Professional Documents
Culture Documents
Chenzhu Gs5000 Ex Isolated Barriers 2020
Chenzhu Gs5000 Ex Isolated Barriers 2020
3 Product Certificate
6 Digital Input
7 Digital Output
8 Analog Input
10 Analog Output
11 Temperature Converters
Contact:
Ms. Danping Li
M: +86-18121270307
Email: lidp@chenzhu-inst.com
Contents
3 Product Certificate
6 Digital Input
7 Digital Output
8 Analog Input
10 Analog Output
11 Temperature Converters
Contact:
Ms. Danping Li
M: +86-18121270307
Email: lidp@chenzhu-inst.com
CHENZHU COMPANY OVERVIEW R&D Strength
Based on ISO/IEC/GB standards, CHENZHU has established the professional laboratory which is applied up to 70 test
capabilities and verification items in CHENZHU's safety electrical products' development process.
Smart Factory
CHENZHU’s headquarter is located at Shanghai, China, with an area of 5000m².
CHENZHU factory is continually driven by lean management and flexible production. By our strict quality examination,
CHENZHU ensures the production meets the design specification and satisfies our customers.
Shanghai Chenzhu Instrument Co,Ltd. was founded in April, 2002, who was originated from Shanghai Institute of Process Automation
Instrumentation. CHENZHU is a professional company with core expertise of R&D, manufacturing and sale service of high quality safety
products, such as isolated barriers, signal conditioners, surge protective devices, safety relays etc.
1 SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com 2
CHENZHU COMPANY OVERVIEW R&D Strength
Based on ISO/IEC/GB standards, CHENZHU has established the professional laboratory which is applied up to 70 test
capabilities and verification items in CHENZHU's safety electrical products' development process.
Smart Factory
CHENZHU’s headquarter is located at Shanghai, China, with an area of 5000m².
CHENZHU factory is continually driven by lean management and flexible production. By our strict quality examination,
CHENZHU ensures the production meets the design specification and satisfies our customers.
Shanghai Chenzhu Instrument Co,Ltd. was founded in April, 2002, who was originated from Shanghai Institute of Process Automation
Instrumentation. CHENZHU is a professional company with core expertise of R&D, manufacturing and sale service of high quality safety
products, such as isolated barriers, signal conditioners, surge protective devices, safety relays etc.
1 SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com 2
China Ex Certificate Overview
3 SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com 4
China Ex Certificate Overview
3 SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com 4
Selection Guide Digital Input
GS5000-EX Range
2/2:GS5012-EX
1/2:GS5111-EX
Field instrument Application Module No. Channels Hazardous Side Signal Control Side Signal Features Page Digital input, relay output isolated barriers, transfer digital signals (dry
contact or NAMUR proximity switch) from hazardous area to safe area.
Digital GS5011-EX 1/1 Dry contact switch Relay contact output Independent powered 6
Each channel can be provided to select phase reversal and to enable line
Input
GS5012-EX 2/2 proximity switch input Configurable fault detection.The product needs an independent power supply and
GS5111-EX 1/2 galvanic isolation among power supply, input and output.
GS5013-EX 1/1 Transistor output 7
GS5019-EX 2/2
Specification
22K
Short-circuit Current:≈8mA 8 8
-
8(-)
22K
I GS5038-EX 2/2 HART HART 11 11 11(-)
Output2
If field switch closes or input loop current<1.2mA, output relay will - 6
P
Switch Switch Proximity
-
be de-energized, with yellow LED OFF. (Ⅱ) (Ⅰ) switch
5 SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com 6
Selection Guide Digital Input
GS5000-EX Range
2/2:GS5012-EX
1/2:GS5111-EX
Field instrument Application Module No. Channels Hazardous Side Signal Control Side Signal Features Page Digital input, relay output isolated barriers, transfer digital signals (dry
contact or NAMUR proximity switch) from hazardous area to safe area.
Digital GS5011-EX 1/1 Dry contact switch Relay contact output Independent powered 6
Each channel can be provided to select phase reversal and to enable line
Input
GS5012-EX 2/2 proximity switch input Configurable fault detection.The product needs an independent power supply and
GS5111-EX 1/2 galvanic isolation among power supply, input and output.
