Professional Documents
Culture Documents
E20-393 Exam Questions
E20-393 Exam Questions
om
Dell EMC E20-393 Exam Question & Answers
Implementation Engineer, Unity Solutions Specialist
.c
Exam
ps
m
du
am
ex
id
al
.v
w
w
// w
s:
tp
ht
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 2/110
Question: 1
om
A storage administrator has requested a recommendation on upgrading their VNX5600 to a
comparable Unity storage array. The solution requires a maximum capacity of 3.5 PB.
.c
To meet the administrator's requirement without over provisioning the capacity, which Unity Hybrid
ps
storage array is recommended?
m
A. Unity 300
du
B. Unity 400
C. Unity 500
am
D. Unity 600
Answer: D
ex
id
Explanation:
Unity 600 delivers 1.2 TB to 3.0 PB max raw capacity.
al
.v
Question: 2
w
w
What is the minimum VMware Hypervisor version a server must be running in order to support the
deployment of a UnityVSA system?
// w
A. 4.0
s:
B. 5.0
tp
C. 5.5
D. 6.0
ht
Answer: C
Explanation:
UnityVSA requirements include: VMWare ESXi 5.x, 6.x
References:
https://sweden.emc.com/products-solutions/trial-software-download/unity-vsa.htm
Question: 3
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 3/110
A. Asynchronous Replication
B. MCC Write Caching
C. Quick Start Pool Provisioning
D. Data at Rest Encryption
Answer: A
Explanation:
Asynchronous Unified Replication is available natively on UnityVSA. This allows file and block
resources to be replicated between UnityVSA systems, between UnityVSA and physical Unity
om
systems, and also locally back to the same UnityVSA system
Question: 4
.c
ps
A storage administrator is creating a host profile in Unisphere to provide host access to block storage
resources using the iSCSI protocol. The host initiators were not automatically discovered and must be
m
manually added.
du
In addition to the SAN host IQN, what other configuration can be performed through the "Create
iSCSI Initiator Wizard" window?
am
A. Enable and disable CHAP settings
ex
Answer: D
.v
w
Explanation:
w
A sample from a Broadcomm BIOS is provided in the figure below, illustrating the IQN assignment for
the VNX iSCSI target.
// w
s:
tp
ht
References:
https://www.emc.com/collateral/hardware/technical-documentation/h8229-vnx-vmware-tb.pdf
(page 34)
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 4/110
Question: 5
A storage administrator is configuring a storage pool on a Unity system containing Flash disks and
SAS disks. What tier will the system assign to each of the disk types?
Answer: A
om
Explanation:
.c
Hybrid pools can have up to 3 tiers (Extreme Performance, Performance, and Capacity).
For the Extreme Performance tier, use only SAS Flashdrives.
ps
For the Capacity tier, use only SAS drives.
m
Question: 6
C. Parent can be a snapshot copyCan copy an attached or detached snapshotInherits the parent
Snapshot Retention Policy
.v
D. Parent cannot be a snapshot copyCan copy an attached or detached snapshotInherits the parent
w
Answer: B
// w
Explanation:
s:
Note: You can create copies of LUNs by cloning LUNs from the Snapshot copies in a volume. These
tp
FlexClone LUNs are readable and writable copies of the LUNs as the LUN existed when the Snapshot
ht
copy was created. Before you can clone a LUN, you must create a Snapshot copy (the backing
Snapshot copy) of the LUN you want to clone.
References:
https://library.netapp.com/ecmdocs/ECMP1368845/html/GUID-E0660F7B-491B-4AA0-A1A8-
22B12DC6917D.html
Question: 7
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 5/110
C. Redirect on Write
D. Block Compression
Answer: C
Explanation:
The technology used for snapshots of both block and file resources in Unity is called redirect on
write.
Question: 8
om
DRAG DROP
What is the correct sequence of steps taken by the storage array when an AC power failure is
.c
detected?
ps
m
du
am
ex
id
al
.v
w
w
// w
s:
Answer:
tp
ht
Explanation:
The Battery Backup Unit (BBU) provides power to the Storage Processor in the event that cabinet
power is lost. The BBU is designed to power the SP long enough for the system to store SP cache
content to the M.2 SSD device before powering down. The BBU includes sensors which communicate
its charge and health status to the SP. In the event the BBU is discharged the SP will disable cache
until the BBU has recharged. In the event the BBU has faulted or cannot sustain enough charge, an
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 6/110
Question: 9
A system administrator is configuring asynchronous remote replication for an existing NAS server and
its' file systems on a Unity system. What should the administrator create to ensure all data is
replicated for the NAS server and the file system?
om
B. Replication sessions for each file system first and then the NAS server
C. A replication session on the NAS server and then manually create replication sessions on each file
system
.c
D. A replication session for only the NAS server
ps
Answer: D
m
du
Explanation:
Before File Systems or VMware NFS Datastores can be replicated, the NAS Server must be replicated.
am
Question: 10
ex
Which Unity feature provides a high bandwidth connection for large file transfers, enables proactive
id
Service Request generation and usage license reporting, and operates on a 24x7 basis?
al
C. Unisphere Central
w
Answer: D
//
s:
Explanation:
tp
Benefit from secure, high-speed, 24x7 predictive monitoring and remote repair for your EMC
ht
information infrastructure. EMC Secure Remote Services (ESRS) enables EMC Customer Service to
identify and proactively resolve potential issues before they can impact your business.
Question: 11
Which software bundles are provided with the Unity Starter software package?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 7/110
Answer: A
Explanation:
The UnityVSA offers a dynamic deployment model that allows you to start for free and grow as
business needs evolve.
UnityVSA include:
Question: 12
When configuring asynchronous remote replication, how many internal Unity Snapshots are
configured and utilized on the source system by a single replication session?
om
A. 1
.c
B. 2
C. 3
ps
D. 4
m
Answer: B
Explanation:
du
am
Internal Snapshot (Replication Snapshot) are Unity Snapshots created by the system which are part
of an asynchronous replication session. These Snapshots can be viewed in Unisphere, but user
ex
operations are not permitted. Each asynchronous replication session uses two internal snapshots
taken on the source and destination storage resources.
id
al
Question: 13
.v
A storage administrator is implementing FAST Cache on a Unity 500 storage array and can select from
w
a mix of SSD drives. Which drive types can be configured to meet the administrator’s requirements?
w
w
Answer: A
Explanation:
Unity 500 FAST Cache is only supported by 200 GB and 400 GB SSD hard drives.
Question: 14
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 8/110
A. Create a snapshot of the LUNConfigure LUN access for the secondary hostAttach the snapshot to
the secondary host
B. Create a snapshot of the LUNConfigure snapshot access to the LUN for the secondary hostAttach
the snapshot to the secondary host
C. Create a Synchronous Replication session for the LUNConfigure access to the replica LUN for the
secondary hostAttach the secondary host
D. Create an Asynchronous Replication on session for the LUNConfigure access to the replica LUN for
the secondary hostAttach the secondary host
Answer: B
om
Explanation:
Attaching a snapshot is only applicable for block snapshots, and makes the snapshot available for
.c
host IO. A host must have Snapshot access or LUN and Snapshot access configured in order to access
ps
the snapshot. When a snapshot is attached, Unisphere provides the option to create a copy of the
snapshot in case the administrator wants to preserve the current snapshot view for future use.
m
du
Question: 15 am
On which systems is Quality of Service available?
ex
Answer: C
w
w
Explanation:
UnitVSA features Host I/O limits, also known as Quality of service.
w
The EMC [Physical] Unity array comes with a pack of new hardware and software features focusing
//
References:
tp
https://www.presidio.com/blog/1554/technical-summary-emc-unification-with-unity
ht
Question: 16
When deploying virtual disks for a UnityVSA system, what is an EMC recommended Disk Provision
Policy?
Answer: A
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 9/110
Explanation:
EMC recommends the following settings for all virtual disks:
Question: 17
Which Dell EMC UnityXT system user interface allows system administrators to create scripts for
automating routine tasks?
A. Unisphere Central
B. UEMCLI
om
C. IPMI
D. Unisphere GUI
.c
Answer: B
ps
m
Question: 18
du
A system administrator has configured a system using the Initial Configuration wizard. After
am
completing the wizard, the administrator discovers that an incorrect IP address has been assigned to
the Unity system.
ex
Answer: D
w
Explanation:
//
management IP address when the Connection Utility (CU) is not available on the network. If an
tp
address is set, this command can also change the management IPv4 and IPv6 configuration mode. It
ht
attempts to configure the system with the given friendly name and/or network parameters.
Note: The Unisphere CLI (UEMCLI) is a tool that provides us with the CLI access to perform the same
actions as one would on the Unisphere web interface.
References:
https://www.emc.com/collateral/TechnicalDocument/docu69328.pdf
(page 60)
Question: 19
Which FAST Cache operation can be performed from the Settings window?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 10/110
Answer: A
Question: 20
Which Unity service task is used to reinstall the root operating system while leaving the user’s data
intact?
om
A. Restore the Management server
.c
B. Reimage the Storage Processor
C. Restore the Management software
ps
D. Reinitialize the storage system
m
Answer: B
Explanation:
du
am
Re-image a storage processor (SP) to safely fix problems with the system software that could not be
resolved by rebooting the SP. Re-imaging analyzes the system software for errors and attempts to
ex
References:
al
https://community.emc.com/docs/DOC-40315
.v
Question: 21
w
w
A. 25
//
B. 50
s:
C. 75
tp
D. 100
ht
Answer: C
Explanation:
The consistency group (CG) term is used for grouping several LUNs together in order to ensure write-
order consistency over several volumes. Each LUN can contain up to 2 TB, and the total supported
capacity can be up to 150 TB.
References:
https://en.wikipedia.org/wiki/RecoverPoint
Question: 22
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 11/110
Which migration tool can be used to move file data a Unity storage array in both NFS and CIFS/SMB
protocols?
Answer: D
om
Explanation:
EMcopy will work to copy the data from Solaris host to export CIFS and NFS including the security
configuration.
.c
ps
Question: 23
m
Which step must be completed prior to performing the initial configuration of a UnityVSA system and
du
creating the first storage pool?
am
A. Create an ESXi host profile
B. License the system for NFS and SMB support
ex
Answer: C
al
.v
Explanation:
w
1. Under the Storage Pool Section go to Pools. Select the + to start the “Create Pool Wizard”.
2. Name the Pool
w
3. Assign a Tier to each Virtual Disk attached to the VSA. You have Extreme, Performance and
//
Capacity.
s:
tp
ht
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 12/110
om
.c
ps
Etc.
References:
m
https://samshouseblog.com/2016/06/08/unity-vsa-storage-pool-creation/
Question: 24
du
am
What is the minimum and maximum recovery point objectives (RPO) configurable when using Unity
ex
Answer: A
w
Explanation:
//
Recovery Point Objective (RPO) is an industry accepted term that indicates the acceptable amount of
s:
data, measured in units of time, that may be lost in a failure. When you set up an asynchronous
tp
replication session, you can configure automatic synchronization based on the RPO. You can specify
an RPO from a minimum of 5 minutes up to a maximum of 1440 minutes (24 hours).
ht
References:
https://www.emc.com/dam/uwaem/documentation/unity-p-replication-config.pdf
(page 7)
Question: 25
A system administrator has added a new Unity storage array to their environment. The administrator
wants to migrate block data from vVNX running in their VMware environment to a UnityVS
A. In addition, the administrator needs to migrate the block data from an older CLARiiON storage
array to the new Unity storage array.
Which single block migration option will work for both the virtual and hardware storage devices?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 13/110
Answer: A
Explanation:
You move Block storage from a CLARiiON CX or VNX Series storage system to an EMC
Unity system.
Note: Clariion (styled CLARiiON) is a discontinued [1] SAN disk array manufactured and sold by EMC
om
Corporation, it occupied the entry-level and mid-range of EMC's SAN disk array products. In 2011,
EMC introduced the EMC VNX Series, designed to replace both the Clariion and Celerra products.
