Professional Documents
Culture Documents
ĐỀ CƯƠNG KHOAN CẤY THÉP RAMSET - NGUYỄN ĐĂNG
ĐỀ CƯƠNG KHOAN CẤY THÉP RAMSET - NGUYỄN ĐĂNG
- Khoan tạo lỗ theo ñường kính veà chiều saâu thiết kế.
- Hole Depth and Hole Diameter are drilled as designed.
Chieàu saâu loã
Đường kính theùp Đường kính lỗ khoan
khoan
Rebar Diameter Drilled Hole Diameter
Drilled Hole Depth
(mm) (mm)
(mm)
10 14 100
12 16 120
14 18 140
16 20 160
18 22 180
20 25 200
22 28 220
25 30 250
28 35 280
32 38 320
- Bơm hoùa chất từ ñaùy lỗ (Dung tích khoảng 2/3 ñộ saâu lỗ)
- The chemical must be injected from the bottom of the
drilled hole
(The injection volume is around 2/3 of drilled holes)
6./ Baûng theo doõi thôøi gian ninh keát hoùa chaát RAMSET G5 PRO
6./ Temperature Scheme
Böôùc 2:
Step 2:
- Gia taûi löïc ñeàu tay, lieân tuïc ñeán löïc thieát keá theo baûng tính cuûa nhaø cung
caáp.
- Apply the load gradually and continuously by pressing the Jack Arm until reaching
the load as designed
- (Tham khaûo theo Baûng Löïc cho töøng ñöôøng kính theùp töông öùng )
- ( See the Load Table for each of rebar diameter accordingly)
Böôùc 3:
Step 3:
- Chôø 30 giaây cho heä thoáng keùo oån ñònh.
- Waiting 30 seconds for the Hydraulic System gets back stable
Böôùc 4:
Step 4:
- Tieán haønh ghi laïi keát quaû ño ñöôïc treân thieát bò ño, sau ñoù xaû taûi.
- Recording the load result from the measuring equipment and then realeasing the Hydraulic Jack.
QUY TRÌNH THI CÔNG VÀ NGHIỆM THU THÉP KHOAN CẤY VÀO BÊTÔNG BẰNG
HÓA CHẤT CẤY THÉP RAMSET G5 PRO