Professional Documents
Culture Documents
ST 1
ST 1
ST 1
A B C D
COLUMN TABLE C D
FOR OFFICIAL USE ONLY.
A B
The following assumptions are taken into consideration in TYPE C1 (1'-0"X1'-0") C2 (1'-0"X1'-0")
33'-0" LEVEL 10'-0" 10'-9" 11'-3"
These notes apply to all drawings. the seismic resistant analysis and design of structures: 10'-0" 10'-9" 11'-3" 5'-0"
1'-0" 9'-0" 1'-0" 9'-9" 1'-0" 10'-3" 1'-0"
GROUND
1. All structural drawings shall be read in conjunction with the architectural, plumbing and 1) Adequate supervision and quality control mechanism FLOOR 8-Ø16 8-Ø16
1 1
electrical drawings. The contractor shall check all drawings and verify levels and dimensions in shall apply during construction.
1'-0"
1'-0"
1 1 F1 F.Beam F1 F.Beam F1 Strap Beam
F1
C2 P.Beam C2 P.Beam C2 P.Beam C2
advance of the work and report any discrepancies to the supervisor / engineer immediately. (0'9"x1'0") (0'9"x1'0") (0'9"x1'0") (0'9"x0'9") (0'9"x0'9") (1'2"x1'10")
(0'9"x1'0")
(0'9"x1'0")
(0'9"x1'0")
(0'9"x1'0")
P.Beam
P.Beam
P.Beam
2) Construction is carried out by personnel having the FIRST
P.Beam
4-Ø16
FLOOR 8-Ø16 4-Ø12
(0'9"x0'9")
(0'9"x0'9")
appropriate skill and experience.
(0'9"x0'9")
(0'9"x0'9")
2. Unless noted otherwise, all levels refer to the top of structural concrete.
F.Beam
F.Beam
F.Beam
F.Beam
12'-9"
12'-9"
12'-9"
11'-9"
11'-9"
12'-9"
3. No measurement shall be directly taken from the print. Written dimensions shall be followed. 3) Construction materials and products confirm to the SECOND 4-Ø16 4-Ø16
pertinent codes and specifications. 4-Ø12 4-Ø12 Strap Beam
FLOOR
P.Beam (1'2"x1'10")
P.Beam P.Beam
4. The contractor shall obtain the engineer's approval to all excavation before placing any blinding (0'9"x1'0")
C2 (0'9"x1'0") C1 (0'9"x1'0") C1 C2 LATERAL TIES Ø8@ 4"c/c - End section of column 2 2
27'-0"
27'-0"
1'-0"
1'-0"
layer or reinforcement. 4) The structure is adequately maintained. 2 2 Ø8@ 6"c/c - Mid section of column F1 F.Beam F2 F.Beam F2 F1
(0'9"x0'9") (0'9"x0'9")
(0'9"x1'0")
(0'9"x1'0")
(0'9"x1'0")
P.Beam
P.Beam
P.Beam
6'-0"
5) The structure is used in accordance with service planned
(0'9"x1'0")
5. All concrete work shall confirm with the building code requirements for reinforced concrete (IS
P.Beam
Strap Beam
Strap Beam
(1'2"x1'10")
(1'2"x1'10")
Strap Beam
(1'2"x1'10")
Strap Beam
(1'2"x1'10")
456-2000) as shown in architectural drawings.
13'-3"
13'-3"
2'-0"
13'-3"
12'-3"
12'-3"
13'-3"
6. Concrete strengths i.e. 28 days characteristic compressive strength (Cube)adopted is M20 for all F.Beam
F.Beam Strap Beam
structural 9" (0'9"x0'9") (0'9"x0'9")
(1'2"x1'10")
9" P.Beam P.Beam F1 F1 F1 F1
Concrete. 3-12Ø(C) P.Beam
(0'9"x1'0") (0'9"x1'0") (0'9"x1'0")
3-12Ø(C) C2 C1 C1 C2 3 3
1'-0"
1'-0"
3 3
1'
7. HYSD bars confirm with the Indian Standard and to be Fy 500 Grade shall be used for all 2L-8Ø @ 4" C/C 2L-8Ø @ 4" C/C 10'-0" 10'-9" 11'-3"
1'-0" 9'-0" 1'-0" 9'-9" 1'-0" 10'-3" 1'-0"