GS5013-EX 1/1 Transistor output 7
GS5019-EX 2/2
Specification
22K
Short-circuit Current:≈8mA 8 8
-
8(-)
22K
I GS5038-EX 2/2 HART HART 11 11 11(-)
Output2
If field switch closes or input loop current<1.2mA, output relay will - 6
P
Switch Switch Proximity
-
be de-energized, with yellow LED OFF. (Ⅱ) (Ⅰ) switch
5 SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com 6
Digital Input Digital Output(Loop Powered)
Digital input, transistor output isolated barriers, transfer digital signals(dry Digital output isolated barriers, control the 12V/45mA power supply to
contact or NAMUR proximity switch) from hazardous area to safe area. hazardous area. This product is suitable for driving IS devices such as
Each channel can be provided to select phase reversal and to enable the solenoid valves, LED and some other low-power loads located in the
line fault detection. The product needs an independent power supply and hazardous area. The input and output are each galvanically isolated, and
galvanic isolation among power supply, input and output. this product is loop powered.
Specification Specification
7 SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com 8
Digital Input Digital Output(Loop Powered)
Digital input, transistor output isolated barriers, transfer digital signals(dry Digital output isolated barriers, control the 12V/45mA power supply to
contact or NAMUR proximity switch) from hazardous area to safe area. hazardous area. This product is suitable for driving IS devices such as
Each channel can be provided to select phase reversal and to enable the solenoid valves, LED and some other low-power loads located in the
line fault detection. The product needs an independent power supply and hazardous area. The input and output are each galvanically isolated, and
galvanic isolation among power supply, input and output. this product is loop powered.
Specification Specification
7 SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com 8
Analog Input(Loop Powered) Analog Input
These products can work as AI isolated barriers to provide a separate Analog input isolated barriers, provide isolated power supplies for
power to the transmitter located in the hazardous area and transfer the transmitters which located in hazardous area. Transfer the 4~20mA signal
current from hazardous area to safe area. They can also work as AO isolated from hazardous area to safe area. It also allows bi-directional transmission
barriers to transfer current signal from the safe area to the hazardous area of HART communication signals. The product needs an independent
and drive devices like actuator in field. It allows bi-directional transmission power supply and galvanic isolation among power supply, input and
of HART communication signals. The input and output are each galvanically output.
isolated, and these products are loop powered.
UO Ue
Power1 HART Communication Load Resistance:RL≥250Ω 4(+)
Output1 4~20mA
5(-)
Voltage:0/1~5V, HART digital signal
HHC HHC + 10 + 10(+) -
RL s Input2 HHC
RL + 10(+) 4(+) 4 11 + RL
Load Resistance:RL≥330kΩ
10 + 11 11(S) 3(+)
I Output2 Output2 Input2 -
Input2 11(-) 5(-) Output2 4~20mA
P -
Output Accuracy:0.4%F.S. Note:Customers need specify current or voltage output when ordering.
11 - 5 12 12 HHC 12(-) 6(-)
Application1 Application2 - -
Application2 Application1
Application 2 (AO) : Hazardous-area Input:
Power2
Current 3-wire 2-wire
source transmitter transmitter
Safe-area Input: Current:0/4~20mA, HART digital signal
Current:4~20mA, HART digital signal Distribution: Note: a)GS5045-EX only contains input1, output1;
Note: a)GS5031-EX only contains CH1;
Hazardous-area Output: Open-circuit Voltage:≤28V b)GS5035-EX only contains input1, output1, output2;
b)GS5032-EX contains CH1 and CH2;
c)GS5036-EX contains input1, input2 and output1, output2;
Current:4~20mA, HART digital signal c)Can't use HHC (HART Hand Held Communicator) in hazardous area and safe area at Voltage at 20mA:≥15.5V
d)Can't use HHC (HART Hand Held Communicator) in hazardous area and safe area at
Load Resistance:RL≤ (Ui-6) /0.02 the same time; Normal working current:≤25mA the same time;
d)HHC (HART Hand Held Communicator) used in the hazardous area must get the
HART Communication Load Resistance RL≥250Ω Output Accuracy:0.1%F.S. (Typical:0.05%F.S.) e)HHC (HART Hand Held Communicator) used in the hazardous area must get the
explosion-proof certificate.
Temperature Drift:0.005%F.S./℃ explosion-proof certificate.
