Professional Documents
Culture Documents
7628R064G Wireless Router Specification
7628R064G Wireless Router Specification
7628R064G Wireless Router Specification
Software function
3G/4G Display 3G/4G connection status, SIM card status, network selection status
WAN Display the connection status, protocol and connection duration of the WAN port
System Wireless Display wireless 2.4G enable/disable status, wireless SSID, number of wireless connected devices
status 2.4G
DHCP Server Display the On/Off status of DHCP server, start IP address, end IP address
4G On/off button
WAN Mode PPPOE:Username, password, access to concentrator, service name, MAC clone, MTU settings
Static (fixed IP): IP address, subnet mask, default gateway, preferred DNS, alternative DNS, MAC
Basic Relay
settings Wireless 2.4G enable/disable button, wireless SSID settings, wireless encryption
Number of connections
LAN/WAN LAN and WAN ports can be switched to each other and the LAN port can be bridged
Local Area Set the internal and external IP (e.g. the wan port is connected to a higher level
Network route in order to avoid IP conflicts you can set a different segment from the higher
VLAN Can be divided into multiple VLANs and supports direct communication between
computers
QOS Set the upstream and downstream bandwidth of the current network speed, to be
combined with the total bandwidth rate for the end device
Advanced DDNS This setting allows you to manage remote access by registering an account with the
settings default ddns service provider and binding a dynamic ip to the domain name
Static routing
Port Internal port forwarding external port configuration items
Forwarding
DMZ Specify the settings for devices with intranet ip to be open to the external network
detection
Host Name Add the host name and MAC address of the terminal device
MAC address Setting up a black and white list of terminal MACs to access the network
filtering
Security IP address Set up a black and white list of terminal IP addresses to access the network
filtering
Domain Set up a black and white list of visited domains
Filtering
WPS Set the WPS on and off button
MAC address Customizable schedule to automatically turn WIFI on or off at certain times
filtering
IP address Set the port for remote management to be remotely accessible via a known WAN
filtering port IP and port, (note that the WAN port IP must be a public IP)
System Domain Select the time zone of your region and synchronise the internet time
Filtering
WPS Select the firmware file to be upgraded for system upgrade
MAC address Backup the current configuration of the system and restore the saved configuration
Manage Change the login password for the web administration interface
passwords
Language Set the language of the system, English or Chinese
Watchcat WatchCat allows the setting of periodic reboots and/or when the network
factory
PING Network conductivity testing
Diagnostic TRACEROUTE Send packets to the destination host via TRACEROUTE to check if each device on this path is on or off
tools NSLOOKUP Check the DNS information of the host and whether the domain name resolution of the host is normal