Professional Documents
Culture Documents
Tutorial Letter 101/3/2023: Introduction To Project Management
Tutorial Letter 101/3/2023: Introduction To Project Management
Semesters 1 & 2
IMPORTANT INFORMATION
All assessments for this module can only be completed online.
Please activate your myLife e-mail address, register on myUnisa and make sure
that you have regular access to the myUnisa module website, PRM3701-2023-
S1/S2.
BARCODE
PRM3701/101/3/2023
CONTENTS
Page
1 INTRODUCTION .......................................................................................................................... 4
2 OVERVIEW OF PRM3701 ............................................................................................................ 5
2.1 Purpose ........................................................................................................................................5
2.2 Outcomes ..................................................................................................................................... 5
3 LECTURER AND CONTACT DETAILS ....................................................................................... 6
3.1 Contacting the lecturer .................................................................................................................. 6
3.2 Contacting the Department of Operations Mangement ................................................................. 7
3.3 Contacting the University .............................................................................................................. 7
3.4 Contacting your fellow PRM3701 students.................................................................................... 7
4 MODULE-RELATED RESOURCES ............................................................................................. 7
4.1 Prescribed book ............................................................................................................................ 7
4.2 Recommended books ................................................................................................................... 8
4.3 Electronic Reserves (e-Reserves)................................................................................................. 8
5 STUDENT SUPPORT SERVICES ................................................................................................ 8
5.1 Joining myUnisa ......................................................................................................................... 8
5.2 Important notice on Curriculum Transformation ...................................................................... 9
5.3 Printed support material............................................................................................................. 9
5.4 Library services and resource information ............................................................................. 10
5.5 E-tutors ...................................................................................................................................... 10
5.6 Predatory providers of classes ................................................................................................ 11
5.7 TVET Agreements ..................................................................................................................... 11
5.8 Additional information .............................................................................................................. 11
6 HOW TO STUDY FOR THE PRM3701 MODULE....................................................................... 11
6.1 What does it mean to study online? ........................................................................................ 11
7 CONTINUOUS ASSESSMENT .................................................................................................. 12
7.1 General remarks ....................................................................................................................... 12
7.2 Submission of assignments..................................................................................................... 12
7.3 Compulsory assignments ........................................................................................................ 12
7.4 Final mark .................................................................................................................................. 14
7.5 Format of the assignments ...................................................................................................... 15
8 NEW LANGUAGE POLICY ........................................................................................................ 16
9 FREQUENTLY ASKED QUESTIONS (FAQS) ........................................................................... 16
10 CONCLUDING REMARKS......................................................................................................... 17
2
PRM3701/101/3/2023
Please note:
This tutorial letter should be read in conjunction with the Study @ Unisa brochure and Tutorial Letter
2023 and the study guide for this module.
In order to complete this course successfully, you must register for and use myUnisa (see the Study @
Unisa brochure for details) as this will give you direct access to important information and allow you to
perform tasks such as updating your personal information, submitting assignments, confirming receipt of
assignments, obtaining assignment marks, joining online discussion forums and many more. It is also
important that you activate your myLife e-mail address and make sure that you have regular access to
the PRM3701-2023-S1 or PRM3701-2023-S2 myUnisa module sites.
3
PRM3701/101/3/2023
1 INTRODUCTION
Dear Student
Welcome to the module PRM3701 entitled Introduction to Project Management.
Moithuti
O amogetšwe motšulong wa PRM3701 wa hlogo ya Introduction to Project Management.
Mfundi othandekayo
Uyemukelwa kwimojuli ye-PRM3701 enesihloko esithi Introduction to Project Management
Beste Student
Welkom by die module PRM3701 getiteld, Intorduction to Project Management.
Students, who successfully complete this module, will be able to equip themselves with the
necessary competence to discharge all the responsibilities of a project manager. At the end of
this module, the qualifying student should be able to apply project management principles in
practice.
So, try to apply the theory in practice by applying it to your experiences of managing people and
to how you have been managed as a person, or just enjoy integrating the subject matter into
your work! In order to be successful in this module, you will need to work continuously
throughout the semester and resolve to do the assignments properly. Because this is a fully
online module, with continuous assessment, you will need to use myUnisa to study and
complete the formative assessments for this course. You will, therefore, need to visit the module
site on myUnisa for PRM3701 frequently. The module site for Semester 1 is PRM3701-2023-
S1, and the site for Semester 2 is PRM3701-2023-S2. In addition to this tutorial letter, you will
also receive printed copies of some of the online study material for your module.