Explosion-proof Certificate
Drop voltage Ud≤6V
IO Response Time (0~90%) :≤2ms Explosion-proof Certificate
Current Power Supply Protection:Power supply reverse protection
RL UO Ui source Certificate Authority:NEPSI (China)
EMC:According to IEC 61326-1 (GB/T 18268) Certificate Authority:NEPSI (China)
Ex Marking:[Ex ib Gb]ⅡC [Ex ibD]
Dielectric Strength: Ex Marking:[Ex ia Ga]ⅡC [Ex iaD]
Maximum Voltage:Um=250V
Output Accuracy:0.2%F.S. Between non-intrinsically safe part and intrinsically safe part≥2500V AC Maximum Voltage:Um=250V
Intrinsic Safety Parameters:
Temperature Drift:0.01%F.S./℃ Between power supply part and output part≥500V AC Intrinsic Safety Parameters:
EMC:According to IEC 61326-1 (GB/T 18268) Terminals (7、8),(10、11) Insulation Resistance: Terminals (7、8、9),(10、11、12)
Ambient Temperature:-20℃~+60℃ UO=23.1V,IO=29mA,PO=670mW Between non-intrinsically safe part and intrinsically safe part≥100MΩ UO=28V,IO=93mA,PO=651mW
Dielectric Strength: ⅡC:CO=0.096μF, LO=0.5mH Between power supply part and output part≥100MΩ ⅡC:CO=0.083μF, LO=4.2mH
Between non-intrinsically safe part and intrinsically safe part≥2500V AC *ⅡB:C =0.288μF,
O
LO=1.5mH Weight:Approx. 150g
*ⅡB:CO=0.65μF, LO=12.6mH
Insulation Resistance: ⅡA:CO=0.528μF, LO=4.0mH Suitable Location:Mounting in safe area, and connected to the IS
ⅡA:CO=2.15μF, LO=33.6mH
Between non-intrinsically safe part and intrinsically safe part≥100MΩ
*ⅡBIntrinsic Safety Parameters are also suitable apparatus in hazardous area up to zone0 IIC and zone20 IIIC.
*ⅡB Intrinsic safety parameters are also suitable
Weight:Approx. 150g for dust explosion protection[Ex iaD] Suitable Field Apparatus:2-wire (HART) transmitter, 3-wire transmitter,
for dust explosion protection[Ex iaD]
Suitable Location:Mounting in safe area, and connected to the IS current source.
apparatus in hazardous area up to zone1 IIC and zone21 IIIC.
Suitable Field Apparatus:
2-wire (HART) transmitter (Application 1)
2-wire valve positioner, electrical converter (Application 2)
9 SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com 10
Analog Input(Loop Powered) Analog Input
These products can work as AI isolated barriers to provide a separate Analog input isolated barriers, provide isolated power supplies for
power to the transmitter located in the hazardous area and transfer the transmitters which located in hazardous area. Transfer the 4~20mA signal
current from hazardous area to safe area. They can also work as AO isolated from hazardous area to safe area. It also allows bi-directional transmission
barriers to transfer current signal from the safe area to the hazardous area of HART communication signals. The product needs an independent
and drive devices like actuator in field. It allows bi-directional transmission power supply and galvanic isolation among power supply, input and
of HART communication signals. The input and output are each galvanically output.
isolated, and these products are loop powered.
UO Ue
Power1 HART Communication Load Resistance:RL≥250Ω 4(+)
Output1 4~20mA
5(-)
Voltage:0/1~5V, HART digital signal
HHC HHC + 10 + 10(+) -
RL s Input2 HHC
RL + 10(+) 4(+) 4 11 + RL
Load Resistance:RL≥330kΩ
10 + 11 11(S) 3(+)
I Output2 Output2 Input2 -
Input2 11(-) 5(-) Output2 4~20mA
P -
Output Accuracy:0.4%F.S. Note:Customers need specify current or voltage output when ordering.
