Professional Documents
Culture Documents
999 S 3 Main
999 S 3 Main
999 S 3 Main
Upper boom point capacity for liftcrane service with single part MACHINE TRAVEL: Machine to travel on a firm, level
whip line is 29,500 Lbs. or 59,000 Lbs. with two part whip line. and uniformly supporting surface and boom within boom angle
When boom butt mounted auxiliary drum is used, capacity with range shown in capacity chart. Refer to Maximum Allowable
single part whip line is 20,000 Lbs. or 40,000 Lbs. with two part Travel Specification chart No. 8225-A.
whip line. In all cases, upper boom point capacities cannot
exceed those listed for main boom capacity. OPERATING RADIUS: Operating radius is horizontal
distance from axis of rotation to center of vertical hoist line or
250 Ft. thru 290 Ft. boom lengths require only the middle two load block. Boom angle is angle between horizontal and
sheaves in lower boom point. All other sheaves must be centerline of boom butt and inserts, and is an indication of
removed from lower boom point. operating radius. In all cases, operating radius shall govern
capacity.
Note: 22L boom top No. 196142 or No. 417403 required for
capacities greater than or equal to 462,500 Lbs. BOOM POINT ELEVATION: Boom point elevation is
vertical distance from ground level to centerline of boom point
Weight of jib, all load blocks, hooks, weight ball, slings, hoist shaft.
lines, etc., beneath boom and jib point sheaves, is considered
part of main boom load. Boom is not to be lowered beyond radii MACHINE EQUIPMENT: Machine equipped with
where combined weights are greater than rated capacity. Where 28 Ft. 2 in. crawlers, 48 in. treads, 10 Ft. 3 in. retractable
no capacity is shown, operation is not intended or approved. gantry, 30 Ft. live mast, 20 part boom hoist reeving, boom
support straps or four 1-3/8 in. boom pendants, 219,600 Lb.
OPERATING CONDITIONS: Machine to operate in a crane counterweight, two 22,000 Lb. and two 18,000 Lb.
level position on a firm uniformly supporting surface with carbody counterweights.
gantry up. Refer to boom rigging No. 195459 (No. 82) or
8218-A, 8-3-01/GA
Page 1 of 8
Manitowoc Cranes, Inc.
Manitowoc, Wisconsin 54220 U.S.A.
8218-A, 8-3-01/GA
Page 2 of 8
Manitowoc Cranes, Inc.
Manitowoc, Wisconsin 54220 U.S.A.
8218-A, 8-3-01/GA
Page 3 of 8
Manitowoc Cranes, Inc.
Manitowoc, Wisconsin 54220 U.S.A.
8218-A, 8-3-01/GA
Page 4 of 8
Manitowoc Cranes, Inc.
Manitowoc, Wisconsin 54220 U.S.A.
8218-A, 8-3-01/GA
Page 5 of 8
Manitowoc Cranes, Inc.
Manitowoc, Wisconsin 54220 U.S.A.
8218-A, 8-3-01/GA
Page 6 of 8
Manitowoc Cranes, Inc.
Manitowoc, Wisconsin 54220 U.S.A.
8218-A, 8-3-01/GA
Page 7 of 8
Manitowoc Cranes, Inc.
Manitowoc, Wisconsin 54220 U.S.A.
8218-A, 8-3-01/GA
Page 8 of 8