Professional Documents
Culture Documents
(Service Manual) SNP-6200RH Series - ENG-20160620
(Service Manual) SNP-6200RH Series - ENG-20160620
BASIC
SNP-6200RH
FAMILY
VPM-6200RH
SERVICE MANUAL
NETWORK CAMERA CONTENT
1. Precautions
2. Product Specification
4. Trouble Shooting
6. PCB Diagrams
7. Block Diagrams
8. Schematic Diagrams
9. JIG list
2. Product Specification
2-1 Product Specification 5
2-1-1 SNP-6200RH/VPM-6200RH 5
2-1-2 Key Feature 8
2-2 Option Product Specification 9
2-2-1 SNP-6200RH/VPM-6200RH 9
6. PCB Diagrams
6-1 Wiring Diagram 80
6-1-1 SNP-6200RH/VPM-6200RH 80
6-2 SNP-6200RH/VPM-6200RH 81
6-2-1 Interface PCB 81
6-2-2 Network PCB 83
6-2-3 Motion PCB 88
6-2-4 Ircont PCB 92
6-2-5 Irzoom PCB 94
6-2-6 Tilt Sensor PCB 95
6-2-7 SUB PCB 98
6-2-8 SD PCB 100
7. Block Diagrams
7-1 SNP-6200RH/VPM-6200RH 103
7-1-1 Internal structure and exterior design 103
7-1-2 Mian Block 104
7-1-3 Power Block 105
8. Schematic Diagrams
8-1 SNP-6200RH/VPM-6200RH 107
8-1-1 SMPS-01 107
8-1-2 SMPS-02 108
8-1-3 DAVINCI EMIF Interface, Nand (Network PCB) 109
8-1-4 DAVINCI DDR2 Interface (Network PCB) 110
8-1-5 DAVINCI Video_Audio Interface (Network PCB) 111
8-1-6 DAVINCI I_O Interface, MCBSP (Network PCB) 112
8-1-7 DAVINCI SD, USB, ADC (Network PCB) 113
CONTENTS
8-1-8 DAVINCI Emulation & Clock (Network PCB) 114
8-1-9 DAVINCI Power Pins (Network PCB) 115
8-1-10 DDR2 SDRAM (Network PCB) 116
8-1-11 Phyceiver (Network PCB) 117
8-1-12 CVBS/LVDS Video Output (Network PCB) 118
8-1-13 Audio Interface (Network PCB) 119
8-1-14 Power, RST, RTC (Network PCB) 120
8-1-15 Inout Cable con (Network PCB) 121
8-1-16 I2C EX~, DIP SW (Network PCB) 122
8-1-17 422/485 Control (Network PCB) 123
8-1-18 Motion-01 (Motion PCB) 124
8-1-19 Motion-02 (Motion PCB) 125
8-1-20 Ircont (Ircont PCB) 126
8-1-21 Irzoom (Irzoom PCB) 127
8-1-22 Tilt Sensor (Sensor PCB) 128
8-1-23 Zoom Module-01 (Sensor PCB) 129
8-1-24 Zoom Module-02 (Sensor PCB) 130
8-1-25 Zoom Module-03 (Sensor PCB) 131
8-1-26 Zoom Module-04 (Sensor PCB) 132
8-1-27 Zoom Module-05 (Sensor PCB) 133
8-1-28 SUB (SUB PCB) 134
8-1-29 SD (SD PCB) 135
9. JIG List
9-1 Firmware upgrade JIG List 136
9-2 Focus adjustment method using the focus chart 137
9-2-1 Tracking 138
1. Precautions
1-1 Safety Precautions
1) Before returning an instrument to the customer, Any measurements not within the limits specified
always make a safety check of the entire instrument, herein indicate a potential shock hazard that must
including, but not limited to, the following items: be eliminated before returning the instrument to
the customer.
(1) Be sure that no built-in protective devices are
defective or have been defeated during servicing.
(1)Protective shields are provided to protect both
the technician and the customer. Correctly replace
all missing protective shields, including any
removed for servicing convenience.
(2)When reinstalling the chassis and/or other
assembly in the cabinet, be sure to put back in place
all protective devices, including, but not limited to,
nonmetallic control knobs, insulating fish papers,
adjustment and compartment covers/shields, and
isolation resistor/capacitor networks. Do not operate
this instrument or permit it to be operated without
all protective devices correctly installed and
functioning.
Fig. 1-1 AC Leakage Test
(2) Be sure that there are no cabinet openings through (4) Insulation Resistance Test Cold Check-(1) Unplug
which adults or children might be able to insert the power supply cord and connect a jumper wire
their fingers and contact a hazardous voltage. Such between the two prongs of the plug. (2) Turn on the
openings include, but are not limited to, excessively power switch of the instrument. (3) Measure the
wide cabinet ventilation slots, and an improperly resistance with an ohmmeter between the
fitted and/or incorrectly secured cabinet back jumpered AC plug and all exposed metallic cabinet
cover. parts on the instrument, such as screwheads,
antenna, control shafts, handle brackets, etc. When
(3) Leakage Current Hot Check-With the instrument an exposed metallic part has a return path to the
completely reassembled, plug the AC line cord chassis, the reading should be between 1 and 5.2
directly into a 230V(220V ~ 240V) AC outlet. (Do megohm. When there is no return path to the chassis,
not use an isolation transformer during this test.) the reading must be infinite. If the reading is
Use a leakage current tester or a metering system not within the limits specified, there is the possibility
that complies with American National Standardsp of a shock hazard, and the instrument must be
institute (ANSI) C101.1 Leakage Current for repaired and rechecked before it is returned to the
Appliances and Underwriters Laboratories (UL) customer. See Fig. 1-2.
1270 (40.7). With the instrument’s AC switch first in
the ON position and then in the OFF position,
measure from a known earth ground
(metal water pipe,
conduit, etc.) to all exposed metal parts of the
instrument (antennas, handle brackets, metal
cabinets,
screwheads, metallic overlays, control shafts,
etc.), especially any exposed metal parts that offer
an electrical return path to the chassis.
Any current measured must not exceed 0.5mA.
Reverse the instrument power cord plug in the outlet
and repeat the test. See Fig. 1-1.
Fig. 1-2 Insulation Resistance Test
Samsung Page 1
Precautions
2) Read and comply with all caution and safety related 5) Components, parts, and/or wiring that appear to
notes on or inside the cabinet, or on the chassis. have overheated or that are otherwise damaged
should be replaced with components, parts and/ or
3) Design Alteration Warning-Do not alter or add to wiring that meet original specifications.
the mechanical or electrical design of this Additionally, determine the cause of overheating
instrument. and/or damage and, if necessary, take corrective
Design alterations and additions, including action to remove any potential safety hazard.
but not limited to, circuit modifications and the
addition of items such as auxiliary audio output 6) Product Safety Notice-Some electrical and mechanical
connections, might alter the safety characteristics of parts have special safety-related characteristics
this instrument and create a hazard to the user. Any which are often not evident from visual inspection,
design alterations or additions will make you, the nor can the protection they give necessarily be
servicer, responsible for personal injury or property obtained by replacing them with components rated
damage resulting therefrom. for higher voltage, wattage, etc. Parts that have
special safety characteristics are identified by
4) Observe original lead dress. Take extra care to shading,
assure correct lead dress in the following areas: an ( )or a ( )on schematics and parts lists. Use
(1) near sharp edges, (2) near thermally hot parts (be of a substitute replacement that does not have the
sure that leads and components do not touch same safety characteristics as the recommended
thermally replacement part might create shock, fire and/or
hot parts), (3) the AC supply, (4) high voltage, other hazards. Product safety is under review
and (5) antenna wiring. Always inspect in all areas continuously and new instructions are issued
for pinched, out-of-place, or frayed wiring, Do not whenever appropriate.
change spacing between a component and the
printed-circuit board. Check the AC power cord for
damage.
Samsung Page 2
Precautions
CAUTION : Before servicing units covered by this (4) An insulation tube or tape is sometimes used and
service manual and its supplements, read and follow some components are raised above the printed
the Safety Precautions section of this manual. wiring board for safety. The internal wiring is
Note : If unforseen circumstances create conflict sometimes clamped to prevent contact with heating
between the following servicing precautions and any components. Install such elements as they
of the safety precautions, always follow the safety pre- were.
cautions.
Remember: Safety First. (5) After servicing, always check that the removed
screws, components, and wiring have been installed
1-2-1 General Servicing Precautions correctly and that the portion around the
(1) a. Always unplug the instrument’s AC powercord serviced part has not been damaged and so on.
from the AC power source before (1) re-moving Further, check the insulation between the blades of
or reinstalling any component, circuit board, the attachment plug and accessible conductive
module or any other instrument assembly, (2) parts.
disconnecting any instrument electrical plug or
other electrical connection, (3) connecting a test
substitute in parallel with an electrolytic ca 1-2-2 Insulation Checking Procedure
pacitor in the instrument.
Disconnect the attachment plug from the AC outlet
b. Do not defeat any plug/socket B+ voltage and turn the power ON. Connect the insulation resist-
interlocks with which instruments covered by ance meter (500V) to the blades of the attachment
this service manual might be equipped. plug. The insulation resistance between each blade of
the attachment plug and accessible conductive
c. Do not apply AC power to this instrument and parts(see note) should be more than 1 Megohm.
/or any of its electrical assemblies unless all
solid-state device heat sinks are correctly installed. Note : Accessible conductive parts include metal panels,
input terminals, earphone jacks, etc.
d. Always connect a test instrument’s ground lead
to the instrument chassis ground before connecting
the test instrument positive lead. Always
remove the test instrument ground lead last.
Samsung Page 3
Precautions
Samsung Page 4
2. Product Specification
2-1 Product Specification
2-1-1 SNP-6200RH/VPM-6200RH
Description
Items
SNP-6200RH VPM-6200RH
Image
Samsung Page 5
Product Specification
Description
Items
SNP-6200RH VPM-6200RH
Image
Samsung Page 6
Product Specification
Description
Items
SNP-6200RH VPM-6200RH
Image
Samsung Page 7
Product Specification
q Multi-Streaming
This network camera can display videos in different resolutions and qualities
simultaneously using different CODECs.
q Alarm
If an event occurs, the event-related video will be transferred to the FTP/email specified
by the user or saved to the SD memory, or the event signal will be sent to the Alarm Out port.
q Tampering Detection
Detects tempering attempts on video monitoring.
q Motion Detection
Detects motion from the camera’s video input.
q Face Detection
Detects faces from the camera’s video input.
q Audio Detection
Detects sound louder than a certain level specified by user.
q ONVIF Compliance
This product supports ONVIF. For more information, refer to www.onvif.org.
Samsung Page 8
Product Specification
Power Adaptor
Z4404008601A 1 SA
(AC 24V, 6A)
Hexagon screw : 3
Hexagon screw, L Wrench AM09-000034A 1 SA
L Wrench : 1
Samsung Page 9
Disassembly and Reassembly
1) Remove 3 Screws q.
2) Remove Install Base w.
q 3 SCREWS
w INSTALL BASE
Samsung Page 10
Disassembly and Reassembly
3-1-2 Interface Bracket Removal
1) Remove 2 Screws q.
2) Remove Interface Bracket w.
3) Remove Interface HINGE e.
4) Remove 1 Screw r.
5) Remove Interface Lock t.
q 2 SCREWS
e INTERFACE HINGE
w INTERFACE BRACKET
r 1 SCREWS
t INTERFACE LOCK
Samsung Page 11
Disassembly and Reassembly
3-1-3 Interface PCB Removal
1) Remove 4 Screws q.
2) Remove Interface PCB w.
w INTERFACE PCB
q 4 SCREWS
Samsung Page 12
Disassembly and Reassembly
3-1-4 Cover Housing Removal
1) Remove 3 Screws q.
2) Remove Cover Housing w.
q 3 SCREWS
w COVER HOUSING
Samsung Page 13
Disassembly and Reassembly
3-1-5 Cover Dome In Removal
r COVER DOME IN
q 2 COVER SCREWS
w 2 SCREWS
e 2 SCREWS
Samsung Page 14
Disassembly and Reassembly
3-1-6 Ass'y Mecca Removal
1) Remove 1 Screw q.
2) Remove Bracket w.
3) Remove 4 Screws e, r.
4) Remove Ass'y Mecca t.
q 1 SCREW
w BRACKET
t ASS'Y MECCA
r 2 SCREWS
e 2 SCREWS
Samsung Page 15
Disassembly and Reassembly
3-1-7 Cover Lens Front & Rear Removal
1) Remove 4 Screws q, w.
2) Remove 4 Screws e, r.
3) Remove Cover Lens Front t.
4) Remove Cover Lens Rear y.
e 2 SCREWS
r 2 SCREWS
q 2 SCREWS
w 2 SCREWS
Samsung Page 16
Disassembly and Reassembly
3-1-8 Ass'y Camera IR Removal
1) Remove 4 Screws q.
2) Remove Camera FFC w.
3) Remove IR illuminator FFC e.
4) Remove Front Chassis r.
r FRONT CHASSIS
q 4 SCREWS
w CAMERA FFC
e IR illuminator FFC
Samsung Page 17
Disassembly and Reassembly
3-1-9 Ass'y Camera Bracket Removal
1) Remove 4 Screws q.
2) Remove Ass'y Camera Bracket w.
3) Remove Lens Packing e.
4) Remove Lens Clear Cover r.
q 4 SCREWS
e LENS PACKING
r LENS CLEAR COVER
Samsung Page 18
Disassembly and Reassembly
3-1-10 Camera Module Removal
1) Remove 4 Screws q.
2) Remove Camera Module w.
3) Remove Module Bracket e.
* Caution 1 : IR BRACKET-CAMERA GUIDE(FC09-000630A) the optical axis of IR luminous source and the zoom module.
Replace with the CAMERA ASSY (AM07-002929A, ASSY,HALF-CAMERA-BRACKET-SNP-6200RH/VPM-6200RH).
* Caution 2 : The calibration is required when replacing the relevant ASSY. (Refer to 4-3 Failure Diagnosis Calibration_Algorithm)
w CAMERA MODULE
q 3 SCREWS
e MODULE BRACKET
MODULE JIG
Samsung Page 19
Disassembly and Reassembly
3-1-10-a Camera Module
1. Material Information
1 Camera 1
3 Screw 3
4 Camera JIG 1
Samsung Page 20
Disassembly and Reassembly
Short
Flange
- Put the Camera JIG on the flat desk.
1
- check ‘Short Flange’ direction.
Samsung Page 21
Disassembly and Reassembly
8 - End.
Samsung Page 22
Disassembly and Reassembly
3-1-11 IR Illuminator Removal
1) Remove 2 Screws q.
2) Remove IR Illuminator w.
3) Remove Rubber Sheet e.
4) Remove Fan r.
* Caution : The calibration is required when replacing the relevant ASSY. (Refer to 4-3 Failure Diagnosis Calibration_Algorithm)
q 2 SCREWS
w IR Illuminator
e RUBBER SHEET
r FAN
Samsung Page 23
Disassembly and Reassembly
3-1-12 Ass'y Blower Removal
1) Remove 1 Screw q.
2) Remove Ass'y Blower w.
q 1 SCREW
w ASS'Y BLOWER
Samsung Page 24
Disassembly and Reassembly
3-1-13 Sub PCB Removal
1) Remove 5 Screws q.
2) Remove Side Cover w.
3) Remove FPC Cable e.
4) Remove Tilt Motor Connector r.
5) Remove Ass'y Heater Connector t.
6) Remove Sensor PCB y.
7) Remove Sub PCB u.
8) Remove Sub PCB Bracket i.
w SIDE COVER
y 2 SCREWS
Samsung Page 25
Disassembly and Reassembly
3-1-14 Ass'y Tilt Drive Removal
1) Remove 3 Screws q.
2) Remove 4 Screws w.
3) Remove Ass'y Tilt Drive e.
4) Remove Camera Packing r.
q 3 SCREWS
w 4SCREWS
Samsung Page 26
Disassembly and Reassembly
3-1-15 Sensor PCB Removal
1) Remove 2 Screws q.