This tutorial letter refers to the module Project Management (PRM3701) and contains module-
specific information related to the study material for the module, the purpose of and outcomes
for the module, relevant contact details, module-related resources, student support services, a
module-specific study plan, assessment and frequently asked questions. As this module is
offered online, it is important that you read this tutorial letter thoroughly, keep it in a safe place
4
PRM3701/101/3/2023
and then log on to the myUnisa site for this module. Over and above the inventory letter and
other items, you should also have received the brochure, Study @ Unisa, which contains
important information. This brochure is also available on myUnisa.
The Directorate: Despatch should supply you with the following tutorial matter for this module:
Note: Some of this tutorial matter may not be available when you register. This tutorial matter
will be posted to you as soon as possible, but is also available on myUnisa. While the printed
material may appear different from the online study material, it is the same, as it has been
copied from the myUnisa website.
You will need to use myUnisa to study and complete some of the learning activities for this
course. Go to the website at https://my.unisa.ac.za and log in using your student number and
password. You will see PRM3701-23-S1 (for semester 1 students) or PRM3701-23-S2 (for
semester 2 students) in the row of modules displayed in the orange blocks at the top of the
webpage. Select the More tab if you cannot find the module you require in the orange blocks.
Then click on the module you wish to open.
2 OVERVIEW OF PRM3701
2.1 Purpose
Students, who successfully complete this module, will be able to equip themselves with the
necessary competence to discharge all the responsibilities of a project manager. At the end of
this module, the qualifying student should be able to apply project management principles in
practice.
This module is delivered using myUnisa and the internet. Peer group interaction and community
engagement are also included in some of the activities. I will interact with you on myUnisa and
via e-mail.
2.2 Outcomes
For this module, we hope you will be able to familiarise yourself with the core aspects of project
management and the tools and techniques used. Therefore, this will enable you to quickly
become a useful and productive member of a project team in your chosen industry and
profession. The workplace for the active project manager can be an immensely satisfying and a
rewarding one; conversely, it can also be hard and unforgiving. Project management implies
taking on a lot of responsibility and, therefore, stakeholders will be looking to you to produce
project results.
5
PRM3701/101/3/2023
This module will provide many pertinent insights into the discipline of project management and
thereby also help you to decide whether project management is a good career choice for you.
For this module, you will have to master the following outcomes:
• Specific outcome 1: Students must understand what the “life” of a project entails,
including general project management concepts, needs identification, proposed
solutions and project implementation.
• Specific outcome 2: Students must understand certain selected project planning and
control tools and techniques, including project planning, project scheduling, project
schedule control, project resource considerations and project cost planning and
performance.
I’m your lecturer for this module and these are my details:
You may also contact me lecturer via the Operations Mangement helpdesk (see details in
section 3.2 below) or via the Course Contact option on myUnisa. You’ll find this option on the
left-hand side once you have logged on to the PRM3701 myUnisa module. Please do not send
the same message to both the helpdesk and via the course contact option on the
myUnisa module site this may cause delays as we have to respond to duplicate
enquiries.
Please address all correspondence about academic matters, such as enquiries about the
contents of assignments, to me. Administrative enquiries should be directed to the relevant
department. Always write your student number and the module code at the top of any
6
PRM3701/101/3/2023
correspondence to the University. If you contact me by e-mail always include the module code
and your student number in the subject line.
I will be available to take phone calls on academic matters and/or to attend to students who may
prefer to visit personally for academic engagement. However, the days and times that I am
available will be communicated on the welcome page on myUnisa. These days and times may
change from time to time in order to accommodate the lecturer’s work schedule and other
commitments. I will communicate the changes to the days and times in advance by sending an
announcement on myUnisa as and when this happens. Students are advised to check the
welcome page on myUnisa and the announcements sent out before making phone calls or
visiting the lecturer’s office for academic enquiries/engagements.
You can contact the lecturers by telephone or e-mail via the Department of Operations
Management’s helpdesk. The details are as follows:
To contact the University, follow the instructions in the Study @ Unisa brochure. Remember to
have your student number available whenever you contact the University. Whenever you write
to a lecturer, please include your student number to enable the lecturer to help you more
effectively. For academic enquiries related to the institution and not specifically related to
this module, use the following number: 012 429 4239.
On myUnisa we have created discussion forums for you to interact with your fellow students and
the lecturer. Visit the discussion forums regularly to engage in discussions with your fellow
students regarding the module.
4 MODULE-RELATED RESOURCES
4.1 Prescribed book
There is one PRM3701 prescribed book for this module that you need to use, namely:
7
PRM3701/101/3/2023
Larson, EW & Gray, CF. 2018. Project management: the managerial process. 7th edition.
