Professional Documents
Culture Documents
TDS White Tile Adhesive
TDS White Tile Adhesive
DESCRIPTION: This is a single component ready-made polymer modified water resistant cement
based powder tile adhesive. It is designed for fixing ceramic tiles, Vitrified tiles and small format
stone on interior floor & wall.
FEATURES/BENEFITS:
Polymer modified adhesive
Good adhesion strength
Easy mixing & application
No curing required
Single component, just add water
Economical & Easy to use
Bonds to various substrates
Exceeds shear bond strength requirements
Complies with EN / ISO with a C1T classification.
Exceeds IS 15477 – Type 2 Adhesive standards.
Can be fortified with latex admix for external use.
APPLICATION AREA:
HS TILE ADHESIVE WHITE is ideal for joining the following substrates:
Concrete
Concrete Masonry
Cement Mortar Beds
Cement Plaster
Existing Vitrified Tile* & Ceramic Tile*
Clay & Fly ash Brick Masonry
Cement Terrazzo
Existing Natural Stone*
*Surface to be cleaned before application.
Mixing
HS Tile adhesive white is mixed with potable water (always pour water into powder & not the
reverse) thoroughly until a lumps free mortar mix is obtained (at least 3 min mixing is necessary).
A 25 kg bag of powder requires 6.5 Lt. to 7.5 Lt of water. The adhesive is immediately ready for
use .No further water should be added.
Application:
Apply HS Tile adhesive white at required thickness and smoothen using flat trowel.
Clean off surplus adhesive from the surface
Do not use in damp conditions
TECHNICAL DATA
PROPERTIES SPECIFICATION
Base Specially active additives mixed in white cement
and silica sand mortar.
Aspect Off white Powder
Bulk Density ( gm/cc) 1.1 – 1.33 kg/lt
Mixed Density (w/p=0.27 ) 1.72- 1.79 kg/lt
Workability@ 30 °C 45 min
Open time 30 min
Compressive strength; 28 days > 10 Mpa
(EN 1015 -11)
Coverage 70 Sq ft per 25 kg bag [ 3 mm thickness ]
(general guide line when w/p =0.27)
Pull off adhesion Test (28 Day) , 1 N/MM²
ASTM D 7234
Shear Adhesion test (IS- 15477) 5 N/MM²
PRODUCT INFORMATION
Shelf life 12 months from the date of manufacturing in unopened condition
Storage Store in cool and dry place, free from direct sunlight and frost. Approx.
temp range (+) 5 °C to 40°C. In tropical climate the product must be
stored in an air conditioned environment.
Packs Supplied in 25 kg HDPE bags.
Health & Safety Wear hand gloves, safety shoes and safety goggles while using and
precaution handling the product. In case eyes or mouth are affected wash with
plenty of clean water and seek medical treatment immediately. Before
use, refer to the Material Safety Data Sheet (MSDS).