for CSP30/60 (2 each for CSP60) $3,186.11
Filter Kits
Part # Description List Price
M3537 CSP15 Expansion Chamber Element/Separation Filter/Pre-Adsorption Filter/Carbon Bed $389.45
M3538 CSP30 Expansion Chamber Element/Separation Filter/Pre-Adsorption Filter/Carbon Bed $686.19
M3539 CSP60 Expansion Chamber Element/Separation Filter/Pre-Adsorption Filter/Carbon Beds $1,364.81
Replacement Filters
Part # Description List Price
M3540 CSP15 Expansion Chamber Element $36.41
M3541 CSP15 Separation Filter $65.27
M3542 CSP15 Pre-Absorption Element $78.97
M3543 CSP15 Carbon Element $283.40
M3544 CSP30/60, DISTRIBUTOR Expansion Chamber Element $42.55
M3545 CSP30/60 Separation Filter $94.10
M3546 CSP30 Pre-Absorption Element $119.72
M3547 CSP30 Carbon Element $459.03
M3548 CSP60 Pre-Absorption Element $209.13
M3549 CSP60 (2) Carbon Elements $889.21
112
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Oil/Water Separators
CH7
Annual Media Kit Change
Part # Description List Price
CH7‐KIT Oil Water Separator - 50 CFM Annual Maintenance Kit $148.32
Note: Designed for smaller compressed air systems with a maximum capacity of 50 CFM
FOB: EXW Lancaster, NY
113
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Oil/Water Separators
CHWS Series
Note: For proper performance, CHWS Series oil/water separators must be sized and installed correctly.
Model # Description List Price
CHWS‐50 Oil Water Separator - 50 CFM $257.70
CHWS‐100 Oil Water Separator - 100 CFM $584.19
CHWS‐250 Oil Water Separator - 250 CFM $943.19
Replacement Cartridges
Part # Description List Price
CHWS‐E50 Replacement Cartridge - 50 CFM $162.62
CHWS‐E100 Replacement Cartridge - 100 CFM $275.74
Install Kits
Part # Description List Price
C‐OPC‐IK1 Installation Kit (80'/ 4 Drain Connections) $488.69
C‐OPC‐IK2 Installation Kit (160'/ 6 Drain Connections) $837.34
C‐OPC‐IK3 Installation Kit (240'/ 6 Drain Connections) $1,002.58
C‐OPC‐IK1 includes:
(80') 14mm aluminum tubing, (20) mounting brackets, (4)14mm x 1/4" tube adapters, (12) straight
union connectors, (4) 1/4" MNPT x 1/4" poly adapter, (25') 1/4" poly tubing.
C‐OPC‐IK2 includes:
(160') 14mm aluminum tubing, (40) mounting brackets, (6)14mm x 1/4" tube adapters, (18) straight
union connectors, (6) 1/4" MNPT x 1/4" poly adapter, (25') 1/4" poly tubing.
C‐OPC‐IK3 includes:
(240') 14mm aluminum tubing, (60) mounting brackets, (6)14mm x 1/4" tube adapters, (24) straight
union connectors, (6) 1/4" MNPT x 1/4" poly adapter, (25') 1/4" poly tubing.
CHWS‐250
FOB: Charlotte, NC
114
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Oil/Water Separators
Intelli‐PAK 250 ‐ 1500 CFM
Complete Units
Model PN Description Size (Gal.) List Price
Intelli‐PAK250‐CP IP250‐CP Oil Water Separator 250 cfm Cabinet Style 7 $1,185.00
Intelli‐PAK400‐CP IP400‐CP Oil Water Separator 400 cfm Cabinet Style 7 $1,691.00
Intelli‐PAK750‐CP IP750‐CP Oil Water Separator 750 cfm Cabinet Style 7 $2,530.00
Intelli‐PAK1000‐CP IP1000‐CP Oil Water Separator 1000 cfm Cabinet Style 25 $3,901.00
Intelli‐PAK1500‐CP IP1500‐CP Oil Water Separator 1500 cfm Cabinet Style 25 $4,032.00
Sizing is based up the cfm flow of your compressor. Choose the Intelli‐PAK that correlates with your cfm.
Life expectancy of a Intelli‐PAK unit has been designed to last up to 6 months when sized to correlate to your compressors cfm
flow.