New York: McGraw Hill/Irwin. (ISBN: 9781259253874)
Note: It is essential that you either acquire or make sure you have access to the prescribed
textbook. We recommend that you purchase the prescribed book as you will have to study it
thoroughly and refer to it frequently. We suggest that you try to obtain the book as soon as
possible.
Prescribed books can be obtained from the university’s official booksellers. Access myUnisa for
the official booksellers that stock this book: Go to the myUnisa webpage (http://my.unisa.ac.za),
click on Prescribed books on the left and type in the relevant module code. Once you click on
Display, you will find information on the prescribed book for the particular module as well as
information on the booksellers. Information on the booksellers is also available in Study @
Unisa. Alternatively, you can log on to the PRM3701 module site on myUnisa and click on the
Prescribed Books link on the left-hand side:
If you have difficulty obtaining the prescribed book from these booksellers, please contact the
Unisa Prescribed Book Section as soon as possible at telephone number 012 429 4152 or send
an e-mail to vospresc@unisa.ac.za for assistance.
If you have access to a computer that is linked to the internet, you can quickly access resources
and information at the University. The myUnisa learning management system is the University's
online campus that will help you communicate with your lecturers, with other students and with
the administrative departments at Unisa – all through the computer and the internet.
You can start at the main Unisa website at http://www.unisa.ac.za and then click on the
myUnisa orange block. This will take you to the myUnisa website. To go to the myUnisa website
directly, go to https://my.unisa.ac.za. Click on the Claim UNISA Login on the right-hand side of
the screen on the myUnisa website. You will then be prompted to give your student number in
order to claim your initial myUnisa details as well as your myLife e-mail login details.
For more information on myUnisa, consult the Study @ Unisa brochure which is available on
myUnisa: www.unisa.ac.za/brochures/studies
This brochure has all the tips and information you need to succeed at distance learning and,
specifically, at Unisa.
8
PRM3701/101/3/2023
“Unisa has implemented a transformation charter based on five pillars and eight dimensions. In
response to this charter, we have placed curriculum transformation high on the teaching and
learning agenda. Curriculum transformation includes the following pillars: student-centred
scholarship, the pedagogical renewal of teaching and assessment practices, the scholarship of
teaching and learning, and the infusion of African epistemologies and philosophies. These
pillars inform the curriculum transformation standards as outlined in the Curriculum
Transformation Guidelines developed by the Curriculum Transformation Unit following the
analysis of Colleges Curriculum Transformation Frameworks. The curriculum transformation
standards will be integrated at both programme and module levels as a phased-in approach.
You will notice a marked change in the teaching and learning strategy implemented by Unisa,
together with how the content is conceptualised in your modules. We encourage you to
embrace these changes during your studies at Unisa in a responsive way within the framework
of transformation”.
Please find a glossary under additional resoucres for all Project Management
terminology in the different languages.
At UNISA we pledge to do the following:
Because we want you to be successful in this module, we also provide you with some of the
study material in printed format. This will allow you to read the study material even if you are not
online.
The printed study material will be sent to you at the beginning of the semester, but you do not
have to wait for it before you start studying – you can go online as soon as you have registered
and find all your study material there. The material we will send you is an offline copy of the
formal content for the module. Having an offline copy will enable you to study for this module
WITHOUT having to use the internet or to go to an internet café. It will save you time and
money, and you will be able to read and re-read the material and start doing the activities.
It is imperative that you log into myUnisa regularly. I recommend that you log in at least once a
week or every 10 days to do the following:
• Check for new announcements. You can also set your myLife e-mail account to receive
the announcement e-mails on your cellphone.
• Do the Discussion Forum activities. When you complete certain activities in each
workbook, I want you to share your answers with the other people in your group. You can
9
PRM3701/101/3/2023
read the instructions and even prepare your answers offline, but you will need to go online
to post your messages.
I hope that by giving you extra ways to study the material and practise all of the activities, this
system will help you succeed in the module. To get the most out of the course you MUST go
online regularly to complete the activities and assignments on time.
Remember, the printed support material is back-up material for everything that is found online
on myUnisa. It does not contain any extra information. In other words, do NOT wait for the
printed support material to arrive before you start studying.
5.5 E-tutors
Please be informed that, with effect from 2013, Unisa started offering online tutorials (e-tutoring)
to students registered for modules at NQF levels 5, 6 and 7 (qualifying first-year, second-year
and third-year modules).
Once you have been registered for PRM3701, you will be allocated to a group of students with
whom you will be interacting during the tuition period as well as an e-tutor who will be your
tutorial facilitator (high risk modules). Thereafter you will receive an sms informing you about
your group, the name of your e-tutor and instructions on how to log onto myUnisa in order to
receive further information on the e-tutoring process.