.c
Question: 26
ps
How is encryption set for a Unity storage system?
m
du
A. Clicking the “Mode” checkbox on the Manage Encryption page
B. Selecting “Status” on the Manage Encryption page
am
C. Automatically set at the factory
D. First time the license is applied
ex
Answer: D
id
al
Explanation:
D@RE is included by default on Unity arrays and included in the Unity license file unless otherwise
.v
requested during ordering. Therefore, all that is needed to activate D@RE is to install the D@RE
w
enabled license file. The license installation process is not specific to D@RE, and is required to be
w
performed before using the array. When logging into Unisphere for the first time, license installation
appears as a step of the Unisphere Configuration Wizard, prompting the administrator to install the
w
license file obtained from EMC. If this license file includes D@RE functionality, D@RE will be enabled
//
Note: Unity storage systems address sensitive data concerns through controller-based Data at Rest
tp
designed to be largely invisible to administrative end users, requires almost no effort to enable or
manage. Enabling the feature or backing up the encryption keys externally takes just seconds, and
redundant keystore backups stored on array ensure that user data is always as available as it is
secure.
Question: 27
A system administrator experienced a power failure in their environment. To which device will cache
de-stage?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 14/110
Answer: A
Question: 28
A service provider is installing a Unity storage system for an end-user. The end-user is concerned
about network security and will not allow the service provider access to the network.
om
How can the service provider set a static IP address for the Unity storage system management
interface?
.c
A. Use the embedded InitCLI tool
ps
B. Connect directly to the service ports and configure the networking through UEMCLI
C. Use an IPMI serial over LAN connection
m
D. Use the Connection Utility to create a configuration file
du Answer: B
am
Explanation:
ex
address is set, this command can also change the management IPv4 and IPv6 configuration mode. It
al
attempts to configure the system with the given friendly name and/or network parameters.
Note: The Unisphere CLI (UEMCLI) is a tool that provides us with the CLI access to perform the same
.v
References:
w
https://www.emc.com/collateral/TechnicalDocument/docu69328.pdf
(page 60)
// w
Question: 29
s:
tp
Which task must be performed on the storage system in order to access a file system read/write
ht
snapshot?
Answer: B
Explanation:
Read-write snapshots can be made available to hosts as separate shares.
The Shared property is applicable to file snapshots only, and indicates whether the snapshot is
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 15/110
Question: 30
Which severity level alerts for a fault condition that has occurred, has minor impact on the system,
om
and does not need to be fixed immediately?
A. Critical
.c
B. Notice
ps
C. Error
D. Warning
m
du
am Answer: D
Explanation:
Event Severity levels are: critical, error, warning, info.
ex
Question: 31
id
al
A storage administrator wants to configure a Unity system to log system events to a remote log
server. In order to allow access to the log server, which port should the administrator ensure is not
.v
A. 514
B. 714
w
C. 1000
//
D. 5179
s:
tp
Answer: A
ht
Explanation:
The storage system supports logging user/audit messages to a remote host. By default, the storage
system transfers log information on port 514 using UDP.
References:
https://www.emc.com/collateral/TechnicalDocument/docu69321.pdf
(Page 31)
Question: 32
A Unity system LUN has a daily snapshot schedule with a Retention Policy of seven days. A hardware
failure results in a double fault of the LUN.
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 16/110
Answer: D
Explanation:
The oldest snapshots residing on that pool with retention policy set to pool automatic deletion begin
om
being deleted.
Question: 33
.c
ps
What describes multiple LUN snapshots?
m
A. Captures multiple point-in-time data states.Snapshot data state is marked “unmodified” from its
du
source when attached.Snapshot tree supports multiple simultaneous attaches.
B. Captures multiple point-in-time data states.Snapshot data state is marked “unmodified” from its
am
source when attached.Snapshot tree supports only one attach at a time.
C. Captures multiple point-in-time data states.Snapshot data state is marked “modified” from its
ex
Answer: D
.v
w
Explanation:
w
Only a single snapshot per LUN can be attached at any given time, and must be detached prior to
attaching another snapshot of the same LUN.
// w
s:
tp
ht
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 17/110
om
.c
ps
m
du
Question: 34
am
What is the maximum number of LUN snapshots that are supported by Unity?
ex
A. 16
B. 96
id
C. 256
al
D. 512
.v
Answer: C
w
w
Explanation:
w
Note: Logical Unit Number (LUN) – A block-level storage device that can be accessed using a protocol
//
such as iSCSI.
s:
Question: 35
tp
ht
At which stage in the Unity power up sequence would the Storage Processor enter Service mode
upon detecting an error?
Answer: C
Explanation:
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 18/110
Note: Boot counters are a troubleshooting mechanism that is designed into the Unity architecture to
help pinpoint the specific cause of software or hardware events during the boot sequence. If the
Unity system detects a problem with software or hardware components, its corresponding Boot
Counter is incremented. If a counter reaches a predefined threshold, the SP boots into Service Mode
during its next boot cycle.
References:
https://www.emc.com/collateral/TechnicalDocument/docu69328.pdf
(page 12)
Question: 36
om
An administrator’s Unity system is configured with both a Fibre Channel CNA and a Fibre Channel I/O
module. Which Fibre Channel port on each SP must be used for native synchronous replication?
.c
A. CNA FC port 5
ps
B. I/O module FC port 2
C. CNA FC port 4
m
D. I/O module FC port 5
du Answer: C
am
Explanation:
ex
Only one FC port can be configured and used for synchronous replication. Once an FC port is
assigned, it will continue to act as the synchronous replication port and can never be changed. To
id
determine the FC port used for synchronous replication, in the CLI console, run the command
/remote/sys show -detail. Port information, similar to the following example, will appear in the
al
output:
.v
References:
https://www.dellemc.com/en-us/documentation/unity-family/unity-p-replication-config/03-unity-
w
rep-br-considerations-syncrep.htm
// w
Question: 37
s:
tp
Which feature provides the ability to provision block and file storage for Microsoft Windows or
Microsoft SharePoint sites?
ht
Answer: A
Question: 38
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 19/110
Which information must be retrieved and used to select the unconfigured UnityVSA system when
running the Auto-discover option of the Connection Utility?
A. Array Name
B. System’s Serial ID
C. DNS Host Name
D. System’s UUID
Answer: B
Explanation:
om
Note: The Connection Utility can be use the Auto Discover option to discover the system and
configure the system name, IPv4 management settings, and/or IPv6 management settings.
References:
.c
https://www.emc.com/collateral/TechnicalDocument/docu69316.pdf
ps
Question: 39
m
du
What is an advantage for selecting Centralized ESRS over Integrated ESRS?
am
A. External virtual machine is not required
B. WAN compression is not required to Unity systems
ex
Answer: D
al
.v
Explanation:
w
The following requirements are related to the Integrated ESRS implementation only:
w
References:
https://www.emc.com/collateral/TechnicalDocument/docu69327.pdf
w
(page 12)
//
s:
Question: 40
tp
ht
In UnityVSA, what is the maximum storage capacity offered by the VVOLs license?
A. 4TB
B. 10TB
C. 25TB
D. 50TB
Answer: D
Explanation:
UnityVSA maximum Usable Capacity is4 TB (Community Edition); 10 TB; 25 TB; and 50 TB licenses
available.
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 20/110
References:
https://shop.dellemc.com/sv-se/Product-Family/Unity-Products/Dell-EMC-Unity-VSA/p/EMC-Unity-
Virtual-Storage-Appliance
Question: 41
A system administrator receives a warning that their DPE I/O Module has a fault. In this situation,
which type of replacement is required?
A. Hot-pluggable CRU
B. Non-Hot-pluggable FRU
om
C. Hot-pluggable FRU
D. Non-Hot-pluggable CRU
.c
Answer: C
ps
Explanation:
m
Your storage system is designed to be powered on continuously. Most components are hot
du
swappable; that is, you can replace or install these components while the storage system is running.
am
Question: 42
ex
Which UnityVSA storage resource can be configured with Host I/O limits?
id
A. NAS Server
al
B. Pool
C. File System
.v
D. LUN
w
w
Answer: D
w
Explanation:
//
Host I/O limits is a feature which allows the user to control the amount of throughput and bandwidth
s:
Question: 43
Which option can be enabled in the Advanced tab of the SMB Share Properties window?
A. Shared VHDX
B. Controller-Based Encryption
C. SMB Direct
D. Protocol Encryption
Answer: D
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 21/110
Explanation:
om
.c
ps
m
du
am
ex
id
Question: 44
al
Which UnityVSA configuration can be performed using the Unisphere Initial Configuration wizard?
.v
w
Answer: D
tp
ht
Explanation:
The Unisphere Initial Configuration wizard walks through a complete configuration of the UnityVSA,
including changing passwords, licensing, network setup (DNS, NTP), creating pools, e-mail server,
support credentials, your customer information, ESRS, iSCSI and NAS interfaces.
References:
http://blog.mdschneider.me/unityvsa-part-3/
Question: 45
A system administrator wants to configure asynchronous replication on their Unity system. What is
required before creating a replication session?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 22/110
A. A Fibre Channel connection configured between the remote systems.A configured replication
connection between the remote systems.
B. A Sync Replication Management Port configured on each system.A Fibre Channel connection
configured between the remote systems.A configured replication connection between the remote
systems.
C. An IP-based replication interface on the same network as the destination system’s replication
interface.A configured replication connection between the remote systems.
D. A Sync Replication Management Port configured on each system.An IP-based replication interface
on the same network as the destination system’s interface.A configured replication connection
between the remote systems.
om
Answer: D
.c
Explanation:
ps
Asynchronous remote replication requires a replication interface be created on each SP on the
system.
m
For asynchronous replication, replication is performed over Ethernet interfaces configured on the
du
system. On EMC Unity physical systems, the onboard 10GbE BaseT ports, CNA ports with Ethernet
personality, or Ethernet ports located on I/O modules can be used for replication. In UnityVSA
am
systems, any I/O port can be used for asynchronous replication.
Question: 46
ex
id
How long before a license expires will UnityVSA send the first alert warning?
al
A. 3 days
.v
B. 7 days
w
C. 15 days
D. 1 month
w
w
Answer: D
//
s:
Explanation:
tp
As a reminder, UnityVSA displays several alerts in Unisphere prior to the license expiration date. The
table below shows when alerts are generated leading up to the expiration date.
ht
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 23/110
om
.c
Question: 47
ps
What is the minimum memory requirement for a host running VMware ESXi 6.0 to support the
m
deployment of a UnityVSA system?
A. 8 GB
du
am
B. 12 GB
C. 16 GB
ex
D. 18 GB
id
Answer: B
al
Explanation:
.v
References:
w
https://www.emc.com/collateral/TechnicalDocument/docu69316.pdf
(page 2)
// w
Question: 48
s:
tp
A storage administrator wants to create a series of daily snapshots for an existing critical LUN. How
can the snapshots be created?
ht
A. Snapshot schedules can only be configured within the LUN Creation wizard
B. From the Pool Properties page, configure the Snapshot schedule
C. Only manually taken snapshots are supported on existing LUNs
D. From the LUN Properties page, configure the Snapshot schedule
Answer: B
Explanation:
In addition to being created ahead of time on the Snapshot Schedules page, new snapshots
schedules may also be created during the process of creating a new storage resource from within the
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 24/110
om
Question: 49
.c
ps
Which operation can be performed from the FAST VP settings section in the Unisphere Settings
m
window?
du
A. Enable scheduled data relocation at the pool level
B. Exclude pool from the data relocation schedule
am
C. Enable scheduled data relocation at the system level
D. View the data relocation progress between tiers
ex
Answer: A
id
al
Explanation:
.v
FAST VP accelerates performance of a specific storage pool by automatically moving data within that
pool to the appropriate drive technology, based on data access patterns. FAST VP is only applicable to
w
hybrid pools.
w
FAST VP is most effective if data relocations occur during or immediately after normal daily
w
processing. EMC recommends scheduling FAST VP relocations to occur before backups or nightly
batch processing.
//
s:
Question: 50
tp
ht
Through which protocols are backend storage provisioned to the ESXi host when deploying a
UnityVSA system?
Answer: A
Explanation:
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 25/110
Question: 51
Where do the D@RE encryption/decryption functions occur in the Unity storage system?
om
C. SAS I/O Module
D. Self-encrypting drives
.c
Answer: C
ps
Explanation:
m
Upon installation and activation of the feature, the following keys are generated by
du
RSA BSAFE and persisted to the Lockbox:
A new KEK is generated each time the array boots. The KEK is wrapped with the KWK and passed to
am
the SAS controller during the system boot process. Using the persisted KWK, the SAS controller can
decrypt the KEK.
ex
Question: 52
id
al
.v
w
Based on the exhibit, which port can provide either Fibre Channel or Ethernet connectivity for host
w
access?
