Professional Documents
Culture Documents
New Tank Cleaning Nozzle Catologue
New Tank Cleaning Nozzle Catologue
Series SL20
Design feature:
1 Inexpensive rotating nozzle
2 Good corrosion resistance
3 360°and partial coverage
4 Slide bearing
5 Very compact design, self rotating
6 Driven and lubricated by the cleaning fluid
Performance data:
Material: PP, PVDF on request
Spray angle: 360°, 180°on request
Max. cleaning diameter: 1-1.5 m
Max. operating temperature: 60°
Operating pressure: 1-2 bar
Connection: 1/2" BSPP
Installation: operation in any direction is possible
Application: for the rinsing and cleaning of kegs, cans, autoclaves, barrels, machines
e.g. in food industry, beverage industry,or chemical industry
40 1.6
35 1.4
Spray diameter (m)
30 1.2
Flow rate (L/min)
25 1
20 0.8
10 0.4
5 0.2
0 0
1 2 3 4 1 2 3 4
Pressure (bar) Pressure (bar)
Series KX
Design feature:
1 Small diameter to insert in small openings
2 Excellent cleaning power
3 Stainless steel AISI 316 SS
4 Slide bearing
5 Very compact design, self rotating
6 Driven and lubricated by the cleaning fluid
Performance data:
Material: 316ss
Spray angle: 360°
Max. cleaning diameter: 1-1.5 m
Max. operating temperature: 140°
Operating pressure: 1-2 bar
Connection: 3/8" BSPP, 3/4" Slip-on
Installation: operation in any direction is possible
Application: for the rinsing and cleaning of kegs, cans, autoclaves, barrels, machines
e.g. in food industry, beverage industry,or chemical industry
40 1.6
35 1.4
30
Spray diameter (m)
1.2
Flow rate (bar)
25 1
20 KX14 0.8 KX14
15 KX20 0.6 KX20
10 KX30 KX30
0.4
5 0.2
0 0
1 2 3 4 1 2 3 4
Pressure (bar) Pressure (bar)
Dimension:
Model Connection H D
KX14 1/8" BSPP 38.3 20
KX20 1/4" BSPP 49.3 25
KX30 3/8" BSPP 69.3 30
Series FW
Design feature:
1 Cleaning with foam and water and for steam sterilisation
2 High functional reliability during operation with liquids as well as with foam from detergent/water mixtures
3 Low water and detergent consumption
4 Optimum cleaning efficiency due to slow rotation
Performance data:
Material: 316L ss
Spray angle: 360°
Max. cleaning diameter: 1.5m
Max. operating temperature: 100°
Operating pressure: 1-5 bar
Connection: 3/8" BSPP
Installation: operation in any direction is possible
Application: Cleaning of tanks with liquids and/or with foam from detergent/ water mixtures
Cleaning of bottling machines, especially for cold aseptic filling
45 1.6
40 1.4
35
Spray diameter (m)
1.2
Flow rate (L/min)
30
1
25
0.8
20 FW15 FW15
0.6
15 FW30 FW30
0.4
10
5 0.2
0 0
1 2 3 4 1 2 3 4
Pressure (bar) Pressure (bar)
Design feature:
1 Ideal for rinsing tanks, vessels and containers up to 25' (7.6 m) in diameter
2 Especially suited for CIP systems – no motor source is needed due to the reactionary force of the cleaning liquid to rotate the
spray head
3 Low pressure for cleaning and rinsing applications
4 Long-life material of construction – corrosion-resistant PTFE fluoropolymer resin
5 Some sizes available in carbon-filled PTFE for improved thermal characteristics and higher mechanical strength over the
standard material PTFE
6 Spray angles range from 180°to 360°to meet most application needs.
7 27500R has a rotating spray head that can be easily removed from the body for inspection and maintenance
Performance data:
Material: PTFE (TEFLON)
Spray angle: 180°spraying up or down, 270°spraying up or down and 360°
Max. cleaning diameter: 3-7.6m
Max. operating temperature: 93°
Operating pressure: 1-3.5 bar
Connection: see table
Installation: operation in any direction is possible
Application: for the rinsing and cleaning of vessels, tanks and machines
e.g. in food industry, beverage industry, pharmaceutical industry or chemical industry
Excellent for corrosive environments
Recommanded for glass-lined or email tanks
Series DN
Performance data:
850 7
800
750 6
700
650
5
550
500 DN15-TEF 4 DN15-TEF
450
DN20-TEF DN20-TEF
400
350 3 DN25-TEF
DN25-TEF
300 DN40-TEF
DN40-TEF
250 2
200 DN50-TEF DN50-TEF
150
1
100
50
0 0
1 2 3 4 1 2 3 4
Pressure (bar) Pressure (bar)
Dimensions:
Series SG
Design feature:
Driven by cleaning fluid, where the ball of the unit rotates at a slow speed, ensuring effective impingement of the cleaning solution on
the interior walls. SG tank cleaning nozzle offer improved cleaning over traditional static spray balls.
