Type
[Ship's Name
FIMD-3200, FMD-3300, FMD-3100
Title
[Calculation of CPAITCPA on ECDIS.
Contents
(Can not operate the CPA/TCPA of NAV tolls box and can not display the CPA/TCPA value
without RADAR connection on FMD Ver3.XX and later.
Because IEC61174 Ed.4 Chapter 4.6.1 prohibits that ECDIS tracks the target(TT&AIS) and
calculates CPA/TCPA, it shall be done by RADAR
ECDIS can display CPA/TCPA of target when get the information from interfaced RADAR by
TTD&TLB sentence.
Therefore CPA/TCPA value is displayed on ECDIS after acquiring the TT target or activating
AIS target at RADAR.
If AIS target is not activated at RADAR, ECDIS displays the AIS targat symbol as dashed
ines triangle
There is special setting for Calculate CPA/TCPA function on Common Installation setting
"Basic setting > ECDIS"
Please do not use this setting normally
If use it, ECDIS can calculate CPA/TCPA by ownself, but software displays that FMD complies
with IEC6 1174 Edd.
It violates 1EC01174 Ea4
This is for special request(claim) only
As Similar case,
The function of cursor color change in Night mode also should not use normally.
Because S-52 Annex A Presentation Library chapter 7.1.1 defines that the cursor color is
Jorange
[Category1
[General Information
Category?
Navigation
[Attachment