// w
A. A
s:
B. B
tp
C. C
D. D
ht
Answer: D
Explanation:
Example:
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 26/110
om
.c
ps
m
du
am
References:
https://www.slideshare.net/USSCru/emc-unity-vnxvnx2-emc
ex
Question: 53
id
al
A system administrator is browsing their local management station for a Unity license file. Which file
.v
A. .lic
w
B. .rsa
w
C. .lin
//
D. .cer
s:
Answer: A
tp
ht
Explanation:
You need to obtain the license file (.lic) from the EMC license management web site.
References:
https://www.emc.com/techpubs/vipr/license_vipr-1.htm
Question: 54
A storage administrator wants to add as asynchronous replication session to a pair of Unity systems
with an existing synchronous replication session that is operating correctly. Which configuration
steps are needed?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 27/110
Answer: A
om
Explanation:
To fully configure asynchronous replication between systems, you must do each of following:
Note: To fully configure synchronous replication, you must complete each of following:
.c
ps
Question: 55
m
Which Unity feature benefits oracle OLTP environments by improving storage utilization?
A. 4 block formatting
du
am
B. Increased SP Cache size
C. Automatic storage tiering
ex
D. VVOLS
id
Answer: C
al
Explanation:
.v
UnityVSA supports the Fully Automated Storage Tiering for Virtual Pool (FAST VP) feature for both
w
FAST VP optimizes storage utilization by automatically moving data between and within the storage
tiers.
w
References:
//
https://www.emc.com/collateral/TechnicalDocument/docu69316.pdf
s:
(page 11)
tp
Question: 56
ht
A system administrator has installed the Unity Connection Utility on a Microsoft Windows host. The
Windows host is connected to the same physical subnet as a newly installed Unity storage system.
When the utility is run, it does not discover any Unity storage systems.
What should be checked on the host that may be preventing the utility from discovering any Unity
storage systems?
A. Java SE version
B. Ethernet adapter flow control
C. Network Access Filter Driver
D. Host firewall services
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 28/110
Answer: A
Explanation:
Unity Connection is dependent on Java for some of the components to work.
Question: 57
A Unity 400 system has Data at Rest Encryption licensed and enabled. Which operation(s) must be
performed from the Unisphere Settings window to ensure the system is still operational after SP
replacements?
om
A. Download Audit Log
.c
B. Download Checksum
C. Backup Keystore File
ps
D. Download Audit Log and Checksum
m
Answer: C
Explanation:
du
am
The keystore is tied to the storage processors, so care must be taken when performing service
operations in order to preserve the encryption keys. In the event that the chassis and both storage
ex
processors need to be replaced, both storage processors should not be replaced at the same time.
Instead, the chassis replacement should be followed while retaining one SP until the array is back
id
online before replacing the second SP. In the case that storage processors have already been replaced
al
at the same time and the keystore was lost, the keystore may be restored from an external backup.
.v
Question: 58
w
w
When a storage resource has a snapshot taken of it, where are writes to the storage resource
w
written?
//
Answer: A
Question: 59
When the LUN Snapshot Attach to Host operation is performed, what does the Unity system
optionally do before beginning the attach process?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 29/110
Answer: B
Question: 60
om
A. LDAP
B. NIS
.c
C. NDS
D. Active Directory
ps
Answer: A
m
Question: 61 du
am
A Unity storage system is installed with 10 Gb optical SFPs in CNA ports 4 and 5 of both Storage
ex
Processors. The storage administrator has had a request from a user to connect to the storage system
id
Fibre Channel
w
C. Configure CNA port 4 and 5 of SPA as 10 Gb opticalConfigure CNA ports 4 and 5 of SPB as 16 Gb
w
Fibre Channel
D. CNA ports cannot be reconfigured once they are committed
//
s:
Answer: D
tp
ht
Explanation:
Once you set the network protocol on the CNA ports you cannot switch to a different network
protocol.
References:
https://www.emc.com/collateral/TechnicalDocument/docu60144.pdf
(page 5)
Question: 62
In UnityVSA, which license(s) is able to extend the storage capacity from 25 TB to 50 TB with an
upgrade path license?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 30/110
A. Professional only
B. Professional and VVOLS
C. VVOLS only
D. Community
Answer: A
Explanation:
Professional Edition is a licensed subscription-based offering available at capacity levels of 10 TB, 25
TB, and 50 TB.
om
Question: 63
.c
When defining which resources on the destination system the replicated item will use for an
ps
asynchronous session, which settings must be provided?
m
A. Replication Mode, RPO, and Replicate To
du
B. Name, Pool, and Storage Provisioning
C. Ethernet Port, Subnet/Prefix Length, and Gateway
am
D. Management IP Address, User Name, and Password
ex
Answer: B
id
Explanation:
al
the name, pool, storage provisioning, and tiering policy you want to use for the destination storage
w
resource. The system will automatically created a destination storage resource as part of this process.
w
References:
https://www.emc.com/dam/uwaem/documentation/unity-p-replication-config.pdf
w
(page 23)
//
s:
Question: 64
tp
ht
Answer: B
Explanation:
References:
https://www.emc.com/collateral/software/data-sheet/h1948-secure-remote-supp-gateway-ds.pdf
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 31/110
Question: 65
om
Answer: A
.c
ps
Question: 66
m
In order to replace a faulty component, a service provider has placed one of the Unity Storage
du
Processors into Service mode. Once the component is replaced, how is the Storage Processor
brought back into Normal mode?
am
A. Exit the Service Mode task
ex
Answer: B
.v
w
Explanation:
w
If a single Storage Processor (SP) comes up in Service Mode, in Unisphere, you need to reboot the SP
w
https://www.emc.com/collateral/TechnicalDocument/docu69355.pdf
s:
(page 4)
tp
ht
Question: 67
A user is having difficulty troubleshooting a Unity storage system and the service provider has been
contacted for assistance. The service provider needs to run some service commands on the Storage
Processors to troubleshoot the issue further.
Which step must be taken to allow the service provider remote access to the storage system?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 32/110
Answer: D
Explanation:
The Service Tasks tab provides tools to service the storage system, including repair and
troubleshooting. You can use this page to collect system and configuration information for assisting
your service provider with a service request. The service password is required to access the various
service task operations.
The Technical Advisories tab displays up-to-date information about advisories specific to the system
by referencing knowledge base articles. The Logs tab displays an audit log for system events. It also
allows users to configure a remote host to which to send log information and lets users export logs
into a CSV file for additional reporting purposes.
om
Question: 68
.c
How long will a Copy Back operation take when a hot spare is invoked?
ps
A. Pro-Active hot spare does not use a Copy Back operation
m
B. Copy Back time depends on the RAID type
du
C. Copy Back time depends on the disk capacity
D. Copy Back time depends on the disk type
am
Answer: B
ex
Explanation:
id
Note: Starting with Release 24, you can now use a proactive hot spare for proactive disk
al
replacement. Before Release 24 you had to remove the physical disk to replace in order to force a
rebuild. During the rebuild phase, the RAID group was "degraded" and at risk.
.v
Resolution:
w
References:
https://community.emc.com/docs/DOC-9419
// w
Question: 69
s:
tp
A storage administrator wants to configure a Unity system to join the list of arrays remotely
ht
monitored for activity and system status using Unisphere Central. The security policy on the
Unisphere server was set to “automatic”.
What additional security information must be specified in the Unisphere Settings window to enable
communication with Unisphere Central?
Answer: D
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 33/110
Explanation:
Configure the security policy to specify how storage systems are verified when connecting to
Unisphere Central. Automatic verification automatically verifies storage systems when they connect
to Unisphere Central using a preconfigured security certificate hash and passphrase.
References:
https://www.emc.com/collateral/white-papers/h13827-unisphere-central-v4-wp.pdf
(page 21)
Question: 70
A storage administrator has purchased a UnityVSA and asks your recommendation on how to
om
provision the storage to their ESXi host. Based on Dell EMC best practices, what should you
recommend?
.c
A. Thick Provisioned
ps
B. Thick Provision Eager Zeroed
C. Thin Provisioned
m
D. Thin Provisioned Eager Zeroed
du Answer: B
am
Explanation:
ex
References:
https://www.emc.com/collateral/white-papers/h15093-dell-emc-unity-best-practices-guide.pdf
id
(p.11)
al
Question: 71
.v
w
According to Dell EMC best practices, how should off-site data be asynchronously replicated for a DR
w
solution?
w
A. Include a Flash tier in a hybrid pool where asynchronous replication will be active on the source
//
only.
s:
B. Include a Flash tier in a hybrid pool where asynchronous replication will be active on both the
tp
replicated
D. Configure the sync replication ports on the CAN for 16Gb Fibre Channel on both the source and
destination.
Answer: D
Explanation:
References:
https://www.emc.com/collateral/white-papers/h15088-dell-emc-unity-replication-technologies.pdf
Question: 72
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 34/110
Answer: A
Explanation:
om
References:
https://www.emc.com/collateral/white-papers/h15163-dell-emc-unity-migration-technologies.pdf
(p.8)
.c
ps
Question: 73
m
A company has a Unity 300 system with 200 SAS drives. They need to increase the number of SAS
du
drives by 300. Which in-place upgrade is required?
am
A. Unity 400F
B. Unity 400
ex
C. Unity 600F
D. Unity 500
id
Answer: D
al
.v
Explanation:
w
References:
w
https://www.emc.com/collateral/data-sheet/h14958-unity-hybrid-family-
ss.pdf?isKoreaPage=false&domainUrlForCanonical=https%3A%2F%2Fwww.emc.com
// w
Question: 74
s:
tp
Answer: D
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 35/110
Explanation:
The Snapshot Copy operation will make a copy of an existing snapshot that is either attached or
detached from a host. The copy will capture the existing data state of the snapshot it copies. In this
Copy example, a copy of an existing 4 o clock snapshot is being made. The copy inherits the parent
snapshot data state of 4 o clock and its retention policy
Question: 75
om
B. Management IP is assigned
C. LUN is created
D. File system is created
.c
ps
Answer: A
m
Explanation:
du
References:
https://www.emc.com/collateral/white-papers/h15090-dell-emc-unity-data-at-rest-encryption.pdf
am
(p.7)
ex
Question: 76
id
What is the sequence of steps that must be executed to implement IP Multi-tenancy in a Unity
al
system?
.v
A. Create file systems and shares for each tenantConfigure host access for the tenant’s sharesAdd
w
B. Associate tenants with existing NAS serversCreate file systems and shares for each
tenantConfigure host access for the tenant’s shares
w
C. Create a NAS server for each tenantCreate file systems and shares for each tenantAdd tenants and
//
D. Add tenants to the Unity systemCreate a NAS server for each tenantCreate file systems and shares
tp
Answer: D
Explanation:
References:
https://www.dellemc.com/en-za/documentation/unity-family/unity-p-configure-smb-file-
sharing/08-unity-smb-c-ch-configuring-ip-multitenancy.htm
Question: 77
If each Storage Processor in a Unity storage array has two on-board CNA ports with a dual personality
controller, which protocols are supported by these CNA ports?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 36/110
Answer: B
Explanation:
References:
https://www.emc.com/collateral/TechnicalDocument/docu69319.pdf
om
Question: 78
.c
A storage administrator is considering adding another application to run on their Unity 300 but they
ps
are concerned about the application’s performance. They ask what is considered “normal” for CPU
utilization. Based on Dell EMC best practices, what should be your response?
m
du
A. Below 50%
B. 50% - 70%
am
C. 70% - 90%
D. 90% - 95%
ex
Answer: B
id
al
Explanation:
References:
.v
https://www.emc.com/collateral/white-papers/h15093-dell-emc-unity-best-practices-guide.pdf
w
(p.9)
w
Question: 79
// w
Based on Dell EMC based practices, under what conditions would you consider creating multiple
s:
Answer: C
Explanation:
References:
https://www.emc.com/collateral/TechnicalDocument/docu69895.pdf
(p.13)
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 37/110
Question: 80
When a copy of a file system snapshot is created, what are the characteristics of the copy?