2) Remove Sensor PCB w.
q 2 SCREWS
w SENSOR PCB
Samsung Page 27
Disassembly and Reassembly
3-1-16 Tilt Side Cover Removal
1) Remove 5 Screws q.
2) Remove Tilt Side Cover w.
q 5 SCREWS
Samsung Page 28
Disassembly and Reassembly
3-1-17 FFC Removal
1) Remove 2 Screws q.
2) Remove FFC Cover w.
3) Remove FFC Cable e.
4) Remove FFC Holder r.
q 2 SCREWS
r FFC HOLDER
e FFC CABLE
w FFC COVER
Samsung Page 29
Disassembly and Reassembly
3-1-18 Ass'y Tilt Drive Removal -01
1) Remove 2 Screws q.
2) Remove Balt w.
3) Remove Gear e.
4) Remove Tilt Left r.
q 2 SCREWS
e GEAR
r TILT LEFT
w BALT
Samsung Page 30
Disassembly and Reassembly
3-1-19 Ass'y Tilt Drive Removal -02
1) Remove 1 Screw q.
2) Remove Bearing w.
3) Remove 2 Screws e.
4) Remove Motor r.
5) Remove Gasket t.
q 1 SCREW
w BEARING
e 2 SCREWS
r GASKET
r MOTOR
Fig 3-19 Ass'y Tilt Drive Removal -02
Samsung Page 31
Disassembly and Reassembly
3-1-20 Motion PCB Removal
1) Remove 2 Screws q.
2) Remove Motion PCB w.
q 2 SCREWS
w MOTION PCB
Samsung Page 32
Disassembly and Reassembly
3-1-21 Ass'y Fan Motor Removal
1) Remove 2 Screws q.
2) Remove Motor w.
3) Remove Belt e.
4) Remove 2 Screws r.
5) Remove Bracket t.
q 2 SCREWS
w MOTOR
e BELT
r 2 SCREWS
t BRACKET
Samsung Page 33
Disassembly and Reassembly
3-1-22 Ass'y Fan Removal
1) Remove 3 Screws q.
2) Remove Ass'y Fan w.
3) Remove 3 Screws e.
4) Remove Gear r.
q 3 SCREWS
r GEAR
w ASS'Y FAN
e 3 SCREWS
Samsung Page 34
Disassembly and Reassembly
3-1-23 Fan Base Removal
1) Remove Washer q.
2) Remove Fan Bracket w.
3) Remove Gasket e.
4) Remove Fan Base r.
q WASHER
w FAN BRACKET
e GASKET
r FAN BASE
Samsung Page 35
Disassembly and Reassembly
3-1-24 Housing Body Removal
1) Remove 3 Screws q.
2) Remove 1 Screw w.
3) Remove Safety Wire e.
4) Remove Shield Housing r.
q 3 SCREWS
r SHIELD HOUSING
e SAFETY WIRE
w 1 SCREW
Samsung Page 36
Disassembly and Reassembly
3-1-25 Ass'y Body Removal
1) Remove 4 Screws q.
2) Remove Ass'y Body w.
q 4 SCREWS
w ASS'Y BODY
Samsung Page 37
Disassembly and Reassembly
3-1-26 Inner PCB Removal
1) Remove 2 Screws q.
2) Remove Inner PCB w.
q 2 SCREWS
w INNER PCB
Samsung Page 38
Disassembly and Reassembly
3-1-27 Body Removal
1) Remove 2 Screws q.
2) Remove Connector 22Pin w.
3) Remove 3 Screws e.
4) Remove Plate r.
5) Remove Bracket Install Out t.
6) Remove 3 Screws y.
7) Remove 3 Guide Pin u.
e 3 SCREWS
r PLATE
w CONNECTOR 22PIN
q 2 SCREWS
u 3 GUIDE PIN
y 3 SCREWS
Samsung Page 39
Disassembly and Reassembly
3-1-28 SMPS PCB Removal
1) Remove Gasket q.
2) Remove 3 Screws w.
3) Remove SMPS PCB e.
e SMPS PCB
w 3 SCREWS
q GASKET
Samsung Page 40
Disassembly and Reassembly
3-1-29 Ass'y Heater Removal
1) Remove 2 Screws q.
2) Remove Ass'y Heater w.
w ASS'Y HEATER
q 2 SCREWS
Samsung Page 41
Disassembly and Reassembly
3-1-30 Heater Removal
1) Remove 2 Screws q.
2) Remove Heater w.
3) Remove 2 Screws e.
4) Remove Sensor r.
5) Remove 2 Screws t.
6) Remove Fan y.
q 2 SCREWS
w HEATER
e 2 SCREWS
r SENSOR
y FAN
t 2 SCREWS
Fig 3-30 Heater Removal
Samsung Page 42
Disassembly and Reassembly
3-1-31 SLIP-RING Removal
1) Remove 3 Screws q.
2) Remove SLIP-RING w.
w SLIP-RING
q 3 SCREWS
Samsung Page 43
Disassembly and Reassembly
3-1-32 SD PCB Removal
1) Remove 3 Screws q, w.
2) Remove SD Holder Bracket e.
3) Remove SD Packing r.
4) Remove 2 Screws t.
5) Remove SD PCB y.
w 2 SCREWS
* Note: Do not remove the screw completely.
e SD HOLDER BRACKET
y SD PCB
t 2 SCREWS
r SD PACKING
q 1 SCREW
Samsung Page 44
4. Trouble Shooting
4-2-1 User---------------------------------------------------------------------------------------------------------------------------- 51
4-3 Calibration_Algorithm----------------------------------------------------------------------------------- 55
4-4-1 Input process of MAC & Serial when replacing the NETWORK PBA--------------------- 63
Samsung Page 45
Trouble Shooting
Is the power No
connected Check the input AC voltage is 24V
properly? and the connection of the power terminals.
Yes
Is the out- No
put at the rated voltage Replace the adaptor.
of the Adaptor?
Yes
Yes
Are the
+1.35V, +1.8V, Check the power voltage for each TP
No
+3.3V and +5V outputs of the Net- the voltage input.
work PCB proper? TP in the adjacent area of IC9 and IC10
+1.35V, +1.8V, +3.3V, +5V.
Yes
Normal operation
Samsung Page 46
Trouble Shooting
Yes
Yes
Is
the output No When the power does not turn on,
voltage from the check the Routine in "The power is not
Regulator proper? normal."
Yes
Yes
Yes
Samsung Page 47
Trouble Shooting
q XT1 _ 24MHz
IC1
IC700
IC4
2200NF
IC3
100NF/16V
100NF/16V
Z0902021001A_DM368
C808
C811
C805
33OHM
IC13 IC6
IC700 13 of 14
6-3 Netwotk PCB
H3 RESET VDDMXI L6
DGND
F4 TCK
10PF
F2 RTCK MXI1 L1 C809
CN800
3
2
24MHZ
833OHM F5
HOT
GND
TDI
7RN804
XT1
6
5 G4 TDO
GND
HOT
DGND
833OHM G2
4
1
TMS
7RN805
6 DGND 10PF
5 H5 TRST MXO1 K1 C810
Fig 4-1
U18-13
IC1 Trouble Shooting
IC2
IC700
IC4
q XT1100 _ 25MHz
IC3
IC13 IC6
L1100
10UH IC1100
VCC_+3.3V
100NF/16V
33
32
31
30
29
28
27
26
25
C1104
C1109
KSZ804
10000NF
CN800
R1100 C1102
49.9OHM
MGND
RST#
SPEED
NWAYEN
CRS
COL
TXD3
TXD2
TXD1
100NF/16V 6-3 Netwotk PCB
1 AGND TXD0 24
R1101 DGND 2 VDD1.8 TXEN 23
49.9OHM
X0 VDD3.3
REXT
RXD3
RXD2
RXD1
RXD0
MDIO
MDO
3
2
X1
C1103
R1103 0.022NF
49.9OHM
HOT
GND
XT1100
9
10
11
12
13
14
15
16
DGND
DGND
DGND
GND
HOT
25MHZ
4
1
C1105
0.022NF
C1106
R1105
6.49K
0.1NF
7-12 Phyceiver (Network PCB)
DGND
Fig 4-2
: Z2801015401A
Samsung
-> EP10-000677 DGND
Page 49
Trouble Shooting
IC13
IC2
IC700
q Y1000 _ 27MHz
CN6
IC3
IC13
6-3 Netwotk PCB IC
Y1000
27MHZ
Z2804015701A
BD1006
1 C_V VCC 4 VCC_+3.3V
60OHM
2 3 C1014
GND OUT
100NF/16V
(3225)
DGND
DGND
BD1007 C1007 B_DR
60OHM
100NF/16V B_DX
VCC_+3.3V R14 B_FSR
0OHM
NC B_FSX
BD9
VCC+3.3V_A R15 0OHM B_CLKR
C1017 B_CLKX
10000NF
220OHM
C5<> SCL_3.3V
DGND
R1034
5C3<> SDA_3.3V
C5<>
TLV320AIC3101 VCC_+1.8V
IC2
C1019
1000NF
8
7
6
5
4
3
2
1
DOUT
SCL
DIN
WCLK
BCLK
MLCK
IOVDD
DVSS
MGND 33 DGND
R1002 C1003 9 SDA 32
100NF/16V DVDD
5.6KOHM 10 7-14 Audio Interface (Network PCB)
MIC1LP/LINE1LP
/RESET 31 RESET_3.3V#
11 MIC1LM/LINE1LM 30
5.6KOHM
100NF/16V
12 Fig 4-3 RIGHT_LOM
47UF
R154 C20 MIC1RP/LINE1RP
RIGHT_LOP 29 C1006 AUDI
13
100NF/16VSamsung 28 Page 50
MIC1RM/LINE1RM
330OHM
14
LEFT_LOM
47UF
C60 R47 MIC2R/LINE2L/MICDET
LEFT_LOP 27 C1008 AUDI
15 MICBIAS 26
AVSS2 BD1004
16 MIC2L/LINE2R NC
Trouble Shooting
The default password of the product has the risk of disclosure. Therefore, change it to a new password immediately after installing the
product. The user is responsible for security and any other problems due to unchanged default password. Cautions should be taken.
If you change the password in the multiple access status with the same PC, the browser may operate abnormally. Connect again before
changing the password.
Fig. 4-4
Samsung Page 51
Trouble Shooting
2) Guest Setting : When <Guest Access> is permitted, the user who accessed the web viewer screen with the
guest account can only see the live
viewer screen.
The guest ID and password are <guest/guest> and cannot be modified.
3) RTSP access permission without authentication : Allows you to access RTSP without logging in and see im
ages when <Use> is selected.
4) Current user : Allows you to change the user information and set the account permission when <Use> is
selected.
- Video : Allows you to select the registered profile from the live view screen.
- Audio input : Allows you to use the audio input button from the live view screen.
- Control : Allows you to control PTZ, Mic and the alarm button.
Samsung Page 52
Trouble Shooting
Fig. 4-5
When the camera is initialized, IP connection setting will return to DHCP as the default setting. At this time, when the DHCP server is
not detected, IP connection setting will be changed to the previous setting automatically.
3) Setting backup & restoration : Performs the backup of the settings and the restoration of default settings.
After defauilt settings are restored, the system will restart automatically.
4) Restart : Restarts the system.
Samsung Page 53
Trouble Shooting
Fig. 4-7
Fig. 4-8
Fig. 4-9
When you run backup or restoration, the web browser will be closed and the camera will reboot.
Samsung Page 54
Trouble Shooting
4-3 Calibration_Algorithm
4-3-1 Pan/Tilt Calibration
The example shown in Figure 4-10 shows the partial compensation of tilt (Between 0 and 360, not 0 and 180
in case of the pan)
Fig. 4-10
1. After booting complete, moving this window until the chart shows.
Setting the chart and the product within PT location is on Tilt degrees 0 to 90.
Fig. 4-11
Samsung Page 55
Trouble Shooting
2. Run Web browser
3. On Web browser address bar
Input ‘http://<Camera IP>/cgi-bin/adv/factory.cgi?operation=211‘ (Calibration Command CGI)
Fig. 4-12
- After entering the command, the red-cross is appeared on the centre of the display.
Fig. 4-13
* Caution : Is the product installation, please run under normal conditions. (Figure 1.)
If it is not a normal condition, the calibration is done correctly. (Figure 2.)
Samsung Page 56
Trouble Shooting
4. Move to Full Tele(x20) of Zoom.
Fig. 4-16
Fig. 4-17
Fig. 4-18
Samsung Page 57
Trouble Shooting
After then, Pan/Tilt is flipped. (each PT is 180 degrees rotated)
In common operating, CALIBRATION mark shows on the bottom of the display.
If the original location is Tilt 90 degrees over, the Tilt is automatically flipped within 90 degrees. (Re-adjustment)
Fig. 4-19
Fig. 4-20
Samsung Page 58
Trouble Shooting
8. Calibration End : On Web browser address bar
Input ‘http://<Camera IP>/cgi-bin/adv/factory.cgi?operation=209’
Fig. 4-21
Fig. 4-22
Samsung Page 59
Trouble Shooting
Calibration/Accuracy Testing :
Check accuracy with automatically rotating 180 degrees per 2 seconds. ( 3times repeat)
Check Origin / Flip of horizontal line. (Tilt) (Getting out of Pan direction is OK!)
3회 반복!
Fig. 4-23
Calibration/Accuracy Testing :
- The Accuracy is positioned within the rectangle based on the 0.2 degrees the innermost
when the chart is released 1m from camera.
- When the red-cross comes back to the original position of Accuracy while Flipping,
check the centre of red-cross is on normative range.
0.2º
Origin
Samsung Page 60
Trouble Shooting
Cauition
Why Origin and Flip are different is the camera of the mechanic’s location is not centre.
- Matching based on released distance from the Tilt’s central axis of the camera.
Samsung Page 61
Trouble Shooting
SNP-6200RH/VPM-6200RH Calibration Sheet
Flip
0.2º
0.2º
Origin
Fig. 4-26
Samsung Page 62
Trouble Shooting
Fig. 4-27
Samsung Page 63
Trouble Shooting
3. Enter the following CGI command on the address input window of the Web page and click Enter.
When OK is confirmed as shown in the figure, turn the power off.
CGI Command :
http://<ipaddr>/cgi-bin/adv/factory.cgi?mac=00:00:00:00:00:00&sn=00000000000000
ex) MAC : 00:16:6C:7C6F:1F, Serial Number : 123456789ABCDE, IP Address : 192.168.10.59
Fig. 4-28
Samsung Page 64
Trouble Shooting
4. Turn the power on again and check if the MAC address has been changed from IP Installer.
Fig. 4-29
5. Access the Web page and check the serial number of the production information from the Setup page.
Fig. 4-30
Samsung Page 65
Trouble Shooting
q w
Fig 4-31
Item Description
JIG
▶ JIG Page Shortcut
PC
e After Service Port (A/S port)
Fig 4-32
Samsung Page 66
Trouble Shooting
Fig 4-33
Click button No. 1 (Browse) in Figure 33 to designate the path of uImage, ramdisk, and work files.
The followings are examples.
Fig 4-34
Samsung Page 67
Trouble Shooting
Click select box No. 2 (server interface) in Figure 33 to set the IP band to that of the camera the user is
using.
When the camera IP used for the network camera is 192.168.17.xxx, the IP of 192.168.17.xxx should be
selected in the select box. To confirm this, check the variable in the boot loader shown in Figure 35 below.
As for the method for seeing boot loader parameter, turn on the camera and hit Enter key, then the screen
as shown in Figure 35 appears on the serial window. Figure 35 is shown below. (It shows the method for
using Putty COMx.)
Bootloader commands can be seen by inputting pri at WN3> as shown below. Here, ipaddr, serverip, gate-
wayip, kernel_filename, etc. can be varied according to the situation of a user. If the user wants to change
ipaddr, input commands as follows.
WN3>setenv ipaddr 192.168.17.189
Fig 4-35
Samsung Page 68
Trouble Shooting
//If a server and the camera IP are to be changed, input the PC IP for the server where TFTP32.exe is
activated.
setenv ipaddr '192.168.17.189';
setenv serverip '192.168.17.211';
setenv gatewayip '192.168.17.1'
Now, input ‘run update_all’ at WN3 > window, then update is performed as follows.