Replacement Parts
F.O.B. shipping point: Batavia, IL, 60510
115
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Nitrogen Advantage
Standard Features:
● ASME coded receiver ● NA6‐3P includes purge/fill system, (4) hoses, (2) extra ports
● Filter replacement indicators ● Membranes made in the U.S.A.
● Li ing eye centrally located on the receiver ● Automa c shutoff
● Coalescing and par culate filters
Notes:
● All prices are F.O.B. shipping point
● Sta onary generator factory preset on/off pressure 145/160 psig
● Lower pressure se ngs available; contact Champion Customer Service
ALL NITROGEN PRODUCTS RECEIVE A 40% DISCOUNT.
Nitrogen Generators
N2 Output (scfm) Nitrogen Receiver Size Air Input (scfm) at Max Inlet
Style Part Number List Price
at 160 psig Purity (Gal.) 160 psig Pressure (psig)
Portable 3.2* NA6‐3P 95‐99.9% 30 6.3* 175 $17,776.00
4.3 NA4‐60 95‐99.9% 60 8.4 175 $10,779.00
Stationary 7.1 NA7‐80 95‐99.9% 80 13.8 175 $13,154.00
14.2 NA14‐80 95‐99.9% 80 27.6 175 $24,678.00
* Flow is at 125 psig. NA6‐3P factory preset on/off pressure 110/125 psig
Nitrogen Accessories
Description Part Number List Price
Auto fill cart w/ (4) 25ft hoses, (2) extra ports CC1021234 $4,819.37
12 volt battery VP1034983 $785.01
Battery charger VP1024707 $216.70
Low pressure conversion kit, (NA4‐60, NA7‐80)* CC1021473 $972.94
Low pressure conversion kit, (NA14‐80)* CC1021474 $671.08
Hose, Inflation, w/ Tire Chuck, 25' VP1024849 $191.33
Hose and Reel (Green) 35' x 3/8" N35R $595.55
Hose and Reel (Green) 50' x 3/8" N50R $898.79
Replacement filter (1 micron / 1 ppm) FIL14CE $141.99
Replacement filter (0.1 micron / .0008 ppm) FIL14FE $189.32
Hand held nitrogen/oxygen analyzer CC1010674 $1,106.64
N2 rearview mirror hang tag, Qty 2000 CC1020782 $1,702.33
N2 window stickers, Qty 100 CC1020783 $334.73
Green valve stem cap, Qty 1000 CC1010411 $85.90
Chrome valve stem cap, brass stem, Qty 100 CC1020777 $79.36
Green valve stem cap, aluminum stem, Qty 100 CC1020779 $79.36
Green valve stem sleeve, Qty 500 VP1021897 $221.76
Green valve stem o‐rings, Qty 2000 VP1021896 $237.72
Point of sale promotion kit CC1010413 $460.55
Air chuck, N2 VP1027992 $34.05
* Specify system pressure when ordering low pressure conversion kit
ALL NITROGEN PRODUCTS RECEIVE A 40% DISCOUNT.
116
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
RotorLub Price List
Lubricant Authorized for Champion Rotary Air Compressors
* All prices are subject to a 40% discount.
NOTES:
None of the prices cover any provisions for payment of environmental oil taxes which vary by state.
117
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
ChampLub Price List
Lubricant Authorized for Champion Lubricated Reciprocating Air Compressors
* All prices are subject to a 40% discount.
NOTES:
None of the prices cover any provisions for payment of environmental oil taxes which vary by state.
