Professional Documents
Culture Documents
Screw-In Cartridge Valves E1-VLSC-MC001-E6 Jan 2018 Complete
Screw-In Cartridge Valves E1-VLSC-MC001-E6 Jan 2018 Complete
Screw-In Cartridge Valves E1-VLSC-MC001-E6 Jan 2018 Complete
Solenoid
A Valves Introduction/ Valve Locator ............................................. Ø-4 – Ø-63
Solenoid Valves ................................................................ A-4 – A-206
Proportional Proportional valves............................................................ B-4 – A-89
B valves
Coils & Electronic Controls............................................... C-5 – A-29
Directional Controls ........................................................ D-4 – D-170
Coils & Electronic
C Controls Pressure Controls .............................................................E-4 – E-130
Motion Control Valves ...................................................... F-4 – F-140
Directional
D Controls
Check Valves...................................................................... G-4 – G-82
Pressure
E Controls
Motion
F Control Valves
Check
G Valves
H Flow
Controls
Logic
I Elements
J Housing &
Misc. Parts
Circuit
K Makers
Sandwich
L Valves
Technical
M Reference
N Appendix
Introduction/
Valve Locator
Ø
Solenoid
Flow Controls...................................................................H-4 – G-126 Valves A
Logic Elements ..................................................................... I-4 – I-28
Housing & Misc. Parts ........................................................ J-4 – J-33 Solenoid
Valves B
Circuit Makers .................................................................... K-4 – K-88
Sandwich Valves ................................................................. L-4 – K-61
Coils & Electronic
Controls C
Technical Reference ......................................................... M-4 – M-34
Appendix ........................................................................... N-4 – N-32
Directional
Controls D
Pressure
Controls E
Motion
Control Valves F
Check
Valves G
Flow H
Controls
Logic
Elements I
Housing & J
Misc. Parts
Circuit
Makers K
Sandwich
Valves L
Technical
Reference M
Appendix N
Screw-in cartridge valves (SiCVs)
Screw-in cartridge valves (SiCVs) ......................................................................................................................Ø-4
Check valves.......................................................................................................................................................Ø-31
Logic elements...................................................................................................................................................Ø-36
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-3
Screw-in cartridge valves (SiCVs)
Ø Introduction
Hydraulic integrated Global support Features and benefits • Compact and neat
circuits Eaton’s world-wide Eaton’s screw-in cartridge assemblies for economy
Hydraulic Integrated Circuits distribution and service valves provide many of space and weight
(HICs) are valve packages network is quick, reliable, and advantages over traditional • Increased ability to
containing combinations responsive to the customer’s hydraulic valves. While withstand vibration, giving
of screw-in cartridge valves in needs. Our customers can offering the same control optimum machine reliability
a manifold block. The package rest assured that no matter functions as traditional and performance
is dedicated to the hydraulic where they’re located, Eaton hydraulic valves, screw-in • Multiple mounting
control of a particular will be there with unrivaled cartridge valves are compact, configurations offers
application. HICs can be products and technical reliable, and economical. maximum design flexibility
as extensive as necessary to expertise. The concept of combining • Greater contamination
meet the most complex multiple cartridge valves tolerance
applications or as simple as Technical support
Quality products are only part in a common manifold offers • Faster cycle times
two or three cartridges in a both the mobile and industrial
basic single manifold. of Eaton’s commitment to our • Lower noise levels
customers. We also provide user substantial cost-saving
All HIC packages are designed advantages that cannot be
• Faster on-sight servicing
advisory, planning and design and troubleshooting
and manufactured services specifically geared to achieved with traditional
by Eaton to customer valving. Here are some of the • Resistance to fluid
your application and backed by contamination
specifications. Manifolds can on-time delivery. advantages of Eaton cartridge
be designed to hold the valves: • Hardened ground steel
requisite cartridges, pilot • Response times and operating parts
pistons, orifice discs, or any efficiency gains, by
other components needed for eliminating many of the
individual applications and hoses, tubes and fittings
integrated with other Eaton necessary in traditional
components. Standard cavity installations
tooling provides precision
machining of standard
• Fewer potential leakage
cartridge cavities. points than with
conventional valves ensuring
cleaner, safer application
environments
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-4 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
General information
Ø
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-5
Hydraulic integrated circuits
Ø High performance in one compact, efficient package
Customized solutions from mounted valves to, ultimately, No leaks, no lines From screw-in cartridge
a single source HIC Manifold Valve Systems. HIC packages are created valves to complete systems
Eaton is a major supplier Operating costs - reduced to meet specific circuit or SiCVs gained their initial
of Hydraulic Integrated complexity, elimination installation requirements market success and
Circuits (HIC) manifold block of leakage, and improved where two or more valves position in the agricultural
systems. Application and use serviceability - as well as are required. The valves are equipment industry in the
of HIC packages has spread initial installed cost packaged by hydraulic product late 1960s. SiCV technology
across virtually every market factors - compact size, lower suppliers, or OEMs, into either rapidly spread from the
and is a major growth area purchase cost, reduced aluminum or steel blocks traditional basic valve control
increasing at a rate 2 to customer engineering, fewer instead of using traditional functions of flow pressure and
3 times the growth rate for the component parts and a higher cast iron individual in-line direction to many specialty
rest of the hydraulics industry. level of integration - are valve bodies. This permits the valve control functions that
contributing to this trend. creation of compact, leak-free were not always practical or
Market trend forces are
fueling growth away from line valve control system packages economical in the
mounted valves to subplate while eliminating the cost traditional cast iron housing
and time to connect the configuration. From these
valves together with lines modest but demanding
and fittings. This capability beginnings in the agricultural
satisfies many application vehicle and implement
Market trends requirements where available markets, the concept of
space for hydraulic packaging two or more valves
components is limited. HIC to form a unique control
Low packages are ideally suited system and/or subsystem
HIC / SiCV for a quick and easy, low quickly spread into other
Manifold cost hydraulic circuit which cost sensitive high volume
Initial Installed Cost
High
High Operating Costs Low
The evolution of the Line mounted valves Mounted sub-plate HIC package
hic package mounted
This technology has evolved
from labor intensive, costly
line and subplate mounted
components to compact
leakfree HIC packages.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Hydraulic integrated circuits
High performance in one compact, efficient package
Ø
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-7
Aluminum and steel manifold packages
Ø with direct port stc connections
STC Hose/Connector
STC Port Male connector is inserted Latch ring is in its open Male and female are locked
into the female connector. The position which allows the male into place. As fluid pressure
male shoulder spreads the shoulder to slide past the latch is applied, the latch ring is
latch ring open. ring. wedged between the male
How to use STC shoulder and the female angle.
STC assembly action
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Solenoid valves
Valve locator
Ø
Ø
Functional symbol
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-9
Solenoid valves
Ø Valve locator
Functional symbol
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
Flow Typical
Model Cavity rating pressure Page
2 Flow Typical
Model Cavity rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-10 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Solenoid valves
Valve locator
Ø
Functional symbol
2 Flow Typical
Model Cavity rating pressure Page
Flow Typical
2 3 Model Cavity rating pressure Page
Flow Typical
Model Cavity rating pressure Page
2
Solenoid 3/2, spool L/min (USgpm) bar (psi)
SV11A/B-10-3 C-10-3 23 (6) 350 (5000) A-126
SV1A/B-12-3 C-12-3 38-42 (10-11) 210 (3000) A--
1 3 SV11A/B-12-3 C-12-3 38 (10) 350 (5000) A--
Flow Typical
2 Model Cavity rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-11
Solenoid valves
Ø Valve locator
Functional symbol
4 2 Flow Typical
Model Cavity rating pressure Page
4 2 Flow Typical
Model Cavity rating pressure Page
4 2 Flow Typical
Model Cavity rating pressure Page
2 4 Flow Typical
Model Cavity rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-12 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Solenoid valves
Valve locator
Ø
Functional symbol
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-13
Note: Proportional valve solenoid
Proportional valves coils and electronic valve drivers
Ø Valve locator/section contents
are covered in section C of
this Catalog.
Functional symbol
Typical
Model Cavity Flow rating pressure Page
2 (In)
Proportional bi-directional poppet L/min (USgpm) bar (psi)
1 (Out) Typical
Model Cavity Flow rating pressure Page
2
Proportional bi-directional poppet L/min (USgpm) bar (psi)
1 Typical
Model Cavity Flow rating pressure Page
EPV16A
2 Proportional flow control, NC, poppet L/min (USgpm) bar (psi)
1
EPV16B
1
2
Typical
Model Cavity Flow rating pressure Page
2
Proportional flow control, NC, poppet L/min (USgpm) bar (psi)
Typical
2 Model Cavity Flow rating pressure Page
1 3 Typical
Model Cavity Flow rating pressure Page
Typical
1 2 Model Cavity Flow rating pressure Page
Typical
2 4 Model Cavity Flow rating pressure Page
Proportional 4-way, 3-position flow control, L/min (USgpm) bar (psi)
COIL NO, spool
A ESV9-8 B-50
3 1 ESV9-10-E C-10-4 22 (5.8) 250 (3600) B-52
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-14 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Proportional valves
Valve locator/section contents
Ø
Functional symbol
Typical
Model Cavity Flow rating pressure Page
2 4
Proportional 4-way, 3-position flow control, L/min (USgpm) bar (psi)
NC, spool
OIL CO
B A ESV9-10-F C-10-4 22 (5.8) 250 (3600) B-52
Typical
E Model Cavity Flow rating pressure Page
Typical
2 Model Cavity Flow rating pressure Page
3 2
1
Typical
Model Cavity Flow rating pressure Page
3 2
2 Typical
Model Cavity Flow rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-15
Proportional valves
Ø Valve locator/section contents
1
Typical
2 Model Cavity Flow rating pressure Page
Typical
Model Cavity Flow rating pressure Page
Typical
1 Model Cavity Flow rating pressure Page
2 3
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-16 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Directional controls
Valve locator
Ø
Functional symbol
Flow Typical
Model Cavity rating pressure Page
3 2
Manual rotary valve L/min (USgpm) bar (psi)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-17
Directional controls
Ø Valve locator
Flow Typical
1 Model Cavity rating pressure Page
2
Manual pull valve, NC L/min (USgpm) bar (psi)
3 1 Flow Typical
Model Cavity rating pressure Page
2
Manual push valve L/min (USgpm) bar (psi)
3 1 Flow Typical
Model Cavity rating pressure Page
4 2 Manual push valve L/min (USgpm) bar (psi)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-18 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Directional controls
Valve locator
Ø
Functional symbol
Flow Typical
Model Cavity rating pressure Page
3
Pilot to shift 2/2 valve L/min (USgpm) bar (psi)
1 2 4 Flow Typical
Model Cavity rating pressure Page
2
Brake sequence L/min (USgpm) bar (psi)
3 1
Flow Typical
Model Cavity rating pressure Page
2 Brake release shuttle L/min (USgpm) bar (psi)
3 1 4
Flow Typical
Model Cavity rating pressure Page
3 Pilot to shift valve L/min (USgpm) bar (psi)
Flow Typical
Model Cavity rating pressure Page
3 Pilot to shift valve L/min (USgpm) bar (psi)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-19
Directional controls
Ø
Valve locator
Functional symbol
Flow Typical
Model Cavity rating pressure Page
3
Pilot to shift valve L/min (USgpm) bar (psi)
Flow Typical
3 Model Cavity rating pressure Page
Flow Typical
2 Model Cavity rating pressure Page
4 3 1
Flow Typical
3 Model Cavity rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-20 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Directional controls
Ø
Valve locator
Functional symbol
Flow Typical
Model Cavity rating pressure Page
3
Sequence L/min (USgpm) bar (psi)
4 2
Flow Typical
4 2 Model Cavity rating pressure Page
5 3 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-21
Pressure controls
Ø Valve locator
Functional symbol
Flow Typical
2 Model Cavity rating pressure Page
Flow Typical
2 Model Cavity rating pressure Page
Flow Typical
Model Cavity rating pressure Page
Flow Typical
2 Model Cavity Rating pressure Page
1
Flow Typical
2 Model Cavity rating pressure Page
1
Flow Typical
1 Model Cavity rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-22 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Ø
1
Flow Typical
2 Model Cavity rating pressure Page
1
Flow Typical
2 Model Cavity rating pressure Page
1
Flow Typical
2 Model Cavity rating pressure Page
1 Flow Typical
3 2 Model Cavity rating pressure Page
1
Flow Typical
1 Model Cavity rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-23
Pressure controls
Ø Valve locator
Functional symbol
Flow Typical
2 Model Cavity rating pressure Page
Flow Typical
2 Model Cavity rating pressure Page
3
Flow Typical
2 Model Cavity rating pressure Page
3
Flow Typical
2 Model Cavity rating pressure Page
3 1
Flow Typical
2 Model Cavity rating pressure Page
3 1
Flow Typical
2 Model Cavity rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-24 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Pressure controls
Valve locator
Ø
Functional symbol
Flow Typical
2 Model Cavity rating pressure Page
1
Flow Typical
2 Model Cavity rating pressure Page
3 1
Flow Typical
2 Model Cavity rating pressure Page
3 1
Flow Typical
2 Model Cavity rating pressure Page
3 1
Flow Typical
Model Cavity rating pressure Page
2
Series sequence valve, spool, unloading L/min (USgpm) bar (psi)
1UPS100 A880 150 (40) 350 (5000) E-110
1
Flow Typical
3 Model Cavity rating pressure Page
1
PUV3-10 C-10-3 4 (1) 210 (3000) E-112
2
Flow Typical
2 Model Cavity Rating Pressure Page
1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-25
Pressure controls
Ø Valve locator
Functional symbol
Flow Typical
1 Model Cavity rating pressure Page
3 2
Flow Typical
1 Model Cavity rating pressure Page
3 2
Flow Typical
1 Model Cavity rating pressure Page
3 2
Flow Typical
1(P) Model Cavity rating pressure Page
2(REG)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-26 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Motion controls
Valve locator
Ø
Functional symbol
1 Model Cavity Flow rating Typical pressure Page
V1 V2
V1 V2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-27
Motion controls
Ø Valve locatorh
Functional symbol
1 Model Cavity Flow rating Typical pressure Page
2
C1 C2
V1 V2
4 2
C1 C2 Model Cavity
Motion control valve, with brake shuttle L/min (USgpm) bar (psi) Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-28 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Motion controls
Valve locator
Ø
Functional symbol
V1 T V2
Motion control valve & lock with brake shuttle L/min (USgpm) bar (psi)
V1 B T V2
Bleed
Bleed Pilot
Drain
V V
V V1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-29
Motion controls
Ø Valve locator
Functional symbol
Cyl GP Model Cavity Flow rating Typical pressure Page
CT1 CT2
V Gauge Pilot 2
V1 V
Drain
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-30 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Check valves
Valve locator
Ø
Functional symbol
Model Cavity Flow rating Typical pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-31
Check valves
Ø Valve locator
1 4
Dual pilot checks with thermal relief L/min (USgpm) bar (psi)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-32 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Flow controls
Valve locator
Ø
Functional symbol
Flow Typical
Model Cavity rating pressure Page
Flow Typical
Model Cavity rating pressure Page
Flow Typical
Model Cavity rating pressure Page
Flow Typical
Model Cavity rating pressure Page
Flow Typical
Model Cavity rating pressure Page
2
Flow Typical
5(LS) 1 Model Cavity rating pressure Page
5(LS) 1
3 (P)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-33
Flow controls
Ø Valve locator
Functional symbol
Flow Typical
Model Cavity rating pressure Page
Flow Typical
Model Cavity rating pressure Page
1 2
Flow Typical
Model Cavity rating pressure Page
Flow Typical
Model Cavity rating pressure Page
Flow Typical
Model Cavity rating pressure Page
1 4 Flow Typical
Model Cavity rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-34 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Flow controls
Valve locator Ø
Functional symbol
Flow Typical
Model Cavity rating pressure Page
Inlet (1) Reg. (2)
Flow regulator/diverter L/min (USgpm) bar (psi)
2FPH55 <55 (14) 280 (4000) H-106
2FPH95 <95 (25) 350 (5000) H-106
2FPH195 <160 (42) 350 (5000) H-106
By-pass Drain
Flow Typical
2 Model Cavity rating pressure Page
reverse flow direction
1
Flow Typical
Model Cavity rating pressure Page
4 2
Flow divider/conbiner L/min (USgpm) bar (psi)
FDC1-16 C-16-4 <178 (47) 210 (3000) H-114
FDC11-16 C-16-4 <140 (37) 350 (5000) H-116
2CFD50 A12744 <40 (10.5) 350 (5000) H-118
2CFD200 CVB-42-04-0 <220 (58) 280 (4000) H-120
3
Flow Typical
2 3 Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
4 2
Flow divider/combiner, posi-traction L/min (USgpm) bar (psi)
FDC3-16 C-16-4 <152 (40) 210 (3000) H-124
3
Flow Typical
2 3 Model Cavity rating pressure Page
1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-35
Logic elements
Ø Valve locator
Functional symbol
Model Cavity Flow rating Typical pressure Page
1 2
1 2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-36 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Circuit maker solutions
Valve locator
Ø
In
Reg.
Flow Typical
Model Cavity rating pressure Page
In
S2 T2
Flow Typical
Model Cavity rating pressure Page
P T
S2 T2
Flow Typical
Model Cavity rating pressure Page
G T1 Pump control, single pump circulation L/min (USgpm) bar (psi)
PCC2-12 Inline 114 (30) 5-210 (3000) K-30
PCC2-16 Inline 228 (60) 10-210 (3000) K-32
P T
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-37
Circuit maker solutions
Ø Valve locator
Functional symbol
Flow Typical
G
Model Cavity rating pressure Page
Bypass
P T
P
Flow Typical
Model Cavity rating pressure Page
G T
Relief valve, solenoid actuated L/min (USgpm) bar (psi)
SRV-8 Inline 23 (6) 210 (3000) K-40
SRV-10 Inline 57 (15) 210 (3000) K-42
SRV-12 Inline 114 (30) 210 (3000) K-44
SRV-16 Inline 225 (60) 210 (3000) K-46
SRV-20 Inline 300 (80) 210 (3000) K-48
G T
Flow Typical
Model Cavity rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-38 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Circuit maker solutions
Valve locator
Ø
Functional symbol
Flow Typical
Model Cavity rating pressure Page
V C
CH
Flow Typical
Model Cavity rating pressure Page
V C
VH CH
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-39
Circuit maker solutions
Ø Valve locator
G1 G2
V1 V2
V1 D V2
G1 G2
V1 V2
P2 SYSTEM
Flow Typical
T Model Cavity rating pressure Page
P1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-40 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Circuit maker solutions
Valve locator
Ø
Functional symbol
Flow Typical
Model Cavity rating pressure Page
A B
Flow Typical
M1 M2 Model Cavity rating pressure Page
Motor mounted OCV with brake shuttle L/min (USgpm) bar (psi)
H & T Motors 60 (15) 210 (3000) K-70
2000 Motors 60 (15) 210 (3000) K-72
OMP 30 (8) 270 (4000) K-74
OMS 90 (23) 270 (4000) K-76
V1 B1 V2
Flow Typical
M1 M2 Model Cavity rating pressure Page
Motor mounted P.O. check with brake shuttle L/min (USgpm) bar (psi)
H & T Motors 60 (15) 210 (3000) K-78
2000 Motors 60 (15) 210 (3000) K-80
V1 B1 V2
Flow Typical
M1 M2 Model Cavity rating pressure Page
V1 V2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-41
Pressure control functions Caution
Ø Sandwich valves locator
Sandwich valve flow ratings
are limited by the ratings of
individual cartridges Consult
ISO 4401-03/CETOP 03 series cartridge valve literature.
P T B A
Model A321P
Relief valve RV1 10 * * A321P **/**** 00 Part No. 02 185342
P-T
Cartridge RV1-10
CartridgeData Sheet Section E
Cavity C-10-2
Model A321A
Relief valve RV1 10 * * A321A **/**** 00 Part No. 02-185340
A-T
Cartridge RV1-10
CartridgeData Sheet Section E
Cavity C-10-2
Model A321B
Relief valve RV1 10 * * A321B **/**** 00 Part No. 02-185341
B-T
Cartridge RV1-10
CartridgeData Sheet Section E
Cavity C-10-2
Model A321P
Proportional ERV1 10 * *** A321P *** * 00 Part No. 02-185342
Relief valve
Cartridge ERV1-10
P-T CartridgeData Sheet Section B
Cavity C-10-2
Model A321A
Proportional ERV1 10 * *** A321A *** * 00 Part No. 02-185340
Relief valve
Cartridge ERV1-10
A-T CartridgeData Sheet Section B
Cavity C-10-2
Model A321B
Proportional ERV1 10 * *** A321B *** * 00 Part No. 02-185341
Relief valve
Cartridge ERV1-10
B-T CartridgeData Sheet Section B
Cavity C-10-2
Model A321P
Relief valve RV5 10 * * A321P **/**** 00 Part No. 02-185342
P-T
Cartridge RV5-10
CartridgeData Sheet Section B
Cavity C-10-2
Model A321A
Relief valve RV5 10 * * A321A **/**** 00 Part No. 02-185340
A-T
Cartridge RV5-10
CartridgeData Sheet Section E
Cavity C-10-2
Model A321B
Relief valve RV5 10 * * A321B **/**** 00 Part No. 02-185341
B-T
Cartridge RV5-10
CartridgeData Sheet Section E
Cavity C-10-2
P T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-42 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Caution Pressure control functions
Sandwich valve flow ratings Ø
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
P T B A
Model A322P
Solenoid SRV 10 * 0 S A322P 35/ ** ** Part No. 02 185344
Controlled
Relief Valve Cartridge SV5-8/RV-1-10
P-T Refer to page L-20 for model code breakdown Cartridge Data Sheet Section A/E
Normally Opened Cavity C-8-2/C-10-2
Model A322P
Solenoid SRV 10 * C S A322P 35/*** ** Part No. 02-185344
Controlled
Relief Valve Cartridge SV5-8-C/
P-T Refer to page L-20 for model code breakdown RV1-10
Normally Closed Cartridge Data Sheet Section A/E
Cavity C-8-2/C-10-2
Model A312W
Dual RVS 10 * * A312W A**/****B**/**** 00 Part No. 02-185365
Relief valve
Cartridge RV1-10 qty 2
A-T, B-T Refer to page L-20 for model code breakdown Cartridge Data Sheet Section E
Cavity C-10-2 qty 2
Model A312W
Dual RV5 10 * * A312W A**/****B**/**** 00 Part No. 02-185365
Relief valve
Cartridge RV5-10 qty 2
A-T, B-T Refer to page L-20 for model code breakdown Cartridge Data Sheet Section E
Cavity C-10-2 qty 2
Model A321W
Cross Port RV3A 10 * * A321W A**/****B**/**** 00 Part No. 02-185343
Relief Valve
Cartridge RV5-10 qty 2
A-B Refer to page L-20 for model code breakdown
Cartridge Data Sheet Section E
Cavity C-10-2 qty 2
Model A316P
Sequence Valve PSV7 10 * * A316P **/**** 00 Part No. 02-185374
In to P Cartridge PSV7-10
Cartridge Data Sheet Section E
Refer to page L-21 for model code breakdown Cavity C-10-3
Model A316A
Sequence Valve PSV7 10 * * A316A **/**** 00 Part No. 02-185372
In to A Cartridge PSV7-10/
Reverse FF Refer to page L-21 for model code breakdown CV3-10
Check Cartridge Data Sheet Section E/G
Cavity C-10-3/C-10-2
P T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-43
Pressure control functions Caution
Ø Sandwich valve flow ratings
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
P T B A
Model A319A
Sequence Valve PSV7 10 * * A319A **/**** 00 Part No. 02-185377
Out of A
Reverse FF Refer to page L-21 for model code breakdown Cartridge PSV7-10/CV3-10
Check Cartridge Data Sheet Section E/G
Cavity C-10-3/C-10-2
Model A316B
Sequence Valve PSV7 10 * * A316B **/**** 00 Part No. 02-185373
In to B Cartridge PSV7-10/
Reverse FF Refer to page L-21 for model code breakdown CV3-10
Check Cartridge Data Sheet Section E/G
Cavity C-10-3/C-10-2
Model A319B
Sequence Valve PSV7 10 * * A319B **/**** 00 Part No. 02-185378
Out of B Cartridge PSV7-10/
Reverse FF Refer to page L-21 for model code breakdown CV3-10
Check Cartridge Data Sheet Section E /G
Cavity C-10-3/C-10-2
Model A326P
Reducing PRV2 10 * * A326P **/**** 00 Part No. 02-185353
Valve on (P)
Cartridge PRV2-10
Drained to T Refer to page L-21 for model code breakdown Cartridge Data Sheet Section E
Cavity C-10-3
Model A310A
Reducing on A PRV2 10 * * A310A **/**** 00 Part No. 02-185362
Drained to T Cartridge PRV2-10/
Reverse FF Check Refer to page L-21 for model code breakdown CV3-10
Cartridge Data Sheet Section E/G
Cavity C-10-3/C-10-2
P T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-44 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Caution Check & pilot check functions
Sandwich valve flow ratings Ø
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
P T B A
Pilot Operated 4CK30 * A323A *** 00 Model A323A
Check Valve Cartridge 4CK30
On A Cartridge Data Sheet Section G
Pilot from B Cavity A6610
Model A323B
Pilot Operated 4CK30 * A323B *** 00
Check Valve Cartridge 4CK30
Cartridge Data Sheet Section G
On B Cavity A6610
Pilot from A
Model A323W
Pilot Operated 4CK30 * A323W *** 00
Check Valve Cartridge 4CK30
Cartridge Data Sheet Section G
On A & B Cavity A6610
Cross Piloted
Model A307P
Check CV3 8 * P A307P *** 00 Part No. 02-185356
Valve
Cartridge CV3-8
On P Cartridge Data Sheet Section G
Cavity C-8-2
Model A324P
Check CV3 10 * P A324P *** 00 Part No. 02-185350
Valve
Cartridge CV3-10
On P Cartridge Data Sheet Section G
Cavity C-10-2
Model A308T
Check CV3 10 * P A308T *** 00 Part No. 02-185360
Valve Cartridge CV3-10
On T Cartridge Data Sheet Section G
Cavity C-10-2
Model A307A
Check Valve CV3 8 * P A307A *** 00 Part No. 02-185354
On A
Cartridge CV3-8
Free Flow Cartridge Data Sheet Section G
Out Cavity C-8-2
Model A314A
Check Valve CV3 10 * P A314A *** 00 Part No. 02-185367
On A
Cartridge CV3-10
Free Flow Cartridge Data Sheet Section G
Out Cavity C-10-2
P T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-45
Check and flow control functions Caution
Ø Sandwich valve flow ratings
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
P T B A Model A307B
Part No. 02-185355
Check Valve CV3 8 * P A307B *** 00
On B Cartridge CV3-8
Free Flow Cartridge Data Sheet Section G
Out Cavity C-8-2
Model A314B
Check Valve CV3 10 * P A314B *** 00 Part No. 02-185368
On B Cartridge CV3-10
Free Flow Cartridge Data Sheet Section G
Out Cavity C-10-2
Model A320T
Check Valve CV3 8 * P A320T *** 00 Part No. 02-185379
On T Cartridge CV3-8 qty 2
On A & B Cartridge Data Sheet Section G
Cavity C-8-2 qty 2
Model A317T
Check Valve CV10 10 * P A317P *** 00 Part No. 02-185375
on T
Cartridge CV3-10 qty 2
to A & B Cartridge Data Sheet Section G
Cavity C-10-2 qty 2
Model A321P
Anti-Caviation CV16 10 * P A321P *** 00 Part No. 02-185342
Check P-T
Cartridge CV16-10-P-O-5
Cartridge Data Sheet Section G
Cavity C-10-2
Model A309W
Shuttle Valve DSV2 8 * B A309W 00 Part No. 02-185361
A&B
Cartridge DSV2-8-B-O
Output Cartridge Data Sheet Section G
External Cavity C-8-3
Model A324P
Flow NV1 10 * * A324P 00 Part No. 02-185350
Control Cartridge NV1-10
Meter in P Cartridge Data Sheet Section H
Cavity C-10-2
Model A324A
Flow Control FCV7 10 * * A324A FF 00 Part No. 02-185348
& Check Cartridge FCV7-10
Meter in A Cartridge Data Sheet Section H
Cavity C-10-2
Model A314A
Flow Control FCV7 10 * * A314A FF 00 Part No. 02-185367
& Check Cartridge FCV7-10
Meter Out A Cartridge Data Sheet Section H
Cavity C-10-2
Model A324B
Flow Control FCV7 10 * * A324B FF 00 Part No. 02-185349
& Check Cartridge FCV7-10
Meter in B Cartridge Data Sheet Section H
Cavity C-10-2
P T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-46 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Caution Flow control functions
Sandwich valve flow ratings Ø
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
P T B A
Flow Control FCV7 10 * * A314B FF 00 Model A314B
Part No. 02-185368
& Check
Meter Out B Cartridge FCV7-10
Cartridge Data Sheet Section H
Cavity C-10-2
Model A324W
Flow Control FCV7 10 * * A324W FF 00 Part No. 02-185351
& Check
Cartridge FCV7-10 qty 2
Meter In Refer to page L-22 for model code breakdown
Cartridge Data Sheet Section H
A&B Cavity C-10-2 qty 2
Model A314W
Flow Control FCV7 10 * * A314W FF 00 Part No. 02-185369
& Check
Meter Out Refer to page L-22 for model code breakdown
Cartridge FCV7-10 qty 2
Cartridge Data Sheet Section H
A&B Cavity C-8-2 qty 2
Model A324P
Flow Regulator FAR1 10 * * A324P *** 00 Part No. 02-185350
Pressure
Cartridge FAR1-10
Compensated and
Cartridge Data Sheet Section H
Check Meter in P Cavity C-10-2
Model A314A
Flow Regulator FAR1 10 * * A314A *** 00 Part No. 02-185367
Pressure
Compensated and Cartridge FAR1-10
Cartridge Data Sheet Section H
Check Meter in A Cavity C-10-2
P T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-47
Flow control & solenoid control functions Caution
Ø Sandwich valve flow ratings
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
P T B A
Model A324W
Flow Regulator FAR1 10 * * A324W A***B*** 00 Part No. 02-185351
Pressure
Compensated and Cartridge FAR1-10 qty 2
Check Meter Out Cartridge Data Sheet Section H
Cavity C-10-2 qty 2
A&B
Model A313P
Proportional Flow EPV 10 * * A313P *** * * 00 Part No. 02-185366
Control Pressure Cartridge EPV-10,
Compensation Refer to page L-23 for model code breakdown DPS2-10
on P Cartridge Data Sheet Section I & B
Cavity C-10-2/C-10-3S
Model A325P
Solenoid 2 Way SV3 10 * C A325P *** * 00 Part No. 02-185352
Poppet Type Cartridge SV3-10-C
(P-T), N/C Cartridge Data Sheet Section A
Cavity C-10-2
Model A325P
Solenoid 2 Way SV3 10 * O A325P *** * 00 Part No. 02-185352
Poppet Type
Cartridge SV3-10-0
(P-T), N/O Cartridge Data Sheet Section A
Cavity C-10-2
Model A325P
Solenoid 2 Way SV4 10 * C A325P *** * 00 Part No. 02-185352
Spool type Cartridge SV4-10-C
(P-T), N/C Cartridge Data Sheet Section A
Cavity C-10-2
Model A325P
Solenoid 2 Way SV4 10 * O A325P *** * 00 Part No. 02-185352
Spool Type Cartridge SV4-10-0
(P-T), N/O Cartridge Data Sheet Section A
Cavity C-10-2
Model A324A
Solenoid 2 Way SV3 10 * C A324A *** * 00 Part No. 02-185348
Poppet Type Cartridge SV3-10-C
Blocked on A Cartridge Data Sheet Section A
Normally Closed Cavity C-10-2
P T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-48 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Caution Solenoid control functions
Sandwich valve flow ratings Ø
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
P T B A
Model A324A
Poppet Type SV3 10 * O A324A *** * 00 Part No. 02-185348
Blocked on A
Normally Open Cartridge SV3-10-O
Cartridge Data Sheet Section A
Cavity C-10-2
Model A324A
Spool Type SV4 10 * C A324A *** * 00 Part No. 02-185348
Blocked on A
Cartridge SV4-10-C
Normally Closed Cartridge Data Sheet Section A
Cavity C-10-2
Model A324A
Spool Type SV4 10 * O A324A *** * 00 Part No. 02-185348
Blocked on A
Normally Open Cartridge SV4-10-O
Cartridge Data Sheet Section A
Cavity C-10-2
Model A324B
Poppet Type SV3 10 * C A324B *** * 00 Part No. 02-185349
Blocked on B
Normally Closed Cartridge SVC3-10-C
Cartridge Data Sheet Section A
Cavity C-10-2
Model A324B
Poppet Type SV3 10 * O A324B *** * 00 Part No. 02-185349
Blocked on B
Normally Open Cartridge SV3-10-C
Cartridge Data Sheet Section A
Cavity C-10-2
Model A324B
Spool Type SV4 10 * C A324B *** * 00 Part No. 02-185349
Blocked on B
Cartridge SV4-10-C
Normally Closed Cartridge Data Sheet Section A
Cavity C-10-2
Model A324B
Spool Type SV4 10 * O A324B *** * 00 Part No. 02-185349
Blocked on B Cartridge SV4-10-O
Normally Open Cartridge Data Sheet Section A
Cavity C-10-2
Model A324W
Poppet Type SV3 10 * C A324W *** * 00 Part No. 02-185351
Blocked on A & B Cartridge SV3-10-C qty 2
Normally Closed Cartridge Data Sheet Section A
Cavity C-10-2 qty 2
Model A324W
Poppet Type SV3 10 * O A324W *** * 00 Part No. 02-185351
Blocked on A & B Cartridge SV3-10-O qty 2
Normally Open Cartridge Data Sheet Section A
Cavity C-10-2 qty 2
P T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-49
Solenoid control functions Caution
Ø Sandwich valve flow ratings
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
P T B A
Spool Type SV4 10 * C A324W *** * 00 Model A324W
Blocked On Part No. 02-185351
A&B Cartridge SV4-10-C qty 2
Normally Closed Cartridge Data Sheet Section A
Cavity C-10-2 qty 2
Model A324W
Spool Type SV4 10 * O A324W *** * 00 Part No. 02-185351
Blocked on
Cartridge SV4-10-0 qty 2
A&B Cartridge Data Sheet Section A
Normally Open Cavity C-10-2 qty 2
Model A314A
Poppet Type SV3 10 * C A314A *** * 00 Part No. 02-185367
Load Holding
Cartridge SV3-10-C
On A Cartridge Data Sheet Section A
Normally Closed Cavity C-10-2
Model A314A
Poppet Type SV3 10 * O A314A *** * 00 Part No. 02-185367
Load Holding Cartridge SV3-10-O
on A Cartridge Data Sheet Section A
Normally Open Cavity C-10-2
Model A314B
Poppet Type SV3 10 * C A314B *** * 00 Part No. 02-185368
Load Holding
on B Cartridge SV3-10-C
Cartridge Data Sheet Section A
Normally Closed Cavity C-10-2
Model A314B
Poppet Type SV3 10 * O A314B *** * 00 Part No. 02-185368
Load Holding
Cartridge SV3-10-O
on B Cartridge Data Sheet Section A
Normally Open Cavity C-10-2
Model A314W
Poppet Type SV3 10 * C A314W *** * 00 Part No. 02-185369
Load Holding
Cartridge SV3-10-C qty 2
on A & B Cartridge Data Sheet Section A
Normally Closed Cavity C-10-2 qty 2
Model A314W
Poppet Type SV3 10 * O A314W *** * 00 Part No. 02-185369
Load Holding
on A & B Cartridge SV3-10-O qty 2
Cartridge Data Sheet Section A
Normally Open Cavity C-10-2 qty 2
P T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-50 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Caution Solenoid control functions
Sandwich valve flow ratings Ø
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
P T B A
Poppet Type SBV11 10 * C A314A *** * 00 Model A314A
Bi-Directional Part No. 02-185367
Load Holding on A Cartridge SBV11-10-C
Normally Closed Cartridge Data Sheet Section A
Cavity C-10-2
Model A314A
Poppet Type SBV11 10 * O A314A *** * 00 Part No. 02-185367
Bi-Directional
Cartridge SBV11-10-O
Load Holding on A Cartridge Data Sheet Section A
Normally Open Cavity C-10-2
Model A314B
Poppet Type SBV11 10 * C A314B *** * 00 Part No. 02-185368
Bi-Directional
Load Holding on B Cartridge SBV11-10-C
Cartridge Data Sheet Section A
Normally Closed Cavity C-10-2
Model A314B
Poppet Type SBV11 10 * O A314B *** * 00 Part No. 02-185368
Bi-Directional Cartridge SBV11-10-O
Load Holding on B Cartridge Data Sheet Section A
Normally Open Cavity C-10-2
Model A314W
Poppet Type SBV11 10 * C A314W *** * 00 Part No. 02-185369
Bi-Directional
Load Holding on A Cartridge SBV11-10-C qty 2
Cartridge Data Sheet Section A
& B Normally Closed Cavity C-10-2 qty 2
Model A314W
Poppet Type SBV11 10 * O A314W *** * 00 Part No. 02-185369
Bi-Directional
Cartridge SBV11-10-O qty 2
Load Holding on A Cartridge Data Sheet Section A
& B Normally Open Cavity C-10-2 qty 2
P T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-51
Solenoid control functions Caution
Ø Sandwich valve flow ratings
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
P T B A Model A315A
Part No. 02-185370
Poppet Type SV3 10 * C A315A *** * 00
Unload A - T Cartridge SV3-10-C
Normally Closed Cartridge Data Sheet Section A
Cavity C-10-2
Model A315A
Poppet Type SV3 10 * O A315A *** * 00 Part No. 02-185370
Unload A - T
Normally Open Cartridge SV3-10-O
Cartridge Data Sheet Section A
Cavity C-10-2
Model A315A
Spool Type SV4 10 * C A315A *** * 00 Part No. 02-185370
Unload A - T
Normally Closed Cartridge SV4-10-C
Cartridge Data Sheet Section A
Cavity C-10-2
Model A315A
Spool Type SV4 10 * O A315A *** * 00 Part No. 02-185370
Unload A - T
Normally Open Cartridge SV4-10-O
Cartridge Data Sheet Section A
Cavity C-10-2
Model A315B
Poppet Type SV3 10 * C A315B *** * 00 Part No. 02-185371
Unload B - T Cartridge SV3-10-C
Normally Closed Cartridge Data Sheet Section A
Cavity C-10-2
Model A315B
Poppet Type SV3 10 * O A315B *** * 00 Part No. 02-185371
Unload B - T Cartridge SV3-10-O
Normally Open Cartridge Data Sheet Section A
Cavity C-10-2
Model A315B
Poppet Type SV4 10 * C A315B *** * 00 Part No. 02-185371
Unload B - T Cartridge SV4-10-C
Normally Closed Cartridge Data Sheet Section A
Cavity C-10-2
P T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-52 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Caution Solenoid control functions
Sandwich valve flow ratings Ø
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
P T B A
Model A315B
2 Way SV4 10 * 0 A315B *** * 00 Part No. 02-185371
Spool Type
Unload B - T Cartridge SV4-10-O
Normally Open Cartridge Data Sheet Section A
Cavity C-10-2
Model A317T
2 Way SV3 10 * C A317T *** * 00 Part No. 02-185375
Poppet Type Cartridge SV3-10-C qty 2
Unload A & B - T Cartridge Data Sheet Section A
Normally Closed Cavity C-10-2 qty 2
Model A317T
2 Way SV3 10 * O A317T *** * 00 Part No. 02-185375
Poppet Type
Cartridge SV3-10-O qty 2
Unload A & B - T Cartridge Data Sheet Section A
Normally Open Cavity C-10-2 qty 2
Model A317T
2 Way SV4 10 * C A317T *** * 00 Part No. 02-185375
Spool Type Cartridge SV4-10-C qty 2
Unload A & B - T Cartridge Data Sheet Section A
Normally Closed Cavity C-10-2 qty 2
Model A317T
2 Way SV4 10 * O A317T *** * 00 Part No. 02-185375
Spool Type Cartridge SV4-10-O qty 2
Unload A & B - T Cartridge Data Sheet Section A
Normally Open Cavity C-10-2 qty 2
Model A318W
Poppet Type SBV11 10 * C A318W *** * 00 Part No. 02-185376
Bi-Directional
Cartridge SBV11-10-C
Blocked A - B & B - A Cartridge Data Sheet Section A
Normally Closed Cavity C-10-2
Model A318W
Poppet Type SBV11 10 * O A318W *** * 00 Part No. 02-185376
Bi-Directional
Cartridge SBV11-10-O
Blocked A - B & B - A Cartridge Data Sheet Section A
Normally Open Cavity C-10-2
P T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-53
Solenoid control & load control functions Caution
Ø Sandwich valve flow ratings
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
P T B A
Model A318W
Solenoid Valve SV4 10 * C A318W *** * 00 Part No. 02-185376
Spool Type Blocked
A to B & B to A Cartridge SV4-10-C
Cartridge Data Sheet Section A
Normally Closed Cavity C-10-2
Model A318W
Solenoid Valve SV4 10 * O A318W *** * 00 Part No. 02-185376
Spool Type Blocked
A to B & B to A Cartridge SV4-10-O
Cartridge Data Sheet Section A
Normally Open Cavity C-10-2
Model A326P
Solenoid 3-Way SV1 10 * 3 A326P *** * 00 Part No. 02-185353
Selector on P
Cartridge SV1-10-3
Cartridge Data Sheet Section A
Cavity C-10-3
Model A323A
Counterbalance 1CE30- * A323A-** * * Cartridge 1CE30
Valve on A Cartridge Data Sheet Section F
Pilot from B Cavity A6610
Model A323B
Counterbalance 1CE30- * A323B-** * *
Valve on B Cartridge 1CE30
Pilot from A Cartridge Data Sheet Section F
Cavity A6610
P T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-54 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Note: O-Rings to be ordered
Caution Spacer/blanking/linking plates
Sandwich valve flow ratings separately.
Ø
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
Function Functional symbol Part number
P T B A
P T B A
LinkingPlate 02-185275
P to A with Buna N O-RingKit 02-184951
B & T Blocked VitonO-RingKit 02-185282
P T B A
LinkingPlate 02-185276
P to A & Buna N O-RingKit 02-184951
B to T VitonO-RingKit 02-185282
P T B A
LinkingPlate 02-185277
P to B & Buna N O-RingKit 02-184951
A to T VitonO-RingKit 02-185282
P T B A
LinkingPlate 02-185278
P to T with Buna N O-RingKit 02-184951
A & B Blocked VitonO-RingKit 02-185282
P T B A
LinkingPlate 02-185279
A to B with Buna N O-RingKit 02-184951
P & T Blocked VitonO-RingKit 02-185282
P T B A
LinkingPlate 02-185280
P to B with Buna N O-RingKit 02-184951
A & T Blocked VitonO-RingKit 02-185282
P T B A
LinkingPlate 02-185281
P to A & B with Buna N O-RingKit 02-184951
T Blocked VitonO-RingKit 02-185282
P T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-55
Pressure control functions Caution
Ø Sandwich valves
Sandwich valve flow ratings
are limited by the ratings of
ISO 05/DO5/NG 10/CETOP5 series individual cartridges. Consult
cartridge valve literature.
P T T B A
Relief valve Model A521P
P-T RV1-12**A521P**/****00 Part No. 6021302-001
Cartridge RV1-12
Cartridge data sheet Section E
Cavity C-12-2
Cartridge RV1-12
Cartridge data sheet Section E
Cavity C-12-2
Cartridge RV1-12
Cartridge data sheet Section E
Cavity C-12-2
Cartridge RV11-12
Cartridge data sheet Section E
Cavity C-12-2
Cartridge RV11-12
Cartridge data sheet Section E
Cavity C-12-2
Cartridge RV11-12
Cartridge data sheet Section E
Cavity C-12-2
P T T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-56 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Pressure control functions
Ø
Sandwich valves
ISO 05/DO5/NG 10/CETOP5 series
P T T B A
Dual RV11-12**A512W A**/**B**/** Model A512W
Relief Valve Part No. 6021184-001
A-T, B-T
Cartridge RV11-12 [qty2]
Cartridge data sheet Section E
Cavity C-12-2 [qty2]
P T T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-57
Check functions Caution
Ø Sandwich valves
Sandwich valve flow ratings
are limited by the ratings of
ISO 05/DO5/NG 10/CETOP5 series individual cartridges. Consult
cartridge valve literature.
P T T B A
Check Valve CV11-12*P A524P***00 Model A524P
on P Part No. 6021186-001
Cartridge CV11-12
Cartridge data sheet Section G
Cavity C-12-2
Cartridge 4CK90
Cartridge data sheet Section G
Cavity A12336
P T T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-58 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Flow control functions
Ø
Sandwich valves
ISO 05/DO5/NG 10/CETOP5 series
P T T B A
Flow Regulator FAR1-12** A524P ***00 Model A524P
Pressure Part No. 6021186-001
Compensated
and Check Cartridge FAR1-12
Meter in P Cartridge data sheet Section H
Cavity C-12-2
P T T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-59
Solenoid control functions Caution
Ø Sandwich valves
Sandwich valve flow ratings
are limited by the ratings of
ISO 05/DO5/NG 10/CETOP5 series individual cartridges. Consult
cartridge valve literature.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-60 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Caution Solenoid control functions
Sandwich valve flow ratings Ø
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-61
Load control functions Caution
Ø Sandwich valve flow ratings
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
P T T B A
Model A523A
Overcenter in A 1CE90 * A523AA 20S/*B20S/** ** Part No. 6021282-001
Pilot from B Cartridge 1CE90
Cartridge Data Sheet Section F
Cavity A12336
P T T B A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ø-62 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Note: O-Rings to be ordered
Caution Blanking and linking plates
Sandwich valve flow ratings separately.
Ø
are limited by the ratings of
individual cartridges. Consult
cartridge valve literature.
Function Functional symbol Part number
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com Ø-63
- Additional products, product lines, and services offered by Eaton -
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Solenoid valves
Poppet and Spool type solenoid actuated valves for applications
up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Solenoid valves
SOLENOID VALVES ..................................................A-4 SV3-8-O/OP/OS - SOLENOID VALVE ...................A-72
A-2 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV4M-12-3P - SOLENOID VALVE .......................A-138 SV5M-12-4 - SOLENOID VALVE ..........................A-178
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E3—January 2018 www.eaton.com A-3
Solenoid valves
Section contents/valve locator
A Functional symbol
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
A-4 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
Solenoid valves
Valve locator
Functional symbol A
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
1 Flow Typical
Model Cavity rating pressure Page
2 Flow Typical
Model Cavity rating pressure Page
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-5
Solenoid valves
Valve locator
A Functional symbol
2 Flow Typical
Model Cavity rating pressure Page
Flow Typical
2 3 Model Cavity rating pressure Page
Flow Typical
Model Cavity rating pressure Page
2
Solenoid 3/2, spool L/min (USgpm) bar (psi)
SV11A/B-10-3 C-10-3 23 (6) 350 (5000) A-126
SV1A/B-12-3 C-12-3 38-42 (10-11) 210 (3000) A--
1 3 SV11A/B-12-3 C-12-3 38 (10) 350 (5000) A--
Flow Typical
2 Model Cavity rating pressure Page
A-6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
Solenoid valves
Valve locator
Functional symbol A
4 2 Flow Typical
Model Cavity rating pressure Page
4 2 Flow Typical
Model Cavity rating pressure Page
4 2 Flow Typical
Model Cavity rating pressure Page
2 4 Flow Typical
Model Cavity rating pressure Page
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-7
Solenoid valves
Valve locator
A Functional symbol
A-8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
Solenoid valves
Section overview
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-9
Solenoid valves
Coils
A Coil features
and benefits
Protection of internally
rectified coils
The solenoid operated • Variety of voltages and The rectifiers used in these components. A single
directional valves in this terminations coils may require protection suppressor will normally
catalog are offered with a • Coils offer a one-piece from high voltage surges protect all of the rectified
choice of standard voltages weather-proof encapsulated in some electrical circuits components in the circuit, as
and several types of electrical design, eliminating the need containing highly inductive shown in the surge suppressor
connections. For other coil for extra seals or capacitive components, circuit diagram below.
ratings and connections, • AC voltage coils are internally These include certain types of
consult your Eaton full-wave rectified for 50 to motors, solenoids, relays, and
representative. 60 cycle (Hz) applications transformers.
Standard AC coils are internally Protection is simple and
rectified to supply them with An arc suppression diode inexpensive. It consists of
DC current, therefore they molded into the coil is installing a commercially
have no “inrush” current value. available as a standard option available voltage surge
on DC coils. Also available, suppressor like the General
• Coils are rated for are explosion-proof coils
continuous duty Electric MOV varistor
and cartridges that are CSA V130LA20A for 115 volts
• Coils are interchangeable approved and recognized AC or the V250LA20A for
for serviceability by the US Underwriters 230 volts AC, across the AC
Laboratories. line supplying the rectified
Rectified components
Caution Warning
Coils may be hot to touch Application of these products
if used in continuous beyond published performance
applications. specifications may cause valve
malfunction which may result in
Warning personal injury and/or damage
Maintain in 5-8 Nm (4-6 ft lbs) to the machine.
maximum torque on valve tube
nut. Overtightening may cause
valve or coil failure.
A-10 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
- Additional products, product lines, and services offered by Eaton - A
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-11
SV5-8-C/CM - Solenoid valve
Poppet type, normally closed solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve blocks flow from port energized the pilot poppet is parts. Lapped seat for low
2 to 1 and free flow is allowed pulled off the seat allowing the leakage. IP69K Tough coil
2 from port 1 to 2. valve to open from port 2 to compatibility. Continuously
1. in the reverse direction the rated. Compact design with
flow is restricted by the pilot low pressure drop.
orifice.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage less than 5 drops/min @ 210 bar (3000 psi)
Coil duty Continuous from 85% to 110% of nominal voltage
Response times (100% rated voltage and flow) Energize: 18 ms
De-Energize: 46 ms
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,28 kg (0.62 lbs)
2 Seal kit 02-165875 (Buna-N), 02-165877 (Viton®)
Viton is a registered trademark of E.I. DuPont
150
valve.
8
100
A
50 4
B
0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-12 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV5-8-C/CM - Solenoid valve
Poppet type, normally closed solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
50.8
(2.00)
Ø 31,7
(1.25)
15.5 19.1
(0.61) (0.75)
19,1 38.1
(0.75) (1.50) 2
hex 50.8 2X 7.1
(2.00) (0.28)
50.8
(2.00) 1
0.750” Warning
27,6 - 16 Thd.
Maintain 5-8 Nm (4-6 ft lbs) maximum
(1.08) 2 torque on valve tube nut.
Ø 12,6 Over tightening may cause valve failure.
1 (0.500)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-13
SV15-8-C/CM - Solenoid valve
Poppet type, normally closed solenoid valve
37 L/min (10 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve blocks flow from port energized the pilot poppet is parts. Lapped seat for low
2 to 1 and free flow is allowed pulled off the seat allowing the leakage. IP69K Tough coil
2 from port 1 to 2. valve to open from port 2 to 1. compatibility. Continuously
in the reverse direction the rated. Compact design with
flow is restricted by the pilot low pressure drop. 350 bar
orifice. working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 37 L/min (10 USgpm)
Internal leakage, port 2 to port 1 5 drops/min, max @ 210 bar (3000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,11 kg (0.25 lbs)
Seal kit 02-165875 (Buna-N), 02-165877 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
dump valve.
Pressure Drop - psi
200 12
150
8
A
100
B 4
50
0 0
0 2 4 6 8 10
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 1 to port 2
B - Port 2 to port 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-14 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV15-8-C/CM - Solenoid valves
Poppet type, normally closed solenoid valve
37 L/min (10 USgpm) • 350 bar (5000 psi)
(DC only)
50.8
(2.00)
Ø 31,7
(1.25)
15.5 19.1
(0.61) (0.75)
19,1 38.1
(0.75) (1.50) 2
50.8 hex 50.8 2X 7.1
(2.00) (0.28)
(2.00)
1
0.750”
Warning
27,6 - 16 Thd. Maintain 5-8 Nm (4-6 ft lbs) maximum torque on valve tube nut.
(1.08) 2 Over tightening may cause valve failure.
Ø 12,6
1 (0.500)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-15
SBV2-8-C - Solenoid Bi-directional valve
Bi-directional, normally closed solenoid valve (low flow version)
1 L/min (0.25 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve is blocked in both energized the poppet is parts. IP69K Tough coil
directions. released from the seat compatibility. Continuously
2 allowing flow in both rated. Compact design with
directions. low pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 1 L/min (0.25 USgpm)
Internal leakage, port 1 to port 2 and port 2 to port 1 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Weight cartridge only 0,120 kg (0.26 lbs)
Seal kit 02-160777 (Buna-N), 02-160778 (Viton®)
Viton is a registered trademark of E.I. DuPont
30
400
300 20
200
10
100
0
.1 .2 .3 .4 .5
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-16 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SBV2-8-C - Solenoid Bi-directional valve
Bi-directional, normally closed solenoid valve (low flow version)
1 L/min (0.25 USgpm) • 210 bar (3000 psi)
26,0
(1.02)
50.8
(2.00)
Ø 31,7
(1.25)
19.1
19,1 15.5
(0.75)
(0.75) (0.61)
38.1
hex (1.50) 2
50.8 2X 7.1
(2.00) (0.28)
1
50.8
(2.00)
3.4 44.0 (1.73)
(0.13)
50.8 (2.00)
Warning Warning
Maintain 5-8 Nm (4-6 ft lbs) Aluminum housings can be
22,2 maximum torque on valve used for pressures up to 210
27,7 (0.87) tube nut. bar (3000 psi). Steel housings
hex 0.750”
(1.09) must be used for operating
- 16 Thd. Over tightening may cause
2 valve failure. pressures above 210 bar
Ø 12,62 (3000 psi).
1 (0.497)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-17
SBV12-8-C/CM - Solenoid Bi-directional valve
Bi-directional, normally closed solenoid valve (low flow version)
1 L/min (0.25 USgpm) • 350 bar (5000 psi)
1
A Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve is blocked in both energized the poppet is parts. IP69K Tough coil
directions. released from the seat compatibility. Continuously
2 allowing flow in both rated. Compact design with
directions. low pressure drop. 350bar
working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 1 L/min (0.25 USgpm)
Internal leakage, port 1 to port 2 and port 2 to port 1 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Weight cartridge only 0,120 kg (0.26 lbs)
Seal kit 02-160777 (Buna-N), 02-160778 (Viton®)
Viton is a registered trademark of E.I. DuPont
500
Pressure Drop - bar
Pressure Drop - psi
30
400
300 20
200
10
100
0
.1 .2 .3 .4 .5
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-18 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SBV12-8-C/CM - Solenoid Bi-directional valve
Bi-directional, normally closed solenoid valve (low flow version)
1 L/min (0.25 USgpm) • 350 bar (5000 psi)
50.8
(2.00)
Ø 31,7
(1.25)
19,1 15.5 19.1
(0.61) (0.75)
(0.75) 38.1
hex (1.50) 2
50.8 2X 7.1
50.8 (2.00) (0.28)
(2.00)
1
Warning
Warning
22,2 Aluminum housings can be
27,7 Maintain 5-8 Nm (4-6 ft lbs) used for pressures up to 210
(0.87)
(1.09) hex 0.750” maximum torque on valve bar (3000 psi). Steel housings
2 - 16 Thd. tube nut. must be used for operating
Ø 12,62 Over tightening may cause pressures above 210 bar
1 (0.497) valve failure. (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-19
S217A - Directional control valve
Bi-directional, normally closed poppet solenoid valve
Up to 10 L/min (2.6 USgpm) • Up to 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position • Very low leakage • Various coil terminals
the valve is blocked in both poppet design. and voltages.
directions. When the solenoid • Standard valve bodies and • Coil interchangeability with
2 is energized the poppet is common cavities. valves of same series.
pushed off the seat allowing
• One-piece encapsulated • Manual override, seal
flow in both directions.
coil with minimal variations and other
amperage draw. options available.
Sectional view
• Oil immersed • Sealed coil arrangement
armature solenoid. to protect stem
from corrosion.
Performance data
2900 200
435 30
Pressure - psi
Pressure - psi
Pressure - bar
Pressure - bar
1-2
2175 150
2-1
290 20 2-1
1450 100
1-2
145 10
725 50
0 0 0 0
0 1.3 2.6 3.9 5.2 6.5 7.8 0 1.3 2.6 3.9 5.3
Flow - US gpm Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-20 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
S217A - Directional control valve
Bi-directional, normally closed poppet solenoid valve
Up to 10 L/min (2.6 USgpm) • Up to 210 bar (3000 psi)
Dimensions
mm (inch)
48.00 50.00
(1.89) (1.97)
23.50 36.00
(0.93) (1.42)
2 holes Ø6.8
(0.27) thro’
59.00 38.50
(2.32) (1.51) 2 22.00 12.80
(0.50) 50.80
(0.87) (2.00)
1 6.00
(0.24)
15.90
24.00 A/F 8.25 16.00 (0.62)
(0.63) 31.80
27.30 3/4”-16- (0.32) 6.00 (1.25)
(1.07) (0.24)
UNF-2A 2 19.00 (0.75)
Ø12.60 (0.50) 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-21
S519 - Directional control valve
Bi-directional, normally closed poppet solenoid valve
Up to 12 L/min (3 USgpm) • Up to 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position • Very low leakage poppet • Various coil terminals and
the valve is blocked in both design. voltages.
directions. When the solenoid • Standard valve bodies and • Coil interchangeability with
2 is energized the poppet is common cavities. valves of same series.
pushed off the seat allowing
• One-piece encapsulated • Manual override, seal
flow in both directions.
coil with minimal amperage variations and other options
draw. available.
Sectional view
• Oil immersed armature • Sealed coil arrangement
solenoid. to protect stem from
corrosion.
Performance data
2900 200
435 30
Pressure - psi
Pressure - psi
Pressure - bar
Pressure - bar
1-2
2175 150
2-1
290 20 2-1
1450 100
1-2
145 10
725 50
0 0 0 0
0 1.3 2.6 3.9 5.2 6.5 7.8 0 1.3 2.6 3.9 5.3
Flow - US gpm Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-22 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
S519 - Directional control valve
Bi-directional, normally closed poppet solenoid valve
Up to 12 L/min (3 USgpm) • Up to 210 bar (3000 psi)
Dimensions
mm (inch)
49.00
1.93
22.25 35.50 50.80
0.88 1.40 2.000
70.30
2.77 50.00
1.97
18.50
2 0.728
38.10
7.00 1.500 50.80
0.276 2.000
27.00 A/F
1
7.70
0.30
32.20 16.00
1.27 19.00 0.630
7/8"-14 -UNF-2A 0.748
3.30 31.80
0.130 1.252
41.40
15.80 1.630
0.62
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-23
SBV11-8-C/CM - Solenoid Bi-directional valve
Bi-directional, normally closed solenoid valve
60 L/min (15 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position A series of internal check Hardened and ground working
the valve is blocked in both valves allows full flow in both parts. Lapped seat for low
directions. When the solenoid directions. leakage. IP69K Tough coil
2 is energized the pilot poppet compatibility. Continuously
is released from the seat rated. Compact design with
allowing the main poppet to low pressure drop. 350 bar
open. working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 60 L/min (15 USgpm)
Internal leakage, port 1 to port 2 & port 2 to port 1 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-2
All general purpose hydraulic fluids such as:
Fluids MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Weight cartridge only 0,12 kg (0.26 lbs)
Seal kit 02-160777 (Buna-N), 02-160778 (Viton®)
Viton is a registered trademark of E.I. DuPont
Description
This is a 2-way 2-position, high Pressure drop
pressure bi-directional, pilot Cartridge only
operated, normally closed
poppet type screw in cartridge
Flow - L/min (21,8 cSt oil @ 49°C)
valve. The valve is ideal for
isolating and holding actuators 0 8 16 24 32 40 48 56
300 20
in position.
250
Pressure Drop - bar
Pressure Drop - psi
16
200
A 12
150
8
100
B
50 4
0 0
1 3 5 7 9 11 13 15
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 1 to port 2
B - Port 2 to port 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-24 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SBV11-8-C/CM - Solenoid Bi-directional valve
Bi-directional, normally closed solenoid valve
60 L/min (15 USgpm) • 350 bar (5000 psi)
(DC only)
See section J for housing details.
4 Style
10 Coil series
C - Normally closed
8 Voltage rating P - 8 series, 23 W
For coil part numbers and dimensions
00 - No coil 24A - 24VAC see section C.
5 Manual override option 12D - 12VDC 115A - 115VAC
Blank - No manual override
24D - 24VDC 230A - 230VAC 11 Special features
M - Manual override
For valve dimensions with manual override 36D - 36VDC 12B - 12VDC/w diode* 00 - None
option installed see page A-980. 24B - 24VDC/w diode* (Only required if valve has special features
omitted if “00.”)
*Optional arc suppression diode.
6 Valve housing material
Blank - Cartridge only
A - Aluminum
S - Steel
50.8
(2.00)
Ø 31,7
(1.25)
15.5 19.1
(0.61) (0.75)
19,1 38.1
(0.75) (1.50) 2
2X 7.1
hex 50.8
(0.28)
(2.00)
50.8 1
(2.00)
3.4 44.0 (1.73)
(0.13)
50.8 (2.00)
Warning Warning
0.750” Maintain 5-8 Nm (4-6 ft lbs) Aluminum housings can be used
27,7 - 16 Thd. maximum torque on valve tube nut. for pressures up to 210 bar (3000
2 (1.09) Over tightening may cause psi). Steel housings must be used
Ø 12,6 valve failure. for operating pressures above 210
1 (0.500) bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-25
SV1-10-C/CM/CR - Solenoid valve
Poppet type, normally closed solenoid valve
45 L/min (12 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve blocks flow from port energized the pilot poppet is parts. Lapped seat for low
2 to 1 and free flow is allowed pulled off the seat allowing the leakage. IP69K Tough coil
2 from port 1 to 2. valve to open from port compatibility. Continuously
2 to 1. in the reverse direction rated. Compact design with
the flow is restricted by the low pressure drop.
pilot orifice.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage Less than 5 drops/min. max @ 210 bar ( 3000 psi)
Coil duty Continuous from 85% to 110% of nominal voltage
Response times (100% rated voltage and flow) Energize: 18 ms, de-energize: 46 ms
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,4 kg (0.087 lbs)
2 Seal kit 565803 (Buna-N), 566086 (Viton®)
Viton is a registered trademark of E.I. DuPont
75
dump valve. 5
50
A 3
B
25
1
0
0 2 4 6 8 10 12
Flow - USgpm (105 SUS oil @ 120°F)
Pressure drop vs. Flow
A - Port 1 to port 2 de-energized
B - Port 2 to port 1 energized
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-26 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV1-10-C/CM/CR - Solenoid valve
Poppet type, normally closed solenoid valve
45 L/min (12 USgpm) • 210 bar (3000 psi)
Cartridge only
Ø 38,9
(1.53)
19,0 (0.75) h ex
57,1
(2.25)
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-27
SV11-10-C/CM - Solenoid valve
Poppet type, normally closed solenoid valve
45 L/min (12 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position the When the solenoid is energized Hardened and ground working
valve blocks flow from port 2 to the pilot poppet is pulled off the parts. Lapped seat for low
1 and free flow is allowed from seat allowing the valve to open leakage. IP69K Tough coil
2 port 1 to 2. from port 2 to 1. in the reverse compatibility. Continuously
rated. Compact design with
direction the flow is restricted
low pressure drop. 350 bar
by the pilot orifice. working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage, port 2 to port 1 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,18 kg (0.39 lbs)
Seal kit 565803 (Buna-N), 566086 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
175 12.1
Pressure Drop - psi
0 2 4 6 8 10 12 14 16 18 20
Flow - USgpm (195 SSU oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-28 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV11-10-C/CM - Solenoid valve
Poppet type, normally closed solenoid valve
45 L/min (12 USgpm) • 350 bar (5000 psi)
(DC only)
8 Voltage rating
00 - No coil 24A - 24VAC
4 Style 10 Coil series
12D - 12VDC 115A - 115VAC
C - Normally closed
24D - 24VDC 230A - 230VAC H - 10 series, 29 W For coil part
numbers and dimensions see
36D - 36VDC 12B - 12VDC/w diode* section C.
5 Manual override option
24B - 24VDC/w diode*
Blank - No manual override *Optional arc suppression diode.
M - Manual override
11 Special features
For valve dimensions with manual override
option installed see page A-980. 00 - None
(Only required if valve has special features
omitted if “00”.)
6 Valve housing material
Blank - Cartridge only
S - Steel
57.1
(2.25)
22,2
Ø 38,9 (0.875)
(1.53) hex
2
50.8 2xØ7.14±0.12
63.5 (2.00) (0.281±.005) 19.0
(2.50) (0.75)
57,8 1
(2.28)
44.45±0.25 22.2
9.5 (1.750±.010)
(0.37) (0.87)
63.5 44.45±0.12
(2.50) (1.750±.005)
25,4
(1.00)
31,7 hex Warning
0.875"
(1.25)
2 – 14 Thd. Maintain 5-8 Nm (4-6 ft lbs) maximum torque on
Ø 15,82 valve tube nut.
1 (.623) Over tightening may cause valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-29
SV3-8-C/CM - Solenoid valve
Poppet type, normally closed solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
1
A Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve blocks flow from port energized the pilot poppet is parts. Lapped seat for low
2 to 1 and free flow is allowed pulled off the seat allowing leakage. IP69K Tough coil
2 from port 1 to 2. the valve to open in both compatibility. Continuously
directions. rated. Compact design with
low pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage less than 5 drops/min @ 210 bar (3000 psi)
Coil duty Continuous from 85% to 110% of nominal voltage
Response times (100% rated voltage and flow) Energize: 18 ms De-Energize: 46 ms
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,28 kg (0.62 lbs)
Seal kit 02-165875 (Buna-N), 02-165877 (Viton®)
2
Viton is a registered trademark of E.I. DuPont
50 4
B
0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-30 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV3-8-C/CM - Solenoid valve
Poppet type, normally closed solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
Cartridge only
26,0
(1.02) Installation Drawing
58.4
50.8
(2.30)
(2.00)
Ø 31,7
(1.25)
15.5 19.1
(0.75)
19,1 (0.61)
38.1
(0.75) (1.50) 2
hex 50.8 2X 7.1
(2.00) (0.28)
58,4
50.8
(2.30)
(2.00) 1
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-31
SV3-10-C/CM/CR - Solenoid valve
2-way, 2-position, normally closed, poppet type solenoid valve
45 L/min (12 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve blocks flow from port energized the pilot poppet is parts. Lapped seat for low
2 to 1 and free flow is allowed pulled off the seat allowing leakage. IP69K Tough coil
2 from port 1 to 2. the valve to open in both compatibility. Continuously
directions. rated. Compact design with
low pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage less than 5 drops/min, max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight cartridge only 0,4 kg (0.87 lbs)
Seal kit 565803 (Buna-N), 566086 (Viton®)
Viton is a registered trademark of E.I. DuPont
75 5
dump valve.
50
B 3
A
25
1
0
0 2 4 6 8 10 12
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-32 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV3-10-C/CM/CR - Solenoid valve
2-way, 2-position, normally closed, poppet type solenoid valve
45 L/min (12 USgpm) • 210 bar (3000 psi)
For valve dimensions with manual override *Optional arc suppression diode.
option installed see page A-980.
6 Filter options
Blank - None
F - Filter screen
29,6
(1.16)
Dimensions Torque cartridge in aluminum Note: When solenoid valve is
housing 47-54 Nm (35-40 ft lbs) ordered as cartridge only, coil nut
mm (inch) is included.
Note: Use J series, 23 W
coils with this solenoid valve.
Cartridge only Installation drawing
Ø 38,9
(1.53)
57.1
19,0 (0.75) hex (2.25)
57,1 25.4
19.1 (0.75) (1.00)
(2.25) 44.5
(1.75) 2
63.5
(2.50)
25,4 (1.0 ) hex 1
2X 7.1
(0.28)
0.875" – 14 Thd. 9.5
(0.37) 44.46 (1.750)
31,7 63.5 (2.50)
Warning
(1.25) Maintain 5-8 Nm (4-6 ft lbs)
2
maximum torque on valve
tube nut.
1
Ø 15,80 (0.622) Over tightening may cause
valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-33
SV13-10-C/CM - Solenoid valve
Poppet type, normally closed solenoid valve, (free reverse flow)
45 L/min (12 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve blocks flow from port energized the pilot poppet is parts. Lapped seat for low
2 to 1 and free flow is allowed pulled off the seat allowing leakage. IP69K Tough coil
2 from port 1 to 2. the valve to open in both compatibility. Continuously
directions. rated. Compact design with
low pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage, port 2 to port 1 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,18 kg (0.39 lbs)
Seal kit 565803 (Buna-N), 566086 (Viton®)
Viton is a registered trademark of E.I. DuPont
holding applications or as a
Pressure Drop - bar
75 5
general purpose diverter or
dump valve.
50
3
A
25
B 1
0
0 2 4 6 8 10 12
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 1 to port 2
B - Port 2 to port 1 energized
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-34 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV13-10-C/CM - Solenoid valve
Poppet type, normally closed solenoid valve, (free reverse flow)
45 L/min (12 USgpm) • 350 bar (5000 psi)
Cartridge only
29,6
(1.16)
Ø 38,9
(1.53)
22,2 (0.875) hex
57,8
(2.28)
Warning
25,4 Maintain 5-8 Nm
(1.00) hex (4-6 ft lbs) maximum torque on
0.875"– 14 Thd.
31,7 valve tube nut.
(1.25)
2 Over tightening may cause
valve failure.
Ø 15,82 (0.623) 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-35
SBV1-10-C - Solenoid valve
2-way, 2-position, normally closed, bi-directional, poppet type solenoid valve
76 L/min (20 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve is blocked in both energized the pilot poppet parts. Lapped seat for low
directions. is released from the seat leakage. IP69K Tough coil
2 allowing the main poppet compatibility. Continuously
to open. A series of internal rated. Compact design with
check valves allows full flow in low pressure drop. 210 bar
both directions. working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 76 L/min (20 USgpm)
Internal leakage 5 drops/min, max @ 210 bar (3000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Weight cartridge only 0,18 kg (0.39 lbs)
Seal kit 565806 (Buna-N), 889627 (Viton®)
125 9
B
A 6
75
3
25
0 4 8 12 16 20
A - Port 1 to port 2
B - Port 2 to port 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-36 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SBV1-10-C - Solenoid valve
2-way, 2-position, normally closed, bi-directional, poppet type solenoid valve
76 L/min (20 USgpm) • 210 bar (3000 psi)
8T SAE 8 – 02-175101
See section J for housing details. 9 Coil series
4 Style J - 10 series, 23 W
C - Normally closed For coil part numbers and dimensions
7 Voltage rating
see section C.
00 - No coil 24A - 24VAC
5 Valve housing material 12D - 12VDC 115A - 115VAC 10 Special features
Blank - Cartridge only 24D - 24VDC 230A - 230VAC 00 - None
A - Aluminum (Only required if valve has special features,
36D - 36VDC 12B - 12VDC/w diode*
S - Steel omitted if “00.”)
24B - 24VDC/w diode*
*Optional arc suppression diode.
57.8
(2.28)
Ø 38,9
(1.53) 22.2
22,2 (0.87) hex 19.1 (0.75) (0.87)
50.8
(2.04) 2
63.5
(2.50)
1
2X 7.1
57,8 (0.28)
9.5
(2.28) (0.37) 44.46 (1.750)
63.5 (2.50)
25,4
(1.00) Warning Warning
hex Maintain 5-8 Nm (4-6 ft lbs) Aluminum housings can be
31,7 0.875"– maximum torque on valve used for pressures up to 210
2 (1.25) 14 Thd. tube nut. bar (3000 psi). Steel housings
Over tightening may cause must be used for operating
Ø 15,81
1 (0.622) valve failure. pressures above 210 bar
(3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-37
SBV11-10-C - Solenoid valve
2-way, 2-position, normally closed, bi-directional, poppet type solenoid valve
76 L/min (20 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve is blocked in both energized the pilot poppet parts. Lapped seat for low
directions. is released from the seat leakage. IP69K Tough coil
2 allowing the main poppet compatibility. Continuously
to open. A series of internal rated. Compact design with
check valves allows full flow in low pressure drop. 350 bar
both directions. working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 76 L/min (20 USgpm)
Internal leakage 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Weight cartridge only 0,18 kg (0.39 lbs)
Seal kit 565806 (Buna-N), 889627 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
125 9
B
A 6
75
3
25
0 4 8 12 16 20
A - Port 1 to port 2
B - Port 2 to port 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-38 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SBV11-10-C - Solenoid valve
2-way, 2-position, normally closed, bi-directional, poppet type solenoid valve
76 L/min (20 USgpm) • 350 bar (5000 psi)
57.8
(2.28)
Ø 38,9
(1.53)
22,2 (0.87) hex 22.2
19.1 (0.75) (0.37)
50.8
(2.00) 2
63.5
(2.50)
1
57,8 2X 7.1
(2.28) (0.28)
9.5
(0.37) 44.46 (1.750)
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-39
SV3-12-C/CM/CR - Solenoid valve
2-way, 2-position, normally closed, poppet type solenoid valve
114 L/min (30 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve blocks flow from port energized the pilot poppet is parts. Lapped seat for low
2 to 1 and free flow is allowed pulled off the seat allowing leakage. IP69K Tough coil
2 from port 1 to 2. the valve to open in both compatibility. Continuously
directions. rated. Compact design with
low pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 114 L/min (30 USgpm)
Internal leakage (port 2 to port 1) less than 5 drops/min, max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Energize: 75 ms
Response times (100% rated voltage and flow) De-Energize: 150 ms
Cavity C-12-2 or C-12-2U
Add “U” after number if undercut is required. If undercut is
not specified, expect 10 psi @ 15 USgpm and 20 psi
@ 30 USgpm higher pressure drop.
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
2 Weight including coil 0,336 kg (0.74 lbs)
Seal kit 02-165889 (Buna-N), 02-165888 (Viton®)
Viton is a registered trademark of E.I. DuPont
1
150 10
valve.
100
6
A
B
50
1
0
0 5 10 15 20 25 30
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 1 to port 2 de-energized
B - Port 2 to port 1 energized
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-40 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV3-12-C/CM/CR - Solenoid valve
2-way, 2-position, normally closed, poppet type solenoid valve
114 L/min (30 USgpm) • 210 bar (3000 psi)
Dimensions Torque cartridge in housing Note: When solenoid valve is Note: Use J series, 23 W
ordered as cartridge only, coil nut coils with this solenoid valve.
mm (inch) A - 81-95 Nm (60-70 ft lbs)
is included.