Fig 4-36
Samsung Page 69
Trouble Shooting
Fig 4-37
Lastly, when all updates have been completed, input the command, WN3>boot, and turn on and off the power.
Samsung Page 70
5. Exploded View and Parts List
5-1 SNP-6200RH/VPM-6200RH--------------------------------------------------------------------------- 72
5-1-1 Camera----------------------------------------------------------------------------------------------------------------------- 75
Samsung Page 71
Exploded Views and Parts List
5-1 SNP-6200RH/VPM-6200RH
Samsung Page 72
Exploded Views and Parts List
Samsung Page 73
Exploded Views and Parts List
Samsung Page 74
Exploded Views and Parts List
5-1-1 Camera
Samsung Page 75
Exploded Views and Parts List
Samsung Page 76
Exploded Views and Parts List
Samsung Page 77
Exploded Views and Parts List
Samsung Page 78
6. PCB Diagrams
• You can search text in the PDF file and find the necessary information by using search (Ctrl+F).
6-2 SNP-6200RH/VPM-6200RH------------------------------------------------------------------------------------- 81
6-2-8 SD PCB----------------------------------------------------------------------------------------------------------------------------------100
Samsung Page 79
PCB Diagrams
1 AC24S
2 GND
3 AC24R
1 AUX_COM
2 AUX_NO
3 AGND
4 422_RXD-
5 422_RXD+
6 485_TXD-
7 485_TXD+
1 VENC_1
2 AGND
Samsung Page 80
PCB Diagrams
6-2 SNP-6200RH/VPM-6200RH
6-2-1 Interface PCB
COMPONENT SIDE
LOC.NO X-Y
J14 A-1
J5 B-2
J1 C-2
J4 D-2
J15 E-1
J15
J4 J1 J5 J14
Samsung Page 81
PCB Diagrams
CONDUCTOR SIDE
Samsung Page 82
PCB Diagrams
COMPONENT SIDE
LOC.NO X-Y
IC4 A-1
IC1 A-2
CN800 B-0
IC6 B-0
CN4 IC13 B-1
IC700 B-1
q XT1 _ 24MHz IC10 B-3
IC9 B-3
IC9 IC3 C-1
IC2 C-2
IC8 C-2
CN4 C-4
IC10
CN5
CN6 D-1
IC13 D-2
CN1 E-1
w XT1100 _ 25MHz CN7 E-2
IC17
IC18 E-2
IC15 IC7 E-2
IC15 E-2
IC8
IC7 IC17 E-2
CN5 E-3
CN7
IC18
IC1
IC13
IC2
IC700 e Y1000 _ 27MHz
TP72 : 1.35V
IC3
y
u TP73 : 1.8V
IC13 IC6
CN800
Samsung Page 83
PCB Diagrams
CONDUCTOR SIDE
SW3
U3 U1
CN2 CN3
IC202
IC16
IC14
IC11
SW2 IC12
Samsung Page 84
PCB Diagrams
Samsung Page 85
PCB Diagrams
Samsung Page 86
PCB Diagrams
Samsung Page 87
PCB Diagrams
COMPONENT SIDE
LOC.NO X-Y
CN2 B-0
IC1 B-1
U201 B-1
U201 B-1
CN1 B-1
U204
CN1
CN3
U2
J931
U201
IC1
U301
CN2
Samsung Page 88
PCB Diagrams
CONDUCTOR SIDE
LOC.NO X-Y
U3 A-2
U203 B-2
U1 C-0
IC2 D-1
U203
U3
IC2
U1
Samsung Page 89
PCB Diagrams
Samsung Page 90
PCB Diagrams
Samsung Page 91
PCB Diagrams
COMPONENT SIDE
LOC.NO X-Y
J973 A-1
U201 A-1
U101 B-1
U302 C-1
U301 D-2
J975 D-0
U301 U302 U201
J973
J975
U101
Samsung Page 92
PCB Diagrams
CONDUCTOR SIDE
Samsung Page 93
PCB Diagrams
COMPONENT SIDE
J972
CONDUCTOR SIDE
Samsung Page 94
PCB Diagrams
COMPONENT SIDE
LOC.NO X-Y
J978 A-1
K501 C-0
K511 C-0
U404 C-1
K521 D-0
J979 D-2
J980 D-2
J980
J979
U404
J978
Samsung Page 95
PCB Diagrams
CONDUCTOR SIDE
LOC.NO X-Y
U601 A-1
CN1 A-2
U602 B-1
J982 D-0
U620 D-1
CN1
U602
U620
U601
J982
Samsung Page 96
PCB Diagrams
Samsung Page 97
PCB Diagrams
J932
J933
CN1
J990 J989
LOC.NO X-Y
J933 A-1
CN1 A-1
J990 B-1
J932 C-1
Samsung Page 98
PCB Diagrams
Samsung Page 99
PCB Diagrams
6-2-8 SD PCB
CN2
CN1
SW1
7. Block Diagrams
7-1 SNP-6200RH/VPM-6200RH
7-1-1 Internal structure and exterior design
INSTALL BASE
HOUSING
SLIP RING
MECHA BLOCK
PAN BLOCK
TILT BLOCK
Public
Public
Only
8. Schematic Diagrams
8-1 SNP-6200RH/VPM-6200RH------------------------------------------------------------------------- 103 8-1-22 Tilt Sensor (Sensor PCB)--------------------------------------------------------------------------------------- 124
8-1-3 DAVINCI EMIF Interface, Nand (Network PCB)------------------------------------------------------ 105 8-1-25 Zoom Module-03 (Sensor PCB)---------------------------------------------------------------------------- 127
8-1-4 DAVINCI DDR2 Interface (Network PCB)--------------------------------------------------------------- 106 8-1-26 Zoom Module-04 (Sensor PCB)---------------------------------------------------------------------------- 128
8-1-5 DAVINCI Video_Audio Interface (Network PCB)--------------------------------------------------- 107 8-1-27 Zoom Module-05 (Sensor PCB)---------------------------------------------------------------------------- 129
8-1-6 DAVINCI I_O Interface, MCBSP (Network PCB)----------------------------------------------------- 108 8-1-28 SUB (SUB PCB)------------------------------------------------------------------------------------------------------- 130
8-1-7 DAVINCI SD, USB, ADC (Network PCB)------------------------------------------------------------------- 109 8-1-29 SD (SD PCB)------------------------------------------------------------------------------------------------------------ 131
8-1-15 Inout Cable con (Network PCB)---------------------------------------------------------------------------- 117 Important safety notices :
Components identified with the mark have the special characteristics for safety. When replacing any of these
components. Use only the same type.
8-1-16 I2C EX~, DIP SW (Network PCB)--------------------------------------------------------------------------- 118
8-1 SNP-6200RH/VPM-6200RH
8-1-1 SMPS-01
! ! !
C204 R221 C221 BD201
F201 C202 C203 3216 3216
LF201 D201,202,203,204 1KV 102K BFD3550
250V4A 60V6A*4 50V3300uF*2 103K T201_EER3019 10J
CH940120
+12V_A
!
R222
R207 2012
1W 1KJ
100K 6 R227
CON1 2 2012
SMW200-06P 10J
R201 R203
1 AC_+24V 1
TNR201 CF201 7.5K 7.5K PC202/A
2 AC_+24V
3 AC_+24V
7D680 105J 4 D221 817
D207 R224
1
4 AC_-24V 1KV 4 100V
HS1M R223 2012
5 AC_-24V 10A 2012 3.9KF
6 AC_-24V 3 10K
C223 R228
2
R202 R204 16V
7.5K 7.5K 1/2W1KJ C226
680uF
C224 16V
7,8,9 2012 220uF
104K
Q201
200V30A 10,11,12
D205 C222
1N4148W 16V
680uF
U202
431
R206 R210 R225 R226
3216 2012 R211 CHIP 2012 2012
20K 20R 2012 100KF 1KF
47R
GND_A
R212
2012 R214,218
10K
1W0.22J*2
R213
2012 R2
R208 470R C2
U201 OB2201 1W0.05
2012 102
150K +12V_A
8 6
RT VDD
R4 R6
1 5 D206 D208 R216 270 16K
RI GATE 3216 R8
1N4148W HS1M
10 82
2 7
FB DEM 1
R217 U2
4 3 C210 2012 R10
GND CS
R215 2012 150K 270 1 8
2012 100J
PC202/B
817 C206 30K
4
2 7
C205 R209 2012 2 UCC29002
2012 C207
101K 2012 821K 2012 3 6
20K 104K
3
R12 4 5
C4 C6 C8
16K
102 474 106
GND_A
C208 C209
50V47uF 50V47uF C200 R1
C1
472 1W0.05
+12V_B
102
CON6 R3 R5
YAW396-02V 270 16K
!
AC24V
AC24V
R7
U1 82 +12V
F1 R9
TH1 CON4
250V4A 270 1 8 GND
ITS005003F SMW200-02P
AC24V
AGND 2 7
UCC29002
CF1 TNR1 3 6
CON3 CON5
105J 7D680 YW200-12P 53047-0210
R11 4
1 GND 1 +12V
C3 C5 5 C7
16K
2 GND 2 GND
102 474 106
3 GND GND_B
4 GND
5 GND
6 +12V_A B회로_R124,_R127
7 +12V_A
8 +12V_B
9 GND
10 GND
11 GND
12 GND
13 GND
14 GND
8-1-2 SMPS-02
! ! !
C104 R121 C121 BD101
F101 C102 C103 3216 3216
LF101 D101,102,103,104 1KV 102K BFD3550
250V4A 50V3300uF*2 103K T101_EER3019 10J
CH940120 60V6A*4
+12V_B
! R105
R107
1W
6 R122
100K 2012 R127
CON1 10K(3216) 2
1KJ 2012
SMW200-06P R101 R103 10J
1 AC_+24V 7.5K R129
TNR101 CF101 1 7.5K
2 AC_+24V D121 10K TRIG
3 AC_+24V
7D680 105J 4 PC102/A
1KV D107 100V
4 AC_-24V HS1M 4 10A 817 R124
PC101/A
1
5 AC_-24V 2012
817 3 R104 R123 3.9KF
1
6 AC_-24V C123
ZD101 R102 2012
16V 10K R128
15V 7.5K 7.5K
2
680uF 1/2W1KJ C126
4
16V
2
3
104K
Q101
200V30A 10,11,12 Q102
D105 C122
16V 2222A_CHIP
1N4148W
680uF
U102 R130
431
R106 R110 R125 R126 10K
3216 2012 R111 CHIP 2012 2012
20K 20R 2012 100KF 1KF
47R
GND_B
R112
2012 R114,118
10K
1W0.25J*2
R113
2012
R108 470R U2_#5
2012 U101 OB2201
150K 8 6
RT VDD
C108 C109
50V47uF 50V47uF C100
472
Power 33OHM
IC700 5 of 14 130201_2 LIB UPDATE COMPLETED
2E1<> EM_WAIT R50 J18 EM_WAIT/GIO052/HRDY
20KOHM
P18 EM_D15/GIO64/HD15 EM_A13/GIO78/BTSEL(2) V18 1 R35 8
P16 EM_D14/GIO63/HD16 EM_A12/GIO77/BTSEL(1) U18 2 7
P19 EM_D13/GIO62/HD17 EM_A11/GIO76/BTSEL(0) V19 3 6
P15 EM_D12/GIO61/HD18 EM_A10/GIO75/AECFG(2) U19 4 5
N16 EM_D11/GIO60/HD11 EM_A09/GIO74/AECFG(1) T18 1 R59 8 20KOHM
N18 EM_D10/GIO59/HD10 EM_A08/GIO073/AECFG(0) T19 2 7
N19 EM_D09/GIO58/HD9 EM_A07/GIO072/KEYA3 T17 3 6
N15 EM_D08/GIO57/HD8 EM_A06/GIO071/KEYA2 R18 4 5
DGND
2E4<> EM_D7 1 822OHM L16 EM_D07/HD7 EM_A05/GIO070/KEYA1 R16
2E4<> EM_D1 2 7R32 L18 EM_D06/HD6 EM_A04/GIO069/KEYA0 R19
2E4<> EM_D4 3 6 L19 EM_D05/HD5 EM_A03/GIO068/KEYB3 R15
2E4<> EM_D3 4 5 L15 EM_D04/HD4 EM_A02HCNTLA M18 1 8 EM_A2 2E1<>
2 7 EM_A1 2E1<>
2E4<> EM_D6 1 822OHM K15 EM_D03/HD3 EM_A01/HHWIL M19 3 6
2E4<> EM_D5 2 7R33 K19 EM_D02/HD2 EM_A00/GIO67/KEYB2/HCNTLB L17 4 5
2E4<> EM_D0 3 6 K16 EM_D01/HD1 EM_BA1/GIO66/KEYB1/HINTN R17
2E4<> EM_D2 4 5 K18 EM_D00/HD0 EM_BA0/EM_A14/GIO65/KEYB0 P17 33OHM
R42
EM_CLK/GIO050 M15
EM_ADV/GIO051/HRWN M16
R36
EM_CE0/GIO56/HCS M17
VCC_+3.3V