Answer: C
om
.c
Question: 81
ps
Which operation can be performed on the General tab of the LUN Properties page?
m
A. Extend the LUN
du
B. Grant Host access
C. Replicate the LUN
am
D. Set Host I/O limits
ex
Answer: A
id
al
Question: 82
.v
w
Which Unity system configuration can be performed using the Unisphere Initial Configuration
wizard?
w
w
Answer: C
Explanation:
References:
https://www.emc.com/collateral/white-papers/h15085-dell-emc-unity-unisphere-overview.pdf
Question: 83
Which system level alert indicates an error has occurred that has no impact on the system and
should be remedied in the near future?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 38/110
A. Error
B. Warning
C. Informational
D. Notice
Answer: A
Explanation:
References:
https://www.emc.com/collateral/white-papers/h15085-dell-emc-unity-unisphere-overview.pdf (23)
om
Question: 84
.c
What is the maximum number of file system snapshots that are supported by Unity?
ps
A. 16
B. 96
m
C. 256
du
D. 512
am
Answer: C
ex
Question: 85
id
al
Answer: D
tp
ht
Question: 86
A system administrator plans to shut down a Unity storage system for routine maintenance. What
should be done to prevent data loss before shutting down the storage system?
Answer: C
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 39/110
Explanation:
References:
https://www.emc.com/collateral/TechnicalDocument/docu69355.pdf
(3)
Question: 87
A storage administrator wants to asynchronously replicate a compressed LUN from the primary site
to a Unity at the secondary site. Which statement describes this operation?
om
A. Replication of compresses data is controlled by the bandwidth throttle setting.
B. By default, replication compresses data sent to the destination.
C. The source data is uncompressed, then replicated to the destination.
.c
D. The source data is replicated to the destination, then uncompressed.
ps
Answer: D
m
Question: 88 du
am
What is the maximum recovery point objectives (RPOs) configurable when using Unity native
ex
asynchronous replication?
id
Answer: D
w
Explanation:
//
References:
s:
https://www.dellemc.com/en-ie/documentation/unity-family/unity-p-replication-config/02-unity-
tp
rep-br-workflow.htm
ht
Question: 89
Answer: C
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 40/110
Question: 90
A. First select the LUN, then select the Pool to move the LUN into, and finally choose the Move
operation.
B. First select the Pool to move the LUN into, then choose the Move operation, and finally select a
LUN.
C. First choose the Move operation, then select a LUN, and finally select the Pool to move the LUN
om
into.
D. First select a LUN, then choose the Move operation, and finally select the Pool to move the LUN
into
.c
ps
Answer: D
m
Explanation:
du
References:
https://www.dellemc.com/sr-me/documentation/unity-family/unity-p-config-luns/02-configuring-
am
lun-move.htm
ex
Question: 91
id
B. vCenter Server
w
C. IP Multi-tenancy
w
D. Auto formatting
w
Answer: C
//
s:
tp
Question: 92
ht
An administrator is preparing to configure logging to a remote host. If they use the Unity default
values, which port needs to be open for the system to transfer the log information?
A. 443
B. 514
C. 546
D. 8443
Answer: A
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 41/110
Explanation:
References:
https://www.emc.com/collateral/TechnicalDocument/docu69327.pdf
Question: 93
What functionality is provided by the Unity UFS64 Enterprise File System architecture?
om
D. Space reclamation of unused blocks.
Answer: D
.c
ps
Explanation:
References:
m
http://www.emc-announces.com/collateral/white-papers/h13770-emc-vnxe3200-ufs64-wp.pdf
Question: 94 du
am
On which platform(s) is FAST Cache available?
ex
Answer: C
w
w
Explanation:
References:
//
https://www.emc.com/collateral/white-papers/h15084-dell-emc-unity-introduction-to-the-
s:
platform.pdf
tp
ht
Question: 95
A system administrator wants to grant privileges to manage storage resources and host
configurations for some users. However, the administrator wants to ensure users have no privileges
to manage user accounts, change network settings and NAS servers, or perform software upgrades.
Which user role should be associated with the user accounts to be created?
A. Administrator
B. Operator
C. Storage Administrator
D. Service
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 42/110
Answer: D
Question: 96
A Unity customer has a 20 TB pool consisting of SAS and NL-SAS drives. Based on Dell EMC best
practices, what is the minimum recommended amount of Flash capacity they should use for a Flash
tier?
A. 1 TB
B. 2 TB
om
C. 4 TB
D. 10 TB
.c
Answer: A
ps
m
Explanation:
References:
du
https://www.emc.com/collateral/white-papers/h15093-dell-emc-unity-best-practices-guide.pdf
am
Question: 97
ex
What can be used by advanced users to create scripts for automating routine Unity tasks?
id
A. Unisphere GUI
al
C. CloudIQ
D. UEMCLI commands
w
w
Answer: B
// w
Explanation:
s:
References:
https://www.dellemc.com/en-us/documentation/unity-family/unity-p-cli-user-guide/01-unity-cli-br-
tp
introduction.htm
ht
Question: 98
You have recently deployed a UnityVSA system. In addition to the three virtual disks on which the
system is deployed, what is the minimum number of virtual disks required to create a storage pool
on the system?
A. 1
B. 2
C. 4
D. 5
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 43/110
Answer: A
Explanation:
References:
https://www.emc.com/collateral/TechnicalDocument/docu69316.pdf
(p.11)
Question: 99
om
A. FAST Cache
.c
B. PFDC
C. Thick LUN
ps
D. FAST VP
m
Answer: C
Explanation:
du
am
References:
https://www.emc.com/collateral/white-papers/h15571-dell-emc-unity-compression.pdf
ex
Question: 100
id
al
In UnityVSA, what is the maximum storage capacity offered by the Professional license?
.v
A. 4 TB
w
B. 10 TB
w
C. 25 TB
w
D. 50 TB
//
s:
Answer: D
tp
Explanation:
ht
References:
https://www.emc.com/collateral/TechnicalDocument/docu69362.pdf
Question: 101
Which feature can be configured for a Unity File System NFS share?
A. Continuous Availability
B. Offline Availability
C. Host Access Level
D. Protocol Encryption
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 44/110
Answer: C
Explanation:
References:
https://www.emc.com/dam/uwaem/documentation/unity-p-configure-nfs-file-sharing.pdf
Question: 102
A Unity storage system is installed with 10Gb optical SFPs in CNA ports 4 and 5 of both Storage
Processors. The storage administrator receives from a user to connect to the storage system through
om
Fibre Channel.
How can the administrator address the request?
.c
A. Configure all CNA ports for 16Gb Fibre Channel
ps
B. Configure CNA port 4 of SPA and SPB as 10Gb opticalConfigure CNA port 5 of SPA and SPB as 16 Gb
Fibre Channel
m
C. Configure CNA port 4 and 5 of SPA as 10 Gb copperConfigure CNA ports 4 and 5 of SPB as 16 Gb
du
Fibre Channel
D. Once committed, CNA ports cannot be reconfigured without data loss.
am
Answer: D
ex
Explanation:
id
References:
al
https://www.emc.com/collateral/TechnicalDocument/docu60144.pdf
(page 5)
.v
w
Question: 103
w
w
A. Client access to data is switched to the target Unity system and the session can be rolled back if
s:
Canceled.
tp
B. Production data access is from Unity but the clients still connect to the interface of the VNX.
ht
C. Production data access is permanently set on Unity and the original data is deleted from VNX.
D. Client access to data is switched to the target Unity system and the session cannot be rolled back
or Canceled.
Answer: A
Explanation:
References:
https://www.emc.com/collateral/white-papers/h15163-dell-emc-unity-migration-technologies.pdf
Question: 104
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 45/110
What is a connectivity rule for hosts that connect to multiple Unity systems?
Answer: C
om
Question: 105
.c
What is a characteristic of FAST VP?
ps
A. User can enable or disable FAST VP at the LUN level
B. FAST VP optimizes data placement by moving 1GB slices between disk tiers
m
C. Once enabled, FAST VP data relocation runs in background runs in background at all times
du
D. User can set the FAST VP data relocation rate
am
Answer: B
ex
Question: 106
id
al
A. Imports NFSv3 configured NAS Server with its associated file systems from one Unity system to
w
another.
w
B. Provides mobility of NFSv3 datastores between Unity systems for ESXi host disaster recovery
w
C. Provides disaster recovery, replicating a VNX VDM and its file systems to a remote Unity system.
D. Migrates NFSv3 configured VDM with its associated file systems from a VNX system to a Unity
//
system.
s:
tp
Answer: D
ht
Question: 107
What is an advantage of using the InitCLI tool to assign an IP address to a Unity storage system?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 46/110
Answer: D
Explanation:
References:
https://www.emc.com/collateral/white-papers/h15085-dell-emc-unity-unisphere-overview.pdf
(p.7)
Question: 108
om
A. Shares
B. DNS configuration
.c
C. NTP configuration
D. NAS Server
ps
Answer: D
m
du
Explanation:
References:
am
https://www.dellemc.com/en-us/documentation/unity-family/unity-p-configure-nfs-file-sharing/03-
unity-nfs-c-ch-configuring-file-systems.htm
ex
Question: 109
id
al
Answer: D
tp
Explanation:
ht
References:
https://www.emc.com/collateral/white-papers/h16376-dell-emc-unity-cloud-tiering-appliance.pdf
Question: 110
A system administrator has asynchronous remote replication configured between a pair of systems
and replication is currently operating normally. When the administrator views a replication session
on the Unisphere Sessions page for the destination system, which option is available when viewing
“More Actions”?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 47/110
B. Failover
C. Pause
D. Sync
Answer: B
Explanation:
References:
https://www.emc.com/collateral/white-papers/h15088-dell-emc-unity-replication-technologies.pdf
(20)
om
Question: 111
.c
When the LUN Snapshot Restore operation is performed, what does the Unity system automatically
do before beginning the restoration process?
ps
A. Detaches the hosts from the snapshot
m
B. Creates a copy of the snapshot
du
C. Detaches the host from the LUN
D. Creates a snapshot of the LUN
am
Answer: B
ex
id
Question: 112
al
.v
A system administrator has placed the Storage Processor (SP) in Service Mode for maintenance.
Using Unisphere, they notice the mode field for the SP still displays both SPs as normal.
w
What is another indicator the administrator can check to verify that the SP is in Service mode?
w
w
Answer: C
Explanation:
References:
https://community.emc.com/docs/DOC-63405
Question: 113
A storage administrator notices that all the configured Host I/O Limit policies are Globally Paused.
How can the administrator put these policies into the Active state?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 48/110
A. Select the Host I/O Limit policy for each and configure the Host I/O Limits setting to Active.
B. From the Settings>Performance page, configure the Host I/O Limits settings to Resume.
C. From the Settings> Performance page, configure the Host I/O Limits settings to Active.
D. Select the Host I/O Limit policy for each and configure the Host I/O Limits setting to Resume.
Answer: D
Question: 114
om
A. Fibre Channel over IP
.c
B. iSCSI and Fibre Channel
C. Fibre Channel only
ps
D. iSCSI only
m
Answer: B
Explanation:
du
am
References:
https://www.emc.com/collateral/white-papers/h15091-dell-emc-unity-virtualization-integration.pdf
ex
Question: 115
id
al
A system administrator is configuring asynchronous remote replication for an existing NAS server and
.v
its associated file systems on a Unity system. What action(s) will meet the requirements?
w
A. Manually create replication sessions for each file system. The system will automatically create a
w
B. Manually create NAS Server replication session. The system will automatically create sessions for
the associated file systems.
//
C. Manually create replications for each associated file system. Then manually create a session for
s:
D. Manually create NAS Server replication session first. Then manually create replication sessions on
ht
Answer: C
Question: 116
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 49/110
Answer: D
Question: 117
om
B. SP must be rebooted after IP Packet Reflect is disabled.
C. SP Must be rebooted after IP Packet Reflect is enabled.
.c
D. Reply packets are sent via the same interface as the request packets.
ps
Answer: A
m
Explanation:
du
References:
https://www.emc.com/dam/uwaem/documentation/unity-p-configure-smb-file-sharing.pdf
am
(53)
ex
Question: 118
id
Answer: B
s:
tp
Question: 119
ht
Which Unity feature supports provisioning within vCenter, provides full visibility to physical storage,
and increases management efficiency?