S - 102-115 Nm (75-85 ft lbs)
Cartridge only Installation drawing (Aluminum)
29,6
(1.16) 60.3
(2.37)
12.7 12.7
(.50) (.50)
25.4
Ø 38,9 28.7 (1.00)
(1.13)
(1.53)
88.9 2
(3.50)
19,0 (0.75) hex 63.5
(2.50)
59,8 1
(2.36)
2X 10.31
63.5 (2.50) (.406)
88.9 (3.50) Warning
31,7 (1.25) hex
Maintain 5-8 Nm (4-6 ft lbs)
1.063 " – 12 Thd.
maximum torque on valve
44,7
tube nut.
(1.76) 2
Over tightening may cause
1 valve failure.
Ø 23,75 (0.935) Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-41
SV13-12-C/CM - Solenoid valve
2-way, 2-position, normally closed, poppet type solenoid valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve blocks flow from port energized the pilot poppet is parts. Lapped seat for low
2 to 1 and free flow is allowed pulled off the seat allowing leakage. IP69K Tough coil
2 from port 1 to 2. the valve to open in both compatibility. Continuously
directions. rated. Compact design with
low pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 114 L/min (30 USgpm)
Internal leakage less than 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-12-2 or C-12-2U
Add “U” after number if undercut is required. If undercut is
not specified, expect 10 psi @ 15 USgpm and 20 psi
@ 30 USgpm higher pressure drop.
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,27 kg (0.59 lbs)
2 Seal kit 02-165889 (Buna-N), 02-165888 (Viton®)
Viton is a registered trademark of E.I. DuPont
75 5
A B
50 3
25
1
0
0 5 10 15 20 25 30
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 1 to port 2
B - Port 2 to port 1 energized
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-42 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV13-12-C/CM - Solenoid valve
2-way, 2-position, normally closed, poppet type solenoid valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
Dimensions Note: When solenoid valve is Note: For applications above 210
29,6 ordered as cartridge only, coil nut bar please consult our technical
mm (inch) (1.16) is included. department or use the steel
Torque cartridge in housing body option.
12.7 12.7
(.50) (.50)
25.4
60,3 28.7 (1.00)
(1.13)
(2.37)
88.9 2
(3.50)
63.5
(2.50)
31,75
(1.250) 1
hex 1.062" –
12 Thd. 2X 10.31
63.5 (2.50)
44,7 (.406) Warning
88.9 (3.50)
(1.76) Maintain 5-8 Nm
2 (4-6 ft lbs) maximum
Ø 23,77 torque on valve tube nut.
(.936)
Over tightening may
1
cause valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-43
SBV1-12-C - Solenoid valve
2-way, 2-position, normally closed, bi-directional, poppet type solenoid valve
114 L/min (30 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve is blocked in both energized the pilot poppet parts. Lapped seat for low
directions. is released from the seat leakage. IP69K Tough coil
2 allowing the main poppet compatibility. Continuously
to open. A series of internal rated. Compact design with
check valves allows full flow in low pressure drop.
both directions.
Sectional view
Performance data
Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 114 L/min (30 USgpm)
Internal leakage, port 1 to port 2 and port 2 to port 1 5 drops/min, max @ 210 bar (3000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-12-2 or C-12-2U
Add “U” after number if undercut is required. If undercut is
not specified, expect 10 psi @ 15 USgpm and 20 psi
@ 30 USgpm higher pressure drop.
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Weight cartridge only 0,27 kg (0.59 lbs)
2 Seal kit 02-165889 (Buna-N), 02-165888 (Viton®)
Viton is a registered trademark of E.I. DuPont
8
125
100 6
B
75 4
50
A 2
25
0 5 10 15 20 25 30
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 1 to port 2
B - Port 2 to port 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-44 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SBV1-12-C - Solenoid valve
2-way, 2-position, normally closed, bi-directional, poppet type solenoid valve
114 L/min (30 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10
60.3
(2.37)
12.7 12.7
Ø 38,9 (.50) (.50)
(1.53)
22,2 (0.87) hex 25.4
28.7 (1.00)
(1.13)
88.9 2
(3.50)
63.5
(2.50)
60,3
(2.37)
1
2X 10.31
63.5 (2.50) (.406)
88.9 (3.50)
31,75
(1.250)
44,7 hex 1.062"– Warning Warning
(1.76) 12 Thd. Maintain 5-8 Nm (4-6 ft lbs) Aluminum housings can
2
maximum torque on valve be used for pressures up
tube nut. to 210 bar (3000 psi). Steel
Ø 23,75 housings must be used for
1 (0.935) Over tightening may cause
valve failure. operating pressures above 210
bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-45
SBV11-12-C - Solenoid valve
2-way, 2-position, normally closed, bi-directional, poppet type solenoid valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve is blocked in both energized the pilot poppet parts. Lapped seat for low
directions. is released from the seat leakage. IP69K Tough coil
2 allowing the main poppet compatibility. Continuously
to open. A series of internal rated. Compact design with
check valves allows full flow in low pressure drop. 350 bar
both directions. working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 114 L/min (30 USgpm)
Internal leakage, port 1 to port 2 and port 2 to port 1 5 drops/min, max @ 350 bar (3000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-12-2 or C-12-2U
Add “U” after number if undercut is required. If undercut is
not specified, expect 10 psi @ 15 USgpm and 20 psi
@ 30 USgpm higher pressure drop.
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Weight cartridge only 0,27 kg (0.59 lbs)
2 Seal kit 02-165889 (Buna-N), 02-165888 (Viton®)
Viton is a registered trademark of E.I. DuPont
Pressure drop
Description Cartridge only
This is a 2-way 2-position, high
Flow - L/min (21,8 cSt oil @ 49°C)
pressure bi-directional, pilot
operated, normally closed 0 20 40 60 80 100
poppet type screw in cartridge 175 12
valve. The valve is ideal for
isolating and holding actuators 150
Pressure Drop - bar
Pressure Drop - psi
8
in position. 125
100 6
B
75 4
50
A 2
25
0 5 10 15 20 25 30
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 1 to port 2
B - Port 2 to port 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-46 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SBV11-12-C - Solenoid valve
2-way, 2-position, normally closed, bi-directional, poppet type solenoid valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
60.3
(2.37)
12.7 12.7
(.50) (.50)
Ø 38,9
(1.53) 25.4
28.7 (1.00)
22,2 (0.87) hex (1.13)
88.9 2
(3.50)
63.5
(2.50)
60,3
(2.37) 1
2X 10.31
63.5 (2.50) (.406)
88.9 (3.50)
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-47
SV1-16-C/CM/CR - Solenoid valve
2-way, 2-position, normally closed, poppet type solenoid valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve blocks flow from port energized the pilot poppet is parts. Lapped seat for low
2 to 1 and free flow is allowed pulled off the seat allowing leakage. IP69K Tough coil
2 from port 1 to 2. the valve to open in both compatibility. Continuously
directions. rated. Compact design with
low pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage, port 2 to port 1 less than 5 drops/min, max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-16-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 1,15 kg (2.53 lbs)
Seal kit 565810 (Buna-N), 02-889609 (Viton®)
2 Viton is a registered trademark of E.I. DuPont
150
purpose diverter or
9
dump valve.
100 7
A B 5
50 3
1
0
0 5 10 15 20 25 30 35
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-48 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV1-16-C/CM/CR - Solenoid valve
2-way, 2-position, normally closed, poppet type solenoid valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
Dimensions Torque cartridge in Note: When solenoid valve Notes: Use J series, 23 W
aluminum housing is ordered as cartridge only, coils with this solenoid valve.
mm (inch) 108-122 Nm (80-90 ft lbs) coil nut is included.
Cartridge only
Installation drawings
29,6
(1.16)
65.5
(2.58)
Ø 38,9
(1.53) 31.8
28.4 (1.25)
(1.12)
19,0 (0.75) hex 63.5
(2.50) 2
2X 8.74
88.9 (.344)
63,5 (3.50)
(2.50)
1
1.312" – 12 Thd.
44,4 Warning
(1.75) Maintain 5-8 Nm
2 (4-6 ft lbs) maximum torque on
valve tube nut.
1 Over tightening may cause
Ø 28,55 (1.124) valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-49
SV13-16-C/CM - Solenoid valve
Poppet type, normally closed solenoid valve, (free reverse flow)
132 L/min (35 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is energized Hardened and ground working
the valve blocks flow from port the pilot poppet is pulled off the parts. Lapped seat for low
2 to 1 and free flow is allowed seat allowing the valve to open leakage. IP69K Tough coil
2 from port 1 to 2. in both directions. compatibility. Continuously
rated. Compact design with
low pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage less than 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-16-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,39 kg (0.85 lbs)
Seal kit 565810 (Buna-N), 889609 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
100 7
A B 5
50 3
1
0
0 5 10 15 20 25 30 35
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-50 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV13-16-C/CM - Solenoid valve
Poppet type, normally closed solenoid valve, (free reverse flow)
132 L/min (35 USgpm) • 350 bar (5000 psi)
64.1
(2.52)
Ø 38,9
(1.53)
22,2 (0.875) hex 25.4
25.4 (1.00)
(1.00)
63.5
(2.50) 2
2X 10.3
76.2 (.40)
64,1 (3.00)
(2.52) 38,1
(1.50) 1
hex
12.7 63.5 (2.50)
(0.50) 88.9 (3.50)
1.312"–
12 Thd. Warning
44,6
Maintain 5-8 Nm (4-6 ft lbs)
(1.76) 2 maximum torque on valve
tube nut.
Ø 28,54
1 (1.124) Over tightening may cause
valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-51
SV2-20-C/CM/CR - Solenoid valve
Poppet type, normally closed solenoid valve (free reverse flow)
227 L/min (60 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve blocks flow from energized the pilot poppet is parts. Lapped seat for low
port 2 to 1 and free flow is pulled off the seat allowing leakage. IP69K Tough coil
2 allowed from port 1 to 2. the valve to open in both compatibility. Continuously
directions. rated. Compact design with
low pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 227 L/min (60 USgpm)
Internal leakage, port 2 to port 1 less than 5 drops/min, max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-20-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 1,2 kg (2.70 lbs)
Seal kit 889615 (Buna-N), 889619 (Viton®)
Viton is a registered trademark of E.I. DuPont
dump valve. 140 10
120 8
100
6
80
B
60 4
A
40
2
20
0
0 10 20 30 40 50 60
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-52 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV2-20-C/CM/CR - Solenoid valve
Poppet type, normally closed solenoid valve (free reverse flow)
227 L/min (60 USgpm) • 210 bar (3000 psi)
Dimensions Torque cartridge in Note: When solenoid valve Note: Use J series, 23 W coils
aluminum housing is ordered as cartridge only, coil with this solenoid valve.
mm (inch) nut is included.
128-155 Nm (95-115 ft lbs)
Cartridge only
29,6 Installation drawing
(1.16)
63.5
(2.50) 41.3
(1.62)
Ø 38,9
(1.53) 2
76.2
(3.00) 2X 8.74
101.6 (0.344) 36.0
19,0 (0.75) hex (1.42)
(4.00)
1
63,5
10.3 75.4
(2.50) (2.97)
(0.41)
101.6
(4.00)
1.625" – 12 Thd.
Warning
57,2
(2.25) Maintain 5-8 Nm
2 (4-6 ft lbs) maximum torque on
valve tube nut.
1 Over tightening may cause
Ø 36,47 (1.436) valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-53
SV13-20-C/CM - Solenoid valve
Poppet type, pilot operated solenoid valve
227 L/min (60 USgpm) • 350 bar (5000 psi)
1
A Operation Features
In the de-energized position When the solenoid is energized Hardened and ground working
the valve blocks flow from port the pilot poppet is pulled off the parts. Lapped seat for low
2 to 1 and free flow is allowed seat allowing the valve to open leakage. IP69K Tough coil
2 from port 1 to 2. in both directions. compatibility. Continuously
rated. Compact design with
low pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 227 L/min (60 USgpm)
Internal leakage less than 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-20-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,62 kg (1.37 lbs)
Seal kit 889615 (Buna-N), 889619 (Viton®)
2 Viton is a registered trademark of E.I. DuPont
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-54 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV13-20-C/CM - Solenoid valve
Poppet type, pilot operated solenoid valve
227 L/min (60 USgpm) • 350 bar (5000 psi)
Cartridge only
29,6
(1.16)
Ø 38,9
(1.53)
22,2 (0.875) hex
64,1
(2.52)
47,6 Warning
(1.875) hex Maintain 5-8 Nm
1.625"– 12 Thd. (4-6 ft lbs) maximum torque on
valve tube nut.
57,2
(2.25) Over tightening may cause
2 valve failure.
Ø 36,47 (1.436) 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-55
SV4-8-C/CM - Solenoid valve
Spool type, normally closed solenoid valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened, ground and
the valve blocks flow in both energized the spool moves honed working parts to limit
directions. allowing the valve to open in leakage. IP69 Tough coil
2 both directions. compatibility. Continuously
rated. Compact design with
low pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 11 L/min (3 USgpm)
Internal leakage 82 cm3/min (5 in3/min) max @ 210 bar ( 3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Response times (100% rated voltage and flow) Energize: 27 ms. De-Energize: 24 ms
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,27 kg (0.60 lbs)
Seal kit 02-160777 (Buna-N), 02-160778 (Viton®)
2 Viton is a registered trademark of E.I. DuPont
1
Description Pressure drop
This is a 2-way, 2-position, Cartridge only
spool type, direct acting,
Flow - L/min (21,8 cSt oil @ 49°C)
normally closed solenoid
valve. This valve is used in 0 4 8 11
applications where the flow 300 20
needs to be blocked in both
250
directions when the solenoid
Pressure Drop - bar
Pressure Drop - psi
16
is de-energized. 200
12
150
8
100
50 4
0 1 2 3
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-56 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV4-8-C/CM - Solenoid valve
Spool type, normally closed solenoid valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
26,0
Cartridge only (1.02) Installation drawing
19.1
(0.75) Hex
50.8
(2.00)
22.2
Ø 31,7 (0.875) Hex 15.5
(1.25) (0.61)
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-57
SV14-8-C/CM - Solenoid valve
Spool type, normally closed solenoid valve, 350 bar
11 L/min (3 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened, ground and
the valve blocks flow in both energized the spool moves honed working parts to limit
directions. allowing the valve to open in leakage. IP69 Tough coil
2 both directions. compatibility. Continuously
rated. Compact design with
low pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 11 L/min (3 USgpm)
Internal leakage, port 2 to port 1 140cm3 (8.5in3/min) max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,11 kg (.25 lbs)
Seal kit 02-160777 (Buna-N), 02-160778 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
25 2
0 0
0 0.5 1.0 1.5 2.0 2.5 3.0
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-58 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV14-8-C/CM - Solenoid valve
Spool type, normally closed solenoid valve, 350 bar
11 L/min (3 USgpm) • 350 bar (5000 psi)
8 Voltage rating
4 Style 10 Coil series
00 - No coil 24A - 24VAC
C - Normally closed P - 8 series, 23 W
12D - 12VDC 115A - 115VAC
For coil part numbers and
24D - 24VDC 230A - 230VAC dimensions see section C.
5 Manual override option 36D - 36VDC 12B - 12VDC/w diode*
Blank - No manual override 24B - 24VDC/w diode* 11 Special features
M - Manual override
*Optional arc suppression diode. 00 - None
For valve dimensions with manual
override option installed see page A-980. (Only required if valve has special features,
omitted if “00”.)
50.8
Ø 31,7 (2.00)
(1.25)
15.5
(0.61)
15,8 (0.62) hex
19.1
(0.75)
38.1
(1.50) 2 2X 7.1
50.8 (0.28)
50.8
(2.00) (2.00)
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-59
SV4-10-C/CM/CR - Solenoid valve
Spool type, normally closed solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened, ground and
the valve blocks flow in both energized the spool moves honed working parts to limit
directions. allowing the valve to open in leakage. IP69 Tough coil
2 both directions. compatibility. Continuously
rated. Compact design with
low pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 82 cm3/min (5 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,4 kg (0.087 lbs)
Seal kit 565806 (Buna-N), 889627 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
2000 140
50
3 1500 105
B
25 1000 70
1 500 35
0 0
0 2 4 6 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120F) Flow (USgpm)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-60 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV4-10-C/CM/CR - Solenoid valve
Spool type, normally closed solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
6 Filter option
Blank - None
F - Filter screen 29,6
(1.16)
Dimensions Torque cartridge in steel housing Note: When solenoid valve
45-54 Nm (35-40 ft lbs) is ordered as cartridge only,
mm (inch) coil nut is included.
20.8
2 (0.81)
57,1 63.5
2X 7.1
(2.25) (0.28) (2.50)
19.0
25,4 (1.00) hex 1 (0.75)
9.5
0.875"– 14 Thd. (0.37)
63.5
31,7 (2.50)
(1.25) Warning
2
Maintain 5-8 Nm (4-6 ft lbs)
maximum torque on valve
tube nut.
1 Ø 15,80 (0.622)
Over tightening may cause
valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-61
SV14-10-C/CM - Solenoid valve
Spool type, normally closed solenoid valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened, ground and honed
the valve blocks flow in both energized the spool moves working parts to limit leakage.
directions. allowing the valve to open in IP69 Tough coil compatibility.
2 both directions. Continuously rated. Compact
design with low pressure
drop. 350 bar working
pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 140 cm3/min (8.5 in3/min) max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,18 kg (0.39 lbs)
Seal kit 565806 (Buna-N), 889627 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
75 5
solenoid is de-energized.
50
3
25
1
0
0 2 4 6
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-62 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV14-10-C/CM - Solenoid valve
Spool type, normally closed solenoid valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
Ø 38,9
(1.53) 22,2 (0.875) hex
57,8
(2.28)
Warning
25,4 Maintain 5-8 Nm (4-6 ft lbs)
(1.00) hex maximum torque on valve
tube nut.
0.875" – 14 Thd. 31,7
(1.25) Over tightening may cause
2 valve failure.
Ø 15,82 (.623) 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-63
S207 - Solenoid valve
Poppet type, normally open solenoid valve
Port 1 - 1 L/min (0.25 USgpm) • 350 bar (5000 psi)
Port 2 - 1 L/min (0.25 USgpm) • 210 bar (3000 psi)
A 1 Operation Features • Various coil terminals and
voltages.
In the de-energized position • High flow capacity
the valve allows free flow from with reduced space • Coil interchangeability with
port 1 to 2. When the solenoid requirements. valves of same series.
2 is energized the poppet closes • No dynamic seals. • Manual override, seal
the valve blocking flow from • Standard valve bodies and variations and other options
port 1 to 2 and 2 to 1. common cavities. available.
• One-piece encapsulated coil
• Sealed coil arrangement
with minimal amperage draw. to protect stem from
corrosion.
• Oil immersed armature
solenoid.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-64 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
S207 - Solenoid valve
Poppet type, normally open solenoid valve
Port 1 - 1 L/min (0.25 USgpm) • 350 bar (5000 psi)
Port 2 - 1 L/min (0.25 USgpm) • 210 bar (3000 psi)
Model code S207 V – 24 H – 3W A
1 2 3 4 5
4 Coil Termination
H - DIN43650
F - Flying lead
DM - Deutsch moulded
Other terminations available on request.
50.00 (1.97)
23.50 48.00 (1.85)
(0.93) 36.00
(1.42)
2 holes
Ø6.8
(0.27) thro’
59.00 38.50
(2.32) (1.52) 22.0 12.80
2 (0.50) 50.80
(0.87)
(2.00)
1
15.90
24.00 A/F 8.25 16.00 6.00 (0.63)
(0.63)
27.30 3/4”-16-UNF-2A (0.32) (0.24) 6.00
(0.24)
31.80 (1.25)
(1.07) 2 19.00 (0.75)
Ø12.60 (0.50) 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-65
SV5-8-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve allows free flow energized the pilot poppet parts. Lapped seat for low
from port 2 to 1 and a closes the orifice and the leakage. IP69K Tough coil
2 restricted flow through the valve closes blocking flow compatibility. Continuously
pilot orifice from port 1 to 2. from port 2 to 1 while allowing rated. Compact design with
free flow from port 1 to 2. low pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage less than 5 drops/min, max @ 210 bar (3000 psi) with valve energized
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Response times (100% rated voltage and flow) Energize: 24 ms. De-Energize: 25 ms
Cavity C-8-2
All general purpose hydraulic fluids such as:
Fluids MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,28 kg (0.62 lbs)
Seal kit 02-165875 (Buna-N), 02-165877 (Viton®)
2 Viton is a registered trademark of E.I. DuPont
A 4
50
B
0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-66 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV5-8-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
50.8
(2.00)
19.1
(0.75) 22.22 19.1
Ø 31,7 (0.875) Hex (0.75)
(1.25)
50.8 1
(2.00) 44.0
3.4
(0.13) (1.73)
50.8
(2.00)
22,2 (0.87) hex
Warning
0.750" – 16 Thd. Maintain 5-8 Nm (4-6 ft lbs)
27,8 maximum torque on valve
(1.09) tube nut.
2
Over tightening may cause
1 Ø 12,62 (0.497) valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-67
SV15-8-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
37 L/min (10 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve allows free flow energized the pilot poppet parts. Lapped seat for low
from port 2 to 1 and a closes the orifice and the leakage. IP69K Tough coil
2 restricted flow through the valve closes blocking flow compatibility. Continuously
pilot orifice from port 1 to 2. from port 2 to 1 while allowing rated. Compact design with
free flow from port 1 to 2. low pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 37 L/min (10 USgpm)
Internal leakage 5 drops/min, max @ 210 bar (3000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,11 kg (0.25 lbs)
Seal kit 02-165875 (Buna-N), 02-165877 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
0 0
0 2 4 6 8 10
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-68 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV15-8-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
37 L/min (10 USgpm) • 350 bar (5000 psi)
8 Voltage rating
4 Style 00 - No coil 24A - 24VAC 10 Coil series
O - Normally open 12D - 12VDC 115A - 115VAC P - 8 series, 23 W
For coil part numbers and
24D - 24VDC 230A - 230VAC dimensions see section C.
5 Manual override option 36D - 36VDC 12B - 12VDC/w diode*
Blank - No manual override 24B - 24VDC/w diode* 11 Special features
P - Push type *Optional arc suppression diode. 00 - None
S - Screw type
(Only required if valve has special features,
For valve dimensions with manual omitted if “00”.)
override option installed see page A-980.
Ø 31,7
(1.25)
50.8
19,0 (2.00)
(0.75) 15.5
hex (0.61)
19.1
50.8 (0.75)
38.1
(2.00) (1.50) 2 2X 7.1
50.8 (0.28)
(2.00)
22,2
3.4 44.0 (1.73)
(0.87) (0.13)
hex 50.8 (2.00)
Warning
27,6 0.750" – Maintain 5-8 Nm (4-6 ft lbs)
(1.08) 2 16 Thd. maximum torque on valve
tube nut.
1 Ø 12,6 (0.500) Over tightening may cause
valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-69
SBV11-8-O - Solenoid Bi-directional valve
Bi-directional, normally open solenoid valve
60 L/min (15 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is energized Hardened and ground working
the valve is open in both the pilot poppet closes the pilot parts. Lapped seat for low
directions. A series of internal orifice causing the main poppet leakage. IP69K Tough coil
2 check valves allows full flow in to close. compatibility. Continuously
both directions. rated. Compact design with
low pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 60 L/min (15 USgpm)
Internal leakage, port 1 to port 2 & port 2 to port 1 5 drops/min max @ 350 bar (5000 psi) when energized
Temperature range -40° to 100° C (-40° to 212° F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-2
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Weight cartridge only 0,12 kg (0.26 lbs)
Seal kit 02-160777 (Buna-N), 02-160778 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
A
200
12
150
8
100
B
50 4
0 0
1 3 5 7 9 11 13 15
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 1 to port 2
B - Port 2 to port 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-70 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SBV11-8-O - Solenoid Bi-directional valve
Bi-directional, normally open solenoid valve
60 L/min (15 USgpm) • 350 bar (5000 psi)
Ø 31,7 50.8
(2.00)
(1.25)
19,0 (0.75) hex 15.5
(0.61)
19.1
(0.75)
38.1
(1.50) 2 2X 7.1
50.8 (0.28)
(2.00)
50.8
1
(2.00)
3.4 44.0 (1.73)
(0.13)
50.8 (2.00)
22,2
(0.87) Warning Warning
hex Maintain 5-8 Nm (4-6 ft lbs) Aluminum housings can be
27,7 maximum torque on valve used for pressures up to 210
(1.09) 0.750"– tube nut. bar (3000 psi). Steel housings
2 16 Thd.
Over tightening may cause must be used for operating
Ø 12,62 valve failure. pressures above 210 bar
1 (0.497) (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-71
SV3-8-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position the When the solenoid is energized Hardened and ground working
valve allows free flow in both the pilot poppet closes the parts. Lapped seat for low
directions. orifice and the valve closes leakage. IP69K Tough coil
2 blocking flow from port 2 to 1 compatibility. Continuously
while allowing free flow from rated. Compact design with low
port 1 to 2. pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage less than 5 drops/min, max @ 210 bar (3000 psi) with valve energized
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Response times (100% rated voltage and flow) Energize: 24 ms. De-Energize: 25 ms
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,28 kg (0.62 lbs)
Seal kit 02-165875 (Buna-N)
02-165877 (Viton®)
2 Viton is a registered trademark of E.I. DuPont
1
Description Pressure drop
This is a 2-way, 2-position, Cartridge Only
poppet type, pilot operated,
normally open solenoid valve. Flow - L/min (21,8 cSt oil @ 49°C)
This valve is used in applications 0 4 8 12 16 20
requiring low leakage, such as 200
load holding applications or as
a general purpose diverter or 12
Pressure Drop - bar
Pressure Drop - psi
8
100
A 4
50
B
0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-72 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV3-8-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
64.3
(2.53)
19.1
(0.75) 22.22 19.1
(0.875) Hex (0.75)
Ø 31,7
(1.25)
15.5
19,1 (0.75) hex (0.61)
38.1
(1.50) 2 2X 7.1
50.8 (0.281)
(2.00)
1
64.3 3.4 44.0
(0.13) (1.73)
(2.53)
50.8
(2.00)
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-73
SV3-10-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve (free reverse flow)
45 L/min (12 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve allows free flow in energized the pilot poppet parts. Lapped seat for low
both directions. closes the orifice and the leakage. IP69K Tough coil
2 valve closes blocking flow compatibility. Continuously
from port 2 to 1 while allowing rated. Compact design with low
free flow from port 1 to 2. pressure drop.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage, port 2 to port 1 less than 5 drops/min max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,4 kg (0.87 lbs)
Seal kit 565803 (Buna-N), 566086 (Viton®)
Viton is a registered trademark of E.I. DuPont
dump valve. 75 5
4
50
3
25 2
1
0
0 2 4 6 8 10 12
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-74 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV3-10-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve (free reverse flow)
45 L/min (12 USgpm) • 210 bar (3000 psi)
70.3
(2.77)
70,0
(2.76)
25.4
19.1 (0.75) (1.00)
44.5
25,4 (1.00) hex (1.75) 2
63.5
(2.50)
31,7 0.875” - 14 Thd. 1
2X 7.1
(1.25) (0.28)
9.5
2 (0.37) 44.46 (1.750)
Warning
63.5 (2.50)
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-75
SV5-10-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
45 L/min (12 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve allows free flow from energized the pilot poppet parts. Lapped seat for low
port 2 to 1 and a restricted closes the orifice and the valve leakage. IP69K Tough coil
2 flow through the pilot orifice closes blocking flow from port compatibility. Continuously
from port 1 to 2. 2 to 1 while allowing free flow rated. Compact design with
from port 1 to 2. low pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage, port 2 to port 1 Less than 5 drops/min max @ 210 bar ( 3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,4 kg (0.087 lbs)
Seal kit 565806 (Buna-N), 566086 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
dump valve.
4
50
3
2
25
1
0
0 2 4 6 8 10 12
Flow - USgpm (105 SUS oil @ 1 20°F)
Port 2 to port 1 de-energized
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-76 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV5-10-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
45 L/min (12 USgpm) • 210 bar (3000 psi)
6 Filter option
Blank - None
F - Filter screen
Ø 38,9
(1.53)
70,0
(2.76)
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-77
SV15-10-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
45 L/min (12 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve allows free flow energized the pilot poppet parts. Lapped seat for low
from port 2 to 1 and a closes the orifice and the leakage. IP69K Tough coil
2 restricted flow through the valve closes blocking flow compatibility. Continuously
pilot orifice from port 1 to 2. from port 2 to 1 while allowing rated. Compact design with
free flow from port 1 to 2. low pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage less than 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,18 kg (0.39 lbs)
Seal kit 565803 (Buna-N), 566086 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
25
2
0 2 4 6 8 10 12
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-78 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV15-10-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
45 L/min (12 USgpm) • 350 bar (5000 psi)
For valve dimensions with manual override *Optional arc suppression diode.
option installed see page A-980.
22.2
57,8 19.1 (0.75) (0.87)
(2.28) 50.3
(2.00) 2
25,4
63.5
(1.00) (2.50)
hex 1
2X 7.1
0.875" – (0.28)
14 Thd. 9.5
31,7 (0.37) 44.46 (1.750) Warning
(1.25) 63.5 (2.50) Maintain 5-8 Nm (4-6 ft
2
lbs) maximum torque on
Ø 15,82 valve tube nut.
1 (0.623) Over tightening may
cause valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-79
SV13-10-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve (free reverse flow)
45 L/min (12 USgpm) • 350 bar (5000 psi)
1
A Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve allows free flow in energized the pilot poppet parts. Lapped seat for low
both directions. closes the orifice and the leakage. IP69K Tough coil
2 valve closes blocking flow compatibility. Continuously
from port 2 to 1 while allowing rated. Compact design with
free flow from port 1 to 2. low pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage less than 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight including coil 0,18 kg (0.39 lbs)
Seal kit 565803 (Buna-N), 566086 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-80 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV13-10-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve (free reverse flow)
45 L/min (12 USgpm) • 350 bar (5000 psi)
57.1
Ø 38,9 (2.25)
(1.53)
22,2 (0.875) hex
22.7
19.1 (0.75) (0.87)
50.3
(2.00) 2
57,8
(2.28) 63.5
(2.50)
1
25,4
2X 7.1
(1.00) (0.28)
hex 9.5
(0.37) 44.46 (1.750)
Warning
31,7 0.875" – 63.5 (2.50)
(1.25) 14 Thd. Maintain 5-8 Nm (4-6 ft lbs)
2 maximum torque on valve
tube nut.
Ø 15,82
1 (.623) Over tightening may cause
valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-81
SBV11-10-O - Solenoid Bi-directional valve
Bi-directional, normally open solenoid valve
76 L/min (20 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
IIn the de-energized position When the solenoid is Hardened and ground working
the valve is open in both energized the pilot poppet parts. Lapped seat for low
directions. A series of internal closes the pilot orifice causing leakage. IP69K Tough coil
2 check valves allows full flow in the main poppet to close. compatibility. Continuously
both directions. rated. Compact design with
low pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 76 L/min (20 USgpm)
Internal leakage, port 1 to port 2 or port 2 to port 1 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or Steel
Weight including coil 0,18 kg (0.39 lbs)
Seal kit 565806 (Buna-N), 889627 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
in position. 150
8
100
50 4
0 4 8 12 16 20
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-82 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SBV11-10-O - Solenoid Bi-directional valve
Bi-directional, normally open solenoid valve
76 L/min (20 USgpm) • 350 bar (5000 psi)
Ø 38,9
22.2
(1.53) 19.1 (0.75) (0.37)
22,2 (0.87) hex 50.8
(2.00) 2
63.5
(2.50)
1
57,8 2X 7.1
(2.28) (0.28)
9.5
(0.37) 44.46 (1.750)
63.5 (2.50)
25,4 Warning Warning
(1.00)
hex Maintain 5-8 Nm (4-6 ft lbs) Aluminum housings can be
31,7 maximum torque on valve used for pressures up to 210
(1.25) 0.875"– tube nut.
2 bar (3000 psi). Steel housings
14 thd
Over tightening may cause must be used for operating
Ø 15,80 valve failure. pressures above 210
1 (0.622) bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-83
SV3-12-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
114 L/min (30 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position the When the solenoid is energized Hardened and ground working
valve allows free flow in both the pilot poppet closes the parts. Lapped seat for low
directions. orifice and the valve closes leakage. IP69K Tough coil
2 blocking flow from port 2 to 1 compatibility. Continuously
while allowing free flow from rated. Compact design with low
port 1 to 2. pressure drop.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 114 L/min (30 USgpm)
Internal leakage, port 2 to port 1 less than 5 drops/min, max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-12-2 or C-12-2U
Add “U” after number if undercut is required. If undercut is not specified,
expect 10 psi@15 USgpm and 20 psi @ 30 USgpm higher pressure drop.
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 17/15/12
Housing material (standard) Aluminum
Weight including coil 0,336 kg (0.74 lbs)
Seal kit 02-165889 (Buna-N), 02-165888 (Viton®)
2
Viton is a registered trademark of E.I. DuPont
A 8
100
B
4
50
0
0 5 10 15 20 25 30
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-84 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV3-12-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
114 L/min (30 USgpm) • 210 bar (3000 psi)
Ø 38,9
(1.53)
73.2
(2.88)
12.7 12.7
19,0 (0.75) hex (.50) (.50)
25.4
28.7 (1.00)
(1.13)
88.9 2
73.03 (3.50)
63.5
(2.875) (2.50)
1
38,1 (1.50) hex 2X 10.31
63.5 (2.50) (.406)
1.312" – 12 Thd. 88.9 (3.50) Warning
44,6 Maintain 5-8 Nm (4-6 ft lbs)
(1.75)
2 maximum torque on valve
tube nut.
1 Over tightening may cause
Ø 23.75 (0.94)
valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-85
SV13-12-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position the When the solenoid is energized Hardened and ground working
valve allows free flow in both the pilot poppet closes the parts. Lapped seat for low
directions. orifice and the valve closes leakage. IP69K Tough coil
2 blocking flow from port 2 to 1 compatibility. Continuously
while allowing free flow from rated. Compact design with
port 1 to 2. low pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 114 L/min (30 USgpm)
Internal leakage less than 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-12-2 or C-12-2U
Add “U” after number if undercut is required. If undercut is
not specified, expect 10 psi@15 USgpm and 20 psi @
30 USgpm higher pressure drop.
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight including coil 0,27 kg (0.59 lbs)
2 Seal kit 02-165889 (Buna-N), 02-165888 (Viton®)
Viton is a registered trademark of E.I. DuPont
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-86 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV13-12-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
60.3
(2.37)
Ø 38,9
(1.53) 12.7 12.7
(.50) (.50)
22,2 (0.875) hex
25.4
28.7 (1.00)
(1.13)
88.9 2
60,3 (3.50)
63.5
(2.37) (2.50)
31,75 1
(1.250)
hex 2X 10.31
63.5 (2.50) (.406)
88.9 (3.50)
1.062" – Warning
44,7 12 Thd. Maintain 5-8 Nm (4-6 ft lbs)
(1.76) maximum torque on valve
2 tube nut.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-87
SBV11-12-O - Solenoid valve
Bi-directional, poppet type, normally open solenoid valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position the When the solenoid is energized Hardened and ground working
valve is open in both directions. the pilot poppet closes the pilot parts. Lapped seat for low
A series of internal check orifice causing the main poppet leakage. IP69K Tough coil
2 valves allows full flow in both to close. compatibility. Continuously
directions. rated. Compact design with
low pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 114 L/min (30 USgpm)
Internal leakage 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-12-2 or C-12-2U
Add “U” after number if undercut is required. If undercut is
not specified, expect 10 psi@15 USgpm and 20 psi @
30 USgpm higher pressure drop.
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Weight including coil 0,27 kg (0.59 lbs)
2 Seal kit 02-165889 (Buna-N), 02-165888 (Viton®)
Viton is a registered trademark of E.I. DuPont
in position.
100 6
B
A 4
50
2
0 5 10 15 20 25 30
A - Port 1 to port 2
B - Port 2 to port 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-88 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SBV11-12-O - Solenoid valve
Bi-directional, poppet type, normally open solenoid valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
60.3
(2.37)
Ø 38,9
12.7 12.7
(1.53) (.50)
(.50)
22,2 (0.875) hex
25.4
28.7 (1.00)
(1.13)
88.9 2
(3.50)
63.5
(2.50)
60,3
(2.37)
1
2X 10.31
63.5 (2.50) (.406)
88.9 (3.50)
31,75
(1.250)
hex Warning Warning
44,7 1.062"–
(1.76) 12 Thd. Maintain 5-8 Nm (4-6 ft lbs) Aluminum housings can be
2
maximum torque on valve used for pressures up to 210
tube nut. bar (3000 psi). Steel housings
Ø23,75 must be used for operating
(0.935) Over tightening may cause
1 pressures above 210 bar
valve failure.
(3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-89
SV3-16-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
A 1 Operation
When the solenoid is energized
Features
In the de-energized position the Hardened and ground working
valve allows free flow in both the pilot poppet closes the parts. Lapped seat for low
directions. orifice and the valve closes leakage. IP69K Tough coil
2
blocking flow from port 2 to 1 compatibility. Continuously
while allowing free flow from rated. Compact design with low
port 1 to 2. pressure drop.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage, port 2 to port 1 less than 5 drops/min, max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-16-2
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,9 kg (1.98 lbs)
Seal kit 565810 (Buna-N), 889609 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
dump valve. 75
B
50
3
A
25
0 0
0 10 2 0 25 30 35
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-90 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV3-16-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
31.8
28.4 (1.25)
(1.12)
63.5
(2.50) 2
73.03
2X 8.74
(2.875) 88.9 (.344)
(3.50)
1
38,1 (1.50) hex
10.3 68.28 (2.688)
1.312" – 12 Thd. (0.41) 88.9 (3.50)
44,6
(1.75) Warning
2
Maintain 5-8 Nm (4-6 ft lbs) maximum
1 torque on valve tube nut.
Ø 23.75 (0.94)
Over tightening may cause valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-91
SV13-16-O/OP/OS - Solenoid valve
Poppet type normally open solenoid valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve allows free flow in energized the pilot poppet parts. Lapped seat for low
both directions. closes the orifice and the leakage. IP69K Tough coil
2 valve closes blocking flow compatibility. Continuously
from port 2 to 1 while allowing rated. Compact design with
free flow from port 1 to 2. low Pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage less than 5 drops/min max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-16-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight Cartridge only 0,39 kg (0.85 lbs)
Seal kit 565810 (Buna-N), 889609 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
holding applications or as a
Pressure Drop - psi
9
general purpose diverter or 125
dump valve. 100 7
A B
75 5
50 3
25
1
0
0 5 10 15 20 25 30 35
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-92 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV13-16-O/OP/OS - Solenoid valve
Poppet type normally open solenoid valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
29,6
Dimensions (1.16)
Torque cartridge in steel Note: When solenoid valve
mm (inch) housing 136-149 Nm is ordered as Cartridge only,
(100-110 ft lbs) nut is included.
Ø 38,9
(1.53) 64.1
22,2 (0.875) hex (2.52)
25.4
25.4 (1.00)
(1.00)
64,1 63.5
(2.50) 2
(2.52) 38,1 2X 10.3
(1.50) 76.2 (.40)
hex (3.00)
1.312"– 1
12 Thd.
12.7 63.5 (2.50)
(0.50) 88.9 (3.50)
44,6 Warning
(1.76) Maintain 5-8 Nm (4-6 ft lbs)
Ø 28,54 maximum torque on valve
2 (1.124) tube nut.
Over tightening may cause
valve failure.
1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-93
SV3-20-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
227 L/min (60 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve allows free flow in energized the pilot poppet parts. Lapped seat for low
both directions. closes the orifice and the leakage. IP69K Tough coil
2 valve closes blocking flow compatibility. Continuously
from port 2 to 1 while allowing rated. Compact design with
free flow from port 1 to 2. low Pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 227 L/min (60 USgpm)
Internal leakage, port 2 to port 1 less than 5 drops/min max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Response times (100% rated voltage and flow) Energize: 75 ms
De-Energize: 150 ms
Cavity C-20-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 1,2 kg (2.70 lbs)
Seal kit 889615 (Buna-N), 889619 (Viton®)
2
Viton is a registered trademark of E.I. DuPont
0
0 20 40 60
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-94 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV3-20-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
227 L/min (60 USgpm) • 210 bar (3000 psi)
76.5
(3.01) 41.3
Ø 38,9 (1.62)
(1.53)
1
76,2
(3.00)
10.3 75.4
(0.41) (2.97)
101.6
(4.00)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-95
SV13-20-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
227 L/min (60 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened and ground working
the valve allows free flow in energized the pilot poppet parts. Lapped seat for low
both directions. closes the orifice and the leakage. IP69K Tough coil
2 valve closes blocking flow compatibility. Continuously
from port 2 to 1 while allowing rated. Compact design with
free flow from port 1 to 2. low Pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)*
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 227 L/min (60 USgpm)
Internal leakage, port 2 to port 1 less than 5 drops/min max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-20-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight Cartridge only 0,62 kg (1.37 lbs)
Seal kit 889615 (Buna-N), 889619 (Viton®)
*For application pressure over 280 bar (4000 psi) consult factory
2 Viton is a registered trademark of E.I. DuPont
9
general purpose diverter or 125
dump valve. A
100 7
B
75 5
50 3
25
1
0 10 20 30 40 50 60
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-96 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV13-20-O/OP/OS - Solenoid valve
Poppet type, normally open solenoid valve
227 L/min (60 USgpm) • 350 bar (5000 psi)
Ø 38,9
(1.53) 64.2
(2.52) 31.7
22,2 (0.875) hex (1.25)
64,1 76.2 2
(2.52) (3.00) 2X 10.3
88.4 (0.40) 31.7
(3.50) (1.25)
47,6 1
(1.875)
hex 12.7 76.2
(0.50) (3.00)
101.6
57,2 1.625" – (4.00)
(2.25) 12 Thd. Warning
Maintain 5-8 Nm (4-6 ft lbs)
2 maximum torque on valve
tube nut.
Over tightening may cause
Ø 36,47
1 (1.436) valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-97
SV4-8-O/OM - Solenoid valve
Spool type, normally open solenoid valve
13 L/min (4 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened, ground and honed
the valve is open in both energized the spool moves working parts to limit leakage.
directions. causing the valve to close in IP69 Tough coil compatibility.
2 both directions. Continuously rated. Compact
design with low Pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 13 L/min (4 USgpm)
Internal leakage 82 cm3/min (5 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Response times (100% rated voltage and flow) Energize: 21 ms
De-Energize: 38 ms
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,27 kg (0.60 lbs)
2 Seal kit 02-160777 (Buna-N), 02-160778 (Viton®)
Viton is a registered trademark of E.I. DuPont
is energized. 250
16
200
12
150
8
100
50 4
0
0 1 2 3 4
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-98 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV4-8-O/OM - Solenoid valve
Spool type, normally open solenoid valve
13 L/min (4 USgpm) • 210 bar (3000 psi)
19.1
(0.75) Hex
50.8
(2.00)
22.2
(0.875) Hex 15.5
Ø 31,7 19.1
(0.61)
(1.25) (0.75)
2
19,1 (0.75) hex 38.1
(1.50)
50.8
(2.00) 2 X 7.1
(0.281)
50,8 1
1
(2.00) 44.0
3.4 (1.734)
(0.13) 50.8
(2.00)
22,2 (0.87) hex
Warning
0.750" – 16 Thd.
Maintain 5-8 Nm (4-6 ft lbs)
27,8 maximum torque on valve
(1.09)
2 tube nut.
Over tightening may cause
1 Ø 12,62 (0.497) valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-99
SV14-8-O/OM - Solenoid valve
Spool type, normally open solenoid valve
13 L/min (3.5 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened, ground and honed
the valve is open in both energized the spool moves working parts to limit leakage.
directions. causing the valve to close in IP69 Tough coil compatibility.
2 both directions. Continuously rated. Compact
design with low pressure drop.
350 bar working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 13 L/min (3.5 USgpm)
Internal leakage, port 2 to port 1 140 cm3/min (8.5 in3/min) max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight Cartridge only 0,11 kg (0.25 lbs)
Seal kit 02-165875 (Buna-N), 02-165877 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
8
solenoid is energized. 100
6
75
4
50
2
25
0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-100 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV14-8-O/OM - Solenoid valve
Spool type, normally open solenoid valve
13 L/min (3.5 USgpm) • 350 bar (5000 psi)
8 Voltage rating
4 Style 10 Coil series
00 - No coil 24A - 24VAC
O - Normally open P - 8 series, 23 W
12D - 12VDC 115A - 115VAC
For coil part numbers and
24D - 24VDC 230A - 230VAC dimensions see section C.
5 Manual override option 36D - 36VDC 12B - 12VDC/w diode*
Blank - No manual override 24B - 24VDC/w diode* 11 Special features
M - Manual override 00 - None
*Optional arc suppression diode.
For valve dimensions with manual (Only required if valve has special features,
override option installed see page A-980. omitted if “00”.)
50.8
(2.00)
Ø 31,7
(1.25) 15.5
(0.61)
19,0
(0.75) 19.1
(0.75)
hex 38.1
(1.50) 2 2X 7.1
50.8 50.8 (0.28)
(2.00) (2.00)
1
22,2
(0.87) 3.4 44.0 (1.73)
hex (0.13)
50.8 (2.00)
0.750" – Warning
27,7 16 Thd. Maintain 5-8 Nm (4-6 ft lbs)
(1.09) 2 maximum torque on valve
tube nut.
Ø 12,6
1 (0.500) Over tightening may cause
valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-101
SV4-10-O/OM/OR - Solenoid valve
Spool type, normally open solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened, ground and honed
the valve is open in both energized the spool moves working parts to limit leakage.
directions. causing the valve to close in IP69 Tough coil compatibility.
2 both directions. Continuously rated. Compact
design with low pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage, port 2 to port 1 82 cm3/min (5 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including cartridge 0,4 kg (0.87 lbs)
Seal kit 565806 (Buna-N), 889627 (Viton®)
Viton is a registered trademark of E.I. DuPont
is energized. 75 5
4
50
3
2
25
1
0 0
0 2 4 6
Flow - USgpm (105 SUS oil @ 120°F)
Port 2 to port 1 or
Port 1 to port 2 de-energized
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-102 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV4-10-O/OM/OR - Solenoid valve
Spool type, normally open solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
6 Filter option
Blank - None
F - Filter screen
20.8
(0.81)
2X 7.1 63.5
57,1 (0.28) 2 (2.50)
(2.25)
19.0
1 (0.75)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-103
SV14-10-O/OM - Solenoid valve
Spool type, normally open solenoid valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
A 1 Operation Features
In the de-energized position When the solenoid is Hardened, ground and
the valve is open in both energized the spool moves honed working parts to limit
directions. causing the valve to close in leakage. IP69 Tough coil
2 both directions. compatibility. Continuously
rated. Compact design with
low pressure drop. 350 bar
working pressure.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage, port 2 to port 1 140 cm3/min (8.5 in3/min) max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,18 kg (0.39 lbs)
Seal kit 566806 (Buna-N), 889627 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
solenoid is energized. 75 5
50
3
25
1
0 2 4 6
Port 2 to port 1 or
Port 1 to port 2 de-energized
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-104 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV14-10-O/OM - Solenoid valve
Spool type, normally open solenoid valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
57.1
(2.25)
Ø 38,9
(1.53)
22,2 (0.875) hex 22.2
19.1 (0.75) (0.37)
50.8
(2.00) 2
57,8 63.5
(2.50)
(2.28)
1
2X 7.1
(0.28)
9.5
(0.37) 44.46 (1.750)
25,4
(1.00) 63.5 (2.50) Warning
31,7 hex 0.875" – Maintain 5-8 Nm (4-6 ft lbs)
(1.25) 14 Thd.
maximum torque on valve
2
tube nut.
Ø 15,82 Over tightening may cause
1 (.623) valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-105
SV1-8-3/3M - Solenoid valve
3-way, 2-position spool type solenoid valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
A 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 3 to port working parts to limit leakage.
port 1 to 2 while port 3 is 1 while port 2 is blocked. IP69K Tough coil compatibility.
1 3 blocked. Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 11 L/min (3 USgpm)
Internal leakage (per land) 82 cm3/min (5 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
3 Weight including coil 0,30 kg (0.66 lbs)
Seal kit 02-160755 (Buna-N), 02-160756 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
0
0 1 2 3 0 1 2 3 4 5
Flow - USgpm (105 SUS oil @ 120°F) Flow - USgpm (105 SUS oil @ 120°F)
A - Selector 1 to 3
B - Normally Open
C - Normally closed
and Selector 1 to 2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-106 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV1-8-3/3M - Solenoid valve
3-way, 2-position spool type solenoid valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
19.1
(0.75) 50.8
15.5 (2.00) 19.1
Ø 31,7 (0.61) (0.75)
(1.25)
3
54
19,1 (0.75) hex (2.12)
2 2x7.14
67.3 (0.281)
(2.65) 29.8
1 (1.17)
50,8
(2.00)
3.4 56.74
(0.13) (2.23)
63.5
(2.50)
22,2 (0.87) hex
0.750" – 16 Thd.
40,7 Warning
3
(1.60) Maintain 5-8 Nm (4-6 ft lbs)
maximum torque on valve
2
tube nut.
1 Over tightening may cause
Ø 14,20 (0.559)
Ø 15,80 (0.622) valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-107
SV11-8-3/3M - Solenoid valve
3-way, 2-position spool type solenoid valve
11 L/min (3 USgpm) • 350 bar (5000 psi)
A 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 1 to port working parts to limit leakage.
port 2 to 1 while port 3 is 3 while port 2 is blocked. IP69K Tough coil compatibility.
1 3 blocked. Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 11 L/min (3 USgpm)
Internal leakage, combined port 2 and port 1 140 cm3/min (8.5 in3/min) max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight Cartridge only 0,13 kg (0.28 lbs)
3 Seal kit 02-160755 (Buna-N), 02-160756 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
6
two position solenoid valve is 75 3000 210
needed. B
C 4 B
50 2000 140
2 1000 70
25
0 0 0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Flow - USgpm (105 SUS oil @ 120°F) Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-108 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV11-8-3/3M - Solenoid valve
3-way, 2-position spool type solenoid valve
11 L/min (3 USgpm) • 350 bar (5000 psi)
3
54 2
(2.12) 2x7.14
66.7 (0.281)
(2.63) 29.8
50.8 1 (1.17)
(2.00)
3.4 56.74
(0.13) (2.23)
22,2 63.5
(2.50)
(0.87)
hex 0.750" – Warning
16 Thd.
Maintain 5-8 Nm (4-6 ft lbs)
40,6 3
maximum torque on valve
(1.60)
tube nut.
2
Ø 14,2 Over tightening may cause
(0.559) Ø 15,8 valve failure.
1 (0.622)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-109
SV4-8-3/3P - Solenoid valve
3-way, 2-position spool type solenoid valve
13 L/min (4 USgpm) • 210 bar (3000 psi)
A 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 2 to port working parts to limit leakage.
port 2 to 1 while port 3 is 3 while port 1 is blocked. IP69K Tough coil compatibility.
1 3 blocked. Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 13 L/min (4 USgpm)
Internal leakage 82 cm3/min (5 in3/min) max @ 210 bar ( 3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Energize: 22 ms
Response times (100% rated voltage and flow) De-Energize: 27 ms
Cavity C-8-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
3
Weight including coil 0,29 kg (0.64 lbs)
Seal kit 02-160755 (Buna-N), 02-160756 (Viton®)
2
Viton is a registered trademark of E.I. DuPont
Note: Pressure on port 1 should not exceed 20 bar (300 psi).
1
0 1 2 3 4 0 1 2 3 4 5
Flow - USgpm (105 SUS oil @ 120°F) Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-110 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV4-8-3/3P - Solenoid valve
3-way, 2-position spool type solenoid valve
13 L/min (4 USgpm) • 210 bar (3000 psi)
50.8
19.1 (2.00)
(0.75) 22.23
15.5 (0.875) Hex 19.1
Ø 31,7 (0.61) (0.75)
(1.25)
3
54 2
(2.12) 2x7.14
19,1 (0.75) hex (0.281)
67.3
(2.65) 29.8
1 (1.17)
63.5
(2.50)
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-111
S229 - Solenoid valve
3-way, 2-position poppet type solenoid valve
Up to 12L/min (3.2 USgpm) • 210 bar (3000 psi)
3-2
use in systems where low 3000 210
580 40
Pressure - psi
leakage is important.
Pressure - bar
0 0 0 0
0 1.3 2.6 3.9 5.2 6.5 0 1 2 3 4 5 6 7
Flow - US gpm Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-112 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
S229 - Solenoid valve
3-way, 2-position poppet type solenoid valve
Up to 12L/min (3.2 USgpm) • 210 bar (3000 psi)
5 Voltage
3 Manual Override 12 - 12 VDC
2 - Screw
24 - 24 VDC
3 - Push
110 - 110 VAC
(Consult factory for availability).
See page A-960. 220 - 220 VAC
Dimensions
mm (inch)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-113
S520(H) - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 40L/min (10 USgpm) • 210 bar (3000 psi)
A 1 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from port is allowed from port 3 to port 1 working parts to limit leakage.
1 to 2 while port 3 is blocked. while port 2 is blocked. Continuously rated. Compact
2 3 design with low Pressure drop.
Rated pressure on all ports.
290 20
2900 S520H 200 2900 200
Pressure - bar
Normally
Pressure - psi
232 16 open
2175 150 2175 150
174 12
S520
1450 100 1450 100
116 8 Normally
closed
58 4 725 50 725 50
0 0 0 0 0 0
0 2.6 5.2 7.8 10.4 0 2.6 5.2 7.8 10.4 0 2.6 5.2 7.8 10.4
Flow - US gpm Flow - US gpm Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-114 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
S520(H) - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 40L/min (10 USgpm) • 210 bar (3000 psi)
V - Viton
®
5 Voltage
12 - 12 VDC
3 Manual Override 24 - 24 VDC
2 - Screw 110 - 110 VAC
(Consult factory for availability). 220 - 220 VAC
See page A-960.
Dimensions
mm (inch)
34.50 18.50
(1.36) (0.73)
3
66.00 50.00 54.00
(2.60) (1.97) 2 (2.13) 66.80
(2.63)
1
2 holes Ø7.1
(0.28) thro’ 16.00
31.80 (1.25) (0.63) 31.80
50.80 (1.25)
25.40 A/F 8.30 6.35 (0.25) (2.00)
7/8”-14- (0.33)
UNF-2A
46.70 3
(1.84)
2
1
Ø15.80 (0.62)
Ø17.40 (0.69)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-115
S521(H) - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 44 L/min (11.5 USgpm) • Up to 210 bar (3000 psi)
A 2 Operation Features
In the de-energized position • High flow capacity • Various coil terminals and
this valve allows flow from with reduced space voltages.
port 2 to 1 while port 3 is requirements. • Coil interchangeability with
1 3 blocked. In the energized • No dynamic seals. Series S5 valves.
position flow is allowed from • Standard valve bodies and • Manual override, seal
port 2 to port 3 while port 1 common cavities. variations and other options
is blocked. available.
• One-piece encapsulated coil
with minimal amperage draw. • Sealed coil arrangement
Sectional view • Oil immersed armature to protect stem from
solenoid. corrosion.
Performance data
Ratings and specifications
S521H
closed S521H
210 15 2900 200
2-3 2900 200
Pressure - psi
Pressure - bar
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-116 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
S521(H) - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 44 L/min (11.5 USgpm) • Up to 210 bar (3000 psi)
Dimensions
mm (inch)
34.50 18.50
(1.36) (0.73)
66.00 50.00
(2.60) (1.97) 3
54.00
2 (2.13) 66.80
(2.63)
1
2 holes Ø7.1
25.40 A/F (0.28) thro’
8.30 16.00
(0.33) 31.80 (1.25) (0.63) 31.80
50.80 (1.25)
47.10 7/8”-14-UNF-2A 3 6.35 (0.25) (2.00)
(1.85)
2
Ø15.80 (0.62) 1
Ø17.40 (0.68)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-117
S525(H) - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 30 L/min (8 USgpm) • 210 bar (3000 psi)
A 2 Operation Features
In the de-energized position • High flow capacity • Various coil terminals and
this valve allows flow from with reduced space voltages.
port 2 to 3 while port 1 is requirements. • Coil interchangeability with
3 1 blocked. In the energized • No dynamic seals. Series S5 valves.
position flow is allowed from • Standard valve bodies and • Manual override, seal
port 1 to port 2 while port 3 is common cavities. variations and other options
blocked. • One-piece encapsulated coil available.
with minimal amperage draw. • Sealed coil arrangement
Sectional view
• Oil immersed armature to protect stem from
solenoid. corrosion.
Performance data
Ratings and specifications
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-118 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
S525(H) - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 30 L/min (8 USgpm) • 210 bar (3000 psi)
Dimensions
mm (inch)
49.00 (1.90)
21.00 63.50 (2.50)
(0.82) 35.50
(1.40)
34.50 18.50
(1.36) (0.73)
66.00 50.00 3
(2.60) (1.97) 54.00
2 (2.13) 66.80
(2.63)
1
2 holes Ø7.1
(0.28) thro’ 16.00
31.80 (1.25) (0.63) 31.80
25.40 A/F 8.30 50.80 (1.25)
7/8”-14- (0.33) 6.35 (0.25) (2.00)
UNF-2A
46.70 3
(1.84)
2
1
Ø15.80 (0.62)
Ø17.40 (0.69)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-119
S526 - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 35 L/min (9 USgpm) • 210 bar (3000 psi)
Pressure - bar
0 0 0 0
0 2.6 5.2 7.8 10.4 0 2.6 5.2 7.8 10.4
Flow - US gpm Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-120 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
S526 - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 35 L/min (9 USgpm) • 210 bar (3000 psi)
5 Voltage
3 Manual override 12 - 12 VDC
2 - Screw
24 - 24 VDC
(Consult factory for availability).
See page A-960 110 - 110 VAC
220 - 220 VAC
Dimensions
mm (inch)
63.50 (2.50)
49.00 (1.90)
21.00
(0.82) 35.50
(1.40)
34.50 18.50
(1.36) (0.73)
3
66.00 50.00 54.00
2 (2.13) 66.80
(2.60) (1.97) (2.63)
1
2 holes Ø7.1
(0.28) thro’ 16.00
31.80 (1.25) (0.63) 31.80
50.80 (1.25)
25.40 A/F 8.30 6.35 (0.25) (2.00)
7/8”-14- (0.33)
UNF-2A
46.70 3
(1.84)
2
1
Ø15.80 (0.62)
Ø17.40 (0.69)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-121
SV1-10-3/3M/3R - Solenoid valve
3-way, 2-position, spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
A 2 Operation Features
In the de-energized position this In the energized position flow Hardened, ground and honed
valve allows flow from port 1 to is allowed from port 3 to port 1 working parts to limit leakage.
2 while port 3 is blocked. while port 2 is blocked. IP69K Tough coil compatibility.
1 3 Continuously rated. Compact
design with low Pressure
drop. Rated pressure on
all ports.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23L/min (6 USgpm)
Max. flow port 1 to 2-10L/min (2.5 USgpm)
Internal leakage 164 cm3/min (10 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120° C (-40° to 248° F)
Coil duty Continuous from 85% to 110% of normal voltage
Cavity C-10-3
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,42 kg (0.93 lbs)
3 Seal kit 889624 (Buna-N), 889628 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-122 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV1-10-3/3M/3R - Solenoid valve
3-way, 2-position, spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
4 Style
3 - 3-way, 2 position 9 Special features
7 Voltage rating
00 - None
00 - No coil 24A - 24VAC
(Only required if valve has Special features,
5 Manual override option 12D - 12VDC 115A - 115VAC omitted if “00”.)
Blank - No manual override 24D - 24VDC 230A - 230VAC Note: Use J series, 23W coils with this
solenoid valve.
M - Knob type 36D - 36VDC 12B - 12VDC/w diode*
R - Cable type 24B - 24VDC/w diode*
For valve dimensions with Manual
*Optional arc suppression diode
override option installed see page
A-980.
Ø 38,9 57.1
(1.53) 24,6 (2.25) 25,4
(.97) (1.00)
0.875" – 14 Thd.
46,0 3
Warning
(1.81)
Maintain 5-8 Nm (4-6 ft lbs)
2 maximum torque on valve
tube nut.
1 Over tightening may cause
Ø 15,80 (0.622) valve failure.
Ø 17,40 (0.685)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-123
SV11-10-3/3M - Solenoid valve
3-way, 2-position, spool type solenoid valve
Up to 23 L/min (6 USgpm) • 350 bar (5000 psi)
A 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 1 to port working parts to limit leakage.
port 2 to 1 while port 3 is 3 while port 2 is blocked. IP69K Tough coil compatibility.
1 3 blocked. Continuously rated. Compact
design with low Pressure drop.
Rated pressure on all ports.
Working pressure 350 bar.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical Application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated Flow 23L/min (6 USgpm)
Internal leakage, port 2 to port 1 164 cm3/min (10 in3/min) max at 350 bar (5000 psi)
Temperature range -40° to 100° C (-40° to 212° F)
Coil Duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-3
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight Cartridge only 0,19 kg (0.42 lbs)
3 Seal kit 889624 (Buna-N) 889628 (Viton®)
Viton is a registered trademark of E.I. DuPont
A 9
125
Pressure - bar
Pressure - psi
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-124 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV11-10-3/3M - Solenoid valve
3-way, 2-position, spool type solenoid valve
Up to 23 L/min (6 USgpm) • 350 bar (5000 psi)
Ø 38,9
(1.53) 57.1
22.2 (2.25) 22.2
22,2 (0.875) hex (0.87) (0.87)
3
63.2 2X7,14
19.1 2 (0.281) 76.2
(2.50) (300)
(0.75)
57,8 35.1
1 (1.39)
(2.28)
44.4 9.5 57.15
(1.75) (0.38) (2.250)
25,4 76.2
(1.00) (300)
hex 0.875" –
14 Thd.
Warning
46,0
(1.81) 3 Maintain 5-8 Nm (4-6 ft. lbs)
maximum torque on valve tube nut.
2 Ø 15,82
(.623) Over tightening may cause
Ø 17,42 valve failure.
1 (.686)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-125
SV11A/B-10-3 - Solenoid valve
3-way, 2-position, spool type solenoid valve
Up to 23 L/min (6 USgpm) • 350 bar (5000 psi)
A 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 3 to port working parts to limit leakage.
port 1 to 2 while port 3 is 1 while port 2 is blocked. IP69K Tough coil compatibility.
1 3 blocked. Continuously rated. Compact
design with low Pressure drop.
Rated pressure on all ports.
Working pressure 350 bar.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports except port 1) 350 bar (5000 psi)
Typical application pressure at port 1 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow SV11A-10-3 17 L/min (5 USgpm)
SV11B-10-3 23 L/min (6 USgpm)
Internal leakage 350 cc/min (21 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuos from 85% to 110% of nominal voltage
Cavity C-10-3
Fluids MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Steel
Weight including coil SV11A-10-3 0.42 kg (0.92 lbs)
SV11B-10-3
3 Seal kit Buna-N), (Viton®)
Viton is a registered trademark of E.I. DuPont
2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-126 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV11A/B-10-3 - Solenoid valve
3-way, 2-position, spool type solenoid valve
Up to 23 L/min (6 USgpm) • 350 bar (5000 psi)
Dimensions Torque cartridge in aluminum Torque cartridge in steel Note: When solenoid vale is
housing 47-54 Nm (35-40 ft. lbs) housing 68-75 Nm (50-55 ft. lbs) ordered as Cartridge only,
mm (inch) coil nut is included.
48.7
[1.92] 84.9
(3.34)
∅ 43.5
87.5 [1.71]
[3.44] 3 51.6
108 2 (2.03)
(4.25)
28.7 82.55
(1.13) (3.250)
25.4 [1.00] HEX.
1
7/8 - 14 UNF - 2A THD.
25.4 25.4
(1.00) 76.2
(1.00)
(3.50)
3
46 88.9
[1.81] (3.50)
2
1
∅ 15.78 - 15.82 Warning Warning
∅ 17.38 - 17.42 [.621 - .623]
[.684 - .686]
Aluminum housings can be Maintain 2.5-3 Nm (1.8-2.2 ft. lbs)
used for pressures up to 210 bar maximum torque on valve tube nut.
(3000 psi). Steel housings must Over tightening may cause valve
be used for operating pressures failure.
above 210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-127
SV4-10-3/3P/3S - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
A 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 2 to port working parts to limit leakage.
port 2 to 1 while port 3 is 3 while port 1 is blocked. IP69K Tough coil compatibility.
1 3 blocked. Continuously rated. Compact
design with low Pressure drop.
Rated pressure on all ports.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure 210 bar (3000 psi)*
*Flow from P1 to P2 must be less than 7,6 L/min (2 USgpm)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Max. flow port 1 to port 2-10 L/min (2.5 USgpm)
Internal leakage 164 cm3/min (10 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
3
Weight including coil 0,42 kg (0.93 lbs)
Seal kit 889624 (Buna-N), 889628 (Viton®)
2 Viton is a registered trademark of E.I. DuPont
0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-128 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV4-10-3/3P/3S - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
4 Style
9 Special features
3 - 3-way, 2 position 7 Voltage rating
00 - None
00 - No coil 24A - 24VAC
(Only required if valve has Special features,
12D - 12VDC 115A - 115VAC omitted if “00.”)
5 Manual override option
Blank - No manual override 24D - 24VDC 230A - 230VAC Note: Use J series, 23 W coils
with this solenoid valve.
M - Manual override 36D - 36VDC 12B - 12VDC/w diode*
P - Push type 24B - 24VDC/w diode*
S - Screw type *Optional arc suppression diode.
For valve dimensions with Manual override
option installed see page A-980.
46,0 3
(1.81)
Warning Warning
Maintain 5-8 Nm (4-6 ft lbs) Flow from port 1 to port 2
2
maximum torque on valve must be less than 7,6 L/min
tube nut. (2 USgpm).
1
Ø 15,82 (0.622) Over tightening may cause
Ø 17,40 (0.685) valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-129
SV1M-12-3 - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 34 L/min (9 USgpm) • 210 bar (3000 psi)
A 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 3 to port working parts to limit leakage.
port 1 to 2 while port 3 is 1 while port 2 is blocked. IP69K Large ToughCoil
1 3 blocked. compatibility. Continuously
rated. Compact design with
low Pressure drop. Rated
pressure on all ports.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 42 L/min (11 USgpm) Max flow port 1 to port 2-34 L/min (9 USgpm)
Internal leakage 300 cm3/min (21.5 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-12-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,86 kg (1.9 lbs)
Seal kit 9900171-000 (Buna-N), 9900172-000 (Viton®)
3 Viton is a registered trademark of E.I. DuPont
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-130 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV1M-12-3 - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 34 L/min (9 USgpm) • 210 bar (3000 psi)
50,3
48,7 (1.98)
(1.92) 84.9
(3.34)
1.25” 1.25”
HEX HEX
1.062” -
12 Thread
23,8
3
(.94) 67,8 (2.67) Warning
2 22,2 Maintain 2.5-3 Nm (1.8-2.2 ft
(.87) lbs) maximum torque on valve
1 tube nut. Over tightening may
cause valve failure.
SV1A-12-3 SV1B-12-3
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-131
SV11M-12-3 - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 42 L/min (11 USgpm) • 350 bar (5000 psi)
A 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 3 to port 1 working parts to limit leakage.
port 1 to 2 while port 3 is while port 2 is blocked. IP69K Large ToughCoil
1 3 blocked. compatibility. Continuously
rated. Compact design with
low Pressure drop. Rated
pressure on all ports. Working
pressure 350 bar.
Sectional view
Performance data
Ratings and specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports except port 1) 350 bar (5000 psi)
Typical application pressure at port 1 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 42 L/min (11 USgpm)
Max. flow port 1 to port 2 - 34 L/min (9 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuos from 85% to 110% of nominal voltage
Cavity C-12-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
3 Standard housing materials Steel
Weight including coil 0.86 kg (1.9 lbs)
2 Seal kit 9900171-000 Buna-N), 9900172-000 (Viton®)
Viton is a registered trademark of E.I. DuPont
100
needed.
6
80
5
60 4
B
40 3
2
20
1
0
0 1 2 3 4 5 6 7 8 9 10
Flow - USgpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-132 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV11M-12-3 - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 42 L/min (11 USgpm) • 350 bar (5000 psi)
Dimensions Torque cartridge in aluminum Torque cartridge in steel Note: When solenoid vale is
mm (inch) housing 81-95 Nm (60-70 ft. lbs) housing 102-115 Nm ordered as Cartridge only,
(75-85 ft. lbs) coil nut is included.
1.25” 1.25”
HEX HEX
1.062” -
Warning Warning
12 Thread Maintain 2.5-3 Nm (1.8-2.2 ft Aluminum housings can be
23,8 lbs) maximum torque on valve used for pressures up to 210
3 tube nut. Over tightening may bar (3000 psi). Steel housings
(.94) 67,8 (2.67)
cause valve failure. must be used for operating
2 22,2 pressures above 210 bar
(.87)
(3000 psi).
1
SV1A-12-3 SV1B-12-3
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-133
SV2M-12-3P - Solenoid valve
3-way, 2-position, spool type solenoid valve
Up to 34 L/min (9 USgpm) • 210 bar (3000 psi)
A 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 2 to port working parts to limit leakage.
port 1 to 3 while port 2 is 1 while port 3 is blocked. IP69K Large ToughCoil
3 1 blocked. compatibility. Continuously
rated. Compact design with
low Pressure drop. Rated
pressure on all ports.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 38 L/min (10 USgpm) Max flow port 1 to port 3-34 L/min (9 USgpm)
Internal leakage 300 cm3/min (21.5 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-12-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,86 kg (1.9 lbs)
Seal kit 9900171-000 (Buna-N), 9900172-000 (Viton®)
3
Viton is a registered trademark of E.I. DuPont
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-134 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV2M-12-3P - Solenoid valve
3-way, 2-position, spool type solenoid valve
Up to 34 L/min (9 USgpm) • 210 bar (3000 psi)
50,3
48,7 (1.98)
(1.92) 84.9
(3.34)
1.25” 1.25”
HEX HEX
1.062” -
12 Thread
23,8
3
(.94) 67,8 (2.67) Warning
2 22,2 Maintain 2.5-3 Nm (1.8-2.2 ft
(.87) lbs) maximum torque on valve
1 tube nut. Over tightening
may cause valve failure.
SV2A-12-3 SV2B-12-3
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-135
SV12M-12-3 - Solenoid valve
3-way, 2-position, spool type solenoid valve
Up to 34 L/min (9 USgpm) • 350 bar (5000 psi)
A 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 2 to port working parts to limit leakage.
port 1 to 3 while port 2 is 1 while port 3 is blocked. IP69K Large ToughCoil
3 1 blocked. compatibility. Continuously
rated. Compact design with
low Pressure drop. Rated
pressure on all ports. Working
pressure 350 bar.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports except port 1) 350 bar (5000 psi)
Typical application pressure at port 1 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 38 L/min (10 USgpm)
Max. flow port 1 to port 3 - 34 L/min (9 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuos from 85% to 110% of nominal voltage
Cavity C-12-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Steel
3
Weight including coil 0.86 kg (1.9 lbs)
Seal kit 9900171-000 Buna-N), 9900172-000 (Viton®)
2
Viton is a registered trademark of E.I. DuPont
6
80
5
60
4
B
40 3
2
20
1
0
0 1 2 3 4 5 6 7 8 9
Flow - USgpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-136 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV12M-12-3 - Solenoid valve
3-way, 2-position, spool type solenoid valve
Up to 34 L/min (9 USgpm) • 350 bar (5000 psi)
Dimensions Torque cartridge in aluminum Torque cartridge in steel housing Note: When solenoid vale is
housing 81-95 Nm (60-70 ft. lbs) 102-115 Nm (75-85 ft. lbs) ordered as Cartridge only, coil nut
mm (inch) is included.
1.25” 1.25”
HEX HEX
1.062” -
12 Thread
3
23,8 Warning Warning
(.94) 67,8 (2.67) Aluminum housings can be
Maintain 2.5-3 Nm (1.8-2.2 ft.
22,2 lbs) maximum torque on valve used for pressures up to 210
2
(.87) tube nut. Over tightening may bar (3000 psi). Steel housings
cause valve failure. must be used for operating
1 pressures above 210 bar
SV2A-12-3 SV2B-12-3 (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-137
SV4M-12-3P - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 42 L/min (11 USgpm) • 210 bar (3000 psi)
A 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from port is allowed from port 2 to port working parts to limit leakage.
2 to 1 while port 3 is blocked. 3 while port 1 is blocked. IP69K Large ToughCoil
1 3
compatibility. Continuously
rated. Compact design with
low Pressure drop. Rated
pressure on all ports.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 42 L/min (11 USgpm)
Internal leakage 300 cm3/min (21.5 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-12-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,86 kg (1.9 lbs)
Seal kit 9900171-000 (Buna-N), 9900172-000 (Viton®)
3
Viton is a registered trademark of E.I. DuPont
2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-138 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV4M-12-3P - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 42 L/min (11 USgpm) • 210 bar (3000 psi)
50,3
48,7 (1.98)
(1.92) 84.8 31.7
(3.34) (1.25) Hex
1.25” 1.25”
HEX HEX
1.062” -
12 Thread
23,8
3
(.94) 67,8 (2.67)
Warning
Maintain 2.5-3 Nm (1.8-2.2 ft
22,2
2 lbs) maximum torque on valve
(.87)
tube nut. Over tightening may
1 cause valve failure.
SV4A-12-3 SV4B-12-3
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-139
SV14M-12-3 - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 42 L/min (11 USgpm) • 350 bar (5000 psi)
A 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from port is allowed from port 2 to port working parts to limit leakage.
1 to 3 while port 2 is blocked. 1 while port 3 is blocked. IP69K Large ToughCoil
1 3 compatibility. Continuously
rated. Compact design with
low Pressure drop. Rated
pressure on all ports. Working
pressure 350 bar.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports except port 1) 350 bar (5000 psi)
Typical application pressure at port 1 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 42 L/min (11 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuos from 85% to 110% of nominal voltage
Cavity C-12-3
Fluids All general purpose hydraulic fluids such as
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Steel
3
Weight including coil 0.86 kg (1.9 lbs)
2 Seal kit 9900171-000 Buna-N), 9900172-000 (Viton®)
Viton is a registered trademark of E.I. DuPont
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-140 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV14A/B-12-3 - Solenoid valve
3-way, 2-position spool type solenoid valve
Up to 42 L/min (11 USgpm) • 350 bar (5000 psi)
Dimensions Torque cartridge in aluminum Torque cartridge in steel housing Note: When solenoid vale is
housing 81-95 Nm (60-70 ft. lbs) 102-115 Nm (75-85 ft. lbs) ordered as Cartridge only,
mm (inch) coil nut is included.
