Professional Documents
Culture Documents
StoPox SK 21 S - Crack Repair Cutting V-GrooveT
StoPox SK 21 S - Crack Repair Cutting V-GrooveT
4. Mix StoPox SK 21-S that come in two portions with a scrapper until it is uniform in colour.
5. Patch the V-groove with StoPox SK 21-S epoxy mortar and level with a scrapper.
2. Install a layer of fibermesh onto the waterproofing coating while still wet.
3. Apply another coat of waterproofing coating after the first of waterproofing is dried.
Please note that all advice, recommendations, specifications or information are given in good faith. While efforts are made to ensure that they are accurate and correct, Sto SEA Pte Ltd has no
continuous control over where or how the products are applied. As such, Sto SEA Pte Ltd cannot accept any liability either directly or indirectly arising from the use of these products.