Professional Documents
Culture Documents
DBS Drilling Monitoring System (DBS) User Manual
DBS Drilling Monitoring System (DBS) User Manual
1
CONTENTS
1.3.3 Login.............................................................................................................. 9
2
Outline of System
3.3 Specification....................................................................................................... 16
5. HYD Control.................................................................................................................... 20
5.3 Specification....................................................................................................... 21
6. MP Operation ................................................................................................................. 21
4
Outline of System
query, historical query, trendline formation, by accessing OPC server and database.
DrillingSystem2008 namely.
2. Operational Environment
Operating system: Window XP SP2,2600 and the further edition
Hardware configuration:
3. Function List
Drilling Systems2008 Function List
User-defined parameter
6 Display common parameters and status
displaying
Timing database
9 Optimize database at 2:00 every day
optimization
Switchover between
10 Display parameters in metric/English unit
metric/English units
Systems2008 、SQL Server 2005 and Simatic Net2008. Because of long installation
time and difficult configuration, these software have been installed on industrial
computer before delivery; and one set of system recovery disc enclosed, which is
After entering installation folder, the following three files can be found, click
suggestion will appear. Enter system at the desktop or quick starting bar.
7
1. Startup Interface
system conveniently.
8
Outline of System
1.3.2 Exit
1.3.3 Login
system. After inputting user name and password, click “Check”, if they
9
1.3.4 Language setting
This is to
select system language from Chinese, English, and Russion.
Set unit for system data: metric as default. Partial analogs can be
This is
10
Outline of System
otherwise, test will be operated, SQL server still cannot work after 2mins:
: normal : abnormal
1.3.13 Enter
2. Main Interface
to main interface:
12
Outline of System
There includes three parts: the upper title column, middle operating
weight, WOB, hook speed, cathead pressure, pump stroke, torque, voltage;
2.3.1Company’s logo
13
2.3.2 Parameter modification
Click icon:
14
Outline of System
3. Motor Interface
15
3.2 General description
Display the parameters of DW, RT, TD, etc equipments and auto-bit feed.
3.3 Specification
Click to
switch over
e.g.: DW signal
16
Motor Interface
In the above picture, all equipments and alarm signal are gray, which means they are
non-activated; if DWA blower, lube pump and lock out running, display green; and if
All parameters and status can be modified in the conditions of having enough
rights.
17
4. Generator Interface
18
Generator Interface
The above picture shows service condition of all generators when they work
normally.
Generator parameters:
19
4.3.3. User-defined setting
enough rights.
5. HYD Control
20
Real Time Trend View Interface
5.3 Specification
6. MP Operation
21
6.2 General Description
There are two parts in this interface: mud tank and mud pump
Only 6 of 12 mud tanks can be observed, switch over between 1-6 mud
22
Real Time Trend View Interface
23
6.3.3 User-defined setting
enough rights.
7. Real-time Trendline
24
Real Time Trend View Interface
There are 4 defaulted trendlines and 900 grids, which can be modified
25
Common parameters are listed here; after selecting, click “OK” to get
relevant trendline.
query
26
Real Time Trend View Interface
There are three parts: the upper chosen parameter, middle data sort
list, and bottom variable list. After selecting sort and clicking “Search”,
EmptyHook_WeightSet”:
27
7.3.3 Continuous print function
This program can print trendline continuously, only need to set paper,
28
Real Time Trend View Interface
In this dialog, may set paper size, print orientation, paper margin and
, meanwhile,
29
interval:
30
Data Query and Historical Trend Interface
After having queried for all historical data, faults, parameters are
“Drilling Data Query” is the most important interface for operating data. It
Input fault time range to know the fault happened in this range, and click
31
“Fault query” to start searching. Detailed operations as follows:
, other range
No matter fault query or historical data query, the time range can be
selected in
32
Data Query and Historical Trend Interface
Click the up/down icon to choose time, and “OK” to finish time setting.
33
8.3.1.4 Troubleshooting
Faults will be displayed in form: the first list is fault time, the second is
fault description, and the third is help information for fault. Double click
one cell, relevant fault description and help will be showed at the top
: Time
34
Data Query and Historical Trend Interface
The operation of selecting time is same as that of fault query, but the
8.3.2.2 Interval
1 day:1,10,30,60 ,120,300,600,1200
Click :
35
to switch over. A maximum of 30 parameters can be selected
simultaneously.