1.25” 1.25”
HEX HEX
1.062” -
12 Thread Warning Warning
23,8 Maintain 2.5-3 Nm (1.8-2.2 ft. Aluminum housings can be
3
(.94) 67,8 (2.67) lbs) maximum torque on valve used for pressures up to 210
22,2 tube nut. Over tightening may bar (3000 psi). Steel housings
2
(.87) cause valve failure. must be used for operating
pressures above 210 bar
1 (3000 psi).
SV4A-12-3 SV4B-12-3
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-141
SV1-8-4/4M - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 11 L/min (3 USgpm) • 210 bar (3000 psi)
A 4 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 3 to port working parts to limit leakage.
port 4 to port 1 and from port 4 and from port 2 to port 1. IP69K Tough coil compatibility.
1 3 3 to port 2. Continuously rated. Compact
design with low Pressure
drop. Rated pressure on all
ports.
Sectional view Performance data
Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 11 L/min (3 USgpm)
Internal leakage (per land) 82 cm3/min (5 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
4 Weight including coil 0,31 kg (0.69 lbs)
Seal kit 02-160757 (Buna-N), 02-160758 (Viton®)
3 Viton is a registered trademark of E.I. DuPont
12
150
8
100
A B
50 4
C
0 0
0 1 2 3
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-142 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV1-8-4/4M - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 11 L/min (3 USgpm) • 210 bar (3000 psi)
Ø 31,7 19.1
50.8
(1.25) 19.1 (2.00) 15.5 (0.75)
(0.75) (0.61)
0.750" – 16 Thd.
4
54,6 Warning
(2.15)
3 Maintain 5-8 Nm (4-6 ft lbs)
maximum torque on valve
2 tube nut.
Over tightening may cause
1 valve failure.
Ø 12,62 (0.497)
Ø 14,20 (0.559)
Ø 15,80 (0.622)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-143
SV11-8-4/4M - Solenoid valve
4-way, 2-position spool type solenoid valve
Up to 11 L/min (3 USgpm) • 350 bar (5000 psi)
A 4 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 3 to port 4 working parts to limit leakage.
port 4 to port 1 and from port and from port 2 to port 1 IP69K Tough coil compatibility.
1 3 3 to port 2. Continuously rated. Compact
design with low Pressure drop.
Rated pressure on all ports.
Working pressure 350 bar.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 11 L/min (3 USgpm)
Internal leakage (per land) 82 cm3/min (5 in3/min) max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
4
Weight including coil 0,14 kg (0.30 lbs)
Seal kit 02-160757 (Buna-N), 02-160758 (Viton®)
3
Viton is a registered trademark of E.I. DuPont
Pressure - bar
Pressure - psi
A 6
75 3000 210
B B
4 140
50 2000
C 2
25 1000 70
0 0 0
0
0 0.5 1.0 1.5 2.0 2.5 3.0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Flow - USgpm (105 SUS oil @ 120°F) Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-144 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV11-8-4/4M - Solenoid valve
4-way, 2-position spool type solenoid valve
Up to 11 L/min (3 USgpm) • 350 bar (5000 psi)
Dimensions 26,0
Torque cartridge in steel or Note: When solenoid valve is
aluminum housing 34-41 Nm ordered as Cartridge only, nut
mm (inch) (1.02) is included.
(25-30 ft lbs)
Cartridge only Installation drawing
Ø 31,7
(1.25) 19.1
50.8 (0.75)
19.1 (2.00) 15.5
19,0 (0.75) (0.61)
(0.75)
hex 3
73 4
29.8 (2.88) 7.14
(1.17) 82.6 2 (0.281)
50.8 (3.25) 44.0
1 (1.73)
(2.00) 22,2 38.1
(0.87) (1.500)
3.20 57.15
hex (0.13) (2.250) 2-Slots
0.750"–
16 Thd.
Warning
4 Maintain 5-8 Nm (4-6 ft lbs)
54,5
maximum torque on valve
(2.15) tube nut. Over tightening may
3 cause valve failure.
Ø 12,6
2 (0.500)
Ø 14,2
Ø 15,8 (0.559)
1 (0.622)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-145
SV2-8-4/4M - Solenoid valve
4-way, 2-position spool type solenoid valve
Up to 13 L/min (4 USgpm) • 210 bar (3000 psi)
A 4 2 Operation Features
In the de-energized position all In the energized position flow Hardened, ground and honed
ports are blocked. is allowed from port 3 to port 4 working parts to limit leakage.
and from port 2 to port 1 IP69K Tough coil compatibility.
1 3 Continuously rated. Compact
design with low Pressure drop.
Rated pressure on all ports..
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 13 L/min (4 USgpm)
Internal leakage 82 cm3/min (5 in3/min) max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Response times (100% rated voltage and flow) Energize: 21 ms
De-Energize: 42 ms
Cavity C-8-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
4
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
3 Weight including coil 0,30 kg (0.66 lbs)
Seal kit 02-160757 (Buna-N), 02-160758 (Viton®)
2 Viton is a registered trademark of E.I. DuPont
16
200
150 12
100 8
A
B 4
50
0 0
0 1 2 3 4
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to port 4
B - Port 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-146 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV2-8-4/4M - Solenoid valve
4-way, 2-position spool type solenoid valve
Up to 13 L/min (4 USgpm) • 210 bar (3000 psi)
50.8 19.1
19.1 (2.00) 15.5 (0.75)
(0.75) (0.61)
Ø 31,7
(1.25) 3 4
73
29.8 (2.88) 7.14
19,0 (0.75) hex (1.17) 82.6 2 (0.281)
(3.25) 44.0
1 (1.73)
50,8
38.1
(2.00)
(1.500)
3.20 57.15
(0.13) (2.250) 2-Slots
22,2 (0.87) hex
0.750”– 16 Thd.
4
54,6 Warning
(2.15) 3
Maintain 5-8 Nm (4-6 ft lbs)
2 maximum torque on valve
tube nut. Over tightening may
Ø 12,62 (0.497) cause valve failure.
Ø 14,20 (0.559) 1
Ø 15,80 (0.622)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-147
SV12-8-4/4M - Solenoid valve
4-way, 2-position spool type solenoid valve
Up to 11 L/min (3 USgpm) • 350 bar (5000 psi)
A 4 2 Operation Features
In the de-energized position all In the energized position flow Hardened, ground and honed
ports are blocked. is allowed from port 3 to port 4 working parts to limit leakage.
and from port 2 to port 1. IP69K Tough coil compatibility.
1 3 Continuously rated. Compact
design with low Pressure drop.
Rated pressure on all ports.
Working pressure 350 bar.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 11 L/min (3 USgpm)
Internal leakage, port 2 to port 1 82 cm3/min (5 in3/min) max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-4
All general purpose hydraulic fluids such as:
Fluids MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
4 Housing material (standard) Steel
Weight - Cartridge only 0,14 kg (0.30 lbs)
3 Seal kit 02-160757 (Buna-N), 02-160758 (Viton®)
Viton is a registered trademark of E.I. DuPont
Pressure - bar
Pressure - psi
A 6
75 3000 210
4 140
50 2000
B B
25 2 70
1000
0 0 0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 0 0.5 1.0 1.5 2.0 2.5 3.0
Flow - USgpm (105 SUS oil @ 120°F) Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-148 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV12-8-4/4M - Solenoid valve
4-way, 2-position spool type solenoid valve
Up to 11 L/min (3 USgpm) • 350 bar (5000 psi)
19.1
50.8 (0.75)
19.1 (2.00) 15.5
Ø 38,9 (0.75) (0.61)
(1.53)
3 4
19,0 73
(0.75) 29.8 (2.88) 7.14
(1.17) 82.6 2 (0.281)
hex (3.25) 44.0
1 (1.73)
22,2 38.1
50.8 (1.500)
(0.87) 3.20 57.15
(2.00) hex (0.13) (2.250) 2-Slots
0.750”
– 16 Thd.
Warning
4 Maintain 5-8 Nm (4-6 ft lbs)
54,5 maximum torque on valve
(2.15) Ø 12,6 tube nut. Over tightening may
3 (0.500)
Ø 14,2 cause valve failure.
2 (0.559)
Ø 15,8
1 (0.622)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-149
SV1-10-4/4M/4R - Solenoid valve
4-way, 2-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
A 4 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 3 to port 4 working parts to limit leakage.
port 4 to port 1 and from port and from port 2 to port 1 IP69K Tough coil compatibility.
1 3 3 to port 2. Continuously rated. Compact
design with low Pressure drop.
Rated pressure on all ports.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 164 cm3/min (10 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
4 Housing material (standard) Aluminum
Weight including coil 0,44 kg (0.96 lbs)
3 Seal kit 889625 (Buna-N), 566080 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
A
60 4
B
45 3
30 2
15 1
0 0
0 2 4 6
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 4 to port 1
B - Port 3 to port 2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-150 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV1-10-4/4M/4R - Solenoid valve
4-way, 2-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
Dimensions Torque cartridge in aluminum Note: When solenoid valve is Note: Use J series 23W coils with
housing 47-54 Nm (33-46 ft lbs) ordered as Cartridge only, nut this solenoid valve.
mm (inch) is included.
57.1
25.4 (2.25) 20.8 25.4
(1.00) (0.82) (1.00)
36.7 4
Ø 38,9 (1.44) 76.2 3 52.6
(1.53) (3.00) (2.07)
88.9 2 7.14
19,0 (0.75) hex (3.50) (0.281)
1
9.5 57.15
(0.38) (2.250) 2-Slots
76.2
(3.00)
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-151
S542 - Solenoid valve
4-way, 2-position spool type solenoid valve
Up to 35 L/min (9 USgpm) • 210 bar (3000 psi)
Pressure - bar
2-1
be reversed. 3-4 AND 2-1
215 15 2175 150
0 0 0 0
0 2.6 5.2 7.8 10.4 0 1.3 3.9 6.5 9.1
Flow - US gpm Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-152 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
S542 - Solenoid valve
4-way, 2-position spool type solenoid valve
Up to 35 L/min (9 USgpm) • 210 bar (3000 psi)
5 Voltage
3 Manual Override
12 - 12 VDC
2 - Screw
(Consult factory for availability).
24 - 24 VDC
See page A-960 110 - 110 VAC
220 - 220 VAC
Dimensions
mm (inch)
49.00 (1.90)
21.00 35.50
(0.82) (1.40)
34.50 18.50
(1.36) (0.73)
4
50.50
3 73.20 (1.99)
(2.88) 82.60
66.00 50.0 (3.25)
(2.60) (1.97) 2 holes Ø7.1 2
1
(0.28) thro’
16.00
31.80 (1.25) (0.63)
50.80 31.80 (1.25)
25.40 A/F 6.35 (0.25) (2.00)
8.30
7/8”-14- (0.33)
UNF-2A
4
62.50
(2.46) 3
Ø15.80 (0.62) 1
Ø17.40 (0.69)
Ø19.00 (0.75)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-153
SV11-10-4/4M - Solenoid valve
4-way, 2-position, spool type solenoid valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
A 4 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from is allowed from port 3 to port working parts to limit leakage.
port 4 to port 1 and from port 4 and from port 2 to port 1. IP69K Tough coil compatibility.
1 3 3 to port 2. Continuously rated. Compact
design with low Pressure drop.
Rated pressure on all ports.
Working pressure 350 bar.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage, port 2 to port 1 82 cm3/min. (5 in3/min) max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
4
Housing material (standard) Steel
Weight Cartridge only 0,21 kg (0.46 lbs)
3
Seal kit 889625 (Buna-N), 566080 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
A
100 7
75 5
B
50 3
25
1
0
0 2 4 6
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to port 2
B - Port 4 to port 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-154 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV11-10-4/4M - Solenoid valve
4-way, 2-position, spool type solenoid valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
1
25,4 9.5 57.15
(1.00) (0.38) (2.250) 2-Slots
hex 76.2
0.875" – 14 Thd. (3.00)
4
61,8 Warning
(2.43) 3 Maintain 5-8 Nm (4-6 ft lbs)
maximum torque on valve
2 tube nut. Over tightening
Ø 16,0 (.63) may cause valve failure.
Ø 17,6 (.70)
1 Ø 19,2 (.76)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-155
S541 - Solenoid valve
4-way, 2-position spool type solenoid valve
Up to 30 L/min (8 USgpm) • 210 bar (3000 psi)
2-1 OR 2-1
where a double acting actuator 181 12.5
needs to be isolated. 3-4 2900 200
Pressure - psi
Pressure - bar
145 10.0
2175 150
109 7.5
1450 100
72 5.0
2-1 3-4
36 2.5 725 50
0 0 0 0
0 1 2 3 4 5 6 7 8 0 2.6 5.2 7.8 10.4
Flow - US gpm Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-156 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
S541 - Solenoid valve
4-way, 2-position spool type solenoid valve
Up to 30 L/min (8 USgpm) • 210 bar (3000 psi)
5 Voltage
3 Manual Override 12 - 12 VDC
2 - Screw 24 - 24 VDC
(Consult factory for availability). 110 - 110 VAC
See page A-960.
220 - 220 VAC
Dimensions
mm (inch)
63.50
(2.50)
49.00 (1.90)
21.00 35.50
(0.82) (1.40)
34.50 18.50
(1.36) (0.73)
4
50.50
3 73.20 (1.99)
(2.88) 82.60
66.00 50.0 (3.25)
(2.60) (1.97) 2 holes Ø7.1 2
1
(0.28) thro’
16.00
31.80 (1.25) (0.63)
50.80 31.80 (1.25)
25.40 A/F 6.35 (0.25) (2.00)
8.30
7/8”-14- (0.33)
UNF-2A
4
62.50
(2.46) 3
Ø15.80 (0.62) 1
Ø17.40 (0.69)
Ø19.00 (0.75)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-157
SV2-10-4/4M/4R - Solenoid valve
4-way, 2-position, spool type solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
A 4 2 Operation Features
In the de-energized position all In the energized position flow Hardened, ground and honed
ports are blocked. is allowed from port 3 to port 4 working parts to limit leakage.
and from port 2 to port 1. IP69K Tough coil compatibility.
1 3 Continuously rated. Compact
design with low Pressure drop.
Rated pressure on all ports.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 164 cm3/min (10 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
4 Housing material (standard) Aluminum
Weight including coil 0,44 kg (0.96 lbs)
3 Seal kit 889625 (Buna-N), 566080 (Viton®)
Viton is a registered trademark of E.I. DuPont
5
60
4
45
3
A B
30 2
15 1
0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to port 4
B - Port 1 to port 2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-158 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV2-10-4/4M/4R - Solenoid valve
4-way, 2-position, spool type solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
57.1
25.4 (2.25) 20.8 25.4
Ø 38,9 (1.00) (0.82) (1.00)
(1.53) 4
36.7
(1.44) 76.2 3 52.6
19,0 (0.75) hex (3.00) (2.07)
88.9 2 7.14
(3.50) (0.281)
1
57,1 57.15
9.5
(2.25) (0.38) (2.250) 2-Slots
76.2
(3.00)
25,4 (1.00) hex
0.875" – 14 Thd.
4
62,0 Warning
(2.44) Maintain 5-8 Nm (4-6 ft lbs)
3
maximum torque on valve
tube nut.
2
Over tightening may cause
valve failure.
1
Ø 15,80 (0.622)
Ø 17,40 (0.685)
Ø 18,97 (0.747)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-159
SV3-10-4/4M/4R - Solenoid valve
4-way, 2-position, spool type solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
A 4 2 Operation Features
In the de-energized position In the energized position all Hardened, ground and honed
flow is allowed from port 3 to ports are blocked. working parts to limit leakage.
port 4 and from port 2 to port 1. IP69K Tough coil compatibility.
1 3 Continuously rated. Compact
design with low Pressure drop.
Rated pressure on all ports.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 164 cm3/min (10 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
4
Weight including coil 0,44 kg (0.96 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton®)
3
Viton is a registered trademark of E.I. DuPont
5
60
4
45
3
A B
30 2
15 1
0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to port 4
B - Port 1 to port 2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-160 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV3-10-4/4M/4R - Solenoid valve
4-way, 2-position, spool type solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
57.1
25.4 (2.25) 20.8 25.4
(1.00) (0.82) (1.00)
Ø 38,9
(1.53) 36.7 4
(1.44) 76.2 3 52.6
19,0 (0.75) hex (3.00) (2.07)
88.9 2 7.14
(3.50) (0.281)
1
57,1 9.5 57.15
(2.25) (0.38) (2.250) 2-Slots
76.2
(3.00)
25,4 (1.00) hex
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-161
SV4-10-4/4M/4R - Solenoid valve
4-way, 2-position, spool type solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
A 4 2 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
flow is allowed from port 1 is allowed from port 1 to port working parts to limit leakage.
to port 4. Port 2 - port 3 is 2, and from port 3 to port 4. IP69K Tough coil compatibility.
1 3 blocked. Continuously rated. Compact
design with low Pressure drop.
Rated pressure on all ports.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 164 cm3/min (10 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
4
Weight including coil 0,44 kg (0.96 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton®)
3
Viton is a registered trademark of E.I. DuPont
5
valve to ensure the pilot line is 60
drained to tank. 4
45
3
A B
30 2
15 1
0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to port 4
B - Port 1 to port 2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-162 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV4-10-4/4M/4R - Solenoid valve
4-way, 2-position, spool type solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
57.1
25.4 (2.25) 20.8 25.4
(1.00) (0.82) (1.00)
Ø 38,9
(1.53) 36.7 4
(1.44) 76.2 3 52.6
19,0 (0.75) hex (3.00) (2.07)
88.9 2 7.14
(3.50) (0.281)
1
57,1 9.5 57.15
(2.25) (0.38) (2.250) 2-Slots
76.2
(3.00)
25,4 (1.00) hex
0.875" – 14 Thd.
4
62,0
(2.44)
3 Warning
Maintain 5-8 Nm (4-6 ft lbs)
2 maximum torque on valve
tube nut.
Ø 15,80 (0.622) 1
Over tightening may cause
Ø 17,40 (0.685) valve failure.
Ø 18,97 (0.747)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-163
SV5-10-4/4M/4R - Solenoid valve
4-way, 2-position, spool type solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
A 4 2 Operation Features
In the de-energized position all In the energized position flow Hardened, ground and honed
ports are blocked. is allowed from port 3 to port 2 working parts to limit leakage.
and from port 4 to port 1. IP69K Tough coil compatibility.
1 3 Continuously rated. Compact
design with low Pressure drop.
Rated pressure on all ports.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 164 cm3/min (10 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
4
Weight including coil 0,44 kg (0.96 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton®)
3 Viton is a registered trademark of E.I. DuPont
60 4
A
45 3
B
30 2
15 1
0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 1 to port 4
B - Port 3 to port 2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-164 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV5-10-4/4M/4R - Solenoid valve
4-way, 2-position, spool type solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-165
SV7-10-4/4P/4S - Solenoid valve
4-way, 2-position, spool type solenoid valve
17 L/min (5 USgpm) • 210 bar (3000 psi)
A 2 4 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow from port is allowed from port 3 to port 2 working parts to limit leakage.
3 to port 4 and from port 2 to and from port 4 to port 1. IP69K Tough coil compatibility.
3 1 port 1. Continuously rated. Compact
design with low Pressure drop.
Rated pressure on all ports.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 17 L/min (5 USgpm)
Internal leakage 164 cm3/min (10 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
4
Weight including coil 0,44 kg (0.96 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton®)
3
Viton is a registered trademark of E.I. DuPont
A
60 4
B
45 3
C
30 2
D
15 1
0
0 1 2 3 4 5
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-166 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV7-10-4/4P/4S - Solenoid valve
4-way, 2-position, spool type solenoid valve
17 L/min (5 USgpm) • 210 bar (3000 psi)
70.39
(2.77)
25.4 20.8 25.4
Ø 38,9 (1.00) (0.82) (1.00)
(1.53)
36.7 4
(1.44) 76.2 3 52.6
19,0 (0.75) hex (3.00) (2.07)
88.9 2 7.14
(3.50) (0.281)
69,8 1
(2.75) 9.5 57.15
(0.38) (2.250) 2-Slots
76.2
(3.00)
25,4 (1.00) hex
0.875" – 14 Thd.
4
62,0
Warning
(2.44) Maintain 5-8 Nm (4-6 ft lbs)
3
maximum torque on valve
tube nut. Over tightening may
2 cause valve failure.
Ø 15,80 (0.622) 1
Ø 17,40 (0.685)
Ø 18,97 (0.747)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-167
SV17M-10-4P - Solenoid valve
4-way, 2-position, spool type solenoid valve
17 L/min (5 USgpm) • 350 bar (5000 psi)
A 2 4 Operation Features
In the de-energized position this In the energized position flow is Hardened, ground and honed
valve allows flow between port allowed between port 3 to port working parts to limit leakage.
3 to port 4 and between port 2 2 and between port 4 to port 1in IP69K Large ToughCoil
3 1 to port 1 in both directions. both directions. compatibility. Continuously
rated. Compact design with
low Pressure drop. Rated
pressure on all ports. Working
pressure 350 bar.
Sectional view Performance data
Ratings and specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports except port 1) 350 bar (5000 psi)
Typical application pressure at port 1 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 17 L/min (5 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuos from 85% to 110% of nominal voltage
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
4 Standard housing materials Steel
Weight including coil 0.44 kg (0.96 lbs)
3 Seal kit 889625 Buna-N), 566080 (Viton®
Viton is a registered trademark of E.I. DuPont
2
Pressure - bar
100 7
B
80
60
C 3
40
20
0
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5
Flow - USgpm (105 SUS oil @ 120 F) 0
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-168 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV17M-10-4P - Solenoid valve
4-way, 2-position, spool type solenoid valve
17 L/min (5 USgpm) • 350 bar (5000 psi)
87.7
(3.45)
19
(0.75)
87.7 4
[3.45] 3 50.8
76.2 (2.00)
88.9 (3.00) 2
34.9 (3.50)
(1.37) 2 X Ø7.11
1 (0.280)
25.4
[1.00] HEX. 22.2
(0.87) 9.5 57.15 22.2
(2.250) (0.87)
7 / 8 - 14 UNF - 2A THD. 44.45 (0.37) 76.2
(1.750) (3.00)
48.7 1
[1.92]
62
[2.44] 2
Warning Warning
3 Aluminum housings can be
Maintain 2.5-3 Nm (1.8-2.2 ft.
∅ 43.5 lbs) maximum torque on valve used for pressures up to 210
[1.71]
1
15.78 - 15.82 tube nut. Over tightening may bar (3000 psi). Steel housings
17.38 - 17.42
[.621 - 623] cause valve failure. must be used for operating
[.684 - .686]
18.95 - 18.99
pressures above 210 bar
[.746 - .748] (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-169
SV2M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 42 L/min (11 USgpm) • 210 bar (3000 psi)
A 4 2 Operation Features
In the de-energized position all In the energized position flow Hardened, ground and honed
ports are blocked. is allowed between port 3 to working parts to limit leakage.
port 4 and between port 2 to IP69K Large ToughCoil
1 3 port 1 in both directions. compatibility. Continuously
rated. Compact design with
low Pressure drop. Rated
pressure on all ports.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 42 L/min (11 USgpm)
Internal leakage 300 cm3/min (21.5 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
4 Housing material (standard) Aluminum
Weight including coil 0,86 kg (1.9 lbs)
Seal kit 2160979 (Buna-N), 2160980 (Viton®)
3
Viton is a registered trademark of E.I. DuPont
A 5
60 4
B
40 3
2
20
1
0
0 1 2 3 4 5 6 7 8 9 10 11
Flow - USgpm
A - Port 2 to port 1
B - Port 3 to port 4
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-170 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
SV2M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 42 L/min (11 USgpm) • 210 bar (3000 psi)
48,7 50,3
(1.92) (1.98) 26.7
(1.05)
43,5 (1.71)
45,9 (1.81) 84.9
28.7 (3.34)
MANUAL MANUAL (1.13)
OVERDRIVE OVERDRIVE
Torque
Torque 22-26 LB-IN 4 51.6
22-26 LB-IN 74.4 101.6 (2.03)
3
(2.93) (04.00) 2 Slots
127 2 8.75
85,4 (3.36) (05.00) (0.344)
84,9 (3.34)
1
1.25” 1.25” 31.8 10.3 68.28 31.8
(1.25) (0.41) (02.688) (1.25)
HEX HEX 63.5 88.9
(2.500) (03.50)
1.062” - 1.062” -
12 Thread 12 Thread
4 Ø 23,8 (.935)
90,9 (3.58)
Warning
3 Ø 22,1 (.872)
Maintain 2.5-3 Nm (1.8-2.2 ft
lbs) maximum torque on valve
2 Ø 20,6 (.810) tube nut. Over tightening
may cause valve failure.
1
SV2A-12-4 SV2B-12-4
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com A-171
SV12M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 42 L/min (11 USgpm) • 350 bar (5000 psi)
4 2
A Operation Features
In the de-energized position all In the energized position flow Hardened, ground and honed
ports are blocked. is allowed between port 3 to working parts to limit leakage.
port 4 and between port 2 to IP69K Large ToughCoil
1 3 port 1 in both directions. compatibility. Continuously
rated. Compact design with
low pressure drop. Rated
pressure on all ports. Working
Performance data pressure 350 bar.
Sectional view
Ratings and specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports except port 1) 350 bar (5000 psi)
Typical application pressure at port 1 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 42 L/min (11 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuos from 85% to 110% of nominal voltage
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
4 Standard housing materials Steel
Weight including coil 0.86 kg (1.9 lbs)
3 Seal kit 2160979 Buna-N), 2160980 (Viton®)
Viton is a registered trademark of E.I. DuPont
60 B
Pressure Drop - bar
4
Pressure Drop - psi
3
40
20
1
0
0 1 2 3 4 5 6 7 8 9 10 11
Flow - USgpm
A - Port 2 to port 1
B - Port 1 to port 4
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-172 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV12M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 42 L/min (11 USgpm) • 350 bar (5000 psi)
84.9
43,5 (1.71) (3.34)
45,9 (1.81) 28.7
(1.13)
MANUAL MANUAL
OVERDRIVE OVERDRIVE
Torque 4 51.6
Torque 74.4 101.6 3 (2.03)
22-26 LB-IN 2 Slots
22-26 LB-IN (2.93) (04.00)
127 2 8.75
(05.00) (0.344)
1.062” - 1.062” -
12 Thread 12 Thread
4 Ø 23,8 (.935)
90,9 (3.58) Warning Warning
3 Ø 22,1 (.872) Aluminum housings can Maintain 2.5-3 Nm
be used for pressures up (1.8-2.2 ft lbs) maximum
to 210 bar (3000 psi). Steel torque on valve tube nut.
2 Ø 20,6 (.810) Over tightening may cause
housings must be used for
operating pressures above valve failure.
1
SV2A-12-4
210 bar (3000 psi).
SV2B-12-4
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-173
SV3M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 53 L/min (14 USgpm) • 210 bar (3000 psi)
A 4 2 Operation Features
In the de-energized position In the energized position all Hardened, ground and honed
flow is allowed from port 3 to ports are blocked. working parts to limit leakage.
port 4 and from port 2 to port 1 IP69K Large ToughCoil
1 3 in both directions. compatibility. Continuously
rated. Compact design with
low pressure drop. Rated
pressure on all ports.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 53 L/min (14 USgpm)
Internal leakage 300 cm3/min (21.5 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
4
Weight including coil 0,86 kg (1.9 lbs)
Seal kit 2160979 (Buna-N), 2160980 (Viton®)
3 Viton is a registered trademark of E.I. DuPont
120 8
100 7
6
80
5
60 B
4
40 3
2
20
1
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Flow - USgpm
A - Port 3 to port 4
B - Port 2 to port 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-174 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV3M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 53 L/min (14 USgpm) • 210 bar (3000 psi)
84.9
43,5 (1.71) 31.7 (3.34)
45,9 (1.81) 28.7 (1.25) Hex
(1.13)
MANUAL MANUAL
OVERDRIVE OVERDRIVE
Torque 4 51.6
Torque 22-26 74.4 101.6 (2.03)
3
22-26 LB-IN LB-IN (2.93) (04.00) 2 Slots
127 2 8.75
(05.00) (.344)
4 Ø 23,8 (.935)
90,9 (3.58)
3 Ø 22,1 (.872) Warning
Maintain 2.5-3 Nm
(1.8-2.2 ft lbs) maximum
2 Ø 20,6 (.810)
torque on valve tube nut.
1
Over tightening may cause
valve failure.
SV3A-12-4 SV3B-12-4
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-175
SV13M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 53 L/min (14 USgpm) • 350 bar (5000 psi)
A 4 2 Operation Features
In the de-energized position In the energized position all Hardened, ground and honed
flow is allowed from port 3 to ports are blocked. working parts to limit leakage.
port 4 and from port 2 to port 1 IP69K Large ToughCoil
1 3 in both directions . compatibility. Continuously
rated. Compact design with
low pressure drop. Rated
pressure on all ports. Working
pressure 350 bar.
Sectional view Performance data
Ratings and specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports except port 1) 350 bar (5000 psi)
Typical application pressure at port 1 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 53 L/min (14 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuos from 85% to 110% of nominal voltage
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
4
Filtration Cleanliness code 18/16/13
Standard housing materials Steel
3 Weight including coil 0.86 kg (1.9 lbs)
Seal kit 2160979 Buna-N), 2160980 (Viton®)
2 Viton is a registered trademark of E.I. DuPont
7
Pressure Drop - bar
100
Pressure Drop - psi
6
80
5
B
60
4
40 3
2
20
1
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Flow - USgpm
A - Port 3 to port 4
B - Port 2 to port 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-176 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV13M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 53 L/min (14 USgpm) • 350 bar (5000 psi)
Dimensions Torque cartridge in aluminum Torque cartridge in steel Notes: When solenoid vale is
housing 81-95 Nm housing 102-115 Nm ordered as Cartridge only, coil
mm (inch) nut is included.
(60-70 ft. lbs) (75-85 ft. lbs)
1.062” - 1.062” -
12 Thread 12 Thread
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-177
SV5M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 53 L/min (14 USgpm) • 210 bar (3000 psi)
A 4 2 Operation Features
In the de-energized position all In the energized position flow Hardened, ground and honed
ports are blocked. is allowed between port 3 to working parts to limit leakage.
port 2 and between port 4 to IP69K Large ToughCoil
1 3 port 1 in both directions. compatibility. Continuously
rated. Compact design with
low pressure drop. Rated
pressure on all ports.
Sectional view Performance data
Ratings and specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 53 L/min (14 USgpm)
Internal leakage 300 cm3/min (21.5 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
4
Weight including coil 0,86 kg (1.9 lbs)
Seal kit 2160979 (Buna-N), 2160980 (Viton®)
3
Viton is a registered trademark of E.I. DuPont
100 7
6
80
A 5
60 4
40 B 3
2
20
1
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Flow - US gpm (105 SUS Oil @ 120°F)
A - Port 3 to port 2
B - Port 4 to port 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-178 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV5M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 53 L/min (14 USgpm) • 210 bar (3000 psi)
84.9
43,5 (1.71) 31.7 (3.34)
45,9 (1.81) 28.7 (1.25) Hex
(1.13)
Manual Manual
Overdrive Overdrive 4 51.6
74.4 101.6 3 (2.03)
Torque (04.00) 2 Slots
Torque 22-26 (2.93)
LB-IN 127 2 8.75
22-26 LB-IN
(05.00) (.344)
1
84,9 (3.34) 85,4 (3.36) 31.8 10.3 68.28 31.8
(1.25) (0.41) (02.688) (1.25)
63.5 88.9
(2.500) (03.50)
1.25” 1.25”
HEX HEX
1.062” - 1.062” -
12 Thread 12 Thread
Ø 23,8 (.935) 4
90,9 (3.58) Warning
Ø 22,1 (.872) 3 Maintain 2.5-3 Nm
(1.8-2.2 ft lbs) maximum
torque on valve tube nut.
Ø 20,6 (.810) 2 Over tightening may cause
valve failure.
1
SV5A-12-4 SV5B-12-4
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-179
SV15M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 53 L/min (14 USgpm) • 350 bar (5000 psi)
A 4 2 Operation Features
In the de-energized position all In the energized position flow Hardened, ground and honed
ports are blocked. is allowed between port 3 to working parts to limit leakage.
port 2 and between port 4 to IP69K Large ToughCoil
1 3 port 1 in both directions. compatibility. Continuously
rated. Compact design with
low pressure drop. Rated
pressure on all ports. Working
pressure 350 bar.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports except port 1) 350 bar (5000 psi)
Typical application pressure at port 1 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 53 L/min (14 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuos from 85% to 110% of nominal voltage
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
4
Standard housing materials Steel
Weight including coil 0.86 kg (1.9 lbs)
3 Seal kit 2160979 Buna-N), 2160980 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
100
90 6
80 A 5
70
60 4
50 B 3
40
30 2
20
1
10
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Flow - US gpm (105 SUS Oil @ 120°F)
A - Port 3 to port 2
B - Port 4 to port 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-180 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV15M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 53 L/min (14 USgpm) • 350 bar (5000 psi)
Dimensions Torque cartridge in steel housing Torque cartridge in aluminum Note: When solenoid valve is
102-115 Nm (75-85 ft lbs) housing 81-95 Nm (60-70 ft lbs) ordered as Cartridge only, nut
mm (inch) is included.
85,4 (3.36) 1
84,9 (3.34)
31.8 10.3 68.28 31.8
(1.25) (0.41) (02.688) (1.25)
63.5 88.9
1.25” (2.500) (03.50)
1.25”
HEX HEX
1.062” - 1.062” -
12 Thread 12 Thread
Ø 23,8 (.935) 4
90,9 (3.58) Warning
Ø 22,1 (.872) 3 Maintain 2.5-3 Nm
(1.8-2.2 ft lbs) maximum
torque on valve tube nut.
Ø 20,6 (.810) 2 Over tightening may cause
valve failure.
1
SV15A-12-4 SV15B-12-4
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-181
SV7M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 46 L/min (12 USgpm) • 210 bar (3000 psi)
A 2 4 Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow between is allowed between port 3 to working parts to limit leakage.
port 3 to port 4 and between port 2 and between port 4 to IP69K Large ToughCoil
3 1 port 2 to port 1. port 1. compatibility. Continuously
rated. Compact design with
low pressure drop. Rated
pressure on all ports.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 46 L/min (12 USgpm)
Internal leakage 300 cm3/min (21.5 in3/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 8/16/13
Housing material (standard) Aluminum
4 Weight including coil 0,86 kg (1.9 lbs)
Seal kit 2160979 (Buna-N), 2160980 (Viton®)
3 Viton is a registered trademark of E.I. DuPont
7
100
6
80 5
A
60 4
B
3
40
2
20 1
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12
Flow - US gpm (105 SUS Oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-182 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV7M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 46 L/min (12 USgpm) • 210 bar (3000 psi)
84.9
43,5 (1.71) 45,9 (1.81) 31.7 (3.34)
28.7 (1.25) Hex
(1.13)
Manual Manual
Overdrive Overdrive 51.6
4
Torque 74.4 101.6 3 (2.03)
Torque 22-26 (2.93) (04.00) 2 Slots
22-26 LB-IN 2
LB-IN 127 8.75
(05.00) (.344)
1
85,4 (3.36)
84,9 (3.34) 31.8 10.3 31.8
68.28
(1.25) (0.41) (02.688) (1.25)
63.5 88.9
(2.500) (03.50)
1.25” 1.25”
HEX HEX
1.062” - 1.062” -
12 Thread 12 Thread
Ø 23,8 (.935) 4
90,9 (3.58)
Ø 22,1 (.872) 3
Warning
Ø 20,6 (.810) 2 Maintain 2.5-3 Nm
(1.8-2.2 ft lbs) maximum
1 torque on valve tube nut.
SV7A-12-4 SV7B-12-4 Over tightening may cause
valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-183
SV17M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 46 L/min (12 USgpm) • 350 bar (5000 psi)
A 2 4
Operation Features
In the de-energized position In the energized position flow Hardened, ground and honed
this valve allows flow is allowed between port 3 to working parts to limit leakage.
between port 3 to port 4 and port 2 and between port 4 to IP69K Large ToughCoil
between port 2 to port 1 in port 1in both directions. compatibility. Continuously
3 1 both directions. rated. Compact design with
low pressure drop. Rated
pressure on all ports. Working
pressure 350 bar.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports except port 1) 350 bar (5000 psi)
Typical application pressure at port 1 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 38 L/min (10 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuos from 85% to 110% of nominal voltage
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
4
Filtration Cleanliness code 18/16/13
Standard housing materials Steel
3
Weight including coil 0.68 kg (1.5 lbs)
Seal kit 2160979 Buna-N), 2160980 (Viton®)
2 Viton is a registered trademark of E.I. DuPont
100
90 6
80
A
5
70
60 B 4
50
3
40
30 2
20
1
10
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12
Flow - US gpm (105 SUS Oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-184 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV17M-12-4 - Solenoid valve
4-way, 2-position, spool type solenoid valve
Up to 46 L/min (12 USgpm) • 350 bar (5000 psi)
84.9
43,5 (1.71) 45,9 (1.81) 31.7 (3.34)
28.7 (1.25) Hex
(1.13)
Manual Manual
Overdrive Overdrive 51.6
4
Torque 74.4 101.6 3 (2.03)
Torque 22-26 (2.93) (04.00) 2 Slots
22-26 LB-IN 2
LB-IN 127 8.75
(05.00) (.344)
1
85,4 (3.36)
84,9 (3.34) 31.8 10.3 68.28 31.8
(1.25) (0.41) (02.688) (1.25)
63.5 88.9
(2.500) (03.50)
1.25” 1.25”
HEX HEX
1.062” - 1.062” -
12 Thread 12 Thread
Ø 23,8 (.935) 4
90,9 (3.58)
Ø 22,1 (.872) 3
Warning
Maintain 2.5-3 Nm
Ø 20,6 (.810) 2 (1.8-2.2 ft lbs) maximum
torque on valve tube nut.
1 Over tightening may cause
SV17A-12-4 SV17B-12-4 valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-185
SV9-8-E - Solenoid valve
4-way, 3-position, screw-in cartridge, solenoid valve
Up to 13 L/min (3.5 USgpm) • Up to 210 bar (3000 psi)
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
“Coil B” Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Fatigue pressure 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure 11,000 psi per NFPA/T2-6-1 R2-2000
Max flow 13.2 L/min (3.5 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
All general purpose hydraulic fluids such as:
“Coil A” Fluids MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing material Aluminum
Weight including coil (1.2 lbs)
4 Seal kit 02-160757 (Buna-N), 02-160758 (Viton®)
Internal leakage 164 cm3/min (10 in3/min) max. @ 210 bar (3000 psi)
3
Viton is a registered trademark of E.I. DuPont
*AC coils must be used with a rectifying connector
2 Endurance tested to 1 million cycles at full rated flow and pressure.
75
A
50 B 3
25
0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-186 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV9-8-F - Solenoid valve
4-way, 3-position, screw-in cartridge, solenoid valve
Up to 13 L/min (3.5 USgpm) • Up to 210 bar (3000 psi)
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
“Coil B”
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Fatigue pressure 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure 11,000 psi per NFPA/T2-6-1 R2-2000
Max flow 13.2 L/min (3.5 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
“Coil A” Coil power 23W
Cavity C-8-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
4 Filtration Cleanliness code 18/16/13
Standard Housing material Aluminum
3
Weight including coil (1.2 lbs)
2 Seal kit 02-160757 (Buna-N), 02-160758 (Viton®)
Internal leakage 164 cm3/min (10 in3/min) max. @ 210 bar (3000 psi)
1 Viton is a registered trademark of E.I. DuPont
Endurance tested to 1 million cycles at full rated flow and pressure.
0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 4 or port 1 de-energized
B - Port 3 to port 2 or port 4 to port 1
C - Port 2 or port 1 de-energized
D - Port 2 or 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-187
SV9-8-B - Solenoid valve
4-way, 3-position, screw-in cartridge, solenoid valve
Up to 13 L/min (3.5 USgpm) • Up to 210 bar (3000 psi)
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
“Coil B” Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Fatigue pressure 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure 11,000 psi per NFPA/T2-6-1 R2-2000
Max flow 13.2 L/min (3.5 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
“Coil A” Coil power 23W
Cavity C-8-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
4 Filtration Cleanliness code 18/16/13
Standard housing material Aluminum
3 Weight including coil (1.2 lbs)
Seal kit 02-160757 (Buna-N), 02-160758 (Viton®)
2 Internal leakage 164 cm3/min (10 in3/min) max. @ 210 bar (3000 psi)
Viton is a registered trademark of E.I. DuPont
1
Endurance tested to 1 million cycles at full rated flow and pressure.
75
A
B
50 3
C
25
0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-188 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV9-8-A - Solenoid valve
4-way, 3-position, screw-in cartridge, solenoid valve
Up to 13 L/min (3.5 USgpm) • 210 bar (3000 psi)
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
"S1" Fatigue pressure 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure 11,000 psi per NFPA/T2-6-1 R2-2000
Max flow 13.2 L/min (3.5 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
"S2" Coil power 23W
Cavity C-8-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
4 Standard housing material Aluminum
Weight including coil (1.2 lbs)
3 Seal kit 02-160757 (Buna-N), 02-160758 (Viton®)
2 Internal leakage 164 cm3/min (10 in3/min) max. @ 210 bar (3000 psi)
Viton is a registered trademark of E.I. DuPont
*AC coils must be used with a rectifying connector
1 Endurance tested to 1 million cycles at full rated flow and pressure.
25
0
0 0.5 1.0 1.5 2.0 2.5 3.0
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-189
SV9-8 - Solenoid valve
4-way, 3-position, screw-in cartridge, solenoid valve
Up to 13 L/min (3.5 USgpm) • Up to 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10 11 12
10 Coil series 1
0 - No Coil
P - 8 series, 23W
1
These model digits are not stamped on
the valve.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-190 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV9-8 - Solenoid valve
4-way, 3-position, screw-in cartridge, solenoid valve
Up to 13 L/min (3.5 USgpm) • 210 bar (3000 psi)
Warning
Maintain 5-8 Nm (4-6 ft lbs)
maximum torque on valve
tube nut. 4 4
54,6
Over tightening may cause 54,6
3 ( 2.15 ) 3 ( 2.15 )
valve failure.
2 2
1 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-191
SV9-10-A - Solenoid valve
4-way, 3-position spool type solenoid valve
Up to 19 L/min (5 USgpm) • 210 bar (3000 psi)
2(A) 4(B)
A Operation
In the de-energized position, When solenoid 2 (S2) is
this valve allows flow from energized, flow is directed
B 3(P) 1(T) A port 3 to port 1 and blocks from port 3 to port 4 and from
ports 2 and 4. When solenoid port 2 to port 1.
1 (S1) is energized, flow is
directed from port 3 to port 2
and from port 4 to port 1.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Fatigue pressure 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure (626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
"Coil A" Max flow 5 USgpm
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Coil power 23W
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0.95Kg (2.1 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton®)
Internal leakage 246 cm /min (15 in3/min) max. @ 210 bar (3000 psi)
3
70
60 A
50 B
40
30
C
20
10
0
0 1 2 3 4 5
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-192 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV9-10-B - Solenoid valve
4-way, 3-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
2(A) 4(B)
Operation A
In the de-energized position, When solenoid 2 (S2) is
all ports are open to each energized, flow is directed
other When solenoid 1 (S1) from port 3 to port 2 and from
B 3(P) 1(T) A is energized, flow is directed port 4 to port 1.
from port 3 to port 4 and from
port 2 to port 1.
Sectional view
Sectional View Performance data
Ratings and specifications
"Coil B" Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Fatigue pressure 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure (626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
"Coil A" Max flow 6 USgpm
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Coil power 26W
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0.95 Kg (2.1 lbs)
Seal kit 889625 Buna-N, 566080 (Viton®)
Internal leakage 246 cm /min (15 in3/min) max. @ 210 bar (3000 psi)
3
90
80 D - Port 2 to port 1
70 B - Port 4 to port 1
A
60
50
B C
40
D
30
E
20
10
0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-193
SV9-10-E - Solenoid valve
4-way, 3-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Fatigue pressure 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure (626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
"Coil A"
Max flow 6 USgpm
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Coil power 26W
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0.95 Kg (2.1 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton®)
Internal leakage 246 cm /min (15 in3/min) max. @ 210 bar (3000 psi)
3
70
60 A
50
40 B
30
20
10
0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-194 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV9-10-F - Solenoid valve
4-way, 3-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
140
120
100
80
60
A
40
20
B
0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-195
SV9-10 - Solenoid valve
4-way, 3-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10 11 12
1
These model digits are not stamped on
the valve.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-196 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV9-10 - Solenoid valve
Ø 38,9 Ø 38,9
(1.53) (1.53)
Manual
override
option
"Coil A"
"Coil B"
116.1 138.3
(4.57) (5.44)
"Coil A" "Coil A"
61.8 61.8
(2.43) (2.43)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-197
SV9M-10-E - Solenoid valve
4-way, 3-position spool type solenoid valve
Up to 25 L/min (6.5 USgpm) • 210 bar (3000 psi)
145 10
B
70 5
0 0
0 2.6 5.2 7.8 10.4
Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-198 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV9M-10-F - Solenoid valve
4-way, 3-position spool type solenoid valve
Up to 25 L/min (6.5 USgpm) • 210 bar (3000 psi)
Pressure - bar
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-199
SV9M-10-B - Solenoid valve
4-way, 3-position spool type solenoid valve
Up to 34 L/min (8.9 USgpm) • 210 bar (3000 psi)
Pressure - bar
A
applications where an actuator
needs to be moved in both 130 9
directions.
B
90 6
45 3
0 0
0 2.6 5.2 7.8 10.4
Flow - US gpm
A - Spool shifted port 3-2, port 3-4
and port 2-1 and port 4-1
B - Spool centered port 2 -1 and port 4-1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-200 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV9M-10-A - Solenoid valve
4-way, 3-position spool type solenoid valve
Up to 25 L/min (6.5 USgpm) • 210 bar (3000 psi)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-201
SV9M-10 - Solenoid valve
4-way, 3-position spool type solenoid valve
Up to 32 L/min (8.5 USgpm) • 210 bar (3000 psi)
54.70 18.50
(2.15) (0.73)
34.50
(1.36) 4 50.50
3 73.20 (1.99) 82.60
133.00 2 (2.88) (3.25)
(5.24) 1
2 holes Ø7.1
54.70 (0.28) thro’ 31.80 (1.25) 16.00 (0.63)
31.80
(2.15) 6.35 (0.25) 50.80 (2.00) (1.25)
27.00 A/F
12.50
(0.49)
7/8”-14-UNF-2A 4
62.50
(2.46) 3
Ø15.80 (0.62) 1
Ø17.40 (0.68)
Ø19.00 (0.75)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-202 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
SV9M-10 - Solenoid valve
4-way, 3-position spool type solenoid valve
Up to 32 L/min (8.5 USgpm) • 210 bar (3000 psi)
1
These model digits are not stamped on
the valve.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-203
S Series - Manual overrides
13 mm Tube
A S2 Series
Nut type
dependant
on valve
Manually operated position Normal position
Available for S217, S229
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-204 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
S Series - Manual overrides
16 mm tube
S5 Series A
Consult factory for availability
26.50
21.00 (1.04)
(0.83)
Nut type
dependent
on valve
Ø24.00
(0.94)
nut
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-205
Note: Manual override is available
Manual override options on all solenoid cartridge valves, Warning
except SBV series valves. The Manual override option is
Push type overrides (type P and S) intended for emergency use, not
for continuous duty operation.
49.7 49.7
(1.96) 57,9
(1.96) 70,2
(2.77)
(2.28)
8-Series – 210 bar valves 8-Series – 350 bar valves 10, 12, 16, 20-Series – 10, 12, 16, 20-Series –
210 bar valves 350 bar valves
49.7
(1.96) 57,8
49.7 70,2
(1.96) (2.28)
(2.77)
8-Series – 210 bar valves 8-Series – 350 bar valves 10, 12, 16, 20-Series – 10, 12, 16, 20-Series –
210 bar valves 350 bar valves
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A-206 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com
Note: Manual override is available
Warning on all solenoid cartridge valves, Manual override options
The Manual override option is except SBV series valves.
intended for emergency use, not Pull type overrides (type M and R)
for continuous duty operation.
57,8
(2.27)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—+BOVBSZ 2018 www.eaton.com A-207
- Additional products, product lines, and services offered by Eaton -
Proportional valves
Proportional solenoid valves for pressure and
flow control
Proportional valves
PROPORTIONAL VALVES ................................................................................................................................... B-4
PFR21H ................................................................................................................................................................ B-8
EPV10 ..................................................................................................................................................................B-10
EPV16 ..................................................................................................................................................................B-14
EPV16A ................................................................................................................................................................B-17
EPV16B ................................................................................................................................................................B-18
ESV1-8-C ........................................................................................................................................................... B-20
ESV1-10-C .......................................................................................................................................................... B-22
ESV1-12-C .......................................................................................................................................................... B-24
ESV1-8-O ........................................................................................................................................................... B-26
ESV1-10-O ......................................................................................................................................................... B-28
ESV1-12-O ......................................................................................................................................................... B-30
EFV1-10-C .......................................................................................................................................................... B-32
EFV1-12-C .......................................................................................................................................................... B-36
EFV1-10-O .......................................................................................................................................................... B-40
EFV1-12-O .......................................................................................................................................................... B-44
ESV9-8-E ........................................................................................................................................................... B-48
ESV9-8-F ............................................................................................................................................................ B-49
ESV9-8 ............................................................................................................................................................... B-50
ESV9-10 ............................................................................................................................................................. B-52
ESVL9-10-E ........................................................................................................................................................ B-53
ESVL9-10-F ........................................................................................................................................................ B-54
ESVL9-10 ........................................................................................................................................................... B-55
PFR24A .............................................................................................................................................................. B-57
EFV2-12-C .......................................................................................................................................................... B-59
EFV2-12-O .......................................................................................................................................................... B-63
PDR21A .............................................................................................................................................................. B-67
IRV1-10 ............................................................................................................................................................... B-69
IRV2-10 ................................................................................................................................................................B-71
ERV1-10 ...............................................................................................................................................................B-73
ERV1-16 ...............................................................................................................................................................B-75
PPD22A ..............................................................................................................................................................B-77
EPRV2-8 ..............................................................................................................................................................B-79
EPPV5 ................................................................................................................................................................ B-81
EPPV6 ................................................................................................................................................................ B-83
EPRV1-10 ........................................................................................................................................................... B-85
EPRV3-10 ........................................................................................................................................................... B-87
EPRV1-16 ........................................................................................................................................................... B-89
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-3
Note: Proportional valve solenoid
Proportional valves coils and electronic valve drivers
are covered in section C of this
Valve locator/section contents Catalog.
Functional symbol
Typical
Model Cavity Flow rating pressure Page
2 (In)
Proportional bi-directional, NC, poppet L/min (USgpm) bar (psi)
1 Typical
Model Cavity Flow rating pressure Page
EPV16A
2 Proportional flow control, NC, poppet L/min (USgpm) bar (psi)
1
EPV16B
1
2
Typical
Model Cavity Flow rating pressure Page
2
Proportional flow control, NC, poppet L/min (USgpm) bar (psi)
Typical
2 Model Cavity Flow rating pressure Page
1 3 Typical
Model Cavity Flow rating pressure Page
Typical
1 2 Model Cavity Flow rating pressure Page
Typical
2 4 Model Cavity Flow rating pressure Page
B-4 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
Proportional valves
Valve locator/section contents
Functional symbol
Proportional flow
Control, NC, spool
L/min (USgpm) bar (psi) B
ESVL9-10-E C-10-5S 23 (2.9) 250 (3600) B-53
ESVL9-10-F C-10-5S 23 (2.9) 250 (3600) B-54
Typical
Model Cavity Flow rating pressure Page
2
Proportional bi-directional, NC, poppet L/min (USgpm) bar (psi)
Typical
Model Cavity Flow rating pressure Page
3 2
Typical
Model Cavity Flow rating pressure Page
3 2
2
Typical
Model Cavity Flow rating pressure Page
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-5
Proportional valves
Valve locator/section contents
1
Typical
2 Model Cavity Flow rating pressure Page
Typical
Model Cavity Flow rating pressure Page
Typical
1 Model Cavity Flow rating pressure Page
2 3
B-6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
Proportional valves
Section overview
This section gives basic The ERV1-10 is an electric, Varying the voltage at the Coil features and benefits
specifications for the proportionally controlled, coil is one of the simplest The valves in this catalog
complete line of Vicker’s internally pilot operated, means of control available. are offered with a choice
screw-in proportional control spool type screw-in relief Any of the Vickers DC coils of two or three standard
valves. Its purpose is to valve. It is capable of handling will work on most of these voltages and several types
provide a quick, convenient flows from 3,8-60,0 L/min valves simply by varying
reference tool when choosing (1-15 USgpm) at pressures the voltage between 0 and
of electrical connections.
For other coil ratings and
B
proportional valves or when from 35-210 bar (500-3000 psi). 75% of the rated coil voltage. connections, consult your
designing a system using Also available is an ERV1-16 It should be noted that as the Eaton applications engineer.
these components. which is capable of handling operating temperature of a
flows from 7,6-132 L/min. coil increases, the solenoid • Variety of voltages and
The EPV10 has several terminations
outstanding performance (2-35 USgpm) at pressures force decreases. Therefore if
from 35-210 bar (100-500 psi). the voltage is held constant • Coils are interchangeable
features which give it a for serviceability on the
unique position in the screw- The ERV2-10 is a low flow as the coil heats up then valve
pressure (or flow) will change. EPV10 and EPV16. Coils
in cartridge valve market. electric proportionally
are interchangeable for
Valve gain linearity, flow controlled relief valve similar The IRV1 is a proportionally serviceability on the
force pressure compensation to the ERV1-10. This valve is controlled poppet type, relief ERV1-10, EPV1-16, EPRV1-10
characteristics above 20 bar rated for flows from 0,2-2,8 valve, with an inverse function. and EPRV1-16
(300 psi) and low internal L/min (0.05-0.75 USgpm) This valve is capable of
leakage. and pressures up to 35 bar handling flows up to 1 L/min • Compact, one-piece
(500 psi). (0.25 USgpm) and pressures weather-proof encapsulated
The EPV16 is a proportionally design. Eliminates need for
controlled two-way poppet The EPRV2-8 is an electric, up to 210 bar (3000 psi).
extra seals
type valve. The main poppet proportionally controlled, IRV2-10 is an inverse • An arc suppression diode
amplifies a small flow direct acting spool type, proportionally controlled spool molded into the coil is
through the pilot circuit and screw-in pressure reducing/ type two stage relief valve. available as a standard
is comparable to a transistor. relieving valve. It is capable of Ideal for use to control fan option on ERV, EPRV and
As the transistor uses small handling flows from drive or brush pressure, where EFV valves
currents to control larger 0-7,6 L/min (0-2 USgpm) full speed or force is required
currents, the hydraulic valve at set pressures from 0-22 bar under electrical failure. Valve Fluid cleanliness
transistor or VALVISTOR uses (0-320 psi). is capable to handle flow Proper fluid condition
the pilot flow to control the The EPRV1-10 is an electric, up to 57 lpm (15 USgpm) is essential for long and
main stage flow with servo- proportionally controlled, and pressure up to 240 bar satisfactory life of hydraulic
like response flow to control. internally pilot operated, (3500 psi). components and systems.
The ESV1 is a proportional spool type, screw-in pressure Electrical current Hydraulic fluid must have the
two-way, pressure reducing/relieving valve. It controls with PWM are correct balance of cleanliness,
compensated, poppet type is capable of handling flows recommended for all Eaton materials, and additives for
flow control valve. The valve from 0-7,6 L/min (0-2 USgpm) proportional valves. protection against wear
is available in 8, 10, and at set pressures from 14-35 of components, elevated
Closed-loop electrical control
12 sizes, both normally open bar (200-500 psi). Also viscosity, and inclusion of air.
with feedback from the
or normally closed in the available is an ERV1-16
parameter to be monitored
de-energized position. which is capable of handling Warning
will provide the most accurate
The EFV1 is a proportionally flows from 0-38 L/min Application of these
control.
controlled two-way, spool (0-10 USgpm) at set pressures products beyond published
type flow control valve. from 14-35 bar (200-500 psi). Valve features and benefits performance specifications
Technically the valve is not The EPRV3-10 is an electric, • Products in this catalog have may cause valve malfunction
pressure compensated, but it proportionally controlled, been fatigue tested which may result in personal
is partial flow force pressure internally pilot operated, to one million cycles injury and/or damage to
compensated. spool type, screw-in pressure at 132% or 10 million cycles the machine.
reducing/relieving valve. It at 115% of rated pressure
The EFV2 is a three port, Warning
pressure compensated, is capable of handling flows • All operating parts are
from 0-30 L/min (0-8 USgpm) For pressures over 210 bar
proportional flow control hardened steel, ground and
at set pressures from (3000 psi) use steel housing.
valve. The valve can be used honed for long life and low
as a priority flow regulator, 35-207 bar (500-3000 psi). leakage
with regulated flow being Vickers proportional pressure • Designed for maximum
supplied to port 3 and excess and flow control valves flexibility and minimal space
flow being by-passed to are designed to be easily requirements
port 2. If port 2 is blocked the controlled by the simplest of • All exposed cartridge
valve functions as a restrictive, DC electrical devices such surfaces are zinc dichromate
2 way, pressure compensated as a 12 volt battery and a plated to resist corrosion
flow regulator. potentiometer. • Reliable, economical and
compact
• Rated flows up to 160
L/min (42 USgpm)
• Optional nose-in, side-out
or side-in, nose out flow
direction (EPV16 series)
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-7
PFR21H - Proportional valve
Proportional bi-directional poppet, flow control valve
Up to 18L/min (5 USgmp) • 210 bar (3000 psi)
Pressure drop
Viscosity = 32 cSt (150 SSU)
PFR21H @ 100% Performance curves Pressure differential - bar
Flow - L/min 0 70 140 210
10 40 10 40
0 10 20 30
300 21
7.5 30 7.5 30
Flow - US gpm
Flow - US gpm
Flow - L/min
Pressure - bar
Pressure - psi
Flow - L/min
200 14 100% of
rated amps
5 50
20 5 20
bar
100 7 83% of
2.5 10 rated amps
210 2.5 62% of
10
bar rated amps
0 0 0 0 0 0
0 2.5 5 7.5 0 25 50 75 100 0 1000 2000 3000
Flow - US gpm % related amps Pressure differential - psi
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
PFR21H - Proportional valve
Proportional bi-directional poppet, flow control valve
Up to 18L/min (5 USgmp) • 210 bar (3000 psi)
1 2 3 4 5 6
5 Voltage
3 Manual override
12 - 12 VDC
6 - Screw
24 - 24 VDC
Dimensions
mm (inch)
2 holes
Ø6.8 (0.27) 12.8
thro’ (0.53)
22.0
98.0 (0.87) 50.8
(3.86) 50.0 (2.00)
(1.97)
16.0 6.0 6.0 15.9
(0.63) (0.24) (0.24) (0.63) 31.8
19.0 (1.25)
(0.75)
24 A/F
18.9
26.50 (0.74)
(1.04) 2
3/4”-16-UNF-2A
Ø15.8 1
(0.62)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-9
EPV10 - Proportional valve
Proportional uni-directional poppet, flow control valve
Up to 30L/min (8 USgmp) • 350 bar (5000 psi)
2 Operation Features
In the de-energized condition, Hardened, ground and honed
blocked from port 2 to 1 with working parts to limit leakage.
no reverse flow permitted. IP69K Tough coil compatibility.
When energized, flow is Continuously rated. Compact
B 1 allowed from port 2 to design with low pressure drop.
port 1 in direct proportion to
the current applied to the
solenoid coil.
Performance data is typical with fluid at 21,8 cSt (105 SSU) and 49˚C (120˚F)
Typical application pressure (at port 2) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 0 - 30 L/min (0 - 8 USgpm)
Operating ambient temperature -30° to 90°C (-22° to 194°F)
Cavity C-10-2
Fluids Anti-wear hydraulic oils with Buna-N seals (standard) Phosphate
esters (non-alkyl) with Viton® seals are available by request
Viton is a registered trademark of E.I. DuPont
Weight cartridge only 0,78 kg (1.72 lbs)
Filtration 70 - 210 bar (1000 - 3000 psi) Cleanliness code 17/15/12
210+ bar (3000+ psi) Cleanliness code 15/13/11
Standard housing materials Aluminum or Steel
Typical hysteresis Less than 4% of rated current at 10 bar
pressure drop – Pulse Width Modulated (PWM)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-10 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EPV10 - Proportional valve
Proportional uni-directional poppet, flow control valve
Up to 30L/min (8 USgmp) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9 10
Dimensions
mm (inch) Ø 26,7 (1.05)
Cartridge only
34,0
(1.34) 0.875"-14 Thd.
2
Opening
clearance
2,0 (0.08) 1
Ø 15,80 (0.622)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-11
EPV10 - Proportional flow control valve
Proportional uni-directional poppet, flow control valve
Up to 30L/min (8 USgmp) • 350 bar (5000 psi)
20
10
Flow vs current 10
With 10 bar differential
between inlet and outlet
A - 210 bar (3000 psi) 8 30
pressure drop from
Port 2 to Port 1
B - 10 bar (150 psi) 6
Flow - USgpm
Flow - L/min
pressure drop from
20
Port 2 to Port 1
4
A B
10
2
0 0
10 20 30 40 50 60 70 80 90 100
% Current - mA
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-12 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EPV10 - Proportional flow control valve
Proportional uni-directional poppet, flow control valve
Up to 30L/min (8 USgmp) • 350 bar (5000 psi)
10
2 E - 43% of input current
0 0
0 20 40 60 80 100 120 140 160 180 200
Pressure drop - bar
-3
450
B
-6 00
.4 Hz 1 Hz 10 Hz 100 Hz
Frequecy Hz
A - dB
B - Phase Lag
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-13
EPV16 - Proportional valve
Proportional flow control, normally closed, poppet
160L/min (42 USgpm) • 280 bar (4000 psi)
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 280 bar (4000 psi)
Cartridge fatigue pressure (infinite life) 280 bar (4000 psi) NFPA rated
Rated flow 0 to 160 L/min (42 USgpm)
EPV16A 50 cm /min, max @ 140 bar (2000 psi)
3
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-14 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EPV16 - Proportional valve
Proportional flow control, NC, poppet
160L/min (42 USgpm) • 280 bar (4000 psi)
1 2 3 4 5 6 7 8 9 10 11 12
Aluminium Steel
2 Size EPV16-A EPV16-B EPV16-A EPV16-B
16 - 16 size 0 Cartridge only
4G 1/2" BSPP 02-185448 02-166607 02-180050 02-165500
3 Flow direction 6G 3/4" BSPP 02-185449 02-161592 02-180051 02-164931
A - Nose-in, side-out 10H SAE 10 02-185450 02-170238 02-180048 02-161983
B - Side-in, nose-out
12H SAE 12 02-185447 02-166609 02-180049 02-161982
5C CETOP5 (NFPA D05) Interface (Requires steel body)
4 Rated flow
See section J for housing details.
4 - 40 L/min (10.5 USgpm)
6 - 60 L/min (16 USgpm) 7 Seal material 9 Manual override option 10 Connector type
10 - 100 L/min (26 USgpm)
N - Buna-N (standard) Blank - No manual override 0 - No connector
16 - 160 L/min (42 USgpm)
V - Viton 0 - No manual override F - Weatherpack male
NF - Buna-N and 60 mesh M - Pin type Q - Spade Terminals
filter screen S - Screw type (3mm Hex) (DC only)
5 Valve housing material VF - Viton and 60 mesh W - Flying Lead
Omit for cartridge only filter screen Manual override is available in N - Deutsch DT04-2P
two different configurations, either Y - Metripack 150 male*
A - Aluminum push pin type is used when system U - DIN 43650
S - Steel 8 Voltage rating pressure does not exceed 210 bar *Preferred Packard connector.
Note: Aluminum housings can be 12D - 12VDC (3000 psi). The screw type can be For coil part numbers and dimensions
used for pressures up to 210 bar 24D - 24VDC used at any system pressure. see section C.
(3000 psi). Steel housing must 00D - No Coil Note: When using the “Screw
be used for operating pressures Type” override, care must be taken
above 210 bar 3000 psi). to return the override back to its 11 Design number
neutral position before activating the 13 - Design no.
valve. Failure to take this precaution
may result in personal injury or
damage to the machine. 12 Special features
Blank - None
Warning Caution
When using the A separate check valve is
“Screw Type” override, care required down stream to
must be taken to return the isolate the EPV valve from
override back to its neutral load forces when the EPV is
position before activating used to hold a load.
the valve. Failure to take
this precaution may result in
personal injury or damage to
the machine.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-15
EPV16 - Proportional valve
Proportional flow control, normally closed, poppet
160L/min (42 USgpm) • 280 bar (4000 psi)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-16 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EPV16A
Proportional flow control, normally closed, poppet
160L/min (42 USgpm) • 280 bar (4000 psi)
Dimensions Valves are shown with “U” Torque cartridge in aluminum Torque cartridge in steel
mm (inch) coil. See Section C for coil housing 108-122 Nm housing 136-149 Nm
information. (80-90 ft. lbs) (100-110 ft. lbs)
1.312"
-12 Thd.
Screw type
actuator (shown) 3
2 2 mm hex socket
1 1
38,1 Hex (1.50) Ø 25,4 (1.00)
With manual actuator No manual actuator
129.7
(5.07)
1.5
(0.06)
Port LS 3 2 79.4
SAE (3.13)
38.1 4-Plugged
(1.50) 100.8 38.1
2X Ø8.74 (3.97) (1.50)
(0.344) 1
12.7 76.2
30.2 (3.00) 30.2
(1.19) (0.50) (1.19)
100.8
(3.97)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-17
EPV16B
Proportional flow control, normally closed, poppet
160L/min (42 USgpm) • 280 bar (4000 psi)
Dimensions For EPV16-B (flow 2 to 1), When purchased with undercut A separate external port
mm (inch) Port 3 must be connected body, this connection is connection is not required for
to Port 1 externally to the included in the body and Port 3 EPV16-A (flow 1 to 2).
cartridge, either by passages is not machined.
in the cavity block or external
Cartridge only - EPV16B
B Side-in, nose out
plumbing.
129,0
(5.07) 124,7
(4.90)
67,9
185,3 (2.67) 181,0
(7.29) (7.12) Screw type
actuator (shown) 3
mm hex socket
1.312"-12 Thd. 1
3 3
2 2 3
1
1
Ø 25,4 (1.00) 2
38,1 Hex (1.50)
Ø 28,6 (1.12)
129.7
(5.07)
1.5
(0.60)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-18 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EPV16 - Proportional valve
Proportional flow control, normally closed, poppet
160L/min (42 USgpm) • 280 bar (4000 psi)
EPV16-A-**-S-5C-**-D-(*)-*-12
CETOP 5 Interface
mm (inch)
60,0
(2.38) 51,0
(2.01)
?
Ø 6,96/6,85 thru 4 holes
EPV16-B-**-S-5C-**-D-(*)-*-12
CETOP 5 Interface
mm (inch)
PA B Tb Ta
ISO-4401-AC-05-4-A
(NFPA D05) 22,8 (0.89) 11,7 (0.46)
mounting surface
P
B ? A
Note: CETOP 5 Seal Kit 02-319667.
Tb Ta
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-19
ESV1-8-C - Proportional valve
Proportional flow control, normally closed, poppet
Up to 31 L/min (8 USgpm) • 210 bar (3000 psi)
2 Operation Features
In the de-energized position, In the energized position, flow Hardened and ground working
this valve blocks flow from from port 1 to port 2 is parts to give long life and very
port 2 to port 1and free flow is restricted while free flow is low leakage. IP69K Tough coil
allowed from port 1 to port 2. allowed from port 2 to port 1. compatibility, continuously
B 1 The valve flow is proportional rated. Compact design with
to the current applied to low pressure drop.
the coil.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure 210 bar (3000 psi)
Cartridge endurance rating 1 million cycles
Cartridge fatigue pressure rating (NFPA/T2.6.1 R2-2000) 210 bar (3000 psi)
Rated flow @ 500 psid, 8.4 gpm min, 9.3 gpm nom
Leakage (fully closed) 5 drops/min max @ 3000 psi
Nominal supply voltage 12/24 VDC
Current to open valve 1350-1450 mA (12V coil), 075-725 mA (24V coil)
Temperature range -30° to 90°C (-22° to 194°F)
Maximum oil temperature 120°C (248°F)
Maximum internal oil temperature 200°C (392°F)
2 Cavity C-8-2
All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10,
Fluids SAE 20, etc.
Filtration Cleanliness code 18/16/13
1
Housing material (standard) Aluminum
Hysterisis 1 Usgpm with dither
Weight cartridge only .11 kg (.24 lbs)
Seal kit 02-165875 (Buna-N), 02-165877 (Viton®)
Viton is a registered trademark of E.I. DuPont
Flow - USgpm
20 8
pressure compensators to 15
provide proportional flow 6
control to any actuator. 10
4
5
2
0 500 1000 1500 2000 2500 3000
0
Pressure Drop - PSID 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
Current - Amps
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-20 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
ESV1-8-C - Proportional Valve
Proportional flow control, normally closed, poppet
Up to 31 L/min (8 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10 11 12
Dimensions
mm (inch)
Cartridge only Installation drawing
19,1 HEX
(.75) 52.5
(2.07)
19.1
(0.75)
52,5
(2.07) 15.5
(0.61)
38.1
(1.50) 2 2X 7.1
50.8 (0.281)
(2.00)
22,1 HEX 26,2
(.875) (1.03)
1
3.4 44.0
27,8 0,750” - 16 THD. (0.13) (1.73)
(1.09) 2 50.8
(2.00)
Ø 12,62 Ø 31,8
(1.25)
(.497)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-21
ESV1-10-C - Proportional valve
Proportional flow control, normally closed, poppet
Up to 70 L/min (18.5 USgpm) • 210 bar (3000 psi)
2 Operation Features
In the de-energized position, In the energized position, flow Hardened and ground working
this valve blocks flow from from port 1 to port 2 is parts to give long life and very
port 2 to port 1and free flow is restricted while free flow is low leakage. IP69K Tough coil
allowed from port 1 to port 2. allowed from port 2 to port 1. compatibility, continuously
B 1 The valve flow is proportional rated. Compact design with
to the current applied to low pressure drop.
the coil.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure 210 bar (3000 psi)
Cartridge endurance rating 1 million cycles
Cartridge fatigue pressure rating (NFPA/T2.6.1 R2-2000) 210 bar (3000 psi)
Rated flow @ 500 psid, 18.5 gpm min, 19.4 gpm nom
Leakage (fully closed) 5 drops/min max @ 3000 psi
Nominal supply voltage 12/24 VDC
Current to open valve 900-1000 mA (12V coil), 450-500 mA (24V coil)
2 Temperature range -30° to 90°C (-22° to 194°F)
Maximum oil temperature 120°C (248°F)
1
Maximum internal oil temperature 200°C (392°F)
Cavity C-10-2
All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10,
Fluids SAE 20, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Hysterisis 1 USgpm with dither
Weight cartridge only .13 kg (.28 lbs)
Seal kit 0565803 (Buna-N), 0566086 (Viton®)
Viton is a registered trademark of E.I. DuPont
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-22 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
ESV1-10-C - Proportional valve
Proportional flow control, normally closed, poppet
Up to 70 L/min (18.5 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10 11 12
Dimensions
mm (inch)
Cartridge only Installation drawing
19,1 HEX
(.75)
25.4
59,2 (1.00)
(2.33)
20.8
2X 7.1 2 (0.81)
(0.28) 63.5
(2.50)
25,4 HEX
(1.00)
19.0
31,7 0,875” - 14 THD. 1 (0.75)
(1.25) 34,6
9.5
2 (1.36) (0.37)
63.5
(2.50)
1
Ø 15,80
(.622)
Ø 38,9
(1.53)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-23
ESV1-12-C - Proportional valve
Proportional flow control, normally closed, poppet
Up to 104 L/min (27.3 USgpm) • 210 bar (3000 psi)
2 Operation Features
In the de-energized position, In the energized position, flow Hardened and ground working
this valve blocks flow from from port 1 to port 2 is parts to give long life and very
port 2 to port 1and free flow is restricted while free flow is low leakage. IP69K Tough coil
allowed from port 1 to port 2. allowed from port 2 to port 1. compatibility, continuously
B 1 The valve flow is proportional rated. Compact design with
to the current applied to low pressure drop.
the coil.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure 210 bar (3000 psi)
Cartridge endurance rating 1 million cycles
Cartridge fatigue pressure rating (NFPA/T2.6.1 R2-2000) 210 bar (3000 psi)
Rated flow @ 500 psid, 27.3 gpm min, 28.9 gpm nom
Leakage (fully closed) 5 drops/min max @ 3000 psi
Nominal supply voltage 12/24 VDC
Current to open valve 800-900 mA (12V coil), 400-450 mA (24V coil)
Temperature range -30° to 90°C (-22° to 194°F)
Maximum oil temperature 120°C (248°F)
Maximum internal oil temperature 200°C (392°F)
2
Cavity C-12-2
All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10,
Fluids SAE 20, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Hysterisis 1 USgpm with dither
Weight cartridge only .23 kg (.48 lbs)
Seal kit 02-165889 (Buna-N), 02-165888 (Viton®)
Viton is a registered trademark of E.I. DuPont
pressure compensators to 55
Flow - USgpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-24 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
ESV1-12-C - Proportional valve
Proportional flow control, normally closed, poppet
Up to 104 L/min (27.3 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10 11 12
Dimensions
mm (inch)
19,1 HEX
(0.75)
72.9
(2.87)
12.7 25.4
(0.50) (1.00)
12.7
59,2 (0.50)
(2.87)
2
88.9 63.50
(2.50) 28.7
(3.50) (1.13)
31,8 HEX
(1.25) 1
1.062” - 12 THD. 34,6
44,7 63.50 2X Ø10.31
(1.36) (2.50)
(1.76) 2 (0.406)
88.9
(3.50)
Ø 23,75
(.935)
Ø 38,9
(1.53)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-25
ESV1-8-O - Proportional valve
Proportional flow control, normally open, poppet
Up to 32 L/min (8.4 USgpm) • 210 bar (3000 psi)
2 Operation Features
In the de-energized position, In the energized position, flow Hardened and ground working
this valve allows free flow from is blocked from port 2 to port 1, parts to give long life and very
port 2 to port 1 and restricts and free flow is allowed from low leakage. IP69K Tough coil
flow from port 1 to port 2. port 1 to port 2. The valve flow compatibility, continuously
B 1 is proportional to the current rated. Compact design with
applied to the coil. low pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge endurance rating 1 million cycles
Cartridge fatigue pressure rating (NFPA/T2.6.1 R2-2000) 210 bar (3000 psi)
Rated flow @ 500 psid, 8.4 gpm min, 9.3 gpm nom
Leakage (fully closed) 5 drops/min, max @ 3000 psi
Nominal supply voltage 12/24 VDC
Current to fully close valve 1100-1250 mA (12V coil), 550-625 mA (24V coil)
Temperature range -30° to 90°C (-22° to 194°F)
Maximum oil temperature 120°C (248°F)
Maximum internal oil temperature 200°C (392°F)
2
Cavity C-8-2
All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10,
1 Fluids SAE 20, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Hysterisis 1 USgpm with dither
Weight cartridge only .10 kg (.23 lbs)
Seal kit 02-165875 (Buna-N), 02-165877 (Viton®)
Viton is a registered trademark of E.I. DuPont
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-26 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
ESV1-8-O - Proportional valve
Proportional flow control, normally open, poppet
Up to 32 L/min (8.4 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10 11 12
Dimensions
mm (inch)
Installation drawing
Cartridge only
19,0 HEX
(0.75)
64.3
(2.53)
19.1 19.1
(0.75) (0.75)
64,3
15.5
(2.53) (0.61)
38.1
(1.50) 2 2X 7.1
50.8 (0.281)
(2.00)
26,2 (1.03)
22,2 HEX
1
(0.87)
3.4 44.0
(0.13) (1.73)
0,750” - 16 THD 50.8
27,8 (2.00)
(1.09) 2
1
Ø 12,62
(.497) Ø 31,8 (1.25)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-27
ESV1-10-O - Proportional valve
Proportional flow control, normally open, poppet
Up to 70 L/min (18.5 USgpm) • 210 bar (3000 psi)
2 Operation Features
In the de-energized position, In the energized position, flow Hardened and ground working
this valve allows free flow from is blocked from port 2 to port 1, parts to give long life and very
port 2 to port 1 and restricts and free flow is allowed from low leakage. IP69K Tough coil
flow from port 1 to port 2. port 1 to port 2. The valve flow compatibility, continuously
B 1 is proportional to the current rated. Compact design with
applied to the coil. low pressure drop.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure 210 bar (3000 psi)
Cartridge endurance rating 1 million cycles
Cartridge fatigue pressure rating (NFPA/T2.6.1 R2-2000) 210 bar (3000 psi)
Rated flow @ 500 psid, 18.5 gpm min, 19.4 gpm nom
Leakage (fully closed) 5 drops/min, max @ 3000 psi
Nominal supply voltage 12/24 VDC
Current to fully close valve 1000-1200 mA (12V coil), 500-600 mA (24V coil)
Temperature range -30° to 90°C (-22° to 194°F)
Maximum oil temperature 120°C (248°F)
2
Maximum internal oil temperature 200°C (392°F)
1 Cavity C-10-2
All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10,
Fluids SAE 20, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Hysterisis 1 USgpm with dither
Weight cartridge only .14 kg (.30 lbs)
Seal kit 0565803 (Buna-N), 02-165877 (Viton®)
Viton is a registered trademark of E.I. DuPont
16
Flow - USgpm
35
circuits or in conjunction with
pressure compensators to 30
12
provide proportional flow 25
control to any actuator. 20 8
15
4
10
5 0
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
0 500 1000 1500 2000 2500 3000 Current - Amps
Pressure Drop - PSID
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-28 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
ESV1-10-O - Proportional valve
Proportional flow control, normally open, poppet
Up to 70 L/min (18.5 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10 11 12
Dimensions
mm (inch)
19,1 HEX
(.75)
25.4
70,3 (1.00)
(2.77)
20.8
2X 7.1 2 (0.81)
(0.28) 63.5
(2.50)
25,4 HEX
19.0
(1.00) 1 (0.75)
34,6
31,7 (1.36) 9.5
0,875” - 14 THD. (0.37)
(1.25) 63.5
2 (2.50)
Ø 15,80
(.622) Ø 38,9
(1.53)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-29
ESV1-12-O - Proportional valve
Proportional flow control, normally open, poppet
Up to 104 L/min (27.3 USgpm) • 210 bar (3000 psi)
2 Operation Features
In the de-energized position, In the energized position, flow Hardened and ground working
this valve allows free flow from is blocked from port 2 to port 1, parts to give long life and very
port 2 to port 1 and restricts and free flow is allowed from low leakage. IP69K Tough coil
flow from port 1 to port 2. port 1 to port 2. The valve flow compatibility, continuously
B 1 is proportional to the current rated. Compact design with
applied to the coil. low pressure drop.