10KOHM
10KOHM
100NF/16V
8
7
6
5
8
7
6
5
C64
C66
R21
R34
10000NF
1 U3 48
NC NC28
1
2
3
4
1
2
3
4
2 NC1 NC27 47
3 NC2 NC26 46
4 NC3 NC25 45 DGND
5 NC4 I/O7 44 EM_D7 2B2<>
6 NC5 I/O6 43 EM_D6 2B2<>
2B2<> EM_WAIT 7 /RB I/O5 42 EM_D5 2C2<>
2C5<> EM_OE 8 /R I/O4 41 EM_D4 2B2<>
2C5<> EM_CE0 9 /E NC24 40
10 NC6 NC23 39
11 NC7 NC22 38
130215 EM_CE1 NET REMOVE 12 VDD VDD 37
13 VSS VSS 36
14 NC8 NC21 35
15 NC9 NC20 34
2B5<> EM_A2 16 CL NC19 33 DGND
2B5<> EM_A1 17 AL I/O3 32 EM_D3 2B2<>
2C5<> EM_WE 18 /W I/O2 31 EM_D2 2C2<>
19 /WP I/O1 30 EM_D1 2B2<>
20 NC10 I/O0 29 EM_D0 2C2<>
21 NC11 NC18 28
22 NC12 NC17 27
23 NC13 NC16 26
24 NC14 NC15 25
DGND K9F1G08U0D-SCB0
Power 130129
CHANGE TO DDR T SAME AS 5300
TMS320DM368ZCEF
IC700 4 of 14
9E2<> MDDR_D15 V6 DDR_DQ15 DDR_A13 T16 MDDR_A13 9B5<> 9E5<>
DDR_A12 V17 MDDR_A12 9B5<> 9E5<>
9D2<> MDDR_D14 V7 DDR_DQ14 DDR_A11 W18 MDDR_A11 9B5<> 9E5<>
DDR_A10 V16 MDDR_A10 9B5<> 9E5<>
9D2<> MDDR_D13 R7 DDR_DQ13
R411
NC
T8
NC
DDR_DQGATE0
10OHM VCC_+1.8V_REF
DGND
R407
R408
U18-4 C400
100NF 100NF
C22
DGND DGND
DGND DGND
IC700 9 of 14
E10 VDDA33_VC MICIP B8
D9 VSSA33_VC MICIN C8
LINEO C9
VCOM A8
E9 VDDA18_VC SPP B9
F9 VSSA18_VC SPN A9 DGND
U18-9 TMS320DM368ZCEF
DGND
IC700 1 of 14
11C7> Y7 C12 YIN7/GIO103/SPI3_SCLK
11C7> Y6 A13 YIN6/GIO102/SPI3_SIMO
11C7> Y5 B13 YIN5/GIO101/SPI3_SCS(0)
11C7> Y4 D12 YIN4/GIO100/SPI3_SOMI/SPI3_SCS(1)
11C7> Y3 A14 YIN3/GIO99
11C7> Y2 B15 YIN2/GIO98
11C7> Y1 D14 YIN1/GIO97
11C7> Y0 D15 YIN0/GIO96
C14 HD/GIO95
B14 VD/GIO94
E13 C_WE_FIELD/GIO93/CLKOUT0/USBDRVVBUS
U18-1
TMS320DM368ZCEF
VCC_+3.3V
Power
10KOHM
10KOHM
R634
Z0902021001A_DM368
2.2KOHM
2.2KOHM
R635
R145
R146
IC700 6 of 14
GIO21/UART1_RTS/I2C_SDA F3 SDA_3.3V 12B3<> 13E8<> 15A5<> 15C3<> 15C5<>
10KOHM
VCC_+3.3V GIO2/MDIO
NC
B5 D6 MDC
GIO0 GIO1/MDCLK 10D6<
Z0902021001A_DM368
R151
R764
U18-6 NC
NC
IC700 2 of 14
B18 R152 MICOM_HW_RST 14F5<
R4
VCLK/GIO79
GIO81(OSCCFG)/LCD_FIELD/R2/PWM3 C18
C19
1KOHM
LCD_OE/GIO082
VSYNC/GIO83 G18
G15 SELF_RST 13F3<
R5
VCC_+3.3V HSYNC/GIO84
20KOHM
INT2 R95 0OHM YOUT7(R7) G16
15A4> G19
YOUT6(R6)
R75
YOUT5(R5) F15
15C1> INT3 R96 0OHM
YOUT4(R4) F18
YOUT3(R3) F16
YOUT2(G7) F19
YOUT1(G6) F17
YOUT0(G5) E16
DGND
100NF U18-2
C3
DGND
Power
Z0902021001A_DM368
IC700 8 of 14
14C1<> SD_CLK J16 MMCSD0_CLK
H18 MMCSD0_DATA0
T6 GIO043/MMCSD1_CLK/EM_A20
R6 GIO042/MMCSD1_CMD/EM_A19
W5 GIO041/MMCSD1_DATA3/EM_A18
U5 GIO040/MMCSD1_DATA2/EM_A17
VCC_+1.8V VCC_+3.3V
R5 GIO039/MMCSD1_DATA1/EM_A16
V5 GIO038/MMCSD1_DATA0/EM_A15
Z0902021001A_DM368
IC700 7 of 14
18-8 P4 VDDA33_USB
P3 VSSA33_USB USB_VBUS N2
N5 P1
Z0902021001A_DM368 VDDA18_USB USB_DM
IC700 10 of 14
E8 ADC_CH0
D8
100NF/16V
ADC_CH3
C824
U18-7
DGND DGND DGND
Power
120807
C808,C931,C934,C941,C945 -> 0.1UF
VCC_+1.8V
2200NF
100NF/16V
100NF/16V
Z0902021001A_DM368
C808
C811
C805
IC700 13 of 14
RESET_3.3V# R800 33OHM H3 L6
16B7< 16A7< 12B6< 13F3> RESET VDDMXI
DGND
F4 TCK
VCC_+3.3V 10PF
12505WR
CN800
F2 RTCK MXI1 L1 C809
3
2
24MHZ
MGND1 1 1 833OHM F5
HOT
GND
1 TDI
MGND1 2 2 2 7RN804
XT1
3 3 3 6
4 4 4 5 G4 TDO
GND
HOT
5 5 DGND
6
6
7 1 833OHM G2
4
1
7 TMS
8 8 2 7RN805
9 9 3 6 DGND 10PF
MGND2
10 10 4 5 H5 TRST MXO1 K1 C810
MGND2
G5 EMU0
H4 EMU1 VSS_MX1 L2
DGND
U18-13
R812 2.2KOHM
q XT1 _ 24MHz
DGND
130129
Power
CHANGE TO DDR T SAME AS 5300
120807
1. C959, C960 REMOVE Z0902021001A_DM368
2. C962, C966 1UF->0.1UF
33OHM IC700 14 of 14 60OHM
VCC_+1.35V BD2 G6 CVDD1 VDDS33_1 F10 BD10 VCC_+3.3V
G8 F6
2
2
CVDD2 VDDS33_2
2200NF
H7 F7
ICVN1005A150FR
CVDD3 VDDS33_3
2
H8 H6 10000NF
10000NF
ICVN1005A150FR
CVDD4 VDDS33_4
C914
VR8
H12 H13
VR4
CVDD5 VDDS33_5
C990
C946
C949
C952
C954
C956
C957
C962
C966
C933
C935
C936
C922
J8 L12
1
100NF
100NF
1000NF
1000NF
1000NF
1000NF
1000NF
1000NF
1000NF
1000NF
1000NF
CVDD6 VDDS33_6
1
J12 CVDD7 VDDS33_7 N6
1
J14 P5
1
CVDD8 VDDS33_8
K8 CVDD9 VDDS33_9 P6
K12 CVDD10 DGND
DGND L13 CVDD11
M6 CVDD12 60OHM
M10 CVDD13 BD1 VCC_+1.8V
M12
2
CVDD14
M13 C925
ICVN1005A150FR
CVDD15
10000NF
2
100NF/16V
VR10
C923
1
120807
C808,C931,C934,C941,C945 -> 0.1UF
1
VCC_+1.8V BD6 60OHM G14 VDDS18_1 VDDA18_PLL N4
H11
2
DGND
VDDS18_2
H14 60OHM
C901 VDDS18_3 R3 BD15
100NF/16V
100NF/16V
VCC_+1.35V
2
J7 VPP
C931
10000NF
2
VDDS18_4
C934
VR5
M14 VDDS18_5 C918 C926
ICVN1005A150FR
P7
1
1NF 10000NF
2
VDDS18_6
VR9
ICVN1005A150FR
1
DGND C915
1000NF
1
VCC_+1.8V BD7 60OHM E5 VDDS18_7/VDD18_SLDO VDDRAM1 D4
2
DGND
C902
10000NF 100NF
Z0902021001A_DM368
2
DGND
VR7
N9 A1
C912
VDD18_DDR1 RSV0 IC700
N11 R1 12 of 14
1
VDD18_DDR2 RSV1
VCC_DDR2_+1.8V ICVN1005A150FR P9 VDD18_DDR3 RSV2 R4 A19 VSS1
1
P10 VDD18_DDR4 E14 VSS2
DGND P12 VDD18_DDR5 F14 VSS3
R12 VDD18_DDR6 G11 VSS4
G12
2
VSS5
H9 VSS6
ICVN1005A150FR
H10
2
10000NF
10000NF
10000NF
10000NF
VSS7
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
J9
VR3
VSS8
P14 J10
C903
C51
C52
C53
C54
C55
C56
C71
C72
C73
C74
C941
C945
VDD_AEMIF1_18_33_1 VSS9
1
C48
C49
C50
VDD_AEMIF2_18_33_1 VSS11
L14 VDD_AEMIF2_18_33_2 K9 VSS12
F12 VDD_ISIF18_33_1 K10 VSS13
VCC_+3.3V BD8 60OHM F13 VDD_ISIF18_33_2 K11 VSS14
DGND L7
2
VSS15
L8 VSS16
U18-14
ICVN1005A150FR
L9
2
VSS17
C904 U18-15 L10
C961
C963
VR6
VSS18
10NF
10NF
M7 VSS20
M8
1
VSS21
M9 VSS22
M11 VSS23
N8 VSS24
DGND N12 VSS25
N14 VSS26
P8 VSS27
P13 VSS28
W1 VSS29
W19 VSS30
U18-12
DGND
120807
Power PRE-SI TUNNING 130129
220NF
VDDL WE
CHANGE TANTAL TO MLCC
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
A9 VDDQ0 CK0 E8 MDDR_CLK_P 3D6<> 9E5<>
C1 VDDQ1 CK1 F8 MDDR_CLK_N 3D6<> 9E5<>
C3 VDDQ2
C7 VDDQ3 VREF E2 VCC_+1.8V_REF
C9 VDDQ4
VSS0 A3
DGND A7 VSSQ0 VSS1 E3 121215
B2 VSSQ1 VSS2 J1
B8 VSSQ2 VSS3 K9 DELETE RESISTORS FOR MDDR_AX ETC
D2 VSSQ3
D8 VSSQ4 VSSDL E7
DGND DGND
120809
NETNAME CHANGE : MMDR_CS_N -> MDDR_CS
K4T1G084QF-BCE7
IC4
C24
C26
C28
C31
C39
C41
C43
C45
C47
C58
R44 1KOHM
E1 F3
CHANGE TANTAL TO MLCC 3D6<> 9C5<>
220NF
VDDL WE
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
MDDR_CLK_P 121207
100NF/16V
100NF/16V
A9 VDDQ0 CK0 E8 3D6<> 9C5<>
MDDR_CLK_N
C62
C774
C1 F8
C3
VDDQ1
VDDQ2
CK1 3D6<> 9C5<>
ADD CAP ON DDR VREF
C7 VDDQ3 VREF E2
C9 VDDQ4
NC
R45 1KOHM
VSS0 A3
A7 E3
100NF/16V
VSSQ0 VSS1
100NF/16V
DGND B2 VSSQ1 VSS2 J1 R74
C63
C775
B8 VSSQ2 VSS3 K9
D2 VSSQ3
D8 E7
VSSQ4 VSSDL
121030
CHANGE 100OHM TO NC
DGND
DGND DGND
Power VCC_+3.3V
10KOHM
R1104
ACT 14C4<>
LINK10/100 14C6<>
1 822OHM CRS 5D5<>
10000NF
2 7R10 COL 5D5<>
3 6
4 5
C1110
TXD3 5C5<>
TXD2 5C5<>
DGND TXD1 5C5<>
VCC_+3.3V
L1100
10UH IC1100
VCC_+3.3V
100NF/16V
4.7KOHM
33
32
31
30
29
28
27
26
25
RD-
C1104
C1109
14B6<>
KSZ8041NL1
10000NF
R1110
R1100 C1102
49.9OHM
MGND
RST#
SPEED
NWAYEN
CRS
COL
TXD3
TXD2
TXD1
100NF/16V
C1100
DIFFERENTIAL PAIR 100NF/16V 1 AGND TXD0 24 TXD0 5C5<>
R1101 DGND 2 VDD1.8 TXEN 23 TXEN 5C5<>
49.9OHM
X0 VDD3.3 VCC_+3.3V
10UH
C1101
100NF/16V 130414
REXT
RXD3
RXD2
RXD1
RXD0
MDIO
MDO
DIFFERENTIAL PAIR
ADD L5
3
2
X1
C1103
R1103 C1107 C1108
0.022NF
49.9OHM
100NF/16V 22000NF
HOT
GND
XT1100
9
10
11
12
13
14
15
16
DGND
TD+
14C6<>
DGND 1 822OHM DGND RXD0 5D5<>
DGND 2 7R11 RXD1
GND
5C5<>
HOT
3 6 RXD2 5C5<>
4 5 RXD3 5C5<>
25MHZ
4
1
MDC 5D5<>
C1105 MDIO 5D5<>
0.022NF
C1106
R1105
6.49K
0.1NF
DGND R1114
4.7KOHM
120807
XT1100 : Z2801015401A -> EP10-000677 DGND
VCC_+3.3V
q XT1100 _ 25MHz
Power Z0902021001A_DM368
68OHM
68OHM
IC700 3 of 14
68OHM
A10 TVOUT COMPPR C11
VCC_+3.3V
R3868OHM
B10 VFB COMPY B12
R39
R40
R41
B11 IDACOUT COMPPB A12
2200NF
100NF/16V
100NF/16V
100NF/16V
100NF/16V
TXCLKOUT+ 14E5>
C171
C101
C103
C105
C109
TXCLKOUT- 14E5>
TXOUT2+ 14D5>
A11 IREF TXOUT2- 14D5>
TXOUT1+ 14E5>
DGND TXOUT1-
DGND DGND 14E5>
DSP_GND D10 VDDA18_DAC TXOUT0+ 14E5>
THC63LVD104C TXOUT0- 14E5>
IC3
E11 VSSA18_DAC
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
DGND
C188
0OHM
R123
E12 VDDA12_DAC DSP_GND 100NF/16V
PVCC
PGND
RE+
RE-
RD+
RD-
LGND
RCLK+
RCLK-
RC+
RC-
LVCC
RB+
RB-
RA+
RA-
1 GND VCC 48
F11 VSSA12_DAC VCC_+3.3V 10KOHM 2 TEST RA0 47 1 833OHMY0 4E3<>
R103 3 PD RA1 46 2 7R138 Y1 4E3<>
R104 10KOHM 4 OE RA2 45 3 6 Y2 4E3<>
D11 VREF R107 5 R/F GND3 44 4 5 Y3 4E3<>
10KOHM 6 43
RE6 RA3
U18-3 7 RE5 RA4 42 1 833OHMY4 4E3<>
8 RE4 RA5 41 2 7R139 Y5 4D3<>
9 VCC3 RA6 40 3 6 Y6 4D3<>
10 RE3 RB0 39 4 5 Y7 4D3<>
11 RE2 RB1 38
12 RE1 VCC1 37
13 RE0 RB2 36
DSP_GND 14 RD6 RB3 35
15 RD5 RB4 34
16 GND1 RB5 33
CLKOUT
GND2
VCC2
RD4
RD2
RD1
RD0
RC6
RC5
RC4
RC1
RC0
RE3
RV3
RV2
RB6
BD703
60OHM
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
DGND DSP_GND
VCC_+3.3V
DGND
100NF/16V
100NF/16V
100NF/16V
100NF/16V
C100
C102
C104
C108
R135 33OHM PCLK 4F3<>
1 833OHM C0 4E3<>
2 7RN105 C1 4E3<>
DGND 3 6 C2 4E3<>
4 5 C3 4E3<>
1 833OHM C4 4E3<>
2 7RN106 C5 4E3<>
3 6 C6 4E3<>
4 5 C7 4E3<>
NC
NC
C35
C36
DGND
Y1000
60OHM
C1014