Precision Layout of hole ensure thoroughly cleaning.
Reliable slide bearing, low wear design
Application:
KLY rotary tank cleaning nozzles are well suited for small to medium sized tanks, such as dairy , food, pharmaceutical, beer, chemical,
industrial fermentation industry and the need for high impact cleaning occasions.
Performance data:
Material: 316L SS
Spray angle: 360°
Max. cleaning diameter: 2-4m
Max. operating temperature: 95°C
Max. ambient temperature: 140°C
Max. pressure: 20 bar
Recommanded operating pressure: 3-10 bar
Connection: see table
Filtration: line strainer with a mesh size 80/100 mesh
Installation: operation in any direction is possible
Application: for the rinsing and cleaning of vessels, tanks and machines
e.g. in food industry, beverage industry,or chemical industry
Series SG
Performance data:
140 4.5
4
120
3.5
100
3
80 2.5
60 SG2 2 SG2
SG4 1.5 SG4
40
1
20 0.5
0 0
2 4 6 8 10 12 14 16 2 4 6 8 10 12 14 16
Pressure (bar) Pressure (bar)
Dimensions:
Series KZ
Design feature:
1. Controlled rotation
2. Pressure range up to 20 bar
3. Driven and lubricated by the cleaning fluid
4. Reliable slide bearing
5. Low-wear design, long life bearing
The liquid flow powers the head by an internal turbine. Either a gear reduction or a hydraulic brake is used to control the rotation.
Hence the produced droplets are bigger and hit the tank wall with higher velocity. This keeps the speed of the head within its optimal
range across a wider span of pressures, and the nozzles develops more powerful spray.
The new rotating nozzle works very powerfully and efficiently based on the controlled rotation.Compared to conventional rotating
cleaning cycle nozzles, time can be reduced considerably,This saves cleaning fluid, energy costs and time.
Performance data:
Material: 316L SS
Spray angle: 360°
Max. cleaning diameter: 2-6m
Max. operating temperature: 95°C
Max. ambient temperature: 140°C
Max. pressure: 20 bar
Recommanded operating pressure: 3-10 bar
Connection: see table
Filtration: line strainer with a mesh size 80/100 mesh
Installation: operation in any direction is possible
Application: for the rinsing and cleaning of vessels, tanks and machines
e.g. in food industry, beverage industry,or chemical industry
Series KZ
Performance data:
160 7
140 6
120
Flow rate (L/min)
Spray diameter
100
4
80
KZ30 3 KZ30
60
KZ75 KZ75
40 2
20 1
0 0
2 4 6 8 10 12 2 4 6 8 10 12
Pressure (bar) Pressure (bar)
Dimensions:
Series MG
Design feature:
The MG8 rotating tank cleaning nozzle provides complete tank cleaning that is both thorough and cost-effective. It is fluid driven with
external gears and was specifically designed to fit a 95 mm opening, for cleaning of totes, IBCs and other limited access
vessels.
This model also incorporates a set of bevel gears which provide a complete 360-degree indexing pattern every 45 revolutions and has
an effective spray diameter of 30 ft (9.2 m).
Application:
MG8 rotating tank cleaning nozzles are suitable for medium to large tanks, such as Dairy , Food, Pharmaceutical, Beer, Chemical,
industrial fermentation industries and many others.
Performance data:
Material: 316L SS
Spray angle: 360°
Max. cleaning diameter: 2-10m
Max. operating temperature: 95°C
Max. ambient temperature: 140°C
Max. pressure: 20 bar
Recommanded operating pressure: 3-10 bar
Connection: see table
Filtration: line strainer with a mesh size 80/100 mesh
Installation: operation in any direction is possible
Application: for the rinsing and cleaning of vessels, tanks and machines
e.g. in food industry, beverage industry,or chemical industry
Series MG
Performance data:
200 12
180
160 10
120
100 MG5 6 MG5
80 MG8 MG8
60 4
MG10 MG10
40
2
20
0 0
2 4 6 8 10 12 14 16 18 20 2 7 10 15 20
Pressure (bar) Pressure (bar)
Dimensions:
Cleaning cycle:
Series DG20
Design feature:
The DG20 3D rotating tank cleaner provides a powerful and thorough 360-degree cleaning pattern .