11 - 5 12 12 HHC 12(-) 6(-)
Application1 Application2 - -
Application2 Application1
Application 2 (AO) : Hazardous-area Input:
Power2
Current 3-wire 2-wire
source transmitter transmitter
Safe-area Input: Current:0/4~20mA, HART digital signal
Current:4~20mA, HART digital signal Distribution: Note: a)GS5045-EX only contains input1, output1;
Note: a)GS5031-EX only contains CH1;
Hazardous-area Output: Open-circuit Voltage:≤28V b)GS5035-EX only contains input1, output1, output2;
b)GS5032-EX contains CH1 and CH2;
c)GS5036-EX contains input1, input2 and output1, output2;
Current:4~20mA, HART digital signal c)Can't use HHC (HART Hand Held Communicator) in hazardous area and safe area at Voltage at 20mA:≥15.5V
d)Can't use HHC (HART Hand Held Communicator) in hazardous area and safe area at
Load Resistance:RL≤ (Ui-6) /0.02 the same time; Normal working current:≤25mA the same time;
d)HHC (HART Hand Held Communicator) used in the hazardous area must get the
HART Communication Load Resistance RL≥250Ω Output Accuracy:0.1%F.S. (Typical:0.05%F.S.) e)HHC (HART Hand Held Communicator) used in the hazardous area must get the
explosion-proof certificate.
Temperature Drift:0.005%F.S./℃ explosion-proof certificate.
Explosion-proof Certificate
Drop voltage Ud≤6V
IO Response Time (0~90%) :≤2ms Explosion-proof Certificate
Current Power Supply Protection:Power supply reverse protection
RL UO Ui source Certificate Authority:NEPSI (China)
EMC:According to IEC 61326-1 (GB/T 18268) Certificate Authority:NEPSI (China)
Ex Marking:[Ex ib Gb]ⅡC [Ex ibD]
Dielectric Strength: Ex Marking:[Ex ia Ga]ⅡC [Ex iaD]
Maximum Voltage:Um=250V
Output Accuracy:0.2%F.S. Between non-intrinsically safe part and intrinsically safe part≥2500V AC Maximum Voltage:Um=250V
Intrinsic Safety Parameters:
Temperature Drift:0.01%F.S./℃ Between power supply part and output part≥500V AC Intrinsic Safety Parameters:
EMC:According to IEC 61326-1 (GB/T 18268) Terminals (7、8),(10、11) Insulation Resistance: Terminals (7、8、9),(10、11、12)
Ambient Temperature:-20℃~+60℃ UO=23.1V,IO=29mA,PO=670mW Between non-intrinsically safe part and intrinsically safe part≥100MΩ UO=28V,IO=93mA,PO=651mW
Dielectric Strength: ⅡC:CO=0.096μF, LO=0.5mH Between power supply part and output part≥100MΩ ⅡC:CO=0.083μF, LO=4.2mH
Between non-intrinsically safe part and intrinsically safe part≥2500V AC *ⅡB:C =0.288μF,
O
LO=1.5mH Weight:Approx. 150g
*ⅡB:CO=0.65μF, LO=12.6mH
Insulation Resistance: ⅡA:CO=0.528μF, LO=4.0mH Suitable Location:Mounting in safe area, and connected to the IS
ⅡA:CO=2.15μF, LO=33.6mH
Between non-intrinsically safe part and intrinsically safe part≥100MΩ
*ⅡBIntrinsic Safety Parameters are also suitable apparatus in hazardous area up to zone0 IIC and zone20 IIIC.
*ⅡB Intrinsic safety parameters are also suitable
Weight:Approx. 150g for dust explosion protection[Ex iaD] Suitable Field Apparatus:2-wire (HART) transmitter, 3-wire transmitter,
for dust explosion protection[Ex iaD]
Suitable Location:Mounting in safe area, and connected to the IS current source.
apparatus in hazardous area up to zone1 IIC and zone21 IIIC.
Suitable Field Apparatus:
2-wire (HART) transmitter (Application 1)
2-wire valve positioner, electrical converter (Application 2)
9 SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com 10
Analog Output Temperature Converter
Analog output isolated barriers transfer the 4~20mA signal from safe area RTD input isolated barriers, convert RTD signals in hazardous area into
to hazardous area to drive field devices,such as valve positioners and current or voltage signals and output to safe area. It can be configured by
electrical converters. It also allows bi-directional transmission of HART computer. The product needs an independent power supply and galvanic
communication signals. The product needs an independent power supply isolation among power supply, input and output.
and galvanic isolation among power supply, input and output.
Specification Specification
*ⅡB Intrinsic safety parameters are also suitable Note:1 、The“%” of conversion accuracy is relative to its range. Take the larger
value between the relative error and the absolute error when applying.
for dust explosion protection[Ex iaD]
2 、Allow a maximum wire resistance of 50Ω/line for RTD input (3-wire).