Online tutorials are conducted by qualified e-tutors who are appointed by Unisa and are offered
free of charge. All you need to be able to participate in e-tutoring is a computer with an internet
connection. If you live close to a Unisa Regional Centre or a Telecentre contracted with Unisa,
you are welcome to visit any of these to access the internet. E-tutoring takes place on myUnisa
where you are expected to connect with other students in your allocated group. It is the role of
the e-tutor to guide you through your study material during this interaction process. In order to
get the most out of online tutoring, you need to participate in the online discussions that the e-
tutor will be facilitating.
10
PRM3701/101/3/2023
Please be aware of the existence of multiple fraudulent and predatory providers of classes and
guidance to Unisa students. Please note that Unisa does not have agreements with any of
these agencies/schools/colleges to provide tuition or support to our students. Unisa also does
not provide these predators with study material, guidelines or your contact information.
These providers may not have the necessary expertise to assist you and often charge
exorbitant fees. If you receive an invitation from any agency or College, it is best to confirm with
your lecturer if the provider is a legitimate Unisa partner.
5.7 TVET Agreements
Unisa, however, has agreements with a number of technical and vocational education and
training (TVET) Colleges to provide contact tuition and support for students in the following
Higher Certificates:
• Higher Certificate in Economic & Management Sciences
• Higher Certificate in Banking
• Higher Certificate in Tourism
• Higher Certificate in Accounting Sciences
For information on the various student support systems and services available at Unisa (e.g.
student counselling, tutorial classes and language support), please consult the Study @ Unisa
brochure.
Studying for this module may differ from studying some of your other modules at Unisa.
• All your study material and learning activities for online modules are designed to be
delivered online on myUnisa. Although we give you a printed copy to support your
studies, the module is designed to be delivered online.
• All of your assignments must be submitted online. This means that you do all your
activities and submit all your assignments on myUnisa. In other words, you may NOT post
your assignments to Unisa using the South African Post Office.
• All of the communication between you and the University happens online. Lecturers
will communicate to you by e-mail, and using the Announcements and the Discussion
Forums tools. You can also use these ways to ask questions and contact your lecturers.
11
PRM3701/101/3/2023
7 CONTINUOUS ASSESSMENT
PRM3701 is a “continuous assessment module” and therefore does not make use of a final
summative examination. Instead, for this module, all of your assignments will contribute towards
your final result. Each of the assignments contributes a certain percentage (indicated as a
weight below) towards the final result, so you are able to manage your own learning throughout
the semester.
There will be six assignments for this module, all contributing towards your final mark. All six
assignments are online assignments which you will complete on myUnisa. Pay attention to the
assessment criteria for each assignment as these criteria will help you to understand what is
required of you.
You can only complete your assignments for this module electronically via myUnisa. Please do
NOT wait until the last date provided before you complete your assignments on myUnisa,
as the system might be very busy or down for routine maintenance.
PLEASE NOTE:
You cannot submit or post a paper copy of your assignment. You also CANNOT email
copies of your assignment to your lecturer.
There are SIX compulsory assignments for this module. There are non-negotiable submission
deadlines for each of these six assignments. Although it is open book assignments, you will
need to study the work before attempting to complete the assignments. As it is a timed
assessment, you will not have time to look for the answers in your study material.
Specific due dates have been determined for the assignments. A few weeks after the due date
of written assignments tutorial letters (Tutorial Letter 201 and Tutorial Letter 202) will be made
12
PRM3701/101/3/2023
available on myUnisa with the answers and guidelines for those assignments. The due dates of
the compulsory assignments and their unique numbers are reflected below.
In answering your assignment you are required to read the content of your module as well as
additional readings provided in the open educational resources (OERs) and massive open
online courses (MOOCs). You will be required to complete cetain content before you can
access your assignments.
Please note that all assignments can be found online on myUnisa. These assisgnments
will be made available during the course of the semester, and an announcement will be
sent out each time an assignment is uploaded. All the assignments will NOT be available
at the beginning of each semester.
FIRST SEMESTER
Assignment
number Type of Contribution to
Due date Assessment Feedback final mark
13
PRM3701/101/3/2023
SECOND SEMESTER
Assignment
number Type of Contribution to
Due date Assessment Feedback final mark
The marks obtained for all six compulsory assignments contribute 100% towards your final
mark; there is no formal examination for this module. The combined weighted averages of
your assignment marks must be 50% or higher for you to pass the module.