2 GND OUT 3
100NF/16V
(3225)
DGND
DGND
BD1007 C1007 B_DR 5C1<>
60OHM
100NF/16V B_DX 5C1<>
VCC_+3.3V VCC_+3.3V R14 B_FSR
0OHM 5C1<>
NC B_FSX 5C1<>
100NF/16V BD9
VCC+3.3V_A R15 0OHM B_CLKR 5C1<>
C1017 B_CLKX 5C1<>
10000NF
220OHM
10000NF
C18
C19
15C3<> 15B5<> 13E8<> 5C5<> SCL_3.3V
15C5<> DGND
R1034
74VC1G66GW
IC5 15C5<> 15C3<> SDA_3.3V
5 VCC Y 1 13E8<> 5C5<>
DGND 15A5<>
2
Z
TLV320AIC3101 VCC_+1.8V
MICBIAS_EN 4 3 IC2
5D1> E GND
C1019
1000NF
8
7
6
5
4
3
2
1
DOUT
SCL
DIN
WCLK
BCLK
MLCK
IOVDD
DVSS
DGND
MGND 33 DGND
R1002 C1003 9 SDA 32
100NF/16V DVDD
AUDIO_IN 5.6KOHM 10
14C3< 14E2> MIC1LP/LINE1LP 31 RESET_3.3V#
/RESET 13F3> 7B2< 16A7< 16B7<
11 MIC1LM/LINE1LM 30
5.6KOHM
100NF/16V
12
RIGHT_LOM
47UF
R154 C20 MIC1RP/LINE1RP
RIGHT_LOP 29 C1006 AUDIO_OUT_R 14E2> 14B3<
13 MIC1RM/LINE1RM 28
100NF/16V 330OHM
14
LEFT_LOM
47UF
C60 R47 MIC2R/LINE2L/MICDET
LEFT_LOP 27 C1008 AUDIO_OUT_L 14E2> 14B3<
R37 15 MICBIAS 26
AVSS2 BD1004
10KOHM 16 MIC2L/LINE2R 25 NC
AVDD_1 VCC_+3.3V
DRVDD_1
DRVDD_2
DRVSS_1
HPRCOM
HPLCOM
HPROUT
HPLOUT
AVSS1
R48
5.6KOHM
60OHM VCC+3.3V_A
C1009
100NF/16V
BD12
10000NF
5.6KOHM 0.22NF
C1023
R155
C1024
17
18
19
20
21
22
23
24
0.22NF
100NF/16V
100NF/16V
C61
C65
C67
DGND
DGND
DGND
BD13 NC
VCC_+3.3V
100NF/16V
10000NF
C1010
C1054
DGND q Y1000 _ 27MHz
DGND
VCC_+5V
VCC+3.3V_A
MIC5205YM
IC8
1 IN OUT 5
BD11 60OHM 2 GND
270KOHM
3 EN ADJ 4
10000NF
C8
R78
0.47NF
DGND
470KOHM
C6
R79
DGND DGND DGND
Z0902021001A_DM368
VCC_+1.35V IC700 11 of 14
RTCXO H1
MSS1P4 J6 VDD12_PRTCSS1
D16 K7 VDD12_PRTCSS2
1608 C804
100NF/16V
RTCXI G1 R20 10KOHM
VIN_DC_+12V BD4 2 2 1 1
VSS_32K H2
K6
SC2440TETRT
IC9
VDD18_PRTCSS
100NF
TP70
17 DGND DGND
16
MGND
BOOST1 1 C83 3.3UH
15
FB1
SW1 2 L1 VCC_+3.3V PWCTRO0 K2 TP8K2
14
COMP1
IN1 3 VCC_+1.8V
13
PGOOD1
SYNC 4 PWCTRO1 L5 TP8L5
TP71
12
SS1
ROSC 5
11
SS2
IN2 6 3.3UH PWCTRO2 L4 TP8L4
PGOOD2
7 100NF L3 VCC_+5V C803
.47NF
10 COMP2
SW2
8 C85 100NF/16V L3
9 BOOST2 D20 PWCTRO3 TP8L3
FB2
2 1
C10
2 1
.47NF
MSS1P4 CHANGE 5V PWCTRIO0 J3 1 810KOHM
DGND 2 7R17
15KOHM
J2 3 6
2
C70
MSS1P4
MSS1P4
22NF
22NF
10PF
10PF
PWCTRIO1
22NF
2
4 5
22UF
22UF
0.22NF
40.2KOHM
12KOHM
J1
47UF
10UF
23.2KOHM
PWCTRIO2
47UF
0.22NF
C11
C13
C33
C68
D14
D17
R80
15KOHM
C97
J5
C93
C94
R84
PWCTRIO3
C81
C87
C91
C98
R86
R90
C88
R82
J4
1
PWCTRIO4
1
1 810KOHM
PWCTRIO5 K5 2 7R19
3 6
10KOHM
K4 4 5
10KOHM
PWCTRIO6
M3 PWRST PWRCNTON M2
R91
TP8M3 TP8M2
U18-11
R87
DGND
1608 MSS1P4
VIN_DC_+12V BD5 D18
2 2 1 1
SC2440TETRT
IC10
TP72
17 100NF
16
MGND
BOOST1 1 C84 33UH
15
FB1
SW1 2 L2 VCC_+1.35V
14
COMP1
IN1 3 VCC_+3.3V
13
PGOOD1
SYNC 4
TP73
12
SS1
ROSC 5
11
SS2
IN2 6 33UH
10
PGOOD2
SW2 7 100NF L4 VCC_+1.8V
8 D21
10000NF
COMP2
C86
9 BOOST2
100NF
.47NF
FB2
2 1
C15
C16
2 1
130414
.47NF
MSS1P4
C12
2
ADD TANTAL ON 1.8V
MSS1P4
MSS1P4
22NF
22NF
10PF
10PF
10UF
2
12KOHM
C78
22UF
47UF
C34
C59
C69
C77
130415
47UF
22UF
4.3KOHM
D15
D19
15KOHM
0.22NF
0.22NF
C82
R85
10KOHM
CHANGE TANTAL TO MLCC
DGND
15KOHM
C88,C98,C90,C118
C89
DS3232
R81
R88
C90
C92
C95
C96
R92
1
C118
R83
IC6
1
R89
R93
3 18
12KOHM
12KOHM
32KHZ SCL
4 VCC SDA 17 SDA_3.3V 5C5<> 12B3<> 15A5<> 15C3<>
5 INT/ VBAT 16 15C5<>
6 RST/ GND 15 VCC_+3.3V
DGND 7 NC2 NC9 14
8 NC3 NC8 13
9 NC4 NC7 12
10 NC5 NC6 11
1
DGND
1
DGND
560OHM
SDS511
D1
130414
1
BAT1
ML614R TT31
CHANGE THE VALUE OF R217 TO 10KOHM
R16
DGND
2
2
R221
2
10KOHM
10KOHM
VCC_+3.3V
2
C218 R217
10KOHM
R215
100NF/16V IC202
TPS3808G09DBVR
6 VDD /RST 1 RESET_3.3V# 7B2< 12B6< 16A7< 16B7< DGND
5 SEN GND 2 R216
4 3 SELF_RST VCC_+3.3V
CT /MR 5E8< VCC_+1.8V VCC_+1.35V
DGND 33OHM
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
100NF/16V
C222
C219
C223
C224
C113
C114
C115
C116
C240
C241
C242
1000NF
C246
C247
C248
C243
C244
C245
DGND
DGND DGND
DGND DGND
22P
Power Video Audio
VCC_+5V VCC_+3.3V
CN3
SMW200-14P 130411 1 1
CN5 1 2 2
1
2 CHANGE CN5 TO STRAIGHT TYPE 3 3
2
3 4 4
3
4 DGND 130510 AC24V- AC24V+ 5 5
4
5 CHANGE PIN I/F FOR CN5 6 6
5 VIN_DC_+12V 7
6 6 8
7
7 7 9
8
8 9
8
9 121129 10 10
9 11
10 10 12V MERGE 12
11
11 11 13
12
12 AC24V- 13
12
13 14 14
13
14 15C3> AUX_RLY 15 15
TP34 TP36 TP38 TP40 TP42 TP44
14
AC24V+ 16E7<> 16D4<> 15E7<> RS422- ALM_IN1 16
CSA70-301L-T
CSA70-301L-T
CSA70-301L-T
CSA70-301L-T
CSA70-301L-T
CSA70-301L-T
16
16E7<> 16D4<> 15E4<> RS422+ 17 17
VCC_+3.3V ALM_IN2 18 18
TP35 TP37 TP39 TP41 TP43 TP45
16E4<> 16D7<> 15E7<> RS485- 19 19
16E4<> 16D7<> 15E4<> RS485+ ALM_IN3 20 20
21
2P2P2P2P2P
SU2 SU3 SU5 SU7 SU9
ALM_IN4 22
21
22
11
11
11
11
11
SSSSS
22P ALM_IN4
22
22
22
22
22
CN2
ALM_IN3
C79
C99
C107
C111
C112
C117
12505WS-15 1 DGND
CN1
2
1 ALM_IN2
1 1 3
2 ALM_IN1
2 DGND 3
2 16 4
15C3< FACTORY_RST 3 3
15C3> ALM_OUT1 5
4
4 5
SD_DATA0 5
4 MGND1
15C3> ALM_OUT2 6 6 2P2P2P2P
6B2<>
SD_DATA1 6
5
10C2> RD- 7 SU13 SU15 SU16 SU18
11
11
11
11
7
6B2<>
SD_DATA2 7
6
14E2> 12C7> AUDIO_OUT_R 8
SSSS
8
6B2<>
6B2<> SD_DATA3 8
7
14E2> 12C7> AUDIO_OUT_L RD+ 9 9
8 10
SD_CMD 9 10
C121
C122
C123
C124
6B2<>
22
22
22
22
9 11
6A2<> SD_CLK 10 10 AUDIO_IN 12
11
CSA70-301L-T
CSA70-301L-T
CSA70-301L-T
CSA70-301L-T
11
5C6> UART0_TXD 12 12
10C2<
14
13
13 13 17 VIDEO_OUT TD+ 15
14
DGND
5E8> SD_WP 14 14
14E5>
16
15
15 16
15 MGND2
17 17 130414
22UF 18 18
LINK10/100 19
CSA70-301L-T
CSA70-301L-T
CSA70-301L-T
CSA70-301L-T
CSA70-301L-T
CSA70-301L-T
19
20 20
ADD SURGE ABSORBER
ACT FOR ALM_IN1~4
C75
10B6> 21 21
PG05BSESC
PG05BSESC
PG05BSESC
PG05BSESC
22 22
2P 2P 2P 2P 2P 2P 2P 2P 2P 2P 2P 2P
2 2
2 2
2 2
DGND
2
SU1 SU4 SU6 SU21 SU8 SU10 SU11 SU12 SU14 SU17 SU19 SU20
11
11
11
11
11
11
11
11
11
11
11
11
S S S S S S S S S S S S
D2
D3
D4
D5
PG05BSESC
PG05BSESC
PG05BSESC
PG05BSESC
22
22
22
22
22
22
22
22
22
22
22
22
R150 0OHM TO NC
2 2
2 2
2 2
C119
C120
C76
C80
C106
C110
2
1
D7
D8
D9
5
PG05BSESC
PG05BSESC
PG05BSESC
DGND U1
DGND
DGND
DGND RD+ 1
VCC
6 TD+
2 2
2 2
2
1
11
RD- ESD_protection_IO1ESD_protection_IO4
TD-
1
3 ESD_protection_IO2ESD_protection_IO3
4
DGND DGND DGND DGND
GND
D10
D11
D12
130414
ADD R147
DGND
2
R147
1
0OHM
1
TXCLKOUT- 13 13 D32
2
AUDIO_IN CONTROL_RXD 2 NC AUDIO_OUT_L
2
14 14 11
VR11
2
TXCLKOUT+
ICVN1005A150FR
11B7<
16 16 11 2 2 NC
1
D34
VIDEO_OUT
1
17 17 11 2 NC
2
2
VIDEO_OUT
1
14C3< 18 18
1
19 19
ICVN1005A150FR
VR2
20 MGND2
20
130405
1
MGND2
DGND
DGND 130524 CHANGE CONNECTOR
DGND
1
VIN_DC_+12V
DGND
CN4
1 1
NC 130405
CN7
1 CN7 WILL BE 3PIN WITH SAME TYPE
2 2
1
2
2
3 3
4 4 MICOM_HW_RST 5D7>
Power VCC_+3.3V
SET ADDR
VCC_+3.3V
1KOHM R130
NC R131
NC R132
10KOHM
1KOHM R133
R25
1KOHM R134
R136
NC PCZ8575
DGND IC12
5E1< INT2 1 INT VDD 24
2 AD1 SDA 23 SDA_3.3V 5C5<> 12B3<> 13E8<> 15C3<> 15C5<>
A0 : H 3 AD2 SCL 22 SCL_3.3V 5C5<> 12B3<> 13E8<> 15C3<> 15C5<>
4 21
A1 : L 5
P00 AD0
20 ID_SEL7
A2 : H 6
P01
P02
P17
P16 19 ID_SEL6
7 P03 P15 18 ID_SEL5
RESPONSE 8 P04 P14 17 ID_SEL4
9 P05 P13 16 ID_SEL3
10 P06 P12 15 ID_SEL2
TEST 11 P07 P11 14 ID_SEL1
12 VSS P10 13 ID_SEL0
100NF
NOT USE PORTS -> TIE GND
VCC_+3.3V SET ADDR
VCC_+3.3V
NC R124
C2
1KOHM R125
NC R126 VCC_+3.3V
1KOHM R127 DGND
10KOHM
NC R128
1KOHM R129
R6
10KOHM
DGND PCZ8575
R54
IC11
A0 : L 5E1< INT3 1 INT VDD 24 SDA_3.3V 5E1<
INT1 1 IC13 20 BAUD1
2 23 SCL_3.3V
INT* P7
BAUD2
A1 : L 3
AD1 SDA
22 SCL_3.3V
5C5<> 12B3<> 13E8<> 15A5<> 15C5<>
15C3<> 15B5<> 13E8<> 12B3<> 5C5<> 2 SCL P6 19
A2 : L ALM_IN1 4
AD2 SCL
21
5C5<> 12B3<> 13E8<> 15B5<> 15C5<> 3 NC NC 18
14A6>
ALM_IN2 5
P00 AD0
20 AUX_RLY 15C3<> 15A5<> 13E8<> 12B3<> 5C5<> SDA_3.3V 4 SDA P5 17 485_422
14B6>
14B6> ALM_IN3 6
P01 P17
19 ALM_OUT2
14A4<
14B3<
5 VDD P4 16 RESERVED
ALM_IN4 7
P02 P16
18 6 AD0 VSS 15
14B6>
14E4< M_GPIO1 8
P03 P15
17 7 AD1 P3 14 PROTOCOL4
M_GPIO2 9
P04 P14
16 ALM_OUT1 8 NC NC 13
14E4<
10
P05 P13
15
14B3< 9 AD2 P2 12 PROTOCOL3
11
P06
P07
P12
P11 14 PROTOCOL1 10 P0 P1 11 PROTOCOL2
12 VSS P10 13 FACTORY_RST 14B1< VCC_+3.3V
SET ADDR
R137NC 130604
100NF
100NF
R1401KOHM
R1411KOHM ADD NET TO GND FOR #15PIN
C29
R142NC
R143NC
C1
R144
1KOHM
A0 : L
DGND DGND A1 : H DGND
A2 : L
130414 VCC_+3.3V
R27,R28 NC
1KOHM
1KOHM
1KOHM
1KOHM
1KOHM
1KOHM
1KOHM
1KOHM
1KOHM
NC
NC
1KOHM
VCC_+3.3V
130405
MOVE THE NET OF RS422-,485-
KDS122S
R26
R27
R28
R29
R30
R31
R46
R49
R51
R52
R53
R55
PIN# 15,16 TO 14,15
1KOHM
1KOHM
1KOHM
1KOHM
1KOHM
1KOHM
1KOHM
1KOHM
RESERVED 12 13 120OHM
16E7<> 16D4<> 14A4<> RS422+ 12 11 14 13 R61 RS422- 14A4<> 16D4<> 16E7<>
16E4<> 16D7<> 14B4<> RS485+ 11 10 15 14 R62 RS485- 14B4<> 16D7<> 16E4<>
TEST 10 9 16 15 120OHM
RESPONSE 9 16
R1
R2
R3
R12
R18
R22
R23
R24
8 17
KSD82S 485_422 8 7 18 17
SW2 BAUD2 7 6 19 18
ID_SEL7 1 1 16 16 BAUD1 6 5 20 19
ID_SEL6 2 2 15 15 PROTOCOL4 5 4 21 20
ID_SEL5 3 3 14 14 PROTOCOL3 4 3 22 21
ID_SEL4 4 4 13 13 PROTOCOL2 3 2 23 22
ID_SEL3 5 5 12 12 PROTOCOL1 2 1 24 23
ID_SEL2 6 6 11 11 1 24
ID_SEL1 7 7 10 10
