This document lists various construction materials and the tests performed on each to check quality. It tests cement for setting time, compressive strength at 7 and 28 days, soundness, fineness and consistency. It tests reinforced steel, barbed wire, structural angles and other metals for tensile strength, elongation, bending and proof stress. It tests bricks for compressive strength, water absorption and efflorescence. Concrete pavers and blocks are tested for compressive strength, flexural strength, water absorption and abrasion value. Precast concrete panels and blocks are also tested for compressive strength. Rebound hammers are used to test structures for capacities up to and above 2.5 lac litres, as well as other
This document lists various construction materials and the tests performed on each to check quality. It tests cement for setting time, compressive strength at 7 and 28 days, soundness, fineness and consistency. It tests reinforced steel, barbed wire, structural angles and other metals for tensile strength, elongation, bending and proof stress. It tests bricks for compressive strength, water absorption and efflorescence. Concrete pavers and blocks are tested for compressive strength, flexural strength, water absorption and abrasion value. Precast concrete panels and blocks are also tested for compressive strength. Rebound hammers are used to test structures for capacities up to and above 2.5 lac litres, as well as other
This document lists various construction materials and the tests performed on each to check quality. It tests cement for setting time, compressive strength at 7 and 28 days, soundness, fineness and consistency. It tests reinforced steel, barbed wire, structural angles and other metals for tensile strength, elongation, bending and proof stress. It tests bricks for compressive strength, water absorption and efflorescence. Concrete pavers and blocks are tested for compressive strength, flexural strength, water absorption and abrasion value. Precast concrete panels and blocks are also tested for compressive strength. Rebound hammers are used to test structures for capacities up to and above 2.5 lac litres, as well as other