11 SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com 12
Analog Output Temperature Converter
Analog output isolated barriers transfer the 4~20mA signal from safe area RTD input isolated barriers, convert RTD signals in hazardous area into
to hazardous area to drive field devices,such as valve positioners and current or voltage signals and output to safe area. It can be configured by
electrical converters. It also allows bi-directional transmission of HART computer. The product needs an independent power supply and galvanic
communication signals. The product needs an independent power supply isolation among power supply, input and output.
and galvanic isolation among power supply, input and output.
Specification Specification
*ⅡB Intrinsic safety parameters are also suitable Note:1 、The“%” of conversion accuracy is relative to its range. Take the larger
value between the relative error and the absolute error when applying.
for dust explosion protection[Ex iaD]
2 、Allow a maximum wire resistance of 50Ω/line for RTD input (3-wire).
11 SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com 12
Temperature Converter Temperature Converter
TC/mV input isolated barriers, convert TC/mV signals in hazardous area RTD input isolated barriers, convert RTD signals in hazardous area into
into current or voltage signals and output to safe area. It integrates CJC current or voltage signals and output to safe area. It can be configured by
function in terminal and can be configured by computer. The product computer. The product needs an independent power supply and galvanic
needs an independent power supply and galvanic isolation among isolation among power supply, input and output.
power supply, input and output.
Specification Specification
ⅡA:CO=1000μF, LO=28.8mH
Input Signal and Range Intrinsic Safety Parameters:
Type Range Min.Span Accuracy
*ⅡB Intrinsic safety parameters are also suitable
Type Range Min.Span Accuracy Terminals (7、8、9),(10、11、12)
TC T -200℃~+400℃ 50℃ 0.5℃ / 0.1% for dust explosion protection[Ex iaD]
RTD Pt100 -200℃~+850℃ 20℃ 0.2℃ / 0.1% UO=8.5V,IO=20mA,PO=43mW
E -200℃~+900℃ 50℃ 0.5℃ / 0.1%
J
Cu50 -50℃~+150℃ 20℃ 0.2℃ / 0.1% ⅡC:CO=6.5μF, LO=3.6mH
-200℃~+1200℃ 50℃ 0.5℃ / 0.1%
*
Cu100 -50℃~+150℃ 20℃ 0.2℃ / 0.1% ⅡB:CO=60μF, LO=10.8mH
K -200℃~+1372℃ 50℃ 0.5℃ / 0.1%
N -200℃~+1300℃ 50℃ 0.5℃ / 0.1% Note:1 、The“%” of conversion accuracy is relative to its range. Take the larger ⅡA:CO=1000μF, LO=28.8mH
value between the relative error and the absolute error when applying.
R -40℃~+1768℃ 500℃ 1.5℃ / 0.1%
2 、Allow a maximum wire resistance of 50Ω/line for RTD input (3-wire). *ⅡB Intrinsic safety parameters are also suitable
S -40℃~+1768℃ 500℃ 1.5℃ / 0.1% for dust explosion protection[Ex iaD]
B +320℃~+1820℃ 500℃ 1.5℃ / 0.1%
mV signal -100mV~+100mV 10mV 20uV / 0.1%
Note: 1 、The“%” of conversion accuracy is relative to its range. Take the larger
value between the relative error and the absolute error when applying.
2 、When the thermocouple is input, the conversion accuracy does not include
the CJC. For every 100Ω increase in the compensation wire, the cold junction error
increases by 0.2°C.
3、When the Type B thermocouple is input, the temperature range is required to
be greater than 680 °C to ensure the accuracy index.
4、mV signal input needs to be customized.
13 SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com 14
Temperature Converter Temperature Converter
TC/mV input isolated barriers, convert TC/mV signals in hazardous area RTD input isolated barriers, convert RTD signals in hazardous area into
into current or voltage signals and output to safe area. It integrates CJC current or voltage signals and output to safe area. It can be configured by
function in terminal and can be configured by computer. The product computer. The product needs an independent power supply and galvanic
needs an independent power supply and galvanic isolation among isolation among power supply, input and output.
power supply, input and output.