For example:
Assignment
Assignment name contribution to final Your mark
mark (weight)
Assignment 01 10% 60%
Assignment 02 10% 80%
Assignment 03 30% 40%
Assignment 04 10% 50%
Assignment 05 10% 60%
Assignment 06 30% 80%
= 06 + 08 + 12 + 5 + 6 + 24
= 61%
You will need a final mark of at least 40% to qualify for a supplementary opportunity.
Assignment 01
Assignment 01 comprises of multiple-choice questions. In Assignment 01 you are required to
select the most appropriate option from options 1 to 4. Choose the option you think is the
correct (most appropriate) one. In other words, if you think that option 4 in question 1 is correct,
then select option 4 next to the appropriate question number (in this case it is question 1). If you
need assistance with answering multiple-choice questions, refer to the Study @ Unisa brochure.
Use the Online-Assessment tool available on the PRM3701 module site to submit your
multiple-choice question assignment. This assignment will be completed online. Feedback
for Assignment 01 will be provided online.
Assignment 02
Assignment 02 comprises of multiple-choice questions. In Assignment 02 you are required to
select the most appropriate option from options 1 to 4. Choose the option you think is the
correct (most appropriate) one. In other words, if you think that option 4 in question 1 is correct,
then select option 4 next to the appropriate question number (in this case it is question 1). If you
need assistance with answering multiple-choice questions, refer to the Study @ Unisa brochure.
Use the Online-Assessment tool available on the PRM3701 module site to submit your
multiple-choice question assignment. This assignment will be completed online. Feedback
for Assignment 01 will be provided online.
Assignment 03
Assignment 03 contains essay questions and case studies..
This assignment will be uploaded under the Additional Resources tool on the PRM3701
module site. You can type your assignment on any word processor and then convert it to pdf.
Assignment 03 can only be submitted in pdf format. No other formats will be accepted. This
assignment should be submitted online. Feedback on Assignment 03 will be provided in
Tutorial letter 201, which will be available on myUnisa a few weeks after the due date of this
assignment.
Assignment 04
Assignment 04 comprises of multiple-choice questions. In Assignment 04 you are required to
select the most appropriate option from options 1 to 4. Choose the option you think is the
correct (most appropriate) one. In other words, if you think that option 4 in question 1 is correct,
15
PRM3701/101/3/2023
then select option 4 next to the appropriate question number (in this case it is question 1). If you
need assistance with answering multiple-choice questions, refer to the Study @ Unisa brochure.
Use the Online-Assessment tool available on the PRM3701 module site to submit your
multiple-choice question assignment. This assignment will be completed online. Feedback
for this assignment will be provided online
Assignment 05
Assignment 05 comprises of multiple-choice questions. In Assignment 05 you are required to
select the most appropriate option from options 1 to 4. Choose the option you think is the
correct (most appropriate) one. In other words, if you think that option 4 in question 1 is correct,
then select option 4 next to the appropriate question number (in this case it is question 1). If you
need assistance with answering multiple-choice questions, refer to the Study @ Unisa brochure.
Use the Online-Assessment tool available on the PRM3701 module site to submit your
multiple-choice question assignment. This assignment will be completed online. Feedback
for Assignment 05 will be provided online.
Assignment 06
Assignment 06 contains essay questions and case studies.
This assignment will be uploaded under the Additional Resources tool on the
PRM3701module site. You can type your assignment on any word processor and then convert it
to pdf. Assignment 06 can only be submitted in pdf format. No other formats will be accepted.
This assignment should be submitted online. Feedback on Assignment 06 will be provided
in Tutorial letter 202, which will be available on myUnisa a few weeks after the due date of this
assignment.
Unisa has introduced a new language policy which states that the recently developed modules
will be offered in English only. This applies to PRM3701 Therefore, all official study material
(workbooks, tutorial letters, etc.) will be provided in English only. You are also required to submit
your assignments in English. All other communication (Discussion Forums on myUnisa, e-mail
correspondence, self-assessment questions on myUnisa, and e-tutor forums) will also be
provided in English only.
On the PRM3701 myUnisa module site you will find a number of questions frequently asked by
students. To access these questions go to the PRM3701 module site and click on the FAQ tool
(it appears on the left hand side on the screen).
Before contacting Unisa, read these FAQs as you may find the answer to your question there.
Remember to look at the FAQs regularly as I will add more questions as the semester
progresses – they may even be ones that you have asked. Also consult the Study @ Unisa
brochure before you contact the university, as most of your questions will be answered in this
brochure.
16
PRM3701/101/3/2023
10 CONCLUDING REMARKS
You are now ready to begin the module Introduction to Project Mangement. We trust you will
approach your studies with enthusiasm and commitment. You are welcome to contact me
should you experience any problems with your studies.
