Professional Documents
Culture Documents
AMI EPKHD-ARM Datasheet
AMI EPKHD-ARM Datasheet
Model: EPKHD-ARM
The AMI Heavy-Duty Electrode Position Kit is an adjustable pressure spring-loaded measuring arm with a Solid Stainless Steel Wheel that allows
higher pressure forces on the measuring surface, altoguether with an incremental shaft encoder and a high temperature cable, is used to measure
speed and position of electrodes of Electric Arc Furnaces. Read and Analized by our DigitArc PX3™ System.
Product Specifications
Property Value
Material Al6061 T6 y SS304
Wheel Solid, SS304
Weight 12.5 Kg
Wheel Diameter 6.266”
Working Angle 35° - 60°
Installation Four screws to the floor
Rolling elements Radial Bearings
Force applied 250Kgf max, adjustable by spring
Design
Blvd. Díaz Ordaz #402, Col. Rincón de Santa María, Monterrey Nuevo León, 64650 México
AMI AUTOMATION 1
www.amiautomation.com
AMI ELECTRODE POSITION KIT
Model: EPKHD-ARM
Dimmensions
Base
Blvd. Díaz Ordaz #402, Col. Rincón de Santa María, Monterrey Nuevo León, 64650 México
AMI AUTOMATION 2
www.amiautomation.com
AMI ELECTRODE POSITION KIT
Model: EPKHD-ARM
Installation
1. Move the spring nut to the top, this will move the arm to a 2. Approach the arm to the installation site, make contact with the
more vertical position. measuring surface, then mark, drill and tap the base fixing holes to
install the base screws.
3. Install the four screws and fix the arm to the base surface. 4. Turn the nut counterclockwise to compress tje spring and adjust
the Wheel pressure until there is no slippage.
1” of compression = 400 lb
Blvd. Díaz Ordaz #402, Col. Rincón de Santa María, Monterrey Nuevo León, 64650 México
AMI AUTOMATION 3
www.amiautomation.com