A. VSI
B. ODX
C. ESI
D. VAAI
Answer: A
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 50/110
Question: 120
When creating a NAS Server replication session, which settings are required for the destination NAS
Server?
om
Answer: A
.c
Explanation:
References:
ps
https://www.emc.com/dam/uwaem/documentation/unity-p-replication-config.pdf
(30)
m
du
Question: 121
am
What is a consideration when managing Host I/O Limit polices?
ex
A. Only shared Host I/O Limit policies can be paused and resumed
B. All policies are resumed when any single policy is resumed
id
Answer: C
w
w
w
Question: 122
//
s:
Answer: B
Question: 123
Asynchronous remote replication is configured for a NAS Server and its associated file systems. What
operations can be performed to make data available if the primary site goes down?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 51/110
A. Failover operation on the NAS Server session, then a Failover operation on each of the file system
sessions
B. Failover with Sync operation on each of the file system sessions, then a Failover with Sync
operation on the NAS Server session.
C. Failover operation on each of the file system session, then a Failover operation on the NAS Server
session.
D. Failover with Sync operation on the NAS Server session, then a Failover with Sync operation on
each of the file system sessions.
Answer: A
om
Question: 124
.c
ps
After performing the initial configuration of a new UnityVSA, when do alerts concerning license
expiration first occur?
m
du
A. 7 days prior to expiration
B. 15 days prior to expiration
am
C. 1 month prior to expiration
D. 2 months prior to expiration
ex
Answer: C
id
al
Explanation:
References:
.v
https://www.emc.com/collateral/white-papers/h15092-dell-emc-unity-vsa.pdf
w
w
Question: 125
w
Answer: D
Explanation:
References:
https://www.dellemc.com/en-us/documentation/unity-family/unity-p-configure-smb-file-
sharing/06-unity-smb-c-ch-managing-quotas.htm
Question: 126
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 52/110
What is the maximum storage capacity supported by a Dell EMC UnityVSA with the Community
Edition subscription?
A. 4 TB
B. 10 TB
C. 25 TB
D. 50 TB
Answer: A
om
Explanation:
Reference http://cloudmaniac.net/dell-emc-unityvsa-free-storage-lab/
.c
Question: 127
ps
What is the purpose of a Proxy NAS Server?
m
du
A. Increase performance for shared network connections that access NAS Servers
B. Access Snapshot replicas on the destination side of a replicated file resource
am
C. Access Snapshots for testing production NAS Servers
D. Increase security of production NAS Servers
ex
Answer: B
id
al
Explanation:
Reference https://www.dellemc.com/resources/en-us/asset/white-
.v
papers/products/storage/h17122-dell_emc_unity-dr_access_and_testing.pdf (05)
w
w
Question: 128
w
DRAG DROP
//
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 53/110
om
.c
ps
m
Answer:
du
am
ex
id
al
.v
w
w
// w
s:
tp
ht
Question: 129
What are considerations when configuring a Proxy NAS Server?
A. Can be created on either SP regardless of where the replicated NAS Server residesMay utilize
different access protocols as the replicated NAS Server
B. Can be created on either SP regardless of where the replicated NAS Server residesMust use the
same access protocols as the replicated NAS Server
C. Must be created on the same SP as the replicated NAS ServerMust use the same access protocols
as the replicated NAS Server
D. Must be created on the same SP as the replicated NAS ServerDifferent access protocols may be
utilized as the replicated NAS Server
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 54/110
Answer: C
Question: 130
A. Config
B. Memory
C. Data
om
D. Swap
.c
Answer: A
ps
m
Question: 131
du
What is the correct method to initiate a Dell EMC Unity power down sequence?
am
A. Use the uemcli halt command
B. Switch both Standby Power Supplies to OFF
ex
Answer: C
.v
w
Question: 132
w
w
host. The administrator must use existing data contained on a LUN provisioned from a Dell EMC
s:
Which solution will meet the requirement and provide space efficiency?
ht
A. Create an Asynchronous Replication session for the LUNConfigure access to the replica LUN for the
secondary hostAttach the secondary host
B. Create a Snapshot of the LUNConfigure LUN access for the secondary hostAttach the Snapshot to
the secondary host
C. Create a Snapshot of the LUNConfigure secondary host connectivity to Dell EMC Unity XTAttach
the Snapshot to the secondary host
D. Create a Synchronous Replication session for the LUNConfigure access to the replica LUN for the
secondary hostAttach the secondary host
Answer: D
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 55/110
Question: 133
FAST VP tracks data for relocation within the pool at what size slices?
A. 128 MB
B. 256 MB
C. 512 MB
D. 1024 MB
Answer: B
om
.c
Question: 134
ps
The LUN Snapshot Attach to Host operation is being performed with Read/Write Access selected. By
m
default, what does the Dell EMC Unity system do before beginning the attach process?
du
A. Detaches the host from the Snapshot of any other LUN
B. Creates a Snapshot of the LUN
am
C. Detaches existing attached hosts from the LUN Snapshot tree
D. Creates a copy of the Snapshot
ex
Answer: D
id
al
.v
Question: 135
w
Answer: D
Question: 136
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 56/110
Answer: B
Question: 137
A. Divide the predate-reduction size of all storage resources and their snapshots by the postdata-
reduction size of all storage resources and their snapshots.
B. Add up the efficiencies gained from thin provisioning, Deduplication, and Compression.
om
C. Divide the predate-reduction size of all storage resources excluding their snapshots by the
postdata-reduction size of all storage resources excluding their snapshots.
.c
D. Add up the efficiencies gained from thin provisioning, Snapshots, and Compression.
ps
Answer: D
m
du
Question: 138
am
Which Dell EMC Unity XT storage resource allows modification of its block size during creation?
ex
B. VMFS datastore
C. VVol block datastore
al
D. NFS datastore
.v
Answer: C
w
w
w
Question: 139
//
s:
A company needs to expand their dynamic pool by 10 TB. The current dynamic pool consists of sixty-
tp
three 7.6 TB SSD drives that are configured for RAID5 12+1.
What is the minimum number of drives needed for the pool expansion?
ht
A. 1
B. 2
C. 13
D. 15
Answer: B
Question: 140
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 57/110
The preferred production interface is active. What does the Dell EMC Unity system do once a NAS
Server starts outbound traffic to an external service?
Answer: C
om
Question: 141
.c
Which layer of the Dell EMC Unity storage architecture provides access to both the virtual storage
pool and configured LUN resources?
ps
A. Enclosure Services Interface
m
B. Common software
du
C. SCSI Enclosure Services
D. Communications Management interface
am
Answer: D
ex
id
Question: 142
al
.v
A company plans to add five drives to a 30 drive SAS Flash 4 All-Flash pool on a Dell EMC Unity XT
600 storage array. Which drive type(s) can be used for the expansion?
w
w
Answer: B
ht
Question: 143
What block size do Dell EMC Unity systems use to copy highly accessed blocks of data from spinning
drives into FAST Cache?
A. 16 KB
B. 32 KB
C. 64 KB
D. 128 KB
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 58/110
Answer: C
Question: 144
om
D. Service Level, Drive Type, RAID Level, and Space Efficiency
.c
Answer: D
ps
m
Question: 145
du
What component is a hot-pluggable CRU?
am
A. DPE BBU
B. DPE I/O module
ex
Answer: C
.v
w
Question: 146
w
w
A. Resuming
tp
B. Disabled
C. Global Paused
ht
D. Error
Answer: C
Question: 147
Automatic shrink operations will trigger storage space reclamation on which type of storage
resources?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 59/110
B. Thick LUNs
C. Thin LUNs
D. Thin file systems
Answer: D
Question: 148
A user is setting up Dell EMC Unity network ports for connectivity between the NAS clients and NAS
Servers. In Unisphere, what can a user modify under the Access section of the Settings configuration
om
window?
.c
A. Speed and MTU only
B. Speed, MTU, and port aggregation
ps
C. Speed, MTU, and name of port
D. Speed and port aggregation only
m
du
Answer: C
am
Explanation:
Reference https://www.dellemc.com/en-us/documentation/unity-family/unity-p-cli-user-guide/03-
ex
unity-cli-br-configure-network-communication.htm
id
Question: 149
al
.v
DRAG DROP
The cache has sent data to the Data Reduction logic during proactive cleaning or flushing. What is the
w
Answer:
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 60/110
om
.c
ps
m
Question: 150
Answer: A
.v
w
w
Question: 151
// w
Which FAST VP operation can be performed from the System Settings window?
s:
Answer: A
Question: 152
Which VASA API protocol is used to integrate with Dell EMC UnityVSA over HTTPS?
A. SNMP
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 61/110
B. WSDL
C. SOAP
D. REST
Answer: D
Question: 153
A storage administrator has added multiple resources to a single density-based Host I/O Limit policy
for the following storage resources:
om
LUN A: 100 GB
LUN B: 100 GB
.c
LUN C: 600 GB
Density-Based Limit 10 IOPS
ps
What is the total IOPS set by this policy?
m
A. 80
du
B. 800
C. 810
am
D. 8,000
ex
Answer: D
id
al
Question: 154
.v
A. 1
w
B. 10
C. 25
//
D. 30
s:
tp
Answer: B
ht
Question: 155
Which storage pool object is created for every RAID group in a traditional pool?
A. Stripe Volume
B. Private LUN
C. Pool Slice
D. MetaLUN
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 62/110
Answer: B
Question: 156
Which Dell EMC Unity service task is used to reinstall the root operating system while leaving the
existing data intact?
om
D. Reimage the Storage Processor
.c
Answer: D
ps
m
Question: 157
du
On a Dell EMC Unity system, all hosts can be required to use which authentication method for iSCSI
am
interfaces?
A. PAP
ex
B. Kerberos
id
C. EAP
D. CHAP
al
.v
Answer: D
w
w
Question: 158
// w
A. Link Aggregation
B. VLAN tagging
ht
C. Bandwidth throttle
D. Mirrored writes
Answer: B
Question: 159
With Redirect on Write technology, when writes are made to the storage resource and more space is
required, what size is the slice allocated from the parent pool?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 63/110
A. 8 KB
B. 64 KB
C. 128 MB
D. 256 MB
Answer: D
Question: 160
What limitation should be considered when using Local NAS Server Mobility to move NAS Servers?
om
A. NAS Server’s active replication session must be deleted and re-created.
.c
B. A NAS Server that is a File Import destination can be moved.
C. NAS Server Mobility supports two concurrent NAS Server moves.
ps
D. NAS Server Mobility only supports a single NAS Server move at a time.
m
Answer: A
du
am
Question: 161
ex
What is the maximum number of Dell EMC Unity arrays that can participate is a Synchronous
id
Replication topology?
al
A. 2
.v
B. 4
C. 5
w
D. 16
w
w
Answer: A
//
s:
tp
Question: 162
ht
You are creating a dynamic pool using 12 drives in the Unisphere GUI. Which RAID stripe width will
be set when creating the dynamic pool using RAID 6?
A. 4+2
B. 6+2
C. 8+2
D. 10+2
Answer: D
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 64/110
Question: 163
Which FAST Cache operation proactively copies dirty pages to underlying hard disk drives?
Answer: A
om
Question: 164
.c
ps
What is a use case for Thin Clones?
m
A. Primary production
B. Development and testing
du
C. Offline backup
D. Data archiving
am
Answer: B
ex
id
Question: 165
al
.v
Which Dell EMC Unity model(s) supports the 12 Gb/s SAS I/O module?
w
C. Dell EMC Unity 500/550F and Dell EMC Unity 600/650F only
//
D. Dell EMC Unity 400/450F, Dell EMC Unity 500/550F, and Dell EMC Unity 600/650F only
s:
tp
Answer: C
ht
Question: 166
What is a consideration when attempting to downgrade from Integrated ESRS Two-way to ESRS One-
way?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 65/110
Answer: D
Question: 167
A Thin Clone has just been created. What operation can be performed on it?
om
Answer: D
.c
ps
Question: 168
m
du
What is a characteristic of the iSCSI interface on Dell EMC Unity storage arrays?
am
A. IQN aliases can be created optionally after the iSCSI interface is created.
B. IQN aliases are associated with an iSCSI interface.
C. IQNs are associated with a network port.
ex
D. An iSCSI interface can be created with both an IPv4 and IPv6 IP address.
id
Answer: C
al
.v
w
Question: 169
w
A. Asynchronous Replication
s:
B. Synchronous Replication
tp
Answer: C
Question: 170
Dell EMC Unity systems collect several metrics at various time intervals and use ESRS to send the
information to CloudIQ.