Performance data
Profile view Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure 210 bar (3000 psi)
Cartridge endurance rating 1 million cycles
Cartridge fatigue pressure rating (NFPA/T2.6.1 R2-2000) 210 bar (3000 psi)
Rated flow @ 500 psid, 27.3 gpm min, 28.9 gpm nom
Leakage (fully closed) 5 drops/min max @ 3000 psi
Nominal supply voltage 12/24 VDC
Current to fully close valve 800-900 mA (12V coil), 400-450 mA (24V coil)
Temperature range -30° to 90°C (-22° to 194°F)
Maximum oil temperature 120°C (248°F)
Maximum internal oil temperature 200°C (392°F)
Cavity C-12-2
2
All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10,
Fluids SAE 20, etc.
1
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Hysterisis 1 USgpm with dither
Weight cartridge only .10 kg (.23 lbs)
Seal kit 02-165889 (Buna-N), 02-165888 (Viton®)
Viton is a registered trademark of E.I. DuPont
pressure compensators to 45 20
provide proportional flow 40
control to any actuator. 35 15
30
25
10
20
15
10 5
5
0
0 500 1000 1500 2000 2500 3000 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
Pressure Drop - PSID Current - Amps
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-30 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
ESV1-12-O - Proportional valve
Proportional flow control, normally open, poppet
Up to 104 L/min (27.3 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10 11 12
Dimensions
mm (inch)
88.9 63.50
(2.50) 28.7
(3.50) (1.13)
31,8 HEX
(1.25)
1
34,6
63.50 2X Ø10.31
(1.36) (2.50)
1.062” - 12 THD. (0.406)
2 88.9
44,7 (3.50)
(1.76)
Ø 23,75
Ø 38,9
(.935)
(1.53)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-31
EFV1-10-C - Proportional valve
Proportional flow, normally open, poppet
Up to 38 L/min (10 USgpm) • 210 bar (3000 psi)
1 3 Operation Features
The valve is controlled by Operation of the valve with Hardened and ground working
current supplied to the coil. flow from port 2 to port 3 will parts to give long life with good
At zero current, the valve is produce flow vs current and control; Compact design with
fully closed from port 3 to flow vs pressure drop curves low pressure drop.IP69K Tough
2
B port 2. At 1500 mA (12V coil) that are significantly different coil compatibility, continuously
the valve is considered fully from those obtained with rated.
Profile view open. This is the maximum flow from port 3 to port 2.
intended current level for Since the spool and armature
use in applications. Port 1 is are pressure balanced, the
used for pressure balancing operating pressure does
the spool and armature not affect the operating
and must be blocked in characteristics of the valve.
all cases. The maximum The operating point of the
intended pressure drop is valve is determined only by
300 PSID. At pressure drops current, pressure drop and
above 300 PSID, almost no temperature.
increase in flow is obtained.
The intended flow direction is
from port 3 to port 2.
3
Performance data
2 Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
1
Typical application pressure 210 bar (3000 psi)
Description Cartridge endurance rating 1million cycles
This is a 2 way 2 position, Cartridge fatigue pressure (infinite life) 210 bar (3000 psi) NFPA rated
pilot operated spool type,
Flow rating “A” 15.1 L/min (4 USgpm)
normally closed, proportional Flow rating “B” 30.2 L/min (8 USgpm)
flow control screw in cartridge Rated flow Flow rating “C” 37.9 L/min (10 USgpm)
valve. Ideal for speed control
and in conjunction with Internal leakage 197 cm3/min (12in3/min) @ 3000 PSID
pressure compensators to Nominal supply voltage 12/24 V
provide proportional pressure
Current to fully close valve 1500-1600 mA (12V coil), 750-800 mA (24V coil)
compensated flow control to
any actuator. Recommended PWM frequency 200-400 Hz
Coil resistance 4.7v V/12V, 19.0V/24V
Cartridge only 0,37 kg (0.82 lb), cartridge with coil and end nut
Mass 0,73 kg (1.62 lb)
Temperature range -30° to 90°C (-22° to 194°F)
Maximum oil temperature 120°C (248°F)
Maximum internal coil temperature 200°C (392°F)
Cavity C-10-3
All general purpose hydraulics fluids such as: MIL-H-5606, SAE
Fluids 10, SAE 20, DTE 24, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Hysterisis 1 USgpm with 400Hz PWM driver
Seal kit 9900225-000 (Buna-N), 9900226-000 (Viton®)
Viton is a registered trademark of E.I. DuPont
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-32 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EFV1-10-C - Proportional valve
Proportional flow, normally open, poppet
Up to 38 L/min (10 USgpm) • 210 bar (3000 psi)
Max Flow vs. Pressure drop Max Flow vs. Pressure drop
Flow rating “A” at zero current Flow rating “B” at zero current
16
0 3.4 6.9 10.3 13.8 17.2 20.7
- 60 16
0 3.4 6.9 10.3 13.8 17.2 20.7
- 60 B
14 - 50 14 - 50
Flow - USgpm
Flow - USgpm
12 12
Flow - L/min
Flow - L/min
10 - 40 10 - 40
8 - 30 8 - 30
6 6
- 20 - 20
4 4
2 - 10 2 - 10
0 0 0 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300
Pressure Drop - PSID Pressure Drop - PSID
12
Flow - L/min
Flow %
10 - 40
50
8 - 30
6
- 20 25
4
2 - 10
0 0
0
0 50 100 150 200 250 300 0 200 400 600 800 1000 1200 1400 1600
Pressure Drop - PSID Current - mA
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-33
EFV1-10-C - Proportional valve
Proportional flow, normally open, poppet
Up to 38 L/min (10 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-34 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EFV1-10-C - Proportional valve
Proportional flow, normally open, poppet
Up to 38 L/min (10 USgpm) • 210 bar (3000 psi)
Dimensions Torque cartridge in housing Note: S type manual override Note: Port 1 is unused and
mm (inch) S - 68-75 Nm (50-55 ft lbs) shown. DIN 43650 connector must be plugged.
shown.
A - 47-54 Nm (35-40 ft lbs)
B
Cartridge only
106,7
(4.20)
86,4
(3.40)
64,0
(2.52)
47,2 3
(1.86)
2
86.4
(3.40)
24,6 25,4
(.97) (1.00)
3
2X7,14
18,8 57.2 2 (0.281) 75,4
(.74) (2.25) (2.97)
34,8
1 (1.37)
50 9.5 57.15
(1.97) (0.38) (2.250)
75.4
(2.97)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-35
EFV1-12-C - Proportional valve
Proportional flow, normally closed spool
Up to 77 L/min (20.6 USgpm) • 210 bar (3000 psi)
1 3 Operation Features
The valve is controlled by Operation of the valve with Hardened and ground working
current supplied to the coil. flow from port 2 to port 3 will parts to give long life with
At zero current, the valve is produce flow vs current and good control; Compact design
2 fully closed from port 3 to flow vs pressure drop curves with low pressure drop.IP69K
B port 2. At 1500 mA (12V coil) that are significantly different Tough coil compatibility,
the valve is considered fully from those obtained with flow continuously rated.
Profile view open. This is the maximum from port 3 to port 2. Since the
intended current level for use spool and armature are
in applications. Port 1 is used pressure balanced, the
for pressure balancing the operating pressure does not
spool and armature and must affect the operating
be blocked in all cases. The characteristics of the valve.
maximum intended pressure The operating point of the
drop is 300 PSID. At pressure valve is determined only by
drops above 300 PSID, almost current, pressure drop and
no increase in flow is obtained. temperature.
The intended flow direction is
from port 3 to port 2.
3 Performance data
2 Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
1 Typical application pressure 210 bar (3000 psi)
Cartridge endurance rating 1million cycles
Description Cartridge fatigue pressure (infinite life) 210 bar (3000 psi) NFPA rated
This is a 2 way 2 position, Flow rating “A” 55 L/min (14.3 USgpm)
pilot operated spool Rated flow Flow rating “B” 77 L/min (20.6 USgpm)
type, normally closed,
proportional flow control Internal leakage (fully closed) 77-483 cm3/min (5-30 in3/min) @ 210 bar (3000 PSID)
screw in cartridge valve. Nominal supply voltage 12/24 V
Ideal for speed control and
Current to fully close valve 1500-1600 mA (12V coil), 750-800 mA (24V coil)
in conjunction with pressure
compensators to provide Recommended dither frequency 200-400 Hz
proportional pressure
Coil resistance 4.7v V/12V, 19.0V/24V
compensated flow control to
any actuator. Cartridge only 0,37 kg (0.82 lb), cartridge with coil and end nut
Mass 0,73 kg (1.62 lb)
Temperature range -30° to 90°C (-22° to 194°F)
Maximum oil temperature 120°C (248°F)
Maximum internal coil temperature 200°C (392°F)
Cavity C-12-3
All general purpose hydraulics fluids such as: MIL-H-5606, SAE
Fluids 10, SAE 20, DTE 24, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Hysterisis 1 USgpm with 400Hz PWM driver
Seal kit 9900171-000 (Buna-N), 9900172-000 (Viton®)
Viton is a registered trademark of E.I. DuPont
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-36 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EFV1-12-C - Proportional valve
Proportional flow, normally closed spool
Up to 77 L/min (20.6 USgpm) • 210 bar (3000 psi)
Max flow vs. Pressure drop Max flow vs. Pressure drop
Flow rating “A” at zero current Flow rating “B” at zero current
FPO
Flow - USgpm
12
Flow - L/min
10 - 40
8 - 30
6
- 20
4
2 - 10
0 0
0 50 100 150 200 250 300
Pressure Drop - PSID
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-37
EFV1-12-C - Proportional valve
Proportional flow, normally closed spool
Up to 77 L/min (20.6 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-38 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EFV1-12-C - Proportional valve
Proportional flow, normally closed spool
Up to 77 L/min (20.6 USgpm) • 210 bar (3000 psi)
Dimensions Torque cartridge in steel housing Note: Port 1 is unused and must Note: EFV1-12 with DIN-43650
S - 136-149 Nm (100-110 ft lbs) be plugged. connector shown.
mm (inch)
A - 108-122 Nm (80-90 ft lbs)
B
Cartridge only Installation drawing (Aluminum)
44,2 (1.74)
32,8 (1.29)
19,1 (0.75) 86.3
3.40
10.31 12.7 25.4
25.4 (0.406) (0.50)
(1.00) (1.00)
3 51.06
108 (2.03)
(4.25) 2 82.55
28.7
(1.13) (3.250)
86,3
(3.40) 1
64,0 44.5
(2.52) (1.75) 76.2
(3.00)
88.9
(3.50)
1.26
68,6
(2.70) 3
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-39
EFV1-10-O - Proportional valve
Proportional flow, normally open, poppet
Up to 38 L/min (10 USgpm) • 210 bar (3000 psi)
1 2 Operation Features
The valve is controlled by Operation of the valve with Hardened and ground working
current supplied to the coil. flow from port 3 to port 2 will parts to give long life with
At zero current, the valve is produce flow vs current and good control; Compact design
fully open from port 2 to port 3. flow vs pressure drop curves with low pressure drop.IP69K
B 3 At 1500 to 1600 mA (12V coil) that are significantly different Tough coil compatibility,
the valve is fully closed. Port 1 is from those obtained with continuously rated.
used for pressure balancing the flow from port 2 to port 3.
spool and armature and must Since the spool and armature
be blocked in all cases. The are pressure balanced, the
maximum intended pressure operating pressure does
drop is 300 PSID. At pressure not affect the operating
drops above 300 PSID, almost characteristics of the valve.
no increase in flow is obtained. The operating point of the
The intended flow direction is valve is determined only by
from port 2 to port 3. current, pressure drop and
temperature.
Profile view Performance data
Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure 210 bar (3000 psi)
Cartridge endurance rating 1million cycles
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi) NFPA rated
Flow rating “A” 15.1 L/min (4 USgpm)
Flow rating “B” 30.2 L/min (8 USgpm)
Rated flow Flow rating “C” 37.9 L/min (10 USgpm)
Internal leakage 197 cm3/min (12in3/min) @ 210 (3000 PSID)
Nominal supply voltage 12/24 V
Current to fully close valve 1500-1600 mA (12V coil), 750-800 mA (24V coil)
Recommended PWM frequency 200-400 Hz
Coil resistance 4.7v V/12V, 19.0V/24V
Cartridge only 0,37 kg (0.82 lb), cartridge with coil and end nut
Mass 0,73 kg (1.62 lb)
3 Temperature range -30° to 90°C (-22° to 194°F)
Maximum oil temperature 120°C (248°F)
2 Maximum internal coil temperature 200°C (392°F)
Cavity C-10-3
1 All general purpose hydraulics fluids such as: MIL-H-5606,
Fluids SAE 10, SAE 20, DTE 24, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Hysterisis 1 USgpm with 400Hz PWM driver
Seal kit 9900225-000 (Buna-N), 9900226-000 (Viton®)
Viton is a registered trademark of E.I. DuPont
Fl o w - L/m i n
Fl o w - L/m i n
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-40 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EFV1-10-O - Proportional Valve
Up to 38 L/min (10 USgpm) • 210 bar (3000 psi)
Performance Curves
Fl o w - U S g p m
Fl o w - U S g p m
Fl o w - L/m i n
Fl o w - L/m i n
10 40 10 40
8 30 8 30
6 6
20 20
4 4
2 10 2 10
0 0 0 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300
Pressure Drop - PSID Pressure Drop - PSID
Max.Flow
Max. flowvsvsPressure
Pressure drop
Drop Flow
Flow vs. Current
vs. Current
Flow rating
Flow rating “C” (Valve fully
"C" (Valve fully open)
open)
Fl o w - L/m i n
40
Fl o w %
10
50
8 30
6
20 25
4
2 10
0
0 0 0 200 400 600 800 1000 1200 1400 1600
0 50 100 150 200 250 300
Current - mA
Pressure Drop - PSID
Note:
Note: ToTodetermine
determine operating characteristics for
operating
the flow rating selected, at a specific differential
characteristics for the flow
pressure, first determine maximum flow from upper
curve atrating selected,pressure
the differential at a specific
value. This will be
differential
the “100% pressure,
flow” flow first curve.
on the lower
determine maximum flow
from upper curve at the dif-
Parameters: 400
ferential Hz PWM
pressure value.
This will be the “100%
flow” flow on the lower
curve.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-41
EFV1-10-O - Proportional valve
Proportional flow, normally open, poppet
Up to 38 L/min (10 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10
3 Seal material
Aluminium single Steel single 10 Special features
0 Cartridge only 00 - None
N - Buna-N
V - Viton
®
3B 3/8" BSPP 02-173358* Only required when valve has special
6T SAE 6 566162* 02-175124 features, omitted if “00”.
A - 4 USgpm @ 160 PSID Note: Both the manifold and port plug are required.
B - 8 USgpm @ 160 PSID See section J for housing details.
C - 10 USgpm @ 160 PSID *Aluminum – Light duty.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-42 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EFV1-10-O - Proportional valve
Proportional flow, normally open, poppet
Up to 38 L/min (10 USgpm) • 210 bar (3000 psi)
Dimensions Torque cartridge in housing Note: S type manual override Note: Port 1 is unused and
mm (inch) S - 68-75 Nm (50-55 ft lbs) shown. DIN 43650 connector must be plugged.
shown.
A - 47-54 Nm (35-40 ft lbs)
Cartridge only B
106,7
(4.20)
86,4
(3.40)
64,0
(2.52)
47,2 3
(1.86)
2
86.4
(3.40)
24,6 25,4
(.97) (1.00)
3
2X7,14
18,8 57.2 2 (0.281) 75,4
(.74) (2.25) (2.97)
34,8
1 (1.37)
50 9.5 57.15
(1.97) (0.38) (2.250)
75.4
(2.97)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-43
EFV1-12-O - Proportional valve
Proportional flow, normally open spool
Up to 104 L/min (27.5 USgpm) • 210 bar (3000 psi)
1 2 Operation Features
The valve is controlled by Operation of the valve with flow Hardened and ground working
current supplied to the coil. from port 3 to port 2 will parts to give long life with
At zero current, the valve is fully produce flow vs current and good control; Compact design
open from port 2 to port 3. At flow vs pressure drop curves with low pressure drop.IP69K
3
B 1500 to 1600 mA (12V coil) the that are significantly different Tough coil compatibility,
valve is fully closed. Port 1 is from those obtained with flow continuously rated.
Profile view used for pressure balancing the from port 2 to port 3. Since the
spool and armature and must be spool and armature are
blocked in all cases. The pressure balanced, the
maximum intended pressure operating pressure does not
drop is 300 PSID. At pressure affect the operating
drops above 300 PSID, almost characteristics of the valve. The
no increase in flow is obtained. operating point of the valve is
The intended flow direction is determined only by current,
from port 2 to port 3. pressure drop and temperature.
Performance data
Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure 210 bar (3000 psi)
Cartridge endurance rating 1million cycles
3 Cartridge fatigue pressure (infinite life) 210 bar (3000 psi) NFPA rated
Flow rating “A” 95 L/min (25 USgpm)
Rated flow Flow rating “B” 104 L/min (27.5 USgpm)
2
Internal leakage (fully closed) 77-483 cm3/min (5-30 in3/min) @ 210 bar (3000 PSID)
Nominal supply voltage 12/24 V
1 Current to fully close valve 1500-1600 mA (12V coil), 750-800 mA (24V coil)
Recommended PWM frequency 200-400 Hz
Coil resistance 4.7v V/12V, 19.0 V/24V
Description
This is a 2 way 2 position, Cartridge only 0,37 kg (0.82 lb), cartridge with coil and end nut
Mass 0,73 kg (1.62 lb)
pilot operated spool type,
normally open, proportional Temperature range -30° to 90°C (-22° to 194°F)
flow control screw in cartridge Maximum oil temperature 120°C (248°F)
valve. Ideal for speed control
and in conjunction with Maximum internal coil temperature 200°C (392°F)
pressure compensators to Cavity C-12-3
provide proportional pressure
compensated flow control to All general purpose hydraulics fluids such as: MIL-H-5606, SAE
Fluids 10, SAE 20, etc.
any actuator.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Hysterisis 1 USgpm with 400Hz PWM driver
Seal kit 9900171-000 (Buna-N), 9900172-000 (Viton®)
Viton is a registered trademark of E.I. DuPont
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-44 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EFV1-12-O - Proportional valve
Up to 104 L/min (27.5 USgpm) • 210 bar (3000 psi)
Performance Curves
Flow - USgpm
20 20
Flow - L/min
Flow - L/min
15 60 15 60
10 40 10 40
5 20 5 20
0 0 0 0
0 50 100 150 200 250 300 0 50 100 150 200 250 300
Pressure Drop - PSID Pressure Drop - PSID
50
0
0 200 400 600 800 1000 1200 1400 1600
Current - mA
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-45
EFV1-12-O - Proportional valve
Proportional flow, normally open spool
Up to 104 L/min (27.5 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10
4G 1/2" BSPP 02-161817 02-169815 Only required when valve has special
features, omitted if “00”.
6G 3/4" BSPP 02-161816 02-169814
4 Logic 10T SAE 10 02-160642 02-161070
0 - Normally open 12T SAE 12 02-160646 02-169816
Note: Both the manifold and port plug are required.
5 Flow rating See section J for housing details.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-46 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EFV1-12-O - Proportional Valve
Proportional flow, normally open spool
Up to 104 L/min (27.5 USgpm) • 210 bar (3000 psi)
Dimensions Torque cartridge in housing Note: Port 1 is unused and Note: EFV1-12 with DIN-
mm (inch) S - 136-149 Nm (100-110 ft lbs) must be plugged. 43650 connector shown.
Cartridge only
B
44,2 (1.74)
32,8 (1.29)
19,1 (0.75)
1.26
86,3
(3.40)
64,0
(2.52)
68,6
(2.70) 3
86.3
3.40
10.31 12.7 25.4
25.4 (0.406) (0.50)
(1.00) (1.00)
3 51.06
108 (2.03)
(4.25) 2 82.55
28.7
(1.13) (3.250)
44.5
(1.75) 76.2
(3.00)
88.9
(3.50)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-47
ESV9-8-E - Proportional solenoid valve
4-way, 3-position, screw-in cartridge, proportional solenoid valve
Up to 11 L/min (2.9 USgpm) • Up to 250 bar (3600 psi)
2 4 Operation Features
COIL COIL In the de-energized (center) When solenoid B is energized, • Highly engineered
B A position, all ports are blocked. flow is directed from port 3 components
3 1 When solenoid A is energized, to port 4 and from port 2 to • Compact design with low
flow is directed from port 3 port 1. Port 1 is not intended pressure drop
B to port 2 and from port 4 to to be used as an inlet. • Designed for optimized
port 1. Port 1 is not intended linearity and hysteresis
to be used as an inlet.
• IP69K ToughCoils™
compatible
• Optional manual override
• Industry standard cavity tool
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure
Operating Pressure Port 1 (T) 210 bar (3,000 psi)
"COIL B" Operating Pressure Port 2,3 and 4 (A, P and B) 250 bar (3,600 psi)
Cartridge fatigue pressure (infinite life)
Port 1 (T) 210 bar (3,000 psi)
Port 2,3 and 4 (A, P and B) 250 bar (3,600 psi)
Rated burst pressure 750 bar (10,600 psi) per NFPA/T2-6-1 R2-2000
Rated flow 11.0 L/min (2.9 USgpm)
"COIL A
Temperature range -40° to 120°C (-40° to 248°F)
Coil power 23 W*
Maximum hysteresis 7.0%
Step response 70 ms to 90% flow
Cavity C-8-4
4 Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
3 Filtration Cleanliness code 18/16/13
Standard housing material Steel
2
Weight including coils 0.5 kg (1.1 lbs)
Seal kit 02-160757 (Buna-N), 02-160758 (Viton®)
1
Internal leakage 165 cm3/min (10 in3/min) max. @ 210 bar (3000 psi)
Viton is a registered trademark of E.I. DuPont.
*AC coils must be used with a rectifying connector.
A 12
all ports closed in the
1
de-energized position. This 20
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-48 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
ESV9-8-F - Proportional solenoid valve
4-way, 3-position, screw-in cartridge, proportional solenoid valve
Up to 11 L/min (2.9 USgpm) • Up to 250 bar (3600 psi)
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure
Operating Pressure Port 1 (T) 210 bar (3,000 psi)
"COIL B" Operating Pressure Port 2,3 and 4 (A, P and B) 250 bar (3,600 psi)
Cartridge fatigue pressure (infinite life)
Port 1 (T) 210 bar (3,000 psi)
Port 2,3 and 4 (A, P and B) 250 bar (3,600 psi)
Rated burst pressure 750 bar (10,600 psi) per NFPA/T2-6-1 R2-2000
Rated flow 11.0 L/min (2.9 USgpm)
"COIL A
Temperature range -40° to 120°C (-40° to 248°F)
Coil power 23 W**
Maximum hysteresis 7.0%
Step response 70 ms to 90% flow
Cavity C-8-4
2 12
de-energized condition Port 2
Flow(lpm)/Pressure(bar)
1
and 4 are open to tank with 2
the inlet port 3 blocked. This
valve is ideal for moderate 1
flow applications where an
actuator needs to be moved in 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-49
ESV9-8 - Proportional solenoid valve
4-way, 3-position, screw-in cartridge, proportional solenoid valve
Up to 11 L/min (2.9 USgpm) • Up to 250 bar (3600 psi)
1 2 3 4 5 6 7 8 9 10 11 12
0 Cartridge only 1
These model digits are not stamped on
the valve.
A2G 1/4” BSPP 02-160747
A3G 3/8” BSPP 02-160748
Warning
A6H SAE 6 02-160749 Aluminum housings can
A8H SAE 8 02-160750 be used for pressures up
to 210 bar (3000 psi). Steel
S2G 1/4” BSPP 02-160753
housings must be used for
S3G 3/8” BSPP 02-160754 operating pressures above
S6T SAE 6 02-160751
210 bar (3000 psi).
8 Connection type
Blank - No coil
N - Deutsch male, DT04-2P, integrated
G - DIN 43650
W - Flying lead
Y - Amp Jr (DC Only) Mating Connector:
AMP 963040-3 or equivalent
D0 - MetriPackR 150 Male, Integrated (DC Only) Mating
Connector: Delphi 12052641
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-50 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
ESV9-8 - Proportional solenoid valve
4-way, 3-position, screw-in cartridge, proportional solenoid valve
Up to 11 L/min (2.9 USgpm) • 250 bar (3000 psi)
"COIL B"
Spare parts 131.1 "COIL B"
[ 5.16 ]
Coil Nut for MO 565559
0.97
Coil Nut without MO 565558 [ 3.82 ]
2 2
1 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-51
ESV9-10 - Proportional solenoid valve
4-way, 3-position, screw-in cartridge, proportional solenoid valve
Up to 22 L/min (5.8 USgpm) • Up to 250 bar (3600 psi)
1 2 3 4 5 6 7 8 9 10 11 12
0 Cartridge only 1
These model digits are not stamped on
the valve.
A2G 1/4” BSPP 02-185804
A3G 3/8” BSPP 02-185805
Warning
A6H SAE 6 02-185802 Aluminum housings can
A8H SAE 8 02-185803 be used for pressures up
to 210 bar (3000 psi). Steel
S2G 1/4” BSPP 02-175139
housings must be used for
S3G 3/8” BSPP 02-175140 operating pressures above
S6T SAE 6 02-175137
210 bar (3000 psi).
8 Connection type
Blank - No coil
N - Deutsch male, DT04-2P, integrated
G - DIN 43650
W - Flying lead
Y - Amp Jr (DC Only) Mating Connector:
AMP 963040-3 or equivalent
D0 - MetriPackR 150 Male, Integrated (DC Only) Mating
Connector: Delphi 12052641
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-52 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
ESVL9-10-E - Proportional solenoid valve
5 Port, 3-position, screw-in cartridge, proportional solenoid valve
Up to 23 L/min (USgpm) • Up to 250 bar (3600 psi)
Performance data
Profile view Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure for all ports 250 bar (3,600 psi)
Cartridge fatigue pressure (infinite life) for all ports 250 bar (3,600 psi)
Rated burst pressure 750 bar (10,600 psi) per NFPA/T2-6-1 R2-2000
Coil B
Max. flow 23 L/min (2.9 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Coil power 28 W*
Recommended PWM and Dither frequency 100 Hz
Coil A Cavity C-10-5S
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing material Steel
5
Weight including coils with check valve 1.25 KG
4
Seal kit Need to check
3 Internal leakage 250 cm3/min (10 in3/min) max. @ 210 bar (3000 psi)
2 Viton is a registered trademark of E.I. DuPont.
*AC coils must be used with a rectifying connector.
1
A 12
all ports closed in the
1
de-energized position. This 20
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-53
ESVL9-10-F - Proportional solenoid valve
5 Port, 3-position, screw-in cartridge, proportional solenoid valve
Up to 23 L/min (USgpm) • Up to 250 bar (3600 psi)
With Load Sense check valve Operation Port 1 is connected to system linearity and hysteresis
In the de-energized (center) load sense line • IP69K ToughCoils™
position, port 3, port 2, and Features compatible
port 4 are open to each other • Integrated LS check feature • Optional manual override
while port 5 is blocked. When in std. cavity • Industry standard cavity
B solenoid A is energized, flow is
• Highly engineered tool.
directed from port 5 to port 4
and from port 2 to port 3. When components
Without Load Sense check valve solenoid B is energized, flow is • Compact design with low
directed from port 5 to port 2 pressure drop
and from port 4 to port 3. • Designed for optimized
Performance data
Profile view Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure for all ports 250 bar (3,600 psi)
Cartridge fatigue pressure (infinite life) for all ports 250 bar (3,600 psi)
Rated burst pressure 750 bar (10,600 psi) per NFPA/T2-6-1 R2-2000
Coil B Max. flow 23 L/min (2.9 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Coil power 28 W*
Recommended PWM and Dither frequency 100 Hz
25 12
position, direct acting, spool B
type solenoid valve. In the 1
20
de-energized condition Port 2
and 4 are open to tank with 15
the inlet port 5 blocked. This C
valve is ideal for moderate 10
flow applications where an
actuator needs to be moved in 5 2
both directions and stopped in
any position while allowing the 0
0 5 10 15 20 25 30
1 1 1 12 1 2 2 1 12 1 1 1
service ports to decay to tank Current (A)
pressure in the de-energized
condition. A - Port 5 to port 4 C - Port 2 to port 3
B - Port 5 to port 2 D - Port 4 to port 3
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-54 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
ESVL9-10 - Proportional solenoid valve
5 Port, 3-position, screw-in cartridge, proportional solenoid valve
Up to 23 L/min (USgpm) • Up to 250 bar (3600 psi)
1 2 3 4 5 6 7 8 9 10 11 12
2 Size
10 Coil special feature
10 - 10 size
00 - None
0 Cartridge only
S3G 3/8” BSPP 6042921-001 F
See section J for housing details.
8 Connection type
12 Design code
Blank - No coil
G - DIN 43650-A Integrated A - Design code 00
N - Deutsch male, DT04-2P, Integrated
D - Metric - Pack 150 male, Integrated 1
These model digits are not stamped on
F - Weather - Pack (packard) male, on wire leads the valve.
W - Lead wire
Y - AMP Junior, Integrated
Warning
See Section C for coil details. Aluminum housings can
be used for pressures up
to 210 bar (3000 psi). Steel
housings must be used for
operating pressures above
210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-55
ESVL9-10 - Proportional solenoid valve
5 Port, 3-position, screw-in cartridge, proportional solenoid valve
Up to 23 L/min (USgpm) • Up to 250 bar (3600 psi)
43.6
[1.72]
22.225 HEX A/F
[0.875]
23.8
[0.94] TORQUE 5.0-8.0 N.M
43.6 [4-6 lbf-ft]
[1.72] n 35.8
[1.41]
n 45.9
[1.81]
17.5 TORQUE 5-8 N.M
[0.69] [4-6 lbf-ft]
n 45.9
[1.81]
Spare parts 145.1
[5.71]
Coil Nut for MO 6038813-001
138.7
Coil Nut without MO 02-148332 [5.46]
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-56 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
PFR24A - Proportional valve
Proportional bi-directional, normally closed poppet
18 L/min at 75% • 210 bar (3000 psi)
288 20
Flow - l/min
Pressure - psi
Pressure - bar
25 6.6 6.5 25
Flow - litres/min
20 5.3
144 10 3.9 15
72 5 15 3.9 2.6 10
50% of rated amps
0 0 10 2.6 1.3 5
2 4 6 8 0
0
Flow - US gpm 5 1.3 0 870 2030 3190
0 0 Pressure - psi
0 20 40 60 80 100
% rated amps
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-57
PFR24A - Proportional Valve
Proportional bi-directional, normally closed poppet
18 L/min at 75% • 210 bar (3000 psi)
1 2 3 4 5 6
Dimensions
mm (inch)
49.00 (1.90)
50.0 (1.97)
21.00 5.00 A/F 35.50
(0.82) (1.40)
7.00 10.00 A/F
(0.28)
2 holes 12.8
Ø6.8 (0.27) (0.50)
thro’
2 22.0
(0.87) 50.8
92.00 (2.00
(3.62) 50.00 1
(1.97) 16.0 6.0 15.9
(0.63) (0.24) (0.63)
6.0 (0.24) 31.8
19.0 (0.75) (1.25)
24.00 A/F
16.90
27.8 (0.66)
(1.09) 3/4”-16-UNF-2A 2
Ø15.80 (0.62) 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-58 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EFV2-12-C - Proportional valve
Proportional flow, normally closed spool
Up to 114 L/min (30 USgpm) • 210 bar (3000 psi)
1 Operation Features
Current supplied to the coil The valve will regulate flow Hardened and ground working
controls the valve. At zero out of port 3 regardless of parts to give long life with
current, the valve is fully downstream system pressure. good control; Compact design
closed from port 1 to port 3. As current is increased to the with low pressure drop.IP69K
At 1500 to 1600 mA (12V coil) solenoid the flow out of Tough coil compatibility, B
the valve is fully open. port 3 will increase. continuously rated.
Performance data
3 2 Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Sectional view Typical application pressure 210 bar (3000 psi)
Cartridge endurance rating 1million cycles
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi) NFPA rated
Rated flow “A” Spool-max regulated flow (by-pass mode): 57 L/min (15 USgpm)
max regulated flow (2 port mode): 53 L/min (14 USgpm)
max input flow (input flow): 114 L/min (30 USgpm)
“B” Spool-max regulated flow (by-pass mode): 38 L/min (10 USgpm)
max regulated flow (2 port mode): 31 L/min (8 USgpm)
max input flow (input flow): 114 L/min (30 USgpm)
Note: Max regulated flow may decrease slightly during compensation.
Internal leakage (fully closed) 240 cm3/min (15 in3/min) @ 3000 PSID
Nominal supply voltage 12/24 V
Current to fully open valve 1600 6 200 mA (12V coil), 800 6 100 mA (24V coil)
Current to fully close valve 350 6 100 mA (12V coil), 175 6 50 mA (24V coil)
Recommended PWM frequency 200-400 Hz
Coil resistance 4.7v V/12V, 19.0 V/24V
3
Cartridge only 0,37 kg (0.82 lb), cartridge with coil and end nut 0,73 kg
Mass (1.62 lb)
2
Temperature range -30° to 90°C (-22° to 194°F)
Maximum oil temperature 120°C (248°F)
1 Maximum internal coil temperature 200°C (392°F)
Cavity C-12-3
All general purpose hydraulics fluids such as: MIL-H-5606, SAE 10, SAE
Fluids 20, DTE 24, etc.
Description
Filtration Cleanliness code 18/16/13
This is a three port pressure
compensated proportional Housing material (standard) Aluminum or steel
normally closed flow control Hysterisis 1.5 USgpm with 400Hz PWM driver
screw in cartridge valve. The
Seal kit 9900171-000 (Buna-N), 9900172-000 (Viton®)
valve can be used as a priority
or a restrictive style valve Viton is a registered trademark of E.I. DuPont
allowing the valve to control
the outlet flow with the option
of the excess flow being used
for another system.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-59
EFV2-12-C - Proportional valve
Up to 114 L/min (30 USgpm) • 210 bar (3000 psi)
Performance Curves
250 B
200 100
150 A
50
100
50
0
0
0 5 10 15 20 25 30 0.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5
Flow-US gpm Flow-US gpm
18 A - A spool
16 B - B spool
14 2 Port
By-Pass Mode Mode
12
Flow (GPM)
10 By-Pass
Mode
8
6
A 2 Port Mode
4
B
2
0
0 200 400 600 800 1000 1200 1400 1600 1700
Current (mA)
20.0 20.0
17.5 G 17.5 G
15.0 15.0
Flow-US gpm
F
Flow-US gpm
E F
12.5 12.5 E
10.0 D 10.0
D
7.5 7.5
C C
5.0 5.0
2.5 B B
2.5
0.0 A A
0.0
0 500 1000 1500 2000 2500 3000 3500 0 500 1000 1500 2000 2500 3000 3500
Pressure - psi Pressure - psi
A - 0.3 AMPS B - 0.6 AMPS C - 0.9 AMPS A - 0.3 AMPS B - 0.6 AMPS C - 0.9 AMPS
D - 1.2 AMPS E - 1.5 AMPS F - 1.8 AMPS D - 1.2 AMPS E - 1.5 AMPS F - 1.8 AMPS
G - 2.0 AMPS G - 2.0 AMPS
Note: Pressure Compensation curves are shown for “B” spool valves.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-60 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EFV2-12-C - Proportional valve
Proportional flow, normally closed spool
Up to 114 L/min (30 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10
5 Flow rating Note: Both the manifold and port plug are required.
See section J for housing details.
A - 15 USgpm @ 180 PSID
B - 10 USgpm @ 180 PSID
See specifications
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-61
EFV2-12-C - Proportional Valve
Proportional flow, normally closed spool
Up to 114 L/min (30 USgpm) • 210 bar (3000 psi)
B
Cartridge only
44,2 (1.74)
32,8 (1.29)
19,1 (0.75)
1.26
86,3
(3.40)
64,0
(2.52)
68,6
(2.70) 3
86.3
3.40
10.31 12.7 25.4
25.4 (0.406) (0.50)
(1.00) (1.00)
3 51.06
108 (2.03)
(4.25) 2 82.55
28.7
(1.13) (3.250)
44.5
(1.75) 76.2
(3.00)
88.9
(3.50)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-62 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EFV2-12-O - Proportional valve
Proportional flow, normally open spool
Up to 114 L/min (30 USgpm) • 210 bar (3000 psi)
1
Operation Features
Current supplied to the coil The valve will regulate flow Hardened and ground working
controls the valve. At zero out of port 3 regardless of parts to give long life with
current, the valve is fully downstream system pressure. good control; Compact design
open from port 1 to port 3. At As current is increased to the with low pressure drop.IP69K
1600 mA (12V coil) the valve is solenoid the flow out of Tough coil compatibility, B
fully closed. port 3 will decrease. continuously rated.
Performance data
Ratings and specifications
3 2 Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Profile view Typical application pressure 210 bar (3000 psi)
Cartridge endurance rating 1million cycles
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi) NFPA rated
“A” Spool-max regulated flow (by-pass mode): 53 L/min (14 USgpm)
max regulated flow (2 port mode): 42 L/min (11 USgpm)
max input flow (input flow): 114 L/min (30 USgpm)
“B” Spool-max regulated flow (by-pass mode): 38 L/min (10 USgpm)
max regulated flow (2 port mode): 31 L/min (8 USgpm)
max input flow (input flow): 114 L/min (30 USgpm)
Rated flow Note: Max regulated flow may decrease slightly during compensation.
Internal leakage (fully closed) 77-483 cm3/min (5-30 in3/min) @ 3000 PSID
Nominal supply voltage 12/24 V
Current to fully open valve 350 6 100 mA (12V coil), 800 6 100 mA (24V coil)
Current to fully close valve 1600 6 200 mA (12V coil), 800 6 100 mA (24V coil)
Recommended PWM frequency 200-400 Hz
Coil resistance 4.7v V/12V, 19.0 V/24V
Cartridge only 0,37 kg (0.82 lb), cartridge with coil and end nut 0,73 kg
3 Mass (1.62 lb)
Temperature range -30° to 90°C (-22° to 194°F)
2
Maximum oil temperature 120°C (248°F)
Maximum internal coil temperature 200°C (392°F)
1 Cavity C-12-3
All general purpose hydraulics fluids such as: MIL-H-5606, SAE 10, SAE
Fluids 20, DTE 24, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Description Hysterisis 1.5 USgpm with 400Hz PWM driver
This is a three port pressure
compensated normally open Seal kit 9900171-000 (Buna-N), 9900172-000 (Viton®)
proportional flow control screw Viton is a registered trademark of E.I. DuPont.
in cartridge valve. The valve
can be used as a priority or a
restrictive style valve allowing
the valve to control the outlet
flow with the option of the
excess flow being used for
another system.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-63
EFV2-12-O - Proportional valve
Up to 114 L/min (30 USgpm) • 210 bar (3000 psi)
Performance Curves
400 180
Pressure Drop (PSI)
Flow (GPM)
10 10 By-Pass Mode
8 8
2 Port Mode
6 6
2 Port Mode
4 4
2 2
0 0
Current (Milli-amps)
Current (Milli-amps)
GPM GPM
15.0 15.0
A
12.5 12.5
A
10.0 10.0
B B
7.5 7.5
C C
5.0 5.0
D D
2.5 2.5
E F E
0.0 0.0 F
0 500 1000 1500 2000 2500 3000 3500 4000 0 500 1000 1500 2000 2500 3000 3500 4000
A 0 amps B 0.3 amps C 0.6 amps PSI A 0 amps B 0.3 amps C 0.6 amps PSI
D 0.9 amps E 1.2 amps F 1.5 amps D 0.9 amps E 1.2 amps F 1.5 amps
Note: Pressure Compensation curves are shown for “B” spool valves.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-64 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EFV2-12-O - Proportional valve
Proportional flow, normally open spool
Up to 114 L/min (30 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-65
EFV2-12-O - Proportional valve
Proportional flow, normally open spool
Up to 114 L/min (30 USgpm) • 210 bar (3000 psi)
Cartridge only
B
44,2 (1.74)
32,8 (1.29)
19,1 (0.75)
1.26
86,3
(3.40)
64,0
(2.52)
68,6
(2.70) 3
86.3
3.40
10.31 12.7 25.4
25.4 (0.406) (0.50)
(1.00) (1.00)
3 51.06
108 (2.03)
(4.25) 2 82.55
28.7
(1.13) (3.250)
44.5
(1.75) 76.2
(3.00)
88.9
(3.50)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-66 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
PDR21A - Proportional valve
Proportional relief
1.5 L/min (.3 USgpm) • 350 bar (5000 psi)
75%
Pressure - bar
Pressure - bar
Pressure - psi
bar 50%
Pressure - bar
bar
3000 210 3000 210
100 7 50%
14-220 bar 2000 140 2000 75%
25%
140
5-107 50%
50 3.5 bar 1000 70
5-107 bar 1000 70 25%
25%
0 0 0 0 0 0
0 0.1 0.2 0.3 0.4 0 20 40 60 80 100 0 0.1 0.2 0.3 0.4
Flow - US gpm % of rated current Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-67
PDR21A - Proportional valve
Proportional relief
1.5 L/min (.3 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7
4 Manual override
6 - Screw
Dimensions
mm (inch)
49.00 (1.90)
5.00 A/F 35.50
21.00 Man override
(0.82) (1.40)
10.00 A/F
Man override
locknut
12.7 28.8
(0.50) (1.13)
2
44.8 50.8
101.00 (1.76) (2.00)
(3.98) 50.00 1 15.9
16.0 (0.63) (0.63) 31.8
(1.97) (1.25)
31.0 (1.22) 2 holes
44.0 (1.73) Ø6.8 (0.27) through
50.0 (1.97)
24.0 A/F
3/4”-16 UNF
19.40
29.00 (0.76)
(1.14) T(2)
Ø12.60
(0.50) P(1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-68 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
IRV1-10 - Proportional valve
Proportional inverse relief, poppet
1 L/min (.25 USgpm) • 210 bar (3000 psi)
2 Operation Features
The IRV1-10 proportional relief When the pressure at port Hardened and ground
is spring biased closed to the 1 (inlet) is enough to components for accurate
highest setting. Increasing overcome the spring force, the consistent control and a long
current to the coil will poppet lifts and allows flow life. IP69K Tough coil
proportionally decrease the from port 1 to port 2 (outlet). compatibility continuously B
pressure setting. rated.
165.5
Pressure (bar)
2400
2200
2000 137.10
1800
C 110.3
1600
1400
1200 82.8
1000 D
600 41.3
E
400
200 13.8
0
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
Amps
Pressure Differential
A - 3500 psi
B - 3000 psi
C - 2000 psi
D - 1000 psi
E - 500 psi
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-69
IRV1-10 - Proportional valve
Proportional inverse relief, poppet
1 L/min (.25 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9 10 11 12
Dimensions
mm (inch)
Cartridge only Installation drawing
19,0 HEX
(0.75)
72.4
(2.85) 25.4
(1.00)
72,4
(2.85) 20.8
2 (0.81)
2X 7.1 63.5
(0.28) (2.50)
25,4 HEX
19.0
(1.00) 1 (0.75)
Ø 15,8
(.622)
Ø 38,9
(1.53)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-70 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
IRV2-10 - Proportional valve
Proportional inverse relief, Spool
57 L/min (15 USgpm) • 240 bar (3500 psi)
Operation Features
The IRV2-10 proportional This valve remains closed Hardened and ground
relief is spring biased closed between port 1 and 2 until components for accurate
to highest setting. Increasing the predetermined pressure consistent control and a long
current to the coil will setting has been reached at life. Pilot style to give accurate
proportionally decrease the port 1, overcoming the spring pressure control over varying B
pressure setting. force and opening the spool to flows. IP9K Tough coil
allow flow from port 1 to 2. compatibility continuously
rated.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 240 bar (3500 psi)
Cartridge fatigue pressure (infinite life) 240 bar (3500 psi)
Maximum pressure setting range 35 bar to 240 bar (500 to 3500 psi)
Rated Flow 57 lpm ( 15 US gpm)
Nominal supply voltage 12/24 V
Cavity C-10-2
Internal leakage, port 1 to port 2 114 cm /min. (7 in /min) @ 210 bar
3 3
165.5
Pressure (bar)
2400
2200
2000 137.10
1800
C 110.3
1600
1400
1200 82.8
1000 D
600 41.3
E
400
200 13.8
0
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
Amps
Pressure Differential
A - 3500 psi
B - 3000 psi
C - 2000 psi
D - 1000 psi
E - 500 psi
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-71
IRV2-10 - Proportional valve
Proportional inverse relief, Spool
57 L/min (15 USgpm) • 240 bar (3500 psi)
1 2 3 4 5 6 7 8 9 10 11 12
Dimensions
mm (inch) Installation drawing
Cartridge only
Cartridge Only
19,0 HEX
(0.75)
72.4
(2.85) 25.4
(1.00)
72,4
(2.85) 20.8
2 (0.81)
2X 7.1 63.5
(0.28) (2.50)
25,4 HEX
19.0
(1.00) 1 (0.75)
Ø 15,8
(.622)
Ø 38,9
(1.53)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-72 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
ERV1-10 - Proportional valve
Proportional relief, spool
3.8 - 6.0 L/min (1 - 15 USgpm) • 240 bar (3500 psi)
2 Operation Features
This valve remains closed at port 1, overcoming the Hardened and ground
between port 1 and 2 until electrical force and opening components for accurate
the predetermined pressure the spool to allow flow from consistent control and a long
setting has been reached port 1 to port 2. life. Pilot style to give accurate
pressure control over varying B
flows. IP69K Tough coil
compatibility continuously
1 rated.
Performance data
Sectional view Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 2-240 bar (30-3500 psi)
Cartridge fatigue pressure (infinite life) 240 bar (3500 psi)
Rated flow 3.8-60,0 L/min (1-15 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-10-2
All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10,
Fluids SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,44 kg (.98 lbs)
Seal kit 565803 (Buna-N), 889627 (Viton®)
Viton is a registered trademark of E.I. DuPont
150
2000
4
100 50
Description
This is a proportional internally 1000 2
pilot operated screw in 50
cartridge relief valve. Good
control over large flows 0 0
0 0
for the physical size of the 5 10 15
cartridge. Ideal for the control 5 10 15
Flow - USgpm (105 SUS oil @ 120°F) Flow - USgpm (105 SUS oil @ 120°F)
of pressure under varying flow
conditions.
Performance curves Zero outlet pressure
Cartridges only
bar psi Step response Volts Pressure gain
4000 280
Pressure - bar
Pressure - psi
210 3000 9
3000 210
Inputvoltage
Pressure
70 1000 3 1000 70
0
0 0.1 0.2 0.3 0.4 seconds 0 3 6 9 volts
Response tim e Input voltage @ 25°C (77°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-73
ERV1-10 - Proportional valve
Proportional relief, spool
3.8 L/min (60 USgpm) • 240 bar (3500 psi)
1 2 3 4 5 6 7 8
Ø 38,9
20.8
(1.53) 2X 7.1 2 (0.81)
(0.28) 63.5
19,0 (0.75) Hex (2.50)
19.0
73,0 1 (0.75)
(2.87)
9.5
(0.37) 63.5
(2.50)
25,4 (1.00) Hex
33,3 Warning
(1.31) 0.875"-14 Thd.
Maintain 5-8 Nm(4-6 ft lbs)
2 maximum torque on valve
tube nut.Over tightening may
1 cause valve failure.
Ø 15,80 (0.622)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-74 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
ERV1-16 - Proportional valve
Proportional relief, spool
Up to 132 L/min (35 USgpm) • 210 bar (3000 psi)
2 Operation Features
This valve remains closed at port 1, overcoming the Hardened and ground
between port 1 and 2 until electrical force and opening components for accurate
the predetermined pressure the spool to allow flow from consistent control and a long
setting has been reached port 1 to port 2. life. Pilot style to give accurate
pressure control over varying B
flows. IP69K Tough coil
compatibility continuously
1 rated.
Performance data
Sectional view Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 3,5-210 bar (50-3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 7,6-132,0 L/min (2-35 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-16-2
All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10,
Fluids SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,44 kg (.98 lbs)
Seal kit 565810 (Buna-N), 889609 (Viton®)
Viton is a registered trademark of E.I. DuPont
Pressure - bar
Pressure - psi
Pressure - bar
2000 140
60 4
Description 1000 70
This is a proportional internally 30 2
pilot operated screw in
cartridge relief valve. Good 0 0
10 20 30 40 50 0 0
control over large flows for the
physical size of the cartridge. Flow - USgpm (105 SUS oil @ 120°F) 10 20 30 40 50
Ideal for the control of pressure Flow - USgpm (105 SUS oil @ 120°F)
under varying flow conditions.
Pressure -bar
Inputvoltage
3000 210
Pressure
140 2000 6
2000 140
70 1000 3 1000 70
0
0 0.1 0.2 0.3 0.4 seconds
0 3 6 9 volts
Response tim e
Inputvoltage @ 25°C (77°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-75
ERV1-16 - Proportional valve
Proportional relief, spool
Up to 132 L/min (35 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8
29,6
(1.16)
77.9
(3.07)
31.8
(1.25)
Ø 38,9 28.4
2 (1.12)
(1.53) 63.5
2.50 2X 8.74
19,0 (0.75) 88.9 (0.344)
Hex Torque (3.50)
to 5-8 Nm 1
44,4 Warning
(1.75) 1.312"-12 Thd. Maintain 5-8 Nm (4-6 ft lbs)
2 maximum torque on valve
tube nut. Over tightening may
1 cause valve failure.
Ø 28,55 (1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-76 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
PPD22A - Proportional valve
Proportional reducing/relief, spool
20 L/min (5.4 USgpm) • 210 bar (3000 psi)
360 25
580 40
Pressure - psi
Pressure - bar
Pressure - psi
Pressure - bar
288 20
435 30 PPD2 2AH
216 15
2-1 PPD2 2A
290 20 144 10
145 10 72 5
1-3
0 0
0 0
0 20 40 60 80 100
0 1.06 2.12 3.18 4.24 5.3
Flow - US gpm % of rated current
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-77
PPD22A - Proportional valve
Proportional Reducing/Relief, Spool
20 L/min (5.4 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
5 Voltage
12 - 12 VDC
24 - 24 VDC
Dimensions
mm (inch)
21.0
(0.82) 7.0 35.5 (1.40)
(0.28) 2 holes
Ø7.1 (0.28)
thro’
28.3 11.1 14.7
(1.11) (0.44) (0.58)
2 3
38.1
92.0 (1.50)
(3.62) 1
50.0
(1.97) 28.6 12.7
(1.13) (0.50)
4.8 47.6 25.4
(0.19) (1.87) (1.00)
24.0 A/F
3/4”-16-UNF-2A
16.9
(0.67)
39.8 3 (Tank)
(1.57)
2 (Pressure)
1 (Regulated)
Ø14.2 (0.56)
Ø15.8 (0.62)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-78 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EPRV2-8 - Proportional valve
Proportional reducing/relief, spool
7.6 L/min (2 USgpm) • 35 bar (500 psi)
Operation Features
In the de-energized position, If the pressure at port 1 Hardened and ground
pressure inlet port 2 is closed exceeds the setting of the components for accurate
and reduced pressure port 1 valve, the spool will shift consistent control and a long
is open to return port 3. As further and relieve to port 3. life. IP69K Tough coil
electrical current is increased, compatibility continuously B
port 2 opens to port 1 and rated.
port 3 closes, proportionally
increasing pressure at port 1.
Sectional view
Performance data
Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Maximum inlet pressure 35 bar (500 psi)
Cartridge fatigue pressure (infinite life) 35 bar (500 psi)
Reduced pressure range 0-22 bar (0-320 psi)
Maximum operating flow 7,6 L/min (2 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-8-3
Fluids All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10,
SAE 20 etc.
Filtration Cleanliness code 18/16/13
Recommended PWM frequency 150 Hz
Hysterisis @ 150 Hz PWM 5%
3 (T) Housing material (standard) Aluminum
Weight including coil 0,29 kg (.64 lbs)
Seal kit 02-179451 (Buna-N), 02-179452 (Viton®)
2 (P) Viton is a registered trademark of E.I. DuPont
6 28
Pressure drop - psi
75 400
Pressure - bar
This is a low pressure
Pressure - psi
pressure - bar
300 21
Amperage
400 0.8
Reduced
28 Amperage
decreasing
200 14
14 200 0.4
100 Amperage 7
increasing
0
0 0.1 0.2 0.3 0.4 .1 .2 .3 .4 (24 VDC)
Time - sec
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-79
EPRV2-8 - Proportional valve
Proportional reducing/relief, spool
7.6 L/min (2 USgpm) • 35 bar (500 psi)
1 2 3 4 5 6 7 8 9
6 Voltage rating
4 Valve housing material 00 - No coil 9 Special features
Omit for cartridge only 12D - 12VDC *Optional arc suppression diode. 00 - None
24D - 24VDC Note: This valve uses the standard
A - Aluminum S series coils, see section C for coil Only required if valve has special
12B - 12VDC/w diode*
part numbers and specifications. features, omitted if “00.”
24B - 24VDC/w diode*
3
67.3 2 2X7.14
31,8 15.5 (2.65) (0.281)
( 1.25 ) (0.61)
29.8
(1.17)
1
3.4 56.74
(0.13) (2.234)
63.5
(2.50)
Warning
Maintain 5-8 Nm (4-6 ft lbs)
1 maximum torque on valve
tube nut.Over tightening may
cause valve failure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-80 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EPPV5 - Proportional Valve
Proportional pressure reducing valve
8.0 L/min (2.1 USgpm) • 50 bar (725 psi)
Port A to T Port P to A
Description 30
25 bar 30
This is a low pressure
Pressure drop bar
25
proportional direct acting 32 bar 25
bar
32 bar
pressure reducing cartridge 20 25 bar
20
valve. It is ideal for the control 15
of compensators on a pump or 15
brake, proportional valve spool 10
20 bar 10
and clutch systems on a 5
20 bar
transmission circuit . 5
0
0 1 2 3 4 5 6 7 8 0
0 1 2 3 4 5 6 7 8
flow (l/min) flow (l/min)
PA (I2) 25 bar
Reduced pressure bar
30
pA (I2) *90%
25
20
20 bar
15
PA (I2) *10%
10
PA (I=0)
5
time
50ms 50ms 0
0 100 200 300 400 500 600 700 800
electrical signal
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-81
EPPV5 - Proportional Valve
Proportional pressure reducing valve/relief, spool
8.0 L/min (2.1 USgpm) • 50 bar (725 psi)
1 2 3 4 5 6 7 8 9
B
6 Voltage Rating
1 Function 4 Control pressure
12 - 12V
EPPV5 - Proportional pressure 20 - 20 bar (290 psi) 24 - 24V
reducing valve 25 - 25 bar (360 psi)
32 - 32 bar (460 psi)
7 Voltage type
2 Seal material
5 Port size D - DC
H - Buna-HBNR
8 Connector type
3 Manual override
0ption Code Port size N - Deutsch DT04-2P
0- Manual override not 0 Cartridge only
available 9 Special features
00 - None
Cartridge only
Dimensions (mm)
P T
(ø29.3)
(40.2)
(49)
(95)
(ø4.5 (2x))
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-82 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EPPV6 - Proportional Valve
Proportional pressure reducing valve
8.0 L/min (2.1 USgpm) • 50 bar (725 psi)
Profile view
Performance data
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Maximum inlet pressure, A(1) and P(2) 50 bar (725 psi)
Maximum inlet pressure, Tank (3) 30 bar (425 psi)
In accordance with control pressure
Reduced pressure range range in model code
Maximum operating flow 8.0 L/min (2.1 USgpm)
Temperature range -40° to 105°C (-40° to 221°F)
Cavity TC06023
Fluids Mineral oil according to DIN 51524
Filtration Cleanliness code 20/18/15
Recommended PWM frequency 100 Hz
<0.7 bar (pA = 20)
3 <1.0 bar (pA = 25)
Hysterisis @100 Hz PWM <1.5 bar (pA = 35)
2 5.3 ohms +/-5% for 12V
Resistance 21.2 ohms +/-5% for 24V
1500 mA for 12V
Current 750 mA for 24V
Protection class Up to IP6K6 / IPX9K
20 20
pump or brake and clutch
bar
15 15
systems on a transmission
circuit. 10 10
20 bar
20 bar
5 5
0 0
0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8
pA-pt [bar] 40
32 bar
Reduced pressure bar
35
PA (I2) 30
pA (I2) *90% 25 bar
25
20
15 20 bar
PA (I2) *10%
10
PA (I=0)
5
time
50ms 50ms 0
0 100 200 300 400 500 600 700 800
electrical signal
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-83
EPPV6 - Proportional Valve
Proportional pressure reducing valve/relief, spool
8.0 L/min (2.1 USgpm) • 50 bar (725 psi)
1 2 3 4 5 6 7 8 9
B
6 Voltage rating
1 Function 4 Control pressure
12 - 12V
EPPV6 - Proportional pressure 20 - 20 bar (290 psi) 24 - 24V
reducing valve 32- 32 bar (460 psi)
7 Voltage type
2 Seal material 5 Port size
D - DC
Blank - NBR Buna
Code Port size
0 Cartridge only
8 Connector type
3 Manual override
option Y - AMP Jr Power Timer
M- with manual override
9 Special features
00 - None
Cartridge only
Dimensions (mm)
P T
(ø32.5)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-84 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EPRV1-10 - Proportional valve
Proportional reducing/relief, spool
7.6 L/min (2 USgpm) • 35 bar (500 psi)
Description Operation
The EPRV1-10 is an electric, This valve remains open from at port 1, the spool shifts If the pressure at port 1
proportionally controlled, port 2 to port 1 (port 3 must to restrict the inlet flow at exceeds the setting of the
internally pilot operated, spool be vented). Once the predete port 2, which regulates the valve, the spool will shift
type, screw-in relief valve. mined pressure\is reached pressure at port 1. farther and relieve to port 3.
B
Flow - L/min (28,0 cSt oil @ 49°C) Flow - L/min (28,0 cSt oil @ 49°C)
7 4 0 4 7 7 4 0 4 7
3 600 42 45 3
2
Pressure - bar
400
Pressure - psi
Pressure - bar
28
Pressure - psi
15 1
1
200 14
0 0 0 0
2 1 0 1 2 2 1 0 1 2
Flow - USgpm (135 SUS oil @ 120°F) Flow - USgpm (135 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-85
EPRV1-10 - Proportional valve
Proportional reducing/relief, spool
7.6 L/min (2 USgpm) • 35 bar (500 psi)
1 2 3 4 5 6 7 8
Cartridges only
Input voltage
0
0 0.1 0.2 0.3 0.4 seconds
Response time
Pressure gain
500 34
Pressure - psi
Pressure - bar
250 17
1
0 3 6 9 volts
Input voltage @ 25°C (77°F)
Valve is shown with “W” coil.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
B-86 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EPRV3-10- Proportional valve
Proportional reducing/relief, spool
30 L/min (8 USgpm) • 207 bar (3000 psi)
1500
C
1000
500
0
0 1 2 3 4 5 6 7 8
Flow (gpm)
Pressure override, de-energized
3200 A – EPRV3-10X-30-0-00
A
2800 B – EPRV3-10X-20-0-00
C – EPRV3-10X-10-0-00
2400
P1 Pressure
B
2000
1600
C
1200
800
400
0
0 1 2 3 4 5 6 7 8
Flow (gpm)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-87
EPRV3-10- Proportional valve
Proportional reducing/relief, spool
30 L/min (8 USgpm) • 207 bar (3000 psi)
1 2 3 4 5 6 7 8
3000 1
2800 A
Input Current (A)
2600
2400 0.8
2200
2000
1800 0.6
1600 B
1 1400
1200 0.4
1000
800
Valve is shown with “W” coil. 600 C 0.2
400
200
0 0
B-88 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EPRV1-16 - Proportional valve
Proportional reducing/relief, spool
38 L/min (10 USgpm) • 35 bar (500 psi)
1 Operation Features
This valve remains open If the pressure at port 1 Hardened and ground
from port 2 to port 1 (port 3 exceeds the setting of the components for accurate
must be vented). Once the valve, the spool will shift consistent control and a long
predetermined pressure is farther and relieve to port 3. life. IP69K Tough coil
reached at port 1, the spool compatibility continuously B
shifts to restrict the inlet flow rated.
at port 2, which regulates the
2 3
pressure at port 1.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 3,5-35 bar (0-500 psi)
Cartridge fatigue pressure (infinite life) 35 bar (500 psi)
Rated flow 0-38,0 L/min (0-10 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-16-3
All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10,
Fluids SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,9 kg (2.00 lbs)
Seal kit 565811 (Buna-N), 889599 (Viton®)
3 Viton is a registered trademark of E.I. DuPont.
Pressure - bar
Pressure - psi
Pressure - psi
Pressure - bar
400 28
25 2
200 14
0 0 0 0
10 5 0 5 10
10 5 0 5 10
Flow - USgpm (135 SUS oil @ 120°F)
Flow - USgpm (135 SUS oil @ 120°F)
Description
This is a low pressure Performance curves Zero outlet pressure
proportional pilot operated Cartridges only
pressure reducing valve with a
reverse relief screw in Pressure gain
cartridge valve. It is ideal for bar psi Step response volts 500 34
the control of compensators
Pressure -psi
Pressure -bar
systems on a transmission
Inputvoltage
14 200 3
0 3 6 9 volts
0
0 0,1 0,2 0,3 0,4 seconds Inputvoltage @ 25°C (77°F)
Response time
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-89
EPRV1-16 - Proportional valve
Proportional reducing/relief, spool
38 L/min (10 USgpm) • 35 bar (500 psi)
1 2 3 4 5 6 7 8
3
57
(2.42) 88.9 2
(3.50) 28.4
114.3 (1.12)
(4.50)
1
93.68 2X8.74
10.3 (3.688) (0.344)
(0.41)
114.3
(4.50)
Warning
Maintain 5-8 Nm (4-6 ft lbs)
maximum torque on valve
1 tube nut. Over tightening may
cause valve failure.
B-90 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
- Additional products, product lines, and services offered by Eaton -
For everyone,
ever one, it’s... Eaton seeks out and
tests the latest environ-
mentally acceptable and
biodegradable hydraulic
fluids...from all over the
world. By leading the
way for our customers
and their industries, we
are working to sustain
and safeguard the en-
vironment, everywhere
our products are at work.
©2008 Eaton Corporation
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com B-91
Hydraulic Screw-in Cartridge Valves (SiCV)
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—February 2018 www.eaton.com C-3
ToughCoils™
Information
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-4 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
ToughCoils
Model code S,P,J and H series coils
1 2 3 4 5 6 7 8
Thermal shock
Environmental protection Connector Ip65 Ip67 Ip69k dunk
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com C-5
ToughCoils
For 8 size solenoid valves
S & P series coils
12 DC 1.67
Voltage Type B
24 DC 0.83
36 DC 0.56
(+) (-)
24 AC 0.93
115 AC 0.19
230 AC 0.10
*Nominal voltage 25°C (77°F).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
ToughCoils
For 10, 12, 16 and 20 size solenoid valves
J & H series coils
G0** Q0 W0 N0 Y0 D0 J0
Voltage Connector Connector Connector Connector Connector Connector Connector
G0** Q0 W0 N0 Y0 D0 J0
Voltage Connector Connector Connector Connector Connector Connector Connector
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com C-7
S and P Series coils
Dimensions
28,0 [1.10]
Q0 W0
Spade connector Leadwire
N0 Y0
Deutsch Male DTO4-2P integrated connector AMP Junior timer integrated connector
29,7 33,9
[1.17] 24,1 [.95] [1.33] 25,4 [1.00]
D0 J0
Metri-Pack 150 Male, integrated connector Metri-Pack 280 Male, integrated connector
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
J Series coils
Dimensions
33,5 [1.32]
(.685) 29,5 [1.16]
31,5 [1.24]
C
Ø 38,9 [1.53] 12,9 [.51]
46,5 [1.83]
G0
DIN 43650-A Connector Shown with integrated MetriPack 150 Connector
29,7 [1.17]
31,5 [1.24]
Q0 W0
Spade connector Leadwire
35,3 [1.39]
36,8 1.45] 5,1 [.20]
N0 Y0
Deutsch male DTO4-2P integrated connector AMP Junior timer integrated connector
33,3 37,3
[1.31] 27,7 [1.09] [1.47] 28,9 [1.14]
D0 J0
Metri-Pack 150 Male, integrated connector Metri-Pack 280 Male, integrated connector
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com C-9
H Series coils
Dimensions
33,5 [1.32]
(.685) 29,5 [1.16]
31,5 [1.24]
29,7 [1.17]
31,5 [1.24]
Q0 W0
Spade connector Leadwire
35,3 [1.39]
36,8 1.45] 5,1 [.20]
N0 Y0
Deutsch male DTO4-2P integrated connector AMP Junior timer integrated connector
33,3 37,3
[1.31] 27,7 [1.09] [1.47] 28,9 [1.14]
D0 J0
Metri-Pack 150 Male, integrated connector Metri-Pack 280 Male, integrated connector
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-10 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
Large Tough Coils
Model Code L and R Series Coils
1 2 3 4 5 6 7 8 9 10
Thermal shock
Environmental protection Connector IP65 IP67 IP69K dunk
Caution
Coils may be hot
to touch if used in
continuous duty applications.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com C-11
Large Tough Coils
L & R Series Coils
12VDC – – 041A – – –
24VDC – – 042A – – –
For other voltages and connectors contact your Eaton representative.
12 DC 2.35
Voltage Type B
C 24 DC 1.17
(+) (-)
*Nominal voltage 25°C (77°F).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-12 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
L Series Large Toughcoils
36.02
[1.418]
REF
Ø 46.28
[1.822]
MAX THIS END
43.76
33.60 [1.723]
[1.323] REF NOM
45.85-45.99
Ø
[1.805-1.811] 22.64-22.68
Ø [.891-.893]
17.65-17.71
Ø
[.695-.698]
N0
Deutsch Male DTO4-2P integrated connector
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com C-13
R Series Large Toughcoils
Dimensions
Ø 46.28
Connector designed per [1.822]
Deutsch DT04-2P connector MAX THIS END 22.10
Interface DWG, rev. N/C [.870] REF
35.93
[1.414] REF
43.76
34.02
C
[1.723]
[1.339] NOM
33.61 [1.323] REF
REF
45.85-46.00
Ø
[1.805-1.811]
23.64-23.71
Ø
[.931-.934]
51.49-52.00
[2.027-2.047]
Label may be located on either side of coil
N0
Deutsch Male DTO4-2P integrated connector
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-14 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
Legacy R & L Series Coils
For SVx-12-3 and SVx-12-4 solenoid valves
12V 30W
24V 30W
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com C-15
C13 and C16 Series -
coil information
Duty rating
The coil is rated for continuous operation at nominal voltage +/-
10% and an ambient range of -20 to +40.
FPO Electrical
Connection Note: Coil performance, force produced and power consumed, is affected
by the heat of the coil, performance figures given in this catalogue
are measured under simulated continuous duty conditions at the coil
Bobbin stabilized temperature. It is important to verify the actual conditions the
valve will experience for any given application it should be tested in situ
Encapsulation to confirm valve selection.
-
AC Voltage Connector Circuit Diagram
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-16 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
C13 and C16 Series -
solenoid coil
1 2 3 4
38.1
(1.50) 50.0
(1.97)
23.9 (0.94)
22.0
(0.87)
36.0
(1.42)
35.5
(1.40)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com C-17
EPV Series proportional valve coils
EPV coils
12 DC 1.32 red 16 W
24 DC .66 black 16 W
*Nominal voltage @ 25°C (77°F).
F Q U* W Y
Coil part numbers Voltage Connector Connector Connector Connector Connector
Coil configurations “F”- Weather-Pack ”Q“ - Spade terminal ”U“– DIN 43650
male on leads
Caution
Coils may be hot to touch
if used in continuous duty
applications.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-18 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
EFV Series proportional valve coils EFV
M series coils
EHH-AMP-702
(Requires 24 VDC power supply to power plug and 12 VDC coil)
EHH-AMP-712
Power plug options (Requires 12 VDC power supply to power plug and 12 VDC coil)
EHH-PAM-600
DIN Rail Module (Requires 24 VDC power supply and 12VDC)
Specifications
Caution
Standard Voltage Resistance Power
C
Coils may be hot to touch
if used in continuous duty 12 VDC 4.7 Ω 30 W
applications. 24 VDC 19.0 Ω 30 W
1 2 3 4 5 6 7 8
53.3 54.6
(2.10) (2.15)
Ø 44,2
(1.74)
Ø 20,7 56,134
(0.815) (2.21)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com C-19
Electronic controls
Proportional valve
control power plugs
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-20 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
Model code/
operating data
Model code
1 Adjustment range 2 Cable gland
EHH - AMP - 702 - * - R - P - * - 30 D - Proportional plug: 1 - PG9
0-10 VDC with ramp 2 - M16
1 2 K - Proportional plug:
4-20 mA with ramp
Operating data C
Electrical
Types D Type K
Connections
1 24V DC
2 Supply GND
3 Positive command signal
4 Negative command signal
18-36V DC including ± 10% maximum ripple
(peak-to-peak)
Power (input) supply 24V DC nominal
Absolute maximum voltage 40V
Max. power consumption including solenoid 35W
Reverse polarity protected Yes
Short circuit protected Yes
Maximum output current 1,6A
Maximum output voltage typical
(1,6A output current) Typically 1,5V below supply voltage
Command signal 0-10V (10 kohms) 4-20 mA (250 ohms)
Deadband triggering 200 mV 4 mA
For output (LED on) 200 mV to 10V 4-20 mA
For no output (LED off) 0 mV to 100 mV 0-4 mA
Deadband adjustment range 100 to 1000 mA
Gain adjustment range 0.02A/V to 0.16A/V 0.01 A/mA to 0.08 A/mA
Dither adjustment range 0 to 500 mA
Ramp time (types D and K only) 50 ms to 5s
PWM frequency 1200 Hz ± 10%
Dither frequency 120 Hz ± 10%
IEC 529: IP67 (when correctly installed with
interface seal in place) Fully short-circuit and
Protection reverse-polarity protected
Isolation to VDE 0110 Group “B”
Electromagnetic compatibility (EMC):
Emission EN 50081-2
Immunity EN 50082-2
Mechanical
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com C-21
Installation data
Input/output
characteristics
Output Ramp
current setting
USX
Gain setting
Deadband
compensation
Time
Installation dimensions
mm (inch)
88 (3.52) 3rd angle
22 projection
(0.87)
39 Solenoid Connections
(1.54)
No connection
1 (or 2)
34
(1.34)
2
2 (or 1)
38
(1.5)
1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-22 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
Installation data
Warning
Electromagnetic Compatibility (EMC) - Screened
cables should be used and particular attention paid
to the grounding of the screens as shown in the
above diagrams.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com C-23
Installation data
Assembly showing
wiring connection points
Warning
Ensure cable clamp nut is
adequately tightened to secure
cable. Do not connect, or
disconnect, the plug while
power is on. Do not mount,
or dismount, the plug while
power is on.
