Professional Documents
Culture Documents
Vertical Coal Mill Classifier Bearing System Central Column Problem Report
Vertical Coal Mill Classifier Bearing System Central Column Problem Report
Vertical Coal
Vertical
Vertical MillMill
Coal
Coal Mill Classifier Shaft
Classifier
Classifier Bearing
system centralAssembly
Bearing column problem Report
Shaft ReportReport
Submitted by:
Sr.Insepction Engineer:
Mohammed Gamal Abd El-Hafeez
[Type the company name]
6/15/2020
June 15, 2020
Introduction
This report will describe the problem in central column of separator bearing system verticality.
Mill casing
199
Central column
Bearing system central column centered inside the mill housing by 3 supports on 120 0 item no.130.
Problem Description
The bearing system central column is out of verticality means its center line has a slope with the vertical plane the
issue that makes the central column flange don’t rest properly tilted on the mill casing flange that leading to
breakage of fasten bolts item no.199 due to un even load.
Measuring the verticality on the lower bearing housing due to it’s a machined surface by spirit level
Brocken fasten bolts between central column flange and mill casing flange
That explain why the drive coupling has an angular misalignment and always adjusted by un even shimming on the
circumference.