What are those metrics and their time intervals?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 66/110
Answer: A
Question: 171
During the configuration of ESRS, how is the Customer Contact Data verified?
om
A. Access code sent through email to the customer
B. Step taken during the ESRS Network check
.c
C. Step taken by the ESRS Policy Manager
D. Step taken during the readiness check for ESRS
ps
Answer: A
m
Question: 172 du
am
On which storage objects is data Reduction supported?
ex
id
Answer: D
w
// w
Question: 173
s:
tp
A storage administrator is tasked with creating a DR solution for block and file storage resources on a
Dell EMC Unity 650F system at a primary production site. The company has two other campus
ht
locations.
Campus A is located 50 km away and has a Dell EMC Unity 400 Hybrid system. Campus B is located
200 km away and has a Dell EMC UnityVSA system.
What should the storage administrator do to provide the best protection of storage resources while
meeting recommended latency levels?
A. Replicate block storage resources synchronously to Campus AReplicate file storage resources
asynchronously to Campus B
B. Replicate block storage resources synchronously to Campus AReplicate file storage resources
synchronously to Campus A
C. Replicate block storage resources asynchronously to Campus AReplicate file storage resources
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 67/110
synchronously to Campus A
D. Replicate block storage resources asynchronously to Campus BReplicate file storage resources
asynchronously to Campus A
Answer: C
Question: 174
om
A. Configure share permissions
B. Configure NAS Server registry settings
.c
C. Manage home directories
D. Manage local NAS Server users
ps
Answer: A
m
Question: 175 du
am
DRAG DROP
ex
What is the correct sequence of steps required to deploy a Dell EMC UnityVSA?
id
al
.v
w
w
// w
s:
tp
ht
Answer:
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 68/110
om
Question: 176
.c
What is the size of a Private LUN slice?
ps
A. 8 KB
m
B. 64 KB
C. 256 MB
du
D. 1024 MB
am
Answer: C
ex
Question: 177
id
al
A company has the following available drive types in their Dell EMC Unity 500 storage array:
.v
1.2 TB SAS
2 TB NL-SAS
w
100 GB SSD
w
1.6 TB SSD
w
3.8 TB SSD
//
What combination of drives can the company use to create a storage pool?
s:
Answer: D
Question: 178
A company needs to expand their dynamic pool by 5 TB. The current dynamic pool consists of sixty-
three 3.8 TB SSD that are configured for RAID5 4+1.
What is the minimum number of drives needed for the pool expansion?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 69/110
A. 1
B. 6
C. 7
D. 8
Answer: A
Question: 179
om
Refer to the exhibit.
.c
ps
Which port is used to connect the DPE to a DAE?
m
A. A
du
B. B
C. C
am
D. D
ex
Answer: B
id
al
Question: 180
.v
A. Copy on First Write, which requires a storage resource reserved to hold original data that changed
w
on parent pool.
s:
C. Copy on First Write, which requires no storage resource is needed to create a Snapshot, writes are
tp
copied pool.
D. redirect on Write, which requires a storage reserved to hold original data that changed to preserve
ht
Answer: D
Question: 181
When a manual snapshot of a file system is created, what items are required for its configuration?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 70/110
Answer: D
Question: 182
For high availability within iSCSI, connections should be attached using what?
om
A. Different subnets
B. Flow control
.c
C. Twinax cables
D. Jumbo frames
ps
Answer: A
m
Question: 183 du
am
What is a consideration when designing a replication solution using the native Dell EMC Unity
ex
replication feature?
id
A. Asynchronous remote replication supports replication to up to two remote Dell EMC Unity
al
systems
.v
B. Synchronous remote replication supports replication to up to two remote Dell EMC Unity systems
C. Synchronous remote replication supports replication to up to one remote Dell EMC Unity systems
w
D. Asynchronous remote replication supports replication to up to one remote Dell EMC Unity
w
systems
// w
Answer: A
s:
tp
Question: 184
ht
A storage administrator is planning to move a NAS Server to the peer SP on a Dell EMC Unity system.
The NAS Server and two of its associated file systems have active asynchronous replication sessions
to a remote Dell EMC Unity system.
How should the storage administrator proceed?
A. Manually pause the replication sessions for the NAS Server and file systems.
B. Set the RPO value to 1440 for the NAS Server and file system replication sessions
C. Set the RPO value to 0 for the NAS Server and file system replication sessions
D. Failover the replication sessions for the NAS Server and file systems
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 71/110
Answer: B
Question: 185
While examining the health status of a Dell EMC Unity array, the administrator notices the internal
SSD is in a faulted state.
Which condition caused this fault?
om
C. SP Cache had too many dirty pages to copy to the SSD
D. There are no spare blocks remaining on the SSD
.c
Answer: D
ps
m
Question: 186
du
am
You are implementing a new Dell EMC Unity 450F with twenty-five 7.6 TB SSD drives. You need to
standardize on a RAID5 4+1 stripe size.
What needs to be done to configure a dynamic pool?
ex
id
A. use UEMCLI to configure the pool with all the drives specifying RAID5 4+1 stripe width.
B. Use the service account via UEMCLI to configure the pool with all the drives specifying a RAID5
al
C. Use Unisphere to build a traditional pool using RAID5 4+1. Convent the traditional pool to a
dynamic pool once the zeroing of the drives is complete.
w
D. Use Unisphere to select all the drives and select RAID5 4+1 in the drop-down box.
w
w
Answer: D
//
s:
tp
Question: 187
ht
What can be used to initially configure a static management IPv6 address on a Dell EMC Unity array?
A. symcli
B. navisecCLI
C. uemcli
D. initCLI
Answer: C
Question: 188
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 72/110
Two fans have failed on the SPE. How much time does the Dell EMC Unity system allow before the SP
is shut down?
A. 2 min
B. 3 min
C. 4 min
D. 5 min
Answer: D
om
Question: 189
.c
What is a consideration when implementing a Thin Clone on a Dell EMC Unity array?
ps
A. Thin Clone is only supported on physical Dell EMC Unity systems.
m
B. Thin Clone can be expanded independently from the base LUN
du
C. Thin Clone can be created directly from the base LUN
D. Data Reduction can be enabled independently on source LUN and on Thin Clone
am
Answer: A
ex
id
Question: 190
al
.v
On a physical Dell EMC Unity system, what is the maximum size to which a UFS64 file system can be
extended?
w
w
A. 32 TB
w
B. 64 TB
C. 128 TB
//
D. 256 TB
s:
tp
Answer: D
ht
Question: 191
Which Dell EMC Unity service task would most quickly resolve connection problems between the
storage system and Unisphere?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 73/110
Answer: C
Question: 192
om
D. Thin Provision
.c
Answer: C
ps
m
Question: 193
du
What is used to create a Proxy NAS Server on a Dell EMC Unity array?
am
A. initCLI command
B. UEMCLI command
ex
C. Unisphere GUI
id
D. Service command
al
Answer: D
.v
w
Question: 194
w
w
What are the supported options for the Professional Edition of the Dell EMC UnityVSA?
//
s:
Answer: C
Question: 195
What is the role of Protocol Endpoints in Dell EMC Unity VMware storage provisioning?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 74/110
C. Provide a write consistent view to the host when accessing multiple VMware datastores
D. Establish a data path between the ESXi host and the respective VVol datastores
Answer: B
Question: 196
The soft limit quota for a file system has just been exceeded. What would you expect to occur
concerning data access?
om
A. Once the soft limit is reached, the grace period counts down until the hard limit is reached. New
data can be written as long as the hard limit has not been reached.
.c
B. Once the soft limit is reached, no new data can be added to the file system or directory.
C. If the soft limit remains exceeded and the grace period expires, no new data may be added to the
ps
particular file system or directory.
D. If the soft limit remains exceeded and the grace period expires, new data may be added to the
m
particular directory. The system will alert the grace period expired.
du Answer: A
am
ex
Question: 197
id
On a Dell EMC Unity file system asynchronous session, how many system Snapshots, in total, are
al
A. 1
w
B. 2
w
C. 4
w
D. 8
//
s:
Answer: B
tp
ht
Question: 198
Answer: B
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 75/110
Question: 199
A storage administrator is tasked with creating a DR solution for block and file storage resources. The
company has multiple regional and international sites containing a mix of physical and virtual Dell
EMC Unity systems.
What are considerations for the storage administrator in creating the DR solution?
A. Synchronous remote replication should be restricted to within 100 km between sites to keep
latency below 10 msBlock storage resources can be replicated synchronously and asynchronously
B. Asynchronous replication ensures zero data loss the remote replica in disaster conditionsBlock
om
storage resources can be replicated synchronously and asynchronously
C. Asynchronous replication over long-distance does not impact latencyAsynchronous replication
ensures zero data loss to the remote replica in disaster conditions
.c
D. Synchronous remote replication should be restricted to within 100 km between sites to keep
ps
latency below 10 msFile and block storage resources can be replicated synchronously and
asynchronously
m
du
am Answer: C
Question: 200
ex
Fibre Channel access from a server to the Storage Processor can use what pathing options?
id
al
D. Multipath only
w
Answer: B
// w
s:
Question: 201
tp
ht
A storage administrator is tasked with configuring a density-based Host I/O policy based on the
following requirements:
Resource Size: 100 GB LUN
Density Limit: 20 IOPS
What is the total IOPS set by this policy?
A. 120
B. 1,200
C. 2,000
D. 2, 100
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 76/110
Answer: A
Question: 202
A Storage administrator needs to expand their FAST Cache. The current configuration consists of four
200 GB SAS Flash 2 drives.
What can be used to expand the FAST Cache?
om
C. Two 200 GB SAS Flash 3 drives
D. Two 400 GB SAS Flash 3 drives
.c
Answer: A
ps
m
Question: 203
du
am
What are characteristics of the file system Snapshot Copy operation?
B. Parent can only be a read only SnapshotCopy will be a read/write SnapshotInherits the parent
Retention Policy
al
Answer: B
//
s:
tp
Question: 204
ht
Observing the SPE Fault LED during initial power up, what colors and time duration does the SPE use
to indicate that it is ready for initialization?
Answer: D
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 77/110
Question: 205
A. No Access
B. Read/Write, Allow Root
C. Read-Only
D. Read/Write
Answer: B
om
Question: 206
.c
ps
A storage administrator needs to shrink their FAST Cache. The current configuration consists of eight
200 GB SAS Flash 2 drives.
m
What is the maximum number of drives that can be removed from FAST Cache through an online
shrink operation?
A. 2
du
am
B. 4
C. 6
ex
D. 8
id
Answer: D
al
.v
Question: 207
w
w
Which protocols are supported by Dell EMC UnityVSA for storage provisioning?
// w
Answer: A
Question: 208
What is the maximum hierarchical Snapshot level, for both LUNs and file systems, on Dell EMC Unity
arrays?
A. 10
B. 16
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 78/110
C. 20
D. 32
Answer: A
Question: 209
A. Enable Data at rest Encryption at any time using Unisphere settings > manage Encryption
om
B. Enable data at rest Encryption, but only during initial configuration, using Unisphere settings >
Manage Encryption
.c
C. Install data at rest Encryption license at any time using Unisphere Settings > Install License
D. Install data at rest Encryption, but only during initial configuration
ps
Answer: C
m
Question: 210 du
am
Which VVol object stores a copy of a VM’s memory pages when the VM is powered on?
ex
id
A. Config
B. Memory
al
C. Data
.v
D. Swap
w
Answer: D
w
// w
Question: 211
s:
tp
A storage administrator is replicating a NAS Server from one Dell EMC Unity to another. The
destination system has a different network scheme than their source system.
ht
What operation must be done on the destination system NAS Server to ensure data is accessible
after failover?
A. No changes required
B. Change the Override properties
C. Create a new interface
D. Modify DNS Cache
Answer: B
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 79/110
Question: 212
What is the recommended configuration for iSCSI connections to ensure continuous access to the
Dell EMC Unity XT storage system in the event of a failover?
A. Create iSCSI interfaces on different network ports on the same SP that are combined into a link
aggregation
B. Set up iSCSI interfaces on the same port of each SP and leverage the host-based multi-pathing
software.