C
*All seals must be fitted correctly at plug installation to provide protection to IP67 (IEC 529).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-24 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
Installation data
Start-Up procedure • Switch on the power supply. Spare parts Ordering procedure
• With the plug correctly Apply the command signal. The only spare part available Order plug by full model code,
wired but not mounted to (a) Observe Power On LED is the interface seal, part and spare interface seals by
the load provide with a DC (RED) is ON. number 732100. part number 732100.
power supply (See table). (b) Observe PWM LED
• Apply the command signal (Orange) is ON.
(ON) and check the Power If LED is not operated then
ON LED (RED) illuminates. there is short circuit in the
Reduce the signal to the load. Replace the load/
Command signal (OFF) level load coil.
and check the LED (RED) • Successful completion of
C
goes out. these steps means that the
• If there is malfunction to the plug and load are ready for
LED replace the plug. normal use.
• Switch off the power
supply and command
signal and connect the
plug to the load. Ensure
that the interface seal is
correctly fitted and clamped
between the mounting
faces (essential for IP65
protection). Tighten the
retaining screw.
• Ensure that no damage
or injury will occur on the
machine when the valve
is operated.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com C-25
Electronic controls
“Soft Switch” power plugs
For use with valve types: hydraulic solenoid operated offer adjustable, ramped on/off
directional and pressure switching times through the Features and benefits
EPV**-12D-1* control valves where control of use of an integral amplifier. • Integral amplifier provides
EFV1-**-012DE* valve response time can The switching time range control from on/off logic
significantly reduce shocks in is 50 ms to 5 seconds. command signal
ERV1/2**-12D-1* the hydraulic system.
The soft switch plug is rated • Adjustable ramp time
EPRV1/3**-12D-1* Best results in reducing for 24V DC nominal and • Deadband compensation
ESV1**-12D-1* hydraulic shocks will only be controlled by a 24V logic
C IRV**-012D-1*
obtained by using valves with signal. Applying an “on” signal
• Adjustable output level
the right “low shock”, or “ • Adjustable dither
causes the output current to
PFR21* proportional” features. • EMC to latest European
ramp up to, and stay at, an
PFR24* adjustable maximum while the standards
PDR21A* “on” signal is maintained. At • Improved switching time
“switch-off” the output repeatability
PPD22**-012D-1* current is ramped down to • Fully short-circuit and
zero and will remain at zero reverse-polarity protected
until the next “on” signal.
• Protection to IP67
Ramp times (switching times)
can be adjusted by an
in-built potentiometer.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-26 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
Model code/
operating data
Model code
EHH - AMP - 702 - C - *
Operating data C
Electrical
Connections
1 24V DC
2 OV (power and signal)
3 Positive command signal
4 Negative command signal
18 - 36V DC including ± 10% maximum ripple
ripple (peak-to-peak)
Power (input) supply 24V DC nominal
Absolute maximum voltage 40V
Max. power consumption including solenoid 35W
Reverse polarity protected Yes
Short circuit protected Yes
Maximum output current 1,6A
Maximum output voltage typical
(1,6A output current) Typically 1,5V below supply voltage
Command signal
For output (LED on) 11 to 24V
For no output (LED off) 0V to 5V
Input impedance 10 KOhm ohms
Deadband adjustment range <100 - 1000 mA
Gain adjustment range 0.02A to 1,6A (maximum)
Dither adjustment range 0 to 500 mA
Ramp time 50 ms to 5s
PWM frequency 1200 Hz ± 10%
Dither frequency 120 Hz ± 10%
IEC 529: IP67 (when correctly installed
with interface seal in place)
Protection Fully short-circuit and reverse-polarity protected
Isolation to VDE 0110 Group “B”
Electromagnetic compatibility (EMC):
Emission EN 50081-2
Immunity EN 50082-2
Mechanical
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com C-27
Installation data
Input/Output
characteristics
Functions Command
signal
Switch-on/off: after
switching on with a
11V signal the amplifier
will remain in the “on”
condition with a command
signal above 6V. The 24V,
command signal must typical
be reduced to below 5V
C to achieve switch-off of
Time
the amplifier.
Gain
adjustment
Deadband compensation
Time
Installation dimensions
mm (inch)
39 Solenoid Connections
(1.54)
No connection
1 (or 2)
34
(1.34)
2
2 (or 1)
38
(1.5)
1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-28 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
Installation data
Installation wiring
24V
4 3 2 1
0V
Warning >11 V
Electromagnetic Compatibility
(EMC) - Screened cables
should be used and particular Protective ground connection
attention paid to the grounding
of the screens as shown in the
above diagram.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com C-29
Installation data
Assembly showing
wiring connection
points
Warning
Ensure cable clamp nut is
adequately tightened to secure
cable. Do not connect, or
disconnect, the plug while
power is on. Do not mount,
C or dismount, the plug while
power is on.
*All seals must be fitted correctly at plug installation to provide protection to IP67 (IEC 529).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-30 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com
Installation data
Start-Up procedure • Switch off power supply Spare parts Ordering procedure
• Correctly wire the plug and, and command/input The only spare part available Order plug by full model code,
before mounting it on the signal and then install is the interface seal, part and spare interface seals by
valve solenoid, apply 24V plug on solenoid. Ensure number 732100. part number 732100.
DC (18 to 36V limits) to the that all seals are fitted
“power input” terminals. correctly and clamped
as the retaining screw
• Check for correct plug is tightened: this is
function by illumination/ essential in providing
non-illumination of the LED: IP67 protection.
a. Apply less than 2 to 3 • Ensure that the hydraulic C
volts to the input terminal:
LED should not be system will not cause
illuminated. any erratic movement of
actuators, then:
b. Increase voltage: the LED – Switch on power
should illuminate when supply again.
the voltage reaches 11V.
Do not exceed 30V – Repeat LED/function
command signal. check as in 2.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—January 2018 www.eaton.com C-31
Hydraulic Screw-in Cartridge Valves (SiCV)
Directional controls
Manual and pilot operated directional control
valves for applications up to 350 bar (5000 psi) and
265 L/min (70 USgpm)
Directional controls
VALVE LOCATOR ................................................... D-4 MSV15-12 - MANUAL PUSH VALVE .................. D-70
DIRECTIONAL CONTROLS ................................... D-5 MSV3-12 - MANUAL PUSH VALVE .................... D-72
ALTERNATIVE ADJUSTERS ................................. D-9 MSV13-12 - MANUAL PUSH VALVE ...................D-74
MRV3-10 - MANUAL ROTARY VALVE .................D-10 MSV4-12 - MANUAL PUSH VALVE .....................D-76
MRV13-10 - MANUAL ROTARY VALVE .............. D-12 MSV14-12 - MANUAL PUSH VALVE .................. D-78
MRV13-12 - MANUAL ROTARY VALVE.............. D-14 MSV6-12 - MANUAL PUSH VALVE .................... D-80
MRV3-16 - MANUAL ROTARY VALVE................ D-16 MSV16-12 - MANUAL PUSH VALVE .................. D-82
MRV13-16 - MANUAL ROTARY VALVE...............D-18 MSV17-10 - MANUAL PUSH VALVE .................. D-84
MRV4-10 - MANUAL ROTARY VALVE ................ D-20 MSV7-12 - MANUAL PUSH VALVE .................... D-86
MRV14-10 - MANUAL ROTARY VALVE .............. D-22 MSV17-12 - MANUAL PUSH VALVE .................. D-88
MRV14-12 - MANUAL ROTARY VALVE.............. D-24 PTS7-10 - PILOT TO SHIFT VALVE ...................... D-90
MRV4-16 - MANUAL ROTARY VALVE................ D-26 PTS17-10 - PILOT TO SHIFT VALVE .................... D-92
MRV14-16 - MANUAL ROTARY VALVE.............. D-28 PTS17-12 - PILOT TO SHIFT VALVE .................... D-94
MRV5-10 - MANUAL ROTARY VALVE ................ D-30 1SB10 - BRAKE SEQUENCE VALVE ................... D-96
MRV15-10 - MANUAL ROTARY VALVE .............. D-32 1SB304 - BRAKE RELEASE SHUTTLE VALVE ... D-98
MRV15-12 - MANUAL ROTARY VALVE.............. D-34 1RDS702 - PILOT TO SHIFT VALVE ...................D-100
MRV5-16 - MANUAL ROTARY VALVE................ D-36 PTS1-10 - PILOT TO SHIFT VALVE .....................D-102
MRV15-16 - MANUAL ROTARY VALVE.............. D-38 PTS11-12 - PILOT TO SHIFT VALVE ...................D-104
MRV6-10 - MANUAL ROTARY VALVE ................ D-40 PTS11-10 - PILOT TO SHIFT VALVE....................D-106
MRV6-16 - MANUAL ROTARY VALVE................ D-42 PTS1-16 - PILOT TO SHIFT VALVE .....................D-108
MRV7-10 - MANUAL ROTARY VALVE ................ D-44 PTS11-16 - PILOT TO SHIFT VALVE ................... D-110
MLV9-12-A - DIRECTIONAL VALVE .................... D-46 PTS11-20 - PILOT TO SHIFT VALVE ...................D-112
MLV9-12-B - DIRECTIONAL VALVE .................... D-47 PTS1-20 - PILOT TO SHIFT VALVE .....................D-113
MLV9-12-E - DIRECTIONAL VALVE .................... D-48 PTS12-10 - PILOT TO SHIFT VALVE ...................D-114
MLV9-12-F - DIRECTIONAL VALVE .................... D-49 PTS12-12 - PILOT TO SHIFT VALVE ...................D-116
MLV9-12 - DIRECTIONAL VALVE ........................ D-50 PTS2-16 - PILOT TO SHIFT VALVE .....................D-118
3CP2 - SERIES CHECK VALVE ............................ D-52 PTS12-16 - PILOT TO SHIFT VALVE .................. D-120
MPV1-10 - MANUAL PULL VALVE ..................... D-54 PTS2-20 - PILOT TO SHIFT VALVE .................... D-122
MPV3-10 - MANUAL PULL VALVE ..................... D-56 PTS13-10 - PILOT TO SHIFT VALVE .................. D-124
MSV1-12 - MANUAL PUSH VALVE .................... D-58 PTS13-12 - PILOT TO SHIFT VALVE .................. D-126
MSV11-10 - MANUAL PUSH VALVE .................. D-60 PTS3-16 - PILOT TO SHIFT VALVE .................... D-128
MSV11-12 - MANUAL PUSH VALVE .................. D-62 PTS13-16 - PILOT TO SHIFT VALVE .................. D-130
MSV2-12 - MANUAL PUSH VALVE .................... D-64 PTS3-20 - PILOT TO SHIFT VALVE .................... D-132
MSV12-12 - MANUAL PUSH VALVE .................. D-66 PTS14-12 - PILOT TO SHIFT VALVE .................. D-134
MSV5-12 - MANUAL PUSH VALVE .................... D-68 PTS14-16 - PILOT TO SHIFT VALVE .................. D-136
D-2 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS5-10 - PILOT TO SHIFT VALVE .................... D-138 PTS9-16 - PILOT TO SHIFT VALVE .................... D-156
PTS15-12 - PILOT TO SHIFT VALVE .................. D-140 PTS9-20 - PILOT TO SHIFT VALVE .................... D-158
PTS5-16 - PILOT TO SHIFT VALVE .................... D-142 DSV4-10 - SHUTTLE VALVE ............................ D-160
PTS15-16 - PILOT TO SHIFT VALVE .................. D-144 DSV4-12 - SHUTTLE VALVE ............................ D-162
PTS6-16 - PILOT TO SHIFT VALVE .................... D-146 DSV4-16 - SHUTTLE VALVE ............................. D-164
PTS16-16 - PILOT TO SHIFT VALVE .................. D-148 PTS6-10 - PILOT TO SHIFT VALVE .................... D-166
PTS9-8 - PILOT TO SHIFT VALVE ...................... D-150 PTS16-10 - PILOT TO SHIFT VALVE .................. D-168
PTS9-10 - PILOT TO SHIFT VALVE .................... D-152 PTS16-12 - PILOT TO SHIFT VALVE ...................D-170
PTS9-12 - PILOT TO SHIFT VALVE .................... D-154
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-3
Valve locator
Functional symbol
Flow Typical
Model Cavity rating pressure Page
3 2
Manual rotary valve L/min (USgpm) bar (psi)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-4 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Directional controls
Valve locator
Flow Typical
1 Model Cavity rating pressure Page
2
Manual pull valve, NC L/min (USgpm) bar (psi)
3 1 Flow Typical
Model Cavity rating pressure Page
2
Manual push valve L/min (USgpm) bar (psi)
3 1 Flow Typical
Model Cavity rating pressure Page
4 2 Manual push valve L/min (USgpm) bar (psi)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-5
Directional controls
Valve locator
Functional symbol
Flow Typical
Model Cavity rating pressure Page
3
Pilot to shift 2/2 valve L/min (USgpm) bar (psi)
1 2 4 Flow Typical
Model Cavity rating pressure Page
2
Brake sequence L/min (USgpm) bar (psi)
3 1
Flow Typical
Model Cavity rating pressure Page
2 Brake release shuttle L/min (USgpm) bar (psi)
3 1 4
Flow Typical
Model Cavity rating pressure Page
3 Pilot to shift valve L/min (USgpm) bar (psi)
Flow Typical
Model Cavity rating pressure Page
3 Pilot to shift valve L/min (USgpm) bar (psi)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Directional controls
Valve locator
Functional symbol
Flow Typical
Model Cavity rating pressure Page
3
Pilot to shift valve L/min (USgpm) bar (psi)
Flow Typical
3 Model Cavity rating pressure Page D
Pilot to shift valve L/min (USgpm) bar (psi)
Flow Typical
2 Model Cavity rating pressure Page
4 3 1
Flow Typical
3 Model Cavity rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-7
Directional controls
Valve locator
Functional symbol
Flow Typical
Model Cavity rating pressure Page
3
Sequence L/min (USgpm) bar (psi)
4 2
Flow Typical
4 2 Model Cavity rating pressure Page
5 3 1
Directional controls
Introduction
This section gives the Two pressure ratings are Features and benefits • All aluminum manifolds
basic specifications for the shown for all products • Products in this catalog are gold anodized to resist
complete line of Eaton's featured in this catalog – have been fatigue tested for corrosion.
Integrated Hydraulics threaded typical application pressure one million cycles at 132% • Desired settings may be
cartridge non-solenoid and fatigue pressure. The or 10 million cycles at 115% locked down.
directional control valves. typical application pressure of rated pressure. • Aluminum knob and cap
Its purpose is to provide a rating is the maximum • All operating parts are options are available on
quick, convenient reference recommended operating hardened steel, ground and some models.
tool when choosing Vickers pressure for the valve in a honed for long life and low
cartridge valves or designing given system. The fatigue
• Reliable, economical and
leakage. compact.
a system using these pressure rating is the pressure
• Designed for maximum
components. for the valve to be free for
infinite life from metal fatigue. flexibility and minimal space
requirements.
• All exposed cartridge
surfaces are zinc dichromate
plated to resist corrosion.
Warning
For pressure over 210 bar
(3000 psi) use steel housing.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Alternative adjusters
For light duty aluminum housings only
90º
50.8
(2.00)
50.8 22.23
(2.00) (0.875)
90º
45º
90º
Dowel Pin
88.95 #29 (0.136 +- 0.000
0.002 )
(3.502) 46.21
(1.819) .20 in Mating Housing
D2 and E2 Adjustment
65.9
(2.595) 50.64
50.69 (1.994)
(1.996)
D(2) Size 16
Size 16 Locating PIN installation
Ø 3,45 3,50
76,0 (#29 or 0.136)
(3.0) drill x 4,8
Locating pin (0.187) deep
in mating housing
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-9
MRV3-10 - Manual rotary valve
Manual semi-rotary directional control valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
MRV3-10(V)-D/E
2 position models Performance data
Ratings and specifications
3 2
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
D
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
1
Rated flow 23 L/min (6 US gpm)
Sectional view Temperature range -40°C to 120°C (-40° to 248°F)
Manual operators D - Lever (3-position detent)*
D2 - Lever (2-position detent)*
E - Ball (3-position detent)*
E2 - Ball (2-position detent)*
K - Knob (2-position, no detent)
Cavity C-10-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing material Aluminum or Steel
Weight cartridge only 0,22 kg (0.4 lbs)
Seal kit 565804 (Buna-N), 889599 (Viton®)
2
Flow - L/min (21,8 cSt oil @ 49°C)
0 10 20
80 6
1
Pressure Drop - bar
Pressure Drop - psi
Description 60
This is a 3 way 2 or 3 position 4
manual semi-rotary directional
control valve. Can be used as 40
a diverter or a dump valve.
2
20
0 0
0 2 4 6
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-10 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV3-10 - Manual rotary valve
Manual semi-rotary directional control valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
42,0
(1.65)
1/4-20 UNC-2A
90˚
24,6 25,4
(.97) (1.00)
3
2X7,14
18,8 57.2 2 (0.281) 75,4
(.74) (2.25) (2.97)
34,8
1 (1.37)
9,5 (0.37) 50 9.5 57.15
(1.97) (0.38) (2.250)
75.4
37,0 (2.97)
(1.45)
0.875" -14 T
46,0 3
(1.81)
1
Ø 15,80 (0.622)
Ø 17,40 (0.685)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-11
MRV13-10 - Manual rotary valve
Manual semi-rotary directional control valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
MRV13-10(V)-D2/2E
2 position models Performance data
3 Ratings and specifications
2
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
D 1 Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 250 cc/min (15in3/min) @ 350 bar (5000 psi)
Sectional view Temperature range -40° to 120°C (-40° to 248°F)
Manual operators D- Lever (3-position detent)*
D2 - Lever (2-position detent)*
E - Ball (3-position detent)*
E2- Ball (2-position detent)*
K- Knob (2-position, no detent
Cavity C-l0-3
Fluids All general purpose hydraulic fluids such as
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
Weight cartridge only 0,22 kg (0.48 Ibs)
Seal kit 565804 (Buna-N), 889599 (Viton®)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
60
4
1
40
“K” TYPE OPTION
20 2
Description
This is a high pressure 3 way
2 or 3 position manual semi-
rotary directional control valve. 0 0
Can be used as a diverter or a 0 2 4 6
dump valve.
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-12 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV13-10 - Manual rotary valve
Manual semi-rotary directional control valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
90˚
41.3 51.3
35.1 (2.02)
(1.63)
(1.38)
3
2 63.5
(2.50) 76.2 19.1
2X Ø7.14 (3.00) (0.75)
9,5 (0.37) Hex
(0.28) 1
51.3 9.7
22.4 57.02 22.4
(2.02) (0.88) (0.38) (2.245) (0.88)
76.2
(3.00)
25.4 (1.0) Hex
46,0 3 Warning
(1.81)
Aluminum housings can be
2 used for pressures up to 210
bar (3000 psi). Steel housings
1
must be used for operating
15.78-15.82
17.38-17.42 (0.621-0.623) pressures above 210 bar
(0.684-0.686) (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-13
MRV13-12 - Manual rotary valve
Manual semi-rotary directional control valve
46 L/min (12 USgpm) • 350 bar (5000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
3 2
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
D Rated flow 46 L/min (12 USgpm)
1
Internal leakage 250 cc/min (15in3/min) @ 350 bar (5000 psi)
Sectional view Temperature range -40°to 120°C(-40° to 248°F)
Manual operators D- Lever (3-position detent)*
D2 - Lever (2-position detent)*
E - Ball (3-position detent)*
E2- Ball (2-position detent)*
K- Knob (2-position, no detent)
Cavity C-l2-3
Fluids All general purpose hydraulic fluids such as:
MIL-H -5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
Weight cartridge only 0.32 kg (0.70 lbs)
Seal kit 02-180095 (Buna-N), 02-165887 (Viton®)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
A - Port 1-3
Pressure drop curves
B - Port 1-2
Cartridge only
2
60
B 4
40
20
0 0
0 2 4 6 8 10 12
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-14 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV13-12 - Manual rotary valve
Manual semi-rotary directional control valve
46 L/min (12 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
50
41.28 (1.97)
(1.625)
90˚
2 51.6
88.9 (2.03)
28.7 3 (3.50)
(1.13) 101.6
2 X Ø10.31 (4.00)
(0.406) 1
67.82 3
(2.670) Warning
2 Aluminum housings can be
used for pressures up to 210
bar (3000 psi). Steel housings
must be used for operating
1 22.15 - 22.19
(0.872 - 0.874)
pressures above 210 bar
23.73 - 23.77 (3000 psi).
(0.934 - 0.936)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-15
MRV3-16 - Manual rotary valve
Manual semi-rotary directional control valve
64 L/min (17 USgpm) • 210 bar (3000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
D Typical application pressure (all ports) 210 bar (3000 psi)
1
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Sectional view Rated flow 64 L/min (17 US gpm)
Temperature range -40°C to 120°C (-40° to 248°F)
Manual operators D - Lever (3-position detent)*
D2 - Lever (2-position detent)*
K - Knob (2-position, no detent)
Cavity C-16-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing material Aluminum or Steel
Weight cartridge only 0,53 kg (1.16 lbs)
Seal kit 889632 (Buna-N), 889636 (Viton®)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
3
0 0
0 2 4 6 8 10 12 14 16
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-16 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV3-16 - Manual rotary valve
Manual semi-rotary directional control valve
64 L/min (17 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
61,0 (2.40)
1/4-20 UNC -2A
90˚
28.4
3 (1.12)
57.0 88.9
(2.24) (3.50) 2 2X8.7
114.3 (0.34)
(4.50)
11,1 (0.43) 1
31.8 10.3 93.6 31.8
53,0
(2.08) (1.25) (0.41) (3.688) (1.25)
114.3
(4.50)
38,1 (1.0.50) Hex
1.3125"-12 Thd.
73,0 3
(2.87)
2
1
Ø 26,95 (1.061)
Ø 28,55 (1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-17
MRV13-16 - Manual rotary valve
Manual semi-rotary directional control valve
64 L/min (17 USgpm) • 350 bar (5000 psi)
3
Pressure drop curves
Cartridge only
2
Flow - L/min (21,8 cSt oil @ 49°C)
0 10 20 30 40 50 60
80 6
Pressure Drop - psi
1
Pressure Drop - bar
60
4
40
Description
2
This is a high pressure 3 way 20
2 or 3 position manual semi-
rotary directional control valve.
Can be used as a diverter or a 0 0
dump valve. 0 2 4 6 8 10 12 14 16
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-18 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV13-16 - Manual rotary valve
Manual semi-rotary directional control valve
64 L/min (17 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
56.3
(2.22)
60.33
(2.375)
3
90˚ 54.0
(2.13) 88.9 25.4
2 (3.50) (1.00)
108.0
2 X Ø 10.31 (4.25)
(0.406) 1
9.5 (0.375) Hex
1 5/16 - 12
Warning
3 Aluminum housings can
74
(2.91)
be used for pressures up
to 210 bar (3000 psi). Steel
2 housings must be used for
operating pressures above
210 bar (3000 psi).
1 26.90 - 26.94
(1.059 - 1.061)
28.50 - 28.54
(1.122 - 1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-19
MRV4-10 - Manual rotary valve
Manual semi-rotary directional control valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
D Rated flow 11 L/min (3 US gpm)
Temperature range -40°C to 120°C (-40° to 248°F)
Manual operators D - Lever (3-position detent)*
D2 - Lever (2-position detent)*
E - Ball (3-position detent)*
E2 - Ball (2-position detent)*
K - Knob (2-position, no detent)
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
4
Filtration Cleanliness code 18/16/13
Standard housing material Aluminum or Steel
3 Weight cartridge only 0,17 kg (0.38 lbs)
Seal kit 565805 (Buna-N), 889600 (Viton®)
* Light duty housing only.
2 Viton is a registered trademark of E.I. DuPont
8
Pressure Drop - psi
100
6
B
4
50
2
0 0
0 1 2 3
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to port 4 or 3 to 2
B - Port 4 to port 1 or 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-20 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV4-10 - Manual rotary valve
Manual semi-rotary directional control valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
2 Size 0 Cartridge
10 - 10 size A3B 3/8” BSPP 02-179705
A6T SAE 6 566161 SS - 316 stainless steel
A2G 1/4” BSPP 876709 external components
D
3 Seal material (only available for ”0”
A3G 3/8” BSPP 876715
Blank - Buna-N and ”F” options).
A6H SAE 6 876708
V - Viton
A8H SAE 8 876713
S2G 1/4” BSPP 02-175139
4 Manual operator S3G 3/8” BSPP 02-175140
O - No operator S6T SAE 6 02-175137
D - Lever (3-position detent) S8T SAE 8 02-175138
D2 - Lever (2-position detent)
E - Ball (3-position detent) See section J for housing details.
E2 - Ball (2-position detent)
K - Knob (2-position, no detent)
90˚ 28.8
(1.13)
36.7 4
(1.44) 76.2 3 52.6
(3.00) (2.07)
9,5 (0.38) 88.9 2 7.14
(3.50) (0.281)
37,0
(1.46) 1
25.4 9.5 57.15 25.4
25,4 (1.0) Hex
(1.00) (0.38) (2.250) 2-Slots (1.00)
76.2
0.875"-14 Thd. (3.00)
4
61,9
(2.44) 3
1
Ø 15,80 (0.622)
Ø 17,40 (0.685)
Ø 18,97 (0.747) Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-21
MRV14-10 - Manual rotary valve
Manual semi-rotary directional control valve
11 L/min (3 USgpm) • 350 bar (5000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
D Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 11 L/min (3 USgpm)
Internal leakage 300 cc/min (18in3/min) @ 350 bar (5000 psi)
Temperature range -40°to 120°C(-40° to 248°F)
Manual operators D- Lever (3-position detent)*
D2 - Lever (2-position detent)*
E - Ball (3-position detent)*
E2 - Ball (2-position detent)*
K - Knob (2-position, no detent)
Cavity C-l0-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
4
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
3 Weight cartridge only 0.17 kg (0.38 lbs))
Seal kit 565805 (Buna-N), 889600 (Viton®)
2 * Light duty housing only.
Viton is a registered trademark of E.I. DuPont
8
Pressure Drop - psi
100
6
B
4
50
2
0 0
0 1 2 3
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to port 4 or 3 to 2
B - Port 4 to port 1 or 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-22 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV14-10 - Manual rotary valve
Manual semi-rotary directional control valve
11 L/min (3 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
41.28
(1.625)
51.21
(2.016) 19
90˚ (0.75)
4
3 50.8
76.2 (2.00)
9.5 (0.375) Hex 88.9 (3.00) 2
34.9 (3.50)
(1.37) 2 X Ø7.11
51.26 1 (0.280)
(2.018) 22.2
(0.87) 9.5 57.15 22.2
(2.250) (0.87)
25.4 (1.0) Hex 44.45 (0.37) 76.2
(1.750) (3.00)
4
62.1
(2.445) 3
2 Warning
Aluminum housings can be
1 15.78-15.82 used for pressures up to 210 bar
(0.621-0.623) (3000 psi). Steel housings must
17.38 - 17.42
(0.684 - 0.686) 18.95 - 18.99 be used for operating pressures
(0.746 - 0.748)
above 210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-23
MRV14-12 - Manual rotary valve
Manual semi-rotary directional control valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
160
10
140
Pressure Drop-bar
Pressure Drop-psi
A
120
100
80
5
60
B
40
20
0
0 1 2 3 4 5 6
A - Port 3 to port 4 or 3 to 2
B - Port 4 to port 1 or 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-24 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV14-12 - Manual rotary valve
Manual semi-rotary directional control valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
90˚
49.61
(1.953)
41.28 28.7
(1.625) (1.31)
4
74.4 101.6 3
(2.931) (4.00)
9.5 (0.375) Hex 2 51.6
127.0 (2.031)
49.61 (5.00)
(1.953)
1
31.8 31.8
31.75 (1.25) Hex 78.6 (1.25)
(1.25) 10.3
(0.406) (3.094) 63.5
88.9 (2.50)
1 1/16-12 UNF - 2A Thd. (3.50)
4
90.91
(3.579) 3 Warning
Aluminum housings can
2 be used for pressures up to
210 bar (3000 psi). Steel
housings must be used for
1 operating pressures above
20.55 - 20.59
(0.809 - 0.811) 210 bar (3000 psi).
22.13 - 22.17
(0.871 - 0.873) 23.73 - 23.77
(0.934 - 0.936)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-25
MRV4-16 - Manual rotary valve
Manual semi-rotary directional control valve
45 L/min (12 USgpm) • 210 bar (3000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
1
Description Pressure drop curves
This is a 4 way 2 or 3 position Cartridge only
manual semi-rotary directional
control valve. In the center
condition all ports are closed.
Flow - L/min (21,8 cSt oil @ 49°C)
0 5 10 15 20 30 40 50
150 10
Pressure Drop - bar
Pressure Drop - psi
8
100
A 6
50 4
B 2
0 0
0 1 2 3 4 5 10
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to port 4 or 3 to 2
B - Port 4 to port 1 or 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-26 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV4-16 - Manual rotary valve
Manual semi-rotary directional control valve
45 L/min (12 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
16 - 16 size 0 Cartridge
A12T SAE 12 566411 – – D
A6B 3/4” BSPP 02-175468 – –
3 Seal material
A10H SAE 10 – 876729 –
Blank - Buna-N
V - Viton A12H SAE 12 – 876731 –
A4G 1/2” BSPP – 876728 –
A6G 3/4” BSPP – 876730 –
4 Manual operator S4G 1/2” BSPP – – 02-175143
O - No operator S6G 3/4” BSPP – – 02-175144
D - Level (3-position detent) S10T SAE 10 – – 02-175141
D2 - Level (2-position detent)
K - Knob (2-position, no detent) S12T SAE 12 – – 02-175142
See section J for housing details.
Cartridge only
Installation drawing (aluminum)
28.4
(1.12)
61,0 4
90˚ 57
(2.4) 114.3
85.6 3 (2.24)
(4.50)
(3.37)
139.7 2 2 Slots
(5.50) 8.74
(0.344)
1
11,1 (0.438)
31.8
(1.25) 10.3 93.68 31.8
53,0 (0.41) (3.688) (1.25)
(2.09) 63.5 114.3
(2.500)
(4.50)
38,1 (1.5) Hex
1.312"-12 Thd.
4
101,6
(4.0)
3
1
Ø 25,37 (0.999)
Ø 26,95 (1.061)
Ø 28,55 (1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-27
MRV14-16 - Manual rotary valve
Manual semi-rotary directional control valve
45 L/min (12 USgpm) • 350 bar (5000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Description
8
This is a high pressure 4 way
100
2 or 3 position manual semi- A 6
rotary directional control valve.
In the center condition all
ports are closed. 50 4
B 2
0 0
0 1 2 3 4 5 10
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to port 4 or 3 to 2
B - Port 4 to port 1 or 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-28 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV14-16 - Manual rotary valve
Manual semi-rotary directional control valve
45 L/min (12 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
90˚
54.0 56.3 25.4
60.33 (2.21)
(2.375)
(2.12) (1.00)
4
120.7 82.5
(4.75) 3 (3.25)
9.5 (0.375) Hex 139.7 2
(5.50) 2 X Ø 10.31
56.3 1 (0.406)
(2.21)
25.4
(1.00) 12.7 76.2 25.4
38.1 (1.5) Hex (0.50) (3.000) (1.00)
50.8 101.6
(2.00) (4.00)
1 5/16-12 UNF-2A Thd.
101.7
(4.00) 3
2
Warning
Aluminum housings can
be used for pressures up
1 25.33 - 25.37 to 210 bar (3000 psi). Steel
(0.997-0.999)
26.90 - 26.94 housings must be used for
(1.059 - 1.061) 28.50 - 28.54 operating pressures above
(1.122 - 1.124)
210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-29
MRV5-10 - Manual rotary valve
Manual semi-rotary directional control valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
D Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 11 L/min (3 USgpm)
Temperature range -40°C to 120°C (-40° to 248°F)
Manual operators D - Lever (3-position detent)
E - Ball (3-position detent)
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Description
This is a 4 way 2 or 3 position
Flow - L/min (21,8 cSt oil @ 49°C)
manual semi-rotary directional
control valve. In the center 0 2 4 6 8 10
condition all ports closed. 12
150
A 10
Pressure Drop - bar
Pressure Drop - psi
8
100
6
B
50 4
C
2
0 0
0 0.5 1 1.5 2 2.5 3
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to 4 or 3 to 2
B - Port 4 to 1
C - Port 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-30 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV5-10 - Manual rotary valve
Manual semi-rotary directional control valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
10 - 10 size 0 Cartridge
A3B 3/8” BSPP 02-179705 – – D
A6T SAE 6 566161 – –
3 Seal material
A2G 1/4” BSPP – 876709 –
Blank - Buna-N
V - Viton A3G 3/8” BSPP – 876715 –
A6H SAE 6 – 876708 –
A8H SAE 8 – 876713 –
4 Manual operator S2G 1/4” BSPP – – 02-175139
O - No operator S3G 3/8” BSPP – – 02-175140
D - Level (3-position detent) S6T SAE 6 – – 02-175137
D2 - Level (2-position detent)
E - Ball (3-position detent) S8T SAE 8 – – 02-175138
E2 - Ball (2-position detent) See section J for housing details.
K - Knob (2-position, no detent)
Locating pin
25,4 (1.0) Hex
0.875"-14 Thd.
4
61,9
(2.43) 3
1
Ø 15,75 (0.620)
Ø 17,40 (0.685)
Ø 18,97 (0.747)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-31
MRV15-10 - Manual rotary valve
Manual semi-rotary directional control valve
11 L/min (3 USgpm) • 350 bar (5000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
1
Pressure drop curves
Description Cartridge only
This is a high pressure 4 way
2 or 3 position manual semi- Flow - L/min (21,8 cSt oil @ 49°C)
rotary directional control valve. 0 2 4 6 8 10
In the center condition all 12
ports are closed.
150
A 10
Pressure Drop - bar
Pressure Drop - psi
8
100
6
B
50 4
C
2
0 0
0 0.5 1 1.5 2 2.5 3
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to 4 or 3 to 2
B - Port 4 to 1
C - Port 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-32 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV15-10 - Manual rotary valve
Manual semi-rotary directional control valve
11 L/min (3 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
41.28
(1.625)
51.21
90˚ (2.016) 19
(0.75)
4
3 50.8
9,5 (0.375) Hex 76.2 (2.00)
88.9 (3.00) 2
34.9 (3.50)
(1.37) 2 X Ø7.11
51.26 (0.280)
1
(2.018)
22.2
(0.87) 9.5 57.15 22.2
(2.250) (0.87)
44.45 (0.37) 76.2
25.4 (1.0) Hex (3.00)
(1.750)
62.1
(2.445) 3 Warning
Aluminum housings can
2 be used for pressures up to
210 bar (3000 psi). Steel
1 15.78-15.82 housings must be used for
(0.621-0.623) operating pressures above
17.38-17.42
(0.684-0.686) 18.95 - 18.99 210 bar (3000 psi).
(0.746 - 0.748)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-33
MRV15-12 - Manual rotary valve
Manual semi-rotary directional control valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
D Rated flow 23 L/min (6 USgpm)
Internal leakage 300 cc/min (18in3/min) @ 350 bar (5000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Manual operators D- Lever (3-position detent)
E - Ball (3-position detent)
Cavity C-l2-4
1 200
5 10 15 20
Description
180
This is a 4 way 2 or 3 position
manual semi-rotary directional 160
control valve. In the center 10
condition all ports are closed. 140
Pressure Drop-bar
Pressure Drop-psi
A
120
100
80
5
60
B
40
20
0
0 1 2 3 4 5 6
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-34 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV15-12 - Manual rotary valve
Manual semi-rotary directional control valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
49.61
90˚ 28.7
(1.953)
(1.31)
41.28
(1.625) 4
74.4 101.6 3
(2.931) (4.00)
2 51.6
127.0 (2.031)
9.5 (5.00)
(.375) 1
Hex 31.8
31.8
49.61 (1.25) 10.3 78.6 (1.25)
31.75 (0.406) (3.094) 63.5
(1.953)
(1.25) 88.9 (2.50)
Hex (3.50)
1 1/16-12
UNF-2A Thd.
“4”
90.91
(3.579) “3”
“2”
Warning
“1” 20.55-20.59 Aluminum housings can
(.809-.811)
22.13-22.17 be used for pressures up to
(.871-.873) 23.73-23.77
(.934-.936)
210 bar (3000 psi). Steel
housings must be used for
operating pressures above
210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-35
MRV5-16 - Manual rotary valve
Manual semi-rotary directional control valve
45 L/min (12 USgpm) • 210 bar (3000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
D Rated flow 45 L/min (12 USgpm)
Internal leakage
Temperature range -40°C to 120°C (-40° to 248°F)
Manual operators D - Lever (3-position detent)*
Cavity C-16-4
150 10
Pressure Drop - bar
Pressure Drop - psi
8
100
6
A
4
50
B 2
0 0
0 2.5 5 7.5 10 12
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to 4 or 3 to 2
B - Port 4 to 1 or 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-36 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV5-16 - Manual rotary valve
Manual semi-rotary directional control valve
45 L/min (12 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
Aluminum
2 Size Fatigue rated Aluminum light duty
16 - 16 size 0 Cartridge
A12T SAE 12 566411 –
D
A6B 3/4” BSPP 02-175468 –
3 Seal material
A10H
Blank - Buna-N SAE 10 –
876729
V - Viton
A12H SAE 12 –
876731
4 Manual operator A4G 1/2” BSPP – 876728
O - No operator A6G 3/4” BSPP – 876730
D - Level (3-position detent)
See section J for housing details.
11,1 (0.4 3)
28.4 46.0
(1.12) 1/4-20 UNC-2A
(1.81)
4 57
114.3 3 (2.24)
85.6 (4.50)
77,0 (3.37)
139.7 2 2 Slots
(3.03)
(5.50) 8.74
(0.344)
1
Locating Pin 31.8 10.3 93.68
(1.25) 31.8
38,1 (1.5) Hex (0.41) (3.688) (1.25)
63.5 114.3
1.312” 1 12 Thd. (2.500)
(4.50)
4
101,6
(4.0)
3
1
Ø 25,37 (0.999)
Ø 26,95 (1.061)
Ø 28,55 (1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-37
MRV15-16 - Manual rotary valve
Manual semi-rotary directional control valve
45 L/min (12 USgpm) • 350 bar (5000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
D Rated flow 45 L/min (12 USgpm)
Internal leakage 300 cc/min (18in3/min) @ 350 bar (5000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Manual operators D- Lever (3-position detent)*
* Light duty housing only.
Cavity C-16-4
4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
3 Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum and Steel
Weight cartridge only 0.65 kg (1.43 lbs))
2 Seal kit 889634 (Buna-N), 889638 (Viton®)
Viton is a registered trademark of E.I. DuPont
150 10
Pressure Drop - bar
Pressure Drop - psi
8
100
6
A
4
50
B 2
0 0
0 2.5 5 7.5 10 12
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to 4 or 3 to 2
B - Port 4 to 1 or 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-38 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV15-16 - Manual rotary valve
Manual semi-rotary directional control valve
45 L/min (12 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
Port 3 to 2
and 4 to 1
54.0 56.3 25.4
(2.12) (2.21) (1.00)
45˚
Mid 4
position 120.7 82.5
45˚ (4.75) 3 (3.25)
139.7 2
Port 3 to 4 (5.50)
and 2 to 1 2 X Ø 10.31
104.1 1 (0.406)
(4.10) 25.4
(1.00) 12.7 76.2 25.4
(0.50) (3.000) (1.00)
50.8 101.6
(2.00) (4.00)
76.7
(3.02)
101.7 3
(4.00) Warning
2 Aluminum housings can
be used for pressures up to
210 bar (3000 psi). Steel
1 25.33 - 25.37
(0.997 - 0.999) housings must be used for
26.90 - 26.94
(1.059 - 1.061) 28.50 - 28.54 operating pressures above
(1.122 - 1.124) 210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-39
MRV6-10 - Manual rotary valve
Manual semi-rotary directional control valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
D Rated flow 11 L/min (3 USgpm)
Internal leakage 164cc/min (10in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Manual operators D - Lever (3-position detent)*
E - Ball (3-position detent)*
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum and Steel
Weight cartridge only 0,27 kg (0.59 lbs)
4
Seal kit 889625 (Buna-N), 566080 (Viton®)
* Light duty housing only.
3 Viton is a registered trademark of E.I. DuPont
1
Description Pressure drop curves
This is a 4 way 2 or 3 position Cartridge only
manual semi-rotary directional
control valve. In the center
condition all port 2 is closed. Flow - L/min (21,8 cSt oil @ 49°C)
All other ports are open.
0 2 4 6 8 10
12
150
A 10
Pressure Drop - bar
Pressure Drop - psi
8
100
6
B
4
50
C 2
0 0
0 0.5 1 2.5 2 2.5 3
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to 4 or 3 to 2
B - Port 4 to 1
C - Port 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-40 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV6-10 - Manual rotary valve
Manual semi-rotary directional control valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
2 0 Cartridge
Size
A3B 3/8” BSPP 02-179705 – –
10 - 10 size
A6T SAE 6 566161 – –
A2G 1/4” BSPP – 876709 – D
3 Seal material A3G 3/8” BSPP – 876715 –
Blank - Buna-N A6H SAE 6 – 876708 –
V - Viton® A8H SAE 8 – 876713 –
S2G 1/4” BSPP – – 02-175139
4 Manual operator S3G 3/8” BSPP – – 02-175140
O - No operator S6T SAE 6 – – 02-175137
D - Level (3-position detent) S8T SAE 8 – – 02-175138
E - Ball (3-position detent) See section J for housing details.
Port 3 to 4
and 2 to 1 28.8
45˚ (1.14)
Mid position
7.9 20.8
41,0
(0.31) (0.82)
(1.61)
45˚ 36.7 4
(1.44) 76.2 3 52.6
Port 3 to 2 (3.00) (2.07)
and 4 to 1 83,0 88.9 2 7.14
(3.27) (3.50) (0.281)
9,5 (0.37)
1
58,0 25.4 9.5 57.15 25.4
(2.28) (1.00) (0.38) (2.250) 2-Slots (1.00)
76.2
(3.00)
Locating pin
25,4 (1.0) Hex
0.875"-14 Thd.
4
61,9 3
(2.43)
1
Ø 15,82 (0.623)
Ø 17,42 (0.686)
Ø 19,00 (0.748)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-41
MRV6-16 - Manual rotary valve
Manual semi-rotary directional control valve
11 L/min (3 USgpm) • 350 bar (3000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
D Rated flow 11 L/min (3 USgpm)
Temperature range -40°C to 120°C (-40° to 248°F)
Manual operators D - Lever (3-position detent)
E - Ball (3-position detent)
Cavity C-16-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
4 Standard housing material Aluminum and Steel
Weight cartridge only 0,27 kg (0.59 lbs)
3 Seal kit 889625 (Buna-N), 566080 (Viton®)
Viton is a registered trademark of E.I. DuPont
150
100
P-1
C1-T
C2-T
50
0
0 5 10 15 20 25
Flow-USgpm (135 SUS oil @ 120'F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-42 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV6-16 - Manual rotary valve
Manual semi-rotary directional control valve
11 L/min (3 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
Dimensions
mm (inch)
P to C
C2 to T
4.125
45˚ (104.8)
Mid position 2.25
(572.0)
1.875
(47.6)
0.938 3.0
(23.8) (76.2)
45˚ P to C2
C1 to T
P to C2
C1 to T
C1
4.375
3.0 P (111.1)
(76.2)
5.0
C2 (127.0)
C1 3.688 0.156
(93.7) 4.0 (4.0)
4.0 (101.6)
(101.6) P
C2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-43
MRV7-10 - Manual rotary valve
Manual semi-rotary directional control valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
D Rated flow 11 L/min (3 USgpm)
Internal leakage 164cc/min (10in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Manual operators D - Lever (3-position detent)*
E - Ball (3-position detent)*
Cavity C-10-4
4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
3 Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum and Steel
2 Weight cartridge only 0,27 kg (0.59 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton®)
* Light duty housing only.
1 Viton is a registered trademark of E.I. DuPont
8
100
6
B
4
50
C 2
0 0
0 0.5 1 2.5 2 2.5 3
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to 4 or 3 to 2
B - Port 4 to 1
C - Port 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-44 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MRV7-10 - Manual rotary valve
Manual semi-rotary directional control valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
28.8
(1.14)
Port 3 to 4
and 2 to 1 7.9 20.8
(0.31) (0.82)
45˚
Mid position
41,0 36.7 4
(1.61) (1.44) 76.2 3 52.6
(3.00) (2.07)
45˚ 88.9 2 7.14
(3.50) (0.281)
Port 3 to 2
and 4 to 1 83,0
(3.27) 1
9,5 (0.37)
25.4 9.5 57.15 25.4
(1.00) (0.38) (2.250) 2-Slots (1.00)
76.2
58,0 (3.00)
(2.28)
Locating pin
25,4 (1.0) Hex
0.875"-14 Thd.
4
61,9 3
(2.43)
1
Ø 15,82 (0.623)
Ø 17,42 (0.686)
Ø 19,00 (0.748)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-45
MLV9-12-A - Directional valve
Manual lever valve, spool
60 L/min (15.9 USgpm) • 210 bar (3000 psi)
Operation Features
In the center position, this In position 1, flow is directed Hardened, ground and honed
2 4
valve allows flow from port from port 3 to port 2 and from working parts to limit leakage
3 to port 1 and blocks ports 2 port 4 to port 1. In position 2, and prolong life. Compact
and 4. flow is directed from port 3 to design with a low Pressure
3 1 port 4 and from port 2 to port 1. drop. Handle position fully
adjustable.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
D Fatigue pressure (210 bar) 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure (626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
Max flow 60 L/min (15.9 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
Weight .57 kg (1.25 lbs)
4 Seal kit 9900171-000 (Buna-N), 9900172 (Viton®)
Internal leakage 246 cm /min (15 in3/min) max. @ 210 bar (3000 psi)
3
2 Pressure drop
Flow - L/min
1 19 38 60
400 28
300 21
Pressure Drop - psi
Description A
This is a lever operated 4 way 200 14
3 position direct acting spool B
type directional valve. Spring
centered with port 3 open to 100 7
port 1 (Tank). Ports 2 and 4
blocked. This valve can easily
be installed into a manifold 0
simplifying the design and 0 5 10 15
removing leak points. A - 3-2 Flow - USgpm
B - 4-1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-46 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MLV9-12-B - Directional valve
Manual lever valve, spool
60 L/min (15.9 USgpm) • 210 bar (3000 psi)
Operation Features
In the center position, all ports In position 2, flow is directed Hardened, ground and honed
2 4 are open to each other. In from port 3 to port 2 and from working parts to limit leakage
position 1, flow is directed port 4 to port 1. and prolong life. Compact
from port 3 to port 4 and from design with a low Pressure
port 2 to port 1. drop. Handle position fully
3 1
adjustable.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Fatigue pressure (210 bar) 3,000 psi per NFPA/T2-6-1 R2-2000
D
Rated burst pressure (626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
Max flow 60 L/min (15.9 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
4 Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
Weight .57 kg (1.25 lbs)
Seal kit 9900171-000 (Buna-N), 9900172 (Viton®)
3 Internal leakage 246 cm /min (15 in3/min) max. @ 210 bar (3000 psi)
3
Flow - L/min
19 38 60
Description 400 28
This is a lever operated 4
way 3 position direct acting 300 21
Pressure Drop - psi
0
0 5 10 15
A - 3-2 Flow - USgpm
B - 4-1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-47
MLV9-12-E - Directional valve
Manual lever valve, spool
60 L/min (15.9 USgpm) • 210 bar (3000 psi)
Operation Features
2 4 In the center position, all ports In position 2, flow is directed Hardened, ground and honed
are blocked. In position 1, flow from port 3 to port 2 and from working parts to limit leakage
is directed from port 3 to port port 4 to port 1. and prolong life. Compact
4 and from port 2 to port 1. design with a low Pressure
3 1 drop. Handle position fully
adjustable.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
D Fatigue pressure (210 bar) 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure (626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
Max flow 60 L/min (15.9 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
Weight .57 kg (1.25 lbs)
Seal kit 9900171-000 (Buna-N), 9900172 (Viton®)
Internal Leakage 246 cm /min (15 in3/min) max. @ 210 bar (3000psi)
3
2 Pressure drop
Flow - L/min
19 38 60
1 400 28
Description 300 21
Pressure Drop - psi
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-48 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MLV9-12-F - Directional valve
Manual lever valve, spool
60 L/min (15.9 USgpm) • 210 bar (3000 psi)
Operation Features
In the center position, port 1, In position 2, flow is directed Hardened, ground and honed
2 4 port 2, and port 4 are open to from port 3 to port 2 and from working parts to limit leakage
each other while port 3 is port 4 to port 1. and prolong life. Compact
blocked. In position 1, flow is design with a low Pressure
3 1 directed from port 3 to port 4 drop. Handle position fully
and from port 2 to port 1. adjustable.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Fatigue pressure (210 bar) 3,000 psi per NFPA/T2-6-1 R2-2000
D
Rated burst pressure (626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
Max flow 60 L/min (15.9 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
Weight .57 kg (1.25 lbs)
Seal kit 9900171-000 (Buna-N), 9900172 (Viton®)
4 Internal Leakage 246 cm3/min (15 in3/min) max. @ 210 bar (3000psi)
Endurance tested to 1 million cycles at full rated flow and pressure
Viton is a registered trademark of E.I. DuPont
2 Pressure drop
Flow - L/min
19 38 60
1 400 28
300 21
Pressure Drop - psi
Description
This is a lever operated 4 way 200 A 14
3 position direct acting spool
type directional valve. Spring B
centered with ports 2 and 4 to 100 7
tank and port 2 blocked. This
valve can easily be installed
into a manifold simplifying 0
the design and removing leak 0 5 10 15
points. A - 3-2 Flow - USgpm
B - 4-1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-49
MLV9-12 - Directional valve
Manual lever valve, spool
60 L/min (15.9 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9
D 3 Seal material 3 1
3 See page D-297 for lever
1
Blank - Buna-N position
V - Viton®
E F
2 4 2 4
3 1 3 1
5 Detent option
O - Spring return
D - Denter, spring centered
6 Lever
L - Lever
7 Housing material
Blank - Cartridge only
A- Aluminum
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-50 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MLV9-12 - Directional valve
Manual lever valve, spool
60 L/min (15.9 USgpm) • 210 bar (3000 psi)
MLV9-12-A/B/E/F
D
34.5
(1.36)
138
(5.43)
28.7
137.6 (1.13)
(5.42)
4 51.6
74.4 101.6 3 (2.03)
(2.93) (04.00) 2 Slots
127 2 8.75
(05.00) (.344)
31.75 (1.25) Hex
1
31.75 (1.25) Hex 31.8 10.3 68.28 31.8
(1.25) (0.41) (02.688) (1.25)
63.5 88.9
1.0625” - 12 Thd (2.500) (03.50)
4 Lever Position
Lever Position
90.9
(3.58)
3
00
2 00 01
01 03 02
03 02
1 04
04
Ø 20.57 (0.810)
Ø 22.15 (0.872)
Ø 23.74 (0.935)
Spare parts
Lever - 21113
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-51
3CP2 - Series check valve
Check, manually operated
5.5-15 L/min (1.5-4 USgpm) • 210 bar (3000 psi)
Operation Features
The poppet seals flow from Flow from port 2 to 1 should Cartridge design with
2 ports 1 to 2, depressing the be avoided - if required machined seats and precision
hand knob lifts the poppet from please consult our technical ground balls gives excellent
its seat permitting flow the flow department. flow reseat characteristics.
rate is determined by the size of
1 the orifice and the pressure in
the system, various orifice sizes
are available.
Sectional view
Performance data
Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49° C (120°F)
Max pressure 210 bar (3000 psi)
D Rated flow .9 mm orifice 5.5 L/min (1.4 US gpm), 1.5 mm orifice 15 L/min
(4 US gpm)
Internal leakage .3 ml/min nominal (5 dpm)
Temperature range -30° to 90°C (-22° to 194°F)
Cavity A879 (see Section M)
Torque cartridge into cavity 45 Nm (33 lbs ft)
Mounting position Unrestricted
Filtration BS5540/4 Class 18/13 (25 micron or better)
Nominal viscosity range 5 to 500 cSt
Cartridge material All steel construction. External parts electroless zinc plated.
Standard housing materials Aluminum
Weight .05 kg (.11 lbs)
Seal kit SK187 (Nitrile) SK187V (Viton®)
Viton is a registered trademark of E.I. DuPont
Pressure drop
1
Flow - L/min
Description 0 2 4 6 8 10 12 14 16
2904 200
These cartridges permit 2541 175
a small regulated flow to
pass when the hand knob 2178 150
Pressure - bar
Pressure - psi
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-52 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
3CP2 - Series check valve
Check, manually operated
5.5-15 L/min (1.5-4 USgpm) • 210 bar (3000 psi)
1 2 3 4
Aluminum Steel
4 Seals
0 Cartridge only
S - Nitrile
2W 1/4” BSP A1485
SV - Viton
3W 3/8” BSP A1043 A18175 D
6T 3/8” SAE A15676 A14843
See section J for housing details.
Dimensions
mm (inch)
50.0 (1.97)
24.00
A/F
2 holes 12.80
Ø6.8 (0.50)
(0.27) thro’
2
38.5
(1.52) 22.00 50.80
approx (0.87) (2.00)
1
6.00
24.00 A/F (0.24) 15.90
16.00 (0.63)
(0.63) 6.00
(0.24) 31.80 (1.25)
19.00 (0.75)
3/4 16UNF
27.00
(1.06)
approx
2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-53
MPV1-10 - Manual pull valve
Poppet type, normally closed valve
45 L/min (11.9 USgpm) • 210 bar (3000 psi)
2 Operation Features
This valve blocks flow form Hardened and ground poppet
port 2 to port 1 and will allow and seat with very low internal
flow form port 1 to port 2 leakage
1 when the spring bias is
overcome.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49° C (120°F)
D Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 45 L/min (11.9 USgpm)
Internal leakage, port 2 to port 1 5 drops/min. maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-10-2
All general purpose hydraulic fluids such as:
Fluids MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
Weight cartridge only 0,11 kg (0.24 lbs)
Seal kit 565803 (Buna-N), 566086 (Viton®)
Viton is a registered trademark of E.I. DuPont
4
50
40 3
30 2
20
1
10
0 0 Warning
Back pressure of
0 5 10 16 bar (240 psi)
Flow - USgpm (105 SUS oil @ 120°F) will unseat the poppet.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-54 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MPV1-10 - Manual pull valve
Poppet type, normally closed valve
45 L/min (11.9 USgpm) • 210 bar (3000 psi)
4 Type
T - Stem only
K - Knob
2
2X 7.1
41,3
(0.28) 63.6
(1.63) (2.50)
19.2
25,4 (1.0) Hex (0.75)
19.0
1 (0.75)
9.5 25.4
(0.37) (1.00)
0.875" -14 Thd. 63.5
31,7 (2.50)
(1.25)
2
Ø 15,80 (0.622)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-55
MPV3-10 - Manual pull valve
Normally closed valve
45 L/min (11.9 USgpm) • 210 bar (3000 psi)
2 Operation Features
This valve blocks flow form When the valve is actuated Hardened and ground poppet
port 2 to port 1 and will allow free flow is allowed in both and seat with very low internal
flow form port 1 to port 2 directions. leakage
1 when the spring bias is
overcome.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
D Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 45 L/min (11.9 USgpm)
Internal leakage (port 2 to port 1) 5 drops/min. maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
Weight cartridge only 0,11 kg (0.24 lbs)
Seal kit 565803 (Buna-N), 566086 (Viton®)
Viton is a registered trademark of E.I. DuPont
4
50
40 3
30 2
20
1
10
Warning
0 0
Back pressure of
0 5 10 16 bar (240 psi)
Flow - USgpm (105 SUS oil @ 120°F) will unseat the poppet.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-56 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MPV3-10 - Manual pull valve
Normally closed valve
45 L/min (11.9 USgpm) • 210 bar (3000 psi)
1 2 3 4 5
38,1
(1.500)
3,18
(0.125)
travel
2
2X 7.1
52,2 (0.28) 63.6
(2.134) (2.50)
19.1
(0.75)
19.0
85,9 1 (0.75)
(3.381) 25,4 9.5 25.4
(1.0) (0.37) (1.00)
Hex 63.5
(2.50)
0.875"-14 Thd.
31,7
(1.25) 2
1
Ø 15,80 (0.622)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-57
MSV1-12 - Manual push valve
Push and twist directional control valve
41.8 L/min (11 USgpm) • 210 bar (3000 psi)
2 Operation Features
In the normal position, Hardened, ground and honed
the valve allows flow from sleeve and spool for low
port 1 to port 2 while port 3 internal leakage. Detent allows
3 1 is blocked. In the actuated valve to be fixed in position
position, flow is allowed from
port 3 to port 1 while port 2 is
blocked.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49° C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
D Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 41,8 L/min (11 USgpm)
Internal leakage 350 cc/min (21.5 in3/min)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-12-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
Weight cartridge only 0,29 kg (0.66 lbs)
Seal kit 9900171-000 (Buna-N), 9900172-000 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
Pressure drop
Flow (L/min)
1 0 10 20 30 40
160
Description
10
This is a manually operated 140
push and twist type 2 position 3
ported directional control 120
valve. Ideal for isolating a 8
Pressure Drop - bar
Pressure Drop - psi
60 A
4
40
2
20
0 0
0 1 2 3 4 5 6 7 8 9 10 11
Flow (USgpm)
A - P1 to P2
B - P3 to P1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-58 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV1-12 - Manual push valve
Push and twist directional control valve
41.8 L/min (11 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
38,1 (1.50)
68.1
(2.68)
2xØ10.31± 0.12
(0.406± .005)
68,1 12.7
(2.68) (0.50)
28.7
(1.13)
82.55± 0.25 3 2
(3.250± .010)
31.8 51.6
108 (2.031)
(1.25) (4.25) 1
Hex
76.2
(3.00)
1 1/16”-12 25.4 25.4
UN-2A Thd. (1.00) 88.9 (1.00)
(3.50)
67,8
(2.67)
22,1 (.870)
23,9 (0.940)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-59
MSV11-10 - Manual push valve
Push and twist directional control valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
2 Operation Features
In the normal position, the Hardened, ground and honed
valve allows flow from port 1 sleeve and spool for low
to port 2 while port 3 is internal leakage. Detent allows
3 1 blocked. In the actuated valve to be fixed in position.
position, flow is allowed from Working Pressure 350 bar.
port 3 to port 1 while port 2 is
blocked.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40°to 120°C(-40° to 248°F)
Cavity C-l0-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum and Steel
Weight cartridge only 0.25 kg (0.55 lbs)
Seal kit 889624 (Buna-N), 889628 (Viton®)
Viton is a registered trademark of E.I. DuPont
160 11
B
Pressure Drop - psi
Description 140
9
This is a manually operated 120
high pressure push and twist
type 2 position 3 ported 100 7
A
directional control valve. Ideal 80
for isolating a system until 5
flow is required. 60
40 3
20 1
0
0 1 2 3 4 5 6
Flow (USgpm)
A - Port 1 to port 2
B - Port 3 to port 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-60 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV11-10 - Manual push valve
Push and twist directional control valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
71
(2.80)
35.1
(1.38)
71.0 3
(2.80)
2 63.5
(2.50) 76.2 19.1
2X Ø7.14 (3.00) (0.75)
(0.28) 1
3
46.0
(1.81)
Warning
2
Aluminum housings can be
used for pressures up to 210 bar
(3000 psi). Steel housings must
1 be used for operating pressures
above 210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-61
MSV11-12 - Manual push valve
Push and twist directional control valve
30 L/min (8 USgpm) • 350 bar (5000 psi)
2 Operation Features
In the normal position, the Hardened, ground and honed
valve allows flow from port 1 sleeve and spool for low
to port 2 while port 3 is internal leakage. Detent allows
3 1 blocked. In the actuated valve to be fixed in position.
position, flow is allowed from Working Pressure 350 bar.
port 3 to port 1 while port 2 is
blocked.
Pressure drop
3 Flow (L/min)
0 10 20 30 40
160
2
10
140
120
8
Pressure Drop - bar
Pressure Drop - psi
1 100
B 6
80
Description
This is a manually operated 60 A
4
high pressure push and twist
type 2 position 3 ported 40
directional control valve. Ideal 2
for isolating a system until 20
flow is required.
0 0
0 1 2 3 4 5 6 7 8 9 10 11
Flow (USgpm)
A - P1 to P2
B - P3 to P1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-62 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV11-12 - Manual push valve
Push and twist directional control valve
30 L/min (8 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
64
(2.52)
68.7 2 51.6
(2.71) 88.9 (2.03)
28.7 3 (3.50)
(1.13) 101.6
2 X Ø10.31 (4.00)
(0.406) 1
31.8 (1.25) Hex
25.4 12.7 63.50 25.4
(1.00) (0.50) (2.50) (1.00)
1/16 - 12 UN - 2A Thd.
88.9
(3.50)
68.5
(2.70) 3 Warning
Aluminum housings can be
2
used for pressures up to 210 bar
(3000 psi). Steel housings must
be used for operating pressures
above 210 bar (3000 psi).
1 Ø 22.15 - 22.19
Ø 23.73 - 23.77 (0.872 - 0.874)
(0.934 - 0.936)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-63
MSV2-12 - Manual push valve
Push and twist directional control valve
38 L/min (10 USgpm) • 210 bar (3000 psi)
2 Operation Features
In the normal position, the Hardened, ground and honed
valve allows flow from port 1 to sleeve and spool for low
port 3 while port 2 is blocked. internal leakage. Detent allows
3 1 In the actuated position, flow valve to be fixed in position
is allowed from port 2 to port 1
while port 3 is blocked.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
D Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 38 L/min (10 USgpm)
Internal leakage 350 cc/min (21.5 in3/min)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-12-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
Weight cartridge only 0,29 kg (0.66 lbs)
Seal kit 9900171-000 (Buna-N), 9900172-000 (Viton®)
Viton is a registered trademark of E.I. DuPont
Pressure drop
1
Description 160
This is a manually operated
push and twist type 2 position 3 140
ported directional control valve.
Ideal for isolating a system until 120
flow is required.
Pressure Drop - psi
100
B
80
A
60
40
20
0
0 1 2 3 4 5 6 7 8 9 10 11
Flow (gpm)
A - P2 to P1
B - P1 to P3
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-64 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV2-12 - Manual push valve
Push and twist directional control valve
38 L/min (10 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
2 Size
5 Port size
12 - 12 size
0 - Cartridge only
D
3 Seal material
Code Port size Housing number
Blank - Buna-N Aluminum
V - Viton®
A6G 3/4” BSPP 02-161816
A12H SAE 12 02-160646
38,1 (1.50)
68.1
(2.68)
2xØ10.31± 0.12
(0.406± .005)
68,1 12.7
(2.68) (0.50)
28.7
(1.13)
82.55± 0.25 3 2
(3.250± .010)
31.8 51.6
(1.25) 108 (2.031)
Hex (4.25) 1
1 1/16”-12 76.2
(3.00)
UN-2A Thd. 25.4 25.4
(1.00) 88.9 (1.00)
67,8 (3.50)
(2.67)
22,1 (.870)
23,9 (0.940)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-65
MSV12-12 - Manual push valve
Push and twist directional control valve
38 L/min (10 USgpm) • 350 bar (5000 psi)
2 Operation Features
In the normal position, the Hardened, ground and honed
valve allows flow from port 1 sleeve and spool for low
to port 2 while port 3 is internal leakage. Detent allows
3 1 blocked. In the actuated valve to be fixed in position.
position, flow is allowed from Working Pressure 350 bar.
port 3 to port 1 while port 2 is
blocked.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 38 L/min (10 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40°to 120°C(-40° to 248°F)
Cavity C-l2-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum and Steel
Weight cartridge only 0,29 kg (0.66 Ibs)
Seal kit 9900171-000 (Buna-N), 9900172-000 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
Pressure drop
Flow (L/min)
1 0 10 20 30 40
160
10
140
Description
This is a manually operated 120
8
high pressure push and twist
Pressure Drop - bar
Pressure Drop - psi
60 A
4
40
2
20
0 0
0 1 2 3 4 5 6 7 8 9 10 11
Flow (USgpm)
A - P1 to P2
B - P3 to P1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-66 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV12-12 - Manual push valve
Push and twist directional control valve
38 L/min (10 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
Ø34.9
Ø 38.1 (1.50) (1.00)
64
(2.52)
2 51.6
68.7 88.9 (2.03)
(2.71) 28.7 3 (3.50)
(1.13) 101.6
2 X Ø10.31 (4.00)
(0.406) 1
68.5
(2.70) 3
2 Warning
Aluminum housings can be
used for pressures up to 210 bar
1 Ø 22.15 - 22.19 (3000 psi). Steel housings must
Ø 23.73 - 23.77 (0.872 - 0.874) be used for operating pressures
(0.934 - 0.936) above 210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-67
MSV5-12 - Manual push valve
Push and twist directional control valve
41.8 L/min (11 USgpm) • 210 bar (3000 psi)
2 Operation Features
In the normal position, the Hardened, ground and honed
valve allows flow from port 2 sleeve and spool for low
to port 1 while port 3 is blocked. internal leakage. Detent allows
3 1 In the actuated position, flow valve to be fixed in position
is allowed from port 3 to port 2
while port 1 is blocked.
1 Pressure drop
160
Description 140
This is a manually operated
push and twist type 2 position 120
Pressure Drop - psi
40
20
0
0 1 2 3 4 5 6 7 8 9 10 11
Flow (USgpm)
A - P2 to P1
B - P3 to P2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-68 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV5-12 - Manual push valve
Push and twist directional control valve
41.8 L/min (11 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
2 Size
5 Port size
12 - 12 size
0 - Cartridge only
D
3 Seal material
Code Port size Housing number
Blank - Buna-N
V - Viton® Aluminum
68.1
(2.68)
2xØ10.31± 0.12
(0.406± .005)
12.7
(0.50)
68,1
(2.68) 28.7
(1.13)
82.55± 0.25 3 2
(3.250± .010)
51.6
108 (2.031)
(4.25) 1
31.8
(1.25)
Hex 76.2
(3.00)
25.4 25.4
(1.00) 88.9 (1.00)
1 1/16”-12 (3.50)
UN-2A Thd.
67,8
(2.67)
22,1 (.870)
23,9 (0.940)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-69
MSV15-12 - Manual push valve
Push and twist directional control valve
41.8 L/min (11 USgpm) • 350 bar (5000 psi)
2 Operation Features
In the normal position, the Hardened, ground and honed
valve allows flow from port 2 to sleeve and spool for low
port 1 while port 3 is blocked. internal leakage. Detent allows
3 1 In the actuated position, flow valve to be fixed in position.
is allowed from port 3 to port 2 Working Pressure 350 bar.
while port 1 is blocked.
Sectional view
Performance data
Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
D Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 41,8 L/min (11 USgpm)
Internal leakage 350 cc/min (21.5 in3/min)
Temperature range -40°to 120°C(-40° to 248°F)
Cavity C-l2-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Steel
Weight cartridge only 0,29 kg (0.66 Ibs)
Seal kit 9900171-000 (Buna-N), 9900172-000 (Viton®)
Viton is a registered trademark of E.I. DuPont
3
Pressure drop
1 Flow (L/min)
Description 0 10 20 30 40
This is a manually operated
160
high pressure push and twist 10
type 2 position 3 ported 140
directional control valve. Ideal
for isolating a system until 120
flow is required. 8
Pressure Drop - bar
Pressure Drop - psi
100
B 6
80
60 A
4
40
2
20
0 0
0 1 2 3 4 5 6 7 8 9 10 11
Flow (USgpm)
A - P2 to P1
B - P3 to P2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-70 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV15-12 - Manual push valve
Push and twist directional control valve
41.8 L/min (11 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
Ø34.9
Ø 38.1 (1.50) (1.00)
64
(2.52)
2 51.6
68.7
(2.71) 88.9 (2.03)
28.7 3 (3.50)
(1.13) 101.6
2 X Ø10.31 (4.00)
(0.406) 1
31.8 (1.25) Hex
25.4 12.7 63.50 25.4
(1.00) (0.50) (2.50) (1.00)
1 1/16 - 12 88.9
UN - 2A Thd. (3.50)
68.5
(2.70) 3
2
Warning
Aluminum housings can be
used for pressures up to 210 bar
1 Ø 22.15 - 22.19
(0.872 - 0.874)
(3000 psi). Steel housings must
Ø 23.73 - 23.77
(0.934 - 0.936) be used for operating pressures
above 210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-71
MSV3-12 - Manual push valve
Push and twist, normally closed, directional control valve
53,2 L/min (14 USgpm) • 210 bar (3000 psi)
4 2 Operation Features
In the normal position, all Hardened, ground and honed
ports are blocked. In the sleeve and spool for low
actuated position, flow is internal leakage. Detent allows
3 1 allowed from port 3 to port 4 valve to be fixed in position
and from port 2 to port 1.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
D Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 53,2 L/min (14 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
Weight cartridge only 0,32 kg (0.71 lbs)
Seal kit 02-160979 (Buna-N), 02-160980 (Viton®)
4 Viton is a registered trademark of E.I. DuPont
1 Pressure drop
160
Description
This valve is a manually 140
operated push and twist to
switch, normally closed 2 120
position 4 ported directional
Pressure Drop - psi
60 A
40
20
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Flow (USgpm)
A - P3 to P4
B - P2 to P1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-72 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV3-12 - Manual push valve
Push and twist, normally closed, directional control valve
53,2 L/min (14 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
2 Size
5 Port size
12 - 12 size
0 - Cartridge only
D
3 Seal material
Code Port size Housing number
Blank - Buna-N
V -Viton® Aluminium
38,1 (1.50)
68.1
(2.68)
28.7
(1.13)
4 51.6
68,1 101.6 3 (2.03)
74.4
(2.68) (2.93) (4.00)
2 8.74± 0.12
127.0 (0.344± 005)
(5.00)
90,9
(3.58)
3
1
20,6 (.810)
22,1 (.872)
23,7 (.935)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-73
MSV13-12 - Manual push valve
Push and twist, normally closed, directional control valve
53,2 L/min (14 USgpm) • 350 bar (5000 psi)
4 2 Operation Features
In the normal position, all Hardened, ground and honed
ports are blocked. In the sleeve and spool for low
actuated position, flow is internal leakage. Detent allows
3 1 allowed from port 3 to port 4 valve to be fixed in position.
and from port 2 to port 1. Working Pressure 350 bar.
2
Pressure drop
1 Flow (L/min)
10 20 30 40 50
160
Description 140 10
This valve is a manually
operated high pressure push 120
and twist to switch, normally Pressure Drop - bar
Pressure Drop - psi
40
20
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Flow (USgpm)
A - P3 to P4
B - P2 to P1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-74 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV13-12 - Manual push valve
Push and twist, normally closed, directional control valve
53,2 L/min (14 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
Ø 38.1 (1.50)
64.2
(2.53)
28.7
(1.31)
69
(2.72) 4
101.6 3
74.4 (4.00)
(2.931)
31.8 (1.25) Hex 2 51.6
127.0 (2.031)
(5.00)
1 1/16 - 12
1
UN - 2A Thd.
31.8 31.8
(1.25) 10.3 78.6 (1.25)
4 (0.406) (3.094) 63.5
88.9 (2.50)
91.7 (3.50)
(3.61)
3
Warning
1 Ø 20.55 - 20.59 Aluminum housings can be
(0.809 - 0.811)
Ø 22.13 - 22.17 used for pressures up to 210 bar
(0.817 - 0.873) Ø 23.73 - 23.77 (3000 psi). Steel housings must
(0.934 - 0.936) be used for operating pressures
above 210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-75
MSV4-12 - Manual push valve
Push and twist, normally open, directional control valve
53,2 L/min (14 USgpm) • 210 bar (3000 psi)
4 2 Operation Features
In the normal position, flow is Hardened, ground and honed
allowed from port 3 to port 4 sleeve and spool for low
and from port 2 to port 1. In internal leakage. Detent allows
3 1 the actuated position, all ports valve to be fixed in position
are blocked.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
D Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 53,2 L/min (14 USgpm)
Internal leakage 350 cc/min (21.5 in3/min)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
Weight cartridge only 0,32 kg (0.71 lbs)
Seal kit 02-160979 (Buna-N), 02-160980 (Viton®)
4 Viton is a registered trademark of E.I. DuPont
Pressure drop
1
Description 160
This valve is a manually
operated push and twist 140
to switch, normally open 2
position 4 ported directional 120
valve. This is ideal for isolating
Pressure Drop - psi
an actuator.
100
80 B
60 A
40
20
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Flow (USgpm)
A - P3 to P4
B - P2 to P1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-76 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV4-12 - Manual push valve
Push and twist, normally open, directional control valve
53,2 L/min (14 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
2 Size
5 Port size
12 - 12 size
0 -Cartridge only
D
3 Seal material
Blank - Buna-N Code Port size Housing number
V - Viton® Aluminium
68.1
(2.68)
28.7
(1.13)
68,1
(2.68) 4 51.6
101.6 3 (2.03)
74.4
(2.93) (4.00)
2 8.74± 0.12
127.0 (0.344± 005)
(5.00)
31.8
(1.25)
31.8 68.28± 0.25
Hex (1.25) 10.3 (0.344± 005)
(0.41) 88.9 31.8
63.5±0.12 (3.50) (1.25)
1 1/16”-12 (2.500± 005)
UN-2A Thd.
4
90,9
(3.58)
3
1
20,6 (.810)
22,1 (.872)
23,7 (.935)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-77
MSV14-12 - Manual push valve
Push and twist, normally open, directional control valve
53,2 L/min (14 USgpm) • 350 bar (5000 psi)
4 2 Operation Features
In the normal position, flow is Hardened, ground and honed
allowed from port 3 to port 4 sleeve and spool for low
and from port 2 to port 1. In internal leakage. Detent allows
3 1 the actuated position, all ports valve to be fixed in position.
are blocked. Working Pressure 350 bar.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 53,2 L/min (14 USgpm)
Internal leakage 350 cc/min (21 in3/min) @ 219 bar (3000 psi)
Temperature range -40°to 120°C(-40° to 248°F)
Cavity C-l2-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum and Steel
Weight cartridge only 0,32 kg (0.71 lbs)
Seal kit 02-160979 (Buna-N), 02160981(Viton)
4 Viton is a registered trademark of E.I. DuPont
2 Pressure drop
Flow (L/min)
1 10 20 30 40 50
160
140 10
Description
This valve is a manually 120
operated high pressure push Pressure Drop - bar
Pressure Drop - psi
40
20
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Flow (USgpm)
A - P3 to P4
B - P2 to P1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-78 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV14-12 - Manual push valve
Push and twist, normally open, directional control valve
53,2 L/min (14 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
Ø 38.1 (1.50)
64.2
(2.53)
28.7
(1.31)
68.9
(2.71) 4
101.6 3
74.4 (4.00)
(2.931)
2 51.6
31.8 (1.25) Hex 127.0 (2.031)
(5.00)
1 1/16-12 UN-2A THD.
