The document provides steps to identify materials found in a Magnetic Chip Detector and determine appropriate actions. Step 1 is to visually identify the material using an identification tool. If unidentifiable, Step 2 is to determine if the particles are magnetic or non-magnetic. Step 3 is to analyze the material's composition. After identification, follow manuals to determine required actions based on the material and engine model.
The document provides steps to identify materials found in a Magnetic Chip Detector and determine appropriate actions. Step 1 is to visually identify the material using an identification tool. If unidentifiable, Step 2 is to determine if the particles are magnetic or non-magnetic. Step 3 is to analyze the material's composition. After identification, follow manuals to determine required actions based on the material and engine model.
The document provides steps to identify materials found in a Magnetic Chip Detector and determine appropriate actions. Step 1 is to visually identify the material using an identification tool. If unidentifiable, Step 2 is to determine if the particles are magnetic or non-magnetic. Step 3 is to analyze the material's composition. After identification, follow manuals to determine required actions based on the material and engine model.
The document provides steps to identify materials found in a Magnetic Chip Detector and determine appropriate actions. Step 1 is to visually identify the material using an identification tool. If unidentifiable, Step 2 is to determine if the particles are magnetic or non-magnetic. Step 3 is to analyze the material's composition. After identification, follow manuals to determine required actions based on the material and engine model.
When material is found in the Magnetic Chip Detectors, the following
steps should be followed to identify the material and to determine the
appropriate action.
STEP 1.
Can material be visually identified with
the MCD Debris Identification tool? Determine appropriate action per Click Here to Enter MCD Debris ID Yes the Aircraft Maintenance Manual Click to Enter pages MCD Debris Photos
If No, go to Step 2.
STEP 2.
IMMEDIATE ACTION : Non-Magnetic
Non-Magnetic Follow NDT Manual to Are particles magnetic or determine required action non-magnetic? Magnetic Magnetic STEP 3.
Perform analysis of After material has been Determine appropriate action
material to identify identified, go to CFM56 per the Aircraft Maintenance material composition. Non-Destructive Test Manual Manual, Part 9, for possible sources of material CFMI Proprietary information Exit Program Click on Engine Model