C. Set up iSCSI interfaces on the same port of each SP and configure advanced static routes for the
interfaces
om
D. Create iSCSI interfaces on network ports on different SPs that are combined into a FSN logical
device
.c
Answer: D
ps
m
Question: 213
du
When creating a new LUN on a Dell EMC Unity array using Unisphere, what is the default setting of
am
the Data Reduction feature?
ex
Answer: D
w
w
w
Question: 214
//
s:
Which feature can be configured for a Dell EMC Unity XT file system NFS share?
tp
A. Protocol Encryption
ht
Answer: C
Question: 215
What is a characteristic of the iSCSI interface on Dell EMC Unity storage arrays?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 80/110
Answer: C
Question: 216
What is a characteristic of the IP Packet Reflect feature running on a Dell EMC Unity NAS Server?
om
A. SP must be rebooted after the feature is enabled on the NAS Server
.c
B. Outbound packets use the same interface as the inbound packets
C. Communications initiated by the array do not require route table lookups
ps
D. Feature can only be enabled when the NAS Server is created via UEMCLI.
m
Answer: B
du
am
Question: 217
ex
A. Delete
al
B. Resume
.v
C. Sync
D. Create
w
w
Answer: B
// w
s:
Question: 218
tp
What is the maximum number of Thin Clones that can be created from a Base LUN on a Dell EMC
ht
Unity array?
A. 8
B. 16
C. 32
D. 64
Answer: B
Question: 219
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 81/110
In Unisphere, a storage administrator has inadvertently disabled Data Reduction on an existing LUN.
What would result from this action?
A. A background LUN migration occurs, moving the data to a new LUN where it is inflated.New data
is neither deduplicated nor compressed.
B. Existing data is left in its current state.New data is neither deduplicated nor compressed.
C. Existing data is dynamically inflated to its full size, undoing the impact of deduplication and
compression.New data is neither deduplicated nor compressed.
D. Data Reduction, once enabled, cannot be disabled.New data is deduplicated or compressed.
Answer: B
om
.c
Question: 220
ps
A storage administrator notices that all the configured HOST I/O Limits policies are Globally Paused.
m
How can the administrator put these policies into the Active state?
A. Select the Resume option on the Host I/O Limits Settings page
du
am
B. Select the Resume action for each Host I/O limits policy
C. Select the Active action for each Host I/O Limits policy
ex
D. Select the Active option on the Host I/O Limits Settings page
id
Answer: B
al
.v
Question: 221
w
w
In Unisphere, where can a storage administrator create an asynchronous LUN replication session?
w
Answer: A
Question: 222
What is a connectivity rule for a host that connects to multiple Dell EMC Unity systems?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 82/110
Answer: B
Question: 223
A Storage administrator needs to expand their FAST Cache by 400 GB. The current configuration
consists of two 400 GB SAS Flash 2 drives.
What can be used to expand the FAST Cache?
om
A. Two 200 GB SAS Flash 2 drives
B. Two 400 GB SAS Flash 2 drives
.c
C. Four 200 GB SAS Flash 3 drives
D. One 400 GB SAS Flash 2 drive
ps
Answer: A
m
Question: 224 du
am
DRAG DROP
ex
A user needs to re-image a Dell EMC Unity Storage Processor and resume normal operations. What is
id
Answer:
tp
ht
Question: 225
Which UEM/CLI command is used to verify the FC ports designated as synchronous on the SPs?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 83/110
Answer: B
Question: 226
om
A. 128 MB
.c
B. 256 MB
C. 512 MB
ps
D. 1024 MB
m
Answer: B
du
am
Question: 227
ex
According to best practices, what is the maximum latency of the link between local and remote
id
A. 5 ms
.v
B. 10 ms
C. 20 ms
w
D. 40 ms
w
w
Answer: B
//
s:
tp
Question: 228
ht
What is the minimum requirement for a server to boot from a Dell EMC Unity XT storage system via
iSCSI?
Answer: D
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 84/110
Question: 229
What is maximum amount of time allowed when saving a configuration from the Collect Service
Information menu from Unsphere in order to avoid a time-out?
A. 45 minutes
B. 60 minutes
C. 90 minutes
D. 120 minutes
Answer: B
om
.c
Question: 230
ps
What is the default setting of Advanced Deduplication when Data Reduction is selected within
m
Unisphere?
du
A. Disabled for thick LUNs and enabled for thin LUNs
B. Disabled for thin LUNs in an All-Flash pool
am
C. Enabled for thin LUNs in an All-Flash pool
D. Enabled for both thick and thin LUNs
ex
Answer: C
id
al
.v
Question: 231
w
What is a consideration when specifying a Dial Home suppression time for a Dell EMC Unity XT
w
storage array?
// w
Answer: C
Question: 232
A storage administrator configured a Hybrid Dell EMC Unity XT storage system using one default port
containing three disk types. They need additional Flash capacity.
What is the correct way to expand the pool?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 85/110
Answer: A
Question: 233
What storage resources can be provisioned to a host that is connected to a Dell EMC Unity XT storage
system via Fibre Channel?
om
A. LUNs, CIFS shares, and Consistency Group LUNs
.c
B. VMFS datastores, NFS datastores, and VVol(file) datastores
C. LUNs, Consistency Group LUNs, and NFS datastores
ps
D. Consistency Group LUNs, VMFS datastores, and VVol (block) datastores
m
Answer: B
du
am
Question: 234
ex
The preferred production interface is active. What does the Dell EMC Unity XT system do once a NAS
id
Answer: C
//
s:
tp
Question: 235
ht
A company has a VMware host installed with FC HBAs that is connected to a Dell EMC Unity XT
storage array. A 500 GB LUN is provisioned to this host from the Unity array and is in production. The
VMware administrator has configured a new vSwitch with the NICs on the server intended for iSCSI
traffic. The storage administrator is asked to configure software iSCSI and provision a new 1 TB LUN
from the storage array via iSCSI.
What is a consideration when satisfying this request?
A. A connection must be established between the host iSCSI initiators and Unity iSCSI targets before
provisioning the new LUN
B. Any single host should connect to any single array using one protocol only
C. The iSCSI configuration must use all the NIC connections to the host
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 86/110
D. Two iSCSI target interfaces must be configured with IP addresses from separate subnets
Answer: D
Question: 236
A company with multiple remote offices has decided to use synchronous replication. What systems
support this capability?
om
B. Dell EMC UnityVSA only
C. Dell EMC UnityVSA and VNXe
.c
D. Dell EMC Unity XT only
ps
Answer: C
m
du
Question: 237
am
How does Dell EMC Unity XT differ from Dell EMC UnityVSA?
ex
B. Unity XT supports host I/O limits and monitoring and reportingUnityVSA supports monitoring and
reporting only
al
D. UnityXT supports monitoring and reporting onlyUnityVSA supports host I/O limits and monitoring
and reporting
w
w
Answer: C
// w
s:
Question: 238
tp
By default, the storage system transfers log information on which network port?
ht
A. 138
B. 464
C. 514
D. 2049
Answer: C
Question: 239
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 87/110
A storage administrator has added multiple resources to a single density-based Host I/O Limit policy
for the following storage resources:
LUN A: 25 GB
LUN B: 25 GB
LUN C: 50 GB
Density-Based Limit 20 IOPS
What is the total IOPS set by this policy?
A. 200
B. 500
C. 2000
D. 2500
om
Answer: A
.c
ps
Question: 240
m
du
DRAG DROP
What is the correct sequence of steps taken by the storage array during the synchronous replication
am
process?
ex
id
al
.v
w
w
// w
s:
tp
ht
Answer:
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 88/110
om
.c
ps
m
du
am
ex
Question: 241
id
D. Asynchronous Replication
w
w
Answer: B
//
s:
tp
Question: 242
ht
When configuring integrated ESRS access to a Dell EMC Unity XT array, which firewall ports need to
be open?
Answer: A
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 89/110
Question: 243
A. File Size
B. Block
C. User
D. Directory Tree
Answer: B
om
Question: 244
.c
ps
You are initializing a Dell EMC Unity XT system. What are the default user credentials?
m
A. admin/password 123#
B. administrator/password123#
du
C. admin/Password123#
D. administrator/Password123#
am
Answer: A
ex
id
Question: 245
al
.v
While provisioning storage on a Dell EMC Unity XT array, the Create LUN wizard becomes
w
unresponsive. To resolve the issue, the storage administrator plans to restart the management server
from the Unisphere GUI.
w
A. Global admin
s:
B. Local admin
C. LDAP user
tp
D. Service
ht
Answer: D
Question: 246
What types of file retention are available with the Dell EMC Unity XT family arrays?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 90/110
Answer: C
Question: 247
A storage administrator performs a monthly performance analysis of a Dell EMC Unity XT storage
array using CloudIQ insight reports. Three LUNs are set with a Host IO Limits policy. The administrator
discovers that the throughput IOPS on one LUN (Test_LUN) has increased by 1000 IOPS compared to
the two previous months.
om
What is a possible root cause of the spike in IOPS?
.c
A. Test_LUN was expanded by 100 GB and a Density-based Host IO limit policy was set for all three
LUNs
ps
B. Test_LUN was expanded by 100 GB and a Density-based Host IO limit policy was set only for
Test_LUN
m
C. Host IO limit of Test_LUN was edited and the limit was increased by 1000 IOPS
du
D. Another Absolute Host IO limit policy with additional 1000 IOPS was set on Test_LUN
am
Answer: C
ex
Question: 248
id
al
A storage administrator needs to shrink their FAST Cache on a Dell EMC Unity XT storage system. The
.v
shrink operation?
w
w
A. 2
B. 4
//
C. 5
s:
D. 6
tp
ht
Answer: A
Question: 249
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 91/110
A. 1
om
B. 2
C. 3
.c
D. 4
ps
Answer: C
m
du
Question: 250
am
What features are available with Dell EMC UnityVSA?
ex
Answer: C
w
w
w
Question: 251
//
s:
DRAG DROP
tp
What is the correct sequence of steps to provision storage for SMB NAS clients?
ht
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 92/110
om
.c
ps
Answer:
m
du
am
ex
id
al
.v
w
w
// w
Question: 252
s:
A storage administrator attempts to restart the Management Server to resolve Unsphere issues, but
tp
Answer: A
Question: 253
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 93/110
Answer: D
Question: 254
om
Which IO modules are supported on the Unity 380/380F?
.c
A. 25 GbE optical12 Gb’s SAS
ps
B. 12 GB’s SAS10 GbE Base-T
C. 16 Gb’s Fibre Channel10 GbE Base-T
m
D. 6 Gb’s SAS12 Gb’s SAS
du Answer: B
am
ex
Question: 255
id
An administrator initially created a Thin Provisioned file system on Dell EMC Unity. They now want to
al
What is a consideration?
w
Answer: B
tp
ht
Question: 256
A. Drive speed
B. Stripe width
C. Drive type
D. D@RE
Answer: B
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 94/110
Question: 257
When scheduling snapshots, what is the smallest snapshot frequency that can be selected?
A. Days
B. Hours
C. Minutes
D. Seconds
om
Answer: B
.c
Question: 258
ps
m
Assuming that there are 240 snapshots created for the Base LUN on a Dell EMC Unity XT array, what
is the maximum number of Thin Clones that can be created from that Base LUN?
A. 8
du
am
B. 16
C. 32
ex
D. 64
id
Answer: D
al
.v
Question: 259
w
w
A. Select the LUN, then select the Pool to move the LUN into, then choose the Move operation
s:
B. Choose the Move operation, then select a LUN, then select the Pool to move the LUN into
C. Select a LUN, then choose the Move operation, then select the Pool to move the LUN into
tp
D. Select the Pool to move the LUN into, then choose the Move operation, then select a LUN
ht
Answer: C
Question: 260
What are the available file system states within an FLR-enabled file system?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 95/110
Answer: B
Question: 261
om
C. Maximum number of drives is 64 in a drive partnership group
D. Minimum of drives in a RAID5 (4+1) RAID Group is 5
.c
Answer: C
ps
m
Question: 262
du
am
What is the first step to configure asynchronous replication for a storage resource?
Answer: D
w
w
Question: 263
// w
What is a possible reason for the health score of 70 that is associated with the Test_Dev storage
pool?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 96/110
Answer: C
Question: 264
DRAG DROP
Match each Dell EMC tool to its respective function.
om
.c
ps
m
du
am
ex
Answer:
id
al
.v
w
w
// w
s:
tp
ht
Question: 265
A storage administrator is monitoring the pool Capacity of two identical Dell EMC Unity XT systems.
