An active butterworth band pass filter was designed using resistors of 1.4k, 2.73k, 100 and 5 ohms and two 47nf capacitors in a circuit with an opamp. The circuit was simulated in LT spice and showed the band pass filtering effect between the input and output voltages as observed on an oscilloscope, demonstrating the successful construction of the active butterworth band pass filter.
An active butterworth band pass filter was designed using resistors of 1.4k, 2.73k, 100 and 5 ohms and two 47nf capacitors in a circuit with an opamp. The circuit was simulated in LT spice and showed the band pass filtering effect between the input and output voltages as observed on an oscilloscope, demonstrating the successful construction of the active butterworth band pass filter.
An active butterworth band pass filter was designed using resistors of 1.4k, 2.73k, 100 and 5 ohms and two 47nf capacitors in a circuit with an opamp. The circuit was simulated in LT spice and showed the band pass filtering effect between the input and output voltages as observed on an oscilloscope, demonstrating the successful construction of the active butterworth band pass filter.
1) Aim: To design an active butterworth band pass filter.
Apparatus: Resistors of values 1.4k, 2.73k, 100 and 5 ohms, two capacitors of 47nf, opamp etc. Experiment: Design an active band pass filter as follows.
R1=R 2=1400 Ω,C 1=C2 =47 n F, R f =1.95 R1=2.73 k .
Measure Vout and Vin in oscilloscope
Observation: Simulation of circuit in LT spice
Conclusion: An active butterworth band pass filter is constructed.