1
31.8 31.8
(1.25) 10.3 78.6 (1.25)
(0.406) (3.094) 63.5
4 88.9 (2.50)
(3.50)
91.7
(3.61)
3
Warning
Aluminum housings can be
2 used for pressures up to 210 bar
(3000 psi). Steel housings must
be used for operating pressures
Ø 20.55 - 20.59 above 210 bar (3000 psi).
Ø 22.13 - 22.17 (0.809 - 0.811)
(0.871 - 0.873)
Ø 23.73 - 23.77
(0.934 - 0.936)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-79
MSV6-12 - Manual push valve
Push and twist, normally closed, directional control valve
53,2 L/min (14 USgpm) • 210 bar (3000 psi)
2 4 Operation Features
In the normal position, all Hardened, ground and honed
ports are blocked. In the sleeve and spool for low
actuated position, flow is internal leakage. Detent allows
3 1 allowed from port 3 to port 2 valve to be fixed in position
and from port 4 to port 1.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
D Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 53,2 L/min (14 USgpm)
Internal leakage 350 cc/min (21.5 in3/min)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
Weight cartridge only 0,32 kg (0.71 lbs)
Seal kit 02-160979 (Buna-N), 02-160980 (Viton®)
Viton is a registered trademark of E.I. DuPont
4
1 Pressure drop
160
Description
This valve is a manually 140
operated push and twist to
switch, normally closed 2 120
position 4 ported directional
Pressure Drop - psi
60 A
40
20
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Flow (USgpm)
A - P4 to P1
B - P3 to P2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-80 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV6-12 - Manual push valve
Push and twist, normally closed, directional control valve
53,2 L/min (14 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
2 Size
5 Port size
12 - 12 size
0 - Cartridge only
D
3 Seal material
Code Port size Housing number
Blank - Buna-N
V - Viton® Aluminium
38,1 (1.50)
68.1
(2.68)
28.7
(1.13)
68,1
(2.68) 4 51.6
101.6 3 (2.03)
74.4
(2.93) (4.00)
2 8.74± 0.12
127.0 (0.344± 005)
(5.00)
31.8
(1.25)
Hex 31.8 68.28± 0.25
(1.25) 10.3 (0.344± 005)
(0.41) 88.9 31.8
63.5±0.12 (3.50) (1.25)
1 1/16”-12 (2.500± 005)
UN-2A Thd.
4
90,9
(3.58)
3
1
20,6 (.810)
22,1 (.872)
23,7 (.935)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-81
MSV16-12 - Manual push valve
Push and twist, normally closed, directional control valve
53.2 L/min (14 USgpm) • 350 bar (5000 psi)
4 2 Operation Features
In the normal position, all Hardened, ground and honed
ports are blocked. In the sleeve and spool for low
actuated position, flow is internal leakage. Detent allows
3 1 allowed from port 3 to port 4 valve to be fixed in position.
and from port 1 to port 2. Working Pressure 350 bar.
2
Pressure drop
Flow (L/min)
1 10 20 30 40 50
160
Description 140 10
This valve is a manually
120
operated high pressure push
40
20
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Flow (USgpm)
A - P4 to P1
B - P3 to P2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-82 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV16-12 - Manual push valve
Push and twist, normally closed, directional control valve
53.2 L/min (14 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
Ø 38.1 (1.50)
64.2
(2.53)
28.7
(1.31)
68.9
(2.71) 4
101.6 3
74.4 (4.00)
(2.931)
2 51.6
127.0 (2.031)
31.8 (1.25) Hex
(5.00)
1
1 1/16-12 UN-2A T 31.8 31.8
(1.25) 10.3 78.6 (1.25)
(0.406) (3.094) 63.5
88.9 (2.50)
(3.50)
91.7
(3.61)
Warning
Aluminum housings can be
used for pressures up to 210 bar
1 Ø 20.55 - 20.59 (3000 psi). Steel housings must
Ø 22.13 - 22.17 (0.809 - 0.811) be used for operating pressures
(0.871 - 0.873) Ø 23.73 - 23.77 above 210 bar (3000 psi).
(0.934 - 0.936)
L, K & N Type Actuation
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-83
MSV17-10 - Manual push valve
Push and twist directional control valve
20 L/min (5.3 USgpm) • 350 bar (5000 psi)
4 2 Operation Features
In the normal position, flow is Hardened, ground and honed
allowed from port 3 to port 4 sleeve and spool for low
and from port 2 to port 1. In internal leakage. Detent allows
3 1 the actuated position, flow is valve to be fixed in position.
allowed from port 3 to port 2 Working Pressure 350 bar.
and from port 4 to port 1.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 20 L/min (5.3 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40°to 120°C(-40° to 248°F)
Cavity C-l0-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum and Steel
Weight cartridge only 0.28 kg (0.61 lbs)
Seal kit (Buna-N), (Viton®)
4 Viton is a registered trademark of E.I. DuPont
2
Pressure drop
Flow - L/min (21,8 cSt oil @ 490 F)
1
0 5 10 15 20
“L” Detent 160
style 10
140
A
120
Description D
Pressure - psi
Pressure - bar
100 7
This valve is a manually B
operated high pressure push 80
and twist to switch, 2 position
4 ported directional valve. 60
This is ideal for reversing the C 3
direction of an actuator. 40
20
0
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5
Flow - USgpm (105 SUS oil @ 120 F) 0
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-84 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV17-10 - Manual push valve
Push and twist directional control valve
20 L/min (5.3 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
71.1
(2.80)
19
(0.75)
4
3 50.8
71.1 76.2 (2.00)
(2.80) 88.9 (3.00) 2
34.9 (3.50)
(1.37) 2 X Ø7.11
1 (0.280)
22.2
(0.87) 9.5 57.15 22.2
(2.250) (0.87)
25.4 (1.00) Hex 44.45 (0.37) 76.2
(1.750) (3.00)
4
62
(2.44)
3
2 Warning
Aluminum housings can be
used for pressures up to 210 bar
1 (3000 psi). Steel housings must
15.78 - 15.82
17.38 - 17.42
(0.621 - 0.623) be used for operating pressures
(0.684 - 0.686) 18.95 - 18.99 above 210 bar (3000 psi).
(0.746 - 0.748)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-85
MSV7-12 - Manual push valve
Push and twist directional control valve
45 L/min (11.9 USgpm) • 210 bar (3000 psi)
4 2 Operation Features
In the normal position, flow is Hardened, ground and honed
allowed from port 3 to port 4 sleeve and spool for low
and from port 2 to port 1. In internal leakage. Detent allows
3 1 the actuated position, flow is valve to be fixed in position
allowed from port 3 to port 2
and from port 4 to port 1.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 45 L/min (11.9 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
Weight cartridge only 0,32 kg (0.71 lbs)
Seal kit 02-160979 (Buna-N), 02-160980 (Viton®)
4 Viton is a registered trademark of E.I. DuPont
Pressure drop
1
160
140
Description
This valve is a manually 120
operated push and twist to
Pressure Drop - psi
40
20
0
0 1 2 3 4 5 6 7 8 9 10 11 12
Flow (USgpm)
A - P4 to P1, P3 to P2
B - P2 to P1, P3 to P4
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-86 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV7-12 - Manual push valve
Push and twist directional control valve
45 L/min (11.9 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
2 Size
5 Port size
12 - 12 size
0 - Cartridge only
D
3 Seal material
Blank - Buna-N
Code Port size Housing number
V - Viton®
Aluminium
68.1
(2.68)
28.7
68,1 (1.13)
(2.68) 51.6
4
101.6 3 (2.03)
74.4
(2.93) (4.00)
2 8.74± 0.12
127.0 (0.344± 005)
31.8 (5.00)
(1.25)
Hex 31.8 68.28± 0.25
(1.25) 10.3 (0.344± 005)
(0.41) 88.9 31.8
1 1/16”-12 63.5±0.12 (3.50) (1.25)
UN-2A Thd. (2.500± 005)
4
90,9
(3.58)
3
1
20,6 (.810)
22,1 (.872)
23,7 (.935)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-87
MSV17-12 - Manual push valve
Push and twist directional control valve
20 L/min (5.3 USgpm) • 350 bar (5000 psi)
4 2 Operation Features
In the normal position, flow is Hardened, ground and honed
allowed from port 3 to port 4 sleeve and spool for low
and from port 2 to port 1. In internal leakage. Detent allows
3 1 the actuated position, flow is valve to be fixed in position.
allowed from port 3 to port 2 Working Pressure 350 bar.
and from port 4 to port 1.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 20 L/min (5 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40°to 120°C(-40° to 248°F)
Cavity C-l2-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum and Steel
Weight cartridge only 0,32 kg (0.71 Ibs)
4 Seal kit 02-160979 (Buna-N), 02-160980 (Viton®)
Viton is a registered trademark of E.I. DuPont
Pressure drop
2
Flow (L/min)
0 10 20
1 160
10
140
Description 120
8 Pressure Drop - bar
Pressure Drop - psi
0 0
0 1 2 3 4 5
Flow (USgpm)
A - P4 to P1 and P3 to P2
B - P2 to P1 and P3 to P4
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-88 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
MSV17-12 - Manual push valve
Push and twist directional control valve
20 L/min (5.3 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
Ø 38.1 (1.50)
64.2
(2.53)
28.7
68.9 (1.31)
(2.71)
4
101.6 3
74.4 (4.00)
(2.931)
31.8 (1.25) Hex 2 51.6
127.0 (2.031)
(5.00)
1 1/16-12
UN -2 THD 1
31.8 31.8
(1.25) 10.3 78.6 (1.25)
(0.406) (3.094) 63.5
4
88.9 (2.50)
91.7
(3.50)
(3.61)
3
Warning
2 Aluminum housings can be
used for pressures up to 210 bar
(3000 psi). Steel housings must
be used for operating pressures
1 Ø 20.55 - 20.59 above 210 bar (3000 psi).
22.13 - 22.17 (0.809 - 0.811)
(0.871 - 0.873) 23.73 - 23.77
(0.834 - 0.936)
L, K & N Type Actuation
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-89
PTS7-10 - Pilot to shift valve
2/2, pilot operated directional control valve
30 L/min (8 USgpm) • 210 bar (3000 psi)
3 Operation Features
This valve allows flow The spring chamber for this Hardened, ground and honed
between ports 2 and 3 until valve is externally vented to sleeve and spool for low
sufficient pressure at port 1 atmosphere. internal leakage.
overcomes the spring bias,
which closes both ports.
1 2
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
D Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 30 L/min (8 USgpm)
Internal leakage 164 cc/min (10 in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
3 160 - 11,0 bar (160 psi)
Pilot displacement volume 0,49 cm3 (0.02 in3)
Cavity C-10-3
2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
1 Weight cartridge only 0,10 kg (0.23 lbs)
Seal kit 889624 (Buna-N), 889628 (Viton®)
Viton is a registered trademark of E.I. DuPont
60
4
Pressure Drop - bar
Pressure Drop - psi
50
3
40
30 2
20
1
10
0 0
0 1 2 3 4 5 6 7 8
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-90 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS7-10 - Pilot to shift valve
2/2, pilot operated directional control valve
30 L/min (8 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
3 Seal material
A2G 1/4” BSPP – 876705 – 00 - None D
A3G 3/8” BSPP – 876714 – (Only required if valve has special
Blank - Buna-N A6H SAE 6 – 876704 – features, omitted if ”00”.)
V - Viton
A8H SAE 8 – 876711 –
See section J for housing details.
50 9.5 57.15
(1.97) (0.38) (2.250)
3 75.4
46,0 (2.97)
(1.81)
Warning
Aluminum housings can be
1 used for pressures up to 210 bar
(3000 psi). Steel housings must
Ø 15,82 (0.623) be used for operating pressures
Ø 17,42 (0.686) above 210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-91
PTS17-10 - Pilot to shift valve
2/2, pilot operated directional control valve
30 L/min (8 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow The spring chamber for this Hardened, ground and honed
between ports 2 and 3 until valve is externally vented to sleeve and spool for low
sufficient pressure at port 1 atmosphere. internal leakage. Working
overcomes the spring bias, pressure 350 bar.
which closes both ports.
1 2
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
D Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 30 L/min (8 USgpm)
Internal leakage 210 cc/min (13in3/min) @ 350 bar (5000 psi)
Temperature range -40°to 120°C(-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 0,49 cm3 (0.02 in3)
Cavity C-l0-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
3
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum and Steel
Weight cartridge only 0,10 kg (0.23 lbs)
Seal kit 889624 (Buna-N), 889628 (Viton®)
2 Viton is a registered trademark of E.I. DuPont
1
Pressure drop curves
Cartridge only
50
3
40
30 2
20
1
10
0 0
0 1 2 3 4 5 6 7 8
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-92 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS17-10 - Pilot to shift valve
2/2, pilot operated directional control valve
30 L/min (8 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
25.7
(1.01)
35.1
(1.38)
25.65
(1.010) 3
25.4 (1.0) Hex 63.5
2 19.1
(2.50) 76.2
2X Ø7.14 (3.00) (0.75)
(0.28) 1
2
Warning
Aluminum housings can be
used for pressures up to 210 bar
(3000 psi). Steel housings must
1
15.78 - 15.82 be used for operating pressures
(0.621 - 0.623) above 210 bar (3000 psi).
17.38 - 17.42
(0.684 - 0.686)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-93
PTS17-12 - Pilot to shift valve
2/2, pilot operated directional control valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow The spring chamber for this Hardened, ground and honed
between ports 2 and 3 until valve is externally vented to sleeve and spool for low
sufficient pressure at port 1 atmosphere. internal leakage. Working
overcomes the spring bias, pressure 350 bar.
which closes both ports.
1 2
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
D Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 114 L/min (30 USgpm)
Internal leakage 210 cc/min (13in3/min) @ 350 bar (5000 psi)
Temperature range -40°to 120°C(-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
120 - 8,3 bar (120 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 0,49 cm3 (0.02 in3)
Cavity C-l2-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum and Steel
Weight cartridge only 0.25 kg (0.55 lbs)
Seal kit 9900171 (Buna-N), 9900172 (Viton®)
Viton is a registered trademark of E.I. DuPont
100
80
5
60
40
20
0
0 5 10 15 20 25 30
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-94 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS17-12 - Pilot to shift valve
2/2, pilot operated directional control valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
Blank - Buna-N
A10H SAE 10 02-160642
00 - None
(Only required if valve has special
D
V - Viton ® A12H SAE 12 02-160646 features, omitted if ”00”)
S4G 1/2” BSPP 02-169815
S6G 3/4” BSPP 02-169814
S10T SAE 10 02-161070
S12T SAE 12 02-169816
See section J for housing details.
2
Warning
Aluminum housings can be
used for pressures up to 210
bar (3000 psi). Steel housings
must be used for operating
1 Ø 22.15 - 22.19
(0.872 - 0.874) pressures above 210 bar
(3000 psi).
Ø 20.54 - 20.58
(0.809 - 0.811)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-95
1SB10 - Brake sequence valve
Brake sequence directional valve
10 L/min (2.5 USgpm) • 350 bar (5000 psi)
2 Operation Features
When the pressure in the inlet When the pressure in the inlet Cartridge design enabling
line is below the switching line exceeds the switching speedy servicing when
pressure (15 bar), the outlet pressure, the spool will slide mounted in a body or in a
will be connected to the tank, back, opening inlet to outlet. composite manifold.
the spool being held in place
by the spring force.
3 1
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Max working pressure 350 bar (5000 psi)
Rated flow 10 L/min (2.5 US gpm)
D Internal leakage 50 ml/min nominal
Temperature range -30° to 90°C (22° to 194°F)
Cavity A893 (see Section M)
Torque cartridge into cavity 60 Nm (44 lbs ft)
Tank (3) Mounting position Unrestricted
Filtration BS5540/4 Class 18/13 (25 micron or better)
Nominal viscosity range 5 to 500 cSt
Cartridge material All working parts hardened and ground steel. External
surfaces zinc plated.
Outlet (2) Standard housing materials Aluminum and Steel
Weight 1SB10 .12 kg (.26 lbs), 1SB15 1.0 kg (2.2 lbs)
Seal kit SK182 (Nitrile) SK182V (Viton®)
Viton is a registered trademark of E.I. DuPont
Inlet (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-96 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1SB10 - Brake sequence valve
Brake sequence directional valve
10 L/min (2.5 USgpm) • 350 bar (5000 psi)
1 2 3 4
Dimensions
mm (inch)
19.0
7.0 (0.28) (0.75)
38.1
Tank (3) 25.4 (1.00) (1.50)
51.5
(2.03) 50.8 (2.00)
Outlet (2)
Inlet (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-97
1SB304 - Brake release shuttle valve
Brake release shuttle directional valve
30 L/min (8 USgpm) • 350 bar (5000 psi)
2 Operation Features
When pressure in the inlet When the inlet pressure is Cartridge design enabling
exceeds the set pressure, flow removed, the spool returns to speedy servicing when
is allowed from inlet to outlet its normal position, opening mounted in a body or in a
closing off the tank line. the outlet port to tank and composite manifold.
closing the inlet port.
3 1 4
Pilot (1)
101.5 7
systems where a pressure is
87.0 6
required in the main system
before the brake is removed. 72.5 5
2-3
58.0 4
43.5 3
29.0 2
14.5 1
0 0
0 1.3 2.6 3.9 5.2 6.5 7.8
Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-98 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1SB304 - Brake release shuttle valve
Brake release shuttle directional valve
30 L/min (8 USgpm) • 350 bar (5000 psi)
1 2 3 4 5
Dimensions
mm (inch)
17.0 A/F
67.0
(2.64)
Inlet (3)
Outlet (2)
Pilot (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-99
1RDS702 - Pilot to shift valve
Pilot to shift directional valve
80 L/min (20 USgpm) • 420 bar (6090 psi)
3 Operation Features
When a pre-set pilot pressure When the pilot pressure falls Cartridge design enabling
is reached the spool moves the valve will return to its speedy servicing when
back against the spring either normal position. mounted in a body or in a
opening or closing the line composite manifold.
between inlet and outlet.
1 2 4
Pilot (1)
Pressure - bar
0 0
0 5.3 10.6 15.9 21.2 26.5
Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-100 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1RDS702 - Pilot to shift valve
Pilot to shift directional valve
80 L/min (20 USgpm) • 420 bar (6090 psi)
1 2 3 4 5 6
29.0
32.0 A/F (1.14)
4
27.0 3 53.5
(2.11) 4 78.0
(1.06) 111.3 (3.07)
3 2 127.0
8.5 (4.38) 154.0
2 (6.06) (5.0)
(0.33)
TYP 1 approx
1-1/16 12UN-2B
25.0 4.8 50.5 25.0
(0.98) (0.19) (1.99) (0.98)
50.8
91.9 (3.61) (2.0)
101.6 (4.0)
4
97.7
(3.85)
3
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-101
PTS1-10 - Pilot to shift valve
Pilot operated, directional control valve
30 L/min (7.9 USgpm) • 210 bar (3000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 2 and 3 while between port 3 and port 4 sleeve and spool for low
blocking port 4 until sufficient while blocking port 2. During internal leakage.
pressure has been applied to the cross-over transition, all
port 1 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
1 2 4 externally vented to
atmosphere.
D Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 30 L/min (8 USgpm)
Internal leakage 164 cc/min (10 in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 0,49 cm3 (0.02 in3)
4
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
3 Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
Weight Cartridge only 0,14 kg (0.32 lbs)
2 Seal kit 889625 (Buna-N), 566080 (Viton®)
Viton is a registered trademark of E.I. DuPont
60
4
3
or
50
3
to
40 3
4
rt
Po
30
2
20
10 1
0 0
0 1 2 3 4 5 6 7 8
Flow - USgpm (105 SUS oil @ 1200F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-102 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS1-10 - Pilot to shift valve
Pilot operated, directional control valve
30 L/min (7.9 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
36.7 4
(1.44) 76.2 3 52.6
0.875” - 14 Thd. (3.00) (2.07)
88.9 2 7.14
(3.50) (0.281)
4
1
57.15 25.4
25.4 9.5 (1.00)
(1.00) (0.38) (2.250) 2-Slots
61,9 76.2
(2.44) (3.00)
3
1
Ø 15,80 (0.622)
Ø 17,40 (0.685)
Ø 18,97 (0.747)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-103
PTS11-12 - Pilot to shift valve
Pilot operated, directional control valve
76 L/min (20 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 2 and 3 while between port 3 and port 4 sleeve and spool for low
blocking port 4 until sufficient while blocking port 2. During internal leakage. Working
pressure has been applied to the cross-over transition, all pressure 350 bar.
port 1 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
1 2 4 externally vented to
atmosphere.
D Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 76 L/min (20 USgpm)
Internal leakage 250 cc/min (15in3/min) @ 350 bar (5000 psi)
Temperature range -40°to 120°C(-40° to 248°F)
Pilot pressures 80-5,5 bar (80 psi)
120-8,3 bar (120 psi)
Pilot displacement volume 0,49 cm3 (0.02 in3)
Cavity C-l2-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
4 Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum, Steel
Weight cartridge only 0.32 kg (0.70 lbs)
Seal kit 02-160979 (Buna-N), 02-160980 (Viton®)
3
Viton is a registered trademark of E.I. DuPont
A - P3 to P2
2 B - P3 to P4
Pressure drop curves
Cartridge only
Flow-L/min (21,8 cSt Oil @490C)
1
25 50 75 100
180
Description
160
This is a 3-way 2 position,
high pressure pilot operated, 140
10
directional control valve ideal
A
for selecting a function when 120
the pilot pressure is applied or
Pressure Drop-bar
B
Pressure Drop-psi
removed. 100
80
5
60
40
20
0
0 5 10 15 20 25 30
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-104 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS11-12 - Pilot to shift valve
Pilot operated, directional control valve
76 L/min (20 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
35.1
28.7 (1.38)
35.05 (1.31)
(1.38)
31.75 (1.25) Hex 4
74.4 101.6 3
(2.931) (4.00)
2 51.6
1 1/16-12 UN THD (2.031)
127.0
(5.00)
1
4 31.8 31.8
(1.25) 10.3 78.6 (1.25)
(0.406) (3.094) 63.5
91.69 88.9 (2.50)
(3.610) (3.50)
3
Warning
Aluminum housings can be
1 used for pressures up to 210 bar
Ø 20.54 - 20.58
22.13 - 22.17 (0.809 - 0.811) (3000 psi). Steel housings must
(0.871 - 0.873) 23.73 - 23.77 be used for operating pressures
(0.834 - 0.936) above 210 bar (3000 psi).
PTS11-12X-0-XXX-00
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-105
PTS11-10 - Pilot to shift valve
Pilot operated, directional control valve
30 L/min (8 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 2 and 3 while between port 3 and port 4 sleeve and spool for low
blocking port 4 until sufficient while blocking port 2. During internal leakage. Working
pressure has been applied to the cross-over transition, pressure 350 bar.
port 1 and the spring bias is all ports are blocked. The
overcome. spring chamber for this
1 2 4 valve is externally vented to
atmosphere.
3
Performance data
Ratings and specifications
D 2
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
1 4 Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Sectional view Rated flow 30 L/min (8 USgpm)
Internal leakage 210 cc/min (13 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 0,49 cm3 (0.02 in3)
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum, Steel (5000 PSI)
4 Weight cartridge only 0,14 kg (0.32 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
Pressure drop curves
Cartridge only
1
Flow - L/min (12,8 cSt oil @ 490C)
5 10 15 20 25 30
Description 5
70
This is a 3-way 2 position,
high pressure pilot operated, 60
2
4
to
removed. 40 3
4
rt
Po
30
2
20
10 1
0 0
0 1 2 3 4 5 6 7 8
Flow - USgpm (105 SUS oil @ 1200F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-106 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS11-10 - Pilot to shift valve
Pilot operated, directional control valve
30 L/min (8 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
62
(2.44)
3
2
Warning
Aluminum housings can be
used for pressures up to 210
bar (3000 psi). Steel housings
must be used for operating
15.78 - 15.82 1
(0.621 - 0.623) 17.38 - 17.42
pressures above 210 bar (3000
(0.685 - 0.686) psi).
18.95 - 18.99
(0.746 - 0.748)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-107
PTS1-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 2 and 3 while between port 3 and port 4 sleeve and spool for low
blocking port 4 until sufficient while blocking port 2. During internal leakage.
pressure has been applied to the cross-over transition,
port 1 and the spring bias is all ports are blocked. The
overcome. spring chamber for this
1 2 4 valve is externally vented to
atmosphere.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage 164 cc/min (10 in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
4 160 - 11,0 bar (160 psi)
Pilot displacement volume 1,97 cm3 (0.12 in3)
Cavity C-16-4
3 Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
2
Weight cartridge only 0,5 kg (1.12 lbs)
Seal kit 889634 (Buna-N), 889638 (Viton®)
Viton is a registered trademark of E.I. DuPont
1
60 3 4
or
50 3
to 3
40 4
rt
30 Po 2
20
1
10
0 0
0 5 10 15 20 25 30 35
Flow - USgpm (105 SUS oil @ 1200F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-108 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS1-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
28.6
38,1 (1.5) Hex (1.13)
28.4
28,6 (1.12)
(1.12)
4 57
114.3 3 (2.24)
85.6 (4.50)
1.312”-14 Thd (3.37) 2
139.7 2 Slots
(5.50) 8.74
(0.344)
4 1
31.8
(1.25) 10.3 93.68 31.8
(0.41) (3.688) (1.25)
63.5 114.3
101,6 3 (2.500)
(4.0)
(4.50)
1
Ø 25,38 (0.999)
Ø 26,95 (1.061)
Ø 28,55 (1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-109
PTS11-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 2 and 3 while between port 3 and port 4 sleeve and spool for low
blocking port 4 until sufficient while blocking port 2. During internal leakage. Working
pressure has been applied to the cross-over transition, pressure 350 bar.
port 1 and the spring bias is all ports are blocked. The
overcome. spring chamber for this
1 2 4 valve is externally vented to
atmosphere.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage 250 cc/min (15in3/min) @ 350 bar (5000 psi)
Temperature range -40°to 120°C(-40° to 248°F)
Pilot pressures 80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 1,97 cm3 (0.12 in3)
Cavity C-l6-4
4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum, Steel
3 Weight cartridge only 0.5 kg (1.12 lbs)
Seal kit 889634 (Buna-N), 889638 (Viton®)
Viton is a registered trademark of E.I. DuPont
removed.
or
50
3
to
40 3
4
rt
Po
30
2
20
10 1
0 0
0 1 2 3 4 5 6 7 8
Flow - USgpm (105 SUS oil @ 1200F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-110 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS11-16 Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
2 Warning
Aluminum housings can be
used for pressures up to 210 bar
(3000 psi). Steel housings must
1
25.33 - 25.37
be used for operating pressures
26.90 - 26.94 (0.997 - 0.999) above 210 bar (3000 psi).
(1.059 - 1.061) 28.50 - 28.54
(1.122 - 1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-111
PTS11-20 - Pilot to shift valve
Pilot operated, directional control valve
265 L/min (70 USgpm) • 210 bar (3000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 2 and 3 while between port 3 and port 4 sleeve and spool for low
blocking port 4 until sufficient while blocking port 2. During internal leakage.
pressure has been applied to the cross-over transition,
port 1 and the spring bias is all ports are blocked. The
overcome. spring chamber for this
1 2 4 valve is externally vented to
atmosphere.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 265 L/min (70 USgpm)
Internal leakage 164 cc/min (10 in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
4
Pilot displacement volume 6,72 cm3 (0.41 in3)
Cavity C-20-4
Fluids All general purpose hydraulic fluids such as:
3 MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
2 Weight cartridge only 1,1 kg (2.40 lbs)
Seal kit 565916 (Buna-N), 889646 (Viton®)
Viton is a registered trademark of E.I. DuPont
to
Pressure Drop - psi
60
or3 4
50 3
to
4 3
40 rt
Po
30 2
20
1
10
0
0 10 20 30 40 50 60 70
Flow - USgpm (105 SUS oil @ 1200F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-112 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS1-20 - Pilot to shift valve
Pilot operated, directional control valve
265 L/min (70 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
1
17.38 - 17.42
(0.684 - 0.686)
.78 - 15.82
621 - 0.623) 18.95 - 18.99
(0.746 - 0.748)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-113
PTS12-10 - Pilot to shift valve
Pilot operated, directional control valve
30 L/min (8 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 2 and 3 while between port 3 and port 4 sleeve and spool for low
blocking port 4 until sufficient while blocking port 2. During internal leakage. Working
pressure has been applied to the cross-over transition, all pressure 350 bar.
port 1 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
1 2 4 externally vented to port 4.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 30 L/min (8 USgpm)
Internal leakage 250 cc/min (15in3/min) @ 350 bar (5000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 0,49 cm3 (0.02 in3)
Cavity C-l0-4
Fluids All general purpose hydraulic fluids such as:
4 MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum, Steel
Weight cartridge only 0,14 kg (0.32 lbs)
3
Seal kit 889625 (Buna-N), 566080 (Viton®)
Viton is a registered trademark of E.I. DuPont
removed. 50
3
to
3
4
40
rt
Po
30 2
20
1
10
0 0
0 1 2 3 4 5 6 7 8
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-114 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS12-10 - Pilot to shift valve
Pilot operated, directional control valve
30 L/min (8 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
62
(2.44)
2 Warning
Aluminum housings can be
used for pressures up to 210 bar
1
17.38 - 17.42 (3000 psi). Steel housings must
(0.684 - 0.686) be used for operating pressures
15.78 - 15.82
(0.621 - 0.623) above 210 bar (3000 psi).
18.95 - 18.99
(0.746 - 0.748)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-115
PTS12-12 - Pilot to shift valve
Pilot operated, directional control valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 2 and 3 while between port 3 and port 4 sleeve and spool for low
blocking port 4 until sufficient while blocking port 2. During internal leakage. Working
pressure has been applied to the cross-over transition, all pressure 350 bar.
port 1 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
1 2 4 vented to port 4.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 114 L/min (30 USgpm)
Internal leakage 250 cc/min (15in3/min) @ 350 bar (5000 psi)
Temperature range -40°to 120°C(-40° to 248°F)
Pilot pressures 80 - 5,5 bar (80 psi)
120 - 8,3 bar (120 psi)
*Only for adjustable types 160 - 11,0 bar (160 psi)*
Pilot displacement volume 0,49 cm3 (0.02 in3)
Cavity C-l2-4
Fluids All general purpose hydraulic fluids such as:
4 MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum, Steel
Weight cartridge only 0.32 kg (0.70 lbs)
3 Seal kit 02-160979 (Buna-N), 02-160980 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
Pressure drop curves
Cartridge only
A - P3 to P2
Flow-L/min (21,8 cSt Oil @49 C)
0
B - P3 to P4
1
25 50 75 100
180
Description
160
This is a 3-way 2 position,
high pressure pilot operated, 140
10
directional control valve ideal
A
for selecting a function when 120
the pilot pressure is applied or
Pressure Drop-bar
B
Pressure Drop-psi
removed. 100
80
5
60
40
20
0
0 5 10 15 20 25 30
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-116 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS12-12 - Pilot to shift valve
Pilot operated, directional control valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
Ø 18.9
(0.75) Hex 76.2
“S” Adjustment (3.00)
28.7
79.36 76.17 (1.31)
(3.124) (2.999)
4
74.4 101.6 3
(2.931) (4.00)
1.25 Hex 2 51.6
127.0 (2.031)
1.0625-12 (5.00)
UN-2A “F” Adjustment 1
31.8 31.8
(1.25) 10.3 78.6 (1.25)
(0.406) (3.094) 63.5
33.02
91.69 (1.300) 88.9 (2.50)
(3.610) (3.50)
Warning
20.57 (0.81) Aluminum housings can be
22.15 (0.872) used for pressures up to 210 bar
23.75 (0.935)
(3000 psi). Steel housings must
be used for operating pressures
above 210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-117
PTS2-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 2 and 3 while between port 3 and port 4 sleeve and spool for low
blocking port 4 until sufficient while blocking port 2. During internal leakage.
pressure has been applied to the cross-over transition, all
port 1 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
1 2 4 vented to port 4.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage 164 cc/min (10 in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
4 80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 1,97 cm3 (0.12 in3)
3 Cavity C-16-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
2 Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum, Steel
Weight cartridge only 0,5 kg (1.12 lbs)
Seal kit 889634 (Buna-N), 889638 (Viton®)
1
Viton is a registered trademark of E.I. DuPont
2
Pressure Drop - psi
70
to
60 3
or 4
50 3
to
4 3
40
o rt
P
30 2
20
1
10
0 0
0 5 10 15 20 25 30 35
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-118 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS2-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
16 - 16 size 0 Cartridge
A12T SAE 12 566411 – –
6 Special features
3 Seal material A6B 3/4” BSPP 02-175468 – – 00 - None
(Only required if valve has special
Blank - Buna-N A10H SAE 10 – 876729 –
V- Viton A12H SAE 12 – 876731 –
features, omitted if ”00”.) D
A4G 1/2” BSPP – 876728 –
A6G 3/4” BSPP – 876730 –
S4G 1/2” BSPP – – 02-175143
S6G 3/4” BSPP – – 02-175144
S10T SAE 10 – – 02-175141
S12T SAE 12 – – 02-175142
See section J for housing details.
1
Ø 25,38 (0.999)
Ø 26,95 (1.061)
Ø 28,55 (1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-119
PTS12-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 2 and 3 while between port 3 and port 4 sleeve and spool for low
blocking port 4 until sufficient while blocking port 2. During internal leakage. Working
pressure has been applied to the cross-over transition, all pressure 350 bar.
port 1 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
1 2 4
vented to port 4.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage 550 cc/min (34 in3/min) @ 350 bar (5000 psi)
Temperature range -40° to 120° C(-40° to 248°F)
Pilot pressures 80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 1,97 cm3 (0.12 in3)
Cavity C-l6-4
4 Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum, Steel
Weight cartridge only 0,5 kg (1.12 lbs)
3 Seal kit 889634 (Buna-N), 889638 (Viton®)
Viton is a registered trademark of E.I. DuPont.
70
for selecting a function when to
the pilot pressure is applied or 60
or3 4
removed. 50 3
to
4 3
40 rt
Po
30 2
20
1
10
0 0
0 5 10 15 20 25 30 35
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-120 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS12-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
2 Warning
Aluminum housings can be
used for pressures up to 210 bar
(3000 psi). Steel housings must
1 be used for operating pressures
25.33 - 25.37 above 210 bar (3000 psi).
26.90 - 26.94 (0.997 - 0.999)
(1.059 - 1.061) 28.5- 28.54
(1.122 - 1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-121
PTS2-20 - Pilot to shift valve
Pilot operated, directional control valve
265 L/min (70 USgpm) • 210 bar (3000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 2 and 3 while between port 3 and port 4 sleeve and spool for low
blocking port 4 until sufficient while blocking port 2. During internal leakage.
pressure has been applied to the cross-over transition, all
port 1 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
1 2 4 vented to port 4.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 265 L/min (70 USgpm)
Internal leakage 164 cc/min (10 in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
Pilot displacement volume 6,72 cm3 (0.41 in3)
4 Cavity C-20-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
3 Filtration Cleanliness code 18/16/13
Standard housing material Aluminum
Weight cartridge only 0,5 kg (1.12 lbs)
Seal kit 565916 (Buna-N), 889646 (Viton®)
2
Viton is a registered trademark of E.I. DuPont.
70 5
Pressure Drop - psi
2
to
60
3
4
or
50
3
to
3
4
40
rt
Po
30 2
20
10 1
0 0
0 10 20 30 40 50 60 70
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-122 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS2-20 - Pilot to shift valve
Pilot operated, directional control valve
265 L/min (70 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
1
Ø 31,70 (1.248)
Ø 33,30 (1.311)
Ø 36,47 (1.436)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-123
PTS13-10 - Pilot to shift valve
Pilot operated, directional control valve
30 L/min (8 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 3 and 4 while between port 2 and port 3 sleeve and spool for low
blocking port 2 until sufficient while blocking port 4. During internal leakage. Working
pressure has been applied to the cross-over transition, all pressure 350 bar.
port 1 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
1 2 4 vented to port 4.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 30 L/min (8 USgpm)
Internal leakage 210 cc/min (13in3/min) @ 350 bar (5000 psi)
Temperature range -40° to 120° C(-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 0,49 cm3 (0.02 in3)
4 Cavity C-l0-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
3 Standard housing materials Aluminum or Steel
Weight cartridge only 0,14 kg (0.32 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton®)
2 Viton is a registered trademark of E.I. DuPont
removed. 60 4
3
or
50
3
to
3
4
40
rt
Po
30 2
20
1
10
0 0
0 1 2 3 4 5 6 7 8
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-124 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS13-10 - Pilot to shift valve
Pilot operated, directional control valve
30 L/min (8 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
62
(2.44)
3
2 Warning
Aluminum housings can be
used for pressures up to 210 bar
(3000 psi). Steel housings must
1 15.78 - 15.82
be used for operating pressures
(0.621 - 0.623) above 210 bar (3000 psi).
17.38 - 17.42
(0.684 - 0.686) 18.95 - 18.99
(0.746 - 0.748)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-125
PTS13-12 - Pilot to shift valve
Pilot operated, directional control valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 3 and 4 while between port 2 and port 3 sleeve and spool for low
blocking port 2 until sufficient while blocking port 4. During internal leakage. Working
pressure has been applied to the cross-over transition, all pressure 350 bar.
port 1 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
1 2 4 vented to port 4.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 113 L/min (30 USgpm)
Internal leakage 210 cc/min (13in3/min) @ 350 bar (5000 psi)
Temperature range -40° to 120° C(-40° to 248°F)
Pilot pressures 80 - 5,5 bar (80 psi)
120 - 8,3 bar (120 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 0,49 cm3 (0.02 in3)
Cavity C-l2-4
2
Pressure drop curves
Cartridge only
Flow-L/min (21,8 cSt Oil @490C)
25 50 75 100
Description 180
B
Pressure Drop-psi
100
80
5
60
40
20
0
0 5 10 15 20 25 30
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-126 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS13-12 - Pilot to shift valve
Pilot operated, directional control valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
Ø 18.9
(0.75) Hex 76.2
“S” Adjustment (3.00)
28.7
79.36 76.17 (1.31)
(3.124) (2.999)
4
45.7 101.6 3
(1.62) (4.00)
1.25 Hex 2 51.6
127.0 (2.031)
1.0625-12 (5.00)
UN-2A “F” Adjustment 1
31.8 31.8
(1.25) 10.3 78.6 (1.25)
(0.406) (3.094) 63.5
33.02
91.69 (1.300) 88.9 (2.50)
(3.610) (3.50)
Warning
Aluminum housings can be
used for pressures up to 210 bar
(3000 psi). Steel housings must
20.57 (0.81)
be used for operating pressures
22.15 (0.872) above 210 bar (3000 psi).
23.75 (0.935)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-127
PTS3-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 3 and 4 while between port 2 and port 3 sleeve and spool for low
blocking port 2 until sufficient while blocking port 4. During internal leakage.
pressure has been applied to the cross-over transition, all
port 1 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
1 2 4 vented to port 4.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage 164 cc/min (10 in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
4
Pilot displacement volume 1,97 cm3 (0.12 in3)
Cavity C-16-4
Fluids All general purpose hydraulic fluids such as:
3 MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
2 Weight cartridge only 0,5 kg (1.12 lbs)
Seal kit 889634 (Buna-N), 889638 (Viton®)
Viton is a registered trademark of E.I. DuPont
to
60
3
4
or
50
3
to
3
40
4
rt
Po
30 2
20
1
10
0 0
0 5 10 15 20 25 30 35
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-128 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS3-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
16 - 16 size 0 Cartridge
A12T SAE 12 566411 – – 6 Special features
3 Seal material A6B 3/4" BSPP 02-175468 – – 00 - None
A10H SAE 10 – 876729 – (Only required if valve has special
Blank - Buna-N
V- Viton® A12H SAE 12 – 876731 –
features, omitted if “00”.) D
A4G 1/2" BSPP – 876728 –
A6G 3/4" BSPP – 876730 –
See section J for housing details.
Warning
Aluminum housings can be
used for pressures up to 210
1 bar (3000 psi). Steel housings
Ø 25,38 ( 0.999) must be used for operating
pressures above 210 bar
Ø 26,95 ( 1.061)
(3000 psi).
Ø 28,55 ( 1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-129
PTS13-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 3 and 4 while between port 2 and port 3 sleeve and spool for low
blocking port 2 until sufficient while blocking port 4. During internal leakage. Working
pressure has been applied to the cross-over transition, all pressure 350 bar.
port 1 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
1 2 4 vented to port 4.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage 210 cc/min (13in3/min) @ 350 bar (5000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 1,97 cm3 (0.12 in3)
Cavity C-l6-4
4 Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
3 Weight cartridge only 0,5 kg (1.12 lbs)
Seal kit 889634 (Buna-N), 889638 (Viton®)
Viton is a registered trademark of E.I. DuPont
60
3
removed. 4
or
50
3
to
3
40
4
rt
Po
30 2
20
1
10
0 0
0 5 10 15 20 25 30 35
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-130 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS13-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
101.6 3
[4.00]
2
Warning
Aluminum housings can be
used for pressures up to 210 bar
1 (3000 psi). Steel housings must
25.33-25.37 be used for operating pressures
[0.997-0.999] 28.50-28.54 above 210 bar (3000 psi).
[1.122-1.124]
28.50-28.54
[1.122-1.124]
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-131
PTS3-20 - Pilot to shift valve
Pilot operated, directional control valve
265 L/min (70 USgpm) • 210 bar (3000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 3 and 4 while between port 2 and port 3 sleeve and spool for low
blocking port 2 until sufficient while blocking port 4. During internal leakage.
pressure has been applied to the cross-over transition, all
port 1 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
1 2 4 vented to port 4.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 265 L/min (70 USgpm)
Internal leakage 164 cc/min (10 in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
4
Pilot displacement volume 6,72 cm3 (0.41 in3)
Cavity C-20-4
Fluids All general purpose hydraulic fluids such as:
3 MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing material Aluminum
2 Weight cartridge only 0,5 kg (1.12 lbs)
Seal kit 565916 (Buna-N), 889646 (Viton®)
Viton is a registered trademark of E.I. DuPont
to
3
60
4
or
3
50
to
3
4
40
rt
Po
30 2
20
10 1
0 0
0 10 20 30 40 50 60 70
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-132 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS3-20 - Pilot to shift valve
Pilot operated, directional control valve
265 L/min (70 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
41.2
47,6 (1.875) Hex (1.62)
41,3 36
(1.62) (1.42)
4
117.8 158.8 3
1.625"-12 Thd. (4.64) (6.25) 2 Slots
177.8 2 76.5
(7.00) 8.74 (3.01)
1 (0.344)
41.3
4 10.3 41.3
(1.63) 106.38
(0.41) 127 (1.63)
139,7 82.55 (4.188)
(3.250) (5.00)
(5.50)
3
1
Ø 31,70 (1.248)
Ø 33,30 (1.311)
Ø 36,47 (1.436)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-133
PTS14-12 - Pilot to shift valve
Pilot operated, directional control valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 3 and 4 while between port 2 and port 3 sleeve and spool for low
blocking port 2 until sufficient while blocking port 4. During internal leakage. Working
pressure has been applied to the cross-over transition, pressure 350 bar.
port 1 and the spring bias is all ports are blocked. The
overcome. spring chamber for this
1 2 4 valve is externally vented to
atmosphere.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 114 L/min (30 USgpm)
Internal leakage 210 cc/min (13in3/min) @ 350 bar (5000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 80 - 5,5 bar (80 psi)
120 - 8,3 bar (120 psi)
Pilot displacement volume 1,97 cm3 (0.12 in3)
Cavity C-l2-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
4
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
Weight cartridge only 0.32 kg (0.70 lbs)
3 Seal kit 02-160979 (Buna-N), 02-160980 (Viton®)
Viton is a registered trademark of E.I. DuPont
2
Pressure drop curves
Cartridge only
25 50 75 100
180
Description A - P3 to P2
This is a 3-way 2 position, 160
B - P3 to P4
high pressure pilot operated, 10
directional control valve ideal 140
for selecting a function when A
the pilot pressure is applied or 120
Pressure Drop-bar
B
Pressure Drop-psi
removed.
100
80
5
60
40
20
0
0 5 10 15 20 25 30
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-134 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS14-12 - Pilot to shift valve
Pilot operated, directional control valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
35.1
28.7 (1.38)
35.05 (1.31)
(1.380)
1.25 Hex 4
74.4 101.6 3
(2.931) (4.00)
1.0625-12 UN-2A 2 51.6
127.0 (2.031)
(5.00)
1
31.8 31.8
4 78.6 (1.25)
91.69 (1.25) 10.3
(0.406) (3.094) 63.5
(3.610)
88.9 (2.50)
(3.50)
3
2 Warning
Aluminum housings can
be used for pressures up to
1 210 bar (3000 psi). Steel
20.57
housings must be used for
22.15 (0.810)
operating pressures above
(0.72) 23.75 210 bar (3000 psi).
(0.935)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-135
PTS14-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 3 and 4 while between port 2 and port 3 sleeve and spool for low
blocking port 2 until sufficient while blocking port 4. During internal leakage. Working
pressure has been applied to the cross-over transition, pressure 350 bar.
port 1 and the spring bias is all ports are blocked. The
overcome. spring chamber for this
1 2 4 valve is externally vented to
atmosphere.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage 210 cc/min (13in3/min) @ 350 bar (5000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 1,97 cm3 (0.12 in3)
Cavity C-l6-4
4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
3
Weight cartridge only 0,5 kg (1.12 lbs)
Seal kit 889634 (Buna-N), 889638 (Viton®)
Viton is a registered trademark of E.I. DuPont.
removed. to
60
or3 4
50 3
to 3
40 4
rt
30 Po
2
20
1
10
0 0
0 5 10 15 20 25 30 35
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-136 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS14-16 - Pilot to Shift Valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
2 Warning
Aluminum housings can be
used for pressures up to 210 bar
(3000 psi). Steel housings must
1 25.33 - 25.37 be used for operating pressures
(0.997 - 0.999) above 210 bar (3000 psi).
26.90 - 26.94
(1.059 - 1.061) 28.50 - 28.54
(1.122 - 1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-137
PTS5-10 - Pilot to shift valve
Pilot operated, directional control valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
2 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 1 and 2 while between port 2 and port 3 sleeve and spool for low
blocking port 3 until sufficient while blocking port 1. During internal leakage.
pressure has been applied to the cross-over transition, all
port 4 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
4 3 1 vented to port 1.
80
Pressure Drop - psi
5
60
B 4
40 3
2
20
1
0 0
0 1 2 3
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to 2
B - Port 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-138 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS5-10 - Pilot to shift valve
Pilot operated, directional control valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
Aluminum Aluminum
2 Size light duty fatigue rated 6 Special features
10 - 10 size 0 Cartridge only 00 - None
3B 3/8" BSPP 02-173358 (Only required if valve has special
3 Seal material 6T SAE 6 566162 features, omitted if “00”.)
4 33.4
(1.31)
1
24,6 2X7,14 25,6
(0.97) 9,5 57,15
50 (2.250) (0.281) (1.00)
(0.38)
0.875"-14 Thd. (1.97) 75.4
(2.97)
46,0 3
(1.81)
1
Ø 15,80 (0.622)
Ø 17,40 (0.685)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-139
PTS15-12 - Pilot to shift valve
Pilot operated, directional control valve
105 L/min (27.7 USgpm) • 350 bar (5000 psi)
Features
2 Hardened, ground and honed
Operation sleeve and spool for low
This valve allows flow At this time, flow is directed internal leakage. Working
between ports 1 and 2 while between port 2 and port 3 pressure 350 bar.
blocking port 3 until sufficient while blocking port 1. During
pressure has been applied to the cross-over transition, all
port 4 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
4 3 1 vented to port 1.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
D Rated flow 105 L/min (28 USgpm)
Internal leakage 210 cc/min (13 in3/min) maximum @ 350 bar (5000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 2.76 bar (40 psi)
Pilot displacement volume 0,49 cm3 (0.02 in3)
Cavity C-12-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
3 Filtration Cleanliness code 18/16/13
Standard housing material Aluminum, Steel
Weight cartridge only 0,21 kg (0.55 lbs)
2 Seal kit 9900171 (Buna-N), 9900172 (Viton®)
Viton is a registered trademark of E.I. DuPont
1
Pressure drop curves A - Port 3 to 2
Description Cartridge only B - Port 2 to 1
This is a 3-way 2 position,
Flow-L/min (21,8 cSt Oil @ 490C)
high pressure, remotely pilot
operated directional control
valve ideal for selecting 25 50 75 100
a function when the pilot 180
pressure is applied or lost.
160
A
10
140
120
Pressure Drop-psi
Pressure Drop-bar
100
80
B 5
60
40
20
0
0 5 10 15 20 25 30
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-140 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS15-12 - Pilot to Shift Valve
Pilot operated, directional control valve
105 L/min (27.7 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
Aluminum Steel
2 Size 6 Special features
12 - 12 size 0 Cartridge 00 - None
A4G 1/2" BSPP 02-161817 (Only required if valve has special
3 Seal material A6G 3/4" BSPP 02-161816 features, omitted if “00”.)
34.29
[1.350] 2 51.6
31.75 HEX. 88.9 (2.03)
[1.25] 28.7 3 (3.50)
(1.13) 101.6
2 X Ø10.31 (4.00)
(0.406) 1
1 1/16-12 UN-2A THD.
25.4 12.7 63.50 25.4
(1.00) (0.50) (2.50) (1.00)
88.9
(3.50)
38.48
[2.696]
3
2
Warning
Aluminum housings can be
used for pressures up to 210 bar
(3000 psi). Steel housings must
1 be used for operating pressures
∅ 22.15-22.19 above 210 bar (3000 psi).
[0.872- 0.874]
∅ 23.73-23.77
[0.934- 0.936]
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-141
PTS5-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 3 and 4 while between port 2 and port 3 sleeve and spool for low
blocking port 2 until sufficient while blocking port 4. During internal leakage.
pressure has been applied to the cross-over transition,
port 1 and the spring bias is all ports are open. The
overcome. spring chamber for this
1 2 4 valve is externally vented to
atmosphere.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage 164 cc/min (10 in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
4 160 - 11,0 bar (160 psi)
Pilot displacement volume 1,97 cm3 (0.12 in3)
Cavity C-16-4
3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
2 Standard housing materials Aluminum
Weight cartridge only 0,5 kg (1.12 lbs)
Seal kit 889634 (Buna-N), 889638 (Viton®)
Viton is a registered trademark of E.I. DuPont.
2
Pressure Drop - psi
60 to
3 4
or
50 3
to 3
40 4
o rt
30 P 2
20
1
10
0 0
0 5 10 15 20 25 30 35
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-142 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS5-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
16 - 16 size 0 Cartridge
A12T SAE 12 566411 – –
6 Special features
3 Seal material A6B 3/4" BSPP 02-175468 – – 00 - None
(Only required if valve has special
Blank - Buna-N A10H SAE 10 – 876729 –
V- Viton® A12H SAE 12 – 876731 –
features, omitted if “00”.) D
A4G 1/2" BSPP – 876728 –
A6G 3/4" BSPP – 876730 –
See section J for housing details.
28.6
38,1 (1.5) Hex (1.13)
28,6 28.4
(1.12)
(1.12)
4 57
114.3 3 (2.24)
85.6 (4.50)
1.312”-14 Thd. (3.37) 2
139.7 2 Slots
(5.50) 8.74
(0.344)
4 1
31.8 10.3
(1.25) 93.68 31.8
(0.41) (3.688) (1.25)
101,6 63.5 114.3
(4.00) (2.500)
3 (4.50)
1
Ø 25,38 (0.999)
Ø 26,95 (1.061)
Ø 28,55 (1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-143
PTS15-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 3 and 4 while between port 2 and port 3 sleeve and spool for low
blocking port 2 until sufficient while blocking port 4. During internal leakage. Working
pressure has been applied to the cross-over transition, pressure 350 bar.
port 1 and the spring bias is all ports are open. The
overcome. spring chamber for this
1 2 4 valve is externally vented to
atmosphere.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage 210 cc/min (13in3/min) @ 350 bar (5000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 1,97 cm3 (0.12 in3)
Cavity C-l6-4
4 Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
3 Weight cartridge only 0.5 kg (1.12 lbs)
Seal kit 889634 (Buna-N), 889638 (Viton®)
Viton is a registered trademark of E.I. DuPont.
2
Pressure Drop - psi
removed.
60 to
3 4
or
50 3
to 3
40 4
o rt
30 P 2
20
1
10
0 0
0 5 10 15 20 25 30 35
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-144 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS15-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
36.6
(1.44)
1 1/2” Hex 54.0 25.4
36.6
(2.12) (1.00)
(1.44)
4
120.7 82.5
1 5/16”-12 UNF-2A THD. 3 (3.25)
(4.75)
139.7 2
(5.50) 2 X Ø 10.31
1 (0.406)
4
25.4
(1.00) 12.7 76.2 25.4
(0.50) (3.000) (1.00)
50.8 101.6
101.6 (2.00) (4.00)
(4.00)
3
2
Warning
Aluminum housings can be
used for pressures up to 210 bar
(3000 psi). Steel housings must
1 25.33 - 25.37 be used for operating pressures
(0.997 - 0.999) above 210 bar (3000 psi).
28.50 - 28.54
(1.122 - 1.124)
26.90 - 28.54
(1.059 - 1.061)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-145
PTS6-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 3 and 4 while between port 2 and port 3 sleeve and spool for low
blocking port 2 until sufficient while blocking port 4. During internal leakage.
pressure has been applied to the cross-over transition, all
port 1 and the spring bias is ports are open. The spring
overcome. chamber for this valve is
1 2 4 vented to port 4.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage 164 cc/min (10 in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
4
Pilot displacement volume 1,97 cm3 (0.12 in3)
Cavity C-16-4
Fluids All general purpose hydraulic fluids such as:
3 MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
2 Weight cartridge only 0,5 kg (1.12 lbs)
Seal kit 889634 (Buna-N), 889638 (Viton®)
Viton is a registered trademark of E.I. DuPont
1
Description Pressure drop curves
This is a 3-way 2 position, Cartridge only
pilot operated directional
control valve ideal for
selecting a function when the Flow - L/min (21,8 cSt oil @ 49°C)
pilot pressure is applied or
removed. 0 20 40 60 80 100 110
6
80
70 2 5
Pressure Drop - bar
Pressure Drop - psi
to
60 3
or 4
50 3
to 3
40 4
o rt
30 P
2
20
1
10
0 0
0 5 10 15 20 25 30 35
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-146 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS6-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
16 - 16 size 0 Cartridge
A12T SAE 12 566411 – –
6 Special features
00 - None
3 Seal material A6B 3/4" BSPP 02-175468 – –
(Only required if valve has special
D
Blank - Buna-N A10H SAE 10 – 876729 –
features, omitted if “00”.)
V- Viton® A12H SAE 12 – 876731 –
A4G 1/2" BSPP – 876728 –
A6G 3/4" BSPP – 876730 –
See section J for housing details.
28.6
(1.13)
28.4
(1.12)
28,6
38,1 (1 .50) He x
(1.12) 4 57
114.3 3 (2.24)
85.6 (4.50)
(3.37) 2 2 Slots
1.312"-12 Thd. 139.7
(5.50) 8.74
(0.344)
1
4 31.8
(1.25) 10.3 93.68 31.8
(0.41) (3.688) (1.25)
63.5 114.3
101,6 (2.500)
(4.50)
(4.00)
3
1
Ø 25,38 ( 0.999)
Ø 26,95 ( 1.061)
Ø 28,55 ( 1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-147
PTS16-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
3 Operation Features
This valve allows flow At this time, flow is directed Hardened, ground and honed
between ports 3 and 4 while between port 2 and port 3 sleeve and spool for low
blocking port 2 until sufficient while blocking port 4. During internal leakage. Working
pressure has been applied to the cross-over transition, all pressure 350 bar.
port 1 and the spring bias is ports are open. The spring
overcome. chamber for this valve is
1 2 4 vented to port 4.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage 210 cc/min (13in3/min) @ 350 bar (5000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressures 80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 1,97 cm3 (0.12 in3)
Cavity C-l6-4
4 Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
3 Weight cartridge only 0,5 kg (1.12 lbs)
Seal kit 889634 (Buna-N), 889638 (Viton®)
Viton is a registered trademark of E.I. DuPont.
1
Pressure drop curves
Cartridge only
removed. to
60 3
or 4
50 3
to 3
40 4
rt
30 Po
2
20
1
10
0 0
0 5 10 15 20 25 30 35
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-148 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS16-16 - Pilot to shift valve
Pilot operated, directional control valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
36.6
(1.44) 31.8
54.0 (1.25)
25.4
(2.12) (1.00)
(1.44)
(4.75) (3.25)
139.7 2
(5.50) 2 X Ø 10.31
1 (0.406)
25.4
(1.00) 12.7 76.2 25.4
(0.50) (3.000) (1.00)
50.8 101.6
(2.00) (4.00)
101.6
(4.00)
Warning
Aluminum housings can be
1 25.33 - 25.37
(0.997 - 0.999)
used for pressures up to 210 bar
26.90 - 26.94 (3000 psi). Steel housings must
(1.059-1.061) 28.50 - 28.54
(1.122 - 1.124)
be used for operating pressures
above 210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-149
PTS9-8 - Pilot to shift valve
Pilot operated, directional control valve
19 L/min (5 USgpm) • 280 bar (4000 psi)
3 Operation Features
This valve allows flow At that time flow is directed Hardened, ground and honed
between ports 3 and 4 while between ports 3 and 2 while sleeve and spool for low
blocking port 2 until sufficient blocking port 4. During the internal leakage.
pressure has been applied to cross-over transition, all ports
port 1 and the spring bias is are open. The spring chamber
overcome. for this valve is vented to port 5.
1 2 4 5
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 280 bar (4000 psi)
Cartridge fatigue pressure (infinite life) 280 bar (4000 psi)
Rated flow 19 L/min (5 USgpm)
Transition All ports open
Internal leakage, port 2 to port 1 164 cc/min (10 in /min) @ 210 bar (3000 psi)
3
valve.
120
80
B
A
40
0
0.0 1.0 2.0 3.0 4.0 5.0
Flow - USgpm (105 SUS Oil @ 120˚)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-150 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS9-8 - Pilot to shift valve
Pilot operated, directional control valve
19 L/min (5 USgpm) • 280 bar (4000 psi)
1 2 3 4 5 6 7
Dimensions
mm (inch)
Cartridge only
7/8" Hex
0.752
(19.1)
3/4" - 16 Thread
2.569 4
(65.25)
1
0.435
0.497 (11.05)
(12.62) Warning
0.559
(14.2) Aluminum housings can be used
0.622
(15.8) for pressures up to 210 bar
(3000 psi). Steel housings must
be used for operating pressures
above 210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-151
PTS9-10 - Pilot to shift valve
Pilot operated, directional control valve
38 L/min (10 USgpm) • 280 bar (4000 psi)
3 Operation Features
This valve allows flow At that time flow is directed Hardened, ground and honed
between ports 3 and 4 while between ports 3 and 2 while sleeve and spool for low
blocking port 2 until sufficient blocking port 4. During the internal leakage.
pressure has been applied to cross-over transition, all ports
port 1 and the spring bias is are open. The spring chamber
overcome. for this valve is vented to port 5.
1 2 4 5
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 280 bar (4000 psi)
Cartridge fatigue pressure (infinite life) 280 bar (4000 psi)
Rated flow 38 L/min (10 USgpm)
Transition All ports open
5
Internal leakage, port 2 to port 1 164 cc/min (10 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
4
Cavity C-10-5S
Fluids All general purpose hydraulic fluids such as:
3 MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
2
200
100
Port 3 to Port 2
0
0 2 4 6 8 10
Flow USgpm (105 SUS Oil @ 120˚F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-152 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS9-10 - Pilot to Shift Valve
Pilot operated, directional control valve
38 L/min (10 USgpm) • 280 bar (4000 psi)
1 2 3 4 5 6 7
8 - C-10-5S cavity Port 1, 2 & 4 Port 1 & 5 Aluminum Steel 7 Special features
6T SAE 6 SAE 4 5994133-001 5994134-001 00 - None
3 Seal material 8T SAE 8 SAE 4 5994133-002 5994134-002 (Only required if valve has special
Blank - Buna-N features, omitted if “00”.)
V -Viton®
4G 1/2" BSPP 1/4" BSPP 5994133-003 5994134-003 D
See section J for housing details.
4 Body
0 - Cartridge only
Dimensions
mm (inch)
Cartridge only
1" Hex
0.813
(20.65)
7/8" - 14 Thread
3.069
(77.95) 4
1
0.559
(14.2)
0.622
(15.8)
0.685
(17.4) 0.747
(18.97)
Warning
Aluminum housings can
be used for pressures up
to 210 bar (3000 psi). Steel
housings must be used for
operating pressures above 210
bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-153
PTS9-12 - Pilot to shift valve
Pilot operated, directional control valve
76 L/min (20 USgpm) • 280 bar (4000 psi)
3 Operation Features
This valve allows flow At that time flow is directed Hardened, ground and honed
between ports 3 and 4 while between ports 3 and 2 while sleeve and spool for low
blocking port 2 until sufficient blocking port 4. During the internal leakage.
pressure has been applied to cross-over transition, all ports
port 1 and the spring bias is are open. The spring chamber
overcome. for this valve is vented to port 5.
1 2 4 5
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 280 bar (4000 psi)
Cartridge fatigue pressure (infinite life) 280 bar (4000 psi)
Rated flow 76 L/min (20 USgpm)
Transition All ports open
5 Internal leakage, port 2 to port 1 164 cc/min (10 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
4 Cavity C-12-5S
Fluids All general purpose hydraulic fluids such as:
3 MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing material Aluminum or steel
2 Weight cartridge only 0,36 kg (0.79 lbs)
Seal kit (Urethane) 202914-921
218 15
Pressure drop - psi
)
Pressure drop - bar
r2
4 (o
3 to
145 rt 10
Po
73 5
0
0 5 10 15 20
Flow - USgpm (105 SUS Oil @ 120˚F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-154 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS9-12 - Pilot to shift valve
Pilot operated, directional control valve
76 L/min (20 USgpm) • 280 bar (4000 psi)
1 2 3 4 5 6 7
Cartridge only
1 1/16"-12 UN-2A
86.4 4
(3.40)
3
Warning
Aluminum housings can be
2 used for pressures up to 210 bar
(3000 psi). Steel housings must
be used for operating pressures
above 210 bar (3000 psi).
1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-155
PTS9-16 - Pilot to shift valve
Pilot operated, directional control valve
151 L/min (40 USgpm) • 280 bar (4000 psi)
3 Operation Features
This valve allows flow At that time flow is directed Hardened, ground and honed
between ports 3 and 4 while between ports 3 and 2 while sleeve and spool for low
blocking port 2 until sufficient blocking port 4. During the internal leakage.
pressure has been applied to cross-over transition, all ports
port 1 and the spring bias is are open. The spring chamber
overcome. for this valve is vented to port 5.
1 2 4 5
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 280 bar (4000 psi)
Cartridge fatigue pressure (infinite life) 280 bar (4000 psi)
Rated flow 151 L/min (40 gpm)
5
Transition All ports open
Internal leakage, port 2 to port 1 164 cc/min (10 in3/min) @ 210 bar (3000 psi)
4 Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-16-5S
3 Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
2 Standard housing material Aluminum or steel
Weight cartridge only 0,47 kg (1.05 lbs)
Seal kit (Urethane) 202915-922
1
to
150 3 10
rt
Po
100 7
50 4
0
0 5 10 15 20 25 30 35 40 45
Flow - USgpm (105 SUS oil @ 120˚F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-156 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS9-16 - Pilot to shift valve
Pilot operated, directional control valve
151 L/min (40 USgpm) • 280 bar (4000 psi)
1 2 3 4 5 6 7
Cartridge only
1 5/16"-12 UN-2A
96.3 4
(3.79)
Warning
2 Aluminum housings can be
used for pressures up to 210 bar
(3000 psi). Steel housings must
be used for operating pressures
1 above 210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-157
PTS9-20 - Pilot to shift valve
Pilot operated, directional control valve
230 L/min (60 USgpm) • 280 bar (4000 psi)
3 Operation Features
This valve allows flow At that time flow is directed Hardened, ground and honed
between ports 3 and 4 while between ports 3 and 2 while sleeve and spool for low
blocking port 2 until sufficient blocking port 4. During the internal leakage.
pressure has been applied to cross-over transition, all ports
port 1 and the spring bias is are open. The spring chamber
overcome. for this valve is vented to port 5.
1 2 4 5
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 280 bar (4000 psi)
5 Cartridge fatigue pressure (infinite life) 280 bar (4000 psi)
Rated flow 230 L/min (60 USgpm)
4 Transition All ports open
Internal leakage, port 2 to port 1 164 cc/min (10 in3/min) @ 210 bar (3000 psi)
21
Pressure Drop - Bar
250
200 14
150
100 7
50
0
0 10 20 30 40 50 60 70
Flow - USgpm (150 SUS Oil @ 120˚F)
P to EF
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-158 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS9-20 Pilot to shift valve
Pilot operated, directional control valve
230 L/min (60 USgpm) • 280 bar (4000 psi)
1 2 3 4 5 6 7
Cartridge only
20.3
1 7/8" HEX
(0.80)
1 5/8"-12 UN-2A
4
105,2
(4.14)
2
Warning
Aluminum housings can be
used for pressures up to 210
1 bar (3000 psi). Steel housings
must be used for operating
pressures above 210 bar
(3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-159
DSV4-10 - Shuttle valve
Spring centered, open or closed center spool type shuttle valve
26 L/min (6.9 USgpm) • 350 bar (5000 psi)
3
Operation Features
When the spring bias is When the spring bias is Hardened, ground and honed
overcome at port 2, the flow is overcome at port 4, the flow is working parts to limit leakage
directed from port 4 to port 3 directed form port 2 to port 3 and prolong life. The valve
1 while closing port 2. while closing port 4. This valve should be fitted into a blind
is available in both a closed C-10-4 cavity or a standard
and open center spool body with port 1 plugged.
4 2
configuration. Several switching pressures
3 available. Compact design with
a low Pressure drop.
Performance data
1 Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D 4 2 Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Sectional view Rated flow 26 L/min (6.9 USgpm)
Internal leakage 164 cc/min (10 in3 /min) maximum @ 210 bar (3000 psi)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 0,49 cm3 (0.02 in3)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
4 4 MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
3 3 Standard housing materials Aluminum or steel
Weight cartridge only 0,14 kg (0.32 lbs)
2 2 Seal kit 889597 (Buna-N), 02-172397 (Viton®)
1 1 Viton is a registered trademark of E.I. DuPont.
Closed Open
center center
3
relief valves and purge reliefs. 40
30 2
20
1 Gage port DSV4-**(V)-C valve
10
0 0
0 1.5 3 4.5 6 7
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-160 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
DSV4-10 - Shuttle valve
Spring centered, open or closed center spool type shuttle valve
26 L/min (6.9 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7
Blank - Buna-N D
V- Viton
®
Cartridge only
0.875"-14 Thd.
58,3
(2.29)
3
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-161
DSV4-12 - Shuttle valve
Spring centered, open or closed center spool type shuttle valve
113 L/min (29.9 USgpm) • 350 bar (5000 psi)
3
Operation Features
When the spring bias is When the spring bias is Hardened, ground and honed
overcome at port 2, the flow is overcome at port 4, the flow is working parts to limit leakage
directed from port 4 to port 3 directed form port 2 to port 3 and prolong life. The valve
1 while closing port 2. while closing port 4. This valve should be fitted into a blind
is available in both a closed C-12-4 cavity or a standard
4 2 and open center spool body with port 1 plugged.
configuration. Several switching pressures
3 available. Compact design with
a low Pressure drop.
1
D Performance data
4 2 Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Sectional view Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 113 L/min (29.9 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum
Seal kit (Buna-N), Viton®)
Endurance tested to 1 million cycles at full rated flow and pressure.
4 Viton is a registered trademark of E.I. DuPont.
Description
This is a 3-way 3-position,
Spring centered, open or
closed center spool type
hot oil shuttle valve for
transmission applications. This
is usually built into manifolds
containing other transmission
components such as cross line
relief valves and purge reliefs.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-162 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
DSV4-12 - Shuttle valve
Spring centered, open or closed center spool type shuttle valve
113 L/min (29.9 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7
4 Spool configuration
C - Normally closed
O - Open center
Dimensions
mm (inch)
Cartridge only
1 1/4 HEX
19.8
[.78]
Torque cartridge in housing
A - 47-54 Nm (35-40 ft. lbs)
S - 68-75 Nm (50-55 ft. lbs)
1 1/16 - 12 UN - 2A
91.7
[3.61]
Warning
20.55 - 20.59 Aluminum housings can be used
[.809 - .8111] for pressures up to 210 bar
(3000 psi). Steel housings must
22.13 - 22.17
[.871 - .873] be used for operating pressures
above 210 bar (3000 psi).
23.73 - 23.77
[.934 - .936]
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-163
DSV4-16 - Shuttle valve
Spring centered, open or closed center spool type shuttle valve
190 L/min (50 USgpm) • 350 bar (5000 psi)
D Performance data
Ratings and specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 190 L/min (50 USgpm)
Internal leakage 164 cc/min (10 in3 /min) maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Profile Views
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Cavity C-16-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or steel
Weight cartridge only 0,5 kg (1.12 lbs)
Seal kit 889634 (Buna-N)
889634 (Viton®)
Viton is a registered trademark of E.I. DuPont.
Typical application
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-164 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
DSV4-16 - Shuttle valve
Spring centered, open or closed center spool type shuttle valve
190 L/min (50 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7
Dimensions
mm (inch)
Warning
Aluminum housings can be used
for pressures up to 210 bar (3000
psi). Steel housings must be used
for operating pressures above
210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-165
PTS6-10 - Pilot to shift valve
Remote pilot operated, directional control valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
4 2 Operation Features
This valve allows flow At that time, flow is directed Hardened, ground and honed
between ports 1 and 2 and between ports 1 and 4 and sleeve and spool for low
ports 3 and 4 until sufficient ports 3 and 2. During the internal leakage.
pressure has been applied at cross-over transition, all
port 5 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
5 3 1 vented internally to port 1.
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
D Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 164 cc/min (10 in3/min) maximum @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Pilot pressure 4,2 bar (60 psi)
Pilot displacement volume 0,49 cm3 (0.02 in3)
Cavity C-10-4
4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
3
Standard housing materials Aluminum
Weight cartridge only 0,15 kg (0.33 lbs)
2 Seal kit 889625 (Buna-N), 566080 (Viton®)
Viton is a registered trademark of E.I. DuPont.
60 4
D
3
40
2
20
1
0 0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to 4
B - Port 4 to 1
C - Port 3 to 2
D - Port 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-166 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS6-10 - Pilot to shift valve
Remote pilot operated, directional control valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
Aluminium Aluminium
2 light duty fatigue rated 6
Size Special features
10 - 10 size 0 Cartridge 00 - None
A3B 3/8" BSPP 02-179705 – (Only required if valve has special
A6T SAE 6 566161 – features, omitted if “00”.)
3 Seal material
A2G 1/4" BSPP – 876709
Blank - Buna-N
A3G 3/8" BSPP – 876715
D
V- Viton®
A6H SAE 6 – 876708
A8H SAE 8 – 876713
See section J for housing details.
20.8
33,3 25,4 (1.0) hex (0.82)
(1.31) 4
36.7
(1.44) 76.2 3 52.6
(3.00) (2.07)
88.9 2 7.14
(3.50) (0.281)
0.875"-14 Thd.
1
25.4 9.5 57.15 25.4
(1.00) (2.250) (1.00)
(0.38) 2-Slots
61,9 4 76.2
(2.43) (3.00)
1
Ø 15,80 ( 0.622)
Ø 17,40 ( 0.685)
Ø 18,97 ( 0.747)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-167
PTS16-10 - Pilot to shift valve
Remote pilot operated, directional control valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
4 2 Operation Features
This valve allows flow At that time, flow is directed Hardened, ground and honed
between ports 1 and 2 and between ports 1 and 4 and sleeve and spool for low
ports 3 and 4 until sufficient ports 3 and 2. During the internal leakage. Working
pressure has been applied at cross-over transition, all pressure 350 bar.
port 5 and the spring bias is ports are blocked. The spring
overcome. chamber for this valve is
5 3 1 vented internally to port 1.
0 0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
A - Port 3 to 4
B - Port 4 to 1
C - Port 3 to 2
D - Port 2 to 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-168 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS16-10 - Pilot to shift valve
Remote pilot operated, directional control valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
37.1
25.4 (1.46) 25.4
(1.00) (1.00)
19
(0.75)
37.1 25.4 4
3 50.8
(1.46) (1.0) Hex 76.2 (2.00)
88.9 (3.00) 2
34.9 (3.50)
(1.37) 2 X Ø7.11
1 (0.280)
7/8 - 14 UNF-2A THD 22.2
(0.87) 9.5 57.15 22.2
(2.250) (0.87)
44.45 (0.37) 76.2
(1.750) (3.00)
4
61.09
(2.44)
3
2
Warning
Aluminum housings can be used
1 for pressures up to 210 bar
15.78 - 15.82
(0.621 - 0.623) (3000 psi). Steel housings must
17.38 - 17.42
(0.684 - 0.686) be used for operating pressures
18.95 - 18.99
(0.746 - 0.748) above 210 bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-169
PTS16-12 - Pilot to shift valve
Pilot operated, directional control valve
76 L/min (20 USgpm) • 350 bar (5000 psi)
4 2 Operation Features
This valve allows flow directed between ports 1 and Hardened, ground and honed
between ports 1 and 2 and 4 and ports 3 and 2. During sleeve and spool for low
ports 3 and 4 until sufficient the cross-over transition, all internal leakage. Working
pressure has been applied at ports are blocked. The spring pressure 350 bar.
port 5 and the spring bias is chamber for this valve is
overcome. At that time, flow is vented internally to port 1.
