Professional Documents
Culture Documents
Comparsion of RCCM & ASME
Comparsion of RCCM & ASME
MC 4121
Personnel are qualified and certified according to standard NF EN For those documents that directly reference this Article for
473. Outside Europe, certification granted by an independent the qualification of NDE personnel, the qualification shall
organization, following an equivalent standard may be used once be in accordance with their employer’s written practice
approved by the Contractor, on the condition that the applicable which must be in accordance with one of the following
regulatory requirements are complied with. documents:
2. Certification of inspectors
(1) SNT-TC-1A,3 Personnel Qualification and Certification
in Nondestructive Testing; or
Personnel responsible for visual examinations shall be chosen either (2) ANSI/ASNT CP-189,3 ASNT Standard for
from among non-destructive test operators or from among Qualification and Certification of Nondestructive Testing
personnel familiar with the manufacture or fabrication process for Personnel
items under examination.
MC 4122
Liquid penetrant All liquid penetrant examinations shall be performed in accordance Liquid penetrant examination shall be performed in
3.
examination documents with conditions specified in a series of properly identified accordance with a written procedure
documents (procedures, work sheets, instruction sheets),
MC 4200
4. Control method Not given
"The sensitivity of the products families shall be 2 at least, in
conformity with EN ISO 3452-2
When a liquid penetrant examination cannot be conducted
The sensitivity level of a product family shall be determined using within the standard temperature range of 40°F to
5.
reference block 1 as described in prEN 5713 125°F (5°C to 52°C), the temperature of the examination
shall be qualified in accordance
The assessed level always refers to the method used for type testing
6.
of the approved product family