36
Data Query and Historical Trend Interface
clicking .
37
8.3.3.1 Trendline generation
most 4 parameters at one time, and click “OK” to load into trendline
38
Data Query and Historical Trend Interface
As the above picture shows: total data pieces (3) is 1541, and click
“OK” to display the 3 time intervals (1). Horizontal girds of current page
For example, set grids to 400, then it divided into 2 pages (4).
8.3.3.2 Print
On the premise of installing printer, including ink box, paper, etc. Click
40
Alarm and Fault Interface
Display the time and description of alarm; page refreshes per 5 seconds; click “Help”
Display the alarm of real-time fault, which is used for examining alarm and help
41
information. E.g. when alarm appears, user may view the relevant help information, just
choose alarming message, and click “Help” icon or double click this message:
42
User-defined Interface
43
10.3 Specification of interface
10.3.1 Names
Name 1-6 show the Chinese name (2), English name (2), Russian name (2):
0: current data
10.3.3 Help
44
User-defined Interface
45
Use user-defined method to query non-included data: input partial key
46
User-defined Interface
47
48
Main Line View Interface
Fault List
49
报警内容(中文) 英文描述
绞车 A 变频器故障,电机不能启动或电机停止 DWA_Fault
绞车 A 变频器过流故障,电机不能启动或电机停止 DWA_Inverter_OverCurrent
绞车 A 变频器直流电压过压故障,电机不能启动或电机
停止 DWA_Inverter_DCOverVolt
绞车 A 变频器直流电压欠压故障,电机不能启动或电机
停止 DWA_Inverter_DCUnderVolt
绞车 A 变频器接地故障,电机不能启动或电机停止 DWA_Inverter_EarthFault
绞车 A 变频器超速故障,电机不能启动或电机停止 DWA_Inverter_OverFreq
绞车 A 变频器 PPCC LINK 故障,电机不能启动或电机停
止 DWA_Inverter_PPCC_Link
绞车 A 电机堵转故障,电机不能启动或电机停止 DWA_Motor_Stall
绞车 A 电机缺相故障,电机不能启动或电机停止 DWA_Motor_Phase
绞车 A 编码器报警 DWA_EncoderAlarm
绞车 A 通道 2 通信丢失报警 DWA_CH2_Loss_Alarm
绞车 A 变频器被置为本地模式,绞 A 电机不能启动或电
DWA_LocalModeAlarm
机停止
绞车 B 变频器故障,电机不能启动或电机停止 DWB_Fault
绞车 B 变频器过流故障,电机不能启动或电机停止 DWB_Inverter_OverCurrent
绞车 B 变频器直流电压过压故障,电机不能启动或电机
停止 DWB_Inverter_DCOverVolt
绞车 B 变频器直流电压欠压故障,电机不能启动或电机
停止 DWB_Inverter_DCUnderVolt
绞车 B 变频器接地故障,电机不能启动或电机停止 DWB_Inverter_EarthFault
绞车 B 变频器超速故障,电机不能启动或电机停止 DWB_Inverter_OverFreq