ID_SEL0 8 8 9 9 SW3
DGND
DGND
VCC_+3.3V
Power R100
R101
NC
NC
VCC_+3.3V
R102 NC NC
R105 NC SC16IS7401PW
IC14
1 VDD XTAL2 16
2 A0 XTAL1 15 R117 NC I2C_UART_CLK
DGND 3 14 R118 NC RESET_3.3V#
SET ADDR 4
A1 RESET
13 R119 NC CONTROL_RXD
13F3> 7B2< 12B6< 16B7<
14E4> 16C7<> 16D1<> 16D5<> 16E1<> 16E5<>
SCL_M CONTROL_TXD
N.C RX
16C4<> 6 11 R121 NC
IRQ1#
SDA CTS
NC
C14
1.8432MHZ NC
4 XT2
VDD OUTPUT
3 I2C_UART_CLK
1 STANDBY GND 2 DGND
100NF
VCC_+3.3V
NC
R76 NC
C7
VCC_+3.3V
R77 NC
R98 NC NC
DGND
R99 NC SC16IS7401PW
IC16
1 VDD XTAL2 16
SET ADDR 2 A0 XTAL1 15 R112 NC I2C_UART_CLK
DGND 3 14 R113 NC RESET_3.3V# 13F3> 7B2< 12B6< 16A7<
CONTROL_RXD
A1 RESET
16A4<> 6 11 R122 NC
IRQ2#
SDA CTS
7 10
PIN1 RO 5E7>
8
IRQ RTS
9
PIN2 NRE I2C VSS
NC
PIN8 VCC
C9
VCC_+5V
DGND
422
MAX13488E
220OHM
IC15
16E5<> 0OHM 1 8
CONTROL_RXD R43 RO VCC VCC_+5V
R72
16C7<> 16A7<> 14E4>
16E1<> 16D5<> 2 RE* B 7 RS422- 14A4<> 15E7<> 16E7<>
14E4< 16E5<> 0OHM 3 SHDN* A 6 RS422+ 14A4<> 15E4<> 16E7<>
16C7<> 16A7<> CONTROL_TXD R63
16E1<> 16D5<> 4 DI GND 5
NC
8P
IC18
220OHM
RO VCC
R66 485CTL 2 7 RS485-
C4
100NF
R68
NC
1KOHM
R68 220OHM -> NC
NC
DGND
R116
C21
DGND
DGND
CHANGE THE PART IC15,IC7 TO MAX13488 LIB 130527
VCC_+5V
VCC_+5V
485
MAX13488E
NC
220OHM
IC7
1 RO VCC 8 8P
16E5<>
CONTROL_RXD R64 0OHM
CONTROL_RXD NC IC17
R73
1KOHM
100NF
10KOHM
NC
R71
NC
100NF
R111
R67
C5
VCC_+5V
C17
CHANGE VALUE 130510
NC
DGND
DGND
2B7<>
2B7<>
Power +3.3V_MI 330OHM LED1
SNP-6200RH 1100 R231
1KOHM NC SNP-6201 1010 R232
330OHM LED2
R501 MODEL0 R505
2D3>
2E8>
2E8<
SNP-5300A 1110
1KOHM NC DGND SSC-YG101 SSC-YG101
1
R502 MODEL1 R506 LED231 LED232
1
NC 1KOHM TP-SMD TP-SMD TP-SMD
R503 MODEL2 R507 TP1 TP71 TP72
NC 1KOHM
C218100NF
C217100NF
R504 MODEL3 R508
TEMP_SENSE
2
2
TP71
TP72
+3.3V_MI
CAM_RST
TP1
DGND
M_GPIO1
M_GPIO2
MODEL0
MODEL1
MODEL2
MODEL3
+3.3V_MI +3.3V_MI
M_RXD
M_TXD
NJU7704F27A DGND DGND
100NF U203
1 5 TP1,TP72 : TEST MODE
CD VDD +3.3V_MI +3.3V
100
10KOHM
R224
TP72 : MANUFACTURE MODE
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
C225
C226
2 D201 CT201 C201CT202 L201 CIB05J100NC
100NF
VSS
2
L202 CIB05J100NC
RTCK
P0[3]_RXD0
P0[2]_TXD0
VSS6
VDD(3V3)_4
P1[0]
P1[1]
P1[4]
P1[8]
P1[9]
P1[10]
P1[14]
P1[15]
P1[16]
P1[17]
P4[29]_RXD3
VDD(REG)(3V3)_2
VSS5
P4[28]_TXD3
P0[4]
P0[5]
P0[6]
P0[7]
P0[8]
P0[9]
2A7> M_/RST_NW 3 4 M_/RST
ICVN1005A150FR
UCLAMP0501H
MR VOUT
100NF
JTDO 1 75 CONTROL_RXD
VR1
TDO P2[0]_TXD1 2C7<
33UF 33UF JTDI 2 74 CONTROL_TXD
C224
TDI P2[1]_RXD1 2C7>
1
100NF
JTMS 3 TMS P2[2] 73 TP71
JTRST 4 72
1
DGND TRST VSS3
1
JTCK 5 71 100NF C216
1
TCK VDD(3V3)_2
6 P0[26]_RXD3 P2[3] 70 TP12
DGND DGND 7 P0[25]_TXD3 P2[4] 69 TP1
8 P0[24] LPC1769FBD100 P2[5] 68 TP72
9 67 LED2
+3.3V_MI C211
100NF
10
P0[23]
VDDA
100P P2[6]
P2[7] 66 LED1
11 VSSA P2[8]_TXD2 65 NW_MOTION_RXD 2B7<
C212 12 VREFP P2[9]_RXD2 64 NW_MOTION_TXD 2B7>
1-128MHZ 100NF 13 NC P0[16] 63 EEP_CS
100NF 14 62 EEP_SCK
1 4 RSTOUT P0[15]_SCK
+3.3V_MO +3.3V 2
1
2 U2
4
3 3
C227
15
16
VREFN U201 P0[17]_MISO 61
60
EEP_SO
EEP_SI
OSC_IN RTCX1 P0[18]_MOSI
+3.3V_MO D301 CT301 C301CT302 L301 CIB05J100NC +3.3V
M_/RST 17 RESET P0[19]_SDA1 59 EEP_WP
18 58
2
RTCX2 P0[20]_DTR1
L302 CIB05J100NC 19 57 10KOHM
2
20 56
UCLAMP0501H
2
P1[31] P0[22]
100NF
21 55
VR2
P1[30] VSS4
33UF 33UF OSC_IN 22 54 100NF C215
+3.3V_MI XTAL1 VDD(3V3)_3
1
23 XTAL2 P2[10] 53
0OHM
VDD(REG)(3V3)_1
R338 2E8< 2D3<> M_SCL 24 52 TILT_HOME 2E5>
1
P0[27]_SDA0 P2[12]
VDD(3V3)_1
P0[0]_SDA1
P0[1]_SCL1
NC
P1[29]]
100KOHM
P3[26]
P3[25]
P0[29]
P0[30]
P1[18]
P1[19]
P1[20]
P1[21]
P1[22]
P1[23]
P1[24]
P1[25]
P1[26]
P1[27]
P1[28]
P0[10]
P0[11]
P2[13]
4.7KOHM
4.7KOHM
GND_M DGND
VSS1
VSS2
8
U1
EEP_SI 5 Vcc 2 EEP_SO
R4
R27
R5
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
D Q
EEP_SCK 6 C
100NF
C214100NF
EEP_CS 1 S*
MOTOR_TILT_PWM_2
MOTOR_TILT_PWM_1
MOTOR_PAN_PWM_2
MOTOR_PAN_PWM_1
3
C213
12505WS-04A EEP_WP
MOTOR_PHASE_1
MOTOR_PHASE_4
MOTOR_PHASE_2
MOTOR_PHASE_3
W*
IR_APSE
MOTOR_PAN_1
MOTOR_PAN_2
MOTOR_PAN_3
MOTOR_TILT_1
MOTOR_TILT_3
MOTOR_TILT_4
MOTOR_TILT_2
MOTOR_PAN_4
J931 7
IR_HOME
IR_BPSE
HOLD*
Vss 2E8<>
C425 PAN2A 1 1
MGND1
100KOHM
10NF 100NF 2E8<> 2E5>
C426 10NF PAN2B 2 2 MGND1 C228
4
C427 10NF PAN1B 3 3
C428 PAN1A 4 4
R28
10NF DGND
MGND2
MGND2
DGND DGND
GND_M
+12VA
GND_M
MOTOR_TILT_1
MOTOR_PAN_3
MOTOR_PAN_1
MOTOR_PAN_2
MOTOR_PAN_4
C316100NF
100NF
+12VA +12VA
C317
0OHM NC +3.3V_MI
220NF R435 L304
C312
15KOHM 0OHM NC R10 4.7KOHM CONTROL_TXD
GND_M MOTOR_PAN_PWM_1 VREF1 R1 R11 4.7KOHM CONTROL_RXD
37
36
35
34
33
32
31
30
29
28
R2
C322
R322
PAD
I03
I02
I01
CP2
CP1
VCP
GND2
I11
I12
C324
MOTOR_PHASE_4 MOTOR_TILT_4
R324
PHASE4 I14
PHASE3
PHASE2
PHASE1
47NF
33UF
FK2125T256AL
VREF1
VREF2
VREF3
VREF4
GND1
VDD
+3.3V_MO CE313
1 1
220NF 2 2
10
11
12
13
14
15
16
17
18
GND_M 3 3
C314 15KOHM
MOTOR_TILT_PWM_1 VREF3
E300
100NF
GND_M
GND_M R325 FK2125T256AL
MOTOR_PHASE_3
MOTOR_PHASE_2
MOTOR_PHASE_1
C315
15KOHM
C326
R326
1 1
47NF
2 2
3
VREF1
VREF2
VREF3
VREF4
GND_M E301
15KOHM
MOTOR_TILT_PWM_2 VREF4 GND_M DGND
R327
GND_M
15KOHM
C328
R328
47NF
GND_M
+3.3V_MI
10KOHM
10KOHM
10KOHM
10KOHM
TP-SMD
+12VB +12VA
TP3 12505WR
J921
1 MGND1
1 +12VB +12VA
R244
R243
R242
R241
JTRST 2 2 MGND1 TP4
3 3
TP-SMD
CE333 CE334 JTDI TP5
CE315 CE316 4 4 CN3
TP-SMD
100UF/25V 100UF/25V JTMS TP6
5 5 +12VA 1 1
TP-SMD
330UF 330UF JTCK TP7
6 6 +12VB 2 2
TP-SMD
TP8 3
7 7 3
TP-SMD
JTDO TP9
8 8 1B1< M_/RST_NW NC R234 4
TP-SMD
M_/RST TP10
9 9
TP-SMD
TP11 NC R24
100KOHM TP1210 MGND2
2
R245
TP-SMD
R120 DGND GND_M 10 TP12
TP-SMD
MGND2
10KOHM
D103
MP2305DS
10NF
BAS516
U102 DGND
+12VB
C122
4.7UH 1 BS SS 8 DGND
1
L103 2 7
10029WS-20
1
L104 IN EN
3 SW COMP 6
4 5 CN1
33UH GND FB
10000NF
TXOUT2- 1 MGND1
2
C120
+12VB 1
NW_MOTION_RXD
2
+5V 2 2
100NF
1B8>
2.2NF
3.3NF
MGND1
39KOHM 5.6KOHM +12V_CAM TXOUT2+ 3 3
MSS1P4
D104
R121 R122
NW_MOTION_TXD 4 4
C125
C124
C123
+5V 1B8<
1KOHM TXOUT1- 5 5
+5V DGND R25 +12VB 1A6<> M_GPIO1 6 6
10KOHM
10KOHM
+3.3V_MI TXOUT1+ 7 7
1
R124
10UF D2_1 ON_OFF 1KOHM
3 4 C5 10 10
C121
D2_2 S2
TXOUT0+ 11 11
IC2 100NF CONTROL_TXD 12 12
DGND C3 1B8<
DGND DGND R21 TXCLKOUT- 13 13
+12VB +12V_CAM NC CONTROL_RXD 14 14
1B8>
NC TXCLKOUT+ 15 15
16 16
DGND 17 17
VIDEO_OUT 18 18
19 19
100NF 20 MGND2
C223 20
BAO33CCOFP MGND2
3+3.3V 10UF
OUT
CT222 DGND
U204
GND 2
VCC 1+5V C230 10UF
+3.3V_MI +3.3V_MI DGND
10KOHM
DGND
LM75A R15
R14
10KOHM +12V_CAM
IC1
+5V_S +5V R16 NC
2E8<> 1C5<> M_SDA 1 SOA VCC 8 +12VA
D401 CT401 C401 L401 CIB05J100NC M_SCL 2 7
2E8< 1C5<> SCL A0 R17 NC
3 6
2
10UF 4 5
ICVN1005A150FR
GND A2
UCLAMP0501H
MGND1
24-5077-050-115-856
2
100NF
R19 NC
VR3
MGND1
1
41 42 TILT_HOME_IN
C431 U401 43 44
C
K
R440 TILT_HOME_IN 1 1A
VCC
1Y 7 TILT_HOME 1C8< 45
43 44
46
10UF 45 46
C432 0OHM PAN_HOME_IN 3 5 PAN_HOME 47 48
10NF
10NF
10NF
10NF
1C8<
K
2A 2Y 47 48
IR_HOME_IN 6 2 IR_HOME
49 49 50 50
MGND2
1D7<
MGND2
3A 3Y
DGND GND
R439 NC 100NF VR4
A
PAN_HOME_IN
U3
C411 1 ICVN1005A150FR
2
C438
C437
C436
C435
1 2
4
330OHM
R431 R432 VR5
A
100NF 1 ICVN1005A150FR
2
C412 1 2
0OHM
100NF
DGND VR6 ICVN1005A150FR
C415
1 1 2 2 DGND GND_M
DGND
DGND
DGND
2
SDA 2
FL301
CL-2S2012-121JT
3 3
U301
LM75A C303
CON SENSOR
1 8
+5V_IR 100NF
SOA VCC
SCL1 1 4 4 2 SCL A0 7
+12VB
D141 L141
BD141 10UH 1 MGND1
1
VIN GND
1 1 2 21 1 3 3 2 2 MGND1
22
+12VA_H1 3 3
SS34B NFM41PC204F 4 4
+12VB_F1 5 5
+5V 6 6
10UF
10UF
R143 +5V_IR +5V
2
R141 20KOHM +3.3V 7 7
CT301 C301 L301 8
ICVL1018101A400
3.6KOHM R108 SHDN V301 D301 8
2
9
V141
SCL 9
2
SDA 10
2
10
1.5KOHM
0OHM
UCLAMP0501H
2
1
2
11
1UF
1
HB-1H1005-100JT(BD-1005) IR_HOME_IN
C142
C143
11
ICVN1005A150
12
IR_APSE
2
C209 NC 12
OUT
U141
VCC
13
1
10UF
C210 NC IR_BPSE 13
14
GND
SJ73L25S F2_CONT 14
1
R142
100NF
C141
H1_CONT 15 15
16
1
F1_CONT 16
1
17
1
+12VB 17
18 18
GND 19 19
GND 20 MGND2
20
MGND2
U101
ID : 100
C302 2 3SDA
2 3
C102 LT3475EFE U302 100NF GND
D101
10UF MSS1P4 PCZ8575 1 4SCL
1 OUT1 PWM1 20 IRZONOFF 1KOHM +5V_IR R302 10KOHM 1 INT VDD 24
+5V_IR 1 4
2
IRZOOM LED1 Vadj1 19 VADJ1 R105 R303 10KOHM 2 AD1 SDA 23 FL201
1 1 2 2 3 BOOST1 VC1 18 VC1 R106 C106 +5V_IR R304 10KOHM 3 AD2 SCL 22 CL-2S2012-121JT
CON FAN1
4 SW1 REF 17
REF R104 1KOHM VADJ1
10KOHM
C107
3.3NF
+5V_IR R305 10KOHM BI1 4 P00 AD0 21 R321
5 16 5 20 10KOHM+5V_IR
220NF
3.3NF
SHDN R109 R306 BI0 F1_CONT R320 PULL UP DEFAULT
C101
+12VB_F1 1 1
GND 2 2
GND
MGND2
MGND2
RC2012F202CS
RC2012F202CS
GND
VADJ1
R129
OUT
COMMON
CON IR,MOTOR,PI
+5V_IR 10KOHM +3.3V_S 20KOHM R445
+5V_IR R205 19 DECAY C427 47K
IR_CO +5V_IR
+5V_IR R203 10KOHM
16 nRESET GND 28 10UF
+5V_IR R204 10KOHM
17 nSLEEP GND 14 R506
NC
R507
NC R447
10KOHM +3.3V_S +3.3V
J973 NFAULT 18 nFAULT PPAD 29 0OHM
05004HR-H20ED1 GND
IR_HOME_IN
---------------------------------------------
