Professional Documents
Culture Documents
Set-S-3 (Ipc) - 09 06 12
Set-S-3 (Ipc) - 09 06 12
Set-S-3 (Ipc) - 09 06 12
***********************************************************************
LIQUID PENETANT TESTING (SPECIFICATION) LEVEL-(II)
a. Once in a year
b. Whenever the meter has been subjected to repair
c. If meters have not been in use for a year or more, they shall be calibrated before being used again
d. All of the above are applicable
Q.2. The minimum visible light intensity required for proper evaluation of Visible Penetrant
indications are:-
Q.3. Which of the following is not permitted as regards drying of the test surface after Aqueous
developer Application?
Q.5. What is the recommended penetrant dwell time for carbide tipped tool to detect
Discontinuities such as porosity cracks and lack of fusion(Job temperature 25˚C)
a. 1 Minute c. 7 Minute
b. 5 Minute d. 10 Minute
Q.6. Which of the following statements is/are applicable for interpretation of indication after application of
developer?
***********************************************************************
Q.7. In fluorescent penetrant technique, the black light intensity measured should be minimum?
Q.9. A commonly used method of checking of overall performance of a penatrant material system is by:-
Q.15. For application of Non Aqueous Developer, most suitable method is by:-
a. Brushing c. Dusting
b. Pouring d. Spraying.