Professional Documents
Culture Documents
Cat Atys-C35 en
Cat Atys-C35 en
ATS Controller
digital functions
Transfer switches
new
The solution for
ATyS C35
Strong points
References
Description Reference
ATyS C35 – ATS controller 1600 0035
ATyS r - Remotely operated Transfer Switching Equipment 9523 xxxx (1)
(1) xxxx variable based on the number of poles and rating.
2 Catalogue
ATyS C35
ATS Controller
digital functions
96
92
6. Mimic panel. 5
atysc_0xxx_a.ai
3
4
138
atysc_001_b_1_x_cat.ai
Characteristics
Electrical characteristics Mechanical characteristics
AC operating limits 184 (1) - 300 VAC Weight 845 gr
Optional DC supply 10-30 VDC Door cutout 138 x 92 mm
Frequency limits 45 - 65 Hz Operating temperature -25 … +70°C
Power consumption < 10 W Communications
Inputs 4 fixed 3 programmable Interface type RS485. 2 to 3 half duplex wires
Outputs 4 fixed - 1 programmable(3) Protocol MODBUS RTU
External DPS max current (240 VAC) 6A AC1 - 1.5A AC15 Baud rate 2400-38400
(2)
Impulse withstand 6/4 kV (1) 200 VAC in contactor mode.
Overvoltage category CAT 3 (2) 6
kV tested between phases of a different source and 4 kV tested between phases of a the
same source.
(3) Only in main-main mode.
Terminals
70 71 72 73 F1 F2 91 92 93 94 35 36 37 52 54 51
C I II 0 - +
DC
INPUTS FIRE CTRL RS485 GENSET
INPUT OUTPUT
1 2 3 4 7
9
1. Switch position inputs
CONTROL SIGNAL 2. DC fire input (forces 0 & inhibit)
OUTPUTS 3. Control inputs
8 5 6 5 4. RS485 communication
5. DPS input (source 1 and 2)
atysc_003_d_1_en_cat
Catalogue 3