We trust that you will make the most of this opportunity to study Introduction to Project
Management and wish you all the best with your studies.
Ons vertrou dat u die beste gebruik sal maak van hierdie geleentheid om Algemene Bestuur te
bestudeer en ons wens u net die beste vir u studies toe. Ek en die e-tutors sien uit daarna om u
vennote te wees in hierdie onderneming.
Re tshepa gore o tla šomiša monyetla wo go ithuta Introduction to Project Management gomme
re go lakaletša tše dibotse ka moka dithutong tša gago. Nna le dii-tšhuta tša lena re lebeletše
go ba bašomišani tekong ye.
Miss Z AZIZ
DEPARTMENT OF OPERATIONS MANAGEMENT
UNISA
17
Appendix A PRM3701/101/3/2023
The mark obtained for Assignment 01 will contribute 10% to your final mark for this module.
This assignment should be submitted on or before the due date.
Use the Online-Assessment tool available on the PRM3701 module site to find and
submit your multiple-choice question assignment. This assignment will be available
and must be completed online.
Please note that only online feedback on this assignment will be provided.
18
Appendix A PRM3701/101/3/2023
The mark obtained for Assignment 02 will contribute 10% to your final mark for this module.
This assignment should be submitted on or before the due date.
Use the Online-Assessment tool available on the PRM3701 module site to find and
submit your multiple-choice question assignment. This assignment will be
available and must be completed online.
Please note that only online feedback on this assignment will be provided.
19
Appendix A PRM3701/101/3/2023
The mark obtained for Assignment 03 will contribute 30% to your final mark for this module.
This assignment should be submitted on or before the due date.
Use the Additional Resources tool available on the PRM3701 module site to find
your written assignment. This assignment will be available and must be completed
online.
You can type your assignment on any word processor and then convert it to an Adobe
Acrobat (pdf) document. Assignment 03 can only be submitted in pdf format. No other
formats will be accepted. This assignment should be submitted online.
20
Appendix B PRM3701/101/3/2023
The mark obtained for Assignment 04 will contribute 10% to your final mark for this module.
This assignment should be submitted on or before the due date.
Use the Online-Assessment tool available on the PRM3701 module site to find and
submit your multiple-choice question assignment. This assignment will be available
and must be completed online.
Please note that only online feedback on this assignment will be provided.
21
Appendix A PRM3701/101/3/2023
The mark obtained for Assignment 05 will contribute 10% to your final mark for this module.
This assignment should be submitted on or before the due date.
Use the Online-Assessment tool available on the PRM3701 module site to find and
submit your multiple-choice question assignment. This assignment will be available
and must be completed online.
Please note that only online feedback on this assignment will be provided.
22
Appendix A PRM3701/101/3/2023
The mark obtained for Assignment 06 will contribute 30% to your final mark for this module.
This assignment should be submitted on or before the due date.
Use the Additional Resources tool available on the PRM3701 module site to find
your written assignment. This assignment will be available and must be completed
online.
You can type your assignment on any word processor and then convert it to an Adobe
Acrobat (pdf) document. Assignment 06 can only be submitted in pdf format. No other
formats will be accepted. This assignment should be submitted online.
23
Appendix B PRM3701/101/3/2023
The mark obtained for Assignment 01 will contribute 10% to your final mark for this module.
This assignment should be submitted on or before the due date.
Assignment 01 requires you to answer the MOOC for Project Management on the UNISA
MOOC platform. Please follow the instructions below.
Use the Online-Assessment tool available on the PRM3701 module site to find and
submit your massignment. This assignment will be available and must be completed
online.
Please note that only online feedback on this assignment will be provided.
24
Appendix A PRM3701/101/3/2023
The mark obtained for Assignment 02 will contribute 10% to your final mark for this module.
This assignment should be submitted on or before the due date.
Use the Online-Assessment tool available on the PRM3701 module site to find and
submit your multiple-choice question assignment. This assignment will be available
and must be completed online.
Please note that only online feedback on this assignment will be provided.
25
Appendix B PRM3701/101/3/2023
The mark obtained for Assignment 03 will contribute 30% to your final mark for this module.
This assignment should be submitted on or before the due date.
Use the Additional Resources tool available on the PRM3701 module site to find
your written assignment. This assignment will be available and must be completed
online.
You can type your assignment on any word processor and then convert it to an Adobe
Acrobat (pdf) document. Assignment 03 can only be submitted in pdf format. No other
formats will be accepted. This assignment should be submitted online.
26
Appendix B PRM3701/101/3/2023
The mark obtained for Assignment 04 will contribute 10% to your final mark for this module.