118
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Rotary Vane Compressor Lubricants
1 GALLON
Product Application Part No. List Price
CS300 Rotary Vane Diester Oil K0083531 $154.31
GCL83S Rotary Vane Gas Compressors 204‐2259‐G $192.10
5 GALLON PAIL
Product Application Part No. List Price
CS100 Rotary Vane Cold Weather Applications K0159201 $578.72
CS300 Rotary Vane Diester Oil K0074384 $670.10
CSS30 Rotary Vane and K‐A Recip Food Grade Oil K0067781 $514.01
55 GALLON DRUM
Product Application Part No. List Price
CS100 Rotary Vane Cold Weather Applications K0159202 $6,180.47
CS300 Rotary Vane Diester Oil K0074385 $5,776.13
L & LRS Series Compressor Lubricants
1 GALLON
Product Application Weight Part No. List Price
CompLube 8000 Stationary Screw 8,000 Hours 8 28H368 $205.76
CompLube 4000 Stationary Screw 4,000 hours Standard Factory Fill 8 28H375 $120.18
CompLube 8000HT Stationary Screw 8,000 Hour Hi‐Temp Lube 8 28H390 $220.78
CompLube 4000FG Stationary Screw 4000 Hour Food Grade 8 28H391 $199.41
2.5 GALLON PAIL
Product Application Weight Part No. List Price
CompLube 8000 Stationary Screw 8,000 Hours 20 28H369 $534.00
5 GALLON PAIL
Product Application Weight Part No. List Price
CompLube 4000FG Stationary Screw 4000 Hour Food Grade 40 28H373 $645.52
CompLube 2000P 2000 Hour Portable Screw Lube 40 28H378 $354.95
CompLube 8000 Stationary Screw 8,000 Hours 40 28H388 $929.13
CompLube 4000 Stationary Screw 4,000 Hour Standard Factory Fill 40 28H389 $510.76
CompLube 8000HT Stationary Screw 8,000 Hour Hi‐Temp Lube 40 28H371 $1,030.19
CompLube Cleaner All rotary Screw Products Compressor Cleaner 45 28H380 $835.35
55 GALLON DRUM
Product Application Weight Part No. List Price
CompLube 4000FG Stationary Screw 4000 Hour Food Grade 420 28H374 $7,111.66
CompLube 2000P 2000 Hour Portable Screw Lube 456 28H379 $3,033.21
CompLube 8000 Stationary Screw 8,000 Hours 445 28H370 $9,025.95
CompLube 4000 Stationary Screw 4,000 Hour Standard Factory Fill 427 28H377 $4,592.42
CompLube 8000HT Stationary Screw 8,000 Hour Hi‐Temp Lube 441 28H372 $10,367.06
CompLube Cleaner All Rotary Screw Products Compressor Cleaner 455 28H381 $7,751.73
119
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Remanufactured Products
Champion® Air‐Cooled A Series Air and Gas Compressor Prices
Model Reman List Price Net Core Charge
APOGAAX $8,062.54 $766.38
APOGBAX $8,062.54 $766.38
ANPEAAX $18,084.43 $766.38
ATLE6AX $7,913.24 $766.38
Policy and Conditions:
● Orders for these remanufactured units can be direct entered into the Champion system.
● Invoicing of the units will be at the LIST price shown in the above table subject to your standard discount.
● Outbound shipments will be FOB shipping point freight prepaid to des na on or US port of export by
GDI corporate carrier.
Core Return Requirements:
● Champion Customer Care will enter and forward an Authorized Return Goods (ARG) transac on, at zero
core value.
● Return freight on the compressor core will be allowed to the Reman Center, when shipped by the GDI
specified carrier in the return instructions.
● A copy of the Authorized Return Goods (ARG) form must accompany all returned units.
● Sixty days will be allowed for the return of the core.
● If the core is not returned to GDI within the sixty days, a debit memo for the NET core value will be issued to
your account.
● Returned compressors that are missing major components or have been rendered defec ve by mishandling or
non‐operational causes are subject to acceptance upon inspection by a Champion representative
and may be subject to additional charges or return.
120
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Champion® Oil‐Less VT and WT Series Air Compressor Prices
No. of Stages Reman Model Number HP Reman List Price Net Core Credit
VTS35AX 5, 7.5, 10 $7,104.80 $1,319.34
VTS35ASUX 5, 7.5, 10 $7,781.64 $1,319.34
VTS35WX 5, 7.5, 10 $7,798.29 $1,438.60
VTS35WSUX 15 $7,669.58 $1,238.68
Single
WTS55AX 15 $10,714.70 $2,504.16
WTS55ASUX 15 $11,390.05 $2,041.20
WTS55WX 15 $11,535.43 $2,496.51
WTS55WSUX 15 $12,212.30 $2,155.85
VTR20AX 5, 7.5 $8,344.93 $1,365.66
VTR20ASUX 5, 7.5 $8,055.72 $1,191.32
VTR20WX 5, 7.5 $8,269.11 $1,462.98
VTR20WSUX 5, 7.5 $8,893.08 $1,462.98
Two
WTR45AX 10, 15 $10,714.70 $2,471.35
WTR45ASUX 10, 15 $11,390.05 $2,471.35
WTR45WX 10, 15 $11,535.43 $2,750.30
WTR45WSUX 10, 15 $12,212.30 $3,630.34
**Please specify voltage/phase with order**
● CORE CREDIT PRICES ARE NET PRICES. A 25% DISCOUNT APPLIES ONLY TO THE PUMP LIST PRICE.
