Professional Documents
Culture Documents
Wall e
Wall e
miahandcrafter.com/atelier/wall-e-pattern/
Hi! How are you guys? It’s been a while since my last pattern, hehe. I’m sorry about that,
but lately, I’m rarely crocheting. This doesn’t mean that I’m tired of crocheting or anything
like that, crochet still my passion. What is happening is that I don’t have time to crochet at
the moment, because I’m focusing in my career.
I’m sure that you all are very excited with the last Star Wars movie, right? :D Its is A-W-E-S-
O-M-E !! I really would like to make a BB-8 pattern, but I can’t find any time right now ._.
Maybe one day right?
Well, today’s pattern is Wall-e from the same name movie, which is one of my favorites. It’s
a very lovely and well done movie. I tried to make a small pattern, with just the essencial
details and not too complicated. However… in the end I think that the pattern is a bit
complicated, it has too many pieces… *Sigh* I’m sorry guys >.<
Materials:
Notes:
– I always do my crochet works using continuous rounds. I will let you know when you have
to join rounds;
– Everytime I will do a crochet work, the first thing I do is take a look in the entirely pattern
before start doing it, so, I can have an idea of how the pattern works. Well, I recommend
you to do the same;
– For sewing the pieces together you will use the tapestry needle;
1/21
Recently, I’m having a hard time to answer all the
questions sent to my email and the comments. I’m
sorry that I’m not able to answer your doubts.
However, if you have any doubt, I’m sure that it is
worth to leave a comment here, because even if I
can’t answer you, I’m sure that someone in the
community will try to help you out ^^
Pattern:
This is how the top edge should look like when sewn
to his body:
Finish off.
– Eyes:
Back
. Tube (make 2):
Round 1: Make 10 sc in MC (10)
Round 2-8: sc in each sc (10)
3/21
Finish off.
Round 1: 6 sc in MC (6)
Finish off.
Assembly:
4/21
5/21
3. Sew the “Grey corners in “y” shape from the
bottom”:
6/21
7/21
5. Using grey felt make two pieces like the one in this photo (they are placed each one in
each side) and glue them to his body:
6. Using grey felt make the front ractangle and glue it to his body:
8/21
7. Put some fiberfill inside and glue the “Grey piece where his arms are attached” in the
same place as shown in the photo:
8. Now, before sewing his arms, it’s necessary to insert a wire inside his body to keep his
arms in place. To be able to insert the wire inside the cube I had to pierce with a sharp
needle and then enlarge the small hole with a larger needle. After that I was able to insert
the piece of wire:
9/21
Pierce the cube with a sharp needle
Then, cut two pieces of wire (they need to be bigger than the fingers) and bend it to make it
double.
10/21
Insert the wire.
Bend the wire near his body and insert his arm through it.
11/21
After that insert the wire inside his fingers
Finally, insert the wire inside his arm and sew his fingers:
10. Using a piece of white felt and black fabric paint make this detail of his arms:
11. To make his legs first cut two pieces of a thick wire in the size of his legs and bend it in
this shape (get an idea with the photos of the complete wall-e):
12/21
Sew two pieces of his leg with the wire
inside:
12. Cut a piece of wire and try to shape it like in the photo bellow. This is going to be his
neck.
13/21
Then, insert the wire into his body:
14/21
13. Now you are going to sew the “Grey cylinder between the eyes” to the top of his neck:
14. To make his eyes I used EVA. I cut two pieces each one for each eye:
Then, I cut two pieces of grey felt and glued into the eva.
16/21
Finally, sew his eyes to the “Grey cylinder between the eyes”:
Now, stuff each “Tube” with fiberfill and glue it to the back of each eye.
17/21
Don’t forget to make the reflection in his eyes:
15. Make the details in his front painel using felt and fabric paint and embroider his name:
18/21
16. With a black yarn and using only crochet chains make this two wires and sew each one
into each eye and both into the “Grey cylinder between the eyes”:
17: Using EVA I made some gears and painted them with silver paint:
19/21
I did not create this character, Wall-e is copyright of Disney!!
3. If you wish to share this pattern, you may create a link to my blog, but please do not post it on your
site;
5. You are free to adapt this pattern, you can build another upon this one, but you must give
appropriate credit to me for the original pattern;
Follow me on Facebook
20/21
Follow me on Facebook
Follow me on Instagram
Miigu – Etsy Shop
21/21