The standard machine configuration uses two nozzles to blast the tank walls and rinse all surfaces. In operation, the unit has to
run for the cycle time between on type 8 and 12 min depending on type and pressure. This ensures full cleaning. For extremely difficult
applications the cleaning time might have to be extend.
1. Very high cleaning performance already at low pressure
2. Driven and lubricated by the cleaning fluid
3. Systematically cleans the entire tank interior(360°)
4. Robust, low-maintenance stainless steel construction
5. Using dynamic seal at leakage point to reduce leakage and save cleaning fluid. While producing greater impact on the water flow.
6. The nozzle have a unique steady flow design which can make the jet be more concentrated, greater impact.
Application:
DG20 3D rotating tank cleaner are suitable for medium to large tanks, such as Dairy , Food, Pharmaceutical, Beer, Chemical,
industrial fermentation industries and many others.
Performance data:
Material: 316L ss
Spray angle: 360°
Max. cleaning diameter: 20m
Pressure: 2-30 bar
Recommanded perating pressure: 3-20 bar
Tank openings: 160 mm
Max. operating temperature: 95°C
Connection: 1 1/2" thread
Installation: Vertically facing downward
Series DG20
Performance data:
300
250
200
Flow rate (L/min)
DG20-6
150
DG20-7
DG20-8
100
DG20-10
50
0
2 4 6 8 10 12 14 16 18 20
Pressure (bar)
22
20
18
16
Spray diameter (m)
14
12 DG20-6
10 DG20-7
8 DG20-8
DG20-10
6
0
2 7 10 15 20
Pressure (bar)
Cleaning cycle:
Series ST retractable spray nozzle
Design feature:
When a certain fluid pressure is reached, the pop up type rotating cleaning nozzle is automatically extended from the enclosure.
These free-spinning rotating nozzles can be installed flush in the tank wall.
They are also suitable for cleaning pipes and for applications that use foam. They are of particular interest for applications
in the food and beverage industry as well as for the pharmaceutical and chemical industry.
Performance data:
Material: 316L ss
Spray angle: 240°
Max. cleaning diameter: 0.8
Max. operating temperature: 140°
Operating pressure: 2-3 bar
Connection: 2" tri-clamp
Installation: operation in any direction is possible
Application: for the rinsing and cleaning of vessels, tanks and pipe
e.g. in food industry, beverage industry, pharmaceutical industry or chemical industry
Series ST retractable spray nozzle
Performance data:
90 2.5
80
2
70
Spray diameter
FLow rate (L/min)
60
1.5
50
ST-50 ST-50
40 1
ST-100 ST-100
30
ST-150 ST-150
20 0.5
10
0 0
1 2 3 4 1 2 3 4
Pressure (bar) Pressure
The maximum tank diameter shown above applies for the recommended operating pressure and is indicative only.
The cleaning result is also affected by the type of soiling.
Dimension:
Model H A D E B F
ST-50 197 50 50.5 34.5
ST-100 371 100 50.5 47 40 64
ST-150 507 150 50.5 47 40 64
Series GD
Design feature:
Popular sprayball design
For higher flow rate
Corrosion resistant material
Available in different sizes
Performance data:
Material: 316L ss, 304SS
Spray angle: 360°, on request
Max. cleaning diameter: 1-3
Max. operating temperature: 200°
Operating pressure: 1-3 bar
Installation: operation in any direction is possible
Application: for the rinsing and cleaning of vessels, tanks and pipe
e.g. in food industry, beverage industry, pharmaceutical industry or chemical industry
500 4.5
450 4
400 3.5
Spray diameter (m)
GD-25 GD-25
Flow rate (L/min)
350
3
300 GD-30 GD-30
2.5
250 GD-40 GD-40
2
200 GD-45 GD-45
1.5
150 GD-50 GD-50
100 1
GD-65 GD-65
50 0.5
GD-75 GD-75
0 0
1 2 3 4 1 2 3 4
Pressure (bar) Pressure (bar)
Series GD
Dimension:
Connection size
Ball diameter
Model
(mm)
thread welding Slip-on