Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Nine test tube was

Methodolgy Of Solid In Liquid labelled as 1 to 9

Test tube 1,2 and 3 was Test tube 4,5 and 6 was Test tube 7,8 and 9 was
filled with distilled water filled with ethanol filled with hexane
(approximately 1/4 full) (approximately ¼ full) (approximately ¼ full)

1.0g sodium chloride was The mixture was shake vigorously for
1.0g oxalic acid is weighed
weighed and put it into test about 30 seconds.The solubility of the
and put it into test tube 2,5
tube 1,4 and 7 each solute in each test tube was observed.The
data was recorded in table 1 and 8, step 6 is repeated

1.0g paraffin is weighed


and put it into test tube 3,6
and 9, step 6 is repeated

Methodology Of Miscibility Of Liquid The relative solubility of a solute in two solvents

Water,ethanol and hexane was


added to 3 different test tubes
2 ml methylene chloride and 4 ml water
(approximately ¼ full)
was mixed

1 ml of cooking oil was added


to each of the test tubes
The relative position of each liquid was
observed by noting the volume of each
liquid.The mixture was shake for five second
and allow the liquid to sepaarate

The observation was recorded


in the table 2
2 drops of an iodine or potassium iodide
solution is addedto the test tube and the
colour of each layer and their intensities is
noted

The test tube was shake gently for 20


seconds.The liquid to separate is allowed
and the colour of each layer is noted again

You might also like