绞车 B 变频器 PPCC LINK 故障,电机不能启动或电机停
止 DWB_Inverter_PPCC_Link
绞车 B 电机堵转故障,电机不能启动或电机停止 DWB_Motor_Stall
绞车 B 电机缺相故障,电机不能启动或电机停止 DWB_Motor_Phase
绞车 B 编码器报警 DWB_EncoderAlarm
绞车 B 通道 2 通信丢失报警 DWB_CH2_Loss_Alarm
绞车 B 变频器被置为本地模式,绞 B 电机不能启动或电
DWB_LocalModeAlarm
机停止
绞车 A 检修开关故障,绞车不能启动或绞车停止 DWA_LockOut_Fault
绞车 B 检修开关故障,绞车不能启动或绞车停止 DWB_LockOut_Fault
绞车 A 风压报警,绞车 A 不能启动 DWA_Start_BlowerAlarm
绞车 A 风压报警,绞车 A 将在 X 秒内停止电机 DWA_Run_BlowerAlarm
绞车 B 风压报警,绞车 B 不能启动 DWB_Start_BlowerAlarm
绞车 B 风压报警,绞车 B 将在 X 秒内停止电机 DWB_Run_BlowerAlarm
绞车油泵 1 油压低报警,绞车不能启动 DW_Start_Oiler1Alarm
绞车油泵 1 油压低报警,绞车将在 X 秒内停止电机 DW_RunOiler1Alarm
50
Main Line View Interface
51
顶驱失风报警,顶驱将在 X 秒内停止电机 TD_Run_BlowerAlarm
顶驱油泵油压低报警,顶驱不能启动 TD_Start_OilerAlarm
顶驱油泵油压低报警,顶驱将在 X 秒内停止电机 TD_Run_OilerAlarm
顶驱系统发来用于保护顶驱的清绞车提升信号,游车不
TD_CleanDWHoistAlarm
能移动
顶驱提升报警且大钩高度不小于 65ft,游车不能向上移
DWHighter65ft
动
顶驱井控阀未打开,不能给定泵冲 TD_LWCV_Alarm
泥浆泵 1 变频器故障,泥浆泵 1 电机不能启动或电机停
MP1_Fault
止
泥浆泵 1 变频器过流故障,电机不能启动或电机停止 MP1_Inverter_OverCurrent
泥浆泵 1 变频器直流电压过压故障,电机不能启动或电
机停止 MP1_Inverter_DCOverVolt
泥浆泵 1 变频器直流电压欠压故障,电机不能启动或电
机停止 MP1_Inverter_DCUnderVolt
泥浆泵 1 变频器接地故障,电机不能启动或电机停止 MP1_Inverter_EarthFault
泥浆泵 1 变频器超速故障,电机不能启动或电机停止 MP1_Inverter_OverFreq
泥浆泵 1 变频器 PPCC LINK 故障,电机不能启动或电机
停止 MP1_Inverter_PPCC_Link
泥浆泵 1 电机堵转故障,电机不能启动或电机停止 MP1_Motor_Stall
泥浆泵 1 电机缺相故障,电机不能启动或电机停止 MP1_Motor_Phase
泥浆泵 2 变频器故障,泥浆泵 2 电机不能启动或电机停
MP2_Fault
止
泥浆泵 2 变频器过流故障,电机不能启动或电机停止 MP2_Inverter_OverCurrent
泥浆泵 2 变频器直流电压过压故障,电机不能启动或电
机停止 MP2_Inverter_DCOverVolt
泥浆泵 2 变频器直流电压欠压故障,电机不能启动或电
机停止 MP2_Inverter_DCUnderVolt
泥浆泵 2 变频器接地故障,电机不能启动或电机停止 MP2_Inverter_EarthFault
泥浆泵 2 变频器超速故障,电机不能启动或电机停止 MP2_Inverter_OverFreq
泥浆泵 2 变频器 PPCC LINK 故障,电机不能启动或电机
停止 MP2_Inverter_PPCC_Link
泥浆泵 2 电机堵转故障,电机不能启动或电机停止 MP2_Motor_Stall
泥浆泵 2 电机缺相故障,电机不能启动或电机停止 MP2_Motor_Phase
泥浆泵 1 检修开关故障,泥浆泵 1 电机不能启动或电机
MP1_LockOut_Fault
停止
泥浆泵 2 检修开关故障,泥浆泵 2 电机不能启动或电机
MP2_LockOut_Fault
停止
泥浆泵 1 风压报警,泥浆泵 1 电机不能启动 MP1_Start_BlowerAlarm
泥浆泵 2 风压报警,泥浆泵 2 电机不能启动 MP2_Start_BlowerAlarm
泥浆泵 1 失风报警,将在 X 秒内停止泥浆泵 1 电机 MP1_Run_BlowerAlarm
泥浆泵 2 失风报警,将在 X 秒内停止泥浆泵 2 电机 MP2_Run_BlowerAlarm
52