Each system has every LUN replicated to the other system and all replication sessions are in sync.
Both systems are used for production storage. CloudIQ is receiving updates from both systems, but
shows that one of them is filling up more quickly than the other.
What is a possible explanation for this behavior?
A. One of the Unity XT systems is used less than the other one.
B. Dell EMC Unity Data Reduction is not identically enabled on LUNs on both systems.
C. CloudIQ is not receiving the same amount of updates from one of the two systems.
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 97/110
D. Dell EMC Unity Data Reduction license is not enabled on one of the two systems.
Answer: B
Question: 266
A storage administrator has configured an SMB share with the Pool Automatic Deletion retention
policy.
With default settings applied, what will happen when the pool crosses 95%?
om
A. The Dell EMC Unity system will only delete the oldest snapshot of the configured schedule.
B. Nothing. The default setting is that no snapshots will be deleted automatically.
.c
C. The Dell EMC Unity system will delete snapshots until 85%, pool space is reached.
D. Nothing. When the snapshot reaches 25% of the pool size, snapshots will be deleted until 20% of
ps
the pool size is reached.
m
Answer: C
du
am
Question: 267
ex
Answer: B
// w
Reference:
s:
https://www.dellemc.com/en-au/collaterals/unauth/technical-guides-support-
information/products/ storage/docu69895.pdf
tp
ht
Question: 268
A user observes a system alert that indicates an error has occurred that the user should be aware of,
but does not have significant impact on the system.
Which severity level is this alert?
A. Error
B. Warning
C. Information
D. Notice
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 98/110
Answer: B
Reference:
https://www.dellemc.com/fr-ma/collaterals/unauth/technical-guides-support-
information/products/ storage/docu86751.pdf
Question: 269
A. VVols
om
B. Snapshots only
C. Snapshots and Thin Clones
.c
D. Thin Clones only
ps
Answer: C
m
du
Question: 270
am
What is a benefit of using VVols?
ex
B. Enables backup of Dell EMC Unity file data to a tape library unit
C. Individual VMs on a datastore can be snapped
al
Answer: A
w
w
Reference:
w
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/products/virtualvolumes
//
/ vmware-virtual-volumes-faq.pdf
s:
tp
Question: 271
ht
A storage administrator wants to expand the current FAST Cache size from 1.2 TB to the maximum
allowed size on a Dell EMC Unity XT 880.
How many drives, and of what type, do they need to add?
Answer: A
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 99/110
Question: 272
How does Dell EMC Unity XT differ from Dell EMC UnityVSA?
om
D. Unity XT supports both synchronous and asynchronous replication.
UnityVSA supports asynchronous replication only.
.c
Answer: D
ps
m
Question: 273
A. 1
tp
B. 2
ht
C. 3
D. 4
Answer: B
Question: 274
A Windows test server ran a stress test program that generated a large amount of throughput. This
resulted in performance slowdowns on production hosts sharing the same VMFS datastore.
What Dell EMC Unity XT feature can the storage administrator use to prevent a re-occurrence of this
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 100/110
problem?
A. Data Reduction
B. FAST Cache
C. File System Quotas
D. Host I/O Limits
Answer: C
Question: 275
om
Which Dell EMC Unity XT model(s) supports the 12 Gb/s SAS I/O module?
.c
A. 380/380F
ps
B. 880/880F only
C. 480/480F, 680/680F, and 880/880F
m
D. 680/680F and 880/880F only
du Answer: A
am
Reference:
ex
https://www.dellemc.com/en-ug/collaterals/unauth/technical-guides-support-
information/products/ storage/docu69319.pdf
id
al
Question: 276
.v
Which command can be issued from the vSphere client to configure an IP management address?
w
w
A. svc_initialize_system
w
B. svc_initialize_config
C. svc_initial_system
//
D. svc_initial_config
s:
tp
Answer: D
ht
Reference:
https://www.dellemc.com/hr-hr/collaterals/unauth/technical-guides-support-information/products/
storage/docu69316.pdf
Question: 277
Using the fan-out topology, what is the maximum number of sites a resource can be replicated to
asynchronously?
A. 2
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 101/110
B. 4
C. 6
D. 8
Answer: B
Reference:
https://www.dellemc.com/en-us/collaterals/unauth/white-papers/products/storage/h15088-dell-
emc- unity-replication-technologies.pdf
Question: 278
om
DRAG DROP
.c
What is the correct order of steps to power up a Dell EMC Unity XT storage system?
ps
m
du
am
ex
id
al
.v
w
w
Answer:
// w
s:
tp
ht
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 102/110
om
.c
ps
m
Question: 279 du
am
What is the default MTU value for the NAS Server interface?
ex
id
A. 1280 bytes
B. 1500 bytes
al
C. 9000 bytes
.v
D. 9216 bytes
w
Answer: B
w
// w
Question: 280
s:
tp
Which IP connection characteristic is used only for file-based storage configurations on Dell EMC
Unity XT?
ht
A. Link aggregation
B. VLAN tagging
C. Bandwidth throttle
D. Network latency
Answer: B
Question: 281
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 103/110
What is a consideration when configuring automated software downloads on a Dell EMC Unity XT
storage array?
Answer: D
om
Question: 282
.c
Which storage objects support Advanced Deduplication?
ps
A. VMFS datastores and VVols
m
B. Thin LUNs and thick LUNs
du
C. Thick LUNs and VVols
D. Thin LUNs and thin VMFS datastores
am
Answer: D
ex
id
Question: 283
al
.v
A storage administrator configured a Hybrid Dell EMC Unity XT storage system using one pool
containing SAS Flash 4 drives. They need more space, but in order to keep the additional cost as low
w
B. Add one or more RAID Groups of NL-SAS drives to the existing pool
s:
Answer: C
Reference:
https://www.delltechnologies.com/sr-me/documentation/unity-family/unity-p-pool-config/01-
unity- pool-br-intro-to-pools.htm
Question: 284
What pathing options are supported by Dell EMC Unity XT systems to provide a host with Fibre
Channel access to block storage?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 104/110
Answer: B
Reference:
https://www.dellemc.com/zh-tw/collaterals/unauth/technical-guides-support-
information/products/ storage/docu69325.pdf
om
Question: 285
.c
DRAG DROP
ps
What is the correct order of steps to attach a snapshot to a host?
m
du
am
ex
id
al
.v
w
Answer:
w
// w
s:
tp
ht
Reference:
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 105/110
https://community.emc.com/docs/DOC-66549
Question: 286
What is a benefit of Dell EMC Unity XT Series dynamic pools?
Answer: A
om
Explanation:
.c
A pool type introduced in Dell EMC Unity OE version 4.2toprovide space to storage resources.
Dynamic pools allow for flexible deployment models, and reduced rebuild times and flash wear
ps
compared to Traditional pools. A dynamic pool is created when creating a pool in Unisphere in Dell
EMC Unity OE version 4.2 and later. Dynamic pools are only supported on Dell EMC Unity all-flash
m
systems.
du
Reference:
https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/h16289-
am
dell_emc_unity-dynamic_pools.pdf
ex
Question: 287
id
An administrator wants to migrate an FLR-enabled file system with DHSM-enabled from a Dell EMC
al
Answer: B
tp
ht
Explanation:
FLR is supported when using Native File Import to migrate fromVNX to Unity.
If the source file system is FLR-enabled, the destination is provisioned with the same FLR settings No
ability to reconfigure FLR settings during importRetention periods and lock status are migrated.
If an FLR file system is being imported, DHSM must be configured on the VNX
Reference:
https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/h17523-
dell_emc_unity_file_level_retention_flr.pdf
Question: 288
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 106/110
A. Copy on First Write requires a storage resource reserved to hold original data that changed to
preserve the point-in-time view
B. Redirect on Write requires a storage resource reserved to hold original data that changed to
preserve the point-in-time view
C. Redirect on write requires no storage resource to create a Snapshot, writes are redirected on
parent pool
D. Copy on First Write requires no storage resource to create a Snapshot, writes are copied to parent
pool
Answer: B
om
Reference:
https://www.dellemc.com/bs-ba/collaterals/unauth/white-papers/products/storage/h15089-
.c
dell_emc_unity-snapshots_and_thin_clones.pdf (9)
ps
Question: 289
m
du
What remote service is required to enable Remote Logging in the Dell EMC Unity XT system?
am
A. SNMPv3
B. Syslog
ex
C. SNMPv2
D. Unisphere agent
id
Answer: B
al
.v
Explanation:
w
Before configuring remote logging for a storage system, you must configure each remote system to
w
receive logging messages from the storage system. A root/administrator on the receiving computer
can configure the remote syslog server or rsyslog server to receive log information by editing the
w
syslog server or rsyslog server configuration file (syslogng.conf or rsyslog.conf) on the remote
//
system.
s:
Reference:
tp
https://www.delltechnologies.com/en-us/documentation/unity-family/unity-p-security-config-
guide/03-vxe-c-sec-config-chap-logging.htm
ht
Question: 290
What is the result of enabling Data Reduction on a LUN in a Consistency Group containing three
LUNs?
A. All writes to all Consistency Group LUNs will go through the Data Reduction logic
B. Any writes to the LUN will go through the Data Reduction logic
C. Data Reduction will be enabled on all LUNs is the Consistency Group
D. Data Reduction and Advanced Replication will be enabled on all LUNs
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 107/110
Answer: C
Reference:
https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/h16870-
dell_emc_unity-data_reduction.pdf
Question: 291
In an asynchronous replication, what is the maximum number of replicated NAS Servers supported
for the Dell EMC Unity XT 380 series?
om
A. 64
B. 90
.c
C. 128
D. 256
ps
Answer: B
m
du
Reference:
https://www.dellemc.com/en-us/collaterals/unauth/white-papers/products/storage/h15088-dell-
am
emc- unity-replication-technologies.pdf (77)
ex
Question: 292
id
Answer: A
s:
Reference:
tp
https://esxsi.com/2016/11/28/unity-replication/
ht
Question: 293
Answer: D
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 108/110
Reference:
https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/h17523-
dell_emc_unity_file_level_retention_flr.pdf (6)
Question: 294
A. KVT
om
B. puTTY
C. IPMI
D. IMT
.c
ps
Answer: C
m
Reference:
du
https://community.emc.com/docs/DOC-63404
am
Question: 295
ex
What is the default file system quota policy on the Dell EMC Unity XT storage array?
id
A. File Size
al
B. Blocks
C. User Quotas
.v
D. Tree Quotas
w
w
Answer: A
w
Explanation:
//
When using quotas, administrators have the option to calculate file system usage in one of two ways.
s:
This option, which is configured on a per file system basis, may be set to File Size or Block based
tp
calculation. When using the default setting of File Size, disk usage is calculated based on logical file
ht
sizes in 1K increments. Because of this, it is possible that used space may be reported from a quota
perspective as more than the actual usage if holes exist in a sparse file. This setting is generally
recommended for Windows environments. The Block quota policy calculates disk usage in 8-16KB file
system blocks, and is accurate with regard to the actual allocation down to the block level. This
setting is recommended for UNIX environments.
Reference:
https://www.dellemc.com/en-zm/collaterals/unauth/white-papers/products/storage/h15572-dell-
emc-unity-nas-capabilities.pdf
Question: 296
What benefit does the Dell EMC Unity XT UEMCLI tool provide compared to the Unisphere GUI?
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 109/110
Answer: A
Explanation
Reference:
https://www.dellemc.com/en-us/collaterals/unauth/white-papers/products/storage/h17827-dell-
om
emc- unity-operating-environment.pdf (12)
Question: 297
.c
ps
A storage administrator wants to create datastores using VMware VASA APIs and IP networking.
Which type of datastore should be used?
m
du
A. File datastore
B. Block datastore
am
C. VVol (file)
D. VVol (block)
ex
Answer: D
id
al
Reference:
<https://www.delltechnologies.com/hr-hr/documentation/unity-family/unity-p-vvols-config/01-vxe-
.v
tn- vvols-br-manage-vvol-datastores.htm>
w
w
// w
s:
tp
ht
https://www.validexamdumps.com/E20-393.html
Questions and Answers PDF 110/110
om
.c
ps
m
du
am
ex
id
al
.v
w
w
// w
s:
tp
ht
https://www.validexamdumps.com/E20-393.html