reinforcing steel. 3-12Ø(C) 3-12Ø(C) 10'-0" 10'-9" 11'-3" D
EDGE SECTION EDGE SECTION 33'-0" FOUNDATION TABLE A B C
8. Bar Marks indicate the size and spacing of reinforced bar.
e.g. 12Ø@6"c/c
(1" = 2' 0")
9"
(1" = 2' 0") A B C D FOUNDATION TYPE LENGTH BREADTH DEPTH REINFORCEMENT D-Edge D-Overall
Trench and Foundation tie beam plan
9" FOUNDATION -F1 5' 0" 5' 0" 5'-0" 12Ø @ 5" C/C BOTH WAYS 0' 8" 1' 10" Scale: 1" = 8' 0"
Ø 12 @6" c/c 3-12Ø(C)
3-12Ø(C) column layout and plinth tie beam plan FOUNDATION -F2 6' 0" 6' 0" 6'-0" 12Ø @ 5" C/C BOTH WAYS 0' 8" 1' 10"
Diameter 12mm At 6 inch center to center distance Scale: 1" = 8' 0"
1'
2L-8Ø @ 6" C/C 2L-8Ø @ 6" C/C
11. Strength design of all RCC structural members are based on IS 456:2000. SECTIONS OF PLINTH TIE SECTIONS OF FOOTING TIE 12mm Ø bars
BEAM BEAM @ 5" c/c both ways 5'
12. Reinforcement details and special details for bond, shear, and confinement along with assurance
of sufficient ductility is provided based on IS 13920:1993. Y
13. Clear cover for RCC element in contact of soil/water whall be 40mm: cover for other elements 6' F2 4" 1' 4"
4"
X X X X
5'
shall be based on the provisions of IS 456: 2000 for durability considerations.
1'-2"
1'-2"
9"
6'
1'
4-16Ø(C)
14. Time for removal of form work (refer to specification)
9"
1'
4"
Beam Sides, Wall and Column (unloaded) 24 Hrs 4L-8Ø @ 4" C/C
1'-10"
6'
SECTIONS OF STRAP BEAM @ 5" c/c both ways
@ 5" c/c both ways
15. Cover to reinforcements(Clear Cover): FOR FOUNDATION F2
Footing Bars : 50 mm (2") FOUNDATION PLAN OF F1
Foundation Beam: 40 mm (1 12") 6' WITH FOUNDATION BEAM
Columns: 40 mm (1 12") FOUNDATION PLAN OF F2 (1" = 2'0")
1'
PLINTH
TIE BEAM 12mm Ø bars P.L.
9" x 12" @ 5" c/c both ways
1'
1'
9"Thick
2'
Brick Wall
2'
2'
F1
4"
4"
G.L.
C C
9"
9"
5'
1'
1'
3"
8 Ø min. G.L.
4"
4"
4'2"
3'-7"
FOUNDATION
FOUNDATION
TIE BEAM
TIE BEAM FOUNDATION
6'
9" x 9" TIE BEAM
6'
3" lean concrete base
9"
one layer flat brick soling 5' 4" 4"
4" 4"
1'-9" Y 12mm Ø bars @ 5" c/c both ways
1'-2"
1'-2"
4-16Ø(C)
12mm Ø bars @ 5" c/c both ways
1'-10"
50Ø of bars
8"
8"
(1" = 2'0") 3" lean concrete base
3" lean concrete base
5"
2'-9"
5"
Ø8mm@
4"C/C
(1" = 2'0")
Ø8mm @
Zone of main
3-12Ø(C)
6"C/C
6"
3-12Ø(C)
V
2'
Slab
2'-9"
L L Floor Beam
G.L.
1'-2"
Ø8mm @4"C/C
Lintel Band
5'
12mm Ø bars @ 5" c/c both ways
STRAP BEAM
2'-9"
3-12Ø(C)
Building Type: Location:
9"
3"
COLUMN REINFORCEMENT DETAILS
12mm Ø bars @ 5" c/c both ways Plot No: Plot Area:
710,711,713 143.08 Sq. M. (0-4-2-0)
Plinth Beam
Job Title: Scale:
Ground Level SECTION AT V-V
9"