GND (1) COLLECTOR OUT(DEFAULT)
SCL_S 1 MGND1
1 R212 - R449 : NC
DVI 2 2 MGND1 0OHM - R448 : 000
SDA_S 3 3 R208 R209 - R445 : 47K
4 +3.3V SETTING (DEFAULT : (1))
4 - R447 : 000
ADDR 5 5 12KOHM 10KOHM --------------------------------------------- (2) EMITTER OUT(OPTION)
+3.3V_S 6 6 AVREF GND (1) +5V_IR -> +3.3V_S (VOLTAGE DIVISION) - R449 : 000
7 7 - R448 : 2K
8 R210 R211 - R504 : 10K
8 V33 - R445 : 000
9 9 12KOHM 10KOHM GNDM - R505 : 20K - R447 : NC
IRZOOM 10 10 ---------------------------------------------
BVREF - R506 : NC
11 11
12 12
13
IR_A2 R213 - R507 : NC (000 : PIN = GND)
C208 NC 13
14
IR_BA +12VB NC +12VM
C207 NC 14 (2) +3.3V -> +3.3V_S (SENSOR REG USE)
GNDM C206 NC 15
IR_A1 15
16
IR_B2 - R504 : NC
C205 NC 16
IR_CO 17 17 R214 - R505 : NC
PI_AN 18 18 VIN 0OHM
19 - R506 : 000
19
PI_EM 20 MGND2
20 - R507 : NC
MGND2
---------------------------------------------
GND
GND
+12VB
GND
12505WS-02A00
330OHM
100NF
R501
C622 J982 MGND1
+3.3V MGND1
D5012
MRA4003T3G
BAO33CCOFP
1
1
2
3
4
IM03GR
TP6
2
CT622 1
OUT 3
2
1
2GND 10UF
K501
1
3
4
TP5
U620
2
1
[400] TILT PI +5V
GND
+5V MGND2
SSC-YG101
6
7
5
VCC 1 C613
+12VB_F2 MGND2
10UF
8
7
6
5
C443100NF
1
+5V_SN R451
+5V_SN
LED501 +12VB_F1
CON MOTION A
2
10UF GND 47K
2
0OHM
C429
R452
05005HS-20F(G)
C
K
3
+3.3V_IS +3.3V
U404
OUT
TILT HOME IN Q501 V621 D621 CT621 C621 J979
C
F1_CONT 1 IN SRC1210S L621
TXOUT2- 1 2 TXOUT2+
ICVN1005A150FR
R453
2
1 2
CIB05J100NC
COMMON
TXOUT1- 3 4 TXOUT1+
2
NC
2
3 4
UCLAMP0501H
TXOUT0- 5 6 TXOUT0+
A
ICVN1005A150FR
2
V501
5 6
330OHM 0OHM TXCLKOUT- TXCLKOUT+
100NF
2
7 8
100NF
EE-SX1042 7 8
GND 10UF TP28 SCL 9 10 SDA TP38
A
2
9 10
1
C501
IR HOME IN 11 12 IR APSE
1
R449 R448 TP32 11 12 TP39
TP29 IR BPSE 13 14 TILT HOME IN TP52
1
13 14
GND
1
M_TXD M_RXD
1
TP33 15 16 TP53
1
15 16
17 17 18 18 VIDEO OUT
PULL DOWN DEFAULT TP34 GND CAM 19 19 20 20
30W, 1.6A TVS DIODE FOR ESD
GND MGND1 MGND3
GND MGND1 MGND3
[600] REG., TEMP +5V TP41
MGND2 MGND2 MGND4 MGND4
TP42
2
BAS516
+5V_SN
10NF
2
R601
+12VA +12VB GND
D602
330OHM
C603
100KOHM
R511
D5112
+12VB
MRA4003T3G
4.7UH 1 8
1
2
3
4
IM03GR
2
BS SS
1
10UF
10UF
L603 2 U601 7
100NF
1
L602 IN EN
TP45
3 6
K511
1
3
4
2
SW COMP
C607
C421
C422
C423
4 5
1
2.2NF
33UH 10KOHM 3.3NF CON MOTION B
TP48
100NF
10000NF
GND FB
SSC-YG101
6
7
5
2
+5V
MP2305DS
1
MSS1P4
GND CAM
8
7
6
5
C605
C606
C604
D603
+12VA
1
+5V
LED511 +12VA_H1 +12VB
2
0OHM
22UF
5.6KOHM
R602
C602
2
R445
1 2
10KOHM
1
TP43 1 2
R605
GND 3 4
R604
TP44
3
3 4
5 6
OUT
5 6
Q511 7 7 8 8
GND H1_CONT 1 IN SRC1210S 9 9 10 10
ICVN1005A150FR
11 12
COMMON
+12VA
2
11 12
13 13 14 14
V511
GND 15 16
100NF
2
15 16
17 17 18 18
+12VA_H1 19 20 +12VA_H1
2
C511
10UF
10UF
TP49 19 20 TP50
100NF
+5V_SN +5V MGND1 MGND1 MGND3 MGND3
GND
C424
C425
C426
1 MGND2 MGND2 MGND4 MGND4
V601 D601 CT601 C601 L601
UCLAMP0501H
GND
2
GND
ICVN1005A150FR
2
10UF GND
100NF
1 1
GND
1
27 TXCLKOUT-
R521
+5V_SN 27 4 4 TP3
26 TXOUT2+ +12VB_F1 5 5
D5212
26
MRA4003T3G
+5V
2
FL601 25 6 6
SDA1 1 4 4 1 SOA VCC 8 24 24 TXOUT1+ +3.3V_IS 7 7
TP7
2 7R623 NC 23 TXOUT1- TP8
1
SCL2
K521
1
3
4
2
2 3 3 3
SCL A0
6 R622
23
22 TXOUT0+ R455 0OHM 8 8
1
O8 A1
NC SSC-YG101
22 SCL 9 9
8
TP9
6
7
4 5 21 TXOUT0-
ACM2012-121 GND A2 21
20 SDA 10 10 TP10
20 IR HOME IN 11 11
1
8
7
6
5
19 IR APSE
1
LED521 +12VB_F2
19
M_TXD 12 12 TP12
18 18 IR BPSE 13 13 TP13
2
17 17 F2_CONT 14 14 TP14
2
GND 16 16 H1_CONT 15 15
15 TP15
15
14
F1_CONT 16 16 TP16
3
14 +12VB 17 17 TP17
OUT
GND 13 13 18 18
Q521 12
F2_CONT 1 IN SRC1210S 12
11 0OHM 19 19 TP18
ICVN1005A150FR
11 R456 20 MGND2
COMMON
10
2
20
10
9 MGND2
V521
9
100NF
2
8 8
7
2
7
C521
6
1
6 GND
5 5
GND VIDEO OUT
1
4 4
MGND1
3 3
PULL DOWN DEFAULT MGND1 2 2
GND 1 1
CN1
05004HR GND
144P
IC11
+3V
DRST
A4 RSTX XI1 F12 27MHZ_1
R65 10KOHM
27MHZ_0
A3 XI0 GPIO0 M1 F_PO_MCN
10KOHM
B1 GPIO1 L2 DN_PO_MCN
+3V CH1_PORT_0+
R114
LDIP0
GPIO2 M2 EXT_DN/HT1_ON
100OHM L3
CH1_PORT_0-
B2 LDIM0
GPIO3
M3 D_MD_OUT/HT2_ON
IC10
R67
C1
ICVL1018101A400
GPIO4 KEY_2/RX
CH1_PORT_1+ LDIP1 K3
NC 1 8
2ICVL1018101A400
SDA R69 R115 GPIO5 485_DIR/TX
SOA VCC 100OHM H5R124 22OHM
NC 2 7 C2
SCL R70 +1.2V GPIO6 CMOS_CS
J3 R125
D11 PG05BSESC
SCL A0 CH1_PORT_1- LDIM1
OVER_TEMP 3 6 D1 GPIO7 22OHM CMOS_DI
J4 R126
PG05BSESC
O8 A1 CH1_CLK+ LDIP2
4 5 22OHM
2
+1.2V R116 GPIO8 CMOS_CK
GND A2 1608 100OHM K4 R131 22OHM
2
D2
2
BD13 VCC_PLL/LVDS-1.2 GPIO9 MTR_CS
1608 CH1_CLK-
F1
LDIM2
GPIO10 K5 R127 22OHM MTR_SDI
NC K6 R128
2
BD18 CH2_PORT_0+ LDIP3
C72 22OHM
2
R117 GPIO11 MTR_SCK
100NF
100OHM
2
F2 GPIO12 K7 R129 22OHM MTR_SDO
1NF
C86
DGND DGND 100UF CH2_PORT_0- LDIM3 J5 R130
100UF G1 GPIO13 22OHM CMOS_RESET
100NF
VR7
D14
144P C88
2
CH2_PORT_1+ LDIP4 M8
C69
C75
VR10
GPIO14
IC11 R118 Z_F_PI_EN
1NF
100OHM L8
1
CH2_PORT_1-
G2 LDIM4
GPIO15
K9 SCL
1
C89
H1 GPIO16
M9 SDA
PG05BSESC
CH2_CLK+ LDIP5
1
AGND A2 E11 R119 100OHM
GPIO17 MDIN_RST/FAN_ON
1
L9
VR6 ICVL1018101A400
AVDD0 AVDD2
+3V
D11 AVDD1_3 CH2_CLK-
H2 LDIM5
GPIO18
M10 Z_PO_MCN
AVDD3
AGND C3 GPIO19
L10 LED1_ON/FSADJ1/RS
2
LDIP6
A1 GPIO20 LED2_ON/FSADJ2
C87
47UF
47UF
1608
100NF
C161
C162
2
M11
PG05BSESC
2
AGND0 +1.2V
BD14 AVDD1_3 B11 E12 C4 GPIO21 DN_IN1
AGND
AVDD1 AGND2
1608 D3
LDIM6
GPIO22 L11 DN_IN2
2
VDDC1 K10 BD20 LDIP7
GPIO23 L12 DN_IN3
100NF
D10
J2 K11
2
47UF
47UF
C163
C164
A12 VDDC2 D4 GPIO24 DN_IN4
1NF
TCSHS1A336MAAR
2
G6 K12
2
AGND1 LDIM7
100NF
+3V E2 VDDC3 E3 GPIO25 KEY_3
C77
VDDQ0 F7 C84 LDIP8 J6
1
C70
VDDC4 GPIO26 KEY_4
D15
1
2
E5 H6
VR11
10KOHM 1608 E4
2ICVL1018101A400
VCC_SN_1.8 VDDC5 GPIO27 KEY_5
R64 BD11 A8 LDIM8 J7 R132
C81
E6 VDDC6 F3 GPIO28 22OHM MTR_VD
+2.8V +3V VDDQ1_0 LDIP9 H7R133
1
AGND H8 22OHM
ICVL1018101A400
VCC_SR_1.8 VDDQ3 GPIO29 IRIS_VD
J8
PG05BSESC
VDDQ1_1 +3V
1
100NF
1
1 4 F6 DGND LDIM9 K8
1NF
10UF
VCC
DGND
10KOHM
10KOHM
10KOHM
10KOHM
10KOHM
10KOHM
G9 1 8 NC
2
C0
Y2
27MHZ
C64
2
2
D12 PG05BSESC
100NF
100NF
2 3 R72 M12
DGND6
A10 C85 H3 CO1
G11 3 6 C_OUT<1>
2
LDIP11 C2
GND
51OHM
OUT
D13
NC C71
2
2
M7 E1 H9 4 5
2
VR9
C74
J1 F5 TCSHS1A336MAAR LDIM11 H10 C4 1 8 NC
C82
DGND3 DGND9 CO4 C_OUT<4>
2
1
DGND4 DGND10 CO5 C_OUT<5>
R107
R112
R113
R120
R121
R122
G8 G5 C6 J9 C6 3 6
1
DGND DGND5 DGND11 JMODE CO6 C_OUT<6>
1
DGND C5 J10 C7 4 5
1
ICVL1018101A400
B7 J11 C8 1 8 NC
1
A6 J12 C9 2 7R136
2ICVL1018101A400
ADCI2 YO4 Y4
BD10 HALL_BIAS Y_OUT<4>
2
HALL_AD
C9 ADCI3 YO5 E8 Y5 4 5 Y_OUT<5>
DGND AGND YO6 E9 Y6 1 8 NC Y_OUT<6>
100NF
2
L6 E10 Y7 2 7R138
D9
+1.8V SCKO
M6 SF_CKO YO8 F9 Y8 3 6 Y_OUT<8>
10UF M4 F10 Y9 4 5
1
1608 L4 C90
1
AGND
DGND REXTD B10 R140
100NF
TCSHS1A336MAAR TCSHS1A336MAAR R110 K2
C76 HSI 22OHM HSI 15KOHM
R111 L1 B12
C78
C83
IC9
1 8 10KOHM L7
R123 EXTS MCKO K1 R141 22OHM INCK
SCSN CS VCC DGND +3V H12 DCKO R143 NC
SDQ1
2 DO NC 7 SDQ3 DGND B3
DCKO
B8 R144
E_DCLK
3 6 TP0 DENO 51OHM DENO
SDQ2
4
WP CLK
5 SCKO B4 TP1
NC
NC
NC
NC
NC
10KOHM
10KOHM
10KOHM
VSO E_VD
CN5 RX2
D6 RX0
DGND D5 C12
R74
R75
R76
R77
R78
R104
R105
R106
4 4
CDS_IN
5 5
6 6
KEY_1
+3V +1.2V 7 7
KEY_2/RX
8 8
MICOM D/L DGND
1608
KEY_3
9 9
100OHM
100OHM
+3V KEY_4
KEY_5
10 10
11 11
270KOHM
TX2
12 12
R63
R66
BD19
RX2
485_DIR/TX
13 13
14 14 12505WS-09P
15 15 CN13
R68
1 OVER_TEMP
16 16 1 R97 0OHM
VCC
2 R71 22OHM DRST
D_MD_OUT/HT2_ON
17 17
1
MGND1 2 R98
KEY_2/RX
3P
Q2
0OHM
OUT
GND 3 EXT_DN/HT1_ON
18 18
2
3 485_DIR/TX
MDIN_RST/FAN_ON MGND1 3
100NF
19 19 4 R99 0OHM
1000NF
4 JTRST
CVBS
20 MGND2
20 5 5
6
C63
C62
MGND2 6 JTDO
7 7 JTDI
NC 8
8 JTCK
DGND MGND2
9 9 JTMS
MGND2
DGND
DGND
100J
BD24 +3V
TCSHS1A336MAAR 100NF
C156
C159
1UF
C155
CVBS IC13
CVBS DGND
GND9
1 8
39
CP1 CP2 C157 GND8
2 7
38
1UF V_P V_N
TCSHS1A336MAAR
GND7
3 6
37
C154 VIN GND GND6
4 5
36
PWRSAVE VOUT 75OHM CVBS1
CVBS1
82OHM
35 GND5
R233
R232
NJM1351RB1 34 GND4
75OHM CVBS2
10PF CVBS2 33 GND3
R234
C158
GND2
2
32
ICVN1005A150 31 GND1
39P TXOUT3+
VR3 VR4
2
30 30
CN2 TXOUT3-
VCL_GND DGND 29 29
TXCLKOUT+ 28
MGND2 39
28
TXCLKOUT-
1
39 ICVN1005A150 27
38
27
38 MGND2 TXOUT2+
INCK
1
26
37
26
37 TXOUT2- 25
36
25
TXOUT1+
E_DE
CMOS_CK 36
DGND
24
35
24
35 TXOUT1-
CMOS_DI 23
34
23
34 TXOUT0+
CMOS_CS 22
33
22
33 TXOUT0-
CMOS_RESET 21
32
21
0OHM
32 20
31
20
31 TX2 R17 22OHM TX2_1
VSI 19
30
19
RX2 R18 22OHM RX2_1
LED1_ON/FSADJ1/RS
HSI 30 18
29
18
29 17
28
17
DC_IN
CH1_CLK- 28
R142
16
27
16
27 CH1_CLK+ 15
26
15
Y_OUT<1>
Y_OUT<0>
Y_OUT<9>
Y_OUT<8>
Y_OUT<7>
Y_OUT<6>
Y_OUT<5>
Y_OUT<4>
Y_OUT<3>
Y_OUT<2>
CH1_PORT_0- 26 14
25
14
25 CH1_PORT_0+ 13
24
13
CH1_PORT_1- 24 12
23
12
23 CH1_PORT_1+ 11
22 +3V
11
CH2_CLK- 22 10
21
10
21 CH2_CLK+ 1608 9
20
9
20 BD1 R11 NC
NC
CH2_PORT_0- E_DE 8
19
8
R12
100NF
19 CH2_PORT_0+ E_HD NC
10UF
7
18
NC
7
18 HD_1
CH2_PORT_1- 6
17
6
R13 VD_1
C165
NC
E_HD
E_VD
17 CH2_PORT_1+ E_VD
C1
5
16
5
R14 VENC_1
C3
1KOHM NC