This assignment should be submitted on or before the due date.
Use the Online-Assessment tool available on the PRM3701 module site to find and
submit your multiple-choice question assignment. This assignment will be available
and must be completed online.
Please note that only online feedback will be provided on this Assignment.
27
Appendix B PRM3701/101/3/2023
The mark obtained for Assignment 05 will contribute 10% to your final mark for this module.
This assignment should be submitted on or before the due date.
Use the Online-Assessment tool available on the PRM3701 module site to find and
submit your multiple-choice question assignment. This assignment will be available
and must be completed online.
Please note that only online feedback will be provided on this Assignment.
28
Appendix B PRM3701/101/3/2023
The mark obtained for Assignment 06 will contribute 30% to your final mark for this module.
This assignment should be submitted on or before the due date.
Use the Additional Resources tool available on the PRM3701 module site to find
your written assignment. This assignment will be available and must be completed
online.
You can type your assignment on any word processor and then convert it to an Adobe
Acrobat (pdf) document. Assignment 06 can only be submitted in pdf format. No other
formats will be accepted. This assignment should be submitted online.
29
Appendix C PRM3701/101/3/2023
31
Appendix C PRM3701/101/3/2023
WELCOME!
IMPORTANT NOTICE:
1) Please see below welcome message translated in Zulu, Sepedi and Afrikaans.
2) The exam is an online exam, and dates will be communicated over the MODULE SITE.
3) READ Tutorial letter PRM3701/101/3/2023.
4) READ THE TABS links on the left hand side
5.1) Lessons (indicated with a booklet) AND
5.2) Announcements (indicated with a megaphone)
6) Start with the WELCOME!! {start here} lesson.
Dear student
Welcome to the module PRM3701 entitled Introduction to Project Management. We will use the myUnisa module
website to direct you through the module.
Please note the following basics concerning PRM3701:
• Read through the relevant study materials (especially Tutorial letter 101) and familiarise yourself with the processes
and procedures at Unisa and with this module.
• Your studies should commence the moment you have access to the module site and purchased your prescribed book.
Make time for your studies throughout the semester, and keep to a study plan.
• Register and access your personal student email address (your myLife account). Any communication sent by the
University will be done to your myLife account ONLY.
• The content of the module is available as a PDF document under "Official Study Material" and under the “Learning
Units 2023” lesson tab.
We trust that you will make the most of this opportunity to study Introduction to Project Management and wish you all the best
with your studies..
Warm regards
Mrs Z Aziz
32
Appendix D PRM3701/101/3/2023
O AMOGETŠWE!
TSEBIŠO YE BOHLOKWA:
1) Tlhahlobo e onelaene, matšatšikgwedi a tla kwalakwatšwa go SETSHA SA MOTŠULO.
2) BALA Lengwalothuto la PRM3701/101/3/2023:
3) BALA DITHEPO (TABS) ka letsogong la nngele:
4.1) Dithuto (di bontšhitšwe ka pukwana) LE
4.2) Ditsebišo (bontšhitšwe ka segodišamodumo)
5) Thoma ka KAMOGELO! {thoma mo} thuto
Moithuti
O amogetšwe motšulong wa PRM3701 wa hlogo ya Introduction to Project Management. Re tla šomiša weposaete ya motšulo
ya myUnisa go go hlahla motšulong wo.
Ka kgopelo hlokomela metheo yeo e latelago mabapi le PRM3701:
• Bala dimateriale tša gago tša thuto (kudu Lengwalothuto la 101) gomme o itlwaetše le ditsela le ditshepedišo tša
Unisa le motšulo wo.
• Dithuto tša gago di swanetše go thoma nako ye o kgona go fihlelela setsha sa motšulo ebile o rekile le dipuku tša
kgothaletšo. Iphe nako ya dithuto tša gago semesetareng ka moka, gomme o obamele lenaneo la go ithuta.
• Ingwadiše o be o fihlelele emeile aterese ya gago bjalo ka moithuti (akhaonte ya gago myLife). Kgokagano ye nngwe
le ye nngwe yeo e romelwago ke Yunibesithi e tla dirwa FELA go akhaonte ya gago ya myLife.
• Diteng tša motšulo di gona ka tokomane ya PDF ka tlase ga thepo ya thuto "Official Study Material" le ya “Learning
Units 2023”.
Re tshepa gore o tla šomiša monyetla wo go ithuta Introduction to Project Management gomme re go lakaletša tše dibotse ka
moka dithutong tša gago. Nna le dii-tšhuta tša lena re lebeletše go ba bašomišani tekong ye.
