Professional Documents
Culture Documents
Eaton 1CE30 Eaton B6743
Eaton 1CE30 Eaton B6743
1 Operation Features
The check section allows The valve and allow movement Cartridge is economical and
check section allows free flow depends on the pilot ratio of fits simple cavity. Allows quick,
into the actuator then holds the valve. For optimization of easy field service - reduces
3 and locks the load against load control and energy usage, down time. Interchangeable
movement. The pilot assisted a choice of pilot ratios is with pilot check valve of a
relief valve section will give available. similar size.
controlled movement when
The pressure required to open
2 pilot pressure is applied. The Pilot Ratio
the valve and start actuator
relief section is normally set
Sectional View movement can be calculated 2.5:1 Best suited for extremely
to open at a pressure at least
as follows: unstable applications such
1.3 times the maximum load
induced pressure but the Pilot Pressure = as long booms or flexible
pressure required to open the frameworks.
(Relief Setting) - (Load Pressure)
Pilot Ratio 5:1 (standard) Best suited for
applications where load varies
and machine structure can
induce instability.
10:1 Best suited for applications
where the load remains
relatively constant.
Performance Data
Pilot (3)
F Ratings and Specifications
Figures based on: Oil Temp = 40° C Viscosity = 32 cSt (150 SUS)
Valve (2)
Rated flow 30 L/min (8 USgpm)
Max relief pressure 350 bar (5000 psi)
Max load induced pressure 270 bar (4000 psi)
Cyl (1) Cartridge material Working parts hardened and ground steel. External surfaces zinc plated.
Standard housing material Aluminum (up to 210 bar). Add suffix “377” for steel option.
Description Mounting position Unrestricted
Overcenter valves give static Cavity A6610 (See Section M)
and dynamic control of loads by Torque cartridge into cavity 45 Nm (33 lbs ft)
regulating the flow into and out Weight 1CE30 0.15 kg (0.33 lbs)
of hydraulic actuators. When 1CE35 0.41 kg (0.90 lbs)
installed close to or within an 1CEE34 0.90 kg (1.98 lbs)
actuator, the overcenter valve Seal kits SK395 (Nitrile)
will stop runaway in the event SK395V (Viton®)
of hose burst and if open Filtration Cleanliness code 18/13 (25 micron nominal)
center directional control valves Temperature range -30°C to +90°C (-22° to +194°F)
are used, will allow thermal
Internal leakage 0.3 milliliters/min nominal (5 dpm)
expansion relief of the hydraulic
fluid. Nominal viscosity range 5 to 500 cSt
Pressure - bar
Pressure - psi
Pressure - psi
F-110.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 An Eaton Brand
1CE30 - Overcenter Valve
Pilot assisted relief with check
30L/min (8 USgpm) • 270 bar (4000 psi)
1 2 3 4 5 6
17.0 A/F
9.0 11.5
(0.35) (0.45)
3
88.0 107.0
26.5 (3.46) (4.21)
(1.04) 2
for max
42.0 fixed
60.0 (1.65)
47.0 28.0 (2.36) ‘N’ adjust
(1.85) (1.10)
1
42.5
(1.67) 26.5
(1.04)
111.0
Valve (2) V1 V2 (4.37)
63.5 57.0 max
(2.50) (2.24)
C1 C2
9.8
16.0 (0.39)
0.63) 82.0 (3.22)
101.6 (4.0)
Cyl (1) 31.8
(1.25) 2 holes Ø9.0 (0.35) thro’
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
An Eaton Brand EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 F-111.A
1CE Series - Overcenter Valve
Alternative body arrangements for 30 L/min valves
Code
Model 1C***** – F 3W – 35 S 5 230 / 50
1 2 3 4 5 6 7 8
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
160.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 An Eaton Brand
1CE Series - Overcenter Valve
Alternative body arrangements for 30 L/min valves
Dimensions
mm (inch)
26.0
(1.02) 26.3 8.0
(1.04) (0.32)
123.5
C2
(4.86) C2 V1
3
1 76.2 56.0 72.0
2
(3.00) (2.20) (2.83)
C1 V2
45.7
(1.80) C1
16.0 16.0
(0.63) (0.63)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
An Eaton Brand EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 161.A