Main Line View Interface
绞车失速报警,滚筒抱闸且停止绞车 DW_RPM_OverSpeed_Alarm
滚筒保护罩被揭开,行程开关动作,绞车和绞车辅助不
能启动(启动时)或滚筒抱闸,绞车、绞车辅助停止(运 Drum_TravelSwitchAlarm
行中)
电磁刹车主电源未送电,绞车和绞车辅助不能启动(启
ELM_BrakeNoPowerAlarm
动时)或滚筒抱闸,绞车、绞车辅助停止(运行中)
DSU 整流开关未合闸或跳闸,绞车不能启动或滚筒抱闸
DSU_Alarm
且绞车电机停止
供电系统(发电机)掉电保护报警,滚筒抱闸且绞车或
LosePowerAlarm
绞车辅助停止
紧急刹车报警,滚筒抱闸 EmergencyBrakeAlarm
传动急停报警,整流柜不能合闸或跳闸,滚筒抱闸且所
DriveStopAlarm
有电机不能启动或电机停止
系统急停报警,发电机供电系统掉电,所有电机停止 SystemStopAlarm
液压站急停报警,滚筒抱闸 HPU_E_Stop_Alarm
53
驻车制动报警,大钩不能移动。 HaltVehicleStopAlarm
液压站回油滤油器阻塞导致回油压力高于 0.4MPa,污染
POLLITION_Alarm
报警
机具液压站液位低报警 HYD_LevelLow_Alarm
机具液压站液位低于 530mm,液位低报警 HYD_LevelLow530_Alarm
机具液压站液位超低报警,机具泵停止或不能启动 HYD_LevelOverLow_Alarm
液压站液位低于 380mm,机具泵、刹车泵电机停止或不
HYD_LevelLow380_Alarm
能启动
液压站液位高报警 HYD_LevelHigher590_Alarm
液压站液位高于 980mm,液位高报警 HYD_LevelHigher980_Alarm
液压站油温高故障,绞车和绞车辅助不能启动(启动时)
HYD_OilTemHigher_Fault
或滚筒抱闸,绞车、绞车辅助停止(运行中)
液压站油温超高报警,机具泵电机停止 HYD_OilTemHigher_Alarm
液压站油温高于 70℃报警,检查冷却风机 HYD_OilTemHigher70_Alarm
液压站油温高报警,自动启动冷却风机 HYD_OilTemHigh_Alarm
HYD_OilTem50_Alarm
液压站油温低故障,自动启动加热器和循环油泵 HYD_OilTemLow_Fault
HYD_OilTem35_Alarm
HPU10minNoSignal_Alarm
安全钳压力小于 7.5MPa,游车不能移动 SafeTongPressLow75Alarm
工作钳压力大于 0.2MPa,游车不能移动 SeverTongPressHigh02Alarm
液压站不是远程模式,在触摸屏上不能控制液压站操作 HPU_NoRemote_Alarm
400V/480V 接地故障 Ground400V_Fault
A 段 600V 接地故障 Ground600V_A_Fault
B 段 600V 接地故障 Ground600V_B_Fault
A 段 220V 接地故障 Ground220V_A_Fault
B 段 220V 接地故障 Ground220V_B_Fault
A 段 380V 接地故障 Ground380V_A_Fault
B 段 380V 接地故障 Ground380V_B_Fault
发电机组 1 冷却液温度高报警 GEN1CoolTempHighAlarm
发电机组 1 机油压力低报警 GEN1OilPressureLowAlarm
发电机组 1 冷却液液位低报警 GEN1CoolLevelLowAlarm
发电机组 2 冷却液温度高报警 GEN2CoolTempHighAlarm
发电机组 2 机油压力低报警 GEN2OilPressureLowAlarm
发电机组 2 冷却液液位低报警 GEN2CoolLevelLowAlarm
发电机组 3 冷却液温度高报警 GEN3CoolTempHighAlarm
发电机组 3 机油压力低报警 GEN3OilPressureLowAlarm
发电机组 3 冷却液液位低报警 GEN3CoolLevelLowAlarm
发电机组功率分配不平衡报警 GEN_PowerNoBalance
发电机组电流分配不平衡报警 GEN_CurrentNoBalance
发电机组功率超限报警 PowerLimit_Alarm
发电机功率超 85%报警 PowerOver85_Alarm
54
Main Line View Interface
55
有毒气体浓度过高报警 GassAlarm
悬重超过设定的上限值报警 HookLoadUpperLimitAlarm
悬重低于设定的下限值报警 HookLoadLowerLimitAlarm
