The document provides instructions to prepare a warehouse layout using a U-shaped flow design. It lists key areas to include and specifies the location of thermohygrometers based on a risk assessment. Temperature and humidity specifications are also provided for each area, with raw materials requiring cold storage between 2-8°C and most other areas requiring temperatures below 25°C and relative humidity below 55% plus or minus 5%.
The document provides instructions to prepare a warehouse layout using a U-shaped flow design. It lists key areas to include and specifies the location of thermohygrometers based on a risk assessment. Temperature and humidity specifications are also provided for each area, with raw materials requiring cold storage between 2-8°C and most other areas requiring temperatures below 25°C and relative humidity below 55% plus or minus 5%.
The document provides instructions to prepare a warehouse layout using a U-shaped flow design. It lists key areas to include and specifies the location of thermohygrometers based on a risk assessment. Temperature and humidity specifications are also provided for each area, with raw materials requiring cold storage between 2-8°C and most other areas requiring temperatures below 25°C and relative humidity below 55% plus or minus 5%.
The document provides instructions to prepare a warehouse layout using a U-shaped flow design. It lists key areas to include and specifies the location of thermohygrometers based on a risk assessment. Temperature and humidity specifications are also provided for each area, with raw materials requiring cold storage between 2-8°C and most other areas requiring temperatures below 25°C and relative humidity below 55% plus or minus 5%.
Warehousing Layout U shaped with THG location & room condition
I. Prepare a warehouse layout using the U shaped flow design
Indicate the following areas: RELEASED - Raw materials RELEASED - Packaging materials RELEASED - PNP-FED RELEASED - PDEA Receiving Quarantine Sampling Rejected (materials, products) RELEASED Finished products Dispatching area II. On your layout, identify the location of thermohygrometer based on your risk assessment:
Use this picture as your indicator of location
III. Identify the temperature and humidity specification
(All areas indicated in number 1) AREAS Temperature °C Relative Humidity % Released - raw materials 2°C to 8°C (Cold NMT 55 ±5% temperature) Released – Packaging 20° to 25 °C NMT 55 ±5% materials Released - PNP-FED 21° to 23 °C NMT 55 ±5% Released - PDEA 25° to 26°C NMT 55 ±5% Released – Finished Products NMT 25°C NMT 55 ±5% Receiving NMT 25 °C NMT 55 ±5% Quarantine NMT 25°C NMT 55 ±5% Sampling 20-25°C Not applicable Rejected (materials, products) NMT 25° Not applicable Dispatching Area 20 °C Not applicable