5 3 1
10 30 50 70
1 200 A- Port 4 to1
A C- Port 3 to 2
Description 180
B- Port 3 to 4
This is a 4-way, 2 position, 160
D- Port 2 to 1
remotely pilot operated 10
directional control valve ideal 140
for reversing a function when
Pressure Drop- bar
B
Pressure Drop- psi
80
5
D
60
40
20
0
0 4 8 12 16 20
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
D-170 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
PTS16-12 - Pilot to shift valve
Pilot operated, directional control valve
76 L/min (20 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
5 SAE #4 - PORT
34.3
34.29 28.7 (1.35)
(1.350) (1.31)
31.75 Hex
(1.25) 4
74.4 101.6 3
1 1/16 - 12 UN-2A THD (2.931) (4.00)
2 51.6
127.0 (2.031)
(5.00)
1
31.8 31.8
4 10.3 78.6 (1.25)
(1.25) (3.094)
(0.406) 63.5
91.69 88.9 (2.50)
(3.610) (3.50)
3
Warning
2
Aluminum housings can be used
for pressures up to 210 bar
(3000 psi). Steel housings must
1 20.55 - 20.59 be used for operating pressures
22.13 - 22.17 (0.809 - 0.811) above 210 bar (3000 psi).
(0.871 - 0.873) Ø23.73 - 23.77
(0.934 - 0.936)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com D-171
- Additional products, product lines, and services offered by Eaton -
Hydraulics
Valves Mobile & Industrial
Proportional Valves
Servic
Searcy, AR Plant
Pressure control
Direct and pilot operated pressure control
valves for applications up to 350 bar
(5000 psi) and 300 L/min (80 USgpm)
Pressure control
PRESSURE CONTROLS ...........................................E-4 PSV10-10 - PRESSURE SEQUENCE VALVE..........E-76
1DR2 - RELIEF VALVE............................................. E-10 PSV2-10 - PRESSURE SEQUENCE VALVE ...........E-78
1DR30 - RELIEF VALVE...........................................E-12 PSV4-10 - PRESSURE SEQUENCE VALVE ...........E-80
RV1-10 - RELIEF VALVE ..........................................E-14 PSV1-10 - PRESSURE SEQUENCE VALVE............E-82
RV1-12 - RELIEF VALVE..........................................E-16 PSV5-10 - PRESSURE SEQUENCE VALVE ...........E-84
RV5-10 - RELIEF VALVE ..........................................E-18 PSV3-10 - PRESSURE SEQUENCE VALVE ...........E-86
RV11-12 - RELIEF VALVE ........................................E-20 PSV7-10 - PRESSURE SEQUENCE VALVE............E-88
1AR100 - RELIEF VALVE .........................................E-22 1DS30 - PRESSURE SEQUENCE VALVE ..............E-90
RV5-16 - RELIEF VALVE .........................................E-24 1DS60 - PRESSURE SEQUENCE VALVE ..............E-92
1ARD100 - SHOCKLESS RELIEF VALVE ...............E-26 1DS100 - PRESSURE SEQUENCE VALVE.............E-94
RV4-10 - RELIEF VALVE ..........................................E-28 1PS60 - PRESSURE SEQUENCE VALVE ...............E-96
RV2-10 - RELIEF VALVE ..........................................E-30 1PS100 - PRESSURE SEQUENCE VALVE .............E-98
1ARC100 - RELIEF VALVE ......................................E-32 PSV1-16 - PRESSURE SEQUENCE VALVE ......... E-100
RV8-8 - RELIEF VALVE ...........................................E-34 1PS200 - PRESSURE SEQUENCE VALVE ........... E-102
RV3-10 - RELIEF VALVE ..........................................E-36 PSV11-16 - 16 -PRESSURE SEQUENCE
VALVE ................................................................... E-104
RV8-10 - RELIEF VALVE ..........................................E-38
1PSC30 - PRESSURE SEQUENCE VALVE .......... E-106
RV3-12 - RELIEF VALVE .........................................E-40
1PSC100 - PRESSURE SEQUENCE VALVE......... E-108
RV8-12 - RELIEF VALVE .........................................E-42
1UPS100 - PRESSURE SEQUENCE VALVE ........ E-110
RV8-16 - RELIEF VALVE .........................................E-44
PUV3-10 - PILOT UNLOADING VALVE ................ E-112
1LR300 - RELIEF VALVE .........................................E-46
ADV1-16 - ACCUMULATOR DISCHARGE
1UAR100 - RELIEF VALVE ......................................E-48
VALVE ................................................................... E-114
1GR30 - RELIEF VALVE ..........................................E-50
PRV1-10 - PRESSURE
1GR60 - RELIEF VALVE ..........................................E-52 REDUCING/RELIEVING VALVE ........................... E-116
1GR100 - RELIEF VALVE ........................................E-54 PRV2-10 - PRESSURE
REDUCING/RELIEVING VALVE ........................... E-118
1VR100 - RELIEF VALVE .........................................E-56
PRV12-10 - PRESSURE
1VR200 - RELIEF VALVE ........................................E-58 REDUCED/RELIEVING VALVE .............................E-120
1UL60 - RELIEF/UNLOADING VALVE ...................E-60 PRV12-12 - PRESSURE
1PUL60 - RELIEF/UNLOADING VALVE .................E-62 REDUCING/RELIEVING VALVE ...........................E-122
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-3
Pressure controls
Valve locator
Functional symbol
Flow Typical
2 Model Cavity rating pressure Page
Flow Typical
2 Model Cavity rating pressure Page
Flow Typical
Model Cavity rating pressure Page
Flow Typical
2 Model Cavity Rating pressure Page
1
Flow Typical
2 Model Cavity rating pressure Page
1
Flow Typical
1 Model Cavity rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-4 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
Pressure controls
Valve locator
1
Flow Typical
2 Model Cavity rating pressure Page
1 E
Flow Typical
2 Model Cavity rating pressure Page
1
Flow Typical
2 Model Cavity rating pressure Page
1 Flow Typical
3 2 Model Cavity rating pressure Page
1
Flow Typical
1 Model Cavity rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-5
Pressure controls
Valve locator
Functional symbol
Flow Typical
2 Model Cavity rating pressure Page
Flow Typical
2 Model Cavity rating pressure Page
E 3
Flow Typical
2 Model Cavity rating pressure Page
3
Flow Typical
2 Model Cavity rating pressure Page
3 1
Flow Typical
2 Model Cavity rating pressure Page
3 1
Flow Typical
2 Model Cavity rating pressure Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-6 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
Pressure controls
Valve locator
Functional symbol
Flow Typical
2 Model Cavity rating pressure Page
1
Flow Typical
2 Model Cavity rating pressure Page
3 1
E
Flow Typical
2 Model Cavity rating pressure Page
3 1
Flow Typical
2 Model Cavity rating pressure Page
3 1
Flow Typical
Model Cavity rating pressure Page
2
Series sequence valve, spool, unloading L/min (USgpm) bar (psi)
1UPS100 A880 150 (40) 350 (5000) E-110
1
Flow Typical
3 Model Cavity rating pressure Page
1
PUV3-10 C-10-3 4 (1) 210 (3000) E-112
2
Flow Typical
2 Model Cavity Rating Pressure Page
1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-7
Pressure controls
Valve locator
Functional symbol
Flow Typical
1 Model Cavity rating pressure Page
3 2
Flow Typical
1 Model Cavity rating pressure Page
E 3 2
Flow Typical
1 Model Cavity rating pressure Page
3 2
Flow Typical
1(P) Model Cavity rating pressure Page
2(REG)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-8 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
Pressure controls
Introduction
This section gives basic • Pilot operated poppet type Reducing valves Accumulator
specifications for Eaton with reverse free-flow Two types are available: unloading valves
pressure control threaded check – RV2 Valves that allow accumulators
cartridge valves. Its purpose is Use as a service line relief
• Direct operated with
relieving feature – PRV1 to be charged to a preselected
to provide a quick, convenient where anticavitation make-up maximum pressure at which
reference tool when choosing is required. It may also • Pilot operated with relieving the pump is unloaded. The
Eaton cartridge valves or be applied as an internally feature – PRV2 and PRV12 pump does not cut-in until
designing a system using piloted counterbalance valve • Pilot operated without the accumulator pressure has
these components. in a service line. relieving feature decayed to a pre-selected
Eaton offers a full range of • Direct operated poppet Sequence valves percentage of maximum
Eaton direct and pilot operated type, differential area pressure. The low-flow PUV3
A complete range of sequence
relief, reducing, sequence and models – RV3 and RV8 model can be used as a stand
functions is available,
unloading valves. In general, Sometimes termed a alone model for low flow
including:
he direct operated products “differential area relief applications, or as a pilot stage
are faster in response while valve”. A fast acting • Normally-closed and in two-stage arrangements for
pilot operated types have valve, highly tolerant of normally-open models higher flows.
a flatter pressure/flow contaminant and providing • Internal and external pilot
an alternative flow path, Accumulator discharge
characteristic. options
frequently beneficial in valve
• Internal and external drain
Relief valves manifold layout. Utilized This valve is designed to
options
in CRV3 crossline relief ensure that an accumulator
When selecting a relief valve
for a specific application, packages.
• Two and three position
will discharge when pilot E
models pressure is lost, e.g. on pump
consideration should be given • Pilot operated spool
to the following Externally drained models shutdown.
type – RV5 and RV11
may be used as relief valves
• Direct operated poppet Well suited for repetitive, Fluid cleanliness
in circuits with alternating
types – RV1 and RV10 continuous duty with a
pressure and tank line Proper fluid condition
Suitable for continuous low pressure-override
functions. is essential for long and
duty with reliable fast characteristic.
satisfactory life of hydraulic
response, the RV10 being • Direct operated ball components and systems.
a low pressure, low cost type – RV6 Hydraulic fluid must have the
option. These valves are A fast-acting valve for correct balance of cleanliness,
also suitable for piloting the intermittent duty. This low materials, and additives
DPS2 logic elements. flow, low cost valve may be for protection against wear
used as a pilot section for of components, elevated
a larger mainstage valve, or viscosity, and inclusion of air.
piloting logic elements.
Adjustments
The adjustment range and not be used without first that screwing an adjuster to
Max setting figures shown contacting our Engineering its maximum or minimum
throughout this catalogue department. Setting must position will yield the
give the design range for each ALWAYS be carried out using maximum or minimum stated
valve, higher or lower values an appropriate gauge and design setting for that valve. Tightening torque of “F”
may be attainable but should it must NOT be assumed adjuster locknut - 20 to 25 Nm
‘P’ - Leakproof Screw ‘R’ - Handknob ‘G’ - Tamperproof Cap ‘F’ - Screw
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-9
1DR2 - Relief valve
Poppet, direct acting
1,2 L/min (0.3 USgpm) • 400 bar (5800 psi)
2 Operation Features
Pressure on the nose of the Fast acting, good reseat, ideal
cartridge acts over the seat for remote operation of larger
area moving the poppet valves.
against the spring, allowing
relief flow to tank.
1
Sectional view Performance data
3625 250
2900 200
2175 150
1450 100
725 50
0 0
0 0.26 0.52 0.78 1.04 1.3
Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-10 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1DR2 - Relief valve
Poppet, direct acting
1,2 L/min (0.3 USgpm) • 400 bar (5800 psi)
1 2 3 4 5
3/4-16 UNF
27.0
(1.06) Warning
Aluminum housings can be
used for pressures up to 210 bar
Tank (2) (3000 psi). Steel housings must
be used for operating pressures
above 210 bar (3000 psi).
Pressure (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-11
1DR30 - Relief valve
Poppet, direct acting
30 L/min (8 USgpm) • 400 bar (5800 psi)
2 Operation Features
Pressure on the nose of the Fast acting, low pressure rise
cartridge acts over the seat due to flow for a direct acting
area moving the poppet valve.
against the spring, allowing
relief flow to tank.
Performance data is typical with fluid at 32 cSt (150 SUS) and 40° C (120° F)
Typical application pressure 400 bar (5800 psi)
Rated flow 30 L/min (8 USgpm)
Cartridge Material Working parts hardened and ground steel.
External sufaces zinc plated.
E Cavity C-8-2 (see Section M)
Standard housing materials Aluminum (up to 210 bar)
or Steel (add 377 suffix for steel option)
Torque Cartridge into Cavity 45 Nm (33 lbs ft)
Temperature range -30° to 90°C (-22° to 194°F)
All general purpose hydraulic fluids such as:
Fluids
MIL–H–5606, SAE 10, SAE 20, etc.
Filtration Cleanliness Code BS5540-4 18/13 (25 micron nominal)
Weight cartridge only 0,17 kg (0.37)
Internal leakage 0.3 ml/min nominal (5 dpm)
Tank (2) Nominal Viscocity Range 5 to 500 cSt
Seal kits SK243 Buna–N
SK243V Viton®
Pressure (1) Viton is a registered trademark of E.I. DuPont
3625 250
2900 200
2175 150
1450 100
725 50
0 0
0 2.6 5.2 7.8 10.4 13
Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-12 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1DR30 - Relief valve
Poppet, direct acting
30 L/min (8 USgpm) • 400 bar (5800 psi)
1 2 3 4 5
31.0
44.0
50.0 (1.73) (1.22) 1
(1.97)
2 15.9
12.7
(0.50) (0.62)
70.0 2 holes
(2.76) 28.8 31.8
Ø6.8 (0.27) (1.25)
max thro’ (1.13)
(40S) 52.0
(2.05) 44.8 (1.76)
max 50.8 (2.00)
(10S/20S) 25.4 A/F
3/4-16 UNF
Warning
Aluminum housings can be
26.2 used for pressures up to 210 bar
(1.03) (3000 psi). Steel housings must
be used for operating pressures
Tank (2) above 210 bar (3000 psi).
Pressure (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-13
RV1-10 - Relief valve
Poppet, direct acting
30 L/min (8 USgpm) • 250 bar (3600 psi)
2 Operation Features
This valve remains closed The poppet is unseated and Fast acting, low pressure rise.
from port 1 to port 2 until the allows flow out of port 2. Low internal leakage, high
predetermined setting has flow rate for compact design
been reached at port 1.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 250 bar (3600 psi)
Cartridge fatigue pressure (infinite life) 250 bar (3600 psi)
Rated flow 30 L/min (8 USgpm)
E Internal leakage 0.3 L/min (5 drops/min) @ 85% of Pressure Setting
Cavity C-10–2
Standard housing materials Aluminum or steel
Temperature range -40° to 120°C (-40° to 248°F)
Fluids All general purpose hydraulic fluids such as:
MIL–H–5606, SAE 10, SAE 20, etc.
Filtration Cleanliness Code 18/16/13
Weight cartridge only 0,22 kg (0.48 lbs)
Seal kits 565803 Buna–N
566086 Viton®
1
Description Pressure override curves
This is a direct acting, poppet Cartridge only Flow - L/min (21/8 cSt oil @ 49°C)
style screw in cartridge relief
valve ideal for low cost small 0 10 20 30
flow applications to limit the 3000 200
pressure in the system. A
Inlet pressure - bar
Inlet pressure - psi
150
2000
B
100
1000
C 50
A - 36 spring 0 0
B - 18 spring 0 2 4 6 8 10
C - 9 spring Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-14 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
RV1-10 - Relief valve
Poppet, direct acting
30 L/min (8 USgpm) • 250 bar (3600 psi)
1 2 3 4 5 6 7 8 9
1 Function
6 Port size 9 Special features
RV1 - Relief valve - Standard Code Port size Housing Number 00 - None
RV1A - Relief valve - with (Only required if valve has special
Aluminum Aluminum Steel
1/2 thickness back-up ring on Light duty Fatigue rated Fatigue rated features, omitted if “00.”)
each side of o-ring (for cross SS - 316 Stainless Steel
port relief applications) 0 Cartridge only
external components
3B 3/8” BSPP 02–175462 – –
2 Size 2G 1/4” BSPP – 876702 02–175102
3G 3/8” BSPP – 876703 02–175103
10 - 10 size
6H SAE 6 – 876700 –
3 Seal material 8H SAE 8 – 876701 –
6T SAE 6 566151 – 02–175100
Blank - Buna-N
V - Viton®
8T SAE 8 – – 02–175101
E
See section J for housing.
4 Adjustment
C - Cap 7 Cracking pressure range 8 Setting pressure Warning
F - Factory set Note: Code based on Aluminum housings can be
Within ranges in 7
I - Internal pressure in psi. used for pressures up to 210
3 -3,5-20 bar (50-300 psi) Blank - Normal factory setting bar (3000 psi). Steel housings
K - Knob
at approximate mid-range. must be used for operating
S - Screw 9 -7- 62 bar (100-900 psi) User requested settings in pressures above 210 bar
18 - 17-124 bar (250-1800 psi) 3,45 bar (50 psi) steps, Coded (3000 psi).
5 Valve housing material 30 - 34-210 bar (600-3000 psi) as in the following examples:
Blank - Aluminum 36 - 124-250 bar (1800-3600 psi) 10 -70 bar (1000 psi)
S - Steel 10.5 -72,4 bar (1050 psi)
53,0
(2.08)
19.1
2X 7.1 2 (0.75)
(0.28) 63.5
(2.50)
0.875"-14 Thd.
25,4 (1.00) hex
31,8 19.0
1 (0.75)
(1.25)
2 9.5 25.4
(0.37) 63.5 (1.00)
(2.50)
1
Ø 15,82 (0.623)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-15
RV1-12 - Relief valve
Poppet, direct acting
114 L/min (30 USgpm) • 350 bar (5000 psi)
2 Operation Features
This valve remains closed The poppet is unseated and Hardened and ground working
from port 1 to port 2 until the allows flow out of port 2. parts. Low leakage poppet
predetermined setting has design. High flow rate for a
been reached at port 1. compact cartridge.
Performance data is typical with fluid at 23,3 cSt (111 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 114 L/min (30 USgpm)
Cracking pressure ranges 3,4-275 bar (50-4000 psi)
E Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-12-2 or C-12-2U
All general purpose hydraulic fluids such as:
Fluids
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness Code 18/16/13
Standard housing materials Aluminum or Steel
Weight cartridge only 0,49 kg (1.08 lbs)
02-165881 (Buna-N)
Seal kit
02-165888 (Viton®)
Viton is a registered trademark of E.I. DuPont
2 Endurance tested to 1 million cycles at full rated flow and pressure.
3500 245
3000 210
2500 B
175
2000 140
1500 105
1000 C 70
A - 40 spring 500 D 35
B - 22 spring
0
C - 8.5 spring 0 5 10 15 20 25 30 35
D - 2.5 spring GPM
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-16 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
RV1-12 - Relief valve
Poppet, direct acting
114 L/min (30 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9 10
95.4
(3.75)
12.7
12.7 (0.50)
11/16 - 12UN - 2A (0.50)
2
44,7 88.9
(1.76) (3.50) 63.50
(2.50) 28.7
2” (1.13)
1
Ø 23,73 - 23,77
(.934 - .936) 63.50 2X Ø10.31 25.4
1” (2.50) (0.406) (1.00)
88.9
ADJUSTMENT CODE C (3.50)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-17
RV5-10 - Relief valve
Spool, pilot operated
114 L/min (30 USgpm) • 350 bar (5000 psi)
2 Operation Features
When the inlet pressure The subsequent pressure High accuracy of pilot operated
exceeds the setting of the drop moves the spool against design. Hardened working parts
valve, the pilot section opens, a light spring opening a ring give long, reliable, trouble-free
causing a small flow across of radial holes in the sleeve, life. Cartridge construction
the orifice in the main spool. allowing relief flow to tank. for installation into your own
manifold.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 114 L/min (30 USgpm)
E Internal leakage, port 1 to port 2 114 cc/min (7cu in/min @ 350 bar (5000 psi)
Cavity C-10–2
Standard housing materials Aluminum or steel
Temperature range -40° to 120°C (-40° to 248°F)
All general purpose hydraulic fluids such as:
Fluids
MIL–H–5606, SAE 10, SAE 20, etc.
Filtration Cleanliness Code 18/16/13
Weight cartridge only 0,22 kg (0.48 lbs)
Seal kits – RV5 565803 Buna–N
566086 Viton®
2 565806 Buna–N
– RV5A
889627 Viton®
Viton is a registered trademark of E.I. DuPont
1
3000 210
B
2000 140
1000 70
0 0
A - 50 spring 0 5 10 15 20 25 30
B - 20 spring Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-18 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
RV5-10 - Relief valve
Spool, pilot operated
114 L/min (30 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9 10
“I” Adjustment
“S”Adjustment “K”Adjustment,
Ø 38,1 (1.50)
“F”Adjustment
80,0 80.0
(3.13) (3.13)
53,0
(2.08) 19.1
25,4 (1.00) hex 2X 7.1 2 (0.175)
(0.28) 63.5
(2.50)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-19
RV11-12 - Relief valve
Spool, pilot operated
190 L/min (50 USgpm) • 350 bar (5000 psi)
2 Operation Features
When the inlet pressure The subsequent pressure High accuracy of pilot operated
exceeds the setting of the drop moves the spool against design. Hardened working parts
valve, the pilot section opens, a light spring opening a ring give long, reliable, trouble-free
causing a small flow across of radial holes in the sleeve, life. Cartridge construction
the orifice in the main spool. allowing relief flow to tank. for installation into your own
manifold.
1 Performance data
Description
Pressure override curves
To limit pressure in a system.
Good for continuous duty and
accurate pressure control with Flow - L/min (21,8 cSt oil @ 49C)
constant or varying flows. 20 40 60 80 100 120 140 160 180 190
6000 415 Cartridge
w/C-12-2 Cavity
Inlet pressure - bar
Inlet pressure - psi
3000 210
2000 140
1000 70
0
0 5 10 15 20 25 30 35 40 45 50
Flow - USgpm (105 SUS oil @ 120F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-20 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
RV11-12 - Relief valve
Spoo l, pilot operated
190 L/min (50 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9
63.50 2X Ø10.31
(2.50) (0.406)
88.9
(3.50)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-21
1AR100 - Relief valve
Spool, pilot operated
150 L/min (40 USgpm) • 400 bar (5800 psi)
2 Operation Features
When the inlet pressure The subsequent pressure High accuracy of pilot
exceeds the setting of the drop moves the spool against operated design. Hardened
valve, the pilot section opens, a light spring opening a ring working parts give long,
causing a small flow across of radial holes in the sleeve, reliable, trouble-free life.
the orifice in the main spool. allowing relief flow to tank. Cartridge construction for
installation into your own
manifold.
1
Figures based on: Oil Temp = 40°C Viscosity = 32 cSt (150 SUS)
Rated flow 150 L/min (40 USgpm)
Max setting1AR100 400 bar (5800 psi)
Cartridge material Working parts hardened and ground steel.
E External surfaces zinc plated.
Body material Standard aluminium (up to 210 bar*).
Add suffix “377” for steel option.
Mounting position Unrestricted
Cavity A881 (See Section M)
Torque cartridge into cavity 60 Nm (44 lbs ft)
Weight1AR100 0.14 kg (0.3 lbs)
1AR150 0.65 kg (1.4 lbs)
1AR155 0.91 kg (2.0 lbs)
Tank (2) Seal kit SK164 (Nitrile) SK164V (Viton®)
Recommended filtration level BS5540/4 class 18/13 (25 micron nominal)
Operating temp -30° to +90°C (-22° to +194°F)
Pressure (1) Leakage 20 to 65 milliliters/min nominal
Nominal viscosity range 5 to 500 cSt
Viton is a registered trademark of E.I. DuPont
Description
To limit pressure in a system. Pressure drop curves
Good for continuous duty and
accurate pressure control with
constant or varying flows. Flow - L/min
0 38 76 114 152
5800 400
5075 350
4350 300
Pressurep - psi
Pressure - bar
3625 250
2900 200
2175 150
1450 100
725 50
0 0
0 10 20 30 40
Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-22 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1AR100 - Relief valve
Spool, pilot operated
150 L/min (40 USgpm) • 400 bar (5800 psi)
1 2 3 4 5
2 145.4
71.4 (5.72)
92.0 (2.81) max
(3.62) 35.0
(1.38)
1 1
1-14 UNS-2A 31.8
50.8 (1.25)
6.3 (0.25) 38.1
(2.00)
(1.50) 50.8 (2.00)
38.0 (1.5)
Complete valve
1” Ports
76.00
56.7 (2.23) Basic Code (2.99)
32.0
(1.26)
1AR155
154.0
(6.06) 49.2 2
max (1.94)
100.0
(3.94)
TANK (2) 1 1
25.4
(1.00) 7.9 (0.31) 60.3
(2.37)
50.8 2 holes
(2.00) Ø10.3 (0.41) 76.2
Pressure (1) thro’ (3.00)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-23
RV5-16 - Relief valve
Spool, pilot operated
300 L/min (80 USgpm) • 350 bar (5000 psi)
2 Operation Features
When the inlet pressure The subsequent pressure High accuracy of pilot operated
exceeds the setting of the drop moves the spool against design. Hardened working parts
valve, the pilot section opens, a light spring opening a ring give long, reliable, trouble-free
causing a small flow across of radial holes in the sleeve, life. Cartridge construction
the orifice in the main spool. allowing relief flow to tank. for installation into your own
manifold.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 300 L/min (80 USgpm)
E Internal leakage, port 1 to port 2 164 cc/min (10cu in/min@350 bar (5000 psi)
Cavity C-16–2
Standard housing materials Aluminum or steel
Temperature range -40° to 120˚C (-40° to 248˚F)
Fluids All general purpose hydraulic fluids such as:
MIL–H–5606, SAE 10, SAE 20, etc.
Filtration Cleanliness Code 18/16/13
Weight cartridge only 0,71 kg (1.57 lbs )
Seal kits 889631 Buna–N
2 889635 Viton®
Viton is a registered trademark of E.I. DuPont
4000 280
3000 210
B
2000 140
1000 70
0 0
A - 60 spring 0 20 40 60 80
B - 35 spring Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-24 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
RV5-16 - Relief valve
Spool, pilot operated
300 L/min (80 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9
“C”Adjustm ent
“K”Adjustm ent
“S”Adjustm ent 57.2
(2.25) 25.4
6,3 (0.25)hex (1.0)
60,3 57,1 28.4
(2.37) (2.25) (1.12)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-25
1ARD100 - Shockless relief valve
Pilot relief valve
100 L/min (26 USgpm) • 210 bar (3000 psi)
Figures based on: Oil Temp = 40°C Viscosity = 32 cSt (150 SUS)
E Rated flow 100 L/min (26 USgpm)
Max relief setting 210 bar (3000 psi)
Response time at max dampening 0.12 secs at max flow
Cartridge material Working parts hardened and ground steel. External steel surfaces zinc plated.
Mounting position Unrestricted
Cavity number A881
Torque cartridge into cavity 60 Nm (44 ft lbs)
Weight 0.41 kg (0.9 lbs)
Seal kit number SK 1412 Buna N / SK1412V Viton®
Recomended filtration level BS5540/4 Class 18/13 (25 micron nominal)
Operating temperature -30º to +90ºC (-22º - +194ºF)
Leakage 100 millilitres/min nominal
Nominal viscosity range 5-500 cSt
Viton is a registered trademark of E.I. DuPont
Description
The 1ARD100 is designed
to remove pressure spikes
in a system by providing
dampening on initial opening.
The level of dampening is
adjustable but the setting
is fixed with increments of
10 bar with a tollerance of
+/- 10 bar. This valve is ideal
for use on rotating machinery
where pressure spikes may
be evident on start up or
reversing.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-26 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1ARD100 - Shockless relief valve
Pilot relief valve
100 L/min (26 USgpm) • 210 bar (3000 psi)
1 2 3 4 5
Dimensions Warning
mm (inch) Aluminium housings can be
used for 210 bar (3000 psi) Steel
Cartridge only housings must be used for
operating pressure above 210 bar
Basic Code (3000 psi).
1ARD100
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-27
RV4-10 - Relief valve
Poppet, thermal relief with reverse flow check
1 L/min (0.25 USgpm) relief/45 L/min (12 USgpm) check • 350 bar (5000 psi)
2 Operation Features
As a check valve the valve Flow will then take place from Very low leakage from port
remains closed until the port 2 to 1. This flow should be 1 to 2. Hardened and ground
pressure at port 1 exceeds limited to that produced due to working parts. Good re-seat.
the 1.24 bar (18 psi) cracking the thermal expansion of the Compact solution in a single
pressure. The valve will hold oil in port 2. cartridge.
pressure in port 2 until the
setting of the thermal relief
1 is reached.
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Rated flow – check valve 45 L/min (12 USgpm)
– relief valve 1 L/min (0.25 USgpm)
E Relief cracking pressure ranges 28 - 350 bar (400 - 5000 psi)
Check valve cracking pressure 1,24 bar (18 psi)
Reseat pressure More than 90% of cracking pressure
Internal leakage, port 2 to port 1 0.3 mL/min (5 drops/min) at cracking pressure
Cavity C-10–2
Standard housing materials Aluminum or steel
Temperature range -40° to 120°C (-40° to 248°F)
Fluids All general purpose hydraulic fluids such as:
MIL–H–5606, SAE 10, SAE 20, etc.
2 Filtration Cleanliness Code 18/16/13
Weight cartridge only 0,11 kg (0.25 lbs)
Seal kits 565803 Buna–N
566086 Viton®
1 Viton is a registered trademark of E.I. DuPont
be over-flowed. 300 6
Pressure Drop - bar
Pressure Drop - psi
4000 80
250 5
3000 60
200 4
2000 150 40 3
100 2
1000 20
50 1
0 0 0 0
0 0.5 1.0 1.5 0 2 4 6 8 10 12 14
Flow - USgpm (105 SUS oil @ 120°F) Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-28 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
RV4-10 - Relief valve
Poppet, thermal relief with reverse flow check
1 L/min (0.25 USgpm) relief/45 L/min (12 USgpm) check • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9
19.1
(0.75)
19,1
(0.75) 25,4 (1.0)hex
19.1
2X 7.1 2 (0.75)
(0.28) 63.5
(2.50)
0.875"-14 Thd.
31,7 12.7
(1.25) 1 (0.5)
2
9.5
(0.37)
63.5 22.2
(2.50) (0.87)
1
Ø 15,80 (0.622) Warning
Aluminum housings can be used
for pressures up to 210 bar (3000
psi). Steel housings must be used
for operating pressures above 210
bar (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-29
RV2-10 - Relief valve
Poppet, pilot operated with reverse flow check
12-114 L/min (3-30 USgpm) • 350 bar (5000 psi)
2 Operation Features
When the inlet reaches the The subsequent pressure drop Very low pressure rise for
valve setting, the pilot section moves the poppet, opening any increase in flow giving
opens, causing a small flow the valve, allowing relief flow accurate pressure control.
across the orifice in the to tank. Hardened working parts give
poppet. long, reliable, trouble-free
life. Cartridge construction
giving maximum flexibility
1 in mounting.
3000 210
150 10
2000 140
B 100 7
1000 70 50 3,5
0 0 0 0
0 5 10 15 20 25 30 0 5 10 15 20 25 30
Flow - USgpm (105 SUS oil @ 120°F) Flow - USgpm (105 SUS oil @ 120°F)
A - 50 Spring
B - 20 Spring
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-30 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
RV2-10 - Relief valve
Poppet, pilot operated with reverse flow check
12-114 L/min (3-30 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9
53,0
(2.08)
25,4 (1.0)hex
19.1
2X 7.1 2 (0.75)
(0.28) 63.5
(2.50)
0.875"-14 Thd.
31,8
(1.25) 12.7
2
1 (0.50)
9.5 22.2
(0.37)
1 63.5 (1.75)
Ø 15,82 (0.623) (2.50)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-31
1ARC100 - Relief valve
Spool, pilot operated with reverse flow check
150 L/min (40 USgpm) • 400 bar (5800 psi)
2 Operation Features
When the inlet reaches the The subsequent pressure drop Very low pressure rise for
valve setting, the pilot section moves the spool, opening a ring any increase in flow giving
opens, causing a small flow of radial holes in the sleeve, accurate pressure control.
across the orifice in the spool. allowing relief flow to tank. Hardened working parts give
long, reliable, trouble-free
life. Cartridge construction
giving maximum flexibility
1 in mounting.
Pressure - psi
145 10 1160 80
0 0 0 0
0 8 16 24 32 40 0 8 16 24 32 40
Flow - US gpm Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-32 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1ARC100 - Relief valve
Spool, pilot operated with reverse flow check
150 L/min (40 USgpm) • 400 bar (5800 psi)
1 2 3 4 5
1 3 4 Pressure range
Function Port size
1ARC100 - Cartridge Only Note: Code based on
Code Port size Housing number - body only
1ARC145 - Cartridge and Body pressure in bar.
Aluminium Aluminium Steel Aluminium Steel 7 - 10-70 bar.
1ARC150/1ARC155 1AR145 1AR150 1AR150 1AR155 1AR155
- Cartridge and Body Std setting 35 bar
Through ported 3W 3/8” BSP C1084 20 - 10-210 bar.
4W 1/2” BSP B4851 C1044 C593 Std setting 100 bar
40 - 50-400 bar.
6W 3/4” BSP B3954 C1086 C4917
2 Adjustment means Std setting 280 bar Std
8W 1” BSP B1617 B4596 setting made at 14 L/min
P - Leakproof Screw
Adjustment 6T 3/8” SAE B10784
R - Handknob Adjustment 8T 1/2” SAE B19403 C7140 5 Seals
G - Tamperproof Cap 12T 3/4” SAE B19404 B10506 B10742
(See page E-7 for dimensions) S - Nitrile (For use with most
16T 1” SAE B1037 B24040 industrial hydraulic oils) E
SV - Viton (For high
temperature and most
Dimensions special fluid applications)
mm (inch)
Cartridge only Complete valve
Basic Code 1/2”, 3/4” Ports 13.00
1ARC100 Basic Code (0.51)
1ARC145 142.80
Note: For applications above 2 holes (5.6) 35.00
ø9.0 (0.35) max (1.38)
210 bar, please consult our thro’ 2 50.80 2 89.00
Hex socket adjust (2.0)
technical department or use 4.0 A/F
(3.50)
the steel body option. 1 1
35.0 2 145.4
(1.38) (5.72)
92.0 71.4 max
(3.62) (2.81)
1 1
Complete valve
56.7 (2.23) 1” Ports 76.00 32.0
(2.99) (1.26)
Basic Code
1ARC155 154.0
(6.06) 49.2 2
max (1.94)
Tank (2) 100.0
(3.94)
1 1
25.4
(1.00) 7.9 (0.31) 60.3
(2.37)
50.8 2 holes
Ø10.3 (0.41) 76.2
Pressure (1) (2.00)
thro’ (3.00)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-33
RV8-8 - Relief valve
Poppet, differential area
30 L/min (8 USgpm) • 350 bar (5000 psi)
1
Operation Features
The RV8-8 remains closed The force created by the Hardened and ground working
until the predetermined pressure acting on the parts. Low leakage poppet
setting is reached at port 2. differential poppet area lifts design. High flow rate for a
the poppet off the seat and compact cartridge.
allows flow from port 2 to
port 1.
2
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 280 bar (4000 psi)
Rated flow 30 L/min (8 USgpm)
Cracking pressure ranges 15: 3,4-100 bar (50-1500 psi)
E 30: 70-210 bar (1000-3000 psi)
50: 70-350 bar (1000-5000 psi)
Internal leakage, port 2 to port 1 Less than 5 drops/min @ 80% of cracking pressure
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
2
Housing material (standard) Aluminum or steel
1 Weight including coil 0,20 kg (0.43 lbs)
Seal kit 02-165874 (Buna-N), 02-165877 (Viton®)
Viton is a registered trademark of E.I. DuPont
Description
The RV8-8 is a direct acting Pressure drop
differential area, poppet type, Cartridge only
screw-in cartridge relief valve.
Flow - L/min (21,8 cSt oil @ 49°C)
0 4 8 12 16 2 0 24 2 8
6000 400
A
5000 345
Inlet Pressure - psi
4000 270
B
3000 210
2000 140
C
1000 70
0 0
0 1 2 3 4 5 6 7 8
A - 50 spring
B - 30 spring
C - 15 spring
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-34 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
RV8-8 - Relief valve
Poppet, differential area
30 L/min (8 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9
7 Cracking pressure
1 Function 6 Port size ranges
RV8- Relief valve Code Port size Housing number
15 - 3,4-100 bar (50-1500 psi)
30 - 70-210 bar (1000-3000 psi)
Aluminum Steel 50 - 70-350 bar (1000-5000 psi)
Fatigue rated Fatigue rated
2 Size
0 Cartridge only
8 - 8 size 8 Pressure setting
4T SAE 4 02-160730 02-160736
Optional - Specify in 100 psi
3 6T SAE 6 02-160731 02-160737 increments. If not specified,
Seal material
8T SAE 8 02-160732 02-160738 set at:
Blank - Buna-N
V - Viton® 2G 1/4” BSPP 02-160727 02-160733 15 - 52 bar (750 psi)
3G 3/8” BSPP 02-160728 02-160734
30 - 100 bar (1500 psi)
4 Adjustment
50 - 175 bar (25000 psi) E
*Light duty housing.
C - Cap See section J for housing details.
K - Knob 9 Special features
S - Screw 00 - None
(Only required if valve has special
5 features, omitted if “00.”)
Valve housing material Note: Use J series, 23 W coils
Omit for cartridge only with this solenoid valve.
S - Steel
A - Aluminum
For valve dimensions with
manual override option
installed see page A-980.
81,5
12,7 (0.50) hex (3.20)
Torque to 3-6 Nm Full
(4-8 ft. lbs) 72,6 out
67,8 (2.85)
(2.67) Full
out
22,2 (0.87) hex 53,8
(2.13)
76,5
(3.02)
0.750"-16 Thd.
Warning Warning
Aluminum housings can be used for Maintain 5-8 Nm (4-6 ft lbs)
27,8
2 pressures up to 210 bar (3000 psi). maximum torque on valve tube nut.
(1.09)
Steel housings must be used for Over tightening may cause valve
operating pressures above 210 bar failure.
1 (3000 psi).
Ø 12,62 (0.497)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-35
RV3-10 - Relief valve
Poppet, direct acting, differential area
76 L/min (20 USgpm) • 250 bar (3600 psi)
1 Operation Features
This valve remains closed The pressure acts on the Hardened and ground working
from port 2 to 1 until the differential area between the parts. Low leakage poppet
predetermined setting has seat and the seal diameter on design. High flow rate for a
been reached at port 2. the poppet. compact cartridge.
2
Sectional view Performance data
1
Description Pressure override curves
This is a fast, direct acting Cartridge only
differential area screw-in Tank pressure = 0
Flow - L/min (21,8 cSt oil @ 49°C)
cartridge relief valve. The
valve is ideal for the protection 20 40 60
against shock pressures that 4000 280
can damage actuators.
Inlet pressure - bar
Inlet pressure - psi
3000 210
A
2000 140
B
1000 70
C
A - 36 spring 0 0
B - 18 spring 0 5 10 15 20
C - 6 spring Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-36 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
RV3-10 - Relief valve
Poppet, direct acting, differential area
76 L/min (20 USgpm) • 250 bar (3600 psi)
1 2 3 4 5 6 7 8 9 10
53,0
(2.08)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-37
RV8-10 - Relief valve
Poppet, direct acting, differential area
76 L/min (20 USgpm) • 350 bar (5000 psi)
1 Operation Features
This valve remains closed The pressure acts on the Hardened and ground working
from port 2 to 1 until the differential area between the parts. Low leakage poppet
predetermined setting has seat and the seal diameter on design. High flow rate for a
been reached at port 2. the poppet. compact cartridge.
3000 210
B
2000 140
1000 70
C
A - 50 spring 0 0
B - 20 spring 0 5 10 15 20
C - 12 spring Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-38 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
RV8-10 - Relief valve
Poppet, direct acting, differential area
76 L/min (20 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9 10
53,0
(2.08)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-39
RV3-12 - Relief valve
Poppet, direct acting, differential area
132 L/min (35 USgpm) • 350 bar (5000 psi)
1 Operation Features
This valve remains closed The pressure acts on the Hardened and ground working
from port 2 to 1 until the differential area between the parts. Low leakage poppet
predetermined setting has seat and the seal diameter on design. High flow rate for a
been reached at port 2. the poppet. compact cartridge.
4000 280
3500 245
3000 210
2500 B 175
2000 140
1500 105
1000 C 70
A - 40 spring 500 D 35
B - 22 spring 0
C - 8.5 spring 0 5 10 15 20 25 30 35
D - 2.5 spring Flow - USgpm (105 SUS oil @120˚F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-40 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
RV3-12 - Relief valve
Poppet, direct acting, differential area
132 L/min (35 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9 10
95.4
(3.75)
95.4
(3.75)
1-1/4 HEX
12.7
(0.50) 28.7
(1.13)
2
1-1/16 - 12UN - 2A 63.5 2 X Ø 10.31
88.9 (2.500) (0.46)
(3.50)
44.7
(1.76) 1
25.4
12.7 63.5 (1.00)
(0.50) 88.9 (2.500) 50.8
“2”
(3.50) (2.00)
“1”
Ø 23.73 - 23.77
(.934 - .936)
Adjustment Code C
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-41
RV8-12 - Relief valve
Poppet, direct acting, differential area
132 L/min (35 USgpm) • 350 bar (5000 psi)
1 Operation Features
This valve remains closed The pressure acts on the Hardened and ground working
from port 2 to 1 until the differential area between the parts. Low leakage poppet
predetermined setting has seat and the seal diameter on design. High flow rate for a
been reached at port 2. the poppet. compact cartridge.
3000 B 210
2000 140
C
A - 50 spring 1000 70
D
B - 25 spring 0
C - 12 spring 0 5 10 15 20 25 30 35 40
D - 4 spring Flow - USgpm (105 SUS oil @120˚F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-42 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
RV8-12 - Relief valve
Poppet, direct acting, differential area
132 L/min (35 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9 10
4 Adjustment
C - Cap
7 Cavity 9 Setting pressure 10 Special features E
K - Knob Blank - Cavity without Within ranges in 8 00 - None
S - Screw undercut Blank - Normal factory setting (Only required if valve has special
U - Cavity with undercut at approximate mid-range. features, omitted if “00.”)
5 Valve housing material Optional - User requested
8 Cracking pressure settings in 3,45 bar (50 psi)
Omit for cartridge only
A - Aluminum range steps, Coded as in the following
S - Steel Note: Code based on examples:
pressure in psi. 10 - 70 bar (1000 psi)
4 - 3,4-350 bar (50-5000 psi) 10.5 - 72,4 bar (1050 psi)
12 - 13-85 bar (200-1250 psi)
25 - 20-170 bar (300-2500 psi)
50 - 40-350 bar (600-5000 psi)
Warning
Dimensions Torque cartridge in housing Aluminum housings can be
A - 81-95 Nm (60-70 ft. lbs) used for pressures up to 210 bar
mm (inch)
S - 102-115 Nm (75-85 ft. lbs) (3000 psi). Steel housings must
be used for operating pressures
above 210 bar (3000 psi).
Cartridge only
77.8 Installation Drawing (Steel)
(3.06)
82.1
(3.23)
12.7
(0.50) 28.7
(1.13)
1-1/16 - 12UN - 2A
2
63.5 2 X Ø 10.31
88.9 (2.500) (0.46)
44.45 (3.50)
(1.750) 1
25.4
12.7 63.5 (1.00)
(0.50) 88.9 (2.500) 50.8
“2”
(3.50) (2.00)
“1”
Ø 23.73 - 23.77
(.934 - .936)
ADJUSTMENT CODE “S”
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-43
RV8-16 - Relief valve
Poppet, direct acting, differential area
30-303 L/min (8-80 USgpm) • 350 bar (5000 psi)
1 Operation Features
This valve remains closed The pressure acts on the Hardened and ground working
from port 2 to 1 until the differential area between the parts. Low leakage poppet
predetermined setting has seat and the seal diameter on design. High flow rate for a
been reached at port 2. the poppet. compact cartridge.
3000 210
B
2000 140
1000 70
0
A - 50 spring 0 20 40 60 80
B - 35 spring Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-44 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
RV8-16 - Relief valve
Poppet, direct acting, differential area
30-303 L/min (8-80 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9
“K”Adjustment
“S”Adjustment
9,5 (0.37) hex
25.4
38,1 (1.5) hex (1.0)
1.312"-12 Thd.
63.5
(2.50) 2
44,4 76.2
(1.75) (3.00)
2
1
2X 10.3
1 (0.41)
12.7 63.50 (2.50) 25.4
Ø 28,55 (1.124)
(0.50) 88.9 (3.50) (1.0)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-45
1LR300 - Relief valve
Poppet, direct acting, differential area
380 L/min (100 USgpm) • 350 bar (5000 psi)
1 Operation Features
Pressure acts over the Dirt tolerant, robust and
differential area between the consistent with good
seat and seal on the poppet. pressure rise to increase
When the pressure exceeds in flow characteristics for a
the setting, the valve opens, direct acting valve. Cartridge
allowing relief flow to tank, construction provides
washing contaminant away for maximum flexibility
2
from the seat. in mounting.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-46 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1LR300 - Relief valve
Poppet, direct acting, differential area
380 L/min (100 USgpm) • 350 bar (5000 psi)
1 2 3 4 5
5 Seals
S - Nitrile (For use with most
industrial hydraulic oils)
SV - Viton® (For high E
temperature and most
special fluid applications)
Dimensions Note: Tightening torque of “F” Note: For applications above
adjuster locknut - 20 to 25 Nm. 210 bar please consult our
mm (inch) technical department or use
the steel body option.
Cartridge only
Basic Code
1LR300 Installation drawing
1 1/4” Ports
Basic Code
1LR350
104
(4.09) 37.7
approx 8.00 (1.48)
208 (0.31)
(8.19)
max
2 80.00 2 104.0
(3.15) (4.09)
56.4 A/F
1 1
32.0
32.0 (1.26) (1.26) 63.50
(2.5)
1-5/8-12 UN-2A 65.00 (2.56)
76.2
(3.00) 2 holes Ø9.0 (0.35) thro’
70.0
(2.76)
Pressure (2)
Tank (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-47
1UAR100 - Relief valve
Spool, pilot operated, unloading
150L/min (40 USgpm) • 350 bar (5000 psi)
2 Operation Features
System pressure acts on the The main section then opens High accuracy of pilot
pilot section of the valve. fully with pilot flow passing operated design. Hardened
When the valve setting is through the vent port. When working parts give long,
reached, the pilot section the system pressure is reliable, trouble-free life.
opens and the pilot flow reduced to zero the valve will Cartridge construction for
causes the spool to move close. installation into your own
back uncovering the radial manifold.
1 vent port.
43 3
0 0
0 8 16 24 32 40
Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-48 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1UAR100 - Relief valve
Spool, pilot operated, unloading
150L/min (40 USgpm) • 350 bar (5000 psi)
1 2 3 4 5
1 1
19.00 10.00
17.0 A/F (0.75) (0.39)
19.00
(0.75)
50.80 38.10
(2.00) (1.50)
1-14 UNS-2A 1 1
31.8 6.3
(1.25) (0.25) 38.1 50.8
50.8 (1.50) (2.00)
(2.00)
38.0 (1.5)
25.4
(1.00) 7.9 (0.31) 60.3
(2.37)
Pressure (1) 50.8 2 holes
76.2
(2.00) Ø10.3 (0.41)
thro’ (3.00)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-49
1GR30 - Relief valve
Spool, direct acting
30 L/min (8 USgpm) • 160 bar (2300 psi)
2 Operation Features
The valve is held closed by the Stable, quiet operation.
spring until pressure on the Cartridge construction
piston overcomes the valve gives maximum flexibility
setting, allowing relief flow to in mounting. Offering good
tank through a ring of radial repeatability and reseat.
holes.
1
Sectional view Performance data
Ratings and specifications
Figures based on: Oil Temp = 40°C Viscosity = 32 cStt (150 SUS)
Rated flow 30 L/min (8 USgpm)
Max setting 160 bar (2300 psi)
Cartridge material Working parts hardened and ground steel.
External surfaces zinc plated.
Body material Standard aluminium (up to 210 bar*).
E Add suffix “377” for steel option.
Mounting position Unrestricted
Cavity A881 (See Section M)
Torque cartridge into cavity 60 Nm (44 lbs ft)
Weight 1GR30 0.31 kg (0.7 lbs)
1GR35 0.54 kg (1.2 lbs)
1GR36 0.91 kg (2.0 lbs)
Seal kit SK190 (Nitrile)
SK190V (Viton®)
Recommended filtration level BS5540/4 Class 18/13 (25 micron nominal)
Tank (2) Operating temp -30° to +90°C (-22° to +194°F )
Leakage 15 milliliters/min nominal
Nominal viscosity range 5 to 500 cSt
Viton is a registered trademark of E.I. DuPont
Pressure (1)
Pressure - bar
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-50 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1GR30 - Relief valve
Spool, direct acting
30 L/min (8 USgpm) • 160 bar (2300 psi)
1 2 3 4 5
1 3 4 Pressure range
Basic code Port size
1GR30 - Cartridge Only Note: Code based on
Code Port size Housing number - body only pressure in bar.
1GR35 - Cartridge and Body Aluminium Aluminium Steel 7- 7-70 bar.
1GR36 - Cartridge and Body 1GR35 1GR36 1GR36
Std setting 35 bar
Through Ported 3W 3/8” BSP C1084 16 - 14-160 bar.
4W 1/2” BSP B4851 C1044 C593 Std setting 155 bar
2 Adjustment means 6W 3/4” BSP B3954 C1086 C4917 Std setting made at 4.8 L/min
P- Leakproof Screw 6T 3/8” SAE B10784
Adjustment 8T 1/2” SAE C7140 5 Seals
R - Handknob Adjustment
12T 3/4” SAE B10506 B10742 S- Nitrile (For use with
G - Tamperproof Cap
most industrial
(See page E-7 for dimensions)
hydraulic oils)
SV - Viton (For high E
temperature and most
special fluid applications)
Dimensions
mm (inch)
Cartridge only
Basic Code
1GR30
Complete valve 2 holes 25.4 (1.00)
Hex socket adjust 3/8”, 1/2”, 3/4” Ports Ø8.7 (0.34) thro’
4.0A/F
Basic Code
1GR36
12.7
(0.50)
17.0 A/F
146.0
2 (5.75)
71.4 max
54.0 92.0 (2.81)
(2.13) 28.5 A/F (3.62) 35.0
max (1.38)
1 1
31.8
(1.50) 6.3
50.8 (0.25) 38.1
(2.00) (1.50)
50.8 (2.00)
1-14 UNS-2A
Complete Valve
1/2”, 3/4” Ports
Basic Code
1GR35
38.1
56.7 (1.50)
(2.23) 130.0
(5.12)
max 2
76.2
(3.00)
Tank (2)
1
28.5
(1.12) 15.9
44.5 (0.63)
Pressure (1) (1.75)
31.8
(1.25)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-51
1GR60 - Relief valve
Spool, direct acting
60 L/min (16 USgpm) • 40 bar (600 psi)
2 Operation Features
The valve is held closed by the Stable, quiet operation.
spring until pressure on the Cartridge construction
piston overcomes the valve gives maximum flexibility
setting, allowing relief flow to in mounting. Offering good
tank through a ring of radial repeatability and reseat.
holes.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-52 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1GR60 - Relief valve
Spool, direct acting
60 L/min (16 USgpm) • 40 bar (600 psi)
1 2 3 4 5
1 4 Pressure range
Function
1GR60 - Cartridge Only 3 Port sizes Note: Code based on
pressure in bar.
1GR65 - Cartridge and Body Code Port size Housing number - body only
2- 5-20 bar.
1GR66 - Cartridge and Body Aluminium Steel Aluminium Steel Std setting 20 bar
Through Ported
1GR65 1GR65 1GR66 1GR66 16 - 14-160 bar.
3W 3/8” BSP A13758 A13615 Std setting 28 bar
2 Adjustment means 4W 1/2” BSP A8532 B13011 B13473 Std setting made at 14 L/min
P- Leakproof Screw 6T 3/8” SAE A10780
Adjustment 8T 1/2” SAE A10781 A11798 B10783 B13477 5 Seals
R - Handknob Adjustment
G - Tamperproof Cap S- Nitrile (For use with
(See page E-7 for dimensions) most industrial
hydraulic oils)
SV - Viton (For high E
temperature and most
Dimensions special fluid applications)
mm (inch)
Cartridge only
Complete valve
Basic Code Hex socket adjust
1GR60 4.0 A/F 3/8”, 1/2” Ports
Basic Code
1GR65
17.0 A/F
15.5
(0.61) 107.0
(4.21)
max
55.0 45.0 2
(2.17) (1.77)
52.0
(2.05) 24.0 A/F
1
max
15.9
(0.63) 10.0
31.8 (0.39)
(1.25)
35.0
1 hole Ø9.0 (0.35) thro’ (1.38) 50.8
(2.00)
Complete valve
1/2” Ports
M20 x 1.5-6g 7.0 (0.28) 36.5 (1.44)
Basic Code
1GR66
31.0
(1.22) 15.5
(0.61)
117.0
Tank (2) 31.0 2 (4.61)
(1.22) max
49.0
65.0 (1.90)
(2.56)
1 1
2 mounting
Pressure (1) holes Ø9.0
(0.35) thro’
35.0 25.4
50.8 (1.00)
(2.00) 1.38)
50.8
(2.00)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-53
1GR100 - Relief valve
Spool, direct acting
150 L/min (40 USgpm) • 40 bar (600 psi)
2 Operation Features
The valve is held closed by the Stable, quiet operation.
spring until pressure on the Cartridge construction
piston overcomes the valve gives maximum flexibility
setting, allowing relief flow to in mounting. Offering good
tank through a ring of radial repeatability and reseat.
holes.
145 10
0 0
0 8 16 24 32 40
Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-54 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1GR100 - Relief valve
Spool, direct acting
150 L/min (40 USgpm) • 40 bar (600 psi)
1 2 3 4 5
1 4 Pressure range
Basic code
3 Port size @ 4.8 l/min
1GR100 - Cartridge Only
1GR145 - Cartridge and Body Note: Code based on
Code Port size Housing number - body only pressure in bar.
1GR150 - Cartridge and Body
0.6 - 0.3-6 bar.
Through Ported Aluminium Aluminium Steel Aluminium Steel
1GR145 1GR150 1GR150 1GR155 1GR155 Std setting 6 bar
1GR155 - Cartridge and Body 2- 5-25 bar.
Through Ported 3W 3/8” BSP C1084
Std setting 20 bar
4W 1/2” BSP B4851 C1044 C593 4- 5-40 bar.
2 Adjustment means 6W 3/4” BSP B3954 C1086 C4917 Std setting 28 bar
P- Leakproof Screw 8W 1” BSP B1617 B4596 Std setting made at 4.8 L/min
Adjustment 6T 3/8” SAE B10784
R - Handknob Adjustment 8T 1/2” SAE C7140 5 Seals
G - Tamperproof Cap
(See page E-7 for dimensions) 12T 3/4” SAE B10506 B10742 S- Nitrile (For use with E
16T 1” SAE B1037 B24040 most
industrial hydraulic oils)
SV - Viton (For high
Dimensions temperature and most
special fluid applications)
mm (inch)
Note: For applications above 210
Cartridge only bar, please consult our technical Complete valve
department or use the steel body 1/2”, 3/4” Ports
Basic Code option. Basic Code 38.1
1GR100 (1.50)
1GR145 130.0
Hex socket adjust (5.12)
4.0A/F max 2
76.2
(3.00)
1
28.5
(1.12) 15.9
17.0 A/F 44.5 (0.63)
(1.75)
31.8
(1.25)
54.0 2 holes 25.4 (1.00)
(2.13) 28.5 A/F Complete valve Ø8.7 (0.34) thro’
max 3/8”, 1/2”, 3/4” Ports
Basic Code
12.7
1GR150 (0.50)
146.0
2 (5.75)
71.4 max
92.0 (2.81)
(3.62) 35.0
1-14 UNS-2A (1.38)
1 1
31.8
(1.50) 6.3
50.8 (0.25) 38.1
(2.00) (1.50)
50.8 (2.00)
38.0 (1.50)
56.7
(2.23) Complete valve
1” Ports 32.0
(1.26)
Basic Code
2
1GR155 154.0
(6.06) 49.2
76.0 max (1.94)
100.0 (2.99)
Tank (2) (3.94)
1 1
25.4
50.8 (1.00) 60.3
Pressure (1) (2.00) 7.9 (0.31) (2.37)
2 holes Ø10.3 (0.41) thro’ 76.2 (3.00)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-55
1VR100 - Relief valve
Spool, ventable, pilot operated
100 L/min (26 USgpm) • 350 bar (5000 psi)
2 Operation Features
When inlet pressure exceeds When ‘vented’, pilot flow is High accuracy of pilot
the setting of the valve, the referenced directly to tank, operated design. Hardened
pilot section opens. The bypassing the pilot section. working parts give long,
pilot flow causes a pressure This flow through the vent reliable, trouble-free life.
imbalance across the main causes a pressure imbalance, Ventable for versatility
section spool causing it to opening the main section of application. Cartridge
3 open, allowing relief flow to and dumping the pump at construction for installation
tank. minimum pressure drop. into your own manifold.
1
Pressure - psi
Pressure - psi
Pressure - bar
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-56 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1VR100 - Relief valve
Spool, ventable, pilot operated
100 L/min (26 USgpm) • 350 bar (5000 psi)
1 2 3 4 5
1 4 Pressure range
Function
3 Port size @ 14 l/min
1VR100 - Cartridge Only
1VR150 - Cartridge and Body Note: Code based on
Code Port size Housing number - body only pressure in bar.
20 - 10-210 bar.
Aluminium Steel
2 Adjustment means Std setting 100 bar
6W 3/4’’ BSP B4377 B4378 35 - 30-350 bar.
P- Leakproof Screw 12T 3/4’’ SAE B10785 B11554 Std setting 210 bar
Adjustment Std setting made at 14 L/min
G - Tamperproof Cap
(See page E-7 for dimensions)
5 Seals
S - Nitrile (For use with most
industrial hydraulic oils)
SV - Viton (For high E
temperature and most
special fluid applications)
Dimensions
mm (inch)
Tank (2)
Pressure (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-57
1VR200 - Relief valve
Spool, ventable, pilot operated
200 L/min (52 USgpm) • 350 bar (5000 psi)
2 Operation Features
When inlet pressure exceeds When ‘vented’, pilot flow is High accuracy of pilot
the setting of the valve, the referenced directly to tank, operated design. Hardened
pilot section opens. The bypassing the pilot section. working parts give long,
pilot flow causes a pressure This flow through the vent reliable, trouble-free life.
imbalance across the main causes a pressure imbalance, Ventable for versatility
section spool causing it to opening the main section of application. Cartridge
3
open, allowing relief flow to and dumping the pump at construction for installation
1 tank. minimum pressure drop. into your own manifold.
4350
Pressure - psi
1086 75
Pressure - bar
Pressure - bar
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-58 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1VR200 - Relief valve
Spool, ventable, pilot operated
200 L/min (52 USgpm) • 350 bar (5000 psi)
1 2 3 4 5
1 Function 5 Seals
1VR200 - Cartridge Only 3 Port size S - Nitrile (For use with most
industrial hydraulic oils)
1VR250 - Cartridge and Body
Code Port size Housing number - body only SV - Viton (For high
temperature and most
Aluminium Steel
2 Adjustment means special fluid applications)
8W 1” BSP B3496 B3497
P- Leakproof Screw
16T 1” SAE B6807 B11555
Adjustment
G - Tamperproof Cap
(See page E-7 for dimensions)
4 Pressure range @ 14 l/min
Note: Code based on pressure in bar.
20 - 10-210 bar. Std setting 100 bar
35 - 30-350 bar. Std setting 210 bar
Std setting made at 14 L/min
E
Dimensions
mm (inch) Complete valve
3/4” Ports
Cartridge only Basic Code
Basic Code 1VR250
1VR200 Hex Socket
Adjust 4.0 A/F
20.0
(0.79)
17.0 A/F 3
155.5 58.0 80.0
(6.12) (2.28) (3.15)
40.5 100.0
max 115.0 (3.94) 2
(1.59)
max 38.0 A/F (4.53)
2 holes
Ø9.0
12.0 1 (0.35) thro’
25.4 (0.47)
(1.00) 44.0 (1.73)
50.8 (2.00) 68.0 (2.68)
1-5/16-12 UN-2A
76.2 (3.00)
Tank (2)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-59
1UL60 - Relief/unloading valve
Spool, pilot operated
60 L/min (16 USgpm) • 350 bar (5000 psi)
2 Operation Features
Inlet pressure is seen on the The ratio between the pilot Valves are available as
nose of the valve and system piston diameter and the seat cartridges for installation into
3 pressure (downstream of the diameter to the relief valve pilot special line bodies or into
system check valve) operates section ensures that the valve custom designed Hydraulic
on the system pilot port. When will be maintained in the fully Integrated Circuits. (NOTE:
pressure rises to the valve open position until the system Provision must be made for
setting, the relief section opens pressure drops to approximately a system check valve and a
and the system pressure acts on 85% of the unload pressure. pilot line to signal the system
1
the pilot piston to hold the valve pressure). Valve assemblies
in the open position. can be supplied complete in a
line body for use in accumulator
circuits. Bodied valves include
a check valve and the required
connection from the system to
the valve pilot port.
Sectional view Performance data
E Figures based on: Oil Temp = 40° C Viscosity = 32 cSt (150 SUS)
Rated flow 60 L/min (16 USgpm)
Max setting 350 bar (5000 psi)
Differential Unload/Reload 10-15%
Cartridge material Working parts hardened and ground steel.
External surfaces zinc plated.
Body material Standard steel
Mounting position Unrestricted
Cavity number A3146 (See Section M)
Torque cartridge into cavity 75 Nm (55 lbs ft)
Pilot (3) Weight 0.46 kg (1.01 lbs)
Seal kit number SK451 (Nitrile), SK451V (Viton®)
Recommended filtration level BS5540/4 Class 18/13 (25 micron nominal)
Operating temp -30° to +90°C (-22° to +194°F)
Tank (2) Leakage 35 milliliters/min nominal
Nominal viscosity range 5 to 500 cSt
Viton is a registered trademark of E.I. DuPont
Inlet (1)
- bar
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-60 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1UL60 - Relief/unloading valve
Spool, pilot operated
60 L/min (16 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
1 3 5 Seals
Function Port size
1UL60 - Cartridge only S - Nitrile (for use with most
Code Port size Housing number - body only
industrial hydraulic oils)
1UL65 - Cartridge and body Aluminium Steel SV - Viton (For high
4W 1/2” BSP BXP24103-4W-S-377 temperature and most
2 Adjustment means 8T 1/2” SAE BXP24103-8T-S special fluid applications)
P- Leakproof screw
adjustment 6 Body material
G - Tamperproof cap 4 Pressure range @ 4.8 l/min 377 - Steel
(See page E-7 for dimensions) Omit for aluminium (up to 210 bar)
Note: Code based on pressure in bar.
10 - 40-100 bar. Std setting 75 bar
35 - 15-350 bar. Std setting 200 bar
20 - 70-210 bar. Std setting 100 bar
E
Dimensions
mm (inch)
3
19.0
38.1 (0.75) 35.0 (1.38)
(1.50) 3CA80-1.5S
1-1/8-12 UNF-2A 56.7 (2.23)
76.0 (2.99)
Pilot (3) 3
Note: For applications above 210
bar (3000 psi) please consult
59.5 over technical department or
(2.34) use the steel body option. 2 (System)
Tank (2)
1
Inlet (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-61
1PUL60 - Relief/unloading valve
Spool, pilot operated
60 L/min (16 USgpm) • 350 bar (5000 psi)
3 2 Operation Features
Inlet pressure is seen on the The ratio between the pilot Valves are available as
nose of the valve and system piston diameter and the seat cartridges for installation into
pressure (downstream of the diameter to the relief valve pilot special line bodies or into
system check valve) operates section ensures that the valve custom designed Hydraulic
on the system pilot port. When will be maintained in the fully Integrated Circuits. (NOTE:
pressure rises to the valve open position until the system Provision must be made for
setting, the relief section opens pressure drops to approximately a system check valve and a
and the system pressure acts on 85% of the unload pressure. pilot line to signal the system
1
the pilot piston to hold the valve pressure). Valve assemblies
in the open position. can be supplied complete in a
line body for use in accumulator
circuits. Bodied valves include
a check valve and the required
connection from the system to
the valve pilot port.
Sectional view Performance data
Ratings and specifications
E Figures based on: Oil Temp = 40° C Viscosity = 32 cSt (150 SUS)
Rated flow 60 L/min (16 USgpm)
Max setting 350 bar (5000 psi)
Differential Unload/Reload 10-15%
Cartridge material Working parts hardened and ground steel.
External surfaces zinc plated.
Body material Standard steel
Mounting position Unrestricted
Cavity number A12088 (See Section M)
Pilot (4)
Torque cartridge into cavity 75 Nm (55 lbs ft)
Weight 1PUL60 0.46 kg (1.01 lbs)
1PUL65 0.8 kg (1.76 lbs)
Drain (3) Seal kit number 1PUL60 SK750 (Nitrile), SK750V (Viton®)
Recommended filtration level BS5540/4 Class 18/13 (25 micron nominal)
System (2) Operating temp -30° to +90°C (-22° to +194°F)
Leakage 35 milliliters/min nominal
Nominal viscosity range 5 to 500 cSt
Inlet (1) Viton is a registered trademark of E.I. DuPont
- bar
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-62 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1PUL60 - Relief/unloading valve
Spool, pilot operated
60 L/min (16 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
1 Function 5 Seals
1PUL60 - Cartridge only 3 Port sizes S- Nitrile (for use with
1PUL6 - Cartridge and body Code Port size Housing number - Sub Assembly most
Aluminium Steel
industrial hydraulic oils)
SV - Viton (For high
2 Adjustment means 4W 1/2” BSP BXP4046-4W-S-377 temperature and
P- Leakproof screw 8T 1/2” SAE BXP24046-8T-S most special fluid
adjustment applications)
G - Tamperproof cap
(See page E-7 for dimensions) 4 Pressure range @ 4.8 L/min 6 Body material
Note: Code based on pressure in bar. 377 - Steel
10 - 40-100 bar. Std setting 75 bar Omit for aluminium (up to 210 bar)
20 - 70-210 bar. Std setting 100 bar
35 - 50-350 bar. Std setting 200 bar E
Dimensions Note: For applications above 210
bar (3000 psi) please consult over
mm (inch) technical department or use the
steel body option.
Cartridge only
Basic Code
1PUL60 Cartridge only
1/2” Ports
Hex socket adjust Basic Code
4.0 A/F
1PUL65
With System Check
2 holes 1PUL60-P-*-S
Ø9.0 (0.35)
thro’
17.0 A/F
43.5 10.0 30.0
55.0 (1.71) (0.39) (1.18)
(2.17)
max 168
33.3 A/F 4 (6.61)
78.0 2 approx
(3.07) 95.0 115.0
(3.74) (4.53)
1
3
System (2)
1 4
Inlet (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-63
1PUL200 - Relief/unloading valve
Spool, pilot operated
200 L/min (52 USgpm) • 350 bar (5000 psi)
3 2 Operation Features
Inlet pressure is seen on the The ratio between the pilot Valves are available as
nose of the valve and system piston diameter and the seat cartridges for installation into
pressure (downstream of the diameter to the relief valve pilot special line bodies or into
system check valve) operates section ensures that the valve custom designed Hydraulic
on the system pilot port. When will be maintained in the fully Integrated Circuits. (NOTE:
pressure rises to the valve open position until the system Provision must be made for
setting, the relief section opens pressure drops to approximately a system check valve and a
and the system pressure acts on 85% of the unload pressure. pilot line to signal the system
1
the pilot piston to hold the valve pressure). Valve assemblies
in the open position. can be supplied complete in a
line body for use in accumulator
circuits. Bodied valves include
a check valve and the required
connection from the system to
the valve pilot port.
Sectional view Performance data
Ratings and specifications
Figures based on: Oil Temp = 40° C Viscosity = 32 cSt (150 SUS)
E Rated flow 200 L/min (52 USgpm)
Max setting 350 bar (5000 psi)
Differential unload/reload 10-15%
Cartridge material Working parts hardened and ground steel.
External surfaces zinc plated.
Body material Standard steel
Mounting position Unrestricted
Cavity number A3145 (See Section M)
Pilot (4) Torque cartridge into cavity 100 Nm (73 lbs ft)
Weight 1PUL200 0.74 kg (1.63 lbs)
Drain (3) 1PUL250 6.8 kg (14.96 lbs)
Seal kit number 1PUL200 SK670 (Nitrile) SK670V (Viton®)
1PUL250 SK452 (Nitrile) SK452V (Viton)
Recommended filtration level BS5540/4 Class 18/13 (25 micron nominal)
Operating temp -30°C to +90°C (-22° to 194°F)
Outlet (2) Leakage 35 milliliters/min @ 210 bar
Nominal viscosity range 5 to 500 cSt
Viton is a registered trademark of E.I. DuPont
Inlet (1)
- bar
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-64 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1PUL200 - Relief/unloading valve
Spool, pilot operated
200 L/min (52 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
1 Basic code
1PUL200 - Cartridge only 3 Port sizes - Bodied valves only
1PUL250 - Cartridge and body Code Port size Housing number - Sub assembly
Aluminium Steel
2 Adjustment means 8W 1” BSP 1/4” BSP Drain Port BXP23466-8W-S-377
P - Leakproof screw 16T 1” SAE 1/4” SAE Drain Port BXP23466-16T-S BXP23466-16-S-377
adjustment
G - Tamperproof cap 4 Pressure Range 5 Seals 6 Body material
(See page 12-102 for @ 4.8 L/min
dimensions) S - Nitrile (For use with most 377 - Steel
Note: Code based on industrial hydraulic oils) Omit for aluminium (up to
pressure in bar. SV - Viton (For high 210 bar)
20 - 30-210 bar. temperature and most
Std setting 100 bar
35 - 50-350 bar.
special fluid E
applications)
Std setting 200 bar
Cartridge only 4
1 3
17.0 A/F
3
2
189.0
1-5/16-12 UNS (7.44)
max 122.0
140.0 (4.80) 1
(5.51) G
4
100.0
Pilot (4) (3.94) 9.0 6.0 (0.24)
(0.35) max
max
81.0 25.4 (1.00) 30.0 (1.18)
(3.19) Drain (3) 50.8 (2.00) 2 holes 71.6 (2.82)
Ø11.0
(0.43) thro’ 101.6 (4.00)
Outlet (2)
Inlet (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-65
1CLLR50 - Dual relief valve
Poppet, direct acting, differential area
50 L/min (12 USgpm) • 250 bar (3500 psi)
1 Operation Features
Pressure acts over one of two This being a single cartridge is Single cartridge relieving in
differential areas forcing the ideal for mounting on to a motor both directions cutting down
poppet back allowing relief flow in a special housing. space requirements, giving full
to the other port. adjustment through its range
on both pressures at the same
time.
2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-66 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1CLLR50 - Dual relief valve
Poppet, direct acting, differential area
50 L/min (12 USgpm) • 250 bar (3500 psi)
1 2 3 4 5 6
Dimensions
mm (inch)
Complete valve
Cartridge only 3/8”, 1/2” Ports
Basic code Basic Code
1CLLR50 1CLLR55
Screw in to increase pressure setting
Screw out to decrease pressure setting 50.80 (2.31)
67.4
(2.65)
22.20 A/F hex
18.50
2 38.10 (0.73)
(1.5) 50.80
7.10 1 (2.00)
67.4 25.20 A/F hex
(2.65) (0.28) 16.00
19.10 (0.63)
3.15 (0.75)
(0.12) 31.80
(1.25)
41.30 (1.63)
33.00
(1.30)
2 (P)
1 (P)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-67
1CLLR100 - Dual relief valve
Poppet, direct acting, differential area
150 L/min (40 USgpm) • 350 bar (5000 psi)
1 Operation Features
Pressure acts over one of two This being a single cartridge is Single cartridge relieving in
differential areas forcing the ideal for mounting on to a motor both directions cutting down
poppet back allowing relief flow in a special housing. space requirements, giving full
to the other port. adjustment through its range
on both pressures at the same
time.
2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-68 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1CLLR100 - Dual relief valve
Poppet, direct acting, differential area
150 L/min (40 USgpm) • 350 bar (5000 psi)
1 2 3 4 5
Dimensions
mm (inch)
Cartridge only
Basic Code
Hex socket adjust
Complete valve 38.1 (1.50)
1CLLR100 3/4”. 1” Ports
5.0 A/F
Basic Code
1CLLR150
25.4
(1.00)
134.0
(5.28)
max
60.3
(2.37) 2 2 73.0
(2.87)
67.0 25.4 A/F
(2.64) 21.5 1
max (0.85) 12.7
(0.50) 51.0
29.4 (2.00)
(1.16)
76.2 (3.00)
50.8
(2.00) 2 holes Ø10.5 (0.41) thro’
Complete valve
7/8-14 UNF-2A 3/4” Ports
Basic Code 2 holes
1CLLR155 Ø9.0 (0.35)
thro’
38.0
(1.50)
2 72.0 157.0
(2.83) 2 2 (6.18)
max
98.0
(3.86)
20.0 44.5 1
(0.79) 1
1 (1.75)
29.0
Note: Tightening torque of ”F” Note: For applications above 210 (1.14) 13.0
adjuster locknut - 20 to 25 Nm bar please consult our technical (0.51) 51.0 (2.00)
department or use the steel body
option. 50.8 (2.00) 76.2 (3.00)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-69
PSV2-8 - Pressure sequence valve
Spool, direct acting normally closed, internal drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
2 Operation Features
When a pre-set pilot pressure When the pilot pressure falls Cartridge design enabling
is reached the spool moves the valve will return to its speedy servicing when
back against the spring normal position. mounted in a body or in a
opening the line between inlet composite manifold.
1 and outlet.
200 14
100 7
0 0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120ºF)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-70 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PSV2-8 - Pressure sequence valve
Spool, direct acting normally closed, internal drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9
(1.61) 63.5
2 (2.50)
1
Ø 14,2 (0.559)
Ø 15,8 (0.622)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-71
PSV4-8 - Pressure sequence valve
Spool, direct acting normally closed, internal drain
15 L/min (4 USgpm) • 350 bar (5000 psi)
2 Operation Features
When a pre-set pilot pressure When the pilot pressure falls Cartridge design enabling
is reached the spool moves the valve will return to its speedy servicing when
back against the spring normal position. mounted in a body or in a
opening the line between inlet composite manifold. Working
1 and outlet. pressure 350 bar.
200 14
100 7
0 0
0 1 2 3 4
Flow in USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-72 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PSV4-8 - Pressure sequence valve
Spool, direct acting normally closed, internal drain
15 L/min (4 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9
12,7 76.7
(0.50) 19.1 (3.02)
hex (0.75)
76,5 15.5 19.1
68,3 79,2 (0.61) (0.75)
(2.68) (3.02)
53,8 (3.12)
71,3 Full 3
(2.13)
(2.81) out 54 2
(2.12) 2x7.14
Full (0.281)
22,2 66.7
out (2.13) 29.8
(0.87)
hex 1 (1.17)
3.4 56.9
(0.13) (2.24)
63.5
0.750" 3 (2.50)
40,9
-16Thd.
(1.61)
2
1
Ø 14,2 (0.559)
Ø 15,8 (0.622)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-73
PSV8-10 Pressure sequence valve
Spool direct acting, normally open, external drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
Operation Features
2 When a pre-set pilot pressure When the pilot pressure falls Cartridge design enabling
is reached the spool moves the valve will return to its speedy servicing when
back against the spring closing normal position. mounted in a body or in a
the line between inlet and composite manifold.
outlet.
