Professional Documents
Culture Documents
FICHA TECNICA CASE 580-Superm
FICHA TECNICA CASE 580-Superm
TIER II CERTIFIED
Interior rearview mirror Add-on weights 82 in 686 lb* 0.87 yd3 1.03 yd3
(2.08 m) (311 kg) (0.67 m3) (0.79 m3)
2 in (51 mm) retractable seat belt Cab (over canopy) +454 lb (206 kg)
93 in 933 lb* 1.07 yd3 1.25 yd3
Storage compartment w/lid Counterweights +440 lb (200 kg)
(2.36 m) (423 kg) (0.82 m3) (0.96 m3)
+900 lb (408 kg)
Left side storage tray 4 IN 1® Bucket
®
Extendahoe +496 lb (225kg)
82 in 1462 lb 0.85 yd3 1.04 yd3
4WD w/driveshaft guard +283 lb
INSTRUMENTATION (2.08 m) (663 kg) (0.65 m3) (0.80 m3)
(128 kg)
NOTE: *Add 103 lb (47 kg) for bolt-on cutting edge.
Gauges
Engine water temperature
SERVICE CAPACITIES BACKHOE
Converter oil temperature
Fuel Fuel tank 31.4 gal (119 L) Over-center design
Tachometer/hourmeter Optional tank 40 gal (151 L)
Cast, ductile iron boom, and swing tower
Voltmeter Hydraulic system
Open-center hydraulics - Pro Control System
Warning lights Total 31.5 gal (119 L)
17, 940 lb·ft (24 370 N·m) swing torque
Air cleaner restriction Total w/Extendahoe® 33.0 gal
(125 L) Case attachment coupler
Alternator
Reservoir w/filter 14.5 gal (54.9 L) Foot-swing w/3 lever control
A/C low/high pressure
Reservoir w/o filter 14.0 gal (53 L)
Cold start Wing stabilizers w/cleated dirt pad
Engine oil pressure Transmission
Backhoe Bucket Sizes
Hydraulic oil filter bypass 2WD Total system 19.5 qt (18.5 L)
Width Weight Heaped
Parking brake 4WD Total system 22.0 qt (20.8 L)
Universal Buckets
Rear axle fluid temperature sensing system 4WD Front axle
12 in 290 lb 3.40 ft3
Low fuel Differential 5.8 qt (5.5 L) (305 mm) (132 kg) (0.10 m3)
Audible alarms Planetaries (each) 0.7 qt (0.66 L) 16 in 346 lb 3.60 ft3
Coolant temperature Rear axle (406 mm) (157 kg) (0.10 m3)
Engine oil pressure Differential 15.0 qt (14.2 L) 18 in 350 lb 5.30 ft3
(457 mm) (159 kg) (0.15 m3)
Parking brake engagement Planetaries (each) 1.6 qt (1.5 L)
24 in 413 lb 7.70 ft3
Shuttle engagement/seat position Engine oil w/filter 14.4 qt (13.6 L) (610 mm) (187 kg) (0.22 m3)
Backup alarm
Cooling system 30 in 475 lb 10.20 ft3
Turn signal indicators w/heater 19.0 qt (18.0 L) (762 mm) (215 kg) (0.29 m3)
Horn - dual switched front & rear w/o heater 18.3 qt (17.3 L) 36 in 535 lb 12.70 ft3
(914 mm) (243 kg) (0.36 m3)
Window washer reservoir 2.5 qt
High Capacity Buckets
(2.36 L)
TURNING DIAMETER 24 in 450 lb 8.50 ft3
(610 mm) (204 kg) (0.24 m3)
2WD
Brakes on 21 ft 3 in (6.48 m) 30 in 517 lb 10.60 ft3
(762 mm) (235 kg) (0.30 m3)
Brakes off 24 ft 8 in (7.52 m)
4WD – engaged
Brakes on 22 ft 1 in (6.72 m)
Brakes off 28 ft 3 in (8.62 m)
4WD – disengaged
Brakes on 22 ft 0 in (6.70 m)
Brakes off 25 ft 3 in (7.70 m)
NOTE: Turning diameter dimensions curb to curb 580 Super M Page 2 of 6
w/general purpose bucket.
