Professional Documents
Culture Documents
Final Color
Final Color
Final Color
: BGS-MX-001 Version:B8
Document Title: Painting Page 30 of 42
TABLE 4
Colour Colour Number
(For package units piping refer to A.2.3.0)
EQUIPMENT-FURNACES
Furnace casing & attached steel work Light Grey RAL 7035
Steel work not connected to casing Tarpaulin Grey RAL 7010
Stacks & flue duct White Aluminium RAL 9006
Top of Stack Vermilion RAL 2002
Ladders & walkways Galvanised only Not painted
Handrail assemblies See Note 3 Golden Yellow RAL 1004
EQUIPMENT-AIR COOLERS
Surfaces operating from ambient to 93°C Tarpaulin Grey RAL 7010
Surfaces operating from 94° to 538°C White Aluminium RAL 9006
EQUIPMENT-MISCELLANEOUS
Columns, vessels, exchangers, boilers & N2 Light Grey RAL 7035
storage vessels (COMPANY owned)
Spheres Signal White RAL 9003
H2 storage vessels (COMPANY owned) Yellow Ochre RAL 1024
Ejectors & Filters Pure Orange RAL 2004
Relief valves and control valves Golden Yellow RAL 1004
Interlocked, locked open & locked closed Golden Yellow RAL 1004
valves.
Actuators of control valves Golden Yellow RAL 1004
Emergency block valves. (Auto & Manual.) Emerald Green RAL 6001
Emergency shutdown valves, depressurising
valves and associated actuators.
Gas Storage (Company owned) Light Grey RAL 7035
Nitrogen (temp. above 80 C) Signal White & 9003-1004
Golden Yellow
band
Filling station, chain blocks, overhead crane Golden Yellow RAL 1004
assembly & body, guide beam, mobile
cranes and fork lifts, push buttons
Fire trucks Vermilion RAL 2002
Truck loading arms Light Grey RAL 7035
It is the responsibility of the user to ensure that they are using the latest revision of this document.
Doc. No.: BGS-MX-001 Version:B8
Document Title: Painting Page 31 of 42
TABLE 4
Colour Colour Number
Air conditioning system Pale Green RAL 6021
Workshop equipment Reseda Green RAL 6011
Extinguishers (based on contents)
Water Vermilion RAL 2002
Dry chemical powder Gentian Blue RAL 5010
Carbon dioxide (CO2 ) Jet Black RAL 9005
Halon Pale Green RAL 6021
Foam Grey Aluminium RAL 9007
STRUCTURAL STEEL
External steel work - See Note 3 Tarpaulin Grey RAL 7010
Stair treads, walkways Galvanised only Not painted
Support steel work for ladders & walkways Signal Gray RAL 7004
See Note 3
Staircase and Ladders - See Note 3 Signal Gray RAL 7004
Handrail assemblies (all areas) - See Note 3 Golden Yellow RAL 1004
Protective shelters Pigeon Blue RAL 5014
Fence stretcher bar Capri Blue RAL 5019
Flare structure See note 4 Light Gray RAL 7035
MACHINERY
Pumps (operating to 93°C & uninsulated), Reseda Green RAL 6011
compressors, motors, blowers
Pumps (insulated and uninsulated operating
above 93°C) White Aluminium RAL 9006
It is the responsibility of the user to ensure that they are using the latest revision of this document.
Doc. No.: BGS-MX-001 Version:B8
Document Title: Painting Page 32 of 42
TABLE 4
Colour Colour Number
ELECTRICAL EQUIPMENT
Indoor Electrical Panels / Switchgear Light Gray RAL 7035
Junction Boxes, Conduit Lamp Standards, Golden Yellow RAL 1004
Push Buttons
Outdoor Electrical Panels / Transformers Reseda Green RAL 6011
and Motors
Local Control Switches (LCS- Outdoor & Reseda Green RAL 6011
Indoor)
Cable Trays - See Note 3 Vermilion RAL 2002
Street light posts & lighting poles (on Light Gray RAL 7035
structures)
INSTRUMENTATION
Local Panels / Gauge Boards (Outdoor) Pale Green RAL 6021
Panels / Cabinets (Indoor) Light Grey RAL 7035
Instruments Note 2 Note 2
Instrument Junction Boxes Light Ivory RAL 1015
Cable trays, instrument boxes sunshade - See Pure White RAL 9010
Note 3
Note 1: Borouge logos and safety slogans shall be added for tanks > 30m in diameter (see pages here after for
details).
Note 2: .
Note 3: Item galvanized and painted.
Note 4: Sections of flare structure subject to a maximum radiant temperature below 200°C may optionally be
galvanized rather than painted.
Note 5: For insulated lines, this identification shall be applied to the outer surface of the insulation
It is the responsibility of the user to ensure that they are using the latest revision of this document.
Doc. No.: BGS-MX-001 Version:B8
Document Title: Painting Page 33 of 42
BS EN 1089-3 is to be followed with respect to identification colours for industrial gas cylinders. BS-
EN 1089-3 requires the colour of the cylinder shoulder to be the means of identifying the cylinder
contents.The following scheme shall be practiced for identification colours of Clean Agent Cylinders:
It is the responsibility of the user to ensure that they are using the latest revision of this document.
Doc. No.: BGS-MX-001 Version:B8
Document Title: Painting Page 34 of 42
Banding shall be located at all junctions, both sides of valves, both sides of service
It is the responsibility of the user to ensure that they are using the latest revision of this document.