Professional Documents
Culture Documents
Questions True and False
Questions True and False
1-…………… represents the differences between the object’s actual 3D position and that reported
by tracker
2-…………… represents the change in tracker output when the tracked object is stationary
4-……………. It is the time between the change in object position and the time sensor detect the
change
9-A magnetic tracker is a non-contact position measurement device that uses ………... produced
by a usually stationary TRANSMITTER
2-In order to alleviate the eddy current problem AC was replaced by DC Magnetic trackers
(true)
3- Mechanical trackers are immune to interference from magnetic fields and large metal
objects (true)
4- virtual objects have 6 degrees of freedom three translations three rotations (true)
5- Accuracy of tracker represents the differences between the object’s actual 3D position
and that reported by tracker (true)
6- DC trackers are not immune to non-ferromagnetic metals (false )
7- AC trackers have better resolution and accuracy and have slightly shorter range
(true)
8- Magnetic Trackers Use low-frequency magnetic fields to measure position (true)
9- Magnetic trackers is used to be prevalent but less used today (true)
10- Tracker jitter: is the steady increase in tracker error with time (false)