J
N B
E
H
O L K
M
LOADER DIMENSIONS
General Purpose Bucket* 4 IN 1® Bucket
A. Overall operating height – fully raised 13 ft 11 in (4.25 m) 14 ft 3 in (4.34 m)
Height to –
B. Bucket hinge pin fully raised 11 ft 2 in (3.4 m) 11 ft 2 in (3.4 m)
C. Bucket hinge pin @ SAE carry 13.1 in (334 mm) 14.6 in (372 mm)
D. Dump angle @ full height 45° 45°
E. Dump clearance @ full height, 45° dump –
Bucket 8 ft 10 in (2.69 m) 8 ft 11 in (2.72 m)
Clam open NA 9 ft 8 in (2.95 m)
F. Dump reach @ full height, 45° dump –
Bucket 30.0 in (763 mm) 27.8 in (707 mm)
Clam open NA 14.3 in (362 mm)
Bucket rollback –
G. @ groundline 40° 40°
H. @ SAE carry 45° 45°
J. @ full height Adjustable Adjustable
K. Digging depth below grade –
Bucket flat 5.9 in (149 mm) 6.8 in (180 mm)
Clam open (dozing) NA 4.4 in (111 mm)
L. Reach from front axle centerline – bucket on ground 77.6 in (1.97 m) 75.2 in (1.91 m)
Lift capacity to full height 6,182 lb (2804 kg) 5,514 lb (2501 kg)
Breakout force –
Lift cylinders 9,164 lbf (40 760 N) 8,904 lbf (39 600 N)
Dump cylinders 9,480 lbf (42 170 N) 10,302 lbf (45 820 N)
Bucket cutting edge width 82 in (2.08 m)/93 in (2.36 m) 82 in (2.08 m)
Maximum grading angle 116° 116°
Maximum clam opening NA 38.3 in (972 mm)
Moldboard height NA 36.8 in (934 mm)
Raising time to full height 3.4 sec 3.4 sec
Bucket dumping time 1.5 sec 1.5 sec
Lowering time –
Power down 2.4 sec 2.4 sec
Return-to-dig 3.2 sec 3.2 sec
Clam –
Open time NA 2.3 sec
Close time NA 3.1 sec
CYLINDERS
Bore Diameter Rod Diameter Stroke
Loader
Lift (2) 3.25 in (82.6 mm) 1.75 in (44.5 mm) 30.2 in (766 mm)
Bucket (2) 3.0 in (76 mm) 1.5 in (38.1 mm) 20.6 in (522 mm)
4 IN 1® clam (2) 3.0 in (76 mm) 1.75 in (44.5 mm) 9.1 in (231 mm)
Backhoe
Boom 5.25 in (133.4 mm) 2.50 in (63.5 mm) 33.2 in (842 mm)
Dipperstick 5.0 in (127 mm) 2.5 in (63 mm) 22.9in (583 mm)
Bucket 3.5 in (89 mm) 2.5 in (63 mm) 34.3 in (872 mm)
Extendahoe® 3.0 in (76 mm) 1.75 in (44.5 mm) 42.0 in (1.07 m)
Swing (2) 4.0 in (101.6 mm) 2.0 in (50.8 mm) 11.5 in (292 mm)
Stabilizer (2) 4.0 in (101.6 mm) 2.0 in (50.8 mm) 21.8 in (553 mm)
Steering
2WD 2.75 in (69.9 mm) 1.5 in (38.1 mm) 6.7 in (170 mm)
4WD 2.48 in (63 mm) 1.5 in (38.1 mm) 9.53 in (242 mm)
OPTIONAL EQUIPMENT
OPERATOR’S COMPARTMENT Ride Control Stabilizer pads
Cab with – Cab, right door Flip-over
Heater Canopy Convenience Package Rubber pad
Defroster Front windshield w/wiper & washer Front counterweights
Dome light - door activated 85 dB(A) sound 440 lb (200 kg)
Wipers, front and rear Floor mat 900 lb (408 kg)
Tinted glass Sun visor ENGINE
Floor mat LOADER Cold weather grid heater starting aid
Side window partial hold open Hydraulic attachment coupler Dual, 12-volt, 600CCA batteries
Inside release for side windows Attachment auxiliary hydraulics Fuel tank, 40 gal (151 L)
Operator Convenience Package Buckets (see page 2) Exhaust aspirated air cleaner
Tilt wheel BACKHOE POWERTRAIN
Windshield washer w/adjustable nozzles Case hydraulic coupler 4WD w/outboard planetary drive, on-the-go
(front & rear) push-button activation and 12 x 16.5 front tires
Buckets (see page 2)
Sun visor Powershift transmission with
Extendahoe®
Deluxe Cab Package Autoshift (4WD unit only)
Two-lever control
Operator Convenience Package HYDRAULICS
Pilot Operated Control System
PLUS Auxiliary backhoe uni-directional hydraulics
Fingertip Proportional
Vinyl-covered interior Auxiliary backhoe bi-directional hydraulics
Electrohydraulic stabilizer controls.
Radio-ready kit w/antenna and speakers Hand lever operated for manual controls
Thumb operated Proportional
Reduced sound level to 72 dB(A) Button operated for pilot controls
Electrohydraulic Extendahoe control
Vinyl or cloth-covered mechanical
Thumb operated horn button OTHER
suspension seat
Thumb operated Auxiliary Hydraulic Control 17.5L x 24 rear tires
Air Ride suspension seat
Infinitely Adjustable Towers 19.5L x 24 rear tires
3 in (76 mm) retractable seat belt
In-Cab Switchable “Excavator to Backhoe” Tool box
Cab air-conditioning, 100% filtered air, in-cab
control pattern change Special paint
filter access, 8 adjustable roof vents, 2 floor
vents, w/heater
NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices,
where applicable.
NOTE: All engines meet current EPA emissions requirements.
IMPORTANT: CNH America LLC reserves the right to change these specifications without notice and
without incurring any obligation relating to such change. CNH America LLC does not warrant the
safety or reliability of attachments from other manufacturers.
Case is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association with goods
and/or services of companies other than CNH America LLC, are the property of those respective companies.
www.casece.com