Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

Demonstration Checklist

Candidate Name:

Assessor Name:
Nereo Reoliquio
Date of Assessment:
Time of Assessment:
Instructions for PLEASE SEE ATTACHED
Demonstration: INSTRUCTION FOR
DEMONSTRATION (Candidate)

Given the necessary materials, tools


and equipment, the candidate must
be able to perform the following tasks
within the allotted time.

1. Plan and Prepare for Installation


2. Install Computer System and
Networks
3. Conduct Test

Materials and Equipment:


Computer System
Installation disks
DVD/DVD Rom drive
Screw driver
Put a √ to show if the evidence is demonstrated
During the demonstration of skills, did the Yes No N/A
candidate:
 Plan and prepare task in accordance with
OH&S policies*

 Appropriate personnel are consulted to ensure


the work is coordinated effectively with others
involved on the work site

 Selects and use hand tools appropriate to the


task*

 Approval is obtained in accordance with


established procedures from appropriate
personnel before any contingencies are
implemented

 Planned and prepared installation in


  
accordance with the OHS policies and
procedures.
 Checked all computer accessories and
  
peripherals.

 Configured boot sequence to boot from


CD/DVD ROM drive.   
 Backed up all important files
  
 Deleted all existing partition/s
  
 Created required partition.
  
 Formatted the partition/s
  
 Finished the installation with minimal
guidance from anyone.   
 Devices / systems are installed in accordance with
requirements, without damage or distortion to the   
surrounding environment or services*
 Devices / systems are terminated and
connected in accordance with requirements*   
 Unplanned events or conditions are responded
to in accordance with established procedures*   
 Approval is obtained in accordance with
established procedures from appropriate   
personnel before any contingencies are
implemented
 On-going checks of the quality of the work are
undertaken in accordance with established   
procedures
 Circuits and systems are checked as being
isolated where necessary using specified   
testing procedures*
 Devices / systems and/or installation is tested
to determine whether it conforms to   
requirements*
Candidate’s Demonstration was:

Satisfactory Not Satisfactory

You might also like