Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Name: Fernandez, Aleksandria Donne D.

Section: DMET 1-1 Date: Grade:

Finals Engine Rebuilding I

I. (2 points each)
1. a mechanical device that is attached to crankshaft to receive energy from
clutch disk Flywheel
Answer:
2. the portion of the transmission that covers the flywheel and the clutch or torque
converter of the transmission
Answer: Bellhousing
3. What is the name of the part of the vehicle delivers the amount of fuel in
Carburetor
Answer:
4. EFI stands for.
Answer: Electronic Fuel Injection
5. What is the name of the part of the vehicle inject the fuel in the combustion
chamber
Answer: Fuel Injector
6. It is an engine which generates mechanical power by combustion of a fuel
Answer: Heat Engine
7. the cylinders are placed in a straight line
Answer: Straight Cylinder Engine
8. It is a pressure release system present in most turbocharged engines. Its main
purpose is to take the load off the turbocharger when the throttle is suddenly
closed.
Answer: Blow-off Valve
9. is a rotating shaft which (in conjunction with the connecting rods) converts
reciprocating motion of the pistons into rotational motion.
Answer: Crankshaft

10. It is a material such as coal, gas, or oil that is burned to produce heat or power.
Answer:
Fuel
II. (2 point each answer)
1. How many kilometres of the 2 types of change oil
Answer: 5,000 km 10,000 km
2. 2 types of Force Induction
Answer: Superchargers Turbochargers
3. 2 types of Material used as fuel in Combustion Engine mixes with the air
Answer: Gasoline Diesel
4. Give 2 example of where you find the combustion engine
Answer:
5. It synchronizes the rotation of the crankshaft and the camshaft(s) so that the
engine's valves open and close at the proper times during each cylinder's intake
and exhaust strokes.
Answer: Timing Belt Timing Chain

III. (2 points each)

Flywheel Camshaft

Fuel Injector Throttle Body Mufflers


Supercharger Turbocharger Engine

Air Filter Turbo Intercooler Blow-off Valve

Oil Bucket Jack Stand Crankshaft


IV. Write the meaning of the engine (10 pts each engine name)

1JZGTTE (10pts)
1JZ- 1st Generation Engine Block Code
G- Racing Performance Engine
TT- Twin Turbo
E- EFI

RB20TE (10pts)
RB - Responsive and Balanced
20 - 2.0 Liters
T - Turbo
E – EFI

V. Draw the Turbo engine diagram (10 points)


Name all the parts needed for the diagram
Air Outlet
Turbine Wheel
Exhaust Outlet
Compressor Wheel

You might also like