Professional Documents
Culture Documents
B237 Option2 (20 10 2022)
B237 Option2 (20 10 2022)
Project no:
Author:
Project data
Project name
Project number
Author
Description
Date 19-10-2022
Design code AISC 360-16
Material
Steel A36, A529, Gr. 50
1 / 24
Project:
Project no:
Author:
Design
Name CON1
Description
Analysis Stress, strain/ simplified loading
Design code AISC - LRFD 2016
Cross-sections
Name Material
1 - CON1(W(Imp)14X145) A529, Gr. 50
2 - CON1(W(Imp)30X90) A529, Gr. 50
Bolts
Diameter fu Gross area
Name Bolt assembly
[mm] [MPa] [mm2]
24 A325M 24 A325M 24 830.0 452
2 / 24
Project:
Project no:
Author:
Check
Summary
Name Value Check status
Analysis 100.0% OK
Plates 2.4 < 5.0% OK
Bolts 112.0 > 100% Not OK!
Welds 0.0 < 100% OK
Buckling Not calculated
Plates
fy Thickness σEd εPl σcEd
Name Loads Check status
[MPa] [mm] [MPa] [%] [MPa]
C-bfl 1 344.0 27.7 LE1 311.6 1.0 118.4 OK
C-tfl 1 344.0 27.7 LE1 205.4 0.0 0.0 OK
C-w 1 344.0 17.3 LE1 310.1 0.2 0.0 OK
B-bfl 1 344.0 15.5 LE1 309.7 0.1 0.0 OK
B-tfl 1 344.0 15.5 LE1 309.9 0.2 0.0 OK
B-w 1 344.0 11.9 LE1 257.3 0.0 0.0 OK
EP1 344.0 16.0 LE1 314.4 2.4 117.8 OK
WID1a 344.0 12.0 LE1 314.0 2.2 0.0 OK
WID1b 344.0 12.0 LE1 310.8 0.6 0.0 OK
Design data
fy εlim
Material
[MPa] [%]
A529, Gr. 50 344.0 5.0
3 / 24
Project:
Project no:
Author:
4 / 24
Project:
Project no:
Author:
Bolts
Ft V ϕRn,bearing Utt Uts Utts
Shape Item Grade Loads Status
[kN] [kN] [kN] [%] [%] [%]
B1 24 A325M - 1 LE1 174.6 25.2 333.2 83.1 20.0 - OK
B2 24 A325M - 1 LE1 174.6 25.1 333.2 83.1 19.9 - OK
B3 24 A325M - 1 LE1 178.8 21.1 333.2 85.1 16.7 - OK
B4 24 A325M - 1 LE1 179.1 20.6 333.2 85.2 16.3 - OK
B5 24 A325M - 1 LE1 234.2 7.7 333.2 111.4 6.1 - Not OK!
B6 24 A325M - 1 LE1 235.5 7.6 333.2 112.0 6.1 - Not OK!
B7 24 A325M - 1 LE1 221.6 37.9 333.2 105.4 30.1 105.5 Not OK!
B8 24 A325M - 1 LE1 220.5 38.3 333.2 104.9 30.4 105.3 Not OK!
B9 24 A325M - 1 LE1 170.8 50.3 262.5 81.3 39.9 90.2 OK
B10 24 A325M - 1 LE1 170.8 50.3 262.5 81.2 39.9 90.2 OK
B11 24 A325M - 1 LE1 96.2 16.6 333.2 45.8 13.1 - OK
B12 24 A325M - 1 LE1 96.2 16.5 333.2 45.8 13.1 - OK
B13 24 A325M - 1 LE1 18.1 15.3 333.2 8.6 12.2 - OK
B14 24 A325M - 1 LE1 18.1 15.3 333.2 8.6 12.1 - OK
B15 24 A325M - 1 LE1 0.0 20.4 333.2 0.0 16.2 - OK
B16 24 A325M - 1 LE1 0.0 20.4 333.2 0.0 16.2 - OK
B17 24 A325M - 1 LE1 0.0 41.4 333.2 0.0 32.8 - OK
B18 24 A325M - 1 LE1 0.0 41.3 333.2 0.0 32.8 - OK
B19 24 A325M - 1 LE1 5.1 45.5 333.2 2.4 36.0 - OK
B20 24 A325M - 1 LE1 5.1 45.5 333.2 2.4 36.0 - OK
5 / 24
Project:
Project no:
Author:
Design data
ϕRn,tension ϕRn,shear
Grade
[kN] [kN]
24 A325M - 1 210.2 126.1
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 73 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
combined stresses need not to be investigated.
6 / 24
Project:
Project no:
Author:
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 73 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
combined stresses need not to be investigated.
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
ϕ = 0.75 – resistance factor
7 / 24
Project:
Project no:
Author:
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 73 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
combined stresses need not to be investigated.
