Professional Documents
Culture Documents
Sika Viscocrete - 3005.pt - en
Sika Viscocrete - 3005.pt - en
com
Sika® ViscoCrete®-3005 is especially suitable for the ▪ A very high level of water reduction, which can reach
following cases: 20% to 30% depending on the dosage and
composition; this results in concrete with a strong
▪ Concrete of a class equal to or greater than C30/37, increase in mechanical resistance, high compactness
with any consistency, in which it is intended to and very low permeability
obtain a large saving of cement ▪ An intense plasticizing effect, allowing to obtain,
▪ Very plastic, fluid or even self-compacting (BAC) even with a strong reduction of water, favorable
concrete with improved initial strength and at a consistencies for easy laying
lower cost ▪ Good consistency maintenance, which can last
▪ Faster concreting in cold weather for 2 hours at 20 °C, depending on the type of
▪ Prefabrication of structural concrete, in factory or in situ cement, initial consistency and adjuvant dosage
CERTIFICATES / STANDARDS
Admixture for concrete according to EN 934-2, Table 3.1
and 3.2 and supplied with CE marking.
PRODUCT DATA
chemical base Aqueous solution of modified polycarboxylates
1/3
storage time 12 months after production date
Storage and conservation Store in unopened original packaging in a dry place at temperatures
between +5 and +35 °C. Protect away from direct sunlight.
Density 1.05 ± 0.02 kg/l (at +20°C)
TECHNICAL DATA
concreting guide Sika® ViscoCrete®-3005 allows the manufacture of quality concrete,
therefore good practice rules for the manufacture, placement and curing of
concrete must be adhered to.
APPLICATION INFORMATION
recommended dosage Depending on the intended purpose, it is recommended to start from the following dosages:
▪ Sika®IronGard®901
▪ Sika®Pump
▪ Sika®Rapid 1
▪ Sikacrete®
LOCAL RESTRICTIONS
2/3
Please note that the performance of this product LEGAL NOTE
may vary slightly from country to country,
depending on locale-specific regulatory The information, and in particular the
parameters. Please consult the Product Data recommendations relating to the application and
Sheet for a complete description of the fields of end use of Sika products, are provided in good faith
application. and based on knowledge and experience of the
products when properly stored, handled and applied
ECOLOGY, HEALTH AND SAFETY under normal conditions, and in accordance with
Sika's recommendations. Sika. In practice,
For information and advice on the safe handling, differences in the state of materials, surfaces, and
storage and disposal of chemicals, users should application conditions on site are so unpredictable
refer to their latest Safety Data Sheets (SDS) that no guarantees regarding merchantability or
containing physical, ecological, toxicological and fitness for a particular purpose, nor any liability
other safety-related data. arising from any legal relationship, can be be
inferred from this information, or from any written
recommendation, or from any other advice given.
The product must be tested to assess its suitability
for the application and intended purposes. Third
party property rights must be observed. All accepted
orders are subject to our current conditions of sale
and delivery. Users should always consult the most
recent and specific version of our Product Data
Sheet to which it relates, and which will be delivered
whenever requested.
Sika Portugal, SA
Rua de Santarém, 113
4400-292 VN de Gaia
Tel.: +351 223 776 900
prt.sika.com
SikaViscoCrete-3005-pt-PT-(03-2018)-1-1.pdf
3/3