R246
16 R245 MDIN_RST/FAN_ON 4
15
4
+1.8V
15 R8 G/Y
NC
3
14
3
14 R15 0OHM
CVBS1 B/PB 2
13
2
DGND R16 NC
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
13
+5V
VENC R/PR 1
12
1
12
+5V
CN3
11 11 30P
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
10 10 C_OUT_N<9>
49 49 32 32
9 9 C_OUT<2>
50 50 31 31 R235 51OHM TXOUT0-
8 8 51 51 30 30 R236 51OHM TXOUT0+ DGND
7 7 C_OUT<3>
52 52 29 29 R237 51OHM TXOUT1- +3V
6 6 100NF C_OUT<4>
53 53 28 28 R238 51OHM TXOUT1+ 1608 TXOUT3+
5 5 C_OUT<5>
54 54 27 27 BD3 R247 NC
4 55 26 TXOUT3-
C2
4 C_OUT<6> 55 26 05004HR
3 3 56 56 THC63LVD103D 25 25 R239 51OHM TXOUT2- TXCLKOUT+ CN6
100NF
2 57 24 R240 51OHM TXOUT2+ R248 1
10UF
2 C_OUT<7> 57 24 NC 1
MGND1 1 58 IC2 23 R241 51OHM TXCLKOUT- TXCLKOUT- 2 MGND1
C7
C8
1 DGND C_OUT<8> 58 23 2
MGND1 C_OUT<9>
59 59 22 22 R242 51OHM TXCLKOUT+ TXOUT2+ 3 3
60
10KOHM 60 21 21 R243 51OHM TXOUT3- R249 NC 4 4
MGND1
10
11
12
13
14
15
16
R251 10
1
2
3
4
5
6
7
8
9
NC 10
TXOUT0- 11 11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
TX2_1 12
10KOHM
12
E_DCLK RX2_1 13 13
14
R7
14
15
DC_IN
15
12505WR-03 16 16
CN1 0OHM 0OHM 17
R9 R10 17
18
MGND1 18
1 1 R1 NC MDIN_RST/FAN_ON 100NF 19 19
MGND1 PGND DGND 20
C4
2 2 R2 NC SCL
21
20
R3 0OHM CVBS2 PGND DGND LGND 21
MGND2
3 3 LGND 22 22
MGND2 R4 NC SDA +3V 23 23
R5 0OHM DGND 24 24
1608 HD_1 25
BD2 25
VD_1 26 26
DGND VENC_1 27 27
100NF
28
10UF
DGND G/Y 28
29 MGND2
C5
B/PB 29
C6
R/PR
30 30
+5V +2.8V MGND2
D8
NC IC12
1 1 2 2 1 IN OUT 5 PGND
BD23
NC 2 GND
DGND
C151
3 4
NC
EN ADJ R230
NC
C152
NC
C153
NC
NC
DGND
R231
NC
DGND
DC_IN MSS1P4
D2 NFM41PC204F +12V
0467 01.5
F1
BD4
1 2 1 1 2 2 1 1 3 3
22
1 1
DGND
VR1
+12V
ICVL1018101A400
2
L3 10UH
10UF
10UF
C32
DGND
C19
C23
C26 NC
10NF
+5V DGND R29 R31 15KOHM
30KOHM
DGND
L4 10UH L6 10UH MP2364DF SB_EN
IC4
2
C33
22UF
0.47NF
2
1 20
22UF
C17
SSA ENA 2.2NF
2 19 R35 C34
C20
NC1 COMPA
+12V
D6
3 18 10KOHM
MSS1P4
BSA FBA
+5V_DN 4 INA SGA 17 R36 10KOHM
D3 D4 5 16
DGND SWA PGA
1
R19
R22
2 1 2 1 L5 10UH 6 15
1
2 1 2 1 PGA SWA DGND
20KOHM
R27 7 14
3.6KOHM
10KOHM
1
SGA INB
D7
8 13
22UF
MSS1P4 MSS1P4 2.2NF
1
FBB NC2
C21 R28 9 12
22UF
C18
10KOHM
SMAB33
COMPB BSB
SB_EN 10 11
C35
ENB SSB
MGND
C22
1
2
3
0.47NF
R20
R23
C11
C13
+3V
100NF
10KOHM
VCC
OUT
GND
100NF
1.5KOHM
C29
1000NF
1000NF
DGND
2
C24
21
DGND L7 33UH
2
Q1 SB_EN
KIA7025AT
10NF
C30
DGND DGND
DGND R30 R32 15KOHM
9.1KOHM
C27 NC
MP2305DS
IC3
+12V 10NF
10UH C12 1 BS SS 8
L1 2 7 SB_EN
C16
33UH IN EN
L2 3 SW COMP 6 MSS1P4
C9
100NF
4 5 +3V D5 +1.8V
2
GND FB MIC5205YM
10UF
1608 IC5
2
MSS1P4
1 1 2 2BD5 1 IN OUT 5
D1
C25
DGND GND
DGND 33KOHM
3.3UF
3 EN ADJ 4
1
C28
C31
C15
1
R34
15KOHM
22UF
.47NF
3.3NF
+1.2V
R33
DGND 1.5KOHM 1.5KOHM
R21 R24 DGND
R25
2.2KOHM
C10
10KOHM
22UF
NC
DGND
R26
C14
+5V_DN +5V_M
1608
BD7
C43
C39
C46
C49
C52
10UF +3V_M
C36
100NF
100NF
100NF
100NF
10UF
R54 560OHM
TP-SMD-0_3
TP-SMD-0_3
TP-SMD-0_3
TP-SMD-0_3
TP-SMD-0_3
TP-SMD-0_3
C57
100NF
VCL_GND
+5V_DN +5V_DN_1 TP9 TP11 TP13
TP-SMD-0_3
VCL_GND TP8 TP10 TP12
1608
BD8
C44
VCL_GND
0.1NF
C40
C47
C50
C53
C54
C55
C56
10UF
0.1NF
PLS2
C37 PLS1 TP14 TP-SMD-0_3
10NF
100NF
100NF
100NF
100NF
TP7
TP-SMD-0_3
TP-SMD-0_3
TP-SMD-0_3
10UF
MTR_VD TP15 TP-SMD-0_3
IRIS_VD
H_OUT- MTR_SDI
H_IN+
44
43
42
41
40
39
38
37
36
35
34
TP4 TP5 TP6
DN_GND
OP4INN
VREF
CREFIN
GNDA
RSTB
PLS2
PLS1
VD_FZ
VD_IS
SIN
OP4OUT
+3V +3V_M
H_OUT+ 1 OP3INP SCK 33 MTR_SCK
1608 HALL_BIAS R50 H_IN- 2 32 MTR_CS
BD6 22OHM SENS CS
C45
C48
C51
4 IC14 30
REF DVDD
5 29 DRIVE_CLK
100NF
100NF
MGNDB
MVCCB
MVCCA
OUTD2
OUTD1
OUTC2
OUTC1
OUTB2
OUTB1
OUTA2
TEST
+3V_M
.47NF VCL_GND DGND DN_GND
12
13
14
15
16
17
18
19
20
21
22
C42
+3V_M
IC6
4 S2 D2_2 3
Z_F_PI_EN
R37 0OHM 5 2 R44
1KOHM VCL_GND
10KOHM
10KOHM
ON_OFF D2_1
6 1
R52
R53
F_B+
F_A+
Z_B+
F_B-
F_A-
Z_B-
Z_A-
10KOHM R1_C1 R2
R38 SI3865CDV
100NF
C38
VCL_GND
VCL_GND
VCL_GND 05004HR
CN4
F_A+ 1 1
F_B- 2 2
F_B+ 3 3
F_A- 4 4
5 MGND1
5
DRIVE+ 6 6
H_OUT+ 7 7 MGND1
H_IN- 8 8
H_OUT- 9 9 +3V
H_IN+ 10 10 +5V_DN_1
DRIVE- 11 11 1608
TC7WU04FU(SSOP8-P0_65)
+3V_M R60 10KOHM BD9
12 12 IC7
IC8
13 13
DN_IN1 1 10 DN_A+ Z_PO 1 8
100NF
Z_PO 14 14 IN1 OUT1 1A VCC C60
1NF
2 7 Z_PO_MCN
C59
C61
15 15 DN_IN2 2 IN2 OUT2 9 DN_A- 3Y
8P
1Y
10UF
F_PO 3 6 DN_PO
Z_B- 16 16 A3901 DN_PO_MCN 2A 3A
Z_A+ 17 17 3 GND VBB 8 4 GND 2Y 5 F_PO_MCN 1 4
NC
VCC
Z_B+ 18 18 DN_IN3 4 7 DN_B+ Y1
IN3 OUT3
Z_A- 19 19 5 6 27MHZ
DN_IN4 DN_B-
100NF
20 20 IN4 OUT4 DGND
C58
2 3 R61 51OHM DRIVE_CLK
GND
PAD
OUT
21 21
F_PO 22 22 R62 51OHM 325_CLK
DN_PO 23 23
11
24 24 DGND
25 MGND2
25
VCL_GND VCL_GND
DN_A- 26 26
DN_B+ 27 27 MGND2 DN_GND
DN_A+ 28 28
DN_B- 29 29
33KOHM
33KOHM
33KOHM
39OHM
39OHM
39OHM
R40
R39
R41
R42
R43
R45
VCL_GND
VCL_GND
S_+12V
+ C1
BP62 47uF/25V(E)
104
S_GND
J2
S_TILT_B 1 1
S_TILT_A 2 2
S_+12V
S_TILT_/A 3 3
NC NC S_TILT_/B 4 4
J3
TXCLKOUT+
S_TILT_B 1 20 12505WR_04
TXOUT2- 2 19
S_TILT_A
R162
100R
3 18
100R
S_TILT_/B TXOUT0+
R2
4 17
S_TILT_HOME_IN
5 16
S_TILT_/A TXCLKOUT-
6 15
R191
100R
TXOUT2+ 7 14
VENC_1
8 13
TXOUT1- S_CAM_RXD
9 12
S_CAM_TXD 10 11 TXOUT0-
R176
100R
S_CAM_TXD
10029WS-20_TECHWIN NC S_CAM_RXD
TXOUT1+
TO MOTION S_GND
S_+12V BOTTOM CONTACT
TXCLKOUT+
TOP VIEW
NC J1
R6
100R
1 1
TXCLKOUT- 2 2
TXOUT2+ 3 3
4 4
5 5
6
R5
100R
6
7 7
8 8
TXOUT2- 9 9
10 10
TXOUT1+ 11 11
12 12
13
R1
100R
13
14 14
S_+12V 15 15
TXOUT1-
16 16
TXOUT0+ 17 17
18 18
19 19
NC
R4
100R
20 20
TXOUT0- 05003HR-20A01
R8
VENC_1
TO CAMERA
R19
47K
1.2K(1/8W)
S_GND
S_TILT_HOME_IN
U14
1 EE-SX1042 3
A C
OUTPUT LEVEL : 4.6V
R23
33K
2 4
K E (ACTIVE HIGH)
1 M5 1 M9
1 M4 1 M6
MTHOLE-2.1 MTHOLE-3.3
1 M7 1 M8
MTHOLE-3.7 MTHOLE-3.7
GND +12VB
CON MOTION +12VA
100NF
10UF
10UF
MGND1
14-5077-050-112-861
100NF
100NF
100NF
10UF
10UF
+12VB +12VA CN1
C4
C5
C6
C1
C2
C3
C7
C8
MGND1
TXOUT2- 1 1 2 2 TILT2A GND CAM
TXOUT2+ 3 3 4 4 TILT2B
5 5 6 6 TILT1A GND
TXOUT1- 7 7 8 8 TILT1B
TXOUT1+ 9 9 10 10
11 11 12 12
TXOUT0- 13 13 14 14
TXOUT0+ 15 15 16 16 M_TXD
17 17 18 18 M_RXD
TXCLKOUT- 19 19 20 20 M_SCL
TXCLKOUT+ 21 21 22 22 M_SDA
23 23 24 24
25 25 26 26
27 27 28 28 VIDEO OUT
29 29 30 30
31 31 32 32
33 33 34 34
35 35 36 36 IR_BPSE
37 37 38 38 IR_APSE
39 39 40 40 IR_HOME_IN
41 41 42 42 TILT_HOME_IN
43 43 44 44
45 45 46 46
47 48
MGND2
47 48
49 49 50 50
MGND2
GND
Power
VCC+3.3V
VCC+3.3V
60OHM
BD1
NC
NC
NC
NC
NC
NC
DGND UGND
1000NF
100NF
22UF
C1
C2
C3
SCDA7A0102
R49
R51
R52
R53
R54
R55
J1
VDD 4
VCC+3.3V
CLK 5 SD_CLK
CD/DATA 1 SD_DATA3
7 SD_DATA0 JIG SERIAL
2 NC
DATA0
DATA1 8 SD_DATA1 2
D14
1 1 DGND
DATA2 9 SD_DATA2 12505WR-04A
CMD 2 SD_CMD CN2
CARD_DT_SW 10 DGND
WRITE_PROTECT_DT_SW 12 SD_WP MGND1
1 1
11 MGND1 2 2 UART0_RXD
COMMON
3 3 3
VSS1
6 4 4 UART0_TXD
VSS2 MGND2
NC
NC
SD CARD
2 2
2 2
MGND2
SCREW HOLE
D15
D16
M1 M2 M3 M4
DGND UGND
1
1
1
TP45 TP34 TP35 TP36 TP37 TP38 TP39 TP40 TP41 TP42TP43. TP44
VCC+3.3V DGND
12505WR-15
CN1
DGND
1 1
2
16 2
3 FACTORY_RST
3
4 4
SD_DATA0
MGND1
5 5
6 6 SD_DATA1 VCC+3.3V
7 7 SD_DATA2
8 8 SD_DATA3
9 SD_CMD
47KOHM
9
10 10 SD_CLK JTP1133RN
R43
11 11 UART0_RXD
12 UART0_TXD SW1
12
13 1 1
17 13
14 SD_WP
14
15 2 2 FACTORY_RST
2 2
D3 NC2
D4 NC2
D5 NC2
D6 NC2
D7 NC2
D8 NC2
D9 NC2
D10 NC2
2
2
2
MGND2 15
NC
2
2
3
PG05BSESC
PG05BSESC
PG05BSESC
3
D11
D12
D13
100NF
C17
D2
DGND
DGND
1
1
1
1
1
1
1
1
1
1
1
1
1
1
DGND
DGND
DGND
9. JIG List
ASSY,JIG-AS PART-
AM03-018800A Firmware Upgrade
(SRN-472S) FW JIG
ASSY,JIG-AS PART-
AM03-018801A SRN-472S FW JIG Firmware Upgrade
CABLE1
ASSY,JIG-AS PART-
AM03-018802A SRN-472S FW JIG Firmware Upgrade
CABLE2
• Purpose of use: Mega-level CCTV Camera Lens with no Simple Focus(AF) function
• Way of use
1. Print the Focus Chart at the size of A0~A1 according to the installation environments.
→ Attach it to a strong plywood board (paper).
→ Produce it to be folded into 1/4 size to carry, and unfold it to use.
2. Place the focus chart in the position to take the focus. The matter that requires attention at this time is that the focus chart should
be placed at or near the center if possible.
*When the focus adjustment is carried out at the end of screen, the deviation between the left and right sides may occur.
3. Carry out the camera focus adjustment by adjusting the focus lever of the lens. At this time, the central part of focus chart on the
screen becomes blurry in circle shape, and the position of the smallest circle formed is the best focus.
It is impossible to use it in case of printing the focus chart too small or the target position for focusing too far.
9-2-1 Tracking
Web Site
URL ; http://www.4cust.net
JUN.2016
This Service Manual is a property of Samsung.
Written in Korea
Any unauthorized use of Manual can be punished under applicable
REV : 01
International and/or domestic law.