This document outlines the recommended spare parts for three cabinet types: power distribution cabinets, marshaling/barrier/relay cabinets, and DCS/PLC/computer cabinets. For each cabinet type, it lists common components and recommends a percentage of spares needed, with most components requiring at least one spare minimum or 100% spares. It also notes that vendor recommendations should be followed for any parts not listed.
This document outlines the recommended spare parts for three cabinet types: power distribution cabinets, marshaling/barrier/relay cabinets, and DCS/PLC/computer cabinets. For each cabinet type, it lists common components and recommends a percentage of spares needed, with most components requiring at least one spare minimum or 100% spares. It also notes that vendor recommendations should be followed for any parts not listed.
This document outlines the recommended spare parts for three cabinet types: power distribution cabinets, marshaling/barrier/relay cabinets, and DCS/PLC/computer cabinets. For each cabinet type, it lists common components and recommends a percentage of spares needed, with most components requiring at least one spare minimum or 100% spares. It also notes that vendor recommendations should be followed for any parts not listed.
This document outlines the recommended spare parts for three cabinet types: power distribution cabinets, marshaling/barrier/relay cabinets, and DCS/PLC/computer cabinets. For each cabinet type, it lists common components and recommends a percentage of spares needed, with most components requiring at least one spare minimum or 100% spares. It also notes that vendor recommendations should be followed for any parts not listed.
100% • Fuse 5%-Min one • Fuse Holder 5%-Min one • Switch 50% • Lamp 12 5%-Min one • Lamp Holder One • Voltmeter One • Amp. Meter 10%-Min one • Terminal 10%-Min one • Lamp Cover Marshaling, Barrier and Relay Cabinet 10%-Min one • Barrier One • Barrier Base Unit 10%-Min one • Alarm Module(Monitor Switch) 10%-Min one • Circuit Breaker 100% • Fuse 5%-Min one • Fuse Holder 13 10%-Min one • Relay 5%-Min one • Relay Base Unit 10%-Min one 10%-Min one • Terminal and Accessory One set • Cable Shoe • Label For Cable DCS, PLC, Computer and ESD Reference shall be made to Vendor Recommendation 14 Notes: 1- It is necessary to have 100% spare for Gasket and O-Ring in all items. 15 2- For other instruments which are not included in this spare part table, reference shall be made to Vendor Recommendation.