Wa lena
Mrs Z Aziz
33
Appendix C PRM3701/101/3/2023
SIYAKWAMUKELA!
ISAZISO ESIBALULEKILE:
1) Ukuhlolwa kuhlolwa nge-inthanethi, futhi izinsuku zizokwaziswa ESAYITHINI
YEMOJULI.
2) FUNDA Incwadi yesifundo se-PRM3701/101/3/2023.
3) FUNDA AMATHEBHU angakwesokunxele:
4.1) Izifundo (ezikhonjiswe ngencwajana) FUTHI
4.2) Izimemezelo (ezikhonjiswe ngemegafoni)
5) Qala NGOKWAMUKELWA !! {qala lapha} isifundo.
Mfundi othandekayo
Uyemukelwa kwimojuli ye-PRM3701 enesihloko esithi Introduction to Project Management. Sizosebenzisa iwebhusayithi
yemojuli ye-myUnisa ukukuqondisa kwimojuli.
• Funda izincwadi ezifanele zokufunda (ikakhulukazi incwadi ethi Tutorial 101) bese uzijwayeze izindlela
nezinqubo ezise-Unisa kanye nale mojuli.
• Izifundo zakho kufanele ziqale lapho ufinyelela kwisayithi yemojuli futhi lapho uthenge incwadi yakho
oyinqunyelwe. Yenza isikhathi sezifundo zakho kuyo yonke isimesta, bese ugcina uhlelo lokufunda.
• Bhalisa futhi ufinyelele kwikheli lakho le-imeyili lomfundi (i-akhawunti yakho ye-myLife). Noma yikuphi
ukuxhumana okuthunyelwa yiNyuvesi kuzokwenziwa ku-akhawunti yakho ye-myLife KUPHELA.
• Okuqukethwe kule mojuli kuyatholakala njengombhalo we-PDF ngaphansi kwe- “Official Study Material”
nangaphansi kwethebhu yezifundo “Units Learning 2023”.
Siyethemba ukuthi uzolisebenzisa ngokugcwele leli thuba lokufunda i-General Management futhi sikufisela konke
okuhle ngezifundo zakho. Mina kanye nabafundisa nge-inthanethi sibheke phambili ekutheni sibe ngabalingani
bakho kulo msebenzi.
Ozithobayo
UNkk Z Aziz
34
Appendix D PRM3701/101/3/2023
WELKOM!
BELANGRIKE KENNISGEWING
1) Die eksamen is ’n aanlyneksamen en datums sal op die MODULEWEBWERF geplaas word.
2) LEES Studiebrief (Tutorial letter) PRM3701/101/3/2023.
3) LEES DIE OORTJIES (TABS) aan die linkerkant:
4.1) Lesse (Lessons) (aangedui met ’n boekie) EN
4.2) Aankondigings (Anouncements) (aangedui met ’n megafoon)
5) Begin met die Welkom!{begin hier}les (Welcome!{start here} lesson).
Beste Student
Welkom by die module PRM3701 getiteld, Intorduction to Project Management. Ons gaan die myUnisa-
modulewebwerf gebruik om u deur die module te lei.
Let asseblief op die volgende basiese inligting aangaande PRM3701:
• Lees die betrokke studiemateriaal (veral Studiebrief 101) en raak vertroud met die prosesse en prosedures by Unisa
en met hierdie module.
• U studies behoort te begin die oomblik wat u toegang verkry tot die modulewebwerf en u voorgeskrewe boek
aangeskaf het. Maak tyd vir u studies regdeur die semester en volg ’n studieplan.
• Registreer en kry toegang tot u persoonlike studente-e-posadres (u myLife-rekening). Enige kommunikasie wat deur
die universiteit gestuur word, sal SLEGS na u myLife-rekening gestuur word.
• Kontak asseblief u e-tutors deur middel van Besprekingsforums (Discussion Forums) of die vraag-en-antwoordfunksie
(op die e-tutorblad) en die dosente via e-pos.
• Die inhoud van die module is beskikbaar as ʼn PDF-dokument onder “Amptelike Studiemateriaal” (Official Study
Material) en onder die Leereenhede 2023 lesoortjie (Learning Units 2023 lesson tab).
E-posadres: E-tutors kan slegs gekontak word via die e-tutorblad (op ʼn
PRM3701@unisa.ac.za besprekingsforum en/of die vraag-en-antwoordfunksie)
Ons vertrou dat u die beste gebruik sal maak van hierdie geleentheid om Algemene Bestuur te bestudeer en ons wens u net die
beste vir u studies toe. Ek en die e-tutors sien uit daarna om u vennote te wees in hierdie onderneming.
Vriendelike groete
Me Z Aziz
35