Specification Specification
ⅡA:CO=1000μF, LO=28.8mH
Input Signal and Range Intrinsic Safety Parameters:
Type Range Min.Span Accuracy
*ⅡB Intrinsic safety parameters are also suitable
Type Range Min.Span Accuracy Terminals (7、8、9),(10、11、12)
TC T -200℃~+400℃ 50℃ 0.5℃ / 0.1% for dust explosion protection[Ex iaD]
RTD Pt100 -200℃~+850℃ 20℃ 0.2℃ / 0.1% UO=8.5V,IO=20mA,PO=43mW
E -200℃~+900℃ 50℃ 0.5℃ / 0.1%
J
Cu50 -50℃~+150℃ 20℃ 0.2℃ / 0.1% ⅡC:CO=6.5μF, LO=3.6mH
-200℃~+1200℃ 50℃ 0.5℃ / 0.1%
*
Cu100 -50℃~+150℃ 20℃ 0.2℃ / 0.1% ⅡB:CO=60μF, LO=10.8mH
K -200℃~+1372℃ 50℃ 0.5℃ / 0.1%
N -200℃~+1300℃ 50℃ 0.5℃ / 0.1% Note:1 、The“%” of conversion accuracy is relative to its range. Take the larger ⅡA:CO=1000μF, LO=28.8mH
value between the relative error and the absolute error when applying.
R -40℃~+1768℃ 500℃ 1.5℃ / 0.1%
2 、Allow a maximum wire resistance of 50Ω/line for RTD input (3-wire). *ⅡB Intrinsic safety parameters are also suitable
S -40℃~+1768℃ 500℃ 1.5℃ / 0.1% for dust explosion protection[Ex iaD]
B +320℃~+1820℃ 500℃ 1.5℃ / 0.1%
mV signal -100mV~+100mV 10mV 20uV / 0.1%
Note: 1 、The“%” of conversion accuracy is relative to its range. Take the larger
value between the relative error and the absolute error when applying.
2 、When the thermocouple is input, the conversion accuracy does not include
the CJC. For every 100Ω increase in the compensation wire, the cold junction error
increases by 0.2°C.
3、When the Type B thermocouple is input, the temperature range is required to
be greater than 680 °C to ensure the accuracy index.
4、mV signal input needs to be customized.
13 SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com SHANGHAI CHENZHU INSTRUMENT CO.,LTD. Web:en.chenzhu-inst.com 14
Temperatue Converter
1/2:GS5076-EX.TC
2/2:GS5079-EX.TC
Specification
Supply Voltage:20~35V DC
Dimensions:114.5mm×99mm×17.5mm
Current Consumption (Supply voltage: 24V; output: 20mA) :≤55mA
Safe-area Output:
Output Current:0~20mA/4~20mA;Load Resistance:RL≤300Ω Connection
Output Voltage:0~5V/1~5V;Load Resistance:RL≥20kΩ
Hazardous-area Safe-area
Note:Customers need specify current or voltage output when ordering.
Hazardous-area Input:
Input signal:T、E、J、K、N、R、S、B (mV signal) GS5076-EX.TC
Input Signal Monitoring: GS5079-EX.TC
Compensation
Input Output Indicating resistance
7(+) DCS、PLC
Overrange 20.8mA LED H flashing 1(+)
24V DC
8(-) 2(-)
Underrange 3.8mA LED L flashing mV Input1
9(-) RL
Line breakage 20.8mA LED H and LED L flashing simultaneously Compensation 4(+)
+
resistance Output1 4~20mA
Temperature Drift:0.01%F.S./℃ 10(+) 5(-)
-
Response Time (0~90%) :≤1s 11(-) 3(+)
+ RL
*
K -200℃~+1372℃ 50℃ 0.5℃ / 0.1% ⅡB:CO=60μF, LO=10.8mH
N -200℃~+1300℃ 50℃ 0.5℃ / 0.1% ⅡA:CO=1000μF, LO=28.8mH
R -40℃~+1768℃ 500℃ 1.5℃ / 0.1%
S -40℃~+1768℃ 500℃ 1.5℃ / 0.1% *ⅡB Intrinsic safety parameters are also suitable
for dust explosion protection[Ex iaD]
B +320℃~+1820℃ 500℃ 1.5℃ / 0.1%
mV signal -100mV~+100mV 10mV 20uV / 0.1%
Note: 1 、The“%” of conversion accuracy is relative to its range. Take the larger
value between the relative error and the absolute error when applying.
2 、Allow a maximum wire resistance of 50Ω/line for RTD input(3-wire).
3、When the thermocouple is input, the conversion accuracy does not include
the CJC.
4、When the Type B thermocouple is input, the temperature range is required to
be greater than 680 °C to ensure the accuracy index.