● Suffix of Bare Pump Models: A = Air Cooled, W = Water Cooled, SU = Suc on Unloader, X = Remanufactured
● All pumps supplied less filter, fan & flywheel, and discharge hose (if applicable). Items must be removed from
old pump prior to returning.
● WTS55 models prior to serial #OF3800 will require a new motor pulley to accommodate current design rebuilt
pump, 1140 RPM driven speed. Check original motor pulley and order if required.
Policy and Conditions:
● Units must be shipped FOB shipping point, freight collect to consignee.
● Freight must be prepaid on the pump being returned for exchange.
● If exchange units are not returned within 45 days from receipt of remanufactured pump, the core credit will
not be given.
● Returned pumps found to be missing major components or defec ve due to mishandling or non‐opera onal
causes are subject to acceptance upon inspection by authorized Gardner Denver personnel and may be
subject to additional charges.
● Returned pumps must be shipped in the original packaging or equivalent, properly sealed and secured for
motor freight transit. All pumps are shipped in returnable packaging for your convenience.
● Remanufactured exchange pumps are warranted for a period of twelve (12) months or fi een (15) months
from shipment, whichever comes first.
Core Return Requirements:
● Contact Champion Customer Care for an authoriza on to return goods (ARG) prior to shipment of any core
material.
● A copy of the authorized return goods (ARG) form must accompany all units returned for core credit.
● Pump model and serial number must be provided.
● The core must not be missing any major components. Non‐opera onal causes such as rust, fire, or mishandling
will not be accepted. Any other major damage which renders the core non‐repairable will not be accepted.
Champion will conduct an external inspection for visibly cracked or broken casting.
121
CA19‐1‐105 ISSUE 34
May 1st, 2022
SUPERSEDES PREVIOUS PRICING
Champion® Lubricated R, RV and PL Series Air Compressor Prices
Bare Model Reman Model * Reman List Price Net Core Credit
SPLASH LUBE
R40A Z2898X $4,603.25 $453.60
R40AHU Z2901X $4,781.47 $543.20
R70A Z2742X $6,094.51 $688.53
R70A/LOSC Z2743X $6,272.71 $749.12
R70AHU Z2745X $6,272.71 $618.09
PRESSURE LUBE
PL15A Z8160X $2,138.62 $209.35
PL30A Z8165X $4,314.70 $477.12
PL40A Z8170X $4,265.52 $578.22
PL70A Z8175X $6,442.18 $837.42
* Note: Units offered are all 175 PSIG. Contact Customer Care for 125 or 250 PSIG units.
All remanufactured bare pumps are painted black
Policy and Conditions:
● Orders for these remanufactured units must be forwarded to your Champion Customer Care Representa ve
for entry.
● Invoicing of the units will be at the LIST price shown in the above table subject to a 25% discount.
● Outbound shipments will be FOB shipping point freight prepaid to des na on or US port of export by GDI
corporate carrier.
● All units are warranted for a period of twelve (12) months or fi een (15 months) from shipment, which ever occurs first.
Core Return Requirements:
● Champion Customer Care will enter and forward an Authorized Return Goods (ARG) transac on, at the NET
core value displayed in the above table.
● Return freight on the compressor core will be allowed to the Reman Center, when shipped by the GDI
specified carrier in the return instructions.
● A copy of the Authorized Return Goods (ARG) form must accompany all returned units.
● The compressor sheave, intake air filter and low oil level monitor, where applicable, are to be removed prior
to returning the cores to conserve on inbound freight charges.
● When retuning compressor cores on skids, consolidate as many units per skid as is prac cal for safe transit.
● Sixty days will be allowed for the return of the core, at which point the return authoriza on will be cancelled.
● Returned compressors that are missing major components or have been rendered defec ve by mishandling
or non‐operational causes are subject to acceptance upon inspection by a Champion representative and may
be subject to additional charges or return.
122