Professional Documents
Culture Documents
Oc Standard Stems Icr Headset Adapter en Es
Oc Standard Stems Icr Headset Adapter en Es
STAN DA R D ST E M S
A DA PT E R
FOR ICR HEADSETS
2 | O R BEA STA N DA R D STE M S A DA PTE R · FO R I CR HEADSETS O RB EA | 3
EN
ORBEA COMPATIBLE ICR FRAMES
STA NDAR D (with oval ICR headset spacers): When installing the HS01 adapter, the neces-
sary headset spacers and the standard stem,
The compatibility of the assembly may differ
depending of the new stem´s geometry. The
STE MS Orca OMX 2020-2022 the assembly height may differ from the pre-
vious height with an OC ICR stem.
new stem must allow for the gear and brake
lines to enter the adapter with a smooth
A DA PTER
bend for a correct operation of the gears
Orca OMR 2021-2022 Check that the distance between the headset and the brakes.
cover and the bottom of the stem does not
Orca Aero OMX 2022 exceed the maximum stack height defined in
FOR ICR HEADSETS the bicycle´s technical manual.
Terra OMR 2022
Check that the length of the fork´s steerer
tube allows for a secure installation of the
The OC HS01 standard stem adapter allows for the instal-
stem and that the cables are long enough.
lation of non-OC external cabling stems compatible with ORBEA NON COMPATIBLE ICR FRAMES
standard round headset spacers on Orbea frames with ICR (with round ICR headset spacers): Never install headset spacers above the
headsets.
stem. The length of the fork´s steerer tube
Avant H Disc 2021 must be appropiate so no spacers are need-
ed above the stem.
Vibe 2021
The stem must be installed onto the fork´s
Terra Hydro 2022
steerer tube so both stem bolts are over an
area of the steerer tube. Never install the
Gain 2021-2022 not compatible even though it uses oval stem in a position where the top stem bolt is
ICR spacers The front light cable cannot be routed through positioned above the upper limit of the fork´s
the adapter´s grommets. steerer tube.
EN
When using the HS01 adapter with stems When using the HS01 adapter with the OC2 external cabling stem, it
from other manufacturers, no headset spac- may be necessary to use a 5mm headset spacer (X405) to achieve a
ers must be installed between the bottom of correct bend of the gear a brake lines before they enter the adapter.
the stem and the adapter.
Consult the OC2 Road stem spare parts list in the OC Road Cockpit
Any headset spacers must be installed be- Components document from Orbea´s website.
tween the headset cover and the adapter.
1.2/2 5 mm
1.2/2 1.2/2
5 mm
1.1
1.2/2
10 mm 1.1 1.1
10 mm 10 mm 1.1
10 mm
01 OC HS01 STD STEMS ICR HEADSETS ADAPTER 02 OC ICR STANDARD STEM ADAPTER GROMMET KIT
ART Nº: X882 Q UA N TI TY ART Nº: X883 Q UANTITY
1.1 HS01 adapter body 1 2.1 Two hole rubber grommet 2
1.2 Two hole rubber grommet 2 2.2 One hole rubber grommet 2
1.3 One hole rubber grommet 2
6 | O R BEA A DA PTA D OR D E P OTE N CIAS ESTÁNDAR · PARA DI RECCI O NES I CR O RB EA | 7
ES
CUADROS ORBEA COMPATIBLES
A DA PTADOR (con separadores de dirección ovales ICR):
Al instalar el adaptador HS01, los separa-
dores de dirección necesarios y la potencia
AVISO La compatibilidad del montaje puede variar
dependiendo de la geometría de la potencia
ES
AVISO Para el uso del adaptador HS01 junto a po- AVISO Para el uso del adaptador HS01 junto a potencias OC2 Road
tencias de otros fabricantes, no debe insta- de cableado externo, puede ser necesario el uso de un separador de
larse ningún separador de dirección entre la dirección de 5mm (X405) para conseguir una curva de las fundas
potencia y el adaptador. de cambio y freno correcta antes de entrar en el adaptador HS01.
Cualquier separador debe ser instalado entre Consulta los componentes de la potencia OC2 Road en el documento
la tapa de la dirección y el adaptador. Road Cockpit components en la web de Orbea.
1.2/2 5 mm
1.2/2 1.2/2
5 mm
1.1
1.2/2
10 mm 1.1 1.1
10 mm 10 mm 1.1
10 mm
01 ADAPTADOR OC POTENCIAS STD DIRECCIÓN ICR 02 KIT GOMAS ADAPTADOR OC ICR POTENCIAS STD
ART Nº: X882 CA N TI DA D ART Nº: X883 CANTIDAD
1.1 Cuerpo adaptador HS01 1 2.1 Tapones goma 2 agujeros adaptador HS01 2
1.2 Tapones goma 2 agujeros adaptador HS01 2 2.2 Tapones goma 1 agujeros adaptador HS01 2
1.3 Tapones goma 1 agujeros adaptador HS01 2
WWW.OR B EA .COM