1
3
Caution
When sudden pressure or velocity is applied at port 1,
2 an orifice disc may be required.
3
40
30 2
20
1
10
0 0
0 1 2 3 4 5 6
Flow in USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-74 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PSV8-10 Pressure sequence valve
Spool direct acting, normally open, external drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-75
PSV10-10 - Pressure sequence valve
Spool direct acting, normally open, external drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
2 Operation Features
When a pre-set pilot pressure When the pilot pressure falls Cartridge design enabling
is reached the spool moves the valve will return to its speedy servicing when
back against the spring normal position. mounted in a body or in a
opening the line between inlet composite manifold.
1 and outlet.
3
40
30 2
20
1
10
0 0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-76 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PSV10-10 - Pressure sequence valve
Spool direct acting, normally closed, external drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8
1
Ø 15,80 (0.622)
Ø 17,40 (0.685)
Ø 19.00 (0.748)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-77
PSV2-10 - Pressure sequence valve
Spool, direct acting, normally closed, internal drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
2 Operation Features
When a pre-set pilot pressure When the pilot pressure falls Cartridge design enabling
is reached the spool moves the valve will return to its speedy servicing when
back against the spring normal position. mounted in a body or in a
opening the line between inlet composite manifold.
1 and outlet.
20
1
0 0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-78 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PSV2-10 - Pressure sequence valve
Spool, direct acting, normally closed, internal drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8
"K"Adjustm ent
"F"Adjustm ent Ø 38,1 (1.50) 83.8
"I"Adjustm ent
(3.30)
22.4
85,0 (0.88)
25,4 (3.34)
(1.0)
hex
58,0 3
(2.28) 63.5 2X7,14
19.1 2 (0.281) 75,4
(2.50)
(0.25) (2.97)
25,4 (1.0)hex 35.1
1 (1.38)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-79
PSV4-10 - Pressure sequence valve
Spool, direct acting, normally closed, internal drain
15 L/min (4 USgpm) • 210 bar (3000 psi)
2 Operation Features
When a pre-set pilot pressure When the pilot pressure falls Cartridge design enabling
is reached the spool moves the valve will return to its speedy servicing when
back against the spring normal position. mounted in a body or in a
opening the line between inlet composite manifold.
1 and outlet.
2
20
1
0 0
0 1 2 3 4
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-80 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PSV4-10 - Pressure sequence valve
Spool, direct acting, normally closed, internal drain
15 L/min (4 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9
Dimensions
mm (inch)
"S"Adjustm ent
Cartridge only 4,8 (0.18)hex
"C"Adjustm ent
Installation drawing (aluminum)
"F"Adjustm ent
"I"Adjustm ent
85,0 "K"Adjustm ent
(3.34) Ø 38,1 (1.50) 83.8
(3.30)
24,6
(0.97)
58,0
25,4
(2.28) (1.0) 3
2X7,14
hex
18,8 57.2 2 (0.281) 75,4
25,4
(.74) (2.25) (2.97)
(1.0) 34,8
hex 1 (1.37)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-81
PSV1-10 - Pressure sequence valve
Spool, direct acting, normally closed, internal pilot, external drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
2 Operation Features
In the normal condition port 2 is When the pressure on port 1 Cartridge design enabling
open to the tank port 3 and port exceeds the setting of the valve speedy servicing when
1 is blocked. port 1 opens to port 2 and port mounted in a body or in a
3 is blocked but must always be composite manifold.
referenced to tank.
3 1
3
effects are negated. In the 40
valves normal position the
outlet is drained to tank. 2
20
1
0 0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-82 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PSV1-10 - Pressure sequence valve
Spool, direct acting, normally closed, internal pilot, external drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8
1
Ø15,80 (0.622)
Ø17,40 (0.685)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-83
PSV5-10 - Pressure sequence valve
Spool, direct acting, normally closed, internal pilot, external drain
8 L/min (2 USgpm) • 210 bar (3000 psi)
2 Operation Features
In the normal condition port 2 When the pressure on port Cartridge design enabling
is open to the tank port 3 and 1 exceeds the setting of the speedy servicing when
port 1 is blocked. valve port 1 opens to port 2 mounted in a body or in a
and port 3 is blocked but must composite manifold.
always be referenced to tank.
3 1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-84 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PSV5-10 - Pressure sequence valve
Spool, direct acting, normally closed, internal pilot, external drain
8 L/min (2 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9
Dimensions
mm (inch)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-85
PSV3-10 - Pressure sequence valve
Spool, direct acting, normally closed, internal or external pilot/drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
2 Operation Features
The valve is normally closed When port 3 is pressurized the Stable, quiet operation.
until a pre-determined spool shifts to allow flow from Cartridge construction
pressure is applied to port port 2 to port 1. gives maximum flexibility
1. The spool then shifts and in mounting. Offering good
allows flow from port 1 to repeatability and reseat.
port 2.
3 1
0 0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°C)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-86 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PSV3-10 - Pressure sequence valve
Spool, direct acting, normally closed, internal or external pilot/drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8
"F"Adjustm ent
1
Ø 15,82 (0.623)
Ø 17,42 (0.686)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-87
PSV7-10 - Pressure sequence valve
Spool, direct acting, normally closed, internal pilot, external drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
2 Operation Features
As with the direct acting relief Stable, quiet operation.
valves, when the pressure Cartridge construction
exceeds the spring force, the gives maximum flexibility
spool moves back, opening in mounting. Offering good
3 the inlet to outlet. repeatability and reseat.
2
20
1
0 0
0 1 2 3 4 5 6
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-88 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PSV7-10 - Pressure sequence valve
Spool, direct acting, normally closed, internal pilot, external drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8
4 Adjustment
See section J for housing.
8
E
Special features
C- Cap
6 Sequence pressure 00 - None
F- Factory set
range (Only required if valve has
I- Internal
5 - 7-30 bar (100-450 psi) special features, omitted if
K- Knob Note: Code based on
10 - 14-65 bar (200-950 psi) ”00.”)
S- Screw pressure in psi.
18 - 20-125 bar (300-1800 psi) SS - 316 Stainless Steel
2 - 3,5-10 bar (50-150 psi)
external components
3 - 5-20 bar (75-300 psi)
"F"Adjustm ent
"K"Adjustm ent
"I"Adjustm ent Ø 38,1 (1.50)
83.8
80,0 (3.30)
24,6
(3.15) (0.97)
53,0 3
25,4 2X7,14
(2.08) 18,8 57.2 2 (0.281) 75,4
(1.0) 25,4 (.74) (2.25) (2.97)
hex (1.0) 34,8
hex 1 (1.37)
1
Ø 15,80 (0.622)
Ø 17,40 (0.685)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-89
1DS30 - Pressure sequence valve
Spool, direct acting, normally closed, internal pilot, external drain
30 L/min (8 USgpm) • 140 bar (2000 psi)
2 Operation Features
As with the direct acting relief Stable, quiet operation.
valves, when the pressure Cartridge construction
exceeds the spring force, the gives maximum flexibility
spool moves back, opening in mounting. Offering good
3 the inlet to outlet. repeatability and reseat.
Pressure - bar
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-90 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1DS30 - Pressure sequence valve
Spool, direct acting, normally closed, internal pilot, external drain
30 L/min (8 USgpm) • 140 bar (2000 psi)
1 2 3 4 5
Dimensions
mm (inch)
88.1 (3.49)
71.0 108.0 (4.25)
(2.80)
Sequenced (2)
Inlet (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-91
1DS60 - Pressure sequence valve
Spool. direct acting, normally closed, internal pilot, external drain
60 L/min (16 USgpm) • 40 bar (580 psi)
2 Operation Features
As with the direct acting relief Stable, quiet operation.
valves, when the pressure Cartridge construction
exceeds the spring force, the gives maximum flexibility
spool moves back, opening the in mounting. Offering good
3 inlet to outlet. repeatability and reseat.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-92 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1DS60 - Pressure sequence valve
Spool. direct acting, normally closed, internal pilot, external drain
60 L/min (16 USgpm) • 40 bar (580 psi)
1 2 3 4 5
3 114.0
17.0 A/F (4.49)
36.00 78.0 58.0 2 max
(1.42) (3.07) (2.28)
max 27.0 A/F
1
15.9
(0.63)
35.0
31.8 (1.38)
(1.25)
M22 x 1.5-6g 63.5
2 holes Ø9.0 (0.35) thro’ (2.50)
Complete valve
1/2” Ports
Drain (3) Basic Code
1DS66
7.0 (0.28) 36.5
53.5 (1.44) 2 holes
(2.10) Ø9.0 (0.35)
thro’
14.0
(0.55)
3
Sequenced (2)
42.0 118.0
(1.65) 2 (4.65)
25.0 66.0
(0.98) max (2.60) 82.0
(3.23)
Inlet (1) 1 1
25.4 35.0
(1.00) (1.38)
50.8 (2.00) 50.8 (2.00)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-93
1DS100 - Pressure sequence valve
Spool, direct acting, normally closed, internal pilot, external drain
150 L/min (40 USgpm) • 40 bar (600 psi)
2 Operation Features
As with the direct acting relief Stable, quiet operation.
valves, when the pressure Cartridge construction
exceeds the spring force, the gives maximum flexibility
spool moves back, opening the in mounting. Offering good
3 inlet to outlet. repeatability and reseat.
145 10
0 0
0 7.9 15.8 23.7 31.6 39.5
Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-94 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1DS100 - Pressure sequence valve
Spool, direct acting, normally closed, internal pilot, external drain
150 L/min (40 USgpm) • 40 bar (600 psi)
1 2 3 4 5
Dimensions
mm (inch)
50.8 38.1
1-14 UNS (2.00) (1.50)
88.1 (3.49)
108.0 (4.25)
71.0
(2.80)
Sequenced (2)
Inlet (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-95
1PS60 - Pressure sequence valve
Spool, pilot operated, normally closed, internal pilot, external drain
60 L/min (16 USgpm) • 350 bar (5000 psi)
2 Operation Features
As in the pilot operated relief, This pilot flow causes a pressure Hardened steel working parts
when the setting of the valve imbalance opening the main give long, trouble-free life.
is exceeded the pilot section section and allowing flow to a Selectively matched honed
opens. secondary circuit (sequenced line). assemblies give accurate
3 performance.
Inlet (1)
4350
Pressure - psi
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-96 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1PS60 - Pressure sequence valve
Spool, pilot operated, normally closed, internal pilot, external drain
60 L/min (16 USgpm) • 350 bar (5000 psi)
1 2 3 4 5
5 Seals
S - Nitrile (For use with most E
industrial hydraulic oils)
SV - Viton (For high
temperature and most
special fluid applications)
Dimensions Note: Tightening torque of ”F” Note: For applications above 210
adjuster locknut - 20 to 25 Nm bar please consult our technical
mm (inch) department or use the steel body
option.
53.5
(2.10)
Sequenced (2)
Inlet (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-97
1PS100 - Pressure sequence valve
Spool, pilot operated, normally closed, internal pilot, external drain
150 L/min (40 USgpm) • 350 bar (5000 psi)
2 Operation Features
As in the pilot operated relief, This pilot flow causes a pressure Hardened steel working parts
when the setting of the valve imbalance opening the main give long, trouble-free life.
is exceeded the pilot section section and allowing flow to a Selectively matched honed
opens. secondary circuit (sequenced line). assemblies give accurate
3 performance.
Inlet (1)
4350 300
drill circuit.
3625 250
2. Serve as a relief valve
where oil viscosity 2900 200
or restrictions in the 2175 150
downstream line would
cause excessive back 1450 100
pressure. The separate 725 50
spring chamber drain 0 0
makes the sequence valve 0 8 16 24 32 40
insensitive to this back
Flow - US gpm
pressure.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-98 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1PS100 - Pressure sequence valve
Spool, pilot operated, normally closed, internal pilot, external drain
150 L/min (40 USgpm) • 350 bar (5000 psi)
1 2 3 4 5
50.8 38.1
1-14 UNS (2.00) (1.50)
88.1 (3.49)
108.0 (4.25)
71.0
(2.80)
Sequenced (2)
Inlet (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-99
PSV1-16 - Pressure sequence valve
Spool, pilot operated, normally closed, internal pilot, external drain
95 L/min (25 USgpm) • 350 bar (5000 psi)
2 Operation Features
In the normal condition port 2 When the pressure on port Hardened steel working parts
is open to the tank port 3 and 1 exceeds the setting of the give long, trouble-free life.
port 1 is blocked. valve port 1 opens to port 2 Selectively matched honed
and port 3 is blocked but must assemblies give accurate
always be referenced to tank. performance.
3 1
60 4
3
40
2
20
1
0 0
0 5 10 15 20 25
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-100 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PSV1-16 - Pressure sequence valve
Spool, pilot operated, normally closed, internal pilot, external drain
95 L/min (25 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9
Dimensions
mm (inch)
Cartridge only
Installation drawing (Steel)
“S” Adjustm ent “C” Adjustm ent
6,35 (0.25)hex 19,1 (0.75)hex
“K” Adjustm ent
69.3
(2.73)
60,3
57,1 (2.37) 3
57,1 54.0
(2.25) (2.25) (2.13) 88.9 25.4
2 (3.50) (1.00)
38,1 108.0
(1.5) 2 X Ø 10.31 (4.25)
(0.406) 1
hex
25.4 12.7 76.20 25.4
1.312"-12 Thd. (1.00) (0.50) 101.6 (3.000) (1.00)
(4.00)
3
71,5
(2.81)
2 Torque cartridge in housing Warning
A - 108-122 Nm (80-90 ft. lbs) Aluminum housings can be
S - 136-149 Nm (100-110 ft. lbs) used for pressures up to 210
1 bar (3000 psi). Steel housings
must be used for operating
Ø 26,95 (1.061) pressures above 210 bar
Ø 28,55 (1.124) (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-101
1PS200 - Pressure sequence valve
Spool, pilot operated, normally closed, internal pilot, external drain
250 L/min (60 USgpm) • 350 bar (5000 psi)
2 Operation Features
As in the pilot operated relief, This pilot flow causes a pressure Hardened steel working parts
when the setting of the valve imbalance opening the main give long, trouble-free life.
is exceeded the pilot section section and allowing flow to a Selectively matched honed
opens. secondary circuit (sequenced line). assemblies give accurate
3 performance.
4350
Pressure - psi
300
2. Serve as a relief valve where 3625 250
oil viscosity or restrictions
in the downstream line 2900 200
would cause excessive back 2175 150
pressure. The separate spring
1450 100
chamber drain makes the
sequence valve insensitive to 725 50
this back pressure. 0 0
0 13 26 39 52 65
Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-102 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1PS200 - Pressure sequence valve
Spool, pilot operated, normally closed, internal pilot, external drain
250 L/min (60 USgpm) • 350 bar (5000 psi)
1 2 3 4 5
2 3
76.2 20.0
(3.00) (0.79)
1-5/16-12 UN-2A 58.0
(2.28)
2 holes
Ø8.5 (0.33) 115.0 (4.53)
thro’
80.0 Drain (3)
(3.15)
Sequenced (2)
Inlet (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-103
PSV11-16 - 16 -Pressure sequence valve
Spool, pilot operated, normally closed, internal pilot, external drain
230 L/min (60 USgpm) • 350 bar (5000 psi)
Operation Features
The PSV11-16 valve remains Hardened steel working parts
normally closed until a give long, trouble-free life.
predetermined pressure is Selectively matched honed
reached at port 1, which then assemblies give accurate
allows from to port 2 (port 3 performance.
must be vented).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-104 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PSV11-16 - 16 - Pressure sequence valve
Spool, pilot operated, normally closed, internal pilot, external drain
230 L/min (60 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9
Dimensions
mm (inch)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-105
1PSC30 - Pressure sequence valve
Poppet, direct acting, normally closed, internal pilot, external drain, reverse flow check
30 L/min (8 USgpm) • 350 bar (5000 psi)
2 Operation Features
As with the direct acting relief Match ground and honed Cartridge construction
valves, when the pressure hardened working parts gives maximum flexibility in
exceeds the spring force, the give long, trouble-free life. mounting. Steel valve bodies
spool moves back, opening the Consistent stable operation available on request.
inlet to outlet. providing low pressure rise due
to increasing flow.
3 1
Pressure - psi
Pressure - bar
Pressure - bar
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-106 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1PSC30 - Pressure sequence valve
Poppet, direct acting, normally closed, internal pilot, external drain, reverse flow check
30 L/min (8 USgpm) • 350 bar (5000 psi)
1 2 3 4 5
Dimensions
mm (inch)
9.0 11.5
(0.35) (0.45)
3
88.0 107.0
47.0 26.5 (3.46) (4.21)
(1.85) (1.04) 2
for max
25.4 A/F 42.0 fixed
max 60.0 (1.65)
28.0 max (2.36) ‘N’ adjust
for fixed 1
'N' adjust
16.0 9.0
(0.63) (0.35)
M20 x 1.5-6g 32.0
31.8
(1.25) (1.26)
63.5
(2.50)
Drain (3)
42.5 Note: For applications above
(1.67) Note: Tightening torque of ”F”
adjuster locknut - 20 to 25 Nm. 210 bar please consult our
Sequence (2) technical department or use
the steel body option.
Inlet (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-107
1PSC100 - Pressure sequence valve
Poppet, pilot operated, normally closed, internal pilot, external drain, reverse flow check
150 L/min (40 USgpm) • 350 bar (5000 psi)
2 Operation Features
As in the pilot operated relief, Match ground and honed Cartridge construction
when the setting of the valve hardened working parts gives maximum flexibility in
is exceeded the pilot section give long, trouble-free life. mounting. Steel valve bodies
opens. This pilot flow causes Consistent stable operation available on request.
a pressure imbalance opening providing low pressure rise due
the main section and allowing to increasing flow.
flow to a secondary circuit
3 1 (sequenced line).
180 12
Pressure - bar
Pressure - psi
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-108 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1PSC100 - Pressure sequence valve
Poppet, pilot operated, normally closed, internal pilot, external drain, reverse flow check
150 L/min (40 USgpm) • 350 bar (5000 psi)
1 2 3 4 5
50.8 38.1
(2.00) (1.50)
Drain (3)
88.1 (3.49)
108.0 (4.25)
1-14 UNS
71.0
(2.80)
Note: For applications above
210 bar please consult our
technical department or use
the steel body option.
Sequenced (2)
Inlet (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-109
1UPS100 - Pressure sequence valve
Spool, pilot operated, normally closed, internal pilot, external drain, unloading
150 L/min (40 USgpm) • 350 bar (5000 psi)
2 Operation Features
Inlet pressure acts on the pilot The main section then opens Hardened steel working parts
section of the valve. When the fully with pilot flow passing give long, trouble-free life.
valve setting is reached, the through the vent. The valve Selectively matched honed
pilot section opens and pilot remains open until flow to the assemblies give accurate
3 flow causes the spool to move sequenced port ceases and performance.
back uncovering the radial inlet pressure drops to zero.
vent port.
1
Inletl (1)
43.5 3
0 0
0 8 16 24 32 40
Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-110 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1UPS100 - Pressure sequence valve
Spool, pilot operated, normally closed, internal pilot, external drain, unloading
150 L/min (40 USgpm) • 350 bar (5000 psi)
1 2 3 4 5
Dimensions
mm (inch)
50.8 38.1
1-14 UNS (2.00) (1.50)
88.1 (3.49)
108.0 (4.25)
71.0
(2.80)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-111
PUV3-10 - Pilot unloading valve
Poppet, internal or external pilot operated, normally closed, unloading
4 L/min (1 USgpm) • 210 bar (3000 psi)
3 Operation Features
This valve blocks flow from The valve will reseat at a Hardened poppet and seat.
port 2 to port 3, until either percentage of the unloading Very low leakage when piloted
1 the predetermined spring setting as called out in the closed without exerting
setting has been reached, model code. This valve can excessive force on the seat.
or an external pilot has been be used alone for low flow
applied to port 1. At this time applications or used as the
flow is then allowed from pilot stage of a two-stage
port 2 to port 3. unloader valve (see application
2
example). The main stage
of the unloader is typically
a DPS2 logic element.
A 3 D - 90%
40
B
30 C
2
D
20
1
10
0 0
0 0.2 0.4 0.6 0.8 1.0
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-112 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PUV3-10 - Pilot unloading valve
Poppet, internal or external pilot operated, normally closed, unloading
4 L/min (1 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6 7 8 9
"C" Adjustment
"S" Adjustment
46,0
(1.81) 39,0
(1.53)
Maximum
Torque to 1,3 Nm
25,4 (1.0) hex (10 lbf ft)
0.875"-14 Thd.
3
46,0
(1.81)
2
1
Ø 15,82 (0.623)
Ø 17,42 (0.686)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-113
ADV1-16 - Accumulator discharge valve
Poppet, normally open, external pilot
30 L/min (8 USgpm) • 210 bar (3000 psi)
2
Operation Features
The valve remains open This holds pressure in port Hardened poppet and seat.
between port 1 and 2 until 1 until the pilot pressure is Very low leakage when piloted
3
sufficient pilot pressure is released allowing flow to take closed without exerting
applied to port 3. place from port 1 to 2. excessive force on the seat.
2500
Pressure Drop - psi
150
2000
1500 100
1000
50
500
0 0
0 2 4 6 8
Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-114 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
ADV1-16 - Accumulator discharge valve
Poppet, normally open, external pilot
30 L/min (8 USgpm) • 210 bar (3000 psi)
1 2 3 4 5 6
12,0
12.7 2X8.74 10.3
(0.47) (0.344)
(0.50) (0.41)
2
38,1 (1.50)hex 54 54
(2.12) (2.12)
114.3 93.68
(4.50) (3.68)
1
Ø 25,37 (0.999)
Ø 28,55 (1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-115
PRV1-10 - Pressure reducing/relieving valve
Spool, direct acting
15 L/min (4 USgpm) • 165 bar (2400 psi)
1 Operation Features
Normally open, the valve As in the other direct acting Hardened steel working parts
throttles or closes to maintain valves, the spring force holds are individually match ground
constant pressure in the the valve open. to assure long life, reliability
regulated line. and high accuracy.
3 2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-116 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PRV1-10 - Pressure reducing/relieving valve
Spool, direct acting
15 L/min (4 USgpm) • 165 bar (2400 psi)
1 2 3 4 5 6 7 8
46,0 3
(1.81)
2
1 Ø 15,80 (0.622)
Ø 17,40 (0.685)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-117
PRV2-10 - Pressure reducing/relieving valve
Spool, pilot operated
38 L/min (10 USgpm) • 240 bar (3500 psi)
1 Operation Features
This valve is normally open and preventing any further Cartridge construction with
allowing inlet oil to pass to the pressure rise in the regulated hardened, ground and honed
regulated line until the outlet line. If any external force working parts giving smooth,
(regulated) pressure exceeds causes the regulated pressure stable operation over all
the setting of the pilot section. to rise more than 5-10% above pressure ranges.
When this setting is achieved the setting, the main spool
a pilot flow occurs, causing a moves back further, opening
3 2 pressure imbalance across the the regulated port to the tank
main spool, which then moves line, thus working as a relief
throttling the inlet flow valve.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-118 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PRV2-10 - Pressure reducing/relieving valve
Spool, pilot operated
38 L/min (10 USgpm) • 240 bar (3500 psi)
1 2 3 4 5 6 7 8 9
"K" Adjustment
Dimensions Ø 38,1 (1.50)
mm (inch) "S" Adjustment
Cartridge only "C" Adjustment; Installation drawing (Steel)
19,1 (0.75) hex
"F" Adjustment
"I" Adjustment 19,1 80,0 83.8
(0.75) (3.30)
(3.15)
hex 35.1
(1.38)
53,0
3
(2.08) 63.5
2 19.1
(2.50) 76.2
25,4 2X Ø7.14 (0.75)
(1.0) (3.00)
(0.28) 1
hex
22.4 9.7 57.02 22.4
(0.88) (0.38) (2.245) (0.88)
76.2
0.875" -14 Thd. (3.00)
46,0 3
Warning
(1.81) Torque cartridge in housing
Aluminum housings can be
2 A - 47-54 Nm (35-40 ft. lbs) used for pressures up to 210 bar
S - 68-75 Nm (50-55 ft. lbs) (3000 psi). Steel housings must
1 be used for operating pressures
Ø 15,80 (0.622) above 210 bar (3000 psi).
Ø 17,40 (0.685)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-119
PRV12-10 - Pressure reduced/relieving valve
Spool, pilot operated
45 L/min (12 USgpm) • 350 bar (5000 psi)
1 Operation Features
This valve is normally open and preventing any further Cartridge construction with
allowing inlet oil to pass to the pressure rise in the regulated hardened, ground and honed
regulated line until the outlet line. If any external force working parts giving smooth,
(regulated) pressure exceeds causes the regulated pressure stable operation over all
the setting of the pilot section. to rise more than 5-10% above pressure ranges.
When this setting is achieved the setting, the main spool
a pilot flow occurs, causing a moves back further, opening
3 2 pressure imbalance across the the regulated port to the tank
main spool, which then moves line, thus working as a relief
throttling the inlet flow valve.
12 10 8 6 4 2 0 2 4 6 8 10 12
A - 50 spring
B - 33 spring Port 1 to 3 Port 2 to 1
C - 15 spring Flow - USgpm (105 SUS oil @ 120°F)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-120 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PRV12-10 - Pressure reduced/relieving valve
Spool, pilot operated
45 L/min (12 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9
46,0 3 Warning
(1.81) Aluminum housings can be used
2 for pressures up to 210 bar (3000
Torque cartridge in housing psi). Steel housings must be
A - 47-54 Nm (35-40 ft. lbs) used for operating pressures
1 Ø 15,82 (0.623) S - 68-75 Nm (50-55 ft. lbs) above 210 bar
Ø 17,42 (0.686) (3000 psi).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-121
PRV12-12 - Pressure reducing/relieving valve
Spool, pilot operated
114 L/min (30 USgpm) • 350 bar (5000 psi)
1 Operation Features
This valve is normally open and preventing any further Cartridge construction with
allowing inlet oil to pass to the pressure rise in the regulated hardened, ground and honed
regulated line until the outlet line. If any external force working parts giving smooth,
(regulated) pressure exceeds causes the regulated pressure stable operation over all
the setting of the pilot section. to rise more than 5-10% above pressure ranges.
When this setting is achieved the setting, the main spool
a pilot flow occurs, causing a moves back further, opening
3 2 pressure imbalance across the the regulated port to the tank
main spool, which then moves line, thus working as a relief
throttling the inlet flow valve.
1
Description Pressure drop curves
This is a pilot operated Cartridge only
screw in cartridge pressure
reducing / relieving valve. The
Flow - L/min (21,8 cSt oil @ 49ºC)
valve maintains a constant
outlet pressure in hydraulic 20 40 60 80 100
6000 415
sub-systems regardless of
fluctuations in the primary
5000 350
system. In addition to this it
will act as a relief valve if the
Pressure - bar
Pressure - psi
4000 280
pressure in the sub-system Relieving
rises higher than the setting of 3000 210
the valve directing excess fluid
to tank. Reducing
2000 140
1000 70
0 0
0 5 10 15 20 25 30
Flow - USgpm (105 SUS oil @ 120ºF)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-122 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PRV12-12 - Pressure reducing/relieving valve
Spool, pilot operated
114 L/min (30 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9
4 Adjustment E
S - Screw
7 Cracking pressure 8 Factory set reduced 9 Special features
C - Cap
range pressure
Note: Code based on pressure 00 - None
K - Knob Within ranges in 7 (Only required if valve has special
in psi. Blank - Normal factory setting features, omitted if ”00.”)
15 - 10-100 bar at approximate
5 Valve housing (150-1500 psi) mid-range. User requested
material 30 - 17- 210 bar settings in 3,45 bar (50 psi)
Omit for cartridge only (250-3000 psi) steps, Coded as in the
50 - 24-350 bar following examples:
S - Steel (350-5000 psi)
A - Aluminum 10 - 70 bar (1000 psi)
10.5 - 72,4 bar (1050 psi)
1.063"-12Thd.
3 67,3
(2.65) Warning
Aluminum housings can be used
2
for pressures up to 210 bar (3000
psi). Steel housings must be
1 used for operating pressures
above 210 bar (3000 psi).
Ø 22,17 (0.873)
Ø 23,75 (0.935)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-123
1PA100 - Pressure reducing valve
Spool, pilot operated
100 L/min (26 USgpm) • 10 bar (150 psi) to 350 bar (5000 psi)
1 Operation Features
This valve is normally open, When the regulated pressure Internal parts hardened, match
allowing oil from the inlet to pass reaches the valve setting, the ground and honed to give long,
through to the regulated port of pilot section opens causing trouble-free life. Pilot style
the cartridge. a pressure imbalance across design allows for high flows
the main spool which moves, and accurate performance.
throttling the inlet flow,
preventing any further pressure
rise in the regulated line.
3 2
4350 300
actuators such as brake
cylinders. 3625 250
2900 200
2175 150
1450 100
725 50
0 0
0 8 16 24 32 40
Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-124 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1PA100 - Pressure reducing valve
Spool, pilot operated
100 L/min (26 USgpm) • 10 bar (150 psi) to 350 bar (5000 psi)
1 2 3 4 5
E
5 Seals
50.8
17.0 A/F (2.00)
39.0
(1.54)
max 2 holes Ø10.3 (0.41) thro’ 25.4
28.6 A/F 49.3 (1.00)
8.0
(0.31) (1.94)
50.8 38.1
(2.00) (1.50)
Drain (3)
88.1 (3.49)
108.0 (4.25)
1-14 UNS 2A
71.0 Note: Tightening torque of ”F” Note: For applications above 210
(2.80) adjuster locknut - 20 to 25 Nm please consult our technical
department or use the steel
body option.
Inlet (2)
Reg (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-125
PRV2-16 - Pressure reducing/relieving valve
Spool, pilot operated
151 L/min (40 USgpm) • 350 bar (5000 psi)
1 Operation Features
This valve is normally open and preventing any further Cartridge construction with
allowing inlet oil to pass to the pressure rise in the regulated hardened, ground and honed
regulated line until the outlet line. If any external force working parts giving smooth,
(regulated) pressure exceeds causes the regulated pressure stable operation over all
the setting of the pilot section. to rise more than 5-10% above pressure ranges.
When this setting is achieved the setting, the main spool
a pilot flow occurs, causing a moves back further, opening
3 2 pressure imbalance across the the regulated port to the tank
main spool, which then moves line, thus working as a relief
throttling the inlet flow valve.
Port 1 to 3 Port 2 to 1
Flow - USgpm (105 SUS oil @ 120ºF)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-126 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
PRV2-16 - Pressure reducing/relieving valve
Spool, pilot operated
151 L/min (40 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6 7 8 9
6 Port size
1 Function
0 - Cartridge only
PRV2 - Pressure reducing/
Code Port size Housing number
relieving valve
Aluminum Aluminum Steel
light duty fatigue rated fatigue rated
2 Size 6B 3/4” BSPP 02–175465 – –
16 - 16 size 4G 1/2” BSPP – 876720 02–175131
6G 3/4” BSPP – 876722 02–175132
3 Seal material 10H SAE 10 – 876721 –
Blank - Buna-N 12H SAE 12 – 876723 –
V - Viton ®
10T SAE 10 – – 02–175129
12T SAE 12 566152 – 02–175130
4 Adjustment See section J for housing.
E
C - Cap
K - Knob 7 Cracking pressure 8 Factory set reduced 9 Special features
S - Screw range pressure
00 - None
Note: Code based on (Only required if valve has special
pressure in psi. Within ranges in 7
5 Valve housing material features, omitted if ”00.”)
30 - 34-210 bar Blank - Normal factory setting
S - Steel
(500-3000 psi) at approximate
A - Aluminum
60 - 70-415 bar mid-range. User requested
(1000-6000 psi) settings in 3,45 bar (50 psi)
steps, Coded as in the
following examples:
10 - 70 bar (1000 psi)
10.5 - 72,4 bar (1050 psi)
57,1 60,3 3
57,1 54.0
(2.37)
(2.25) (2.25) (2.13) 88.9
(3.50) 2
38.1 25.4
(1.50) 108.0 (1.00)
hex (4.25)
1
1.312”-12 Thd. 76.20 10.31
12.7
(4.25) (3.00) (0.41)
3 101.6
71,5 (4.00)
(2.81)
Warning
2 Aluminum housings can be used
for pressures up to 210 bar (3000
psi). Steel housings must be
1 used for operating pressures
Ø 26,95 (1.061) above 210 bar (3000 psi).
Ø 28,55 (1.124)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-127
1PA200 - Pressure reducing valve
Spool, pilot operated
200 L/min (52 USgpm) • 350 bar (5000 psi)
1 Operation Features
This valve is normally open, When the regulated pressure Internal parts hardened, match
allowing oil from the inlet to pass reaches the valve setting, the ground and honed to give long,
through to the regulated port of pilot section opens causing trouble-free life. Pilot style
the cartridge. a pressure imbalance across design allows for high flows
the main spool which moves, and accurate performance.
throttling the inlet flow,
preventing any further pressure
rise in the regulated line.
3 2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-128 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1PA200 - Pressure reducing valve
Spool, pilot operated
200 L/min (52 USgpm) • 350 bar (5000 psi)
1 2 3 4 5
5 Seals E
S - Nitrile (For use with most
Dimensions industrial hydraulic oils)
mm (inch)
SV - Viton ® (For high
temperature and most
special fluid applications)
Cartridge only Complete valve
Basic Code 3/4”, 1” Ports
1PA200 Basic Code
1PA250
Hex socket adjust
4.0 A/F 20.0
50.8 156.0 (6.14) max
(2.00) (0.79)
80.0 (3.15)
8.2
17.0 A/F (0.33)
32.2 25.4
(1.27) (1.00) 1
41.0 56.0
(1.61) 38.1 A/F (2.20)
max
2 3
76.2 20.0
(3.00) (0.79)
58.0
(2.28)
1-5/16-12 UNF-2A 2 holes
Ø8.5 (0.33) 115.0 (4.53)
thro’
Drain (3) Note: Tightening torque of ”F” Note: For applications above 210
80.0 adjuster locknut - 20 to 25 Nm please consult our technical depart-
(3.15) ment or use the steel body option.
Inlet (2)
Reg (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-129
1PDC5 - Pressure reducing valve
Direct acting 2 ported Pressure reducing valve with check
6L/min (1.5 USgpm) • 210bar (3000psi) Reg • 350bar (5000psi) Inlet
Operation Features
At low pressure the pilot It should be noted that if Hardened seat and ball
piston keeps the ball away the inlet pressure remains provide good sealing over the
from the seat allowing flow higher than the set pressure life of the valve. External parts
from port 1to 2. As the then leakage may take place surface hardened.
pressure in the line increases from port 1 to port 2. If the
the pilot piston is forced regulated line has no leakage
back against the spring until then the regulated pressure
the ball sits on the seat. The may rise in time to the inlet
inlet pressure can then rise pressure.
up to the maximum system
pressure. If the inlet pressure
Sectional view is removed then the ball will
remain on the seat limiting
the leakage to less than 1/3
cc/ min.
Performance data
E Ratings and specifications
Figures based on: Oil Temp=40 C Viscosity = 32 cSt (150 SUS)
Max setting 210 bar (3000psi)
Max inlet pressure 350 bar (5000 psi)
Rated Flow 6 lts/min (1.5 US gpm)
Cavity C-12-2
Standard housing material Aluminium up to 210 bar add suffix ”377”for steel option
Temperature range -40˚ to 120˚C (-40˚ to 248˚F)
Fluids All general purpose hydraulic fluids such as
MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Weight Cartridge only 0, 62Kg (1.36 lbs)
Seal kit 02-165889 Nitrile
02-165888 Viton®
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
E-130 Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com
1PDC5 - Pressure reducing valve
Direct acting 2 ported Pressure reducing valve with check
6L/min (1.5 USgpm) • 210bar (3000psi) Reg • 350bar (5000psi) Inlet
1 2 3 4 5
Warning
E
Dimensions Torque cartridge into housing Aluminum housings can be
mm (inch) A - 81-95Nm (60-70 ft lbs) used for pressures up to 210 bar
S - 102-115 Nm (75-85 ft lbs) (3000 psi). Steel housings must
be used for operating pressures
above 210 bar (3000 psi).
Cartridge only Installation drawing
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E—January 2018 www.eaton.com E-131
- Additional products, product lines, and services offered by Eaton -
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com F-3
Motion controls
Valve locator
Functional symbol
1 Model Cavity Flow rating Typical pressure Page
V1 V2
V1 V2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-4
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Motion controls
Valve locator
Functional symbol
1 Model Cavity Flow rating Typical pressure Page
2
C1 C2
V1 V2
4 2
C1 C2 Model Cavity
Motion control valve, with brake shuttle L/min (USgpm) bar (psi) Page
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Functional symbol
V1 T V2
Motion control valve & lock with brake shuttle L/min (USgpm) bar (psi)
F V1 B T V2
Bleed
Bleed Pilot
Drain
V V
V V1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-6
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
Motion controls
Valve locator
Functional symbol
Cyl GP Model Cavity Flow rating Typical pressure Page
CT1 CT2
V Gauge Pilot 2
V1 V
Drain
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-8
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
- Additional products, product lines, and services offered by Eaton -
Sa
ame day solutions with
ur Build Kit Program!
ou
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Figures based on: Oil Temp = 40° C Viscosity = 32 cSt (150 SUS)
Pilot (3)
F Rated flow 20 L/min (5 USgpm)
Max relief pressure 350 bar (5000 psi)
Valve (2)
Max load induced pressure 270 bar (4000 psi)
Cartridge material Working parts hardened and ground steel.
Cyl (1) External surfaces zinc plated.
Standard housing material Aluminum (up to 210 bar).
Description Add suffix “377” for steel option.
Overcenter valves give static Mounting position Unrestricted
and dynamic control of loads by
regulating the flow into and out Cavity number A22903 (See Section M)
of hydraulic actuators. When Torque cartridge into cavity 40 Nm (30 lbs ft)
installed close to or within an
actuator, the overcenter valve Weight 1CE20 0.16 kg (0.35 lbs)
1CE25 0.37 kg (0.82 lbs)
will stop runaway in the event 1CEE24 0.41 kg (0.89 lbs)
of hose burst and if open
center directional control valves Seal kit number SK1276 (Nitrile)
are used, will allow thermal SK1276V (Viton ®)
expansion relief of the hydraulic Recommended filtration level BS5540/4 Class 18/13 (25 micron nominal)
fluid.
Operating temperature -30°C to +90°C (-22° to +194°F)
The overcenter cartridge is
Leakage 0.3 milliliters/min nominal (5 dpm)
ideal for mounting directly into
a cavity machined in the body Nominal viscosity range 5 to 500 cSt
of the cylinder, motor or rotary
Viton is a registered trademark of E.I. DuPont.
actuator. The cartridge can also
be mounted directly to the ports Pressure drop
via a specifically machined Flow - L/min
body as part of a Hydraulic 0 10 20 30 40
Integrated Circuit or single unit, 750 50
or contained within one of our
standard line bodies. 600 40
Pressure - bar
Pressure - psi
F-10
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CE20 - Overcenter valve
Pilot assisted relief with check
20 L/min (5 USgpm) • 270 bar (4000 psi)
23.50 11.00
(0.93) (0.43)
CT1
54.00 42.00 3
49.60 (2.13) 63.50 (1.65) 2
(1.95) max (2.50)
22.0 A/F
25.00 1
(0.98) BATCH CODE 2 holes
Ø6.50
for fixed 32.00 (0.26) thro
‘N’ adjust (1.26)
Dual valve C1 C2
3/8" Ports
M18x1.5-6g Basic Code 1CEE24 (Internally Cross Piloted)
V1 V2
Valve (2)
23.50 23.50
(0.93) (0.93)
CT1 CT2
63.50 57.00 V1 V2
Cyl (1) (2.24)
(2.50)
Note: For applications above Note: Tightening torque
210 bar - please consult our of “F” adjuster locknut - C1 C2
technical department or use 20 to 25 Nm.
the steel body option. 15.90 28.00
(1.10) 2 holes Ø6.50
(0.63) 61.00 (2.40) (0.26) thro
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Pilot (3)
Performance data
Ratings and specifications
Figures based on: Oil Temp = 40° C Viscosity = 32 cSt (150 SUS)
F Valve (2)
Rated flow 30 L/min (8 USgpm)
Max relief pressure 350 bar (5000 psi)
Max load induced pressure 270 bar (4000 psi)
Cyl (1)
Cartridge material Working parts hardened and ground steel. External surfaces zinc plated.
Description Standard housing material Aluminum (up to 210 bar). Add suffix “377” for steel option.
Overcenter valves give static Mounting position Unrestricted
and dynamic control of loads by Cavity A6610 (See Section M)
regulating the flow into and out Torque cartridge into cavity 45 Nm (33 lbs ft)
of hydraulic actuators. When
installed close to or within an Weight 1CE30 0.15 kg (0.33 lbs)
1CE35 0.41 kg (0.90 lbs)
actuator, the overcenter valve 1CEE34 0.90 kg (1.98 lbs)
will stop runaway in the event
of hose burst and if open Seal kits SK395 (Nitrile)
SK395V (Viton ®)
center directional control valves
are used, will allow thermal Filtration Cleanliness code 18/13 (25 micron nominal)
expansion relief of the hydraulic Temperature range -30°C to +90°C (-22° to +194°F)
fluid. Internal leakage 0.3 milliliters/min nominal (5 dpm)
The overcenter cartridge is Nominal viscosity range 5 to 500 cSt
ideal for mounting directly
Viton is a registered trademark of E.I. DuPont.
into a cavity machined in the
body of the cylinder, motor or
rotary actuator. The cartridge Pressure drop
can also be mounted directly Flow - L/min Flow - L/min
to the ports via a specifically
machined body as part of a 0 10 20 30 40 50 0 10 20 30 40
Hydraulic Integrated Circuit 750 50 750 50
or single unit, or contained
600 40 600 40
Pressure - bar
Pressure - bar
line bodies.
450 30 450 30
Single overcenter valves are Free flow
normally used when the load
Free flow
300 20 300 20
is unidirectional, for example
an aerial platform or crane
and dual overcenter valves 150 10 150 10
are used for controlling loads Pilot Pilot
0 open 0 0 open 0
in both directional for motor
applications or for cylinders 0 2.5 5 7.5 10 12.5 0 2.5 5 7.5 10
going over center. Flow - US gpm Flow - US gpm
2:5:1 and 5:1 version 10:1 version
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-12
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CE30 - Overcenter valve
Pilot assisted relief with check
30L/min (8 USgpm) • 270 bar (4000 psi)
1CE35 - Cartridge in body Aluminum single Steel single Aluminum dual Steel dual
17.0 A/F
9.0 11.5
(0.35) (0.45)
3
88.0 107.0
26.5 (3.46) (4.21)
(1.04) 2
for max
42.0 fixed
60.0 (1.65)
(2.36) ‘N’ adjust
47.0 28.0 1
(1.85) (1.10) 16.0 9.0
max max (0.63) (0.35)
for 25.4 A/F 31.8 32.0
(1.26)
fixed (1.25)
63.5
‘N’ (2.50)
adjust
Double valve with housing C1 C2
9.8
16.0 (0.39)
0.63) 86.36 (3.40)
101.6 (4.0)
31.8
Cyl (1) (1.25) 2 holes Ø9.0 (0.35) thro’
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-14
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CEH30 - High pressure overcenter valve
Pilot assisted relief with check
30L/min (8 USgpm) • 350 bar (5000 psi)
2 Adjustment
F - Screw adjustment 4 Pressure range 5 Seal material
Note: Code based on pressure in bar. S - Buna-N
43 - (3:1 and 5:1): 250-430 bar. SV - Viton
Std setting 350 bar.
Std setting made at
1 L/min 6 Pilot ratio
Note: Contact CSR for special pressure setting. 2 - 3:1
5 - 5:1
F
Dimensions Note: Tightening torque Single valve with housing
of “F” adjuster locknut - Basic Code
mm (inch) 20 to 25 Nm 1CEH35
VALVE (2)
Cartridge only
Basic Code
2 holes Ø9.0 (0.35) thro'
1CEH30
CYL (1)
9.0 11.5
[0.35] [0.45]
123.5
[4.86]
3 max
26.5
HEX SOCKET ADJUST [1.04] 2
42.0
4.0 A/F 60.0 [1.65]
[2.36] 1
17.0 A/F HEX
16.0
[0.63] 9.0
31.8 [0.35]
[1.25] 32.0
[1.26]
63.5 [2.50]
C1 C2
63.8
[2.51] Double valve with housing
max Basic Code
1CEE34
25.4 A/F HEX
V1 V2
70.0 (2.75)
31.7
M20X1.5-6g (1.25)
PILOT (3)
42.5
[1.67]
VALVE (2) 127.0
[5.00]
max
26.5 V1 V2
[1.04]
54.5
63.5 [2.15]
C1 C2
CYL (1) [2.50]
Ø 15.94
16.0 9.0
[0.63] 31.8 [0.63] [0.35]
[1.25] 9.8 82.0 [3.23] 2 holes Ø9.0
Ø 17.40 [0.39]
101.6 [4.00] (0.35) thro'
[0.68]
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Figures based on: Oil Temp = 40° C Viscosity = 32 cSt (150 SUS)
Rated flow 30 L/min (8 USgpm)
Max relief pressure 350 bar (5000 psi)
F Max load induced pressure 270 bar (4000 psi)
Cartridge material Working parts hardened and ground steel. External surfaces zinc plated.
Standard housing material Aluminum (up to 210 bar). Add suffix “377” for steel option.
Mounting position Unrestricted
Cavity A6610 (See Section M)
Pilot (3) Torque cartridge into cavity 45 Nm (33 lbs ft)
Weight 1CER30 0.15 kg (0.33 lbs)
1CER35 0.41 kg (0.90 lbs)
Valve (2) 1CEER34 0.90 kg (1.98 lbs)
Seal kits SK395 (Nitrile)
SK395V (Viton ®)
Filtration Cleanliness code 18/13 (25 micron nominal)
Cyl (1) Temperature range -30°C to +90°C (-22° to +194°F)
Internal leakage 0.3 milliliters/min nominal (5 dpm)
Nominal viscosity range 5 to 500 cSt
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-16
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CER30 - Overcenter valve
Part balanced, pilot assisted relief with check
30 L/min (8 USgpm) • 270 bar (4000 psi)
1 2 3 4 5 6
42.5 31.7
(1.67) (1.25)
Valve (2)
26.5
(1.04)
111.0
V1 V2 (4.37)
63.5 57.0 max
(2.50) (2.24)
Cyl (1)
C1 C2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Performance data
Ratings and specifications
Figures based on: Oil Temp = 40° C Viscosity = 32 cSt (150 SUS)
Rated flow 30 L/min (8 USgpm)
Max relief pressure 430 bar (6240 psi)
F Max load induced pressure 350 bar (5000 psi)
Cartridge material Working parts hardened and ground steel. External surfaces zinc plated.
Standard housing material Steel. Add suffix “377”.
Mounting position Unrestricted
Cavity A6610 (See Section M)
Torque cartridge into cavity 68-75 Nm (50-56 lbs ft)
Weight 1CERH30 0.2 kg (0.55 lbs)
1CERH35 0.51 kg (1.12 lbs)
1CEERH34 1.0 kg (2.2 lbs)
Seal kits 9900925-000 (Nitrile)
PILOT (3) 9900926-000 (Viton®)
Filtration Cleanliness code 18/13 (25 micron nominal)
VALVE (2)
Temperature range -30°C to +90°C (-22° to +194°F)
CYL (1) Internal leakage 5 dpm @ 85% of Cracking
Nominal viscosity range 5 to 500 cSt
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-18
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CERH30 - High pressure overcenter valve
Pilot assisted relief with check
30L/min (8 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
42.5
[1.67]
VALVE (2)
127.0
[5.0]
26.5 max
CYL (1) V1 V2
Ø 15.94 [1.04]
[0.63] 54.5
63.5 [2.15]
Ø 17.40
[0.68] [2.50] C1 C2
16.0 9.0
31.8 [0.63] [0.35]
82.0
86.36
[1.25] 9.8 [3.23]
(3.40)
[0.39] 2 holes Ø9.0
101.6 (0.35) thro'
[4.0]
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Figures based on: Oil Tem = 40˚C Viscosity = 32 cSt (150 SUS)
Rated flow 30 L/min (8 USgpm)
F-20
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CEB30 - Overcenter valve
Fully balanced, pilot assisted, relief with check
30 L/min (8 USgpm) • 270 bar (4000 psi)
63.5 (2.50)
M20 x 1.5-6g
Dual valve C1 C2
Valve (2)
26.5
(1.04)
111.0
V1 V2 (4.37)
max
63.5 57.0
Cyl 1) (2.50) (2.24)
C1 C2
Note: For applications above Note: Tightening torque
210 bar - please consult our of “F” adjuster locknut - 9.8
16.0 (0.39)
technical department or use 20 to 25 Nm (0.63) 86.36 (3.40)
82.0 (3.23)
the steel body option 31.8 101.6 (4.00)
(1.25) 2 holes Ø9.0 (0.35) thro’
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Performance data
Ratings and specifications
F-22
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CEBD30 - Overcenter valve
Fully balanced, pilot assisted, relief
30 L/min (8 USgpm) • 270 bar (4000 psi)
1 2 3 4 5
Dimensions
mm (inch)
5.00 A/F Hex
Cartridge only
Basic Code F
1CEBD30
15.00
17.00 A/F Hex (0.59)
42.5
(1.67)
25.40 A/F Hex
47.0
(1.85)
max
Vent
Pilot (3)
42.5
(1.67)
Valve (2)
Cyl (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1
Operation Features
The check section allows free pressure loss and therefore Cartridge is economical
flow and then locks the load instability. The total pressure and fits simple cavity.
against movement. The pilot setting will normally be set Allows quick, easy field
assisted relief valve section at 1.3 times the load induced service - reduces down time.
will give controlled movement pressure. The counterbalance Interchangeable with pilot
when pilot pressure is applied, pressure reduces as the pilot check valve of a similar size.
3 maintaining a counterbalance pressure increases.
pressure to prevent initial Pilot ratio
Primary 4.3:1
2 Secondary 0.4:1
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-24
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CEL30 - Overcenter valve
Counterbalance pilot assisted relief with check
30 L/min (8 USgpm) • 380 bar (5510 psi)
1 2 3 4 5 6 7
Dual valve
3/8". 1/2" Ports
Pilot (3) Basic Code 1CEEL34 V1 V2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1 Operation Features
The check section allows the valve is controlled by the rate The cartridge fits a simple
free flow into the actuator of the spring, the seat angle and cavity allowing quick, easy
3 then holds and locks the load the pilot pressure applied. field service reducing down
against movement. By the Due to the balanced poppet time. Hardened poppet and
application of pilot pressure design load induced pressure seat provide for long leak free
4 2 to the pilot port the poppet will not open the valve and once performance.
moves back against the main open valve port pressure will
spring opening the cylinder not increase the pilot pressure
port to the valve port. The required to keep the valve open
Sectional view metering characteristic of
Performance data
Figures based on: Oil Temp = 40˚C Viscosity = 32 cSt (150 SUS)
Rated flow 30 L/min (8 USgpm)
Vent (4) Max working pressure 350 bar (5000 psi)
Cartridge material Working parts hardened and ground steel.
External surfaces zinc plated.
F Pilot (3) Mounting position Unrestricted
Cavity AXP20530 (See Section M)
Torque cartridge into cavity 45 Nm (33 lbs ft)
Valve (2) Weight 0.15 kg (0.33 lbs)
Seal kit SK1159 (Nitrile)
SK1159V (Viton®)
SK1159P (Polyurethane/Nitrile)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-26
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CPBD30 - Overcenter valve
Zero differential with check
30 L/min (8 USgpm) • 350 bar (5000 psi)
1 2 3 4
Dimensions
mm (inch)
Cartridge only
Basic Code 1CPBD30
51.00
25.40 A/F hex 46.70 (2.00)
15.00 (1.84) max
(0.59)
4 (Drain)
1 (Cyl)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
2 Adjustment means
6 Pilot ratio
F - Screw Adjustment
(omit for 1CEL30 based options)
N - Fixed - State pressure
setting required 2 - 2.5:1 4 - 4:1
5 - 5:1 10 - 10:1
For fixed versions add setting
F in 10 bar increments to end
(See cartridge details)
of part number. Subject to a
±10% tolerance.
3 Port sizes
Code Port size Housing number
Aluminium Steel
Through Ported
3W 3/8" BSP - Body ONLY B13542 B13543
Banjo Mounted
3W 3/8" BSP - Sub Assembly AXP13617-3W-S
Gasket Mounted
3W 3/8" BSP - Sub Assembly BXP13621-3W-S
Dual Overcenter (Internally Cross Piloted)
3W 3/8" BSP - Sub Assembly BXP24147-3W-S BXP24147-3W-S-377
6T 3/4" SAE - Sub Assembly BXP24147-6T-S
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-28
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CE Series - Overcenter valve
Alternative body arrangements for 30 L/min valves
Dimensions
mm (inch)
V2 C2
16.0
(0.63) 31.5
(1.24)
64.0 16.0
26.0 (1.02)
70.0 59.0 (2.32) F
(2.52) (0.63) max 63.5 (2.50)
(2.76)
1CEG35/1CEBG35/1CERG35/1CELG35 1CEE35/1CEEB35/1CEER35/1CEEL35
(Internally Cross-Piloted)
186.8
11.5 (7.35)
(0.45) 50.8 (2.00) 63.5 (2.50) max
26.0
(1.02) 26.3 8.0
(1.04) (0.32)
123.5
C2
(4.86) C2 V1
3
1 76.2 56.0 72.0
2
(3.00) (2.20) (2.83)
C1 V2
45.7
(1.80) C1
16.0 16.0
(0.63) (0.63)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1 Operation Features
The check section allows pressure required to open the Cartridge is economical and
free flow into the actuator valve and allow movement fits simple cavity. Allows quick,
then holds and locks the load depends on the pilot ratio of the easy field service - reduces
3 against movement. The pilot valve. For optimization of load down time. Interchangeable
assisted relief valve section control and energy usage, a with pilot check valve of a
will give controlled movement choice of pilot ratios is available. similar size.
when pilot pressure is applied. The pressure required to open
2 The relief section is normally the valve and start actuator Pilot ratio
set to open at a pressure at movement can be calculated as 4:1 Best suited for applications
Sectional view least 1.3 times the maximum follows: where load varies and
load induced pressure but the
machine structure can induce
Pilot Pressure =
instability.
(Relief Setting) - (Load Pressure)
8:1 Best suited for applications
Pilot Ratio where the load remains
relatively constant.
Performance data
Ratings and specifications
Figures based on: Oil Temp = 40˚C Viscosity = 32 cSt (150 SUS)
Rated flow 90 L/min (23 USgpm)
Pilot (3) Max relief setting 350 bar (5000 psi).
F Max load Induced pressure 270 bar (4000 psi).
Valve (2) Cartridge material Working parts hardened and ground steel.
External surfaces zinc plated.
Standard housing materials Aluminum (up to 210 bar).
Cyl (1)
Add suffix “377” for steel option.
Mounting position Unrestricted
Description
Cavity number A12336 (See Section M)
Overcenter valves give
static and dynamic control Torque cartridge into cavity 60 Nm (44 lbs ft)
of loads by regulating the Weight 1CE90 0.29 kg (0.63 lbs)
flow into and out of hydraulic 1CE95 1.35 kg (2.97 lbs)
actuators. When installed 1CEE95 2.10 kg (4.62 lbs)
close to or within an actuator, Seal kit number SK633 (Nitrile)
the overcenter valve will SK633V (Viton®)
stop runaway in the event
Recommended filtration level BS5540/4 Class 18/13 (25 micron nominal)
of hose burst and if open
center directional control Operating temperature -30° to +90°C (-22° to +194°F)
valves are used, will allow
Leakage 0.3 milliliters/min nominal (5 dpm)
thermal expansion relief of the
hydraulic fluid. Nominal viscosity range 5 to 500 cSt
The overcenter cartridge is Viton is a registered trademark of E.I. DuPont.
ideal for mounting directly into
a cavity machined in the body Pressure drop
of the cylinder, motor or rotary
actuator. The cartridge can also Flow - L/min Flow - L/min
be mounted directly to the ports 0 25 50 75 100 0 25 50 75 100
via a specifically machined 240 16 600 42
body as part of a Hydraulic 210 14 500 35
Integrated Circuit or single unit,
Pressure - bar
Pressure - psi
180
Pressure - bar
12
Pressure - psi
F-30
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CE90 - Overcenter valve
Pilot assisted relief with check
90 L/min (23 USgpm) • 270 bar (4000 psi)
2 Adjustment means 8T 1/2" SAE Valve & Cyl Port 1/4” SAE Pilot Port B10806 B10922 C10807 C11561
F - Screw Adjustment
N - Fixed - State pressure 4 Pressure range 5 Seals 6 Pilot Ratio
setting required. @ 4.8 I/min S - Nitrile (For use with most 4 - 4:1
For fixed versions add setting Note: Code based on pressure industrial hydraulic oils) 8 - 8:1
in 10 bar increments to end in bar.
SV - Viton (For high Other ratios available upon
of part number. Subject to a 20 - 70-225 bar. temperature and most
±10% tolerance. request
Std setting 100 bar special fluid applications)
35 - 200-350 bar.
Std setting 210 bar
Std setting made at 4.8 L/min F
Dimensions Single valve
mm (inch) 1/2" Ports 38.1
Hex socket adjust Basic Code (1.50)
Cartridge only 5.0 A/F
1CE95
Basic Code
1CE90 17.0 A/F
18.0
(0.71) 132.0
3 (5.2)
36.0 max
62.0 2
(1.42) 58.0
(2.44) 70.0
max 32.0 A/F (2.76) (2.28)
10.0
19.0 (0.39)
(0.75) 56.0 (2.20) 2 holes
38.1 76.2 (3.0) Ø11.0 (0.43)
(1.50) thro’
M27 x 1.5-6g C1 C2
Dual valve
1/2" Ports
Basic Code 1CEE95 86.5 (3.41)
Pilot (3) Internally Cross Piloted 40.5
54.0 (1.59)
V1 V2
(2.13)
Valve (2)
139.0
(5.47)
36.0 V1 V2 max
58.0
76.2 (1.42) (2.28)
(3.0)
Cyl (1) C1 C2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Performance data
Ratings and specifications
Figures based on: Oil Temp = 40°C Viscosity = 32 cSt (150 SUS)
Rated flow 90 L/min (23 USgpm)
Max relief setting 430 bar (6240 psi).
F PILOT (3) Max load Induced pressure 350 bar (5000 psi).
Cartridge material Working parts hardened and ground steel.
VALVE (2) External surfaces zinc plated.
Standard housing materials Steel. Add suffix “377” for steel option.
Mounting position Unrestricted
CYL (1)
Cavity number A12336 (See Section M)
Description
Torque cartridge into cavity 100-110 Nm (73-81 lbs ft)
Overcenter valves give
static and dynamic control Weight 1CEH90 0.6 kg (1.32 lbs)
of loads by regulating the 1CEH95 1.66 kg (3.66 lbs)
flow into and out of hydraulic 1CEEH95 2.72 kg (6.00 lbs)
actuators. When installed Seal kit number 9900927-000 (Nitrile)
close to or within an actuator, 9900928-000 (Viton®)
the overcente valve will Recommended filtration level BS5540/4 Class 18/13 (25 micron nominal)
stop runaway in the event
of hose burst and if open Operating temperature -30° to +90°C (-22° to +194°F)
center directional control Leakage 5 dpm @ 85% of Cracking
valves are used, will allow
thermal expansion relief of the Nominal viscosity range 5 to 500 cSt
hydraulic fluid. Viton is a registered trademark of E.I. DuPont.
The overcenter cartridge is
ideal for mounting directly
into a cavity machined in the Pressure drop
body of the cylinder, motor or
Flow - US GPM
rotary actuator. The cartridge
can also be mounted directly 0 6.5 13 19.4 26
18 260
to the ports via a specifically
machined body as part of a
Hydraulic Integrated Circuit or 13.5 195
Pressure - bar
Pressure - psi
F-32
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CEH90 - High pressure overcenter valve
Pilot assisted relief with check
90 L/min (23 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
18.0
36.0 3 [0.71]
[1.42]
58.0 2
70.0 [2.28]
32.0 A/F HEX [2.76]
1
96.1
[3.78] 19.0
10.0 56.0
[0.39] [2.20] 2 holes Ø11.0
[0.75]
38.1 76.2 (0.43) thro'
[1.50] [3.00]
C1 C2
Dual valve
M27X1.5-6g 1/2" Ports1CEEH95
86.5
Basic Code 1CEEH95 [3.41] V1 V2
40.5
Internally Cross Piloted [1.59]
PILOT (3)
53.7
[2.12] VALVE (2) 171.9
[6.77]
max
36.0
[1.42] V1 V2
58.2
CYL (1) Ø 22.94 76.2 [2.28]
[3.00] C1 C2
[0.90]
Ø 24.44
[0.96] 10.0 107.0
19.1
[0.75] [0.39] [4.21]
38.1
[1.50] 127.0
[5.0]
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1 Operation Features
The check section allows depends on the pilot ratio of Cartridge is economical
free flow into the actuator the valve. For optimization and fits simple cavity.
then holds and locks the load of load control and energy Allows quick, easy field
against movement. The pilot usage, a choice of pilot ratios service - reduces down time.
3
assisted relief valve section is available. Interchangeable with pilot
will give controlled movement check valve of a similar size.
The pressure required to open
when pilot pressure is applied. the valve and start actuator
2 The relief section is normally movement can be calculated Pilot ratio
set to open at a pressure at as follows:
least 1.3 times the maximum 4:1 Best suited for applications
load induced pressure but the where load varies and
Pilot Pressure =
Sectional view pressure required to open the machine structure can induce
(Relief Setting) - (Load Pressure) instability.
valve and allow movement
Pilot Ratio
Other ratios available upon
request.
Performance data
Ratings and specifications
Figures based on: Oil Temp = 40˚C Viscosity = 32 cSt (150 SUS)
Rated flow 90 L/min (23 USgpm)
Max relief pressure 350 bar (5000 psi)
F Max load induced pressure 270 bar (4000 psi)
Pilot (3) Cartridge material Working parts hardened and ground steel.
External surfaces zinc plated.
Standard housing materials Aluminum up to 210 bar.
Add suffix “377” for steel option.
Valve (2) Cavity A12336 (see Section M)
Mounting position Unrestricted
Torque cartridge into cavity 60 Nm (44 lbs ft)
Weight 1CER90 29 kg (.63 lbs)
Cyl (1) 1CER95 1.35 kg (2.97 lbs)
1CEER95 2.10 kg (4.62 lbs)
Seal kit SK633 (Nitrile)
SK633V (Viton®)
Filtration BS5540/4 Class 18/13 (25 micron nominal)
Temperature range -30° to +90°C (-22° to +194°F)
Internal leakage 0.3 ml/min (5 dpm)
Description Nominal viscosity range 5 to 500 cSt
The 1CER series overcenter Viton is a registered trademark of E.I. DuPont.
valve performs all duties of
a regular overcenter but is Pressure drop
able to relieve and stay open
irrespective of downstream Flow - L/min
pressure. This enables 0 25 50 75 100
the valve to operate when 240 16
used with a closed center
210 14
directional valve which has
Pressure - bar
Pressure - psi
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-34
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CER90 - Overcenter valve
Part balanced, pilot assisted relief with check
90 L/min (23 USgpm) • 270 bar (4000 psi)
1 2 3 4 5 6
Valve (2)
139.0
(5.47)
36.0 V1 V2 max
58.0
76.2 (1.42) (2.28)
Cyl (1) (3.0)
C1 C2
Note: For applications above Note: Tightening torque
210 bar - please consult our of “F” adjuster locknut - 10.0
19.0 (0.39) 107.0 (4.21)
technical department or use 20 to 25 Nm. (0.75)
the steel body option. 127.0 (5.0)
38.1
(1.50) 2 holes Ø11.0 (0.43) thro’
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Figures based on: Oil Temp = 40°C Viscosity = 32 cSt (150 SUS)
Rated flow 90 L/min (23 USgpm)
Max relief pressure 430 bar (6240 psi)
F Max load induced pressure 350 bar (5000 psi)
Cartridge material Working parts hardened and ground steel.
External surfaces zinc plated.
Standard housing materials Steel. Add suffix “377”.
Cavity A12336 (see Section M)
Mounting position Unrestricted
Torque cartridge into cavity 100-110 Nm (73-81lbs ft)
Weight 1CERH90 0.6 kg (1.32 lbs)
PILOT (3) 1CERH95 1.66 kg (3.66 lbs)
1CEERH95 2.72 kg (6.00 lbs)
Seal kit 9900927-000 (Nitrile)
VALVE (2) 9900928-000 (Viton®)
Filtration BS5540/4 Class 18/13 (25 micron nominal)
Temperature range -30° to +90°C (-22° to +194°F)
CYL (1) Internal leakage 5 dpm @ 85% of Cracking
Nominal viscosity range 5 to 500 cSt
Description
Viton is a registered trademark of E.I. DuPont.
The 1CERH series overcenter
valve performs all duties of Pressure drop
a regular overcenter but is Flow - US GPM
able to relieve and stay open 0 6.5 13 19.5 26
irrespective of downstream 18 260
pressure. This enables
the valve to operate when
used with a closed center 13.5 195
directional valve which has
Pressure - bar
Pressure - psi
0 0
0 25 50 75 100
Flow - L/min
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-36
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CERH90 - High pressure overcenter valve
Part balanced, pilot assisted relief with check
90 L/min (23 USgpm) • 350 bar (5000 psi)
1 2 3 4 5 6
18.0
36.0 3 [0.71]
[1.42]
58.0 2
96.1 70.0 [2.28]
32.0 A/F HEX
[3.78] [2.76]
1
PILOT (3)
53.7
[2.12]
171.9
VALVE (2)
[6.77]
max
36.0
[1.42] 58.0 V1 V2
C1 C2 [2.28]
CYL (1) 76.2
Ø 22.94 [3.00] C1 C2
[0.90]
Ø 24.45
[0.96]
19.1 10.0 107.0
V1 V2
[0.75] 38.1 [0.39] [4.21]
[1.50] 127.0
[5.00] 2 holes Ø11.0
(0.43) thro'
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1 Operation Features
The check section allows depends on the pilot ratio of Cartridge is economical
free flow into the actuator the valve. For optimization and fits simple cavity.
then holds and locks the load of load control and energy Allows quick, easy field
against movement. The pilot usage, a choice of pilot ratios service - reduces down time.
3
assisted relief valve section is available. Interchangeable with pilot
will give controlled movement The pressure required to open check valve of a similar size.
when pilot pressure is applied. the valve and start actuator
The relief section is normally movement can be calculated Pilot ratio
2
set to open at a pressure at as follows: 4:1 Best suited for applications
least 1.3 times the maximum
where load varies and
load induced pressure but the Pilot Pressure =
machine structure can induce
pressure required to open the
(Relief Setting) - (Load Pressure) instability.
valve and allow movement
Pilot Ratio Other ratios available upon
Sectional view request.
Performance data
Pressure - bar
protection. 180 12
Free flow
Single overcenter valves 150 10
control unidirectional loads 120 8
such as in aerial platforms, 90 6
cranes or winches and dual
overcenters are suited to 60 4
bi-directional motion such as 30 2
wheel motor applications or
0 Piloted open 0
cylinders going over center.
0 6.5 13 19.5 26
Flow - US gpm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-38
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CEB90 - Overcenter valve
Fully balanced, pilot assisted relief with check
90 L/min (23 USgpm) • 270 bar (4000 psi)
1 2 3 4 5 6
Dual valve
M27 x 1.5-6g 1/2" Ports
Basic Code 1CEEB95
Internally Cross Piloted 86.5 (3.41) V1 V2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1
Operation Features
The check section allows valve and allow movement Cartridge is economical and
free flow into the actuator depends on the pilot ratio of fits simple cavity. Allows
3
then holds and locks the load the valve. For optimization quick, easy field service -
against movement. The pilot of load control and energy reduces down time.
assisted relief valve section usage, a choice of pilot ratios
2
will give controlled movement is available. Pilot ratio
when pilot pressure is applied. The pressure required to open
Sectional view 4:1 Best suited for applications
The relief section is normally the valve and start actuator where load varies and
set to open at a pressure at movement can be calculated machine structure can induce
least 1.3 times the maximum as follows: instability.
load induced pressure but the
pressure required to open the Pilot Pressure = Other ratios available upon
request.
(Relief Setting) - (Load Pressure)
Pilot Ratio
Performance data
Pressure - bar
or proportional systems.
The drain line allows the 180 12
Free flow
valve to be used in corrosive 150 10
atmospheres preventing 120 8
the ingress of atmospheric
contaminant. 90 6
Single overcenter valves are 60 4
normally used when the load 30 2
is unidirectional, for example 0 Piloted open 0
an aerial platform or crane
0 6.5 13 19.5 26
and dual overcenter valves
are used for controlling loads Flow - US gpm
in both directional for motor
applications or for cylinders
going over center.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-40
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CEBD90 - Overcenter valve
Fully balanced, pilot assisted relief with check
90 L/min (23 USgpm) • 270 bar (4000 psi)
Cartridge only
Basic Code
1CEBD90 F
Hex socket adjust
5.0 A/F
Vent
M27 x 1.5-6g
Pilot (3)
54.0
(2.13)
Valve (2)
Cyl (1)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1
Operation pressure loss and therefore Features
The check section allows free instability. The total pressure Cartridge is economical
flow and then locks the load setting will normally be set and fits simple cavity.
against movement. The pilot at 1.3 times the load induced Allows quick, easy field
assisted relief valve section pressure. The counterbalance service - reduces down time.
will give controlled movement pressure reduces as the pilot Interchangeable with pilot
when pilot pressure is applied, pressure increases. check valve of a similar size.
maintaining a counterbalance
3 pressure to prevent initial
Pilot ratio
Primary 5.6:1
Secondary 0.7:1
2
Performance data
Figures based on: Oil Temp = 40˚C Viscosity = 32 cSt (150 SUS)
Rated flow 90 L/min (23 USgpm)
Maximum setting 1SEL30
Max load induced pressure 280 bar (4000 psi)
Cartridge material Working parts hardened and ground steel.
External surfaces zinc plated.
F Standard housing material Aluminum (up to 210 bar).
Add suffix “377” for steel option.
Mounting position Unrestricted
Cavity number A12336 (See Section M)
Pilot (3) Torque cartridge into cavity 60 Nm (44 ft. lbs.)
Weight 1CEL90 0.29 kg (0.63 lbs.)
1CEL95 1.35 kg (2.97 lbs.)
1CEEL95 2.10 kg (4.62 lbs.)
Valve (2)
Seal kit number SK633 (Nitrile)
SK633V (Viton ®)
Recommended filtration level BS5540/4 Class 18/13 (25 micron nominal)
Operating temperature -30° C to +90° C (-22° to +194°F)
Cyl (1)
Internal leakage 0.3 milliliters/min nominal (5 dpm)
Nominal viscosity range 5 to 500 cSt
Viton is a registered trademark of E.I. DuPont.
Description
The 1CEL overcenter valve Pressure drop
performs all duties of a regular Flow - L/min
overcenter but maintains 0 20 40 60 80 100
a counterbalance pressure Note: This valve has been
240 16
to provide dampening of designed to eliminate
210 14 instability from flexible boom
cylinders when there is a
applications or where the load
Pressure - bar
180 12
Pressure - psi
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-42
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CEL90 - Overcenter valve
Counterbalance, pilot assisted relief with check
90 L/min (23 USgpm) • 280 bar (4000 psi)
1 2 3 4 5 6 7
For fixed versions add setting 20 - 170-350 Standard 220 SV - Viton (for high
in 10 bar increments to end (160/60) temperature and most 7 Counterbalance
of part number. Subject to a 30 - 210-380 Standard 280 special fluid applications) setting bar
±10% tolerance. (220/60). (10 bar increments)
Standard setting made at 20 to 170 bar (300 tp
4.8 L/min 250 psi)
Dimensions F
mm (inch)
38.1
Cartridge only Hex socket adjust Single valve (1.50)
Basic Code 5.0 A/F
1/2" Ports
1CEL90 Basic Code
17.0 A/F 1CEL95
18.0
(0.71) 132.0
3 (5.2)
36.0 max
2
62.0 (1.42) 58.0
70.0
(2.44) (2.76) (2.28)
max 32.0 A/F
1
10.0
19.0 (0.39)
(0.75) 56.0 (2.20) 2 holes
38.1 76.2 (3.0) Ø11.0 (0.43)
(1.50) thro’
Dual valve
M27 x 1.5-6g
1/2" Ports
Basic Code 1CEEL95 86.5 (3.41)
Internally Cross Piloted) 40.5
(1.59)
Pilot (3)
54.0
(2.13)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Performance data
Figures based on: Oil Temp = 40˚C Viscosity = 32 cSt (150 SUS)
Rated flow 90 L/min (23 USgpm)
Maximum working pressure 350 bar (5000 psi)
Vent (4) Cartridge material Working parts hardened and ground steel.
External surfaces zinc plated.
Mounting position Unrestricted
F
Cavity number A12196 (See Section M)
Pilot (3)
Torque cartridge into cavity 60 Nm (44 ft. lbs.)
Valve (2) Weight 0.29 kg (0.63 lbs.)
Seal kit number SK634 (Nitrile)
SK634V (Viton ®)
Recommended filtration level BS5540/4 Class 18/13 (25 micron nominal)
Temperature -30° C to +90° C (-22° to +194°F)
Cyl (1)
Internal leakage 0.3 milliliters/min nominal (5 dpm)
Nominal viscosity range 5 to 500 cSt
Viton is a registered trademark of E.I. DuPont.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
F-44
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) &7-4$.$&—January 2018 www.eaton.com
1CPBD90 - Overcenter valve
Zero differential with check
90 L/min (23 USgpm) • 350 bar (5000 psi)
1 2 3 4
Dimensions
mm (inch)
Cartridge only
Basic Code
1CPBD90
F
Hex socket adjust
5.0 A/F
Vent (4)
M27 x 1.5-6g
Pilot (3)
54.0
(2.13)
Valve (2)
Cyl (1)
Note: Tightening torque of “F”
adjuster locknut - 20 to 25 Nm
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1 Operation Features
By the application of pilot Due to the balanced poppet The cartridge fits a simple
pressure to the pilot port the design load induced pressure cavity allowing quick, easy
poppet moves back against will not open the valve and field service reducing down
3 the main spring opening. The once open valve port pressure time. Hardened poppet and
metering characteristic of the will not increase the pilot seat provide for long leak free
valve is controlled by the rate pressure required to keep the performance.
of the spring, the seat angle valve open.
4 2 and the pilot pressure applied.
Sectional view
Performance data
Figures based o