出口排量超过设定的上限值报警 FlowOutUpperLimitAlarm
出口排量低于设定的下限值报警 FlowOutLowerLimitAlarm
VFD(SCR)房温度超过 60℃报警 VFD(SCR)TempatureAlarm
VFD(SCR)房湿度超过 85%报警,整流柜不能合闸 VFD(SCR)HumidityAlarm
MCC 房温度超过 60℃时报警 MCCTempatureAlarm
MCC 房湿度超过 85%报警 MCCHumidityAlarm
泄漏电流超过允许值报警,相关断路器将跳闸 RCQ_Alarm
电抗器失风报警 ReactanceBlowerAlarm
电磁刹车风机失风、温度高报警 ELMBrakeBlowerPressAlarm
通道切换报警,触摸屏上所有操作将被终止,触摸屏显
ChannelSwitchAlarm
示#号,大概 30 秒左右恢复正常
平台供电系统急停 1,系统将立即停电,所有电机将被
Platform_ESD1
停止
平台供电系统急停 2,系统将在 15 分钟后停电,并停止
Platform_ESD2
所有电机。
绞车辅助运行中,绞车不能启动 BF_Forbid_DW_Start
绞车运行中,绞车辅助不能启动 DW_Forbid_BF_Start
绞车辅助速度钻进模式运行中,绞车辅助自动送钻不能
BFRef_Forbid_BFWob
启动
绞车辅助自动送钻运行中,绞车辅助速度钻进模式不能
BFWob_Forbid_BFRef
启动
单绞车运行中,双绞车不能启动 SingleDW_Forbid_DoubleDW
双绞车运行中,单绞车不能启动 DoubleDW_Forbid_SingleDW
单绞车运行中,绞车自动送钻不能启动 SingleDW_Forbid_DWWob
双绞车运行中,绞车自动送钻不能启动 DoubleDW_Forbid_DWWob
绞车自动送钻运行中,单绞车不能启动 DWWob_Forbid_SingleDW
绞车自动送钻运行中,双绞车不能启动 DWWob_Forbid_DoubleDW
水龙头不能启动 SwivelNoStart
FM200 公共报警 FM200_Common_Alarm
FM200 电源故障 FM200_Power_Fault
顶驱主电机温度高报警 TDMainMotorTempHighAlarm
顶驱液压站液位低于 150mm,液位低报警 TDHPU_LevelLow150_Alarm
顶驱液压站液位高于 560mm,液位高报警 TDHPU_LevelHigher560_Alarm
顶驱液压站油温高于 80℃报警,顶驱液位站主电机停止 TDHPU_OilTemHigher80_Alarm
顶驱液压站油温高于 70℃报警,检查冷却风机 TDHPU_OilTemHigher70_Alarm
顶驱液压站油温高于 60℃报警,自动启动冷却风机 TDHPU_OilTemHigher60_Alarm
顶驱液压站油温降到 50℃ TDHPU_OilTem50_Alarm
TDHPU_OilTem30_Alarm
56
Main Line View Interface
57
钻台硫化氢气体报警 RigFloor_H2S
振动筛罐可燃气体报警 ShakerTankFlammableGas
振动筛罐硫化氢气体报警 ShakerTank_H2S
MTT 硫化氢气体报警 MTT_H2S
MTT 罐可燃气体报警 MTT_FlammableGas
发电机组 1 机油温度高报警 GEN1OilTempHighAlarm
发电机组 2 机油温度高报警 GEN2OilTempHighAlarm
发电机组 3 机油温度高报警 GEN3OilTempHighAlarm
发电机组 4 机油温度高报警 GEN4OilTempHighAlarm
发电机组 5 机油温度高报警 GEN5OilTempHighAlarm
电磁刹车水泵失水、温度高报警 ELMBrakeWaterPressAlarm
泥浆泵 1 整流温度高报警 MP1_SCR_TemperatureAlarm
泥浆泵 2 整流温度高报警 MP2_SCR_TemperatureAlarm
泥浆泵 3 整流温度高报警 MP3_SCR_TemperatureAlarm
冷却水罐高温报警 CoolingWaterTankHighTemp
风机柜 1 故障 FanCabinet1Fault
风机柜 2 故障 FanCabinet2Fault
绞车 A 正转接触器未合闸报警 DWAFWD_ContractorNoClose
绞车 A 反转接触器未合闸报警 DWAREV_ContractorNoClose
转盘正转接触器未合闸报警 RT_FWD_ContractorNoClose
转盘反转接触器未合闸报警 RT_REV_ContractorNoClose