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
8 / 24
Project:
Project no:
Author:
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 73 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
d = 24 mm – diameter of a bolt
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 284 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
9 / 24
Project:
Project no:
Author:
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
ϕ = 0.75 – resistance factor
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 219 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
d = 24 mm – diameter of a bolt
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
10 / 24
Project:
Project no:
Author:
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 73 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
d = 24 mm – diameter of a bolt
Where:
′ = 619.5 MPa – nominal tensile stress modified to include the effects of shear stress:
Fnt
nt
ϕ⋅Fnv nt
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
frv = 83.9 MPa – required shear stress using LRFD or ASD load combinations. The available shear
stress of the fastener shall be equal or exceed the required shear stress.
ϕ = 0.75 – resistance factor for tension and shear combination
11 / 24
Project:
Project no:
Author:
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 73 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
d = 24 mm – diameter of a bolt
Where:
′ = 617.8 MPa – nominal tensile stress modified to include the effects of shear stress:
Fnt
nt
ϕ⋅Fnv nt
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
frv = 84.7 MPa – required shear stress using LRFD or ASD load combinations. The available shear
stress of the fastener shall be equal or exceed the required shear stress.
ϕ = 0.75 – resistance factor for tension and shear combination
12 / 24
Project:
Project no:
Author:
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 38 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
b 189.3 kN ≥ Ft = 170.8 kN
Where:
′ = 558.5 MPa – nominal tensile stress modified to include the effects of shear stress:
Fnt
nt
ϕ⋅Fnv nt
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
frv = 111.4 MPa – required shear stress using LRFD or ASD load combinations. The available shear
stress of the fastener shall be equal or exceed the required shear stress.
ϕ = 0.75 – resistance factor for tension and shear combination
13 / 24
Project:
Project no:
Author:
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
ϕ = 0.75 – resistance factor
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 38 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
b 189.4 kN ≥ Ft = 170.8 kN
Where:
′ = 558.6 MPa – nominal tensile stress modified to include the effects of shear stress:
Fnt
nt
ϕ⋅Fnv nt
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
frv = 111.3 MPa – required shear stress using LRFD or ASD load combinations. The available shear
stress of the fastener shall be equal or exceed the required shear stress.
ϕ = 0.75 – resistance factor for tension and shear combination
14 / 24
Project:
Project no:
Author:
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 73 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
combined stresses need not to be investigated.
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
15 / 24
Project:
Project no:
Author:
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 73 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
16 / 24
Project:
Project no:
Author:
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 200 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 199 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
d = 24 mm – diameter of a bolt
17 / 24
Project:
Project no:
Author:
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
combined stresses need not to be investigated.
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 211 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
18 / 24
Project:
Project no:
Author:
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 206 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
combined stresses need not to be investigated.
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
19 / 24
Project:
Project no:
Author:
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 73 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
20 / 24
Project:
Project no:
Author:
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 73 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 73 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
21 / 24
Project:
Project no:
Author:
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
combined stresses need not to be investigated.
Where:
Fnt = 620.0 MPa – nominal tensile stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Where:
Fnv = 372.0 MPa – nominal shear stress from AISC 360-16 Table J3.2
Ab = 452 mm2
– gross bolt cross-sectional area
Rn = 1.20 ⋅ lc ⋅ t ⋅ Fu ≤ 2.40 ⋅ d ⋅ t ⋅ Fu
Where:
lc = 73 mm
– clear distance, in the direction of the force, between the edge of the hole and the edge of the
adjacent hole or edge of the material
t = 16 mm – thickness of the plate
The required stress, in either shear or tension, is less than or equal to 30% of the corresponding available stress and the effects of
22 / 24
Project:
Project no:
Author:
Weld sections
Th Ls L Lc Fn ϕRn Ut
Item Edge Xu Loads Status
[mm] [mm] [mm] [mm] [kN] [kN] [%]
EP1 B-bfl 1 E70xx - - 264 - - - - - OK
EP1 B-tfl 1 E70xx - - 264 - - - - - OK
EP1 B-w 1 E70xx - - 735 - - - - - OK
EP1 WID1a E70xx - - 200 - - - - - OK
B-tfl 1 WID1a E70xx - - 200 - - - - - OK
EP1 WID1b E70xx - - 200 - - - - - OK
B-bfl 1 WID1b E70xx - - 200 - - - - - OK
Butt welds are not checked. Their resistance is assumed to be the same as that of the welded member.
Buckling
Buckling analysis was not calculated.
Symbol explanation
Symbol Symbol explanation
εPl Strain
fy Yield strength
εlim Limit of plastic strain
Ft Tension force
V Resultant of shear forces Vy, Vz in bolt
ϕRnBearing Plate bearing resistance AISC 360-16 J3.10
Ut Utilization
Uts Utilization in shear
Utts Utilization in tension and shear EN 1993-1-8 table 3.4
ϕRnBearing Bolt bearing resistance
ϕRnShear Bolt shear resistance AISC 360-16 – J3.8
Th Throat thickness of weld
Ls Leg size of weld
L Length of weld
Lc Length of critical weld element
Fn Force in weld critical element
ϕRnw Weld resistance AISC 360-16 J2.4
Code settings
Item Value Unit Reference
Friction coefficient - concrete 0.40 - ACI 349 – B.6.1.4
Friction coefficient in slip-resistance 0.30 - AISC 360-16 J3.8
23 / 24
Project:
Project no:
Author:
24 / 24