转盘柜断路器掉电报警 RT_BreakerLossPower
顶驱柜断路器掉电报警 TD_BreakerLossPower
MP1 柜断路器掉电报警 MP1_BreakerLossPower
MP2 柜断路器掉电报警 MP2_BreakerLossPower
MP3 柜断路器掉电报警 MP3_BreakerLossPower
泥浆泵 1A 和 B 电机电流不平衡报警 MP1_A_B_CurrentUnbalance
泥浆泵 2A 和 B 电机电流不平衡报警 MP2_A_B_CurrentUnbalance
泥浆泵 3A 和 B 电机电流不平衡报警 MP3_A_B_CurrentUnbalance
顶驱正转接触器未合闸报警 TD_FWD_ContractorNoClose
顶驱反转接触器未合闸报警 TD_REV_ContractorNoClose
发电机1总报警 GEN1_TotalAlarm
发电机2总报警 GEN2_TotalAlarm
发电机3总报警 GEN3_TotalAlarm
变压器1温度高报警 Transfer1TemperatureHigh
变压器2温度高报警 Transfer2TemperatureHigh
变压器3温度高报警 Transfer3TemperatureHigh
悬重超额定值加 10 吨报警并抱闸 HookLoadOverStopAlarm
顶驱内防喷器关闭,不能给定泵冲 IBOP_Close_Alarm
发电机燃油系统压力报警 GENFuelSystemPressAlarm
制动斩波器 1 报警 Chopper1Alarm
制动斩波器 2 报警 Chopper2Alarm
制动斩波器 3 报警 Chopper3Alarm
58
Main Line View Interface
制动斩波器 4 报警 Chopper4Alarm
制动斩波器 5 报警 Chopper5Alarm
制动斩波器 6 报警 Chopper6Alarm
整流柜 1 温度报警 RECT1_TEMP_ALARM
整流柜 2 温度报警 RECT2_TEMP_ALARM
工作钳压力小于6.5Mpa报警 SeverTongPressLowAlarm
钻台液压站低液位故障 RigHPU_LowLevelFault
钻台液压站低液位报警 RigHPU_LowLevelAlarm
钻台液压站高油压报警 RigHPU_HighOilPressAlarm
钻台液压站高油温报警 RigHPU_HighTempAlarm
钻台液压站过载或跳闸报警 RigHPU_OverloadOrTripped
转盘扭矩超 100%报警 RTTorqueOver100Alarm
盘刹液压站油位低报警 DiscBrakeHPULevelLow
盘刹液压站油温高报警 DiscBrakeHPUTempHigh
盘刹液压站不是远程模式,在触摸屏上不能控制盘刹液
DiscBrakeHPUNoRemote
压站操作
悬重超钩载额定值90%报警 HookLoadOverRated90Alarm
泥浆泵 1A 和 B 电机电流不平衡故障,停止泥浆泵电机 MP1AB_CurrentUnbalanceF
泥浆泵 2A 和 B 电机电流不平衡故障,停止泥浆泵电机 MP2AB_CurrentUnbalanceF
泥浆泵 3A 和 B 电机电流不平衡故障,停止泥浆泵电机 MP3AB_CurrentUnbalanceF
绞车手柄失灵报警 DW_HandleFault
盘液压站油温高故障,绞车和绞车辅助不能启动(启动
DiscHPUOilTemHighFault
时)或滚筒抱闸,绞车、绞车辅助停止(运行中)
盘刹液压站油温超高报警,盘刹泵电机停止 DiscHPUOilTemHighAlarm
盘刹液压站油温高报警,自动启动冷却风机 DiscHPUOilTemHigh_Alarm
盘刹液压站油温低故障,自动启动加热器和循环油泵 DiscHPUOilTemLowFault
盘刹液压站液位超低报警,盘刹泵停止或不能启动 DiscHPULevelOverLowAlarm
盘刹液压站油位高报警 DiscHPULevelHigherAlarm
液位传感器 19 低于设定下限报警 PIT19LowerAlarm
液位传感器 19 超设定上限报警 PIT19HighAlarm
液位传感器 20 低于设定下限报警 PIT20LowerAlarm
液位传感器 20 超设定上限报警 PIT20HighAlarm
空压机气源压力低于 6.5MPa 报警 AirCompressorAirPLow65
净化单元报警 PurgeUnitAlarm
螺杆传输泵启动后,无运行反馈 CuttingAugesStartAlarm
泥浆泵且螺杆传输泵手动停止后,10 分钟,螺杆传输